Impulse Bag Sealer

PFS-200/300/400

OPERATING INSTRUCTIONS

2

DEAR CUSTOMMER! Thank you for purchasing our impulse bag sealer. All of ourproducts are designed and manufactured to meet the highest quality requirements.

For effective and safe operation, please read this manual book carefully and keep it for future reference.

When using the device, always follow the safety instructions contained in these operating

instructions.

It is strictly forbidden to make any changes to the design of the device. In case of non-

observance of the operating rules of the device or making any changes to its design, the

equipment is not subject to warranty repair. APPOINTMENT This impulse bag sealer is designed for all heat sealabel materials. SPECIFICATIONS

Supply voltage, V 110

Power consumption, W 300/400/500

Size, in 8/12/16

Sealing Width, mm 5

Weight, kg 1.6/2.2/6

3

PREVENTION OF ACCIDENTS • When use the appliance, do keep the heat seal strip clean for next time use!

• Never wipe the heat seal strip with a wet cloth.

• Replacement kit is a crucial barrier between the heating press part and the bag. Often try to change the old kit could have a better bag sealing for daily use.

• Kit should be replaced when the PTFE(cloth) appears warn, discolored or sealing isn't perfect.

• For proper function of the appliance, regularly check the rubber of the press part for a better sealing after a continuce use.

• Never immerse the body of the appliance in water.

• Never operate this appliance in explosive atmospheres.

• Only use the accessories that came with the package.

• Do not allow children to use the impulse sealer as a toy, special care should be taken when children or persons with disabilities are near the appliance.

• During operation, keep the device at a safe distance from your face and eyes.

• Do not use the appliance if it is faulty.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the appliance. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

• In case of electrical or mechanical malfunction, immediately switch off the appliance and unplug it.

• Before use, check the device to see if it is any damaged or there is any defective accessories.

• The device is intended for power supply of 110V. Do not connect the device to a different voltage.

4

HOW TO USE 1. Put the plug into the power;

2. According to the thickness of bags, adjust the sealing timer to 1-8; and level 3 is enough for most bags;

3. Impulse the press part for sealing;

4. When the signal light is off automatically, keeping the handle pressed down for a few seconds would get optimal results.

MOST IMPORTANT

• The impulse sealer with the patent of overheating protect function, is a perfect sealer to seal Kel-F, Mylar, Polyflex, P.V.A., Polyethylene, Polyurethane, Polyvinylchloride, Polypropylene, Pliofilm, Tivac, Saran and all other heat sealable materials.

• The red light is not predictable when plug into the power. It is only predictable when keep the handle pressed down on bottom. This is a protection for sealer or it will burn out after several uses.

• Level 3 is enough for most applications.

• When seal is done, the red light will go off. Don't release the handle at once and keep the handle pressed down for a few seconds to get optimal results.

• Keep the sealer's surface clean to avoid the oxidation of the residue which will reduce the life of the heat sealing strip.

• The device has the patent of overheating protect function: if the sealer does not work after a period of time, it means the transformer has been in the overheating protect, please reuse the sealer after 10-20 mins rest.