P:262.242.1420 | SPIteam@spilighting.com | Last Revised: 3/15/2022 | Design Rights Reserved | EIW12150 | 1 of 5

INACTIVE SPEC SHEETEcho Round 9.0 LED - Wall

EIW12150 15 in

PROJECT DETAILSJOB NAME:  TYPE:  NOTES:  

DESCRIPTION

Echo Round 9.0 LED is designed to address large, high-ceiling spacessuch as atriums, gymnasiums, natatoriums, recreation pools, libraries,and open offices. It delivers premium indirect lighting with a smooth,uniform, forward throw output. Echo Round 9.0 LED is designed with asolid aluminum housing, encompassing the latest technology in atraditional shape to seamlessly integrate into the space. For acomplimentary lighting layout, contact our applications team atSPIteam@spilighting.com.

FEATURES & BENEFITSStandard top lens corrects color-over-angle discoloration,delivering a clean white beam suitable for highly-finishedceilings and walls

●

IP68 light engines, connectors, and fully potted drivers stand upto harsh natatorium environments

●

Yoke mountings feature formed aluminum yoke brackets whichequip the fixture with durable mounting components that will notrust or corrode

●

All visible fasteners are flush mounted, providing a clean design●

Field adjustable housing locks into position, enabling precisefixture alignment for high-quality design performance

●

Handcrafted in USA●

SPECIFICATIONSLIGHT SOURCE: White LED light engine●

ORIENTATION: For indirect use only●

CRI: 80+●

LUMEN MAINTENANCE: L70 = >50,000 Hrs.●

EFFICACY:  Up to 99 lm/W delivered●

MAX AMBIENT OPERATING TEMP: 28°C (82°F)●

CCT: 3500K or 4000K●

VOLTAGE: 120-277V standard●

DRIVER:  Fully potted integral Class 1 power supply standard●

DIMMING: 0-10V controls standard on LED light engines●

CONSTRUCTION: Extruded aluminum construction providesdurable protection for internal components and is recyclable;

●

P:262.242.1420 | SPIteam@spilighting.com | Last Revised: 3/15/2022 | Design Rights Reserved | EIW12150 | 2 of 5

cast aluminum end caps protect internal components and arerecyclable

FINISH:  Housing and mounting components finished to match.To specify separately, contact factory. Choose from more than30 thermoset polyester powder coat paint colors. RAL®,Pantone®, or custom finishes available upon request.

●

MODIFICATIONS: Consult factory for all modification requests●

APPROVALS: ETL listed to UL standards (US and Canada) foruse in damp locations; not recommended for exteriorapplications

●

DIMENSIONS

W15.1 in38.4 cm

H7.8 in19.8 cm

D8.9 in22.6 cm

Mounting WeightApproximate: 15 lb (7 kg)

CONFIGURATORTo configure your spec sheet online, go to www.spilighting.com/EIW12150. Not all options are available in all configurations; consult factory fordetails.

Required Field *

Catalog

EIW12150Light Source* Primary Finish* Voltage* Lamp Options* Mounting* Accessories Options

A B C D E F

A - LIGHT SOURCE *

To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LEDlampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based onapplication.

L127W | White 127W LED Light Engine

      See last page for finish options

 B - VOLTAGE *

120-277V | Universal Voltage

P:262.242.1420 | SPIteam@spilighting.com | Last Revised: 3/15/2022 | Design Rights Reserved | EIW12150 | 3 of 5

 C - LAMP OPTIONS *

Delivered lumens shown are at 4000K CCT; apply multiplier for delivered lumens at other CCT.

3500K 1 | 3500K CCT

4000K | 4000K CCT

1 Apply .91 multiplier for delivered lumens

 D - MOUNTING *

Hub and Horizontal mounts use a hub canopy at each end to mount over a standard 4" octagonal junction box, auxiliary mounting holes areprovided. Yoke mount features a yoke bracket that runs the full length of the fixture, the 4” octagonal junction box cover is centered on the yokewith auxiliary mounting holes. INSTALLATION NOTES: During installation the contractor is responsible to use actual fixtures to ensure accuratemounting centers from one fixture to the next along the length of the linear run. Choose a mounting from below:

HUB | Hub Mount

HZT | Horizontal Mount

YOK | Yoke Mount

HUB HZT YOK

 E - ACCESSORIES

Cut-Off Shield painted to match housing.

CS | Cut-Off Shield

CS

P:262.242.1420 | SPIteam@spilighting.com | Last Revised: 3/15/2022 | Design Rights Reserved | EIW12150 | 4 of 5

 F - OPTIONS

F | Fusing

P:262.242.1420 | SPIteam@spilighting.com | Last Revised: 3/15/2022 | Design Rights Reserved | EIW12150 | 5 of 5

Available Finishes

Not all finishes are available in all configurations; consult factory for details.

Paint ColorsPT01Super White (Gloss)

PT02White (Textured)

PT03Morning Light (Textured)

PT04Warm White (Textured)

PT05Putty (Textured)

PT06Warm Beige (Textured)

PT07Light Taupe (Textured)

PT08Medium Taupe (Textured)

PT09Medium Grey (Textured)

PT10Dark Grey (Textured)

PT11Black (Textured)

PT12Dark Chocolate (Textured)

PT13Warm Grey (Textured)

PT14Light Grey (Textured)

PT15Sage (Textured)

PT16Spruce (Textured)

PT17Red (Textured)

PT18Deep Red (Textured)

PT19Blue (Textured)

PT20Dark Green (Textured)

PT21Pearl White (Metallic Gloss)

PT22Platinum (Metallic Gloss)

PT27Deep Copper (Metallic Gloss)

PT28Dark Stainless (Metallic Gloss)

PT29Red Brass (Metallic Gloss)

PT31Medium Bronze (MetallicGloss)

PT32Dark Bronze (Metallic Gloss)

PT33Dark Blue (Textured)

PT40Yellow (Textured)

PT41Orange (Textured)

PT42Sky Blue (Textured)

PT43Teal (Textured)

PT44Green (Textured)

PT45Purple (Textured)

PT46Aluminum (Metallic Textured)

PT47Deep Red Brass (MetallicTextured)

PT48Brass (Metallic Textured)

PT49Bronze (Metallic Textured)

PT51Matte White (Textured)