India - Bharat Petroleum - RFQ 6000887598 - Mech... · PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner's storage point to work site/work shop; fabrication including

Material/Services required at:M/s. BHARAT PETROLEUM CORPN. LTDMUMBAI REFINERYMAHUL,MUMBAI - 400074India_______________________________________________________________________Subject :- Balance Civil / Structural, Mechanical, Piping, Insulation &Painting Works for TGTU Project at BPCL Mumbai Refinery.

You are invited to quote online through BPCL E-Procurement websitehttps://bpcleproc.in "On-Two-Bid-Basis" for the subject work as per theenclosed Tender Documents.

Submission of tenders on line:

Bidders are requested to submit / upload their UNPRICED & PRICED BIDS alongwith all required documents, on or before the due date and time, on BPCLE-Procurement website https://bpcleproc.in . In case nothing is mentionedregarding acceptance of the documents in separate attachment titled'DEVIATIONS', it will be assumed that all tender documents are acceptable tothe bidders. In case of any discrepency between SOR details in RFQ documentand SOR document of E-tender, the details in RFQ document shall prevail.

For any assistance regarding online submission of bids on BPCL E-Procurementweb site, bidders may contact helpdesk of M/s. E-Procurement Technologies Ltd.(ETL) on Telephone nos. +91 79 4001 6868 between 10.00 hrs to 19.00 hrs. or+91 22 2554 0717 or 9920038902 between 09.00 hrs to 17.00 hrs.

Attachement : Engineers India Limited Tender doucment______________________________________________________________________________________________________________________________________________Subject: BALANCE CIVIL / STRUCTURAL, MECHANICAL, PIPING, INSULATION & PAINTING

WORKS FOR Kind Attn: Please quote your lowest prices for the supply of materials/services as perdetails given below. The quotation shall show separately and clearly (withoutany corrections) the basic price, discount (%), packing & forwarding (%),excise duty (with relevant excise tariff no./chapter id), sales tax (VAT/CST),freight(%),Service tax,other charges, etc against each item separately, asapplicable.Foreign vendors shall always quote their FOB prices against each item.Rates/charges quoted in the quotation shall be final and no additionalcharges/corrections will be accepted after the receipt of quotation unless the

To,M/s. BPCL ESTIMATEMUMBAI . India - 400038.Ph:,Fax:.Vendor Code:300648

Quotation Due Date/Time:15.12.2015/14:00:00

For Bharat Petroleum Corporation Ltd.Vendor Sign & Stamp

REQUEST FOR QUOTATION Collective RFQ Number/ Purchase Group 1000245132 / N47-TGTU SER PROC Contact person/Telephone HARNE H M/022- Fax : - Email:[email protected] Our ref.:

RFQ No/Date: 6000887598 / 19.11.2015

Page 1 of 470

same is necessitated by BPCL in writing.

The quotation shall be put in a sealed envelope superscribed as "QUOTATION FORBPCL COL.No.1000245132 and sent to us before due date & time.

_______________________________________________________________________ Item Material Qty Unit Unit Basic Rate

Description Delivery date (in Figures)_______________________________________________________________________00010 Fab. of piping specials from Pipes 01.03.2016_______________________________________________________________________ The item 00010 covers the following services:_______________________________________________________________________ 10 3 NO

C.S. ECC. RED. THK <=10MM NB 18 IN (Number) _________________________________________________________________

FABRICATION OF PIPING SPECIALS FROM PIPES (SUPPLIED BY OWNER) :-Scope includes followings (as per EIL SOR A710-000-55-43-PK-SOR-3010-0)Fabrication of the following specials from pipes of all types & thicknessesincluding transportation of materials from Owner's storage points to worksite/workshop, cutting, fitup, edge preparing, welding, bending, testing(Including DP/MP) & inspection as per specs etc. supply of all necessaryequipment, consumables, labour, supervision etc. The work shall be carried outas per the specificatons, drawings and instructions ofEngineer-in-Charge.Note: Sizes mentioned under the heading of Reducers (Conc./ Ecc.) are for large end

Size: C.S ECC. REDUCERS; THK. <= 10MM NB 18.00 Inches _________________________________________________________________

Service Item 10: Unit basic rate in words ________________________________

______________________________________________________________________________________________________________________________________________ 20 3 NO

C.S. ECC. RED. THK <=10MM NB 24 IN (Number) _________________________________________________________________

FABRICATION OF PIPING SPECIALS FROM PIPES (SUPPLIED BY OWNER) :-Scope includes followings (as per EIL SOR A710-000-55-43-PK-SOR-3010-0)Fabrication of the following specials from pipes of all types & thicknessesincluding transportation of materials from Owner's storage points to worksite/workshop, cutting, fitup, edge preparing, welding, bending, testing(Including DP/MP) & inspection as per specs etc. supply of all necessaryequipment, consumables, labour, supervision etc. The work shall be carried outas per the specificatons, drawings and instructions ofEngineer-in-Charge.Note: Sizes mentioned under the heading of Reducers (Conc./ Ecc.) are for large end

Size: C.S ECC. REDUCERS; THK. <= 10MM NB 24.00 Inches _________________________________________________________________


RFQ Number :6000887598 Date : 19.11.2015To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 2 of 470

Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________

_______________________________________________________________________Service Tax%____________ VAT%________________ CST%________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________00020 PIPING (ABOVE GOUND) NON IBR CS 01.03.2016_______________________________________________________________________ The item 00020 covers the following services:_______________________________________________________________________ 10 465 IND

Fab:UPTO 1.5IN (Butt weld) THK<=10MM (Inch Diameter) _________________________________________________________________

Piping above ground:

Scope includes the following: (As per EIL SOR A710-000-55-43-PK-SOR-3010-0)

PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.

SPECIAL INSTRUCTIONS TO THE CONTRACTOR:In addition to the scope of work indicated at Item NoM10900000000, PIPING (ABOVE GROUND), Contractorto note that bare pipes of all sizes shall be supported withcorrosion pad or pad and shoe on pipe rack/ sleepers.The rates at Item No M10900000000 shall be inclusive ofthe above activity.Pad shall be as per BPCL standardDwg. No. 29890.




Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: Butt weldSize: NB UPTO 1.5 Inch _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 11,605 IND

Fab:2IN - 6IN (Butt weld) THK<=10MM (Inch Diameter) _________________________________________________________________




SPECIAL INSTRUCTIONS TO THE CONTRACTOR:In addition to the scope of work indicated at Item NoM10900000000, PIPING (ABOVE GROUND), Contractorto note that bare pipes of all sizes shall be supported with



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________corrosion pad or pad and shoe on pipe rack/ sleepers.The rates at Item No M10900000000 shall be inclusive ofthe above activity.Pad shall be as per BPCL standardDwg. No. 29890.

Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: Butt weldSize: NB 2 Inch to 6 Inch _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 5,245 IND

Fab:8 IN - 14IN (Butt weld) THK<=10MM (Inch Diameter) _________________________________________________________________






Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SPECIAL INSTRUCTIONS TO THE CONTRACTOR:In addition to the scope of work indicated at Item NoM10900000000, PIPING (ABOVE GROUND), Contractorto note that bare pipes of all sizes shall be supported withcorrosion pad or pad and shoe on pipe rack/ sleepers.The rates at Item No M10900000000 shall be inclusive ofthe above activity.Pad shall be as per BPCL standardDwg. No. 29890.

Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: Butt weldSize: NB 8 Inch to 14 Inch _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 4,070 IND

Fab:16 IN - 42 IN (Butt weld) THK<=10MM (Inch Diameter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMI



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________spec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: Butt weldSize: NB 16 inch to 24 Inch _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 6,070 IND

Fab:UPTO 1.5IN (Fillet weld) THK<=10MM (Inch Diameter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing Positive



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Material Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: FILLET WELDSize: NB UPTO 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 345 IND

Fab: 2 IN to 6 IN(Fillet weld) THK<=10MM (Inch Diameter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip as



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________per EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMFabrication: FILLET WELDSize: NB 2 INCH TO 6 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 3,565 INM

Erection: NB upto 1.5 IN THK<=10MM (Inch Meter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque wherever



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________required & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMWORK: ERECTIONSize: NB UPTO 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 11,355 INM

Erection: NB 2 INCH - 6 INCH THK<=10MM (Inch Meter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead on



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________racks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (Non IBR) , THK. <= 10MMWORK: ERECTIONSize: NB 2 INCH TO 6 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 5,595 INM

Erection: NB 8 INCH - 14INCH THK<=10MM (Inch Meter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edge



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________preparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 7,545 INM

Erection: 16 INCH - 42 INCH THK<=10MM (Inch Meter) _________________________________________________________________




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Scope includes the following: (As per EIL SOR A710-000-55-43-PK-SOR-3010-0)





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 2,675 IND



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________FAB:2IN - 6IN (BUTTWELD) THK 10MM - 20MM (Inch Diameter)

_________________________________________________________________Piping above ground:




Material Spec:Carbon Steel Piping (Non IBR) , THK. > 10 MM AND <=20 MMWORK: FABRICATION : BUTT WELDSize: NB 2 INCH TO 6 INCH _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 85 IND

FAB:8IN-14IN(BUTTWELD) THK 10MM-20MM (Inch Diameter) _________________________________________________________________







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Material Spec:Carbon Steel Piping (Non IBR) , THK. > 10MM AND <=20MMWORK: FABRICATION : BUTT WELDSize: NB 8 INCH TO 14 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 105 IND





SPECIAL INSTRUCTIONS TO THE CONTRACTOR:In addition to the scope of work indicated at Item NoM10900000000, PIPING (ABOVE GROUND), Contractorto note that bare pipes of all sizes shall be supported withcorrosion pad or pad and shoe on pipe rack/ sleepers.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________The rates at Item No M10900000000 shall be inclusive ofthe above activity.Pad shall be as per BPCL standardDwg. No. 29890.

Material Spec:Carbon Steel Piping (Non IBR) , THK. > 10MM AND <=20MMWORK: FABRICATION : BUTT WELDSize: NB 16 INCH TO 24 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 1,190 IND








Material Spec:Carbon Steel Piping (Non IBR) , THK. > 10MM AND <=20MMWORK: FABRICATION : BUTT WELDSize: NB 26 INCH TO 36 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 2,625 INM

ERECTION: 2IN-6IN THK 10MM-20MM (Inch Meter) _________________________________________________________________








Material Spec:Carbon Steel Piping (Non IBR) , THK. > 10MM AND <=20MMWORK: ERECTIONSize: NB 2 INCH TO 6 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 20 INM

ERECTION: 8IN-14IN THK 10MM-20MM (Inch Meter) _________________________________________________________________










_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 1,795 INM

ERECTION: 26IN-36INTHK 10MM-20MM (Inch Meter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip as



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________per EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.





_____________________________________________________________________________________________________________________________________________________________________________________________________________________00030 PIPING (ABOVE GROUND) IBR CS 01.03.2016_______________________________________________________________________ The item 00030 covers the following services:_______________________________________________________________________ 10 70 IND




PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: FABRICATION: BUTT WELDSize: NB UPTO 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1,490 IND

Fab:2IN - 6IN (Butt weld) THK<=10MM (Inch Diameter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner's



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________storage point to work site/work shop; fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.


Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: FABRICATION: BUTT WELDSize: NB 2 INCH TO 6 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1,380 IND









Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: FABRICATION: FILLET WELDSize: NB UPTO 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




40 1,025 INM Erection: NB upto 1.5 IN THK<=10MM (Inch Meter)

_________________________________________________________________Piping above ground:




Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: ERECTIONSize: NB UPTO 1.5 INCH _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 1,420 INM

Erection: NB 2 INCH - 6 INCH THK<=10MM (Inch Meter) _________________________________________________________________







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: ERECTIONSize: NB 2 INCH TO 6 INCH _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00040 PIPING (ABOVE GROUND) NON IBR SS 01.03.2016_______________________________________________________________________ The item 00040 covers the following services:_______________________________________________________________________ 10 20 IND








Material Spec:STAINLESS STEEL PIPING (NON IBR) THK. <= 10 MMWORK: FABRICATION : BUTT WELDSize: NB UPTP 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 230 IND









Material Spec:STAINLESS STEEL PIPING (NON IBR) THK. <= 10 MMWORK: FABRICATION : FILLET WELDSize: NB UPTP 1.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 255 INM

Erection: NB upto 1.5 IN THK<=10MM (Inch Meter) _________________________________________________________________








Material Spec:STAINLESS STEEL PIPING (NON IBR) THK. <= 10 MMWORK: ERECTIONSize: NB UPTP 1.5 INCH _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00050 Erection:Flanged/Wafer Valve (UPTO 600#) 01.03.2016_______________________________________________________________________ The item 00050 covers the following services:_______________________________________________________________________ 10 16 NO

NB 0.5 INCHES (Number) _________________________________________________________________

Erection of FLANGED/WAFER VALVES (UPTO 600#):

Scope of work (As per EIL SOR A710-000-55-43-PK-SOR-3010-0)VALVES :- Transportation of all types of valves (Including special & motoroperated valves) from Owner's storage points to contractor's stores/worksiteand installation of valves for all rating including assembly of valvesaccessories, if any, fixing of gaskets bolts/nuts wherever required andperforming Positive Material Identification(PMI) using alloy analysers as perspecification, drawings and directions of Engineer-in- Charge.

VALVE TYPE: FLANGED/WAFER VALVES (UPTO 600#)SIZE: NB 0.5 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 8 NO

NB 1.0 INCH (Number) _________________________________________________________________



VALVE TYPE: FLANGED/WAFER VALVES (UPTO 600#)SIZE: NB 1.0 INCHE _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 334 NO

NB 2.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 143 NO

NB 3.0 INCHES (Number)




_________________________________________________________________Erection of FLANGED/WAFER VALVES (UPTO 600#):




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 79 NO

NB 4.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 72 NO

NB 6.0 INCHES (Number) _________________________________________________________________


Scope of work (As per EIL SOR A710-000-55-43-PK-SOR-3010-0)VALVES :- Transportation of all types of valves (Including special & motoroperated valves) from Owner's storage points to contractor's stores/worksiteand installation of valves for all rating including assembly of valves



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________accessories, if any, fixing of gaskets bolts/nuts wherever required andperforming Positive Material Identification(PMI) using alloy analysers as perspecification, drawings and directions of Engineer-in- Charge.



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 31 NO

NB 8.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 21 NO

NB 10.0 INCHES (Number) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 25 NO

NB 12.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 13 NO

NB 14.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 8 PC

NB 16.0 INCHES (Piece)




_________________________________________________________________Erection of FLANGED/WAFER VALVES (UPTO 600#):




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 4 PC

NB 20.0 INCHES (Piece) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 4 PC

NB 24.0 INCHES (Piece) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 1 PC

NB 28.0 INCHES (Piece) _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00060 Erection: Control Valves (Upto 600#) 01.03.2016_______________________________________________________________________ The item 00060 covers the following services:_______________________________________________________________________ 10 17 NO

NB 1.0 INCH (Number) _________________________________________________________________

Erection of Control VALVES (UPTO 600#):

Scope of work (As per EIL SOR A710-000-55-43-PK-SOR-3010-0)VALVES :- Transportation of all types of valves (Including special & motoroperated valves) from Owner's storage points to contractor's stores/worksiteand installation of valves for all rating including assembly of valvesaccessories, if any, fixing of gaskets bolts/nuts wherever required andperforming Positive Material Identification(PMI) using alloy analysers as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specification, drawings and directions of Engineer-in- Charge.

VALVE TYPE: Control VALVES (UPTO 600#)SIZE: NB 1.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1 NO

NB 1.5 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 5 NO

NB 2.0 INCHES (Number) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 4 NO

NB 3.0 INCHES (Number) _________________________________________________________________



VALVE TYPE: Control VALVES (UPTO 600#)SIZE: NB 3.0 inches _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 3 NO

NB 4.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 3 NO





_________________________________________________________________Erection of Control VALVES (UPTO 600#):




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 4 NO

NB 8.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 3 NO

NB 10.0 INCHES (Number) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 5 NO

NB 14.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 5 NO

NB 16.0 INCHES (Number) _________________________________________________________________









_____________________________________________________________________________________________________________________________________________________________________________________________________________________00070 BOLT TENSIONING ITEM NO. M12000000000 01.03.2016_______________________________________________________________________ The item 00070 covers the following services:_______________________________________________________________________ 10 10 NO

NB 12 INCH (150 # JOINTS) (Number) _________________________________________________________________

BOLT TENSIONING:

SCOPE OF WORK: (AS PER EIL MR A710-000-55-43-PK-SOR-3010-0)

BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erectedsystem including supply of all materials, recording devices, instruments etc;Providing all normal and special equipment and gadgets, skilled / un skilledlabour,specialist, supervisory staff and completing the work in all respectsas per specifications and instructions of engineer-in-charge. some joints mayrequire bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 150#

SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 117 NO


BOLT TENSIONING:


BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erectedsystem including supply of all materials, recording devices, instruments etc;Providing all normal and special equipment and gadgets, skilled / un skilledlabour,specialist, supervisory staff and completing the work in all respectsas per specifications and instructions of engineer-in-charge. some joints may



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________require bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 150#

SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 46 NO


BOLT TENSIONING:



TYPE OF JOINT: 150#

SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 8 NO


BOLT TENSIONING:


BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erectedsystem including supply of all materials, recording devices, instruments etc;Providing all normal and special equipment and gadgets, skilled / un skilledlabour,specialist, supervisory staff and completing the work in all respects



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________as per specifications and instructions of engineer-in-charge. some joints mayrequire bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 150#

SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 29 NO


BOLT TENSIONING:



TYPE OF JOINT: 150#

SIZE: NB 20.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 25 NO


BOLT TENSIONING:


BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erectedsystem including supply of all materials, recording devices, instruments etc;Providing all normal and special equipment and gadgets, skilled / un skilled



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________labour,specialist, supervisory staff and completing the work in all respectsas per specifications and instructions of engineer-in-charge. some joints mayrequire bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 150#

SIZE: NB 24.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 3 NO


BOLT TENSIONING:



TYPE OF JOINT: 150#

SIZE: NB 28.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 5 NO

NB 10.0 INCHES (300 # JOINTS) (Number) _________________________________________________________________

BOLT TENSIONING:


BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erectedsystem including supply of all materials, recording devices, instruments etc;



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Providing all normal and special equipment and gadgets, skilled / un skilledlabour,specialist, supervisory staff and completing the work in all respectsas per specifications and instructions of engineer-in-charge. some joints mayrequire bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 300#

SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 10 NO


BOLT TENSIONING:



TYPE OF JOINT: 300#

SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 10 NO


BOLT TENSIONING:


BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types ofpiping as called for in EIL Specification No.6-76-0002 on already erected



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________system including supply of all materials, recording devices, instruments etc;Providing all normal and special equipment and gadgets, skilled / un skilledlabour,specialist, supervisory staff and completing the work in all respectsas per specifications and instructions of engineer-in-charge. some joints mayrequire bolt tensioning more than once, but, payment for one joint shall bemade only once.

TYPE OF JOINT: 300#

SIZE: NB 16.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00080 C.S REINFORCING PADS FOR PIPES 01.03.2016_______________________________________________________________________ The item 00080 covers the following services:_______________________________________________________________________ 10 9 NO

NB 2.0 INCHES (Number) _________________________________________________________________

REINFORCING PADS FOR PIPES

Scope of Work: (As per EIL SOR A710-000-55-43-pk-sor-3010-0) itemno.M12100000000 Fabrication of reinforcing pads for pipe connection wherever required (frompipes only supplied by the Owner) and erection, fitup, welding & testing(including DP/MP) if required of the same and performing Positive MaterialIdentification(PMI) using alloy analysers as per the specifications, drawingsand instructions of the Engineerin-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe

Type: C.S REINFORCING PADSSize: NB 2.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 4 NO

NB 3.0 INCHES (Number) _________________________________________________________________


Scope of Work: (As per EIL SOR A710-000-55-43-pk-sor-3010-0) item



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________no.M12100000000 Fabrication of reinforcing pads for pipe connection wherever required (frompipes only supplied by the Owner) and erection, fitup, welding & testing(including DP/MP) if required of the same and performing Positive MaterialIdentification(PMI) using alloy analysers as per the specifications, drawingsand instructions of the Engineerin-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 5 NO

NB 4.0 INCHES (Number) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 3 NO

NB 6.0 INCHES (Number) _________________________________________________________________


Scope of Work: (As per EIL SOR A710-000-55-43-pk-sor-3010-0) itemno.M12100000000 Fabrication of reinforcing pads for pipe connection wherever required (frompipes only supplied by the Owner) and erection, fitup, welding & testing(including DP/MP) if required of the same and performing Positive MaterialIdentification(PMI) using alloy analysers as per the specifications, drawings



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and instructions of the Engineerin-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 1 NO

NB 16.0 INCHES (Number) _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00090 RADIOGRAPHY ITEM NO. M12201000000 01.03.2016_______________________________________________________________________ The item 00090 covers the following services:_______________________________________________________________________ 10 14 NO

NB 0.5 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:

Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:M12201000000)

:- Performance of radiographic inspection on piping of all types &thicknesses including providing or hiring of all necessary equipment and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________whatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and foradditional radiography necessitated due to poor performance of contractor'swelders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.

Type:FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF SPEC 6-44-16)Size: NB 0.5 inches _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 82 NO

NB 0.75 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:


:- Performance of radiographic inspection on piping of all types &thicknesses including providing or hiring of all necessary equipment andwhatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and foradditional radiography necessitated due to poor performance of contractor'swelders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 16 NO

NB 0.1 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:

Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________M12201000000)




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 60 NO

NB 1.5 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 360 NO



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________NB 2.0 INCHES (Number)

_________________________________________________________________RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 150 NO

NB 3.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 103 NO

NB 4.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 98 NO

NB 6.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:


:- Performance of radiographic inspection on piping of all types &thicknesses including providing or hiring of all necessary equipment andwhatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and foradditional radiography necessitated due to poor performance of contractor's



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________welders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.





NB 4.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:



TYPE: FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lVOF SPEC 6-44-16/AS/SS)Size: NB 4.00 inches _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 4 NO

NB 6.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:M12202000000)


TYPE: FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lVOF SPEC 6-44-16/AS/SS)Size: NB 6.00 inches _________________________________________________________________




NB 2.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:



Type:FOR JOINTS ABOVE THK. 8MM



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Size: NB 2.0 inches _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 16 NO

NB 4.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:



Type:FOR JOINTS ABOVE THK. 8MMSize: NB 4.0 inches _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 94 NO

NB 6.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:


:- Performance of radiographic inspection on piping of all types &thicknesses including providing or hiring of all necessary equipment andwhatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________additional radiography necessitated due to poor performance of contractor'swelders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 43 NO

NB 8.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 14 NO

NB 10.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:


:- Performance of radiographic inspection on piping of all types &



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________thicknesses including providing or hiring of all necessary equipment andwhatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and foradditional radiography necessitated due to poor performance of contractor'swelders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.

Type:FOR JOINTS ABOVE THK. 8MMSize: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 36 NO

NB 12.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 22 NO

NB 14.0 INHCES (Number) _________________________________________________________________

RADIOGRAPHY:







_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 29 NO

NB 16.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________




90 7 NO NB 18.0 INCHES (Number)

_________________________________________________________________RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 17 NO

NB 20.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 10 NO

NB 24.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 9 NO

NB 28.0 INCHES (Number) _________________________________________________________________

RADIOGRAPHY:


:- Performance of radiographic inspection on piping of all types &thicknesses including providing or hiring of all necessary equipment andwhatever else even though not expressly mentioned but required to perform thework as per specifications and instructions of Engineer-in-Charge. Radiographsshall be submitted to the Engineer-in-charge. (Repeat Radiography due todefective radiograph on repaired joints due to Contractor's fault and foradditional radiography necessitated due to poor performance of contractor's



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________welders shall be done at contractor's cost)Note: Unit for radiography quantity is 'Nos of circumferencial weld joints'.




_____________________________________________________________________________________________________________________________________________________________________________________________________________________00120 DYE PENETRATION/MAGNETIC PARTICLE TEST 01.03.2016_______________________________________________________________________ The item 00120 covers the following services:_______________________________________________________________________ 10 2,035 "

DYE PENETRATION TEST (Inch) _________________________________________________________________

DYE PENETRANT TESTScope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:M12301000000)

Performance of dye penetrant testincluding supply of all necessary materials, equipmentand labour for carrying out the work as per specificationand directions of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 19,357 "

MAGNETIC PARTICLE TEST (Inch) _________________________________________________________________

MAGNETIC PARTICLE TESTScope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:M12302000000)

Performance of magnetic particle including supply of all necessary materials,equipment and labour for carrying out the work as per specification anddirections of Engineer-in-Charge. _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00130 PIPE SUPPORTS (OWNER SUPPLY) 01.03.2016_______________________________________________________________________ The item 00130 covers the following services:_______________________________________________________________________ 10 3.000 MT

DUMMY PIPE SUPPORTS FOR C.S (Tonnes) _________________________________________________________________

PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY OWNER) :-


DUMMY PIPE SUPPORTS FOR C.S (OWNER SUPPLIED)Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method usingdie), turn buckles, saddles, guides, special supports, pads(includingcorrosion pads & protection shields), providing and welding of stiffeners asper drawings, T post etc. of all types including supply and application onecoat of primer, all necessary equipments, consumables, labour, returningsurplus materials and scrap etc to owner's storage points and completing workas per drawings, specifications and instructions of Engineer-in-charge.Modifications/rectifications, if required; and adjustment/ alignment duringprecommisioning, commisioning as per the instructions of Engineer-in-charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 0.490 MT

DUMMY PIPE SUPPORTS FOR S.S (Tonnes) _________________________________________________________________

PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY OWNER) :-


DUMMY PIPE SUPPORTS FOR S.S (OWNERSUPPLIED)

Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method usingdie), turn buckles, saddles, guides, special supports, pads(includingcorrosion pads & protection shields), providing and welding of stiffeners asper drawings, T post etc. of all types including supply and application one



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________coat of primer, all necessary equipments, consumables, labour, returningsurplus materials and scrap etc to owner's storage points and completing workas per drawings, specifications and instructions of Engineer-in-charge.Modifications/rectifications, if required; and adjustment/ alignment duringprecommisioning, commisioning as per the instructions of Engineer-in-charge.

_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00140 PIPE SUPPORTS (CONTRACTOR SUPPLY) 01.03.2016_______________________________________________________________________ The item 00140 covers the following services:_______________________________________________________________________ 10 2.000 MT

C.S STRUCTURAL STEEL (CONTRACTOR SUPPLIE (Tonnes) _________________________________________________________________

PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) :-


C.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED)Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method usingdie), turn buckles, saddles, guides, special supports, pads(includingcorrosion pads & protection shields), providing and welding of stiffeners asper drawings, T post etc. of all types including supply and application onecoat of primer, all necessary equipments, consumables, labour, and completingwork as per drawings, specifications and instructions of Engineer-incharge.Modifications/rectifications, if required; and adjustment/ alignment duringprecommisioning, commisioning as per the instructions of Engineer-incharge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 0.490 MT

S.S STRUCTURAL STEEL (CONTRACTOR SUPPLIE (Tonnes) _________________________________________________________________

PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) :-




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________S.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED)Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method usingdie), turn buckles, saddles, guides, special supports, pads(includingcorrosion pads & protection shields), providing and welding of stiffeners asper drawings, T post etc. of all types including supply and application onecoat of primer, all necessary equipments, consumables, labour, and completingwork as per drawings, specifications and instructions of Engineer-incharge.Modifications/rectifications, if required; and adjustment/ alignment duringprecommisioning, commisioning as per the instructions of Engineer-incharge. _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00150 HARDNESS TEST 01.03.2016_______________________________________________________________________ The item 00150 covers the following services:_______________________________________________________________________ 10 61 NO

NB 0.5 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-


Carrying out hardness testing of weld joints on all types of piping as calledfor on shop / site fabricated already erected system including supply of allmaterials, instrument set., providing all normal & special equipment andgadgets, skilled / unskilled labour, specialist, supervisory staff andcompleting the work in all respects as per specifications and instructions ofengineer-in-charge. The joints under this head do not include Stress Relievedjoints. Joints which do not meet the hardness requirement as per spec shall bestress relieved and re tested on contractor's cost. No seperate payment shallbe made for this. NOTE : Unit for hardness testing quantity is 'Nos ofcircumferencial weld joints'.

SIZE: NB 0.5 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 212 NO





_________________________________________________________________HARDNESS TEST :-



SIZE: NB 0.75 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 33 NO

NB 1.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 1.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 100 NO

NB 1.5 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 1.50 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 1,760 NO

NB 2.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 2.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 724 NO

NB 3.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 533 NO

NB 4.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-


Carrying out hardness testing of weld joints on all types of piping as calledfor on shop / site fabricated already erected system including supply of allmaterials, instrument set., providing all normal & special equipment andgadgets, skilled / unskilled labour, specialist, supervisory staff andcompleting the work in all respects as per specifications and instructions ofengineer-in-charge. The joints under this head do not include Stress Relievedjoints. Joints which do not meet the hardness requirement as per spec shall bestress relieved and re tested on contractor's cost. No seperate payment shallbe made for this. NOTE : Unit for hardness testing quantity is 'Nos of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________circumferencial weld joints'.

SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 906 NO

NB 6.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 190 NO

NB 8.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-


Carrying out hardness testing of weld joints on all types of piping as calledfor on shop / site fabricated already erected system including supply of allmaterials, instrument set., providing all normal & special equipment andgadgets, skilled / unskilled labour, specialist, supervisory staff andcompleting the work in all respects as per specifications and instructions ofengineer-in-charge. The joints under this head do not include Stress Relieved



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________joints. Joints which do not meet the hardness requirement as per spec shall bestress relieved and re tested on contractor's cost. No seperate payment shallbe made for this. NOTE : Unit for hardness testing quantity is 'Nos ofcircumferencial weld joints'.

SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 68 NO

NB 10.0 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 182 NO

NB 12.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-


Carrying out hardness testing of weld joints on all types of piping as calledfor on shop / site fabricated already erected system including supply of allmaterials, instrument set., providing all normal & special equipment and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________gadgets, skilled / unskilled labour, specialist, supervisory staff andcompleting the work in all respects as per specifications and instructions ofengineer-in-charge. The joints under this head do not include Stress Relievedjoints. Joints which do not meet the hardness requirement as per spec shall bestress relieved and re tested on contractor's cost. No seperate payment shallbe made for this. NOTE : Unit for hardness testing quantity is 'Nos ofcircumferencial weld joints'.

SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 85 NO

NB 14.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 116 NO

NB 16.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Carrying out hardness testing of weld joints on all types of piping as calledfor on shop / site fabricated already erected system including supply of allmaterials, instrument set., providing all normal & special equipment andgadgets, skilled / unskilled labour, specialist, supervisory staff andcompleting the work in all respects as per specifications and instructions ofengineer-in-charge. The joints under this head do not include Stress Relievedjoints. Joints which do not meet the hardness requirement as per spec shall bestress relieved and re tested on contractor's cost. No seperate payment shallbe made for this. NOTE : Unit for hardness testing quantity is 'Nos ofcircumferencial weld joints'.

SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 29 NO

NB 18.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 77 NO

NB 20.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-





SIZE: NB 20.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 39 NO

NB 24.000 INCHES (Number) _________________________________________________________________

HARDNESS TEST :-



SIZE: NB 24.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 46 NO





_________________________________________________________________HARDNESS TEST :-



SIZE: NB 28.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00160 STRESS RELEIVING 01.03.2016_______________________________________________________________________ The item 00160 covers the following services:_______________________________________________________________________ 10 922 NO

NB 0.500 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separate



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________payment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'

SIZE: NB 0.5 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1,681 NO

NB 0.750 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'

SIZE: NB 0.75 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 174 NO

NB 1.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), as



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________applicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'

SIZE: NB 1.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 450 NO

NB 1.500 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-



SIZE: NB 1.50 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 1,759 NO



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________NB 2.000 INCHES (Number)

_________________________________________________________________STRESS RELIEVING :-



SIZE: NB 2.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 724 NO

NB 3.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________'Nos of circumferential weld joints'

SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 533 NO

NB 4.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-



SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 906 NO

NB 6.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricated



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________already erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'

SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 190 NO

NB 8.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-



SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 68 NO





_________________________________________________________________STRESS RELIEVING :-



SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 182 NO

NB 12.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-






SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 85 NO

NB 14.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-



SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 116 NO

NB 16.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumables



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________recording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'

SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 29 NO

NB 18.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-



SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 77 NO

NB 20.000 INCHES (Number) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________STRESS RELIEVING :-



SIZE: NB 20.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 39 NO

NB 24.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SIZE: NB 24.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 46 NO

NB 28.000 INCHES (Number) _________________________________________________________________

STRESS RELIEVING :-


Carrying out stress relieving of weld joints, including all types ofattachment welds (corrosion pads, protection shields, supports, etc.), asapplicable, on all types of piping as called for on shop/site fabricatedalready erected system including supply of all materials, consumablesrecording devices, insulation materials, instruments etc., providing allnormal & special equipment and gadgets, skilled/unskilled labour, specialist,supervisory staff and completing the work in all respects as perspecifications and instructions of Engineer-in-Charge. Repeat performance dueto defective stress relieving or any other account shall be on Contractor'scost. Payment shall be done only after submission and approval of charts.Stress relieving shall be followed by measurement of hardness and no separatepayment shall be made for this. Note: Unit for stress relieving quantity is'Nos of circumferential weld joints'joints'

SIZE: NB 28.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00170 MODIFICATION WORKS 01.03.2016_______________________________________________________________________ The item 00170 covers the following services:_______________________________________________________________________ 10 400 IND

FLAME CUTTING C.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________

MODIFICATION/EXTRA WORKS (IF ANY) :-





FLAME CUTTING C.S PIPING IBR/NON IBR:

Cutting,bevelling, fitup, welding of different sizes of CS(IBR / NON IBR) /AS/SSpiping of all types and thicknessess in shop, in position, on ground/overheadon rack and at all elevations; transportation of pipes, fittings, flanges etcfrom owner's storage point to work site/ work shop, making necessaryscaffoldings, consumables, machinery, tools, tackles, labour and supervisionincluding attending repairs for completing the work as per the instruction ofEngineer-in-charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 400 IND

HACKSAW CUTTING C.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________



HACKSAW CUTTING C.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 400 IND

BEVELLING C.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________


Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item No:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________M13700000000)

BEVELLING C.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 400 IND

FITUP & WELDING C.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________



FITUP & WELDING C.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 70 IND

FLAME CUTTING S.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________





FLAME CUTTING S.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 120 IND

HACKSAW CUTTING S.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________



HACKSAW CUTTING S.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 120 IND

BEVELLING S.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________






BEVELLING S.S PIPING IBR/NON IBR:


_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 120 IND

FITUP & WELDING S.S PIPING IBR/NON IBR (Inch Diameter) _________________________________________________________________



FITUP & WELDING S.S PIPING IBR/NON IBR:


_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________




00180 SAFETY VALVE ERECTION AND CALIBRATION 01.03.2016_______________________________________________________________________ The item 00180 covers the following services:_______________________________________________________________________ 10 7 NO

SIZES UP TO 0.75" X 1" THREDED (Number) _________________________________________________________________

SAFETY VALVE ERECTION/ CALIBRATION :-



SIZES UP TO 0.75" X 1" THREDED

Transportation of all types of safety valves, pilot operated safety valvesfrom owner's storage point to contractor's store/worksite and installation ofvalves for all ratings including assembly of valves, accessories if any, atall locations and fixing of gaskets, bolts/nuts wherever required as perdrawings, specifications and as per the directions of engineer-in-charge.Cleaning, set pressure tests of pressure relief and thermal relief valvesbefore installation, providing equipments, necessary test jig, instrument air,nitrogen cylinders, all consumables and loop testing includingdropping/shifting of the PSV's/TSV's from the installed position(if required)to workshop for calibration/re-calibration/re-checking, etc., and reinstallback to original location including parts replacement, gasket, stud/boltsetc., re-fixing of the PSV's /TSV's including lapping (if required) butexcludes flow calibration, calibration/test reports and excluding supply ofvalves( Note: size mentioned below are safety valves inlet size).

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 29 NO

INLET SIZES UPTO 2" FLANGED, 150#-600# (Number) _________________________________________________________________



INLET SIZES UPTO 2" FLANGED, RATING 150# TO600#

Transportation of all types of safety valves, pilot operated safety valvesfrom owner's storage point to contractor's store/worksite and installation of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________valves for all ratings including assembly of valves, accessories if any, atall locations and fixing of gaskets, bolts/nuts wherever required as perdrawings, specifications and as per the directions of engineer-in-charge.Cleaning, set pressure tests of pressure relief and thermal relief valvesbefore installation, providing equipments, necessary test jig, instrument air,nitrogen cylinders, all consumables and loop testing includingdropping/shifting of the PSV's/TSV's from the installed position(if required)to workshop for calibration/re-calibration/re-checking, etc., and reinstallback to original location including parts replacement, gasket, stud/boltsetc., re-fixing of the PSV's /TSV's including lapping (if required) butexcludes flow calibration, calibration/test reports and excluding supply ofvalves( Note: size mentioned below are safety valves inlet size).

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1 NO

INLET SIZES 2.5" to 4" 150#TO 600# (Number) _________________________________________________________________



INLET SIZES 2.5" to 4" 150#TO 600#

Transportation of all types of safety valves, pilot operated safety valvesfrom owner's storage point to contractor's store/worksite and installation ofvalves for all ratings including assembly of valves, accessories if any, atall locations and fixing of gaskets, bolts/nuts wherever required as perdrawings, specifications and as per the directions of engineer-in-charge.Cleaning, set pressure tests of pressure relief and thermal relief valvesbefore installation, providing equipments, necessary test jig, instrument air,nitrogen cylinders, all consumables and loop testing includingdropping/shifting of the PSV's/TSV's from the installed position(if required)to workshop for calibration/re-calibration/re-checking, etc., and reinstallback to original location including parts replacement, gasket, stud/boltsetc., re-fixing of the PSV's /TSV's including lapping (if required) butexcludes flow calibration, calibration/test reports and excluding supply ofvalves( Note: size mentioned below are safety valves inlet size).

_________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00190 CARBON STEEL GALVANIGING 01.03.2016_______________________________________________________________________ The item 00190 covers the following services:_______________________________________________________________________ 10 35 M

NB 1.000 INCHES (Meter) _________________________________________________________________




Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: CARBON STEEL PIPE GALVANIZINGSize: NB 1.0 INCH _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 75 M

NB 2.000 INCHES (Meter) _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 145 M

NB 3.000 INCHES (Meter) _________________________________________________________________










_____________________________________________________________________________________________________________________________________________________________________________________________________________________00200 STEAM TRACERS CARBON STEEL 01.03.2016_______________________________________________________________________ The item 00200 covers the following services:_______________________________________________________________________ 10 5,675 M

NB 0.500 INCHES (Meter) _________________________________________________________________







Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: STEAM TRACERS CARBON STEELSize: NB 0.5 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1,105 M

NB 0.750 INCHES (Meter) _________________________________________________________________



PIPING (ABOVE GROUND) :-Transportation of all piping items from Owner'sstorage point to work site/work shop; fabrication including cutting, edge



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________preparation, (inclusive of grinding the edges of pipe, fittings, flanges etc.to match with the mating edges of uneven/different thickness whereverrequired); fitup, bending, preheating wherever required, welding, threading,and laying of pipes of all types and thickness over sleepers, overhead onracks and at all elevations, connecting with equipment nozzles, strainers,steam traps, orifice assemblies, spray nozzles, rotameters, tappings forpressure gauges, thermowells, sample connections, springs, sample coolers etc.and fixing of gaskets, bolts, nuts including application of torque whereverrequired & all other inline instruments and fittings, like elbows, reducers,tees, piping specials such as mitres and fabricated fittings, vents, drains(but excluding reinforcing pads), SW valves upto 1.5 NB, Steam Supply/Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip asper EIL Std 7-51-0112 to all pipes before hydro-testing at exit points ofUnits for earthing purpose; alignment, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified draining, drying by compressed air, performing PositiveMaterial Identification(PMI) using alloy analysers, completing all such worksin all respects (including preparation of isometrics as mentioned in the Scopeof Work for the job) as per the specifications, drawings and instructions ofEngineer-in-Charge. PMI shall be performed by third party as defined in PMIspec.Rates for tubing (if any) shall include rates for valves, fittings, allin line instruments and testing etc. Carbon steel piping includes LTCS pipingalso.

Material Spec:Carbon Steel Piping (IBR) , THK. <= 10MMWORK: STEAM TRACERS CARBON STEELSize: NB 0.75 INCH _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00210 CHEMICAL CLEANING 01.03.2016_______________________________________________________________________ The item 00210 covers the following services:_______________________________________________________________________ 10 5 M

ITEM NO: M19901140000 SIZE: NB 0.5 INCH (Meter) _________________________________________________________________

CHEMICAL CLEANING/PICKLING:


Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Work



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________shall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.

WORK: CHEMICAL CLEANING OF BOILERS BY ALKALI BOILOUT METHOD AS PER SPEC. NO.A710-0642-CC-007-G15

SIZE: NB 0.5 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 5 M

ITEM NO: M19901140000 SIZE: NB 0.75 IN (Meter) _________________________________________________________________



Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.





SIZE: NB 0.75 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 30 M






SIZE: NB 1.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 85 M









SIZE: NB 1.50 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 5 M







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________WORK: CHEMICAL CLEANING OF BOILERS BY ALKALI BOILOUT METHOD AS PER SPEC. NO.A710-0642-CC-007-G15

SIZE: NB 2.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 5 M






SIZE: NB 3.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 5 M







WORK: DEGREASING OF AMINE VESSELS, EQUIPMENTS AND AMINE PIPING AS PER SPEC.NO. A710-0642-CC-003-G15

SIZE: NB 0.5 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 10 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specifications and instructions of Engineer-in-Charge.


SIZE: NB 0.75 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 5 M






SIZE: NB 1.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 10 M




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CHEMICAL CLEANING/PICKLING:




SIZE: NB 1.50 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 5 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpower



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________during the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.


SIZE: NB 2.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 100 M






SIZE: NB 3.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 140 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________ITEM NO: M19901150000 SIZE: NB 4.0 INCH (Meter)

_________________________________________________________________CHEMICAL CLEANING/PICKLING:




SIZE: NB 4.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 340 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________operating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.


SIZE: NB 6.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 5 M




WORK: PASSIVATION FOR CATALYST AS PER SPEC. NO.A710-129/134-03-SM-1005

SIZE: NB 0.50 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 10 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________ITEM NO: M19901170000 SIZE: NB 0.75 INCH (Meter)





SIZE: NB 0.75 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 10 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to be



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________deployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.


SIZE: NB 1.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 215 M






SIZE: NB 1.50 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 65 M

ITEM NO: M19901170000 SIZE: NB 2.00 INCH (Meter)








SIZE: NB 2.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 20 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpower



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________during the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.


SIZE: NB 3.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 5 M






SIZE: NB 4.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 75 M




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CHEMICAL CLEANING/PICKLING:




SIZE: NB 6.00 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 65 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expressly



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________mentioned herein and in specification but required to perform the work as perspecifications and instructions of Engineer-in-Charge.


SIZE: NB 14.0 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 95 M






SIZE: NB 20.0 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 45 M









SIZE: NB 24.0 IN _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 40 M




Chemical Cleaning of Piping and Vessels as indicated in marked up P&IDS. Workshall include supply of all Chemicals, temporary facilities, auxiliaries,boilers, heating coils, thermometers, valves, pressure gauges, safety gearsetc required for satisfactory completion of work. The contractor should make apreliminary assessment of the site conditions and its existing facilitiesespecially availability of HP/MP Steam, Circulating pumps, Amine Tanks, etc tomake a final assessment of the temporary facilities, auxiliaries and sparesthat has to be arranged by him for deployment at site. Required numbers ofoperating and supervisory staff for the Degreasing operation need to bedeployed by the contractor so as to ensure continuous availability of manpowerduring the entire operation and whatever else even though not expresslymentioned herein and in specification but required to perform the work as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specifications and instructions of Engineer-in-Charge.


SIZE: NB 28.0 IN _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00220 CEMENT LINING AND ERECTION 01.03.2016_______________________________________________________________________ The item 00220 covers the following services:_______________________________________________________________________ 10 65 M

NB 3.000 INCHES (Meter) _________________________________________________________________

CEMENT LINING AND ERECTION OF CEMENT LINED PIPES- ABOVE GROUND (For pipingclass A5Y,A33Y):


Transportation of all piping items (including specials) from Owner's/Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as perspec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves afterFRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.




SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 120 M

NB 4.000 INCHES (Meter) _________________________________________________________________




SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 265 M

NB 6.000 INCHES (Meter)




_________________________________________________________________CEMENT LINING AND ERECTION OF CEMENT LINED PIPES- ABOVE GROUND (For pipingclass A5Y,A33Y):



SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 75 M

NB 8.000 INCHES (Meter) _________________________________________________________________



Transportation of all piping items (including specials) from Owner's/



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as perspec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves afterFRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.

SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 120 M

NB 10.000 INCHES (Meter) _________________________________________________________________



Transportation of all piping items (including specials) from Owner's/Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as perspec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves after



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________FRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.

SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 30 M

NB 12.000 INCHES (Meter) _________________________________________________________________



Transportation of all piping items (including specials) from Owner's/Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as perspec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves afterFRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.

SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 215 M

NB 14.000 INCHES (Meter) _________________________________________________________________




SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




80 5 M NB 16.000 INCHES (Meter)

_________________________________________________________________CEMENT LINING AND ERECTION OF CEMENT LINED PIPES- ABOVE GROUND (For pipingclass A5Y,A33Y):



SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 10 M

NB 18.000 INCHES (Meter) _________________________________________________________________







SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 5 M

NB 20.000 INCHES (Meter) _________________________________________________________________



Transportation of all piping items (including specials) from Owner's/Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________spec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves afterFRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.

SIZE: NB 20.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 10 M

NB 24.000 INCHES (Meter) _________________________________________________________________



Transportation of all piping items (including specials) from Owner's/Contractor's storage point to workshop, fabrication includingcutting, edgepreparation,fitup,bending, welding, threading etc., preparing requisite spoolsincluding welding of flanges to pipe,fittings,specials etc., as per pipingdrawings/isometrics,cleaning and flushing by water/compressed air, hydrostatictesting of the prefabricated spools and any other type of testing asspecified, draining, drying by compressed air, internal surface preparation,application of prefabrication primer and carrying out cement lining as perspec.A710- 6-44-0074 installation of insulating flanged joints, flangedjoints, carrying out FRE coating inside valve body, Testing of valves afterFRE coating and assembly and FRE coating of spectacle blinds, spacer & blinds,wetted face of blind flanges for sizes 3 inch and above, tapering ofcementlining at flanged end to accommodate movement of butterfly valve disc,transportation of cement lined spools and other piping items to worksite andlaying of pipes overhead onracks and at all elevations, connecting withequipment nozzles, strainers, orifice assemblies, spray nozzles,tapping forpressure gauges, thermowells,sample connections including fixing of gaskets,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________bolts,nuts wherever required and all other inline instruments and fittingslike elbows, reducers, tees, vents, drains, reinforcement pads etc.,hydrostatic testing of the piping, completing all such works in all respectsas per the specification, drawings and instructions of Engineerincharge.

SIZE: NB 24.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00230 FRE LINING OF VALVES 01.03.2016_______________________________________________________________________ The item 00230 covers the following services:_______________________________________________________________________ 10 1 NO

NB 3.00 INCHES (Number) _________________________________________________________________

FRE LINING OF VALVES, BLIND FLANGES & STRAINERS:


Valves and Y-type strainers for 3.0" and above sizes coming under spec A5Y andA33Y, shall be internally FRE lined, except the trims, at site. Also, all theBlind Flanges, Fig-8 Flanges, Spacer & Blinds, valves coming under A5Y & A33Yshall be FRE lined for the wetted portion. Transportation of valves,strainers, blind flanges, Fig-8 flanges, specers and blinds etc. fromOwner's/Contractor's storage point to workshop/ worksite including supply ofcoating materials, equipments, tools and tackles required for FRE lining andcarrying our FRE lining is under Contractor's scope.

FRE lining is to be carried out as per EIL Standard and instructions ofEngineer-in-Charge.

ITEM: VALVES 150#

SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 7 NO





_________________________________________________________________





ITEM: VALVES 150#

SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 10 NO

NB 6.00 INCHES (Number) _________________________________________________________________








ITEM: VALVES 150#

SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 9 NO

NB 8.00 INCHES (Number) _________________________________________________________________





ITEM: VALVES 150#

SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 12 NO

NB 10.00 INCHES (Number) _________________________________________________________________





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Valves and Y-type strainers for 3.0" and above sizes coming under spec A5Y andA33Y, shall be internally FRE lined, except the trims, at site. Also, all theBlind Flanges, Fig-8 Flanges, Spacer & Blinds, valves coming under A5Y & A33Yshall be FRE lined for the wetted portion. Transportation of valves,strainers, blind flanges, Fig-8 flanges, specers and blinds etc. fromOwner's/Contractor's storage point to workshop/ worksite including supply ofcoating materials, equipments, tools and tackles required for FRE lining andcarrying our FRE lining is under Contractor's scope.


ITEM: VALVES 150#

SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 7 NO

NB 12.00 INCHES (Number) _________________________________________________________________





ITEM: VALVES 150#

SIZE: NB 12.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 9 NO

NB 14.00 INCHES (Number) _________________________________________________________________





ITEM: VALVES 150#

SIZE: NB 14.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00240 FRE LINING BLIND FLANGES,FIG8, SPACERS,B 01.03.2016_______________________________________________________________________ The item 00240 covers the following services:_______________________________________________________________________ 10 70 NO

NB 3.00 INCHES (Number) _________________________________________________________________








ITEM: BLIND FLANGES, FIG-8, SPACERS & BLINDS,150#

SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 120 NO

NB 4.00 INCHES (Number) _________________________________________________________________






SIZE: NB 4.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 120 NO

NB 6.00 INCHES (Number) _________________________________________________________________






SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 125 NO

NB 8.00 INCHES (Number) _________________________________________________________________



Valves and Y-type strainers for 3.0" and above sizes coming under spec A5Y andA33Y, shall be internally FRE lined, except the trims, at site. Also, all theBlind Flanges, Fig-8 Flanges, Spacer & Blinds, valves coming under A5Y & A33Yshall be FRE lined for the wetted portion. Transportation of valves,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________strainers, blind flanges, Fig-8 flanges, specers and blinds etc. fromOwner's/Contractor's storage point to workshop/ worksite including supply ofcoating materials, equipments, tools and tackles required for FRE lining andcarrying our FRE lining is under Contractor's scope.



SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 134 NO

NB 10.00 INCHES (Number) _________________________________________________________________






SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 60 NO





_________________________________________________________________






SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 120 NO

NB 14.00 INCHES (Number) _________________________________________________________________









SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 1 NO

NB 16.00 INCHES (Number) _________________________________________________________________






SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 8 NO

NB 18.00 INCHES (Number) _________________________________________________________________





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Valves and Y-type strainers for 3.0" and above sizes coming under spec A5Y andA33Y, shall be internally FRE lined, except the trims, at site. Also, all theBlind Flanges, Fig-8 Flanges, Spacer & Blinds, valves coming under A5Y & A33Yshall be FRE lined for the wetted portion. Transportation of valves,strainers, blind flanges, Fig-8 flanges, specers and blinds etc. fromOwner's/Contractor's storage point to workshop/ worksite including supply ofcoating materials, equipments, tools and tackles required for FRE lining andcarrying our FRE lining is under Contractor's scope.



SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 1 NO

NB 20.00 INCHES (Number) _________________________________________________________________






SIZE: NB 20.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 5 NO

NB 24.00 INCHES (Number) _________________________________________________________________






SIZE: NB 24.0 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00250 LOW FRICTION PADS 01.03.2016_______________________________________________________________________ The item 00250 covers the following services:_______________________________________________________________________ 10 2 M2

TEFLON PAD (10MM THK.) (Square meter) _________________________________________________________________

LOW FRICTION PADS:





Supply, fabrication and fixing of low friction pads(Teflon/Graphite/SS304mirror finish) with suitable bonding materials/fasteners as specified indrawings/isometrics/special support sketches

TYPE: Teflon Pad(10mm thick) with compressive strength (0.25 Offset):1870 psi _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 2 M2

GRAPHITE PAD (12.7 THK) (Square meter) _________________________________________________________________

LOW FRICTION PADS:



TYPE: Graphite pad(12.7 mm thick) with compressive Strength2877 psi _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1 M2

STAINLESS STEEL 10 MM THK (Square meter) _________________________________________________________________

LOW FRICTION PADS:



TYPE: Stainless steel 10 mm thick with mirror finish SS 304 _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00260 PIPE DAVITS 01.03.2016_______________________________________________________________________ The item 00260 covers the following services:_______________________________________________________________________ 10 2.000 MT

Arm approximately 3.0 M, 4.0 M above pla (Tonnes) _________________________________________________________________

PIPE DAVITS: Arm approximately 3.0 M, 4.0 M above platform


Supply, fabrication & erection of pipe davits as per EIL std.7-12-023 forlowering of air cooler motors/ safety valves from structural platforms, fixingthe same to platforms,arranging empty drums with lid and loading of oldcatalyst in drums and shifting to desired location, inspection as per specs.,supply of all necessary materials, equipment, consumables, labour,supervisionetc. The work shall be carried out as per the specifications, drawings &instruction of Engineerincharge.

_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00270 CUTTING OF EXISTING LINES FOR HOOKUPS 01.03.2016_______________________________________________________________________ The item 00270 covers the following services:_______________________________________________________________________ 10 325 INM

CUTTING CS PIPING IBR/NON IBR UPTO 30 IN (Inch Meter) _________________________________________________________________

CUTTING AND REMOVAL OF EXISTING PIPING FOR INTRODUCING HOOK UP:




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Cutting of different sizes of CS (IBR/NON IBR)/SS piping of all types andthicknesses in position, at all elevations and removal of cut piping portionas per drawing/instruction of Engineerin-charge, including making necessarscaffoldings,consumables, machinery, tools, tackles, labour & supervision;providing temporary support, removal of insulation to extent required frominsulated lines; transporting all removed material to storage point (withincomplex) designated by Owner/EIL including stacking of material and disposingof waste etc as instructed by Engineer-in-charge.

work: CUTTING CS PIPING (IBR/NON IBR) UPTO 30.00 INCH _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 20 INM

CUTTING SS PIPING (IBR/NON IBR) (Inch Meter) _________________________________________________________________

CUTTING AND REMOVAL OF EXISTING PIPING FOR INTRODUCING HOOK UP:


Cutting of different sizes of CS (IBR/NON IBR)/SS piping of all types andthicknesses in position, at all elevations and removal of cut piping portionas per drawing/instruction of Engineerin-charge, including making necessarscaffoldings,consumables, machinery, tools, tackles, labour & supervision;providing temporary support, removal of insulation to extent required frominsulated lines; transporting all removed material to storage point (withincomplex) designated by Owner/EIL including stacking of material and disposingof waste etc as instructed by Engineer-in-charge.

work: CUTTING SS PIPING (IBR/NON IBR) _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00280 REMOVAL OF ERECTED PIPE (ABOVE GROUND) 01.03.2016_______________________________________________________________________ The item 00280 covers the following services:_______________________________________________________________________ 10 4,500 INM

CS/AS/SS PIPING (Inch Meter)




_________________________________________________________________

REMOVAL OF ERECTED PIPING(ABOVE GROUND) OF CS/AS/SS PIPING :-


Removal of all piping items existing/ erected at all elevations, unbolting offlanged joints, cutting of pipe lines wherever required, removal of insulationfrom insulated lines, removing supports, steam tracers, removal of allfittings and flanges, instruments ,valves etc. including providing assistanceto owner for draining, cleaning and purging of the lines to be removed,completing all such works in all respects, cutting of pipes in appropriatelength for transporting purposes, cleaning, flushing, drying and transportingall materials to storage point(within the complex battery limits) designatedby Owner/EIL including stacking of material and disposing of waste etc formodification asrequired as per GADs/P&IDs/instructions of Engineer In charge. _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00290 RE-INSTA. OF DISMANTLED EXISTING PIPING 01.03.2016_______________________________________________________________________ The item 00290 covers the following services:_______________________________________________________________________ 10 1,300 INM

C.S./A.S./S.S. Piping (NB 0.5 & ABOVE) (Inch Meter) _________________________________________________________________

RE-INSTALLATION OF DISMANTLED EXISTING PIPING C.S./A.S./S.S. Piping (sizerange NB 0.5 & above):


Re-installation of dismantled piping including fittings, valves, flanges,instruments, control valves, special items etc (existing piping may berequired to dismantled temporarily for the removal of existing equipments,pumps, Piping etc or shifting of the piping/piping system to provide space fornew facilities/piping.)at all elevations including cutting, edge preparation(inclusive of grinding the edges of pipes.), fittings, flanges etc to matchwith the matching edges o uneven/different thicknesses, wherever required);fitup, bending, preheating wherever required, welding, threading & laying ofnew/dismantled pipes of all types & thicknesses over sleepers, overhead onracks & it all elevations connecting with equipments nozzles, strainers, steam



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________traps, orifice assemblies, spray nozzles, rotameter, existing/new pipingsystems, tapping for pressure gauges, thermowells, sample connection etc.including fixing of gasket, bolts & nuts wherever required and all otherinline instruments and fittings, alignment, cleaning and flushing bywater/compressed air hydrostatic, pneumatic, vacuum, spark testing and anyother type of testing as specified, draining,drying by compressed air,completing all such work in all respect as specified in special condition ofcontract and as per specifications, drawings and instructions byEngineer-in-Charge. No separate payment shall be made for dismantling ofpiping.

_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00300 CONCRETE PEDSTALS FOR PIPE SUPPORTS 01.03.2016_______________________________________________________________________ The item 00300 covers the following services:_______________________________________________________________________ 10 40.000 M3

CONCRETE PEDSTALS FOR PIPE SUPPORTS: (Cubic meter) _________________________________________________________________

CONCRETE PEDSTALS FOR PIPE SUPPORTS:


Construction of ordinary cement concrete pedstal with inserts using M25 gradeas per EIL standard 7-67- 0010.Welding of pipe supports including earthwork inexcavation, dewatering if required, shuttering, fabrication and fixing ofmetal inserts, including levelling, finishing top surface, curing,backfilling, levelling the area, removal of surplus earth, complete in allrespects as per instruction of Engineer-in-charge.

_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00310 COMMISSIONG/PRE-COMMISSIONING ASSISTANCE 01.03.2016_______________________________________________________________________ The item 00310 covers the following services:_______________________________________________________________________




10 1,000 MDY PRE-COMMISSIONING / COMMISSIONING ASSIST (Mandays)

_________________________________________________________________PRE-COMMISSIONING / COMMISSIONINGASSISTANCE :


Carrying out Pre-commissioning /Commissioning activities such as dropping thevalves, control valves and spool pieces, air and water flushing andair-blasting, steam blowing, air drying, re-installing the valves, controlvalves and spool pieces, leak testing etc. as per pre-commissioning /commissioning specification/ procedure and instruction of Engineerinchargeincluding supply of necessary hand tools, equipments/ machinery, consumables(electrodes, filler wire, gas, card board, target plate, scaffolding etc.wherever required) and with single point responsibility of Contractor'ssupervision.

Note : This manpower will be utilized for Pre-commissioning & Commissioningrequirement over and above that already described elsewhere in this SOR.

One Man day is 12 hour duty. _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00320 FABRICATED JACKETED C.S. CROSSES 01.03.2016_______________________________________________________________________ The item 00320 covers the following services:_______________________________________________________________________ 10 1 NO

NB 2.000 INCHES (Number) _________________________________________________________________

JACKETED PIPING (CONTINUOUS JACKETING):

Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M19923000000)

Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________drawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.

WORK: FABRICATED JACKETED C.S. CROSSES (Specifiedsize is the jacket size)

SIZE: NB 2.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1 NO

NB 3.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portion



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 3.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1 NO

NB 5.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 5.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 NO

NB 6.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 6.000 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 23 NO

NB 10.000 INCHES (Number) _________________________________________________________________





SIZE: NB 10.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 20 NO





_________________________________________________________________JACKETED PIPING (CONTINUOUS JACKETING):




SIZE: NB 16.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 14 NO

NB 18.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor's



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________storage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 18.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 7 NO

NB 24.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 24.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 7 NO

NB 28.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shall



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________be done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 28.00 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00330 FABRICATED JACKETED S.S. CROSSES 01.03.2016_______________________________________________________________________ The item 00330 covers the following services:_______________________________________________________________________ 10 17 NO

NB 6.000 INCHES (Number) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing piping



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________like centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.

WORK: FABRICATED JACKETED S.S. CROSSES (Specifiedsize is the jacket size)

SIZE: NB 6.000 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00340 JACKETED (CONT.) PIPING INNER & OUTER CS 01.03.2016_______________________________________________________________________ The item 00340 covers the following services:_______________________________________________________________________ 10 5 M

NB 0.750 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to be



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________supplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.

WORK: JACKETED (CONTINUOUS) PIPING INNER & OUTERCS: (Specified size is the core size)

SIZE: NB 0.750 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 10 M

NB 1.000 INCHES (Meter) _________________________________________________________________









_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 5 M

NB 1.500 INCHES (Meter) _________________________________________________________________





SIZE: NB 1.500 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________NB 2.000 INCHES (Meter)





SIZE: NB 2.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 5 M

NB 3.000 INCHES (Meter) _________________________________________________________________





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 3.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 10 M

NB 4.000 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 4.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 95 M

NB 8.000 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 8.000 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 5 M

NB 12.000 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses are



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________of jacket pipe.


SIZE: NB 12.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 195 M

NB 14.000 INCHES (Meter) _________________________________________________________________





SIZE: NB 14.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 105 M

NB 16.000 INCHES (Meter) _________________________________________________________________





SIZE: NB 16.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 35 M

NB 20.000 INCHES (Meter)








SIZE: NB 20.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 50 M

NB 24.000 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor's



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________storage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.


SIZE: NB 24.00 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00350 JACKETED (CONT.) PIPING INNER & OUTER SS 01.03.2016_______________________________________________________________________ The item 00350 covers the following services:_______________________________________________________________________ 10 70 M

NB 4.000 INCHES (Meter) _________________________________________________________________



Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specs. Supply of all necessary equipment, consumables,labour,supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.Composite Piping work for inner core and outer jacket,break-up Flanges, Jacketed crosses, jacketed mitres fordirection change, Jacketed reducers including in-endblinds, connection of inlet &outlet steam nozzles, jump-overs from one section toanother including steam tracing of non-jacketed portionincluding valves etc as per job spec. A710-6-44 0078.Fabrication of flanged crosses, mitres and reducers shallbe done from materials supplied by Owner.All items required for completing steam jacketing pipinglike centering rings, guide strip, wear plate, baffles, jacketending rings and jacket breaking rings etc are to besupplied by contractor.Note: Sizes mentioned under the heading of Crosses areof jacket pipe.

WORK: JACKETED (CONTINUOUS) PIPING INNER & OUTERSS : (Specified size is the core size)

SIZE: NB 4.000 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00360 HOT TAPPING 01.03.2016_______________________________________________________________________ The item 00360 covers the following services:_______________________________________________________________________ 10 2 NO

6" CARBON STEEL TAPPING (Number) _________________________________________________________________

HOT TAPPING:


Transportation of materials from Owner's/ Contractor'sstorage points to worksite/ workshop; Cutting, fitup, edgepreparing, welding, bending, testing & inspection as perspecs. Supply of all necessary equipment, consumables,labour,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________supervision etc. The work shall be carried out as perdrawings, specs & instructions of Engineer-in-charge.

WORK: 6"(Carbon Steel)tapping is to be taken from the14" and 18"(Carbon Steel)flare header (at the tie-in points129-TP-1033-02 and 134-TP-1163-01 in the Line number14"-FL-129-03301-A19A-IT and 18"-FL-134-6301-A1Arespectively).The Tie-in point sketches (Will be given tosucessful bidder) & the piping scope of work as perclause no.1.56.14a to 1.56.14bof the document no.A710-000-16-43-SOW-3010 shall be referred for contractor's scope ofwork & supply and the work shall be completed in allrespects as per instructions of the Site-engineer-incharge.

SIZE: NB 6.000 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00370 PAINTING UNINSULATED CS SURFACES 01.03.2016_______________________________________________________________________ The item 00370 covers the following services:_______________________________________________________________________ 10 550 M

PIPES (TEMP: 0 TO 100 DEG C) SIZE .5 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-


Supply of paints and primers,preparation of surfaces and application of primerand finish paints, identification (Line numbering), lettering, colour bands,colour coding etc. as specified including rubdown and touch up of shop primerwherever required, providing scaffolding for all heights, labour, material,tools and tackles, consumables supervision etc. to complete the work in allrespects as per BPCL spec.BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)drawings and direction of Engineer-in-Charge for all types of uninsulatedpiping and insulated piping as specified including all pipes, fittings,flanges, supports, valves etc. Surface preparation by blast cleaning andapplication of first coat of primer shall be done in fabrication yard prior toerection. For insulated piping wherever blast cleaning with no primerapplication is specified, in such cases finish paints shall also be applied in



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________the fabrication yard. The identification marks of the piping and joints shallbe noted before blasting and the same shall be transferred on primed surfaceas per BPCL painting specification or as per the instructions ofEngineer-in-Charge.

Notes:1. All joints (fabrication as well as erection joints) shall be left unpaintedtill hydrotesting.2. No extra payment shallbe made for identification (line numbering etc.) ofinsulated and uninsulated lines.

Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 0.5 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 50 M

PIPES (TEMP: 0 TO 100 DEG C) SIZE .75 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-


Supply of paints and primers,preparation of surfaces and application of primerand finish paints, identification (Line numbering), lettering, colour bands,colour coding etc. as specified including rubdown and touch up of shop primerwherever required, providing scaffolding for all heights, labour, material,tools and tackles, consumables supervision etc. to complete the work in allrespects as per BPCL spec.BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)drawings and direction of Engineer-in-Charge for all types of uninsulatedpiping and insulated piping as specified including all pipes, fittings,flanges, supports, valves etc. Surface preparation by blast cleaning andapplication of first coat of primer shall be done in fabrication yard prior toerection. For insulated piping wherever blast cleaning with no primerapplication is specified, in such cases finish paints shall also be applied inthe fabrication yard. The identification marks of the piping and joints shall



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________be noted before blasting and the same shall be transferred on primed surfaceas per BPCL painting specification or as per the instructions ofEngineer-in-Charge.



item: PIPES

SIZE: NB 0.75 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 840 M

PIPES (TEMP: 0 TO 100 DEG C) SIZE 1 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-


Supply of paints and primers,preparation of surfaces and application of primerand finish paints, identification (Line numbering), lettering, colour bands,colour coding etc. as specified including rubdown and touch up of shop primerwherever required, providing scaffolding for all heights, labour, material,tools and tackles, consumables supervision etc. to complete the work in allrespects as per BPCL spec.BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)drawings and direction of Engineer-in-Charge for all types of uninsulatedpiping and insulated piping as specified including all pipes, fittings,flanges, supports, valves etc. Surface preparation by blast cleaning andapplication of first coat of primer shall be done in fabrication yard prior toerection. For insulated piping wherever blast cleaning with no primerapplication is specified, in such cases finish paints shall also be applied inthe fabrication yard. The identification marks of the piping and joints shallbe noted before blasting and the same shall be transferred on primed surface



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________as per BPCL painting specification or as per the instructions ofEngineer-in-Charge.



item: PIPES

SIZE: NB 1.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 1,170 M

PIPES (TEMP: 0 TO 100 DEG C) SIZE 1.5 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-


Supply of paints and primers,preparation of surfaces and application of primerand finish paints, identification (Line numbering), lettering, colour bands,colour coding etc. as specified including rubdown and touch up of shop primerwherever required, providing scaffolding for all heights, labour, material,tools and tackles, consumables supervision etc. to complete the work in allrespects as per BPCL spec.BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)drawings and direction of Engineer-in-Charge for all types of uninsulatedpiping and insulated piping as specified including all pipes, fittings,flanges, supports, valves etc. Surface preparation by blast cleaning andapplication of first coat of primer shall be done in fabrication yard prior toerection. For insulated piping wherever blast cleaning with no primerapplication is specified, in such cases finish paints shall also be applied inthe fabrication yard. The identification marks of the piping and joints shallbe noted before blasting and the same shall be transferred on primed surfaceas per BPCL painting specification or as per the instructions of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Engineer-in-Charge.



item: PIPES

SIZE: NB 1.50 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 450 M


PAINTING (UNITS) :-


Supply of paints and primers,preparation of surfaces and application of primerand finish paints, identification (Line numbering), lettering, colour bands,colour coding etc. as specified including rubdown and touch up of shop primerwherever required, providing scaffolding for all heights, labour, material,tools and tackles, consumables supervision etc. to complete the work in allrespects as per BPCL spec.BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)drawings and direction of Engineer-in-Charge for all types of uninsulatedpiping and insulated piping as specified including all pipes, fittings,flanges, supports, valves etc. Surface preparation by blast cleaning andapplication of first coat of primer shall be done in fabrication yard prior toerection. For insulated piping wherever blast cleaning with no primerapplication is specified, in such cases finish paints shall also be applied inthe fabrication yard. The identification marks of the piping and joints shallbe noted before blasting and the same shall be transferred on primed surfaceas per BPCL painting specification or as per the instructions ofEngineer-in-Charge.






item: PIPES

SIZE: NB 2.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 400 M


PAINTING (UNITS) :-





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Notes:1. All joints (fabrication as well as erection joints) shall be left unpaintedtill hydrotesting.2. No extra payment shallbe made for identification (line numbering etc.) ofinsulated and uninsulated lines.


item: PIPES

SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 190 M


PAINTING (UNITS) :-



Notes:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________1. All joints (fabrication as well as erection joints) shall be left unpaintedtill hydrotesting.2. No extra payment shallbe made for identification (line numbering etc.) ofinsulated and uninsulated lines.


item: PIPES

SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 455 M


PAINTING (UNITS) :-



Notes:1. All joints (fabrication as well as erection joints) shall be left unpainted



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________till hydrotesting.2. No extra payment shallbe made for identification (line numbering etc.) ofinsulated and uninsulated lines.


item: PIPES

SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 100 M


PAINTING (UNITS) :-



Notes:1. All joints (fabrication as well as erection joints) shall be left unpaintedtill hydrotesting.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________2. No extra payment shallbe made for identification (line numbering etc.) ofinsulated and uninsulated lines.


item: PIPES

SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 145 M


PAINTING (UNITS) :-



Notes:1. All joints (fabrication as well as erection joints) shall be left unpaintedtill hydrotesting.2. No extra payment shallbe made for identification (line numbering etc.) of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________insulated and uninsulated lines.


item: PIPES

SIZE: NB 10.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 50 M


PAINTING (UNITS) :-








item: PIPES

SIZE: NB 12.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 235 M


PAINTING (UNITS) :-






Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 14.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 25 M


PAINTING (UNITS) :-

Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:MM39400000000)



Surface type:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 16.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 5 M


PAINTING (UNITS) :-




Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 18.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 5 M


PAINTING (UNITS) :-




Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATION



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 24.0 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 64 NO

VALVES (TEMP: 0-100 DEG C) SIZE 2IN (Number) _________________________________________________________________

PAINTING (UNITS) :-




Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: VALVES

SIZE: NB 2.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 49 NO


PAINTING (UNITS) :-




Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 100 (DEG C)SYSTEM-1 OF BPCL PAINTING SPECIFICAITON,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)

item: VALVES

SIZE: NB 3.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 13 NO


PAINTING (UNITS) :-








item: VALVES

SIZE: NB 4.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 13 NO


PAINTING (UNITS) :-







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________item: VALVES

SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 9 NO


PAINTING (UNITS) :-





item: VALVES




SIZE: NB 8.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 3 NO


PAINTING (UNITS) :-





item: VALVES





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 3 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 14.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 1,310 M

PIPES (TEMP 101-400 DEG C) SIZE .5 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-




Surface type:PAINTING OF UNINSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 101 TO 400 (DEG C)SYSTEM-7 OF BPCL PAINTING SPECIFICAITON, BPCL Doc. No.AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB 0.50 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 396 M

PIPES (TEMP 101-400 DEG C) SIZE .75IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 0.75 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 45 M

PIPES (TEMP 101-400 DEG C) SIZE 1 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 275 M

PIPES (TEMP 101-400 DEG C) SIZE 1.5IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.50 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 625 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 2.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 250 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 3.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 115 M

PIPES (TEMP 101-400 DEG C) SIZE 4IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 4.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 755 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 6.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 25 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 8.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 80 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 12.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 35 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 14.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 65 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 16.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 40 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 18.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 68 NO

VALVES(TEMP 101-400 DEG C) SIZE 2 IN (Number) _________________________________________________________________

PAINTING (UNITS) :-





item: VALVES

SIZE: NB 2.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 38 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 3.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 16 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 4.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 12 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 6.00 INCHES _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00380 PAINTING INSULATED CS SURFACES 01.03.2016_______________________________________________________________________ The item 00380 covers the following services:_______________________________________________________________________ 10 200 M

PIPES (TEMP 0-200 DEG C) SIZE .5IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-




Surface type:PAINTING OF INSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 200 (DEG C)SYSTEM-3 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)




item: PIPES

SIZE: NB 0.5 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 170 M


PAINTING (UNITS) :-







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________item: PIPES

SIZE: NB 0.75 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 150 M


PAINTING (UNITS) :-





item: PIPES




SIZE: NB 1.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 115 M


PAINTING (UNITS) :-





item: PIPES





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 880 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 2.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 245 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 3.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 295 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 4.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 5 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 5.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 260 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 6.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 90 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 8.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 155 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 10.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 140 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 12.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 90 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 14.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 315 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 16.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 130 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 18.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 105 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 20.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 45 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 24.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 60 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 28.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 200 NO

VALVES (TEMP 0-200 DEG C) SIZE 2 IN (Number) _________________________________________________________________

PAINTING (UNITS) :-





item: VALVES

SIZE: NB 2.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 53 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 3.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 44 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 4.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 43 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 6.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 21 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 8.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 9 NO

VALVES (TEMP 0-200 DEG C) SIZE 10IN (Number) _________________________________________________________________

PAINTING (UNITS) :-





item: VALVES

SIZE: NB 10.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 16 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 12.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 4 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 14.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 7 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 16.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 4 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 20.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 185 M

PIPES (TEMP 201-400 DEG C) SIZE 0.5 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-




Surface type:PAINTING OF INSULATED CS SURFACES USING Cu-SLAG BLASTING TO Sa 2.5 (Min.Profile 50 microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 201 TO 400 (DEG C)SYSTEM-4 OF BPCL PAINTING SPECIFICAITON, BPCL Doc. No.AE-S-5430, Rev-1(March'15 edition)

item: PIPES

SIZE: NB O.50 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 5 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB O.75 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 5 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 45 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.50 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 5 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 6.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 25 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 20.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 70 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 24.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 70 M


PAINTING (UNITS) :-





item: PIPES

SIZE: NB 28.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 3 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 6.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 1 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 24.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 1 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 28.0 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 3 NO


PAINTING (UNITS) :-





item: VALVES

SIZE: NB 24.0 INCHES _________________________________________________________________






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00390 PAINTING INSULATED SS SURACES 01.03.2016_______________________________________________________________________ The item 00390 covers the following services:_______________________________________________________________________ 10 5 M


PAINTING (UNITS) :-




Surface type:PAINTING INSULATED SS SURACES USING Cu-SLAGBLASTING TO Sa 2.5 (Min. Profile 50microns) AS SURFACE PREPARATIONCONDITION:DESIGN TEMP GROUP: 0 TO 200 (DEG C)SYSTEM-3 OF BPCL PAINTING SPECIFICAITON,BPCL Doc. No. AE-S-5430, Rev-1(March'15 edition)




item: PIPES

SIZE: NB 0.75 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 10 M


PAINTING (UNITS) :-








SIZE: NB 1.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 75 M


PAINTING (UNITS) :-





item: PIPES




SIZE: NB 6.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 NO

VALVES (TEMP 0-200 DEG C) SIZE 4.0 IN (Number) _________________________________________________________________

PAINTING (UNITS) :-





item: VALVES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________00400 PAINTING FOR GI SURFACES 01.03.2016_______________________________________________________________________ The item 00400 covers the following services:_______________________________________________________________________ 10 5 M

PIPES 0.5 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-




Surface type:PAINTING FOR GI SURFACES (EXCLUDING GALVANISED THICKNESS) AS PER BPCL PAINTINGSYSTEM-26

item: PIPES




SIZE: NB 0.50 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 5 M

PIPES 0.75 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 0.75 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 25 M

PIPES 1.00 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.00 INCHES _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 M

PIPES 1.50 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-





item: PIPES

SIZE: NB 1.50 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 62 M

PIPES 2.00 IN (Meter) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________PAINTING (UNITS) :-





item: PIPES

SIZE: NB 2.00 INCHES _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 120 M

PIPES 3.00 IN (Meter) _________________________________________________________________

PAINTING (UNITS) :-








item: PIPES

SIZE: NB 3.00 INCHES _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00410 INSULA: IH TYPE; CS & AS; ROCKWOOL 01.03.2016_______________________________________________________________________ The item 00410 covers the following services:_______________________________________________________________________ 10 15 M

PIPE NB 0.5 IN THK.25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________

HOT INSULATION (UNITS) :-

Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________No:M50101000000)

HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)

INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL

item: PIPES

SIZE: NB 0.50 INCHES , THK 25 MM _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 10 M

PIPE NB 0.75IN THK.25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________



HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 35 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspection



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________at site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 95 M


HOT INSULATION (UNITS) :-Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50101000000)

HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________flanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 10 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________applicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 3,245 M

PIPE NB .5IN THK 25MM TEMP 126-350 DEG C (Meter) _________________________________________________________________




INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 (DEG C);



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 170 M

PIPE NB .5IN THK 35MM TEMP 126-350 DEG C (Meter) _________________________________________________________________




INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 (DEG C);INSULATION MATERIAL : ROCKWOOL

item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 115 M

PIPE NB .75IN THK 25MM TEMP 126-350 DEGC (Meter) _________________________________________________________________





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________




90 10 M PIPE NB .75IN THK 40MM TEMP 126-350 DEGC (Meter)

_________________________________________________________________HOT INSULATION (UNITS) :-




item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 10 M

PIPE NB 1 IN THK 45MM TEMP 126-350 DEG C (Meter) _________________________________________________________________

HOT INSULATION (UNITS) :-Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 item



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________No:M50102000000)



item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 340 M

PIPE NB 1.5IN THK 25MM TEMP 126-350 DEGC (Meter) _________________________________________________________________


HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________materials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 10 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulation



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________on surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 40 M









item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 10 M








item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 325 M

PIPE NB 2IN THK 25MM TEMP 126-350 DEGC (Meter) _________________________________________________________________








item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 15 M






item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 100 M






item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________




180 50 M PIPE NB 6IN THK 30MM TEMP 126-350 DEGC (Meter)





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 10 M





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50102000000)



item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 105 M

PIPE NB 10" THK 30MM TEMP 126-350 DEGC (Meter) _________________________________________________________________



HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 230 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approved



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________party) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 120 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 15 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in all



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________respect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 15 M




INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & AS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________OPERATING TEMP. RANGE : 126-350 (DEG C);INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 50 M






item: PIPES



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SIZE: NB 24.0 INCHES , THK 30 MM _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 20 M






item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 50 M






item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 60 M









item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 35 M




HOT INSULATION (UNITS) ; Providing thermal insulation



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 35 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd party



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________inspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 15 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwise



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________securing , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 3 NO

FLG ASSY 3" THK 25 MM (126-350 DEG C) (Number) _________________________________________________________________



HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: FLANGE ASSEMBLIES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 4 NO







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 (DEG C);INSULATION MATERIAL : ROCKWOOL




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 1 NO











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 16 NO

BL.FLG.ASSY .75" THK 25MM (126-350 DEG C (Number) _________________________________________________________________




item: BLIND FLANGE ASSEMBLIES

SIZE: NB O.75 INCHES , THK 25 MM _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 5 NO

BL.FLG.ASSY 1.5" THK 25MM (126-350 DEG C (Number) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 17 NO

BL.FLG.ASSY 2" THK 25MM (126-350 DEG C (Number) _________________________________________________________________










_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 5 NO

BL.FLG.ASSY 4" THK 25MM (126-350 DEG C (Number) _________________________________________________________________


HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 5 NO

VLV.ASSY 1.5" THK 25MM (126-350 DEG C) (Number) _________________________________________________________________



HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspection



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________at site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: VALVE ASSEMBLIES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 49 NO

VLV.ASSY 2" THK 25MM (126-350 DEG C) (Number) _________________________________________________________________










_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 410 4 NO




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________applicable EIL specification)





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 420 8 NO





INSULATION TYPE: IH (Insulation for Heat Conservation)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 (DEG C);







_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 430 4 NO













_____________________________________________________________________________________________________________________________________________________________________________________________________________________00420 INSULA: IT TYPE; CS & AS; ROCKWOOL 01.03.2016_______________________________________________________________________ The item 00420 covers the following services:_______________________________________________________________________ 10 10 M

PIPE 0.5" THK 25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________



INSULATION TYPE: IT (Insulation for Steam Traced Lines)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 85 M

PIPE 0.75"THK 25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________




30 115 M PIPE 1" THK 25 MM TEMP<=125 DEG C (Meter)





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 10 M

PIPE 1.5" THK 25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________







item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 510 M

PIPE 2" THK 25 MM TEMP<=125 DEG C (Meter) _________________________________________________________________



HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 210 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approved





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 195 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 85 M




HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in all





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 85 M




INSULATION TYPE: IT (Insulation for Steam Traced Lines)SURFACE MATERIAL:CS & AS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________OPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 55 M






item: PIPES



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SIZE: NB 10.0 INCHES , THK 25 MM _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 120 M






item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 80 M


HOT INSULATION (UNITS) ;




item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 65 M







Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 105 M




Providing thermal insulation



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 3 NO

FLG.ASSY 1.5" THK 25MM TEMP<=125 DEG C (Number) _________________________________________________________________

HOT INSULATION (UNITS):-


Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd party








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 9 NO




Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwise



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________securing , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 9 NO




Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 4 NO







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________INSULATION TYPE: IT (Insulation for Steam Traced Lines)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 8 NO








Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________item: FLANGE ASSEMBLIES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 4 NO

FLG.ASSY 10" THK 25MM TEMP<=125 DEG C (Number) _________________________________________________________________











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 4 NO









_____________________________________________________________________________________________________________________________________________________________________________________________________________________




220 3 NO FLG.ASSY 14" THK 25MM TEMP<=125 DEG C (Number)

_________________________________________________________________HOT INSULATION (UNITS):-







_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 3 NO











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 3 NO




Providing thermal insulationincluding supply of all insulating and ancillary materials,








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 103 NO

BL.FLG.ASSY .75" THK 25MM TEMP< 125 DEGC (Number) _________________________________________________________________



Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approved





item: BLINND FLANGE ASSEMBLIES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 4 NO

BL.FLG.ASSY 1.0" THK 25MM TEMP< 125 DEGC (Number) _________________________________________________________________



Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 8 NO




Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in all








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 1 NO





INSULATION TYPE: IT (Insulation for Steam Traced Lines)



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 1 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 16 NO

VLV.ASSY 0.5" THK 15MM TEMP<125 DEG C (Number) _________________________________________________________________











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 113 NO

VLV.ASSY .75" THK 15MM TEMP<125 DEG C (Number) _________________________________________________________________








_____________________________________________________________________________________________________________________________________________________________________________________________________________________




320 26 NO VLV.ASSY 1.0" THK 15MM TEMP<125 DEG C (Number)








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 16 NO











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 85 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 31 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 16 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 8 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 16 NO








Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 9 NO

VLV.ASSY 10" THK 15MM TEMP<125 DEG C (Number) _________________________________________________________________











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 8 NO












_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 410 4 NO









_____________________________________________________________________________________________________________________________________________________________________________________________________________________




420 5 NO VLV.ASSY 16" THK 15MM TEMP<125 DEG C (Number)








_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 430 1 NO











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 440 30 M

PIPE 0.5" THK 25 MM TEMP 126-350 DEG C (Meter) _________________________________________________________________







INSULATION TYPE: IT (Insulation for Steam Traced Lines)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 450 30 M









item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 460 10 M

PIPE 2.0" THL 25 MM TEMP 126-350 DEG C (Meter) _________________________________________________________________








item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 470 1 NO

FLG.ASSY 2" THK 35MM TEMP 126-350 DEG C (Number) _________________________________________________________________











_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 480 30 M

PIPE 0.5" THK 60MM TEMP 351-500 DEG C (Meter) _________________________________________________________________







Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 351-500 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES




_____________________________________________________________________________________________________________________________________________________________________________________________________________________00430 INSULA: IS TYPE; CS & AS; ROCKWOOL 01.03.2016_______________________________________________________________________ The item 00430 covers the following services:_______________________________________________________________________ 10 10 M

PIPE 0.5" THK 25 MM TEMP <=125 DEG C (Meter) _________________________________________________________________


Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50133000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)

INSULATION TYPE: IS (Insulation for Personal Safety)SURFACE MATERIAL:CS & AS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________OPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 15 M

PIPE .75" THK 25 MM TEMP <=125 DEG C (Meter) _________________________________________________________________



INSULATION TYPE: IS (Insulation for Personal Safety)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 10 M





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 20 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________PIPE 1.5" THK 25 MM TEMP <=125 DEG C (Meter)




item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 20 M






Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________ Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 20 M



Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50133000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd party





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 10 M



Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50133000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 105 M

PIPE 6" THK 25 MM TEMP <=125 DEG C (Meter) _________________________________________________________________


Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50133000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________instructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 10 M




INSULATION TYPE: IS (Insulation for Personal Safety)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : UPTO 125 DEG C;




item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 20 M





item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 15 M





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 30 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________PIPE 16" THK 25 MM TEMP <=125 DEG C (Meter)




item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 15 M








item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 10 M



Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50134000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd party




INSULATION TYPE: IS (Insulation for Personal Safety)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 DEG C;INSULATION MATERIAL : ROCKWOOL

item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 10 M



Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50134000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,





item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 35 M



Scope of work: (As per EIL SOR A710-000-55-43-PK-SOR-000-0 itemNo:M50134000000) Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________instructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


item: PIPES



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 35 M




INSULATION TYPE: IS (Insulation for Personal Safety)SURFACE MATERIAL:CS & ASOPERATING TEMP. RANGE : 126-350 DEG C;




item: PIPES




_____________________________________________________________________________________________________________________________________________________________________________________________________________________00440 INSULA: IS TYPE; SS; INHIBITED ROCKWOOL 01.03.2016_______________________________________________________________________ The item 00440 covers the following services:_______________________________________________________________________ 10 75 M

PIPE 6" THK 30 MM TEMP 126 TO 350 DEG C (Meter) _________________________________________________________________



INSULATION TYPE: IH (Insulation for Heat Conversation)SURFACE MATERIAL:SSOPERATING TEMP. RANGE : 126 to 350 DEG C;INSULATION MATERIAL : INHIBITED ROCKWOOL




item: PIPES




_____________________________________________________________________________________________________________________________________________________________________________________________________________________00450 INSULA: IS TYPE; SS; INHIBITED ROCKWOOL 01.03.2016_______________________________________________________________________ The item 00450 covers the following services:_______________________________________________________________________ 10 10 M

PIPE .75" THK 25 MM TEMP <=125 DEG C (Meter) _________________________________________________________________



INSULATION TYPE: IS (Insulation for Perosnal safety)SURFACE MATERIAL:SSOPERATING TEMP. RANGE : UPTO 125 DEG C;INSULATION MATERIAL : INHIBITED ROCKWOOL




SIZE: NB 0.75 INCHES , THICKNESS 25 MM _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 15 M





item: PIPES






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1 NO

BL.FLG.ASSY .75" THK 25 MM TEMP<=125DEGC (Number) _________________________________________________________________







_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 1 NO



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________VLV.ASSY O.75" THK 25MM TEMP<=125 DEG C (Number)







_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 4 NO

VLV.ASSY 1.0" THK 25MM TEMP<=125 DEG C (Number) _________________________________________________________________











_____________________________________________________________________________________________________________________________________________________________________________________________________________________00460 MECHANICAL EQUIPMENT 01.03.2016_______________________________________________________________________ The item 00460 covers the following services:_______________________________________________________________________ 10 4.000 MT

MECHANICAL EQUIPMENT (Tonnes) _________________________________________________________________

MECHANICAL EQUIPMENT: _Scope of work: (As per EIL SOR A710-000-55-44-PK-S0R-3010-0 ITEM NO.Q101.00.00)

Transportation of Equipment/ from owners storage point



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________to work site/contractors stores. Assembly ofsubassemblies placing the equipment on foundations,levelling, aligning, fixing of foundation bolts includingchipping and dressing of foundations grouting (incluingsupply and applications of grout material), cleaning andflushing with water, draining and drying with compressedair, erection of inter- connecting piping including someamount of cutting and welding where ever required.Purging the line with air/gas providing manpower forcarrying out trial and start up runs and testing under thesupervision guidance of manufacturer/clients- personneland rectifying defects of any and completing the work inall respects as per drawing, specifications andinstructions of engineer in charge for each equipmentincluding drives and accessories, as listed below :

ITEM: FILTER

DETAILS: Refer PED document no. A710-000-16-44-SOW-4100 for details _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 1 LOT

INSULATION OF FILTER (Lot) _________________________________________________________________

MISCELLANEOUS: _Scope of work: (As per EIL SOR A710-000-55-44-PK-S0R-3010-0 ITEM NO.Q999.99.99V01)

WORK: Insulation of Filters as per PED Document no. A710-000-16-44-SOW-4100



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1 NO

CHAIN PULLEY BLOCK ITEM NO Q999.99.99V04 (Number) _________________________________________________________________




Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________WORK: Design, Manufacture, supply, erection, precommissioning,commissioning, Inspection and testing ofchain pulley blocks as per doc. No. A710-000-16-44-SOW-4100 and other documents attached / refered there in



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 NO



WORK: Design, Manufacture, supply, erection, precommissioning,commissioning, Inspection and testing ofchain pulley blocks as per doc. No. A710-000-16-44-SOW-4100 and other documents attached / refered there in



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 2 NO






_____________________________________________________________________________________________________________________________________________________________________________________________________________________




60 3 NO CHAIN PULLEY BLOCK ITEM NO Q999.99.99V07 (Number)

_________________________________________________________________MISCELLANEOUS: _Scope of work: (As per EIL SOR A710-000-55-44-PK-S0R-3010-0 ITEM NO.Q999.99.99V07)




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 2 NO







_____________________________________________________________________________________________________________________________________________________________________________________________________________________00470 ROTATING EQUPMENT 01.03.2016_______________________________________________________________________ The item 00470 covers the following services:_______________________________________________________________________ 10 14.200 MT

PUMPS WITH DRIVERS (Tonnes) _________________________________________________________________

Rotating Equipment:-

Scope of work: (As per EIL SOR A710-000-55-45-PK-SOR-3010-0 item



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________No:R000.00.00)

Transportation of Rotating Equipment & miscellaneousitems from Owner's storage points to work site /contractor's stores, assembly of sub-assemblies, placingthe equipments on foundations, erection ofinterconnecting piping, levelling, aligning, includingchipping & dressing of foundations, grouting (includingsupply and application of non-shrink grout material), andproviding manpower for testing, rectifying defects if anyand completing the work in all respects as per drawings,Job specification for Mechanical Tender (RotatingEquipment) enclosed and instructions of Engineer-incharge.

item: All Types of Pumps with Drivers (Electric Motor orGeneral Purpose Steam Turbine) and accessories _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 10.000 MT

CENTRIFUGAL COMPRESSOR WITH DRIVER (Tonnes) _________________________________________________________________

Rotating Equipment:-

Scope of work: (As per EIL SOR A710-000-55-45-PK-SOR-3010-0 itemNo:R000.00.00)


item: Centrifugal Compressors with Electric Motor or SteamTurbine Drivers and accessories _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 1.000 M3

EPOXY GROUT (Cubic meter) _________________________________________________________________

Epoxy grout:-

Scope of work: (As per EIL SOR A710-000-55-45-PK-SOR-3010-0 itemNo:R002.01.00)


Work: Epoxy GroutExtra Charges for supplying and applying of Epoxy Grout _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 3.000 MT

CAUSTIC PACKEGE (Tonnes) _________________________________________________________________

Miscelaneous:-

Scope of work: (As per EIL SOR A710-000-55-45-PK-SOR-3010-0 itemNo:R999.99.99V01)





Item: Caustic Package _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00480 STATIC EQUIPMENTS 01.03.2016_______________________________________________________________________ The item 00480 covers the following services:_______________________________________________________________________ 10 54.000 MT

EQUIPMENT WEIGHT 50 TO 100 MT (Tonnes) _________________________________________________________________

STATIC EQUIPMENT:-

Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V151.02.00)

Transportation of reactors, columns, vessels, silencers,heat exchangers (shell and tube, plate fin, plate) andelectric heater etc. from owner's storage point to worksite, assembly of parts, subassemblies, erection at allelevations, aligning, verticality checking, grouting,tightening of foundation bolts, welding of washer onanchor chairs, erection of wooden pillow for coldequipments, stacking of multi-tier exchanger(which arestored in unstacked condition), providing hooks for testring/ test flanges in heat exchangers, installation ofdemister, internal gratings, distributor, pipe davit,installation of mixer/agitator, cleaning and flushing bywater, draining, drying by compressed air, providing alltools, tackles, machinery, consumables, transportationequipment, erection equipment, instruments, labour,ancillary, etc. to complete the work in all respects as perdrawings, equipment detail, specifications andinstructions of the Engineer-in-Charge.

Category: Equipment weighing less than 100 MT but 50 MT and above _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 34.000 MT

EQUIPMENT WEIGHT 30 TO 50 MT (Tonnes)




_________________________________________________________________STATIC EQUIPMENT:-





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 27.000 MT

EQUIPMENT WEIGHT 10 TO 30 MT (Tonnes) _________________________________________________________________

STATIC EQUIPMENT:-


Transportation of reactors, columns, vessels, silencers,heat exchangers (shell and tube, plate fin, plate) andelectric heater etc. from owner's storage point to worksite, assembly of parts, subassemblies, erection at allelevations, aligning, verticality checking, grouting,tightening of foundation bolts, welding of washer onanchor chairs, erection of wooden pillow for coldequipments, stacking of multi-tier exchanger(which are



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________stored in unstacked condition), providing hooks for testring/ test flanges in heat exchangers, installation ofdemister, internal gratings, distributor, pipe davit,installation of mixer/agitator, cleaning and flushing bywater, draining, drying by compressed air, providing alltools, tackles, machinery, consumables, transportationequipment, erection equipment, instruments, labour,ancillary, etc. to complete the work in all respects as perdrawings, equipment detail, specifications andinstructions of the Engineer-in-Charge.



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 54.000 MT

EQUIPMENT WEIGHT LESS THAN 10 MT (Tonnes) _________________________________________________________________

STATIC EQUIPMENT:-



Category: Equipment weighing less than 10 MT _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 10 NO

HYDROTESTING OF SHELL SIDE (Number) _________________________________________________________________

HYDROSTATIC TESTING OF EXCHANGERS:-


HYDROSTATIC TESTING OF EXCHANGERS(shell andtube): Hydrostatic testing of exchangers single tier ormultitier including dismantling and reassembling of pipingconnections wherever required, providing blinds andgaskets on nozzles, piping, water hoses, gauges, valves,test pumps and all other temporary arrangements, labourand materials, drying by hot compressed air as perspecifications and instructions of Engineer-in-Charge. Incase, if leakage is found in gaskets and gaskets arereplaced, then rehydrotest to be done with new gasketafter reassembly. .

(AS PER ERECTION SPECIFICATION ENCLOSED )

Category: Hydrotesting of shell side _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 10 NO

HYDROTESTING OF TUBE SIDE (Number) _________________________________________________________________



HYDROSTATIC TESTING OF EXCHANGERS(shell andtube): Hydrostatic testing of exchangers single tier ormultitier including dismantling and reassembling of pipingconnections wherever required, providing blinds andgaskets on nozzles, piping, water hoses, gauges, valves,test pumps and all other temporary arrangements, labour



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and materials, drying by hot compressed air as perspecifications and instructions of Engineer-in-Charge. Incase, if leakage is found in gaskets and gaskets arereplaced, then rehydrotest to be done with new gasketafter reassembly. .


Category: Hydrotesting of tube side _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 8 NO

RE-HYDROTESTING OF TUBE SIDE (Number) _________________________________________________________________



HYDROSTATIC TESTING OF EXCHANGERS(shell andtube): Hydrostatic testing of exchangers single tier ormultitier including dismantling and reassembling of pipingconnections wherever required, providing blinds andgaskets on nozzles, piping, water hoses, gauges, valves,test pumps and all other temporary arrangements, labourand materials, drying by hot compressed air as perspecifications and instructions of Engineer-in-Charge. Incase, if leakage is found in gaskets and gaskets arereplaced, then rehydrotest to be done with new gasketafter reassembly. .


Category: Rehydrotesting of tube side in floating heat exchangers if leakageis noticed by drop in pressure and no leakage in any of the external joints,hinting at floating head gasket leakage. Shell cover is to be opened and tubeside is tobe filled with water. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 600 NO



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________LETTERING AND STENCILING (Number)

_________________________________________________________________LETTERING AND STENCILING :-


Surface preparation,supply and application of primer andpaint on insulated and uninsulated equipment forlettering, stenciling on vessels, columns, drums, for thepurposes of identification (Equipment Name, EquipmentNumber & Service Description) as per applicable paintingspecification enclosed elsewhere in the tender document,providing scaffolding for all heights, labour, materials,tools, tackles, supervision etc. to complete the work asper specifications and instructions of Engineer-in-Charge. _

ATTRIBUTES:EQUIPMENT NAME, EQUIPMENT NUMBER ANDSERVICE DESCRIPTION

NOTE:

This superscedes the above:Units of the item to be read as 'Per Letter' instead of 'NO'. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 36 M2

HOT INSULATION V252.01.00V01 (Square meter) _________________________________________________________________

HOT INSULATION:-


HOT INSULATION Providing thermal insulationincluding supply of all insulating and anciliary material,

Category: Hydrotesting of shell side weather protective covering, consumablesand other necessary materials, testing of the material as required includingtransportation of the materials to work sites, applying insulation on surfacesas specified, including all preparatory works thereon, all binding, tying,lacing, stitching and/or otherwise securing, providing vapour barrier,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________finishing with plain/corrugated sheet cladding or as specified, providingbolts, rivets, self tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision and completing the work inall respect at all heights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).

Details:Shells of vertical vessels, columns, exchangers, reactors,silencers etc.Surface material: CS/AS.Insulation type :IH(Insulation for heat conservation) & IT (insulation for steam tracers)Insulation Material: Rockwool.Insulation thickness: 25 mm _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 84 M2


HOT INSULATION:-



Category: Hydrotesting of shell side weather protective covering, consumablesand other necessary materials, testing of the material as required includingtransportation of the materials to work sites, applying insulation on surfacesas specified, including all preparatory works thereon, all binding, tying,lacing, stitching and/or otherwise securing, providing vapour barrier,finishing with plain/corrugated sheet cladding or as specified, providingbolts, rivets, self tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision and completing the work inall respect at all heights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).

Details:Shells of vertical vessels, columns, exchangers, reactors,silencers etc.Surface material: CS/AS.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Insulation type :IH(Insulation for heat conservation) & IT (insulation for steam tracers)Insulation Material: Rockwool.Insulation thickness: 30 mm _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 26 M2


HOT INSULATION:-




Details:Shells of vertical vessels, columns, exchangers, reactors,silencers etc.Surface material: CS/AS.Insulation type :IH(Insulation for heat conservation) & IT (insulation for steam tracers)Insulation Material: Rockwool.Insulation thickness: 75 mm _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 30 M2

HOT INSULATION V252.02.00V01 (Square meter)




_________________________________________________________________HOT INSULATION:-




Details:Shells and heads of horizontal vessels, columns,reactors, exchangers,silencers etc and heads of abovementioned vertical equipments. Surfacematerial CS/AS.Surface material: CS/AS.Insulation type :IH(Insulation for heat conservation) & IT (insulation for steam tracers)Insulation Material: Rockwool.Insulation thickness: 25 mm _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 16 M2


HOT INSULATION:-



Category: Hydrotesting of shell side weather protective covering, consumables



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and other necessary materials, testing of the material as required includingtransportation of the materials to work sites, applying insulation on surfacesas specified, including all preparatory works thereon, all binding, tying,lacing, stitching and/or otherwise securing, providing vapour barrier,finishing with plain/corrugated sheet cladding or as specified, providingbolts, rivets, self tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision and completing the work inall respect at all heights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 192 M2


HOT INSULATION:-









_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 433 M2

PAINTING UNINSULA EQUI. TEMP 100-400DEGC (Square meter) _________________________________________________________________

PAINTING (UNINSULATED EQUIPMENT):-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V01)Supply and application of field primers and finish paint onC.S., L.T.C.S. and low alloy steel vessels, columns,exchangers etc., including rubdownand touch up of shop primer wherever required as perattached specification, providing scaffolding for allheights, labour, material, tools and tackles, consumables,supervision etc. to complete the work in all respect as perspecifications, drawings, equipment details for paintingand direction of Engineer in-Charge for all type ofun-insulated equipments. The surface area is as perrespective temperature ranges given below.Note: Surface preparation and first coat of primerapplication shall be provided by equipment supplierDesign Temperature Range From 100 to 400 Degree C.:As per BPCL painting specification: AE-S-5430 (System-7) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 144 M2

PAINTING INSULATED EQUP. TEMP<=200 DEG C (Square meter) _________________________________________________________________

PAINTING (INSULATED EQUIPMENT):-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V02)



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Supply and application of field primers and finish paint onC.S., L.T.C.S. and low alloy steel vessels, columns,exchangers etc., including rubdownand touch up of shop primer wherever required as perattached specification, providing scaffolding for allheights, labour, material, tools and tackles, consumables,supervision etc. to complete the work in all respect as perspecifications, drawings, equipment details for paintingand direction of Engineer in-Charge for all type ofinsulated equipments. The surface area is as perrespective temperature ranges given below.Note: Surface preparation and first coat of primerapplication shall be provided by equipment supplier

Design Temperature Range upto 200 Degree C.:As per BPCL painting specification: AE-S-5430 (System-3) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 189 M2

PAINTING INSULATED EQUP. 200-500 DEG C (Square meter) _________________________________________________________________

PAINTING (INSULATED EQUIPMENT):-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V03)Supply and application of field primers and finish paint onC.S., L.T.C.S. and low alloy steel vessels, columns,exchangers etc., including rubdownand touch up of shop primer wherever required as perattached specification, providing scaffolding for allheights, labour, material, tools and tackles, consumables,supervision etc. to complete the work in all respect as perspecifications, drawings, equipment details for paintingand direction of Engineer in-Charge for all type ofinsulated equipments. The surface area is as perrespective temperature ranges given below.Note: Surface preparation and first coat of primerapplication shall be provided by equipment supplier

Design Temperature Range From 200 to 540 Degree C.:As per BPCL painting specification: AE-S-5430 (System-6) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 1 LS

INSTALLATION OF INTERNALS REACTOR TGTU1 (Lumpsum) _________________________________________________________________

INSTALLATION OF INTERNALS:-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V04)Transportation from storage point to work site,installation ofinternals like grating, bed limited, support plateetc,loading ofpacking / catalyst in the equipments,. andboxing up of the equipment as per drawing and as perdirections of Engineer-in-Charge, providing all tools,tackles, machinery, consumables, transportationequipments, erection equipments, instruments, labouretc. to complete the work in all respect as per instructionsof the Engineer-in-Charge for following equipment.Item no: 129-R-010 (HYDROGENATION REACTOR) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 1 LS

ERECTION OF AIR COOLER TGTU 1 (Lumpsum) _________________________________________________________________

ERECTION OF AIR COOLER:-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V05)Transportation from owner's storage points to erectionsite of following items, erection and installation at variouselevations on supporting structure, carrying out noise &vibration tests (dry runs) for compliance to spec. 6-15-0071under supervision of air cooled heat exchangervendor (cost of supervision by air cooled heatexchanger vendor is not to be included in quoted price)and Engineer-in-charge, complete in all respects. (Referspec.no. A710-000-16-46-SP-0002 for erection details.)Item no: 129-EA-014 (Type:Cover)No.of bundles: 1No. of fans: 3Motors: 3Bearing Blocks: 3 nosBelts & Pulleys: 3 setsVibration switch: 3 nos.Structural Framework: As per vendor drawings



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Note: Supply & fabrication of air cooler structurals suchas column, beams, bracing, plenum chambers, all roundbundle maintenance platform and approaching ladder, airseals, bought out components etc is by Air CoolerVendor. However, erection of all items shall be by bidder.Refer respective drawings A710-129-16-46-DS-3003 ,of item no 129-EA-014 along with A710-000-16-46-DS-3010,3011 & 3012, equipment layout drawing no.A710-129-16-43-0001 for elevation and location of Aircooler. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 190 M2

PAINTING UNINSULA EQUI. STRUCT. (Square meter) _________________________________________________________________

PAINTING ( UNINSULATED EQUIPMENT,STRUCTURE)

Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V06)

Supply and application of field primers and finish paint onC.S., L.T.C.S. and low alloy steel vessels, columns,exchangers, air cooler structure etc., including rubdownand touch up of shop primer wherever required as perattached specification, providing scaffolding for allheights, labour, material, tools and tackles, consumables,supervision etc. to complete the work in all respect as perspecifications, drawings, equipment details for paintingand direction of Engineer in-Charge for all type ofun-insulated equipments. The surface area is as perrespective temperature ranges given below.Note: Surface preparation and first coat of primerapplication shall be provided by equipment supplierDesign Temperature Range upto 100 Degree C.:As per BPCL painting specification: AE-S-5430 (System-1) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 1 LS

INSTALLATION OF INTERNALS REACTOR TGTU2 (Lumpsum) _________________________________________________________________

INSTALLATION OF INTERNALS:-



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V07)

Transportation from storage point to work site, installationofinternals like grating, bed limited, support plateetc,loading ofpacking / catalyst in the equipments,. andboxing up of the equipment as per drawing and as perdirections of Engineer-in-Charge, providing all tools,tackles, machinery, consumables, transportationequipments, erection equipments, instruments, labouretc. to complete the work in all respect as per instructionsof the Engineer-in-Charge for following equipment.

Item no: 134-R-424 (HYDROGENATION REACTOR) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 1 LS

ERECTION OF AIR COOLER TGTU 2 (Lumpsum) _________________________________________________________________

ERECTION OF AIR COOLER:-Scope of work: (As per EIL SOR A710-000-55-46-PK-SOR-3010-0 itemNo:V999.99.99V08)

Transportation from owner's storage points to erection site of followingitems, erection and installation at various elevations on supportingstructure, carrying out noise & vibration tests (dry runs) for compliance tospec. 6-15-0071 under supervision of air cooled heat exchanger vendor cost ofsupervision by air cooled heat exchanger vendor is not to be included inquoted price) and Engineer-in-charge, complete in all respects. (Referspec.no. A710-000-16-46-SP-0002 for erection details.)Item no. 134-EA-432 (Type: Cover)No.of bundles: 2No. of fans: 2Motors: 2Bearing Blocks: 2 nosBelts & Pulleys: 2 setsVibration switch: 2 nos.Structural Framework :As per vendor drawingsNote: Supply & fabrication of air cooler structurals such as column, beams,bracing, plenum chambers, all roundbundle maintenance platform and approaching ladder, air seals, bought outcomponents etc is by Air Cooler



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Vendor. However, erection of all items shall be by bidder.Refer respective drawings A710-134-16-46-DS-3003,of item no. 134-EA-432 along with A710-000-16-46-DS-3010,3011 & 3012, equipment layout drawing no. A710-134-1643-0001for elevation and location of Aircooler. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 1 LS

COLUMN ERECTION (129-C-010/129-C-011) (Lumpsum) _________________________________________________________________

Column Erection (129-C-010/129-C-011):-


Transportation of column sections from owner's storagepoint to work site, assembly of parts, subassemblies,erection of column in two pieces at requiredelevations, assembly of column sections in verticalposition on the foundation, cutting & weld edgepreparation, Visual inspection of the weld edges andconducting MP/DP test , welding of site joint (tentativelocation shown in MDS of column), conducting all NDT,local PWHT etc shall be carried out as per approvedprocedure, aligning, verticality checking, grouting,tightening of foundation bolts, welding of washer onanchor chairs, installation of demister, internal gratings,distributor, pipe davit, cleaning and flushing by water,draining, drying by compressed air, providing all tools,tackles, machinery, consumables, transportationequipment, testing equipment, erection equipment,instruments, labour, ancillary, scaffolding and temporarystructures/platforms/barricading (to be removed bycontractor after completion of work) for site joints etc. tocomplete the work in all respects as per drawings,equipment detail, specifications and instructions of theEngineer-in-Charge. All welding shall be carried out byqualified welders. NDT personnel shall be qualified toASNT level-II.The above site activities shall be carried outunder the supervision of column fabricator.The above is required for stacked columns: 129-C-010/129-C-011 (Refer MDS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________no:A710-129-16-46-DS-3001for details) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 1 LS

COLUMN ERECTION (134-C-410/134-C-411) (Lumpsum) _________________________________________________________________

Column Erection (134-C-410/134-C-411):-


Transportation of column sections from owner's storagepoint to work site, assembly of parts, subassemblies,erection of column in two pieces at requiredelevations, assembly of column sections in verticalposition on the foundation, cutting & weld edgepreparation, Visual inspection of the weld edges andconducting MP/DP test , welding of site joint (tentativelocation shown in MDS of column), conducting all NDT,local PWHT etc shall be carried out as per approvedprocedure, aligning, verticality checking, grouting,tightening of foundation bolts, welding of washer onanchor chairs, installation of demister, internal gratings,distributor, pipe davit, cleaning and flushing by water,draining, drying by compressed air, providing all tools,tackles, machinery, consumables, transportationequipment, testing equipment, erection equipment,instruments, labour, ancillary, scaffolding and temporarystructures/platforms/barricading (to be removed bycontractor after completion of work) for site joints etc. tocomplete the work in all respects as per drawings,equipment detail, specifications and instructions of theEngineer-in-Charge. All welding shall be carried out byqualified welders. NDT personnel shall be qualified toASNT level-II.The above site activities shall be carried outunder the supervision of column fabricator.The above is required for stacked columns: 134-C-410/134-C-411 (Refer MDSno:A710-134-16-46-DS-3001 for details) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 1 LS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________DEGREASING OF AMINE VESSEL TGTU 1 (Lumpsum)

_________________________________________________________________DEGREASING OF AMINE VESSEL:-


Degreasing of Amine vessels, equipments shall becarried out as per specification no. A710-0642-CC-003-G15attached elsewhere in tender.The Work includesproviding all tools,tackles,machinery, consumables,instruments, labour, ancillary etc to complete the work inall respects as per specifications & instructions of theEngineer-in-charge.Item Tag No. 129-C-011 (Amine Absorber) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 1 LS

DEGREASING OF AMINE VESSEL TGTU 2 (Lumpsum) _________________________________________________________________

DEGREASING OF AMINE VESSEL:-


Degreasing of Amine vessels, equipments shall becarried out as per specification no. A710-0642-CC-003-G15attached elsewhere in tender.The Work includesproviding all tools,tackles,machinery, consumables,instruments, labour, ancillary etc to complete the work inall respects as per specifications & instructions of theEngineer-in-charge.Item Tag No. 134-C-411 (Amine Absorber) _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00490 HMT HEATERS MISCELLANEOUS 01.03.2016_______________________________________________________________________




The item 00490 covers the following services:_______________________________________________________________________ 10 90 M2

PAINTING (WITH SUPPLY) H920.99.99V01 (Square meter) _________________________________________________________________

HMT-HEATERS_MiscellaneousScope of work: (As per EIL SOR A710-000-78-41-PK-SOR-3010-000-0 itemNo:H920.99.99V01)

Supply of paints and primer, preparation of surfaces (asspecified below) & application of primers (Other than FirstCoat) and finish paints, identifications, lettering/numbering, colour coding wherever required as directedby Engineer-in-Charge, including rub-down and touch-upof shop primer or scraping of shop primer whereverenquired and providing steel scaffolding for all heights,labour, materials, tools & tackles, consumables,supervision etc. to complete the work in all respects asper specifications, drawings and direction of Engineer-in-Charge as per painting specification No. AE-S-5430.NOTE: Surface preparation and first coat of primerapplication shall be provided by Equipment supplier

For Item No. 134-EW-433 - 50 SQM, For 129-EW-011 -44 SQM, Surface to be Painted - CS, DesignTemperature - 343 Deg C _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 42.000 MT

TRANSPORT. OF QUIP. H920.99.99V02 (Tonnes) _________________________________________________________________


Transportation of following Equipments from Owner'sstorage points to work site/contractor's stores, erection ofthe equipments on foundations at grade, levelling,aligning, grouting (including supply and application ofnon- shrinking grout when necessary) and completing thework in all respects as per drawings, specifications andinstructions of Engineer-in-ChargeFor Item No. 134-EW-433 - 23 MT, For Item No. 129-



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________EW-011 - 19 MT _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 84 M2

PROVINDING INSULATION H920.99.99V03 (Square meter) _________________________________________________________________


Providing thermal insulation including supply of allinsulating and anciliary material, heat resistant paint foils,weather protective covering, consumables and othernecessary materials, testing of the material as requiredincluding transportation of the material to work sites,applying insulation on surfaces as specified, including allpreparatory works theron, all binding, tying, lacing,stitching and / or otherwise securing, finishing with plain /corrugated sheet cladding or as specified, providinginspection windows etc., providing necessary scaffolding,all tools and tackles, equipment, apparatus etc. labourand supervision and completing the work in all respect atall heights as per drawings and specifications to thesatisfaction of Engineer-in-Charge. (Applicablespecification 6-44-0002)Insulation Thickness 30mm, For Item No. 134-EW-433-31 SQM and For Item No. 129-EW-011- 28 SQM.Insulation Thickness 75mm, For Item No. 134-EW-433 -14 SQM and For Item No. 129-EW-011 - 11 SQM.Surface to be insulated - CS, Type of Insulation-Rockwool

_________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00500 ARCHITECTURAL WORK 30.04.2016_______________________________________________________________________ The item 00500 covers the following services:_______________________________________________________________________ 10 20 M2



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Cement supplied by contractor (Square meter)

_________________________________________________________________AS PER EIL SOR 1_A710-000-16-49-PK-SOR-3010-0

ARCHITECTURE_FLOOR FINISHING _Providing and laying average 25mm cement concreteflooring in panels consisting of base course of M-15grade cement concrete (6mm down size stoneaggregate) laid over sub-base of cement concrete andfinishing with a layer of floating coat of neat cement slurry@ 2.75kg. of cement per Sq.M. of area including cleaningthe sub-base surface, applying neat cement slurry @ 2.75kg of cement per Sq.M. of area over the sub- base toreceive the base course, compacting, tamping, trowelling,finishing, curing, providing,shuttering to the edges etc. allcomplete. _CEMENT SUPPLIED BY THE CONTRACTOR AT THEIRCOST _

Providing and laying average 25mm cement concreteflooring in panels consisting of base course of M-15grade cement concrete (6mm down size stoneaggregate) laid over sub-base of cement concrete andfinishing with a layer of floating coat of neat cement slurry@ 2.75kg. of cement per Sq.M. of area including cleaningthe sub-base surface, applying neat cement slurry @ 2.75kg of cement per Sq.M. of area over the sub- base toreceive the base course, compacting, tamping, trowelling,finishing, curing, providing,shuttering to the edges etc. allcomplete. _________________________________________________________________CEMENT SUPPLIED BY THE CONTRACTOR AT THEIRCOST _Providing and laying average 50mm thick heavy dutyflooring in panels consisting of base course of 35mmthick cement concrete (1 cement : 1.5 coarse sand : 3.5stone aggregates of 10mm to 6mm size by volume) laidover sub-base and 15mm thick finishing layer consistingof cement and integral hardening compound mixed inratio of 4 cement :1 hardenar (by weight) :2 stoneagrgregates of 6mm and down size laid integral with basecourse and finished smooth including cleaning the subbasesurface, applying neat cement slurry @2.75 Kg ofcement per Sq.M of area over sub-base to receive thebase course, levelling, tamping, trowelling, finishing,curing, providing shuttering to the edges etc. all complete. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 550 M2

Cement supplied by contractor (Square meter) _________________________________________________________________

CEMENT SUPPLIED BY THE CONTRACTOR AT THEIRCOST. _Providing and laying 125mm high cement plaster skirting with 1:3 cement mortar(1 cement : 3 coarse sand byvolume) finished with a floating coat of neat cement slurry@ 2.75kg. of cement per Sq.M of area including roundingof junctions with floor, preparing the wall surface, makingrecess in the wall, finishing, curing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 75 RM

18mm thick. cement supplied by contracto (RUNNING METER) _________________________________________________________________

CEMENT SUPPLIED BY THECONTRACTOR AT THEIR COST. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 250 RM

12mm thick. cement supplied by contracto (RUNNING METER) _________________________________________________________________

CEMENT SUPPLIED BY THECONTACTOR AT THEIR COST. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 5 RM

6mm thick cement supplied by contractor (RUNNING METER) _________________________________________________________________

6mm thick. CEMENT SUPPLIED BY THECONTRACTOR AT THEIR COST. _ _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 30 RM

P.V.C. panel dividers ( 3mm x 20mm size. (RUNNING METER) _________________________________________________________________

Providing and fixing panel dividers in flooring/dadoincluding maintaining slope, line, chipping of the unevenbase, grinding etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 900 RM

P.V.C. panel dividers ( 3mm x 40mm size. (RUNNING METER) _________________________________________________________________

Providing and fixing panel dividers in flooring/dadoincluding maintaining slope, line, chipping of the unevenbase, grinding etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 80 M2

25mm thick in floor landing cement suppl (Square meter) _________________________________________________________________

Providing and laying machine cut chissel dressed kotastone slab of approved shade in floor tread, landing, riser,skirting, dado over and including a bed of cement mortarincluding preparing the base surface, applying neatcement slurry @ 2.75 Kg of cement per Sq.M of area toreceive the mortar, providing neat cement slurry @ 4.4kg.of cement /Sq.M of area over the mortar bed, jointingeach slab with neat cement paste/ grouting white cementand pigment ( conforming to IS : 2114, Table-1, matchingthe shade of slabs), machine cutting of the slab edgessquare, true & plumb finishing, grinding, polishing,finishing etc. all complete.

25mm thick kota stone slab (with tolerance +_2mm forthickness, +_2mm for length/ breadth) in floor, landingtread over average 15mm thick cement mortar 1:4(1Cement : 4 coarse sand byvolume). CEMENT



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SUPPLIED BY THE CONTRACTOR AT THEIR COST. _________________________________________________________________Providing and laying machine cut chissel dressed kotastone slab of approved shade in floor tread, landing, riser,skirting, dado over and including a bed of cement mortarincluding preparing the base surface, applying neatcement slurry @ 2.75 Kg of cement per Sq.M of area toreceive the mortar, providing neat cement slurry @ 4.4kg.of cement /Sq.M of area over the mortar bed, jointingeach slab with neat cement paste/ grouting white cementand pigment ( conforming to IS : 2114, Table-1, matchingthe shade of slabs), machine cutting of the slab edgessquare, true & plumb finishing, grinding, polishing,finishing etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 15 M2

18mm thick in riser, dado cement supplie (Square meter) _________________________________________________________________

18mm thick kota stone slab in riser, dado, skirting overaverage12mm thick cement mortar1:3(1 cement:3 coarsesand by volume). CEMENT SUPPLIED BY THECONTRACTOR AT THEIR COST. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 100 RM

Extra for providing round nosing (RUNNING METER) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 26 M2

Aluminium glazed doors with cup pivots (Square meter) _________________________________________________________________

STEEL/ ALUMINIUM/ GLAZED/ FULLY GLASS/ PVCETC. DOORS, WINDOWS AND VENTILATORS

Supplying and fixing fully glazed anodized ( 25 micron) /electrostatic powder coated (25 micron, approved shade)aluminium doors / windows /partitions /ventilators



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including frame & shutter with approved make extrudedtubular aluminium sections and glass fixed with rubberlining and anodized/powder coated aluminium beadingincluding fixing the frame to masonry/RCC by countersunk 100mm long brass screw and dash fastener to M-20grade concrete in minimum 150mm x 150mm x 50mmsized block (for brick masonry only)/RCC, finishing,making good of any damaged work etc. all complete

Aluminium glazed doors with cup pivots of aluminiumalloy to IS designation NS-4 of IS-737 and IS designationof A-5-M of IS- 617, Heavy duty hydraulically operated,adjustable floor mounted door closer conforming toIS:6315 (single/double action), 250mm and 150mm long,10mm dia anodized. Aluminium tower bolts as per IS :204 one each for each shutter, brass body mortice lock (4levers, as per IS : 2209) with aluminium handle on bothsides, etc. all complete for each shutter, with approvedshade electrostatically powder coated aluminium sections and 5mm thk.toughened glass as per IS:5437. _________________________________________________________________STEEL/ ALUMINIUM/ GLAZED/ FULLY GLASS/ PVCETC. DOORS, WINDOWS AND VENTILATORSSupplying and fixing fully glazed anodized ( 25 micron) /electrostatic powder coated (25 micron, approved shade)aluminium doors / windows /partitions /ventilatorsincluding frame & shutter with approved make extrudedtubular aluminium sections and glass fixed with rubberlining and anodized/powder coated aluminium beadingincluding fixing the frame to masonry/RCC by countersunk 100mm long brass screw and dash fastener to M-20grade concrete in minimum 150mm x 150mm x 50mmsized block (for brick masonry only)/RCC, finishing,making good of any damaged work etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 15 M2

Aluminium glazed window/ventilator (Square meter) _________________________________________________________________

Aluminium glazed window/ventilator with approved makesections, friction hinges, cast aluminium handle, etc. allcomplete with approved shade electrostatically powdercoated aluminium sections and 5mm thk. toughenedglass as per IS:5437, Openable type. _

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 34 M2

Al. glazed window/ventilator-Fixed type (Square meter) _________________________________________________________________

Aluminium glazed window/ventilator with approved makesections, friction hinges, cast aluminium handle, etc. allcomplete with approved shade electrostatically powdercoated aluminium sections and 5mm thk. toughenedglass as per IS:5437,Fixed type _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 350 M2

Plaster average 15mm thk 1:4 cement supp (Square meter) _________________________________________________________________

PLASTERING & POINTING _Providing plain cement plaster in cement mortar (1cement:4/6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; alsoincluding providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _

Ordinary plain cement plaster Average 15mm thick 1:4 (1cement : 4 sand). Cement supplied by the Contractor attheir cost. _________________________________________________________________PLASTERING & POINTING _Providing plain cement plaster in cement mortar (1cement:4/6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; alsoincluding providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




150 1,500 M2 Plaster average 12mm thk 1:4 cement supp (Square meter)

_________________________________________________________________PLASTERING & POINTING _Providing plain cement plaster in cement mortar (1cement:4/6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; alsoincluding providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _

Ordinary plain cement plaster Average 12mm thick 1:4 (1cement : 4 sand). Cement supplied by the Contractor attheir cost. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 550 M2

Plaster average 6mm thk 1:4 cement suppl (Square meter) _________________________________________________________________


Ordinary plain cement plaster Average 6 mm thick 1:4 (1cement : 4 sand). Cement supplied by the Contractor attheir cost. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 1,200 M2

Plaster with WP 18mm thk 1:6 cement supl (Square meter) _________________________________________________________________

PLASTERING & POINTING _Providing plain cement plaster in cement mortar (1cement:4/6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; also



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _

Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight, Average 18mmthick 1:6 (1 cement : 6 sand) Cement supplied by theContractor at their cost. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 200 M2

Plaster with WP 6mm thk 1:4 cement supli (Square meter) _________________________________________________________________


Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight. Average 6mmthick 1:4 (1 cement : 4 sand) Average 6mm thick 1:4 (1cement : 4 sand). Cement supplied by the Contractor attheir cost. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 50 RM

Providing 20mm x 10mm Grooves (RUNNING METER) _________________________________________________________________

PLASTERING & POINTING _Providing plain cement plaster in cement mortar (1cement:4/6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; also



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _

Providing 20mm x 10mm Grooves in plastering in perfectstraight line, plumb and uniform size throughout includingfinishing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 30.000 M3

ROOFING TREATMENT (Cubic meter) _________________________________________________________________

Providing and laying cement concrete (1 cement : 2coarse sand : 4 aggregate) over concrete surfaces, laid toslope at all heights including, finishing, curing, tampingetc. all _Cement supplied by the Contractor at their cost.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 300 M2

Cement supplied by the contractor at the (Square meter) _________________________________________________________________

Providing and laying 4mm thick A.P.P (atacticpolypropelene) modified reinforced bituminouswaterproofing membrane over terrace and parapetincluding cleaning and preperation of the surfaceconsisting of making good all the cracks and damages,filling potholes/ depressions, removing weak foamconcrete/ plaster and refilling with same whereverrequired thus preparing smooth surface of the terrace;providing and applying one coat of cold applied bitumenbased primer @ 0.2 to 0.4 litre per sq. mtr.; laying themembrane by torch welding over primer, providing100mm overlaps and appropriately pressing the membrane to remove any entrappedair, including fixingon parapet after providing 10mm x 20mm continuousgroove in parapet for terminating the membrane andfilling the groove with polyurethane sealant and continuing



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________this treatment at rain water outlet points; providingfinishing protective layer of 35 mm thk. P.C.C. (1:2:4) inpanels of maximum size 1200mm x 1200mm chequeredfinish with 24 SWG chicken wiremesh interposed inbetween finished smooth with joints between panelssealed with suitable polyurethane sealant; providing filletsof 75 mm radius with P.C.C. (1:2:4) at junctions ofhorizontal and vertical surfaces finished smooth;providing 450mm x 450mm khuras (rain water collectingpits) in 1:2:4 cement concrete at all outlets, levelled downby min. 25mm, finishing, curing etc. all complete as perapproved manufacturer's standard specifications andrecommendations._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 1,100 M2

P/A two coats of plastic emulsion paint (Square meter) _________________________________________________________________

Providing and applying two or more coats (to give asmooth and even shade) of premium plastic emulsionpaint conforming to IS:5411 of approved make and shadeincluding cleaning and preperation of surface consistingof application of Plaster of Paris punning over entiresurface, filling all holes and depressions with plaster ofParis, applying a coat of cement primer, two or morecoats of oil based putty (as per manufacturer'srecommendations to give a paste like putty),sandpapering etc. all complete._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 1,300 M2

Oil bound distempering (Square meter) _________________________________________________________________

Providing and applying two coats of distempering ofapproved quality and shade including cleaning andpreparation of surfaces etc. all complete.Oil bound distempering conforming to IS : 428 includingpreparation of surfaces (making good of uneven plasterwith plaster of paris mixed with water, sand papering),providing a priming coat of alkali resistant/ distemperprimer. _ _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 3,000 M2

Premium Acry. ext. paint with silicon ad (Square meter) _________________________________________________________________

Providing and applying/ finishing the walls/ RCC surfaceswith Premium Acrylic smooth exterior paint with siliconadditives with low VOC (Volatile Organic Compound)content (Snowcryl-XT of 'Snowcem India Ltd. or approvedequivalent) of required shades on new work applied intwo or more coats at the rate of 1.43 ltr/ 10 sq.m over andincluding base coat of waterproof cement paint (ofSnowcem Plus or approved equivalent) includingcleaning, preparation of surfaces, curing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 85 RM

160mm dia embedded PVC rain water pipe (RUNNING METER) _________________________________________________________________

ROOFING _Providing and fixing rain water pipes with M.S. holderclamps including fixing/embedding intomasonry/concrete, providing connections like shoes,vents, specials, bends etc. fixing in perfect plumb etc. allcomplete. _160mm dia O.D. Size. embedded PVC rain water pipejointed with bonding solution of approved quality andmake with pressure rating of 4kg/cm2 including clamps,connections etc. all as per approved manufacturer'sdetails _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 180 M2

P/F Tray type Aluminium plank false ceil (Square meter) _________________________________________________________________

FALSE CEILING, FALSE FLOORING, UNDERDECKINSULATION, PARTITIONING _Providing and fixing Tray type Aluminium plank false



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________ceiling consisting of 254/305mm x 1264mm or 600mm x600mm size Aluminium planks (profiled for positiveengagement into clip-in profiles and demounting of individual planks)manufactured out of 0.7mm thk.Aluminium alloy 3105/3005/5052 (as per ASTM 209M)with stove enamelled (coil coated) finish in approvedcolour and suspension system consisting of 0.5mm thk.40mm x 20mm galvanised steel clip-in main runnerprofiles (@ 1264mm or 600mm as per plank size)supported by and including 0.5mm thk. 25mm x 16mm GIsuspension angle,1mm thk. 25mm x 34mm x 76mmCRCA zinc plated steel ceiling brackets (@ max.1264mm c/c or 600mm as per profile) fixed to roofslab/beam,0.5mm thk. 40mm wide, 105mm high G.I. holdon clamps slotted for level adjustment, perimeter anglesincluding providing slit openings for fixing supply/return airgrill, lighting fixtures, AC ducts etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 180 M2

P/F rigid Ployisocyanurate foam (PIR) sl (Square meter) _________________________________________________________________

Providing and fixing in position underdeck insulationconsisting of rigid Polyisocyanurate foam (PIR) slabs ofsize 1000 x 500mm and thickness of 30mm (covered onone side with glass fibre tissue/ Aluminium foil having50mm overlap) conforming to IS:12436 having density notless than 32 kg./ Cu. M., thermal conductivity (K- value)not more than 0.023 w/mk measured at 10 deg. C;classified as 'Class I' for surface spread of flame as perBS 476, part 7; fixed to R.C.C. slab by hot blow gradebitumen of 85/25 grade or cold adhesive CPRX appliedover a coat of bituminous primer @ 0.5 Litres/ Sq.M.applied to bare R.C.C. surface and to the two surface ofeach PIR panel and pressed in position (while thebitumen is still tacky) with the help of G.I. screws (No. 8 x75mm long) fixed into rawl plugs (holes in R.C.C. for therawl plugs shall be drilled prior to applying coat ofbituminous primer) of size 8 x 25mm inserted (5 nos. foreach slab- One each at 4 corners and one at center) andG.I washers 25mm dia; including covering the overlapswith approved quality sealing compound (MAS-94 orequivalent); chicken wire mesh 24G x 19mm shall then be fixed to G.I screwsand tightened with lacing wire;



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including preparation of surface consisting of cleaningR.C.C surface of all dust, dirt and loose particles by wirebrushing; etc. all complete as per approvedmanufacturer's standard specifications andrecommendations. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 10 M2

MISC ITEMS-Plinth protection of PCC (1:3 (Square meter) _________________________________________________________________

Providing and laying plinth protection with Bldg. drain asper EIL STD. No. 7-75-0065 consisting of _Plinth protection of PCC (1:3:6) laid over rammed earth toslope and trowel finished. Cement supplied by theContractor at their cost. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 2 RM

P/F 50mm dia GI pipe spouts to slope (RUNNING METER) _________________________________________________________________

Providing and fixing in position 50mm dia GI pipe spoutsto slope for drainage of canopy, chajja etc., includingpuncturing the masonry /RCC and grouting with M-15grade concrete, finishing etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 12 M2

P/F 2000mm high transformer gates (Square meter) _________________________________________________________________

Providing and fixing 2000mm high transformer gatesconsisting of 50mm x 50mm x 6mm M.S. angle framebraced with 50mm x 50mm x 6mm thick M.S. Teestiffeners, 50mm x 50mm x 8mm gauge welded meshfixed to the frame by 25mm x 3mm M.S. flat beadingincluding fixing the gate to masonry/RCC by M.S. hingearrangement (65mm x 65mmx 6mm M.S. angles, bolt,washers) and M.S. hold fast grouted with M-15 gradeconcrete, providing and fixing M.S. pivot arrangement,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________MS aldrop, M.S. tower bolts, double coat of approvedshade and make sythetic enamel paint over a coat ofapproved quality red oxide zinc chromate primer, finishingetc. all complete as per EIL-STD No. 7-75-0051, 0052ensuring smooth operation of the gate. _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 42 RM

P/F M.S. Pipe handrail (RUNNING METER) _________________________________________________________________

Providing and fixing hand railing up to 1000mm high above finished floor levelover stair and landing consistingof one 25mm square M.S. baluster embedded or fixed tofloor/steps by 6mm thk. x 20mm wide M.S. clampsanchored into floor/ steps in floor and each step groutedwith M-15 grade concrete in cut out of 50mm x 50mm x100mm size block, teakwood moulded/ M.S. pipe handrailfixed on baluster, 40mm x 40mm x 6mm M.S. flat shoewelded at the bottom of baluster, including painting thebalusters, M.S. surfaces with double coating of approvedshade and make synthetic enamel paint over a coat ofapproved quality red oxide zinc chromate primer coat,finishing etc. all complete. (Only length of top handrailshall be considered for payment, not the cumulativelength of individual members).32 mm dia N.B. (medium) M.S. pipe handrail welded tobaluster and painted with double coating of syntheticenamel paint over priming coat as per EIL STD NO. 7-75-0036.Miscellan _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 24 M2

Firerated SINGLE SHUTTER Steel door- pan (Square meter) _________________________________________________________________

Providing and fixing 2 hours fire rated, single shutter steeldoors consisting of steel door frame, shutter, insulationand hardware such as hinges, panic bar, locks/ trim panicbar, door closer, motice lock, handle, door stopper, fixingwith masonry, partition etc. all complete as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specification and approved Manufacturer's details. _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00510 GENERAL CIVIL WORKS 30.04.2016_______________________________________________________________________ The item 00510 covers the following services:_______________________________________________________________________ 10 100 M2

S/L100 mm thick WBM with 90-45 agggregat (Square meter) _________________________________________________________________

AS PER EIL SOR NO. 6_A710-000-55-47-PK-SOR-3010-0

ROADS & FLEXIBLE PAVEMENT (UPTO WBM LAYER)(SPEC. NO.6-65-0018)

Supplying and laying of stone aggregate of 90mm downto 45mm size for SUB-BASE COURSE tough, sound,clean and durable including cost of stone aggregate, allroyalties, taxes, handling, transportation to site, unloadingthe same by the side of road with all leads and lifts,spreading and laying to form water bound macadam inone layer of 100mm compacted thickness to propergrade, camber and level, filling voids with screenings andbinding the surface with binding material of plasticityindex upto 6% including cost of supply of screening andbinding material, consolidating with power driven roadroller, watering, with all leads and lifts includingpreparation of camber below first layer etc. complete asper drawings, specifications and directions of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 70 M2

S/L 75mm thick WBM with 63-45 aggregates (Square meter) _________________________________________________________________

Supplying and laying of stone aggregate of 63mm downto 45mm size for WBM layer Base Course, tough, sound,clean and durable including cost of stone aggregate, allroyalties, taxes, handling, transportation to site, unloading



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________the same by the side of road with all leads and lifts,spreading and laying to form water bound macadam inone layer of 75mm compacted thickness to proper grade,camber and level, filling voids with screenings andbinding material of plasticity index upto 6%, including costof supply of screening and binding material, consolidatingwith power driven road roller, watering, with all leads andlifts etc. complete as per drawings, specifications anddirections of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 50 M2

Repair of pot holes including supply of (Square meter) _________________________________________________________________

as per EIL SOR 6_a710-000-55-47-pk-sor-3010-0item no.C007.32.00

Providing all materials and labour for making good potholes for all depths in roads including surface preparationrectification of damaged portions of 1st layer of WBM,base course, sub-base course, filling in ruts anddepressions, etc. breaking adjoining portion of roads, ifrequired, cleaning the surfaces, providing the layers asper the specifications of roads (WBM layers to properthickness, including compacting, watering,

filling voids with screenings and binding material ofplasticity index upto 6%, including cost of supply ofscreening and binding material etc. complete as perspecification of road work). (Any damaged surface ofroad upto 3.0 Sq.M of area shall be considered as potholes. Damage portion more than 3.0 Sq.M shall be paidunder general road work respective items).

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 100 M2

S/L WBM LAYERS 75 mm thick (Square meter) _________________________________________________________________

as per EIL SOR 6_a710-000-55-47-pk-sor-3010-0ITEM NO.C007.34.00




Supplying and laying WBM layers for roadberms/shoulders, of stone aggregate of 63mm down to45mm size for WBM layer Base Course, tough, sound,clean and durable including cost of stone aggregate, allroyalties, taxes, handling, transportation to site, unloadingthe same by the side of road with all leads and lifts,spreading and laying to form water bound macadam inone layer of 75 mm compacted thickness to

proper grade, camber and level, filling voids withscreenings and binding material of plasticity index upto6%, including cost of supply of screening and bindingmaterial, consolidating with road roller, watering, with allleads and lifts etc. complete as per drawings,specifications and directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 90.000 M3

For RCC of M-35 grade concrete (Cubic meter) _________________________________________________________________

Providing and laying Reinforced Cement Concrete with20mm and down size graded crushed stone aggregatesin flooring, pavements etc. including leaving pockets, ifnecessary, making recess/drains, laying in alternatepanels, etc. for all depths including shuttering, tamping,curing, etc. as specified in any shape, thickness, positionand finishing the top surface smooth etc. all complete asper drawings, specifications and directions of Engineer-in-Charge. _For RCC of M-35 grade concrete(all materials including cement but excluding cost ofproviding & fixing reinforcement and joint sealing shall besupplied by the contractor). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 26 M

Type-I pavement (including supply of M (Meter)




_________________________________________________________________Providing 20mm wide Expansion Joints in pavementslabs as per std. No.7-65-0404 including cleaning thejoints of all loose material, filling with 20mm thickimpregnated fibre boards for the full depth of slab exceptfor 25mm depth from top and sealing the top 25mm wthapproved Joint Sealing Compound as per IS:1834 Type-Betc. all complete as per drawings, specifications anddirections of Engineer-in-Charge. _For type-I pavement (Upto and inclusive of thickness of200 mm). (Including providing and laying MS dowel bar,painting as required, GI pipe and cap and cotton waste). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 110 M

type-II pavement (Meter) _________________________________________________________________

Providing 20mm wide Expansion Joints in pavementslabs as per std. No.7-65-0404 including cleaning thejoints of all loose material, filling with 20mm thickimpregnated fibre boards for the full depth of slab exceptfor 25mm depth from top and sealing the top 25mm wthapproved Joint Sealing Compound as per IS:1834 Type-Betc. all complete as per drawings, specifications anddirections of Engineer-in-Charge.For type-II pavement (Upto and inclusive of thickness of150 mm). _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 38.000 M3

P/L PCC 1:5:10 in Pavement (Cubic meter) _________________________________________________________________

ITEM NO-:C008.11.00Providing and laying plain cement concrete of NominalMix 1:5:10 with 20mm and down size graded stoneaggregates for all depths below and upto plinth level

below Pavement or any other place, including tamping,ramming vibrating, curing all as specified in any shape,position, thickness and finishing the top surface rough or



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________smooth, etc. all complete as per drawings, specificationsand direction of Engineer-in-Charge. (Including the cost ofshuttering). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 67 M

Const joints 20mm wide x 25mm deep (Meter) _________________________________________________________________

Providing joints in pavements and around foundations asper std no.7-65-404 including cleaning the joints of allloose materials and sealing with sealing compoundconforming to IS:1834 Type B as required etc. completeas per drawings, specifications and directions of Engineer-in-Charge for;Construction joints 20mm wide x 25mm deep. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 26 M

Sealing Joints 20mm x 200 mm (Meter) _________________________________________________________________

Sealing joint around pedestal and column etc. 20mmwide x 200 mm deep including filling with 20mm thickimpregnated fire board for the full depth of slab except for25mm depth from top and sealing the top 25mm withapproved joint sealing compound as per IS:1834 Type-B. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 120 M

Sealing Joints 20mm x 150 mm (Meter) _________________________________________________________________

Sealing joint around pedestal and column etc. 20mmwide x 150 mm deep including filling with 20mm thickimpregnated fire board for the full depth of slab except for25mm depth from top and sealing the top 25mm withapproved joint sealing compound as per IS:1834 Type-B. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 10 M

Pipe Class - NP3 , Dia (internal) - 200 (Meter) _________________________________________________________________

RCC PIPE CULVERTS & ELECTRICAL ROADCROSSINGS ETC. SPEC. NO.6-65-0021) _Supplying and laying in position RCC pipes with collarsconforming to IS:458 for pipe culverts, cable crossingsetc. including cutting the pipe if necessary, lowering,laying in position to proper levels, slopes etc. caulking thejoints with spun yarn soaked in neat cement slurry andfinishing with cement mortar 1:2 (1 cement : 2 sand)curing etc. all complete as per drawings, specificationsand directions of Engineer-in-Charge. For following Classand Internal PIPE DIA (MM)( Pipe Class - NP3 , Dia (internal) - 200 mm ) _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 6 EA

S/F cable crossing indicator (each) _________________________________________________________________

Supplying and fixing in the encasement concrete, cablecrossing indicator, made out of 4mm thick MS circular ofdia. 150mm welded to 16mm dia. MS Rod ofapproximately 1.0M length, painted with 2 coats ofapproved enamel paint over a coat of red oxide primeretc. complete. (All materials in contractor's scope ofsupply). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 50 M2

S/L gravel/ crush stone 27-37MM (Square meter) _________________________________________________________________

Supply and laying of gravel/ crush stone ofsize rangingbetween 27mm to 37mm in compacted thickness of100mm in valve pit, open area within the unit battery limitor at any other place as directed, etc. complete as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________drawings, specifications and direction of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 65.000 KG

S/E funnels, cleanout, flame arrester (Kilogram) _________________________________________________________________

Supply of all materials, fabrication and erection inposition, funnels, clean outs, plugs, flame arrester in ventpipe etc. including the cost of cutting, bolting/welding,painting with two coats of chlorinated rubber zincphosphate primer @ 40ì DFT per coat and finish paintingconsisting of 2 coats of chlorinated rubber paint @ 40ìDFT per coat, etc. complete as per drawings,specifications and direction of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 5 EA

safety shower and eyewash units (each) _________________________________________________________________

Supply and installation of combined stainless steel safetyshower and eyewash units as per spec. no.6-66-0038,including providing and fixing of necessary foundationbolts in foundations/ pavement etc. complete. Each safetyshower shall have proper sign board with florescentletters showing their location, all complete as perspecification, drawings and direction of Engineer-incharge _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 10.000 M3

Supply of borrow earth for filling in mi (Cubic meter) _________________________________________________________________

Supply of borrow earth for filling in micrograding, Borrowareas shall be arranged by contractor on his own fromanywhere outside plant complex limit. The rate quoted

shall include all royalties, right of way etc. all complete asper specifications, drawings and directions of Engineer-incharge. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 1 EA

Nominal Dia-10 INCH,Pip. mat. classA494A (each) _________________________________________________________________

FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)45 Degree Mitre Bend for following Nominal Sizes andPiping material class

( Nominal Dia - 10 INCH, Piping Material Class - A94A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 1 EA


FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)45 Degree Mitre Bend for following Nominal Sizes andPiping material class _

( Nominal Dia - 8 INCH, Piping Material Class - A94A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 1 EA


FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)45 Degree Mitre Bend for following Nominal Sizes andPiping material class _Nominal Dia - 8 INCH, Piping Material Class - A93A )

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 6 EA


FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)22-1/2 - Degree Mitre Bends for following Nominal Sizesand Piping Material Class

Nominal Dia - 8 INCH, Piping Material Class - A93A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 6 EA

Nominal Dia-6INCH,Pip. mat. classA493A (each) _________________________________________________________________

FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)

22-1/2 - Degree Mitre Bends for following Nominal Sizesand Piping Material Class _Nominal Dia - 6 INCH, Piping Material Class - A93A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




230 7 EA Nominal Dia-10INCH,Pip. mat. classA494A (each)

_________________________________________________________________FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)

22-1/2 - Degree Mitre Bends for following Nominal Sizesand Piping Material Class _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 9 EA


FABRICATION OF PIPING SPECIALS (SPEC. NO.6-65-0030 and 6-44-0012) : Fabrication of specials from Pipesincluding transportation of materials from Owner'sstorage point to Contractor's workshop/worksite,preparation & getting approval of cutting diagrams, cuttingof pipes/plates according to approved cutting diagrams,edge preparation, welding, shop testing(including DP/MP)and inspection as per specifications etc. Supply of allnecessary equipment, consumables, labour etc.,transportation of finished specials from Contractor'sworkshop/worksite to the Owner's storage point etc.complete as per specifications, drawings and instructionsof Engineer-in-Charge including return of all unused /scrap pipes and plates to Owner's storage points (Pipeshall be supplied by owner as free issue material)

22-1/2 - Degree Mitre Bends for following Nominal Sizesand Piping Material Class _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 6 EA

Dia -2 Inch, PipingMaterial Class-J2A (each) _________________________________________________________________

Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material class

Dia - 2 Inch, Piping Material Class - J2A

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 3 EA

Dia -3 Inch, PipingMaterial Class-J2A (each) _________________________________________________________________

Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material class

Dia - 3 Inch, Piping Material Class - J2A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 6 EA

Dia -1.5 Inch, PipingMaterial Class-J2A (each) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material class( Dia - 1.5 Inch, Piping Material Class - J2A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 4 EA

Dia -4 Inch, PipingMaterial Class-A33Y (each) _________________________________________________________________

Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material class( Dia - 4 Inch, Piping Material Class - A33Y _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 3 EA

Dia -6Inch, PipingMaterial Class-A33Y (each) _________________________________________________________________

Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material classDia - 6 Inch, Piping Material Class - A33Y _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 6 EA

Dia -7.5Inch, PipingMaterial Class-A33Y (each) _________________________________________________________________

Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material classDia - .75 Inch, Piping Material Class - A33Y _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 10 EA


Supply and installation of valve assembly consisting ofvalve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts &bolts per valve assembly in position including fixing ofnuts, bolts, gaskets, washers etc. complete as perdrawings, specifications and directions of Engineer-in-Charge.Gate valve assembly for following nominal sizes andpiping material classDia - 1 Inch, Piping Material Class - A33Y ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 3 EA


Supply, Fabrication and installation of strainers as perdrawings, including fabrication of matching flanges etc.complete as per specifications and directions ofEngineer-in-Charge.Y-type strainers for following nominal size and pipingmaterial classDia - 6 Inch, Piping Material Class - A33Y

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 1 EA

Dia -4 Inch, PipingMaterial Class-A33Y (each) _________________________________________________________________

Supply, Fabrication and installation of strainers as perdrawings, including fabrication of matching flanges etc.complete as per specifications and directions ofEngineer-in-Charge.Y-type strainers for following nominal size and pipingmaterial classDia - 4 Inch, Piping Material Class - A33Y

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 16 EA

Suplying & fixing in position heavy duty (each) _________________________________________________________________

MiscellaneousSupplying and fixing in position heavy duty CI manholeframe with lugs and cover conforming to IS- 1726including breaking of brick masonry or concrete surfaceto receive frame with lugs and making good the samewith CM 1:3 including applying two coats of anticorrosivepaint inclusive of all labours and materials etc. complete.Circular size 820 mm dia Heavy duty of grade HD-20. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 4.000 MT

HDG steel gratings (Tonnes) _________________________________________________________________

Supply of all materials, fabrication and erection in positionHDG steel gratings for catch pits, drains etc. including thecost of cutting, bolting/welding where necessary, includinghot dip galvanizing, etc. all complete as per drawings,specifications and direction of Engineer-in-Charge.(Supply of all materials in Contractor's scope) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 15 NO

double headed landing valves, Type A (Number) _________________________________________________________________

Supply, Installation, testing and commissioning of doubleheaded landing valves, Type A as per IS:5290 andconfirming to data sheet, specification including supply ofthe entire landing valve assembly consisting of pipes,hydrant valve, flanges, caps etc. as per drawingsincluding painting, transporting the equipment to worksite,welding, supply and fixing of nuts, bolts, washers andgaskets etc. needed for fixing the equipment withmatching flange etc. complete as per drawings,specifications and directions of Engineer-In-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 10 M

S/L UG RCC SEWER PIPE 400 mm dia Class P (Meter) _________________________________________________________________

Supplying & laying underground RCC pipes sewers withsocket and spigot ends conforming to IS:458, of approvedmake, to proper grade and alignment, including earthworkin excavation in all types of soil including soft rocks forpipe trenches, pits, manholes, etc. including dewatering,shoring and strutting if necessary, dressing of sides,leveling, grading and ramming of bottoms, cutting theR.C.C. pipes to required lengths, lowering the pipe,jointing , including connecting pipes to manholes andgrouting the pipe body with manhole wall using cementmortar 1:2 (1 cement : 2 sand), curing of joints, testing,draining of water, cleaning of pipe after testing,backfilling, making good the surface, including cutting ofroads/pavements, wherever required and making goodthe same, disposal of surplus earth outside plant batterylimits as specified in scope of work, commissioning etc.complete for all depths as per drawings, specificationsand instructions of Engineer-in-Charge. For following Pipesize (mm) Class 250 P1 _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 10 M

S/L UG RCC Pipes 300 mm dia Class P1 (Meter) _________________________________________________________________

Supplying & laying underground RCC pipes sewers withsocket and spigot ends conforming to IS:458, of approvedmake, to proper grade and alignment, including earthworkin excavation in all types of soil including soft rocks forpipe trenches, pits, manholes, etc. including dewatering,shoring and strutting if necessary, dressing of sides,leveling, grading and ramming of bottoms, cutting theR.C.C. pipes to required lengths, lowering the pipe,jointing , including connecting pipes to manholes andgrouting the pipe body with manhole wall using cementmortar 1:2 (1 cement : 2 sand), curing of joints, testing,draining of water, cleaning of pipe after testing,backfilling, making good the surface, including cutting ofroads/pavements, wherever required and making goodthe same, disposal of surplus earth outside plant batterylimits as specified in scope of work, commissioning etc.complete for all depths as per drawings, specificationsand instructions of Engineer-in-Charge. For following Pipesize (mm) Class300 P1 _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 5.000 M3

RR Maso. in CM 1:4 (Cubic meter) _________________________________________________________________

Providing and laying RANDOM STONE MASONRY incement mortar 1:4 (1 Cement : 4 Sand) in any shape andthickness for retaining wall, kerb wall, drain etc. or at anyother places as directed at all depth below plinth levelincluding PCC (M20) in foundation as per drawing &specification, including the cost of materials, labour,scaffolding/ staging, sampling and testing, dressing andwetting of Stones, providing recesses, openings, sealingthe gap between masonry and soffit of beam/ slab,embedding the fittings and fixtures, raking out the joints,curing, etc. all complete as specified. ALL MATERIALS



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________INCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 10 M

S/F/E & LAYING OF Nominal dia - 10 INCH, (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Supply, fabrication and laying of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification providingcement lining and external tape coating of piping as perspecification, including transportation of all piping items tocontractor's work site/work shop, earth work in excavationin all types of soil including soft rock but excluding hardrock for all depths for pipe trenches, man way pits, valvepits, instrument pits, saddles,making trial pits for location/routing of new/ existing underground piping for laying andhook-up with existing system etc.; including dewatering,fabrication including cutting, edge preparation, (inclusiveof grinding the edges of pipe, fittings, flanges etc. tomatch with the mating edges of uneven/differentthickness wherever required); fit up, bending,preheatingwherever required, welding, threading, andlaying of pipes of all types and thickness, laying the pipesin trenches torequired alignment and levels, welding thesame after laying, installation of flanges, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flanges wherevernecessary, tappings for pressure gauges, sampleconnections, etc. including fixing of gaskets, bolts, nutswherever required & all other online instruments andfittings, like elbows, reducers, tees, vents, drainsincluding providing reinforcing pads, providing stub in/branch connections, alignment, including internal cementlining & external tape coating as per specification 6-79-0011, cutting of existing road/pavements and makinggood the same, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, including Liquid penetration test or anyother test required asper relevant specification, back



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________filling the trenches with available earth, compaction of soilby suitable means by backfilling and disposal of thesurplus earth anywhere beyond BPCL complex (disposalareas to be arranged by contractor) completing all suchworks in all respects as per the specifications, drawingsand instructions of Engineer-in-Charge. (All pipingmaterials, coating/ cement lining materials/equipmentsshall be supplied by Contractor. Cement lining of pipesshall be carried out by the contractor outside the refineryarea. Area for fabrication & cement lining of piping shallbe arranged by the contractor outside refinery).(Nominal dia - 10 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 410 70 M


FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Supply, fabrication and laying of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification providingcement lining and external tape coating of piping as perspecification, including transportation of all piping items tocontractor's work site/work shop, earth work in excavationin all types of soil including soft rock but excluding hardrock for all depths for pipe trenches, man way pits, valvepits, instrument pits, saddles,making trial pits for location/routing of new/ existing underground piping for laying andhook-up with existing system etc.; including dewatering,fabrication including cutting, edge preparation, (inclusiveof grinding the edges of pipe, fittings, flanges etc. tomatch with the mating edges of uneven/differentthickness wherever required); fit up, bending,preheatingwherever required, welding, threading, andlaying of pipes of all types and thickness, laying the pipesin trenches torequired alignment and levels, welding thesame after laying, installation of flanges, provision of pipejoints as per scope of work & specifications including supply & erection ofcollars, breakup flanges wherevernecessary, tappings for pressure gauges, sampleconnections, etc. including fixing of gaskets, bolts, nutswherever required & all other online instruments and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________fittings, like elbows, reducers, tees, vents, drainsincluding providing reinforcing pads, providing stub in/branch connections, alignment, including internal cementlining & external tape coating as per specification 6-79-0011, cutting of existing road/pavements and makinggood the same, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, including Liquid penetration test oranyother test required as per relevant specification, backfilling the trenches with available earth, compaction of soilby suitable means by backfilling and disposal of thesurplus earth anywhere beyond BPCL complex (disposalareas to be arranged by contractor) completing all suchworks in all respects as per the specifications, drawingsand instructions of Engineer-in-Charge. (All pipingmaterials, coating/ cement lining materials/equipmentsshall be supplied by Contractor. Cement lining of pipesshall be carried out by the contractor outside the refineryarea. Area for fabrication & cement lining of piping shallbe arranged by the contractor outside refinery).(Nominal dia - 6 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 420 10 M


FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Supply, fabrication and laying of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification providingcement lining and external tape coating of piping as perspecification, including transportation of all piping items tocontractor's work site/work shop, earth work in excavationin all types of soil including soft rock but excluding hard rock for alldepths for pipe trenches, man way pits, valvepits, instrument pits, saddles,making trial pits forlocation/routing of new/existing underground piping forlaying and hook-up with existing system etc.; includingdewatering, fabrication including cutting, edgepreparation, (inclusive of grinding the edges of pipe,fittings, flanges etc. to match with the mating edges of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________uneven/different thickness wherever required); fit up,bending, preheating wherever required, welding,threading, and laying of pipes of all types and thickness,laying the pipes in trenches torequired alignment andlevels, welding the same after laying, installation offlanges, provision of pipe joints as per scope of work &specifications including supply & erection of collars,breakup flanges wherever necessary, tappings forpressure gauges, sample connections, etc. includingfixing of gaskets, bolts, nuts wherever required & all otheronline instruments and fittings, like elbows, reducers,tees, vents, drains including providing reinforcing pads,providing stub in/ branch connections, alignment,including internal cement lining & external tape coating asper specification 6-79-0011, cutting of existingroad/pavements and making good the same, cleaning &flushing by water/compressed air, hydrostatic, pneumatic,vacuum, spark testing and any other type of testing asspecified, draining, drying by compressed air, includingLiquid penetration test or any other test required as perrelevant specification, back filling the trenches withavailable earth, compaction of soil by suitable means bybackfilling and disposal of the surplus earth anywherebeyond BPCL complex (disposal areas to be arranged bycontractor) completing all such works in all respects asper the specifications, drawings and instructions ofEngineer-in-Charge. (All piping materials, coating/ cementlining materials/equipments shall be supplied byContractor. Cement lining of pipes shall be carried out by the contractoroutside the refinery area. Area forfabrication & cement lining of piping shall be arranged bythe contractor outside refinery).(Nominal dia - 4 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 430 250 M

RADIOGRAPHIC INSPECTION (Meter) _________________________________________________________________

RADIOGRAPHIC INSPECTION :-Performing radiographic inspection of all types of pipingjoints including providing all necessary equipments andwhatever else, even though not expressly mentioned butrequired to perform the work as per specifications andinstructions of Engineer-in-Charge. Radiograph to be



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________submitted to Engineer-in-Charge. Repeat radiographydue to defective films on repaired joints, due tocontractor's fault or for additional radiographynecessitated due to poor performance of contractor'swelders shall be at Contractor's own cost (Measurementshall be as per nominal bore in case of pipes).

NOTE-: UNIT-M SHOULD BE READ AS CMW (CIRCUMFERENTIAL METER WELD) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 440 205 NO

S/F & F RCC OR BRICK MASONRY WALL MS RUN (Number) _________________________________________________________________

Supplying, fabricating and fixing in position in RCC orbrick masonry walls MS rungs made out of 16 mm dia MSbars including laying or welding to keep in proper positionetc. complete as per drawings, specifications andinstructions of Engineer-in-Charge _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 450 20 EA

FIRE WATER HOOK UP (each) _________________________________________________________________

Fabrication and erection for piping hook-up/connectionwith existing underground/ aboveground line (CarbonSteel) for pipe tapping of dia10 inch and below as perapplicable Piping material specification including cuttingof existing line, fitting, welding, hydro testing, NDT asrequired etc. with all necessary safety measures asdirected by Engineer-in-Charge/Owner, complete as perspecifications and to the satisfaction of Engineer-in-Charge/Owner. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 460 120 M

L&J OF ERW PIPES 8 INCH A93A (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(SPEC.NO.6-65-0030 and 6-44-0012):Laying and joining of black steel tubes/ ERW pipes/Fabricated Steel pipes andspecials includingtransportation of all materials from Owner's storage pointto worksite, earthwork in excavation in all types of soilincluding soft rock but excluding hard rock for pipetrenches, saddles, making trial pits for location/ routing ofnew/ existing underground piping for laying and hook-upwith existing system etc. cutting of pipes if required, edgepreparation, providing corrosion protection coating as perspec no 6-79-0011 on pipes and specials, includingsupply of all coating material, laying the pipes in thetrenches to required alignment and levels, welding thesame after laying, installation of flanges (includingbreakup flanges wherever necessary), core cutting in theRCC manhole as required, tapping for pressure gauges,temperature gauges and all other online instruments ifrequired, fixing of nuts, bolts, gaskets and washers,welding, coal tar tape coating offield joints, NDT as perJob Specification, hydrostatic testing of the system,flushing, drying the pipeline with compressed air,backfilling the trenches, pits etc. with selected materialsfrom available excavated soil including re-excavating thedeposited soil excavated earlier, breaking clods andlaying at all depths in layers of 15cm loose thickness,watering and ramming to proper compaction, disposal ofsurplus earth/unserviceable material anywhere outsideplant boundary (disposal area to be arranged bycontractor), etc. complete as per drawings, specificationsand instructions of Engineer-in-Charge includingconnecting the pipes to manhole by grouting the pipebody with manhole wall using cement mortar 1:2 (1cement : 2 sand) and curing the joints including return ofall unused / scrap pipe to owner's storage point (Pipesand fittings shall be supplied by owner as free issue).Forwaste water system (Gravity Piping),dia.8", Piping Class A93A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 470 67 M

L&J OF ERW PIPES 6" DIA CLASS A93A (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Laying and joining of black steel tubes/ ERW



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________pipes/Fabricated Steel pipes and specials includingtransportation of all materials from Owner's storage pointto worksite, earthwork in excavation in all types of soilincluding soft rock but excluding hard rock for pipetrenches, saddles, making trial pits for location/ routing ofnew/ existing underground piping for laying and hook-upwith existing system etc. cutting of pipes if required, edgepreparation, providing corrosion protection coating as perspec no 6-79-0011 on pipes and specials, includingsupply of all coating material, laying the pipes in thetrenches to required alignment and levels, welding thesame after laying, installation of flanges (includingbreakup flanges wherever necessary), core cutting in theRCC manhole as required, tapping for pressure gauges,temperature gauges and all other online instruments ifrequired, fixing of nuts, bolts, gaskets and washers,welding, coal tar tape coating offield joints, NDT as perJob Specification, hydrostatic testing of the system,flushing, drying the pipeline with compressed air,backfilling the trenches, pits etc. with selected materialsfrom available excavated soil including re-excavating thedeposited soil excavated earlier, breaking clods andlaying at all depths in layers of 15cm loose thickness,watering and ramming to proper compaction, disposal ofsurplus earth/unserviceable material anywhere outsideplant boundary (disposal area to be arranged bycontractor), etc. complete as per drawings, specificationsand instructions of Engineer-in-Charge includingconnecting the pipes to manhole by grouting the pipebody with manhole wall using cement mortar 1:2 (1cement : 2 sand) and curing the joints including return ofall unused / scrap pipe to owner's storage point (Pipesand fittings shall be supplied by owner as free issue).For waste water system(Gravity Piping),dia.6", Piping ClassA93A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 480 91 M

L&J OF ERW PIPES DIA 4" CLASS A93A (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Laying and joining of black steel tubes/ ERWpipes/Fabricated Steel pipes and specials including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________transportation of all materials from Owner's storage pointto worksite, earthwork in excavation in all types of soilincluding soft rock but excluding hard rock for pipetrenches, saddles,making trial pits for location/ routing ofnew/ existing underground piping for laying and hook-upwith existing system etc. cutting of pipes if required, edgepreparation, providing corrosion protection coating as perspec no 6-79-0011 on pipes and specials, includingsupply of all coating material, laying the pipes in thetrenches to required alignment and levels, welding thesame after laying, installation of flanges (includingbreakup flanges wherever necessary), core cutting in theRCC manhole as required, tapping for pressure gauges,temperature gauges and all other online instruments ifrequired, fixing of nuts, bolts, gaskets and washers,welding, coal tar tape coating of field joints, NDT as perJob Specification, hydrostatic testing of the system,flushing, drying the pipeline with compressed air,backfilling the trenches, pits etc. with selected materialsfrom available excavated soil including re-excavating thedeposited soil excavated earlier, breaking clods andlaying at all depths in layers of 15cm loose thickness,watering and ramming to proper compaction, disposal ofsurplus earth/unserviceable material anywhere outsideplant boundary (disposal area to be arranged bycontractor), etc. complete as per drawings, specificationsand instructions of Engineer-in-Charge includingconnecting the pipes to manhole by grouting the pipebody with manhole wall using cement mortar 1:2 (1cement : 2 sand) and curing the joints including return of all unused / scrappipe to owner's storage point (Pipesand fittings shall be supplied by owner as free issue).Forwaste water system (Gravity Piping),dia.4", Piping ClassA93A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 490 93 M

L&J OF ERW PIPES OF DIA 10 INCH CLASS A9 (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Laying and joining of black steel tubes/ ERWpipes/Fabricated Steel pipes and specials includingtransportation of all materials from Owner's storage point



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________to worksite, earthwork in excavation in all types of soilincluding soft rock but excluding hard rock for pipetrenches, saddles, making trial pits for location/ routing ofnew/ existing underground piping for laying and hook-upwith existing system etc. cutting of pipes if required, edgepreparation, providing corrosion protection coating as perspec no 6-79-0011 on pipes and specials, includingsupply of all coating material, laying the pipes in thetrenches to required alignment and levels, welding thesame after laying, installation of flanges (includingbreakup flanges wherever necessary), core cutting in theRCC manhole as required, tapping for pressure gauges,temperature gauges and all other online instruments ifrequired, fixing of nuts, bolts, gaskets and washers,welding, coal tar tape coating offield joints, NDT as perJob Specification, hydrostatic testing of the system,flushing, drying the pipeline with compressed air,backfilling the trenches, pits etc. with selected materialsfrom available excavated soil including re-excavating thedeposited soil excavated earlier, breaking clods andlaying at all depths in layers of 15cm loose thickness,watering and ramming to proper compaction, disposal ofsurplus earth/unserviceable material anywhere outsideplant boundary (disposal area to be arranged bycontractor), etc. complete as per drawings, specificationsand instructions of Engineer-in-Charge includingconnecting the pipes to manhole by grouting the pipe body with manhole wallusing cement mortar 1:2 (1cement : 2 sand) and curing the joints including return ofall unused / scrap pipe to owner's storage point (Pipesand fittings shall be supplied by owner as free issue).Forwaste water system (Gravity Piping),dia.10", Piping ClassA94A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 500 39 M

L&J OF ERW PIPES 8 iNCH DIA CLASS A94A (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Laying and joining of black steel tubes/ ERWpipes/Fabricated Steel pipes and specials includingtransportation of all materials from Owner's storage pointto worksite, earthwork in excavation in all types of soil



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including soft rock but excluding hard rock for pipetrenches, saddles, making trial pits for location/ routing ofnew/ existing underground piping for laying and hook-upwith existing system etc. cutting of pipes if required, edgepreparation, providing corrosion protection coating as perspec no 6-79-0011 on pipes and specials, includingsupply of all coating material, laying the pipes in thetrenches to required alignment and levels, welding thesame after laying, installation of flanges (includingbreakup flanges wherever necessary), core cutting in theRCC manhole as required, tapping for pressure gauges,temperature gauges and all other online instruments ifrequired, fixing of nuts, bolts, gaskets and washers,welding, coal tar tape coating offield joints, NDT as perJob Specification, hydrostatic testing of the system,flushing, drying the pipeline with compressed air,backfilling the trenches, pits etc. with selected materialsfrom available excavated soil including re-excavating thedeposited soil excavated earlier, breaking clods andlaying at all depths in layers of 15cm loose thickness,watering and ramming to proper compaction, disposal ofsurplus earth/unserviceable material anywhere outsideplant boundary (disposal area to be arranged bycontractor), etc. complete as per drawings, specifications and instructions ofEngineer-in-Charge includingconnecting the pipes to manhole by grouting the pipebody with manhole wall using cement mortar 1:2 (1cement : 2 sand) and curing the joints including return ofall unused / scrap pipe to owner's storage point (Pipesand fittings shall be supplied by owner as free issue).Forwaste water system (Gravity Piping),dia.8", Piping ClassA94A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 510 48 M

S/F & F BELOW GRADE STEEL TUBE VENT PIPE (Meter) _________________________________________________________________

Supplying, fabrication and fixing in position black steeltube vent pipes (Medium class as per IS:1239) 100mmdia. with specials and necessary fittings including cuttingto required length, edge preparation, jointing by welding,making and fixing single joint mitre bends whereverrequired, earth work in excavation and back filling, fixingin concrete blocks, providing painting as per BPCL



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________painting specification on above grade portion andsupplying and fixing clamps, corrosion protection tapecoating as per spec. no. 6-79-0011 for undergroundportion complete in all respects including all labour andmaterials, etc. as per drawings specifications anddirection of Engineer-in-Charge.For BELOW grade level/ Pavement level _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 520 96 M

S/F & F ABOVE GRADE STEEL TUBE VENT PIPE (Meter) _________________________________________________________________

Supplying, fabrication and fixing in position black steeltube vent pipes (Medium class as per IS:1239) 100mmdia. with specials and necessary fittings including cuttingto required length, edge preparation, jointing by welding,making and fixing single joint mitre bends whereverrequired, earth work in excavation and back filling, fixingin concrete blocks, providing painting as per BPCLpainting specification on above grade portion andsupplying and fixing clamps, corrosion protection tapecoating as per spec. no. 6-79-0011 for undergroundportion complete in all respects including all labour andmaterials, etc. as per drawings specifications anddirection of Engineer-in-Charge.For ABOVE grade level/ Pavement level _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 530 246 M

L&J OF ERW PIPES 3" CLASS A19A (CBD/AD) (Meter) _________________________________________________________________

Laying and joining of black steel tubes/ ERW pipes/C.S.pipes/ seamless CS pipes/Fabricated Steel pipes andspecials for U/G CBD/ABD/SBD/CL system etc. as perstd. No. 7-65-0269 & specification attached with thistender including transportation of all materials fromowner's storage points to work site, earthwork inexcavation in all types of soil including soft rock butexcluding hard rock in specification for trenches,cleanout etc. cutting of pipes if required, edgepreparation, joining by welding, providing and applying



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________paint as per BPCL painting specification of required linetemperature, making trial pits for location/ routing ofnew/existing underground piping for laying and hook-upwith existing system, laying the pipes in trenches torequired alignment and levels, welding the same afterlaying, installation of flanges/blind flanges, fixing ofnuts, bolts, gaskets and washers, painting of fieldjoints with paint,hydrostatic testing of system,flushing, draining, supply and filling gravel around thepipe, backfilling the trenches with select materialfrom available excavated soil including re-excavatingthe deposited soil excavated earlier, breaking clodsand laying in layers of 15cm compacted thickness,watering and compacting with mechanical means likevibro rammers etc. to 90% standard proctor densityas per IS-2720 Part- VII and disposal of surplusearth/ unserviceable material anywhere outside plantboundary (disposal area to be arranged by contractor),complete as per drawings, specifications andinstructions of engineer-in-charge including return ofall unused/scrap pipes to owner's storage points.(Pipes & fittings shall be supplied by the owner as freeissue material).3" dia and piping material class A19A. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 540 131 M

L&J ERW PIPES 2" DIA PIPE CLASS A19A (Meter) _________________________________________________________________

Laying and joining of black steel tubes/ ERW pipes/C.S.pipes/ seamless CS pipes/Fabricated Steel pipes andspecials for U/G CBD/ABD/SBD/CL system etc. as perstd. No. 7-65-0269 & specification attached with thistender including transportation of all materials fromowner's storage points to work site, earthwork inexcavation in all types of soil including soft rock butexcluding hard rock in specification for trenches,cleanout etc. cutting of pipes if required, edgepreparation, joining by welding, providing and applyingpaint as per BPCL painting specification of required linetemperature, making trial pits for location/ routing ofnew/existing underground piping for laying and hook-upwith existing system, laying the pipes in trenches torequired alignment and levels, welding the same after



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________laying, installation of flanges/blind flanges, fixing ofnuts, bolts, gaskets and washers, painting of fieldjoints with paint,hydrostatic testing of system,flushing, draining, supply and filling gravel around thepipe, backfilling the trenches with select materialfrom available excavated soil including re-excavatingthe deposited soil excavated earlier, breaking clodsand laying in layers of 15cm compacted thickness,watering and compacting with mechanical means likevibro rammers etc. to 90% standard proctor densityas per IS-2720 Part- VII and disposal of surplusearth/ unserviceable material anywhere outside plantboundary (disposal area to be arranged by contractor),complete as per drawings, specifications andinstructions of engineer-in-charge including return ofall unused/scrap pipes to owner's storage points.(Pipes & fittings shall be supplied by the owner as freeissue material).2" dia and piping material class A19A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 550 4 NO

TRANSPORTATION OF VALVES - 3" PIPING CLA (Number) _________________________________________________________________

Transportation of all kind of valves(including specials)from owner's storage point to contractor's store /work site and installationof valves in valve pit for all rating includingassembly of valve accessories, if any, fixing of gaskets,bolts/nuts etc. complete as per specifications drawingsand direction of Engineer-in-charge including returning allunused/ surplus material to owner¿s storage point (valvesalong with accessories shall be supplied by owner as freeissue material)Flanged/ Wafer Valves(Nominal Dia (3") - INCH Piping Material Class A19A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 560 4 NO

TRANSPORTATION OF VALVES 2" DIA A19A (Number) _________________________________________________________________

Transportation of all kind of valves(including specials)



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________from owner's storage point to contractor's store /work siteand installation of valves in valve pit for all rating includingassembly of valve accessories, if any, fixing of gaskets,bolts/nuts etc. complete as per specifications drawingsand direction of Engineer-in-charge including returning allunused/ surplus material to owner¿s storage point (valvesalong with accessories shall be supplied by owner as freeissue material)Flanged/ Wafer Valves(Nominal Dia (2") - INCH Piping Material Class A19A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 570 25.000 M3

S/F APPROVED SAND/ STONE DUST (Cubic meter) _________________________________________________________________

Supplying and filling approved sand/stone dust ofspecified quality in R.C.C. trenches for all depths andheights including removing the pre-cast R.C.C. slabs,hand packing the sand below, on sides and top of pipe,manual compaction of sand and without damaging refixingthe R.C.C. Precast slabs / covers in position. Thejob is inclusive of cost of sand/stone dust, royalties,loading, spreading in layers of loose thickness notexceeding 150 mm, watering ramming, manuallycompacting all complete as per Drawings, Specificationsand direction of Engineer-in-Charge _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 580 10.000 M3

S/F APPROVED COARSE SAND (Cubic meter) _________________________________________________________________

Supplying and filling approved coarse sand (Zone-I &Zone-II gradation) of specified quality for all depths underpavements, hard stands etc. The job is inclusive of cost of sand, surfacepreparation by compacting to 95% max.lab. dry density as per IS:2720 Part VIII, spreading sand/in layers of loose thickness not exceeding 150mm andmechanically compacting to 85% relative density as perIS:2720 part XIV complete as per drawings, specificationsand directions of Engineer-in-charge. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 590 20 M

3" DRINKING WATER GI PIPING CLASS J2A (Meter) _________________________________________________________________

Drinking water G.I. PIPING (UNDER GROUND)Supplying and laying mild steel galvanised pipes fordrinking water system as per piping materialsspecification class J2A including supply and installation ofall fittings,tees,elbows,nipples,unions, teflon tapes, whitelead etc. cutting the pipes to required lengths, makingthreads, earthwork in excavation for trenches, valve pits,etc. in all types of soil including soft rock but excludinghard rock, including laying of pipes in trenches, cutting,joining the pipes and fittings with threaded connections,hydrostatic testing of the piping, backfilling the trencheswith selected/approved earth fill material, cutting ofroads/pavements wherever required, making good theroad surface after laying, disposal of surplus earthanywhere beyond BPCL complex (disposal area shall bearranged by contractor)., etc. including supply ofnecessary fittings etc. complete as per specifications,drawings and directions of Engineer-in-Charge. ForNom.Size 3 INCH , Piping Class J2A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 600 20 M

2" DRINKING WATER GI PIPING CLASS J2A (Meter) _________________________________________________________________

Drinking water G.I. PIPING (UNDER GROUND)Supplying and laying mild steel galvanised pipes fordrinking water system as per piping materialsspecification class J2A including supply and installation ofall fittings,tees,elbows,nipples,unions, teflon tapes, whitelead etc. cutting the pipes to required lengths, makingthreads, earthwork in excavation for trenches, valve pits,etc. in all types of soil including soft rock but excludinghard rock, including laying of pipes in trenches, cutting,joining the pipes and fittings with threaded connections, hydrostatic testingof the piping, backfilling the trencheswith selected/approved earth fill material, cutting of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________roads/pavements wherever required, making good theroad surface after laying, disposal of surplus earthanywhere beyond BPCL complex (disposal area shall bearranged by contractor)., etc. including supply ofnecessary fittings etc. complete as per specifications,drawings and directions of Engineer-in-Charge. ForNom.Size 2 INCH , Piping Class J2A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 610 120 M

2" DIA DRINKING WATER GI PIPING CLASS J2 (Meter) _________________________________________________________________

Drinking water G.I. PIPING (ABOVE GROUND)Supplying and laying ABOVE GROUND mild steelgalvanized pipes for drinking water system as per pipingmaterial specification class J2A including supply andinstallation of all fittings, tees, elbows, nipples, unions,teflon tapes, white lead etc., cutting the pipes to requiredlengths, making threads, including laying of pipes on piperack, sleepers, T-supports, erection of piping ontechnological structures etc. including joining of pipes andfittings with threaded/flanged connections, insulation ofpipes as per specification etc. hydrostatic testing of thepiping including supply of necessary pipe supports,complete as per data sheets, specifications, PFD/P&IDs/drawings and direction of Engineer-in-charge.( Nominal Dia - 3 Inch Piping Material Class -J2A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 620 105 M

1" DIA DRINKING WATER GI PIPING CLASS J2 (Meter) _________________________________________________________________

Drinking water G.I. PIPING (ABOVE GROUND)Supplying and laying ABOVE GROUND mild steelgalvanized pipes for drinking water system as per pipingmaterial specification class J2A including supply andinstallation of all fittings, tees, elbows, nipples, unions,teflon tapes, white lead etc., cutting the pipes to requiredlengths, making threads, including laying of pipes on piperack, sleepers, T-supports, erection of piping ontechnological structures etc. including joining of pipes and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________fittings with threaded/flanged connections, insulation ofpipes as per specification etc. hydrostatic testing of the piping includingsupply of necessary pipe supports,complete as per data sheets, specifications, PFD/P&IDs/drawings and direction of Engineer-in-charge.( Nominal Dia - 2 Inch Piping Material Class -J2A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 630 25 M

3" AG DRINKING WATER GI PIPING CLASS J2A (Meter) _________________________________________________________________

Drinking water G.I. PIPING (ABOVE GROUND)Supplying and laying ABOVE GROUND mild steelgalvanized pipes for drinking water system as per pipingmaterial specification class J2A including supply andinstallation of all fittings, tees, elbows, nipples, unions,teflon tapes, white lead etc., cutting the pipes to requiredlengths, making threads, including laying of pipes on piperack, sleepers, T-supports, erection of piping ontechnological structures etc. including joining of pipes andfittings with threaded/flanged connections, insulation ofpipes as per specification etc. hydrostatic testing of thepiping including supply of necessary pipe supports,complete as per data sheets, specifications, PFD/P&IDs/drawings and direction of Engineer-in-charge.( Nominal Dia - 1.5 Inch Piping Material Class -J2A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 640 1 EA

10" PIPE SLEEVE CLASS A94A (each) _________________________________________________________________

Supply and laying of carbon steel pipe sleeve (Pipingspecification A94A) for pipe road crossings includingtransportation of all material to worksite, earthwork inexcavation in all types of soil including soft rock for pipetrenches, cutting of road/ pavements wherever required &making good the same ,cutting of pipes if required, layingthe pipes to required alignment and levels, welding thesame after laying, tape coating of sleeves as perspecifications, providing concrete encasement, ifrequired, as specified in EIL Standard 7-65-0213



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________backfilling the trenches with available earth and disposalof the surplus earth outside plant battery limits as perscope of wok etc. complete as per drawings,specifications and instructions of Engineer-in-charge.For following Pipe size (Inch) Class A94A (Average lengthof sleeve is 12M) Dia 16" _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 650 2 EA

12" PIPE SLEEVE CLASS A94A (each) _________________________________________________________________

Supply and laying of carbon steel pipe sleeve (Pipingspecification A94A) for pipe road crossings includingtransportation of all material to worksite, earthwork inexcavation in all types of soil including soft rock for pipetrenches, cutting of road/ pavements wherever required &making good the same ,cutting of pipes if required, layingthe pipes to required alignment and levels, welding thesame after laying, tape coating of sleeves as perspecifications, providing concrete encasement, ifrequired, as specified in EIL Standard 7-65-0213backfilling the trenches with available earth and disposalof the surplus earth outside plant battery limits as perscope of wok etc. complete as per drawings,specifications and instructions of Engineer-in-charge.For following Pipe size (Inch) Class A94A (Average lengthof sleeve is 12M)Dia 12" _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 660 600 M

Cutting, Dismantling of existing UG pipe (Meter) _________________________________________________________________

Cutting, Dismantling of existing UG pipes and Sealing/Capping of existing underground pipes, existing OWSfunnels with plates/pipes, fixing in position, aligningincluding all welding, cutting works, supply of allconsumables/ materials and disposal of dismantled,serviceable / unserviceable materials etc. up to owner'sscrap yard as per direction of Engineer-In-Charge.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________NOTE-: UNIT-M SHOULD BE READ AS CMW (CIRCUMFERENTIAL METER WELD) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 670 10 M

S/F/E of A/G Pipe 10 inch A33Y (Meter) _________________________________________________________________

PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/work shop; fabricationincluding cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 10 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 680 40 M


PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply of all fittings &specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing all



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________such works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 8 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 690 270 M

S/F/E of A/G pipe 6 inch A33Y (Meter) _________________________________________________________________

PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressed



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________air, hydrostatic, pneumatic, vacuum, spark testing and any other type oftesting as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 6 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 700 40 M


PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc. including fixing ofgaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 4 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 710 30 M


PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipe joints as per scope ofwork & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orifice



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________assemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 3 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 720 6 M


PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for hoghly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation, (inclusive of grindingthe edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________supply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 2 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 730 15 M


PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blind flanges etc. alongwith matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipes



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________of all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by the contractor outside therefinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 1 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 740 10 M

S/F/E of A/G pipe 0.75 inch A33Y (Meter) _________________________________________________________________

PIPING (ABOVE GROUND)Supply, fabrication, erection of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification, includingsurface preparation, providing cement lining andpainting/FRE-lining on pipes, fittings, flanges, valves,strainers etc. as per specification for highly corrosiveenvironment, transportation of all piping to work site/workshop; fabrication including cutting, edge preparation,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(inclusive of grinding the edges of pipe, fittings, flangesetc. to match with the mating edges of uneven/differentthickness wherever required); fit up, bending, preheatingwherever required, welding, threading, and laying of pipesof all types and thickness over sleepers/pipe supports,including supply & construction of pipe supports,overhead on racks at all elevations, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flange wherevernecessary, connecting with equipment nozzles, providingcorrosion pad, saddles for all bare lines on sleepers/pipesupports, erection of strainer elements, orificeassemblies, rota meters, tappings for pressure gauges,mass flow meters, thermo wells, sample connections etc.including fixing of gaskets, bolts, nuts wherever required& all other online instruments and fittings, like elbows,reducers, tees, vents, drains including providingreinforcing pads, stub in/ branch connections, alignment;including cement lining of welded joints as perspecifications, cleaning & flushing by water/ compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying by compressed air,Including liquid penetration test or anyother test required as per specification, completing allsuch works in all respects as per the specifications,drawings and instructions of Engineer-in-Charge. (Allpiping materials, coating/ cement liningmaterials/equipments shall be supplied by Contractor.Cement lining of pipes shall be carried out by thecontractor outside the refinery area. Area for fabrication& cement lining of piping shall be arranged by thecontractor outside refinery).(Nominal dia - 0.75 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 750 25 M

1.5"DIA DW GI PIPE J2A (Meter) _________________________________________________________________

Drinking water G.I. PIPING (ABOVE GROUND)Supplying and laying ABOVE GROUND mild steelgalvanized pipes for drinking water system as per pipingmaterial specification class J2A including supply andinstallation of all fittings, tees, elbows, nipples, unions,teflon tapes, white lead etc., cutting the pipes to required



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________lengths, making threads, including laying of pipes on piperack, sleepers, T-supports, erection of piping ontechnological structures etc. including joining of pipes andfittings with threaded/flanged connections, insulation ofpipes as per specification etc. hydrostatic testing of thepiping including supply of necessary pipe supports,complete as per data sheets, specifications, PFD/P&IDs/drawings and direction of Engineer-in-charge.( Nominal Dia - 1.5 Inch Piping Material Class -J2A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 760 40 M

S/F/E & LAYING 8" DIA UG PIPE-PIPING CL (Meter) _________________________________________________________________

FABRICATION AND ERECTION OF PIPING(SPEC.NO.6-65-0030 and 6-44-0012):Supply, fabrication and laying of pipes including supply ofall fittings & specials, flanges, blind/spectacle blindflanges etc. along with matching flanges, stud bolts,gaskets etc. as per piping material specification providingcement lining and external tape coating of piping as perspecification, including transportation of all piping items tocontractor's work site/work shop, earth work in excavation in all types ofsoil including soft rock but excluding hardrock for all depths for pipe trenches, man way pits, valvepits, instrument pits, saddles,making trial pits for location/routing of new/ existing underground piping for laying andhook-up with existing system etc.; including dewatering,fabrication including cutting, edge preparation, (inclusiveof grinding the edges of pipe, fittings, flanges etc. tomatch with the mating edges of uneven/differentthickness wherever required); fit up, bending,preheatingwherever required, welding, threading, andlaying of pipes of all types and thickness, laying the pipesin trenches torequired alignment and levels, welding thesame after laying, installation of flanges, provision of pipejoints as per scope of work & specifications includingsupply & erection of collars, breakup flanges wherevernecessary, tappings for pressure gauges, sampleconnections, etc. including fixing of gaskets, bolts, nutswherever required & all other online instruments andfittings, like elbows, reducers, tees, vents, drainsincluding providing reinforcing pads, providing stub in/branch connections, alignment, including internal cement



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________lining & external tape coating as per specification 6-79-0011, cutting of existing road/pavements and makinggood the same, cleaning & flushing by water/compressedair, hydrostatic, pneumatic, vacuum, spark testing andany other type of testing as specified, draining, drying bycompressed air, including Liquid penetration test oranyother test required as per relevant specification, backfilling the trenches with available earth, compaction of soilby suitable means by backfilling and disposal of thesurplus earth anywhere beyond BPCL complex (disposalareas to be arranged by contractor) completing all suchworks in all respects as per the specifications, drawingsand instructions of Engineer-in-Charge. (All pipingmaterials, coating/ cement lining materials/equipmentsshall be supplied by Contractor. Cement lining of pipes shall be carried outby the contractor outside the refineryarea. Area for fabrication & cement lining of piping shallbe arranged by the contractor outside refinery).(Nominal dia - 8 INCH, Piping Class - A33Y) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 770 15 M

Construction of ERC/IRC (Meter) _________________________________________________________________

Construction of ERC/IRC as per Std. no.7-65-0006including supplying and laying in position PVC pipesconforming to IS:4985 Class-I for electrical andinstrumentation Road Crossings as per standard drawingno. 7-65-0006 and its addendum, including cutting thepipes if necessary, lowering, laying in position to properlevels, etc. embedded in concrete, providing properjointing as per code requirements or manufacturer'srecommendations, etc. including earthwork in excavationin all types of soil including soft rock but excluding hardrock, backfilling and making good the surface, includingcutting of new/ existing roads and making good the sameincluding supply of any road material if required, (Backfilling with road material shall be done in 150 mm thicklayers well watered and compacted), including supplyingand providing in the encasement concrete, cable crossingindicator made out of 4 mm thick MS circular plate of dia.150mm welded to 16 mm dia. MS rod of approximately1.0 m length and painting and lettering with 2 coats ofapproved enamel paint of approved colour over a coat of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________red oxide primer etc., supply and fixing of reinforcementas per drawing, including disposal of surplus earthanywhere outside plant boundary limit at approvedlocation as specified in the scope of work etc. allcomplete as per drawings, specifications and instructionsof Engineer-in-Charge. (All material including cement andreinforcement bar shall be supplied by Contractor)(Layers x Rows - 4x4, Dia - 160 mm) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 780 15 M

Construction of ERC/IRC 2x2 (Meter) _________________________________________________________________

Construction of ERC/IRC as per Std. no.7-65-0006including supplying and laying in position PVC pipesconforming to IS:4985 Class-I for electrical and instrumentation RoadCrossings as per standard drawingno. 7-65-0006 and its addendum, including cutting thepipes if necessary, lowering, laying in position to properlevels, etc. embedded in concrete, providing properjointing as per code requirements or manufacturer'srecommendations, etc. including earthwork in excavationin all types of soil including soft rock but excluding hardrock, backfilling and making good the surface, includingcutting of new/ existing roads and making good the sameincluding supply of any road material if required, (Backfilling with road material shall be done in 150 mm thicklayers well watered and compacted), including supplyingand providing in the encasement concrete, cable crossingindicator made out of 4 mm thick MS circular plate of dia.150mm welded to 16 mm dia. MS rod of approximately1.0 m length and painting and lettering with 2 coats ofapproved enamel paint of approved colour over a coat ofred oxide primer etc., supply and fixing of reinforcementas per drawing, including disposal of surplus earthanywhere outside plant boundary limit at approvedlocation as specified in the scope of work etc. allcomplete as per drawings, specifications and instructionsof Engineer-in-Charge. (All material including cement andreinforcement bar shall be supplied by Contractor)(Layers x Rows - 2x2, Dia - 160 mm) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 790 10 M

4" AG Drinking Water Header (Meter) _________________________________________________________________

Drinking water G.I. PIPING (ABOVE GROUND)Supplying and laying ABOVE GROUND mild steelgalvanized pipes for drinking water system as per pipingmaterial specification class J2A including supply andinstallation of reducing tees, fittings, elbows, nipples,Teflon tapes, white lead etc., cutting the pipes to requiredlengths, making threads, including laying of pipes on piperack, sleepers, T-supports, erection of piping ontechnological structures etc. including joining of pipes andfittings with threaded/flanged connections, insulation ofpipes as per specification etc. hydrostatic testing of the piping includingsupply of necessary fittings etc. and pipesupports complete as per data sheets, specifications,PFD/ P&IDs/drawings and instructions of Engineer-incharge.( Nominal Dia - 4 Inch Piping Material Class -J2A ) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 800 5 M

4" Drinking Water UG Piping (Meter) _________________________________________________________________

Drinking water G.I. PIPING (UNDER GROUND)Supplying and laying mild steel galvanised pipes fordrinking water system as per piping materialsspecification class J2A including supply and installation ofall fittings,tees,elbows,nipples,unions,teflon tapes, whitelead etc. cutting the pipes to required lengths, makingthreads, earthwork in excavation for trenches, valve pits,etc. in all types of soil including soft rock but excludinghard rock, including laying of pipes in trenches, cutting,joining the pipes and fittings with threaded connections,hydrostatic testing of the piping, backfilling the trencheswith selected/approved earth fill material, cutting ofroads/pavements wherever required, making good theroad surface after laying, disposal of surplus earthanywhere beyond BPCL complex (disposal area shall bearranged by contractor)., etc. including supply of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________necessary fittings etc. complete as per specifications,drawings and directions of Engineer-in-Charge. ForNom.Size 4 INCH, Piping Class J2A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 810 15 M

CONSTRUCTION OF ERC-IRC 1X2 (Meter) _________________________________________________________________

Construction of ERC/IRC as per Std. no.7-65-0006including supplying and laying in position PVC pipesconforming to IS:4985 Class-I for electrical andinstrumentation Road Crossings as per standard drawingno. 7-65-0006 and its addendum, including cutting thepipes if necessary, lowering, laying in position to properlevels, etc. embedded in concrete, providing properjointing as per code requirements or manufacturer'srecommendations, etc. including earthwork in excavationin all types of soil including soft rock but excluding hardrock, backfilling and making good the surface, including cutting of new/existing roads and making good the sameincluding supply of any road material if required, (Backfilling with road material shall be done in 150 mm thicklayers well watered and compacted), including supplyingand providing in the encasement concrete, cable crossingindicator made out of 4 mm thick MS circular plate of dia.150mm welded to 16 mm dia. MS rod of approximately1.0 m length and painting and lettering with 2 coats ofapproved enamel paint of approved colour over a coat ofred oxide primer etc., supply and fixing of reinforcementas per drawing, including disposal of surplus earthanywhere outside plant boundary limit at approvedlocation as specified in the scope of work etc. allcomplete as per drawings, specifications and instructionsof Engineer-in-Charge. (All material including cement andreinforcement bar shall be supplied by Contractor)(Layers x Rows - 1x2, Dia - 160 mm) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 820 2 NO

S/I of Hydrant (Number) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.Stand Post type fire hydrant ( Double outlet) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 830 2 NO

S/I of Water cum foam monitor (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.Water cum foam monitor _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 840 12 NO

S/I of First Aid hose reel wall mounted (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.First Aid hose reel wall mounted type _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 850 1 NO

S/I of First Aid hose reel floor mounted (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.First Aid hose reel floor mounted type _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 860 35 M

L/J CL-LIne 2" dia and piping material c (Meter) _________________________________________________________________

Laying and joining of black steel tubes/ ERW pipes/C.S.pipes/ seamless CS pipes/Fabricated Steel pipes andspecials for U/G CBD/ABD/SBD/CL system etc. as perstd. No. 7-65-0269 & specification attached with thistender including transportation of all materials fromowner's storage points to work site, earthwork inexcavation in all types of soil including soft rock butexcluding hard rock in specification for trenches,cleanout etc. cutting of pipes if required, edgepreparation, joining by welding, providing and applyingpaint as per BPCL painting specification of required linetemperature, making trial pits for location/ routing ofnew/existing underground piping for laying and hook-upwith existing system, laying the pipes in trenches torequired alignment and levels, welding the same afterlaying, installation of flanges/blind flanges, fixing ofnuts, bolts, gaskets and washers, painting of field joints withpaint,hydrostatic testing of system,flushing, draining, supply and filling gravel around thepipe, backfilling the trenches with select materialfrom available excavated soil including re-excavatingthe deposited soil excavated earlier, breaking clodsand laying in layers of 15cm compacted thickness,watering and compacting with mechanical means likevibro rammers etc. to 90% standard proctor densityas per IS-2720 Part- VII and disposal of surplus



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________earth/ unserviceable material anywhere outside plantboundary (disposal area to be arranged by contractor),complete as per drawings, specifications andinstructions of engineer-in-charge including return ofall unused/scrap pipes to owner's storage points.(Pipes & fittings shall be supplied by the owner as freeissue material).2" dia and piping material class A1A. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 870 20 M

L/J of CL-Line 0.75" dia and piping mate (Meter) _________________________________________________________________

Laying and joining of black steel tubes/ ERW pipes/C.S.pipes/ seamless CS pipes/Fabricated Steel pipes andspecials for U/G CBD/ABD/SBD/CL system etc. as perstd. No. 7-65-0269 & specification attached with thistender including transportation of all materials fromowner's storage points to work site, earthwork inexcavation in all types of soil including soft rock butexcluding hard rock in specification for trenches,cleanout etc. cutting of pipes if required, edgepreparation, joining by welding, providing and applyingpaint as per BPCL painting specification of required linetemperature, making trial pits for location/ routing ofnew/existing underground piping for laying and hook-upwith existing system, laying the pipes in trenches torequired alignment and levels, welding the same afterlaying, installation of flanges/blind flanges, fixing ofnuts, bolts, gaskets and washers, painting of fieldjoints with paint,hydrostatic testing of system,flushing, draining, supply and filling gravel around the pipe, backfilling thetrenches with select materialfrom available excavated soil including re-excavatingthe deposited soil excavated earlier, breaking clodsand laying in layers of 15cm compacted thickness,watering and compacting with mechanical means likevibro rammers etc. to 90% standard proctor densityas per IS-2720 Part- VII and disposal of surplusearth/ unserviceable material anywhere outside plantboundary (disposal area to be arranged by contractor),complete as per drawings, specifications andinstructions of engineer-in-charge including return ofall unused/scrap pipes to owner's storage points.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(Pipes & fittings shall be supplied by the owner as freeissue material).0.75" dia and piping material class A1A. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 880 5 NO

Transportation of valves - 0.75" A19A (Number) _________________________________________________________________

Transportation of all kind of valves(including specials)from owner's storage point to contractor's store /work siteand installation of valves in valve pit for all rating includingassembly of valve accessories, if any, fixing of gaskets,bolts/nuts etc. complete as per specifications drawingsand direction of Engineer-in-charge including returning allunused/ surplus material to owner¿s storage point (valvesalong with accessories shall be supplied by owner as freeissue material)Flanged/ Wafer Valves(Nominal Dia (0.75") - INCH Piping Material Class A19A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 890 1 NO

Transportation of valves 2"-A1A (Number) _________________________________________________________________

Transportation of all kind of valves(including specials)from owner's storage point to contractor's store /work siteand installation of valves in valve pit for all rating includingassembly of valve accessories, if any, fixing of gaskets,bolts/nuts etc. complete as per specifications drawingsand direction of Engineer-in-charge including returning allunused/ surplus material to owner¿s storage point (valvesalong with accessories shall be supplied by owner as freeissue material) Flanged/ Wafer Valves(Nominal Dia (2") - INCH Piping Material Class A1A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 900 1 NO

Transportation of valves - 0.75" A1A (Number)




_________________________________________________________________Transportation of all kind of valves(including specials)from owner's storage point to contractor's store /work siteand installation of valves in valve pit for all rating includingassembly of valve accessories, if any, fixing of gaskets,bolts/nuts etc. complete as per specifications drawingsand direction of Engineer-in-charge including returning allunused/ surplus material to owner¿s storage point (valvesalong with accessories shall be supplied by owner as freeissue material)Flanged/ Wafer Valves(Nominal Dia (0.75") - INCH Piping Material Class A19A _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 910 2 NO

S/I of hose box Type-I(W.M.) (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.Hose box cabinet Type-I (Wall mounted type) including allinside accessories, including all civil works, fixing inposition with anchor bolts in foundations or wall _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 920 11 NO

S/l of Hose box Type-II (S.S.) (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Hose box cabinet Type-II (Self supporting type) including all insideaccessories, including all civil works, fixing inposition with anchor bolts in foundations or wall _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 930 1 NO

S/I of hose box Type-II (W.M.) (Number) _________________________________________________________________

Supply, installation, testing and commissioning offollowing firefighting equipment as per relevantspecifications, data sheet, drawing, including painting,transporting the equipment to worksite, fixing of nuts,bolts, washers, gaskets, welding needed for fixing theequipment with matching flange etc. all complete as perdrawings, specifications, standards, data sheet anddirection of Engineer-in-Charge.Hose box cabinet Type-II (Wall mounted type) includingall inside accessories, including all civil works, fixing inposition with anchor bolts in foundations or wall _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________00520 STRUCTURAL & ARCHITECTURAL WORK 30.04.2016_______________________________________________________________________ The item 00520 covers the following services:_______________________________________________________________________ 10 700.000 M3

Earthwork excavation in soil (Cubic meter) _________________________________________________________________

AS PER EIL SOR NO. 7_A710-000-55-48-PK-SOR-3010-0

EARTH WORK (REFER SPECIFICATION NO. 6-68-0003) _Earthwork excavation in soil_Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOILS EXCEPT SOFTROCK AND HARD ROCK as classified in specification fora depth upto 1.5m including removal of vegetation,shrubs and debris, cutting and dressing of sides inslopes, levelling, grading and ramming of bottoms,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________dewatering of accumulated water from any source andkeeping the surface dry for subsequent works andstacking of excavated material within a lead of 2.0 KM ordisposal, as directed including providing temporarysupports to existing service lines like water pipes, sewagepipes, electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 20 250.000 M3


Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOILS EXCEPT SOFTROCK AND HARD ROCK as classified in specification fora depth beyond 1.5m and upto and inclusive of 3.0mincluding removal of vegetation, shrubs and debris,cutting and dressing of sides in slopes, levelling, gradingand ramming of bottoms, dewatering of accumulatedwater from any source and keeping the surface dry forsubsequent works and stacking of excavated materialwithin a lead of 2.0 KM or disposal , as directed includingproviding temporary supports to existing service lines likewater pipes, sewage pipes, electric overhead andunderground cables etc. all complete, but excludingshoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 30 100.000 M3


Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK asclassified in specification fora depth beyond 3.0m and upto & inclusive of 4.5mincluding removal of vegetation, shrubs and debris,cutting and dressing of sides in slopes, levelling, gradingand ramming of bottoms, dewatering of accumulatedwater from any source and keeping the surface dry forsubsequent works and stacking of excavated materialwithin a lead of 2.0KM or disposal, as directed including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________providing temporary supports to existing service lines likewater pipes, sewage pipes, electric overhead andunderground cables etc. all complete, but excludingshoring and strutting _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 200.000 M3

Earthwork excavation in soft rock (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of works in SOFT ROCK as classified inspecification for a depth upto 1.5m including removal ofvegetation, shrubs and debris, cutting and dressing ofsides in slopes, levelling, grading and ramming ofbottoms, dewatering of accumulated water from anysource and keeping the surface dry for subsequent worksand stacking of excavated material within a lead of 2.0KM or disposal, as directed including providing temporarysupports to existing service lines like water pipes, sewagepipes, electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 150.000 M3


Earth work in EXCAVATION below ground level for allkinds of works in SOFT ROCK as classified inspecification for a depth beyond 1.5m and upto &inclusive of 3.0m including removal of vegetation, shrubsand debris, cutting and dressing of sides in slopes,levelling, grading and ramming of bottoms, dewatering ofaccumulated water from any source and keeping thesurface dry for subsequent works and stacking of excavated material within alead of 2.0 KM or disposal, asdirected including providing temporary supports toexisting service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _ _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 50.000 M3


Earth work in EXCAVATION below ground level for allkinds of works in SOFT ROCK as classified inspecification for a depth beyond 3.0m and upto &inclusive of 4.5m including removal of vegetation, shrubsand debris, cutting and dressing of sides in slopes,levelling, grading and ramming of bottoms, dewatering ofaccumulated water from any source and keeping thesurface dry for subsequent works and stacking ofexcavated material within a lead of 2.0 KM or disposal, asdirected including providing temporary supports toexisting service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 70 210 M2

Shoring and Strutting by Open Timbering (Square meter) _________________________________________________________________

SHORING AND STRUTTING _Providing and installing approved type of "SHORING ANDSTRUTTING" by open timbering method for all depths toretain earth including dismantling and removal of thesame etc. from site after completion of work etc. allcomplete as directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 150 M2

Shoring and Strutting by Close Timberin (Square meter) _________________________________________________________________

Providing and installing approved type of "SHORING ANDSTRUTTING" by close timbering method for all depths toretain earth including dismantling and removal of thesame etc. from site after completion of work etc. all



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________complete as directed _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 100.000 M3

BACKFILLING (Cubic meter) _________________________________________________________________

Backfilling after exceution of work_BACKFILLING after execution of the WORK to propergrade and level with selected materials from availableexcavated soil from spoil heaps within a LEAD OF2.0KM,including re- excavating the deposited soilexcavated earlier, breaking clods, laying at all depths andheights in layers of thickness not exceeding 15 Cms.watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% laboratorymaximum dry density, dressing, trimming etc. infoundations, plinths, trenches, pits etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 100 150.000 M3

EARTHWORK FILLING owner (Cubic meter) _________________________________________________________________

Earthwork Filling by excavation_EARTHWORK IN FILLING by excavating the earth fromBORROW AREAS arranged by OWNER within a lead OF3.0KM transporting the earth from borrow area includingcleaning & stripping the earth at borrow areas, breakingclods, loading, unloading and laying at all depths andheights in layers of thickness not exceeding 15 cms.,watering, rolling and ramming by manualmethods/mechanical compactors to achieve 90% of themaximum laboratory dry density, dressing, trimming,levelling the top surface etc. in foundations, plinths,trenches etc. all complete _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 400.000 M3

EARTHWORK FILLING contractor (Cubic meter)




_________________________________________________________________EARTHWORK IN FILLING by excavating the earth fromBORROW AREAS arranged by CONTRACTOR for allleads, transporting the earth from borrow area includingcleaning & stripping the earth at borrow areas, breakingclods, loading, unloading and laying at all depths andheights in layers of thickness not exceeding 15 cms.,watering, rolling and ramming by manualmethods/mechanical compactors to achieve 90% of themaximum laboratory dry density, dressing, trimming,levelling the top surface etc. in foundations, plinths,trenches etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 1,000.000 M3

SURPLUS EARTH AND DEBRIS (Cubic meter) _________________________________________________________________

Transporting & Disposing the SURPLUS EARTH AND DEBRIS_Transporting and disposing the SURPLUS EARTH ANDDEBRIS including shrubs and vegetations fromconstruction areas to areas ANYWHERE OUTSIDE THEPLANT BOUNDARY, including re-excavating thedeposited soil excavated earlier, loading, transportation,unloading, laying at all depths and heights, stacking,levelling and dressing both the area (viz. from where theearth is transported and where it is deposited) to requiredlevels and slopes complete with all lifts as directed. Basisof measurement shall be volume of the stackedexcavated material/debris (volume of stack reduced by30% for voids). DISPOSAL AREAS OUTSIDE PLANTBOUNDARY TO BE ARRANGED BY THECONTRACTOR. Royalty etc. as applicable for disposaloutside plant limits to be borne by the Contractor _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 75.000 M3

PLAIN CEMENT CONCRETE M20 (Cubic meter) _________________________________________________________________

PLAIN & REINFORCED CEMENT CONCRETE: (REFERSPECIFICATION NO. 6-68-0004) _PCC - Non FIM Items_



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Providing and laying PLAIN CEMENT CONCRETE for alldepths below and upto plinth level in foundations,drains,fillings, non-suspended floors, pavements & ramps or anyother works etc. including shuttering, tamping, ramming,vibrating, curing, etc. all as specified in any shape,position, thickness and finishing the top surface rough orsmooth as specified and directed all complete forconcrete grade M20 with 20mm and down size gradedcrushed stone aggaregates/Gravels.ALL MATERIALSINCLUDING CEMENT SUPPLIED BY THECONTRACTOR._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 140 50.000 M3

RCC SuBstructures - Non FIM Item (Cubic meter) _________________________________________________________________

RCC Substrutures - Non FIM Items_Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUBSTRUCTUREe.g. foundations, raft, beams, slabs, pilecaps, retaining walls, dyke walls, jambs, counterforts,buttresses, pedestals, pipe sleepers, columns,suspended floors, staircases, landings, steps, bracketsetc., including equipment/ machine foundations &pedestals viz. compressors, ID & FD fans, pumps,generators, crushers, mills, etc., (including single pourconcreting as specified on the drawing), applying cementwash on concrete surface (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering, etc., wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING & SPECIFIEDADMIXTURES) for all depths below and upto plinth levelin any shape, position and thickness etc. all complete asspecified, shown and directed. ALL MATERIALSINCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




150 500.000 M3 RCC SuBstructures - Non FIM Item (Cubic meter)

_________________________________________________________________Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUBSTRUCTUREe.g. trenches, culverts, manholes, pipeencasement, catchpits, drains, pits, etc., applying cementwash on concrete surface (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering, etc., wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING & SPECIFIEDADMIXTURES) for all depths below and upto plinth levelin any shape, position and thickness etc. all complete asspecified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 400.000 M3

RCC Superstructures - Non FIM Item (Cubic meter) _________________________________________________________________

RCC Superstructures - Non FIM Items_Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUPERSTRUCTURE in suspended floors, slabs, beams,columns, walls including counterforts, staircases,landings, steps, facias, fins, mouldings, gutters, shelves,window sills, canopies, lintels, girders, ducts, brackets,chajjas with drip moulds, pedestals, posts, struts,equipment/ machine foundations, ramps etc. (includingsingle pour concreting as specified on the drawing),providing cement wash (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING AND SPECIFIEDADMIXTURES) FOR ALL HEIGHTS UPTO &INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in anyshape, position, thickness etc. all complete as specified,shown and directed. ALL MATERIALS INCLUDING



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CEMENT SUPPLIED BY THE CONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 15.000 M3

RCC Flooring - Non FIM ItemS (Cubic meter) _________________________________________________________________

RCC Flooring - Non FIM Items_Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20mm and down sizegraded crushed stone aggregates/ gravel in NONSUSPENDEDslabs/pavement slabs including pedestals,ramps etc. leaving pockets, laying in alternate panels torequired slopes, all necessary form work and finishing thetop surface rough or smooth, including cost of admixturesif used, providing pockets, openings, recesses chamfering etc., whereverrequired, vibrating, tamping,curing and rendering if required to give a smooth andeven surface etc. (excluding the Cost of Reinforcementand Shuttering) for all depths below and upto plinth levelin any shape, position and thickness etc. all complete asspecified, shown and directed. All materials includingcement supplied by the contractor. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 130.000 M3

Precast Elements - Non FIM Items (Cubic meter) _________________________________________________________________

Precast Elements - Non FIM Items_Manufacturing, transporting, supplying and erecting inposition Reinforced Cement Concrete PRECASTELEMENTS such as columns, beams, cover slabs,lintels, louvers, fins, shelves etc. of M-35 grade with20mm and down size graded crushed stoneaggregates/gravel, each unit upto and inclusive of 500 kg.for all leads, levels, shapes and thickness including allmoulds, shuttering and centering, vibrating, tamping,curing, chamfering wherever required, finishing the topsurface with cement mortar 1:3 ( 1 Cement : 3 Sand) togive a smooth and even surface, or non skid finish asspecified, providing lifting hooks, metal inserts, makingholes pockets, (only M.S. inserts to be measured & paid



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________separately) transporting to site, erecting, levelling,aligning and fixing in position with cement mortar 1:3 (Cement : 3 Coarse Sand), breaking bricks and/orconcrete surfaces and making good the same etc. allcomplete (excluding the Cost of Reinforcement ) and asdirected. All materials including cement supplied by the CONTRACTOR _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 110.000 MT

HYD Bars / MS Bars - Non FIM Items (Tonnes) _________________________________________________________________

HYD Bars / MS Bars - Non FIM Items_Supplying and placing in position HIGH YEILDSTRENGTHDEFORMED STEEL BARSREINFORCEMENT of Grade Fe500 (D) conforming toIS:1786, for RCC work including transporting the Steel, straightening,cleaning, decoiling, cutting, bending torequired shapes and lengths as per details, binding with18 SWG black soft annealed binding wire at everyintersection, supplying and placing with proper coverblocks, supports, chairs, overlaps, welding, spacers,fanhooks etc. for all heights and depths etc. all completeas directed. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 5.000 M3

Conc. Encasing - Non FIM Items (Cubic meter) _________________________________________________________________

Conc. Encasing - Non FIM Items_Providing and laying Reinforced Cement Concrete ofgrade M-20 with 20mm and down size graded stoneaggregates for ENCASING OF STRUCTURAL STEELWORK including chamfering wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (excluding the cost ofReinforcement and Shuttering) for all heights and depthsin any shape, position, and thickness etc. all complete asspecified and shown. Cement. All materials supplied bythe contractor.

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 4,000 M2

Centering and Shuttering - Non FIM Items (Square meter) _________________________________________________________________

Centering and Shuttering - Non FIM Items_Providing and fixing CENTERING AND SHUTTERING infoundations, footings,raft beams, slabs, pile caps,retaining walls, jambs, counter-forts, buttresses, trenches,equipment/machine foundations, pedestals, abutments,pipe sleepers, columns, plinth beams, lintels, suspendedslabs, beams, staircases, landings, steps, non-circulartunnels/bunkers/ silos/ shafts/ hoppers/liquid storagestructures etc. for all depths below and upto & inclusive ofplinth level including shuttering for single pour concreting,strutting, bracing, propping etc., keeping the same inposition during concreting and removal of the same afterspecified period etc. for Straight/ Inclined Shuttering, keeping necessaryprovision for inserts, projectingdowels, anchor bolts or any other fixture etc. all completeand as specified and directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 1,400 M2

Centering and Shuttering (Square meter) _________________________________________________________________

Providing and fixing CENTERING AND SHUTTERING insuperstrctures in retaining walls, jambs, counter-forts,buttresses, equipment/ machine foundations,abutments,columns, lintels, suspended slabs, beams,staircases, landings, steps, non-circular tunnels/ bunkers/silos/ shafts/ hoppers/ liquid storage structures etc. for allheights above plinth level including shuttering for singlepour concreting, strutting, bracing, propping etc., keepingthe same in position during concreting and removal of thesame after specified period etc. for Straight/ InclinedShuttering, keeping necessary provision for inserts,projecting dowels, anchor bolts or any other fixture etc. allcomplete and as specified and directed. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 730.000 MT

General Steel Works - Non FIM Items (Tonnes) _________________________________________________________________

STRUCTURAL STEEL WORKS (REFERSPECIFICATION NO. 6-68-0006) _General Steel Works - Non FIM Items_Supplying, transporting, storing, fabricating & erecting inposition and testing/ examining bolted and/ or weldedSTRUCTURAL STEEL WORKS of Grade E250A/E250BR (confirming to per IS:2062) at all locations andlevels UPTO & INCLUSIVE OF 45 m ABOVE HPP/ FGL,including all builtup sections/ compound sections madeout of rolled sections and/or plates/ bent plates in alltypes of structural frameworks, floor beams, stairs, orany other structural items or accessories to supportequipments, piping, conveyor galleries, towers, masts,etc., but excluding silos, bunkers, hoppers, etc., cutting torequired size, straightening/ bending if required, edgepreparation, cleaning, preheating, bolting/ welding ofjoints, (including sealing the joints of box sections with continuous weldingand plugging any open ends & holesof box sections), finishing edges by grinding, fixing in lineand level with temporary staging & bracing and removalof the same after erection, grouting with Ordinary Grout orpremix free flow Nonshrink Grout as specified,including preparation and submission of detailedfabrication drawings, preparing the surface for paintingand applying shop primer (system-1) as per BPCLpaiting Specification AE-S-5430 after fabricationetc.FOR ALL HEIGHT UPTO & INCLUSIVE OF 45 mABOVE HPP/FGL, ALL COMPLETE. SUPPLY OF ALLMATERIAL IN CONTRACTOR'S SCOPE. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 725.000 MT

Painting - Non FIM Items (Tonnes) _________________________________________________________________

Painting - Non FIM Items_Supplying and applying FIELD PAINT SYSTEM of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________approved quality and shade including a coat of primer asper system 1 & 11 (for temperature upto 100 °C) ofBPCL Specification AE-S-5430 over the coat of shopprimer already applied, including storage, surfacepreparation, degreasing, cleaning, drying, providingnecessary arrangement for access, testing etc. includingtouching up of shop primer coat as per abovespecification, for steel structures at all levels andlocations, all complete as specified, for UNIT/OFFSITEareas considering HIGHLY CORROSIVE Environment.SUPPLY OF ALL MATERIAL IN CONTRACTOR'SSCOPE _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 3.000 MT

Anchor Bolts - Non FIM Items (Tonnes) _________________________________________________________________

MISCELLANEOUS STEEL WORKS (REFERSPECIFICATIONS NO. 6-68-0008) _Anchor Bolts - Non FIM Items_Supplying, fabricating, fixing and keeping in position at alllevels and locations THREADED ANCHOR BOLTS of alldiameters and nomenclature including nuts, washers, anchor plates, pipesleeves etc. in foundations, columns,pedestals, slabs, beams, walls etc. or any other place asdirected including handling & transporting, straightening ifrequired, turning from relevant size M.S. rounds torequired diameter, threading, welding, providingnecessary templates and auxilliary dummy structures, ifany, necessary tying and welding with reinforcement,adjustment of shuttering & reinforcement/any otherfixture, greasing exposed metal surfaces, covering boltsand packing the sleeves with jute cloth etc. all completeas specified and directed.(SUPPLY OF ALL MATERIALSIN CONTRACTOR'S SCOPE)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 1.000 MT

MS Metal Inserts - Non FIM Items (Tonnes) _________________________________________________________________

MS Metal Inserts - Non FIM Items_



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Supplying, transporting, storing, fabricating and fixing inposition M.S. METAL INSERT (with lugs) of any shapemade out of flats, plates, rolled sections, pipes etc.providing necessary templates, staging, cutting,straightening, if required, bolting, welding as required andembedding in position on both Plain and ReinforcedCement concrete members inclusive of adjustingshuttering & reinforcement/ any other fixture, weldingwhere necessary, tying and holding to correct level, lineand position, any auxiliary dummy structures to supportthe heavy inserts, painting exposed surfaces with a coatof primer as per BPCL Painting Specification No. AE-S-5430, etc. all complete for all depths and heights asspecified and directed. (SUPPLY OF ALL MATERIALS INCONTRACTOR'S SCOPE). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 2.500 MT

MS Chequered Plates - Non FIM Items (Tonnes) _________________________________________________________________

MS Chequered Plates - Non FIM Items_Supplying, fabricating and erecting in position at all levelsand locations bolted, screwed and/or welded M.S.CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, anyother place as directed etc.including cutting to required size, shape, making holes,notches, openings of required size, nosing, straighteningif required, making the edges smooth, removing theburrs, fixing, welding, preparation and submission offabrication drawings and preparing the surfaces forpainting and applying shop primer as per BPCL paintingspecification AE-S-5430 etc., after fabrication etc. allcomplete as specified and directed. (SUPPLY OF ALLMATERIALS IN CONTRACTOR'S SCOPE). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 15.000 MT

MS Grating Cat. A,B - Non FIM Items (Tonnes) _________________________________________________________________

MS Grating Cat. A,B - Non FIM Items_Supplying, fabricating and erecting in position at all levels



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and locations ELECTROFORGED GALVANISEDGRATING (purchased from approved manufacturer bythe Contractor) conforming to BPCL Standard includingcutting to required size, shape, making holes, notches,openings of required size, nosing, straightening ifrequired, making the edges smooth, removing the burrs,fixing with manufacturer's supplied galvanised clamps,preparation and submission of fabrication drawings, allcomplete as specified and directed (SUPPLY OF ALLMATERIALS IN CONTRACTOR'S SCOPE). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 100 EA

Rust Proof Fasteners - Non FIM Items (each) _________________________________________________________________

Rust Proof Fasteners - Non FIM Items_Supplying, handling, transporting to site of work and fixingapproved RUSTPROOF EXPANSION FASTENERSM.S.bolts of medium duty upto & inclusive of 16mm dia.at specified positions on concrete floors, roofs, beams(sides and bottom), walls, columns etc. according tomanufacturer's specifications including all accessorieslike nuts, washers etc. of required size., testing,necessary scaffolding, drilling of the holes in concretesurface with electric drill cleaning and making good anydamage done to the structure etc. all complete for all heights, depths andlocations as specified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 100 EA

RUSTPROOF EXPANSION FASTENERSmedium duty (each) _________________________________________________________________

Supplying, handling, transporting to site of work and fixingapproved RUSTPROOF EXPANSION FASTENERSM.S.bolts of medium duty beyond 16mm dia. upto &inclusive of 25mm dia.at specified positions on concretefloors, roofs, beams (sides and bottom), walls, columnsetc. according to manufacturer's specifications includingall accessories like nuts, washers etc. of required size,testing, necessary scaffolding, drilling of the holes inconcrete surface with electric drill cleaning and making



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________good any damage done to the structure etc. all completefor all heights, depths and locations as specified and directed _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 100 EA

RUSTPROOF EXPANSION FASTENERS heavy duty (each) _________________________________________________________________

Supplying, handling, transporting to site of work and fixingapproved RUSTPROOF EXPANSION FASTENERSM.S.bolts of heavy duty beyond 16mm dia. upto &inclusive of 25mm dia.at specified positions on concretefloors, roofs, beams (sides and bottom), walls, columnsetc. according to manufacturer's specifications includingall accessories like nuts, washers etc. of required size,testing, necessary scaffolding, drilling of the holes inconcrete surface with electric drill cleaning and makinggood any damage done to the structure etc. all completefor all heights, depths and locations as specified and directed _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 1,150 M

Hand Railing 1000mm - Non FIM Items (Meter) _________________________________________________________________

Hand Railing 1000mm - Non FIM Items_Supplying, fabricating and fixing in position at all locations1000mm high HAND RAILING (for staircases) consistingof top rail, mid rail and vertical posts as per BPCLStandard No. FSK-2690 including straightening ifrequired, cutting, bending, welding, bolting, grouting withordinary grout, cleaning, surface preparation, hot-dipgalvanising (80-85 micron as per IS:4759, IS:2629, IS:4736, IS:2633), shopprimer as per BPCL Paintingspecification no. AE-S-5430, preparation and submissionof fabrication drawings etc. all complete as specified,shown and directed. (SUPPLY OF ALL MATERIALS INCONTRACTOR'S SCOPE). (Complete handrail workshall be measured as length of top rail only and not lengthof each element fixed). _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 2.000 M3

Brickwork - Non FIM Items (Cubic meter) _________________________________________________________________

Brickwork - Non FIM Items_Demolishing BRICKWORK (taking all necessary safetyprecautions) for all depths below plinth level includingsupply of all tools and tackles, necessary scaffolding,propping, underpinning, cleaning and stacking ofserviceable materials and depositing at BPCL scrap yard,disposal of unserviceable to outside of refinery keepingBPCL indemnified of any liability and /or complains fromlocal authorities /municipal body all complete at all depthsand heights, as specified and directed (Excavation &backfilling shall be paid separately under relevantitems)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 1.000 M3

Brickwork - Non FIM Items (Cubic meter) _________________________________________________________________

Demolishing BRICKWORK (taking all necessary safetyprecautions) for all heights above plinth level includingsupply of all tools and tackles, necessary scaffolding,propping, underpinning, cleaning and stacking ofserviceable materials and depositing at BPCL scrap yard,disposal of unserviceable to outside of refinery keepingBPCL indemnified of any liability and /or complains fromlocal authorities /municipal body all complete at all depthsand heights, as specified and directed _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 15.000 M3

RCC - Non FIM Item (Cubic meter) _________________________________________________________________

RCC - Non FIM Items_Demolishing RCC WORK (taking all necessary safety precautions) for all depths



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________below plinth level includingsupply of all tools &tackles, necessary scaffolding,propping, underpinning etc., cutting, straightening,scraping and cleaning of reinforcement bars , stackingof serviceable materials and depositing at BPCL scrapyard, disposal of unserviceable to outside of refinerykeeping BPCL indemnified of any liability and /orcomplains from local authorities /municipal body allcomplete at all depths and heights, as specified anddirected.(Excavation & backfilling shall be paidseparately under relevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 20.000 M3

Demolishing RCC WORK (Cubic meter) _________________________________________________________________

Demolishing RCC WORK (taking all necessary safetyprecautions) for all heights above plinth level includingsupply of all tools &tackles, necessary scaffolding,propping, underpinning etc., cutting, straightening,scraping and cleaning of reinforcement bars , stackingof serviceable materials and depositing at BPCL scrapyard, disposal of unserviceable to outside of refinerykeeping BPCL indemnified of any liability and /orcomplains from local authorities /municipal body allcomplete at all depths and heights, as specified anddirected.(Excavation & backfilling shall be paidseparately under relevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 200 M2

Chipping of RCC WORK (Square meter) _________________________________________________________________

Chipping of RCC WORK (taking all necessary safetyprecautions) by CHISELLING, upto & inclusive of 25mmthickness including supply of all tools & tackles,necessary scaffolding, propping, underpinning etc.,cutting, lapping/welding of reinforcement bars as perdrawings, disposal of the unserviceable material to spoilheaps anywhere within the plant boundary, all complete atall heights and depths, as specified and directed.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(Excavation and backfilling shall be paid separately underrelevant items)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 100 M2

Chipping of RCC WORK (Square meter) _________________________________________________________________

Chipping of RCC WORK (taking all necessary safety precautions) by CHISELLING,beyond 25mm and upto &inclusive of 50mm thickness including supply of all tools &tackles, necessary scaffolding, propping, underpinningetc., cutting, lapping/welding of reinforcement bars as perdrawings, disposal of the unserviceable material to spoilheaps anywhere within the plant boundary, all complete atall heights and depths, as specified and directed.(Excavation and backfilling shall be paid separately underrelevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 25 EA

Pockets - Non FIM Items (each) _________________________________________________________________

Pockets - Non FIM Items_Making POCKETS/HOLES of sizes upto & inclusive of200 x200x500mm in RCC/PCC works (taking allnecessary safety precautions) by chiselling/drilling,including supply of all tools & tackles, necessaryscaffolding etc. cutting of reinforcement bars, cleaning thepockets of all debris, disposal of the unserviceablematerial to spoil heaps anywhere within the plantboundary all complete at all heights & depths as specifiedand directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 5.000 MT

Steelwork - Non FIM Items (Tonnes) _________________________________________________________________

Steelwork - Non FIM Items_



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Dismantling bolted/rivetted/welded STRUCTURALSTEEL WORK of all descriptions (taking all necessarysafety precautions), including supply of all tools andtackles, consumables, necessary scaffolding etc.,providing temporary bracings as required, cutting (byflame or saw) gusset plates, bolts, nuts, weldings etc.,transporting and stacking of the serviceable materials,cleaning the site of work of all unserviceable materials fordisposal to spoil heaps anywhere within the plantboundary, all complete at all depths and heights, asspecified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 410 25.000 M3

Sand Filling - Non FIM Items (Cubic meter) _________________________________________________________________

MISCELLANEOUS ITEMS (REFER SPECIFICATIONNO. 6-68-0013) _Sand Filling - Non FIM Items_Supplying and filling approved SAND of specified qualityunder floors, in foundations, plinths, tank foundations etc.for all depths and heights including cost of sand,royalties,transportation to site for all leads and lifts,includingloading, unloading, spreading in layers of loose thicknessnot exceeding 150 mm,watering,ramming,compactingwith mechanical compactors and/or other equipment tothe specified levels to achive 85% relative density as perIS:2720 Part XIV,including preparation of subgrade to therequired slope,providing testing apparatus and testing thedegree of consolidation all complete as per drawings,specifications and direction of Engineer-in-charge.Therates shall be inclusive of the cost of alllabour,material,equipments etc. all complete _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 420 150.000 KG

BI-POLAR CONCRETE PENETRATING (Kilogram) _________________________________________________________________

BI-POLAR CONCRETE PENETRATING CORROSIONINHIBITING ADMIXTURESupplying and mixing of approved brand of BI-POLAR



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CONCRETE PENETRATING CORROSION INHIBITINGADMIXTURE in concrete as per manufacturer'sspecification for protection of reinforcement againstcorrosion. Supply of admixture in Contractor's scope. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 430 50.000 KG

Epoxy Resin - non FIM Items (Kilogram) _________________________________________________________________

BONDING FRESH CONCRETE TO OLD CONCRETEBY EPOXY RESIN BONDING SYSTEM (REFERSPECIFICATION NO. 6-68-0056) _Epoxy Resin - non FIM Items_Providing and applying approved EPOXY RESIN(prepared as per manufacturer's recommendation) forbonding of fresh concrete to old concrete in all types ofstructure at all depths and heights including cleaning ofconcrete surface, removing of all loose concrete pieces,making rough by chiselling, taking off the skin of concrete, application ofEpoxy Resin System by spraying,necessary working platforms, props, scaffolding and othersafety measures, removal of same after completion etc.all complete as specified and directed. (Excavation,backfilling, removal of surplus earth, keeping pit dry bypumping/bailing subsoil water shall be paid separatelyunder relevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 440 150 M2

Concrete - Non FIM Items (Square meter) _________________________________________________________________

PASSIVE FIREPROOFING OF STEEL STRUCTURES(REFER SPECIFICATION NO. 6-68-0033)Concrete - Non FIM ItemsSupply and laying of concrete of grade M30 as per Type-Iof EIL Standard Specification 6-68-0033 as fire proofingmaterial with 10 mm and down size graded coarse andfine aggregates including admixture around structuralsteel members (viz. beams, columns, bracings etc.) allcomplete; cleaning the steel surfaces, supplying, placingand fixing in position cover plates conforming to IS:2062



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and stiffeners for members exceeding 600 mm depth,supply and welding of MS nuts on angle and boxsections and cover blocks for other sections, supplying,placing and fixing in position galvanized expanded metalsheet with mesh size 4.5 mm x 13.5 mm conforming toIS:412 except on angle and box sections, hot dippedgalvanized welded wire fabric reinforcement 2 mm dia 50mm x 50 mm mesh conforming to IS:1566, and tying thereinforcement to the cover blocks with galvanized 16SWG tying wire, including cutting, straightening, cleaning,bending, vibrating, tamping, curing or providing a layer ofapproved membrane of curing compound, rendering withcement sand mortar (1:3) wherever required to achieve asmooth and even surface, providing L50x50x6 at cornersor as specified in the drawing, applying primer on MSnuts, angles and affected surfaces, supplying and layingof non-bituminous polysulfide or silicon rubber mastic sealant at terminatingedges/ metal joints, painting thesurfaces with sealer coat of epoxy polyamide as base andfinish coats of coating system No.1 of NORSOK StandardM-501, including the cost of all labour, materials,specified tests, shuttering, staging, scaffolding, workingplatforms, approaches, etc. for all shapes and positions atall heights upto & including 10 m above pavement etc. allcomplete as per specifications and directions ofEngineer-in-Charge. (ALL MATERIALS INCLUDINGCEMENT TO BE SUPPLIED BY THE CONTRACTOR). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 450 300 M2

Vermiculite Concrete Non-FIM Items (Square meter) _________________________________________________________________

Vermiculite Concrete for Structural Steel - Non-FIM ItemsSupply and laying of vermiculite based lightweightcementitious concrete coating as per Type-II of EILStandard Specification 6-68-0033 as fire proofing materialof required thickness around structural steel members(viz. beams, columns, bracings etc.) for the required fireprotection from reaching temperature 538 degree C;cleaning the steel surfaces and applying primercompatible to vermiculite material if required as permanufacturer specifications, supplying, placing and fixingin position cover plates conforming to IS:2062 andstiffeners for members exceeding 600 mm depth, supply



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and welding of MS nuts on angle and box sections andcover blocks for other sections, supplying, placing andfixing in position galvanized expanded metal sheet withmesh size 4.5 mm x 13.5 mm conforming to IS:412except on angle and box sections, hot dipped galvanizedwelded wire fabric reinforcement 2 mm dia 50 mm x 50mm mesh conforming to IS:1566, and tying thereinforcement to the cover blocks with galvanized 16SWG tying wire, including cutting, straightening, cleaning,bending, applying primer on MS nuts and affectedsurfaces, curing or providing a layer of approvedmembrane of curing compound, patching of damagedportion wherever required to achieve a smooth and even surface, providingchamfering at corners, supplying andlaying of non-bituminous polysulfide or silicon rubbermastic sealant at terminating edges/ metal joints, paintingthe surfaces with sealer coat of epoxy polyamide as baseand finish coats of coating system No.1 of NORSOKStandard M-501, including the cost of all labour,materials, specified tests, shuttering, staging, scaffolding,working platforms, approaches, etc. for all shapes andpositions at all heights upto & including 10 m abovepavement etc. all complete as per specifications anddirections of Engineer-in-Charge. (ALL MATERIALSSHALL BE SUPPLIED BY THE CONTRACTOR). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 460 800 M2

Vermiculite Concrete Non-FIM Items (Square meter) _________________________________________________________________

Supply and laying of vermiculite based lightweightcementitious concrete coating as per Type-II of EILStandard Specification 6-68-0033 as fire proofing materialof required thickness around structural steel members(viz. beams, columns, bracings etc.) for the required fireprotection from reaching temperature 538 degree C;cleaning the steel surfaces and applying primercompatible to vermiculite material if required as permanufacturer specifications, supplying, placing and fixingin position cover plates conforming to IS:2062 andstiffeners for members exceeding 600 mm depth, supplyand welding of MS nuts on angle and box sections andcover blocks for other sections, supplying, placing andfixing in position galvanized expanded metal sheet with



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________mesh size 4.5 mm x 13.5 mm conforming to IS:412except on angle and box sections, hot dipped galvanizedwelded wire fabric reinforcement 2 mm dia 50 mm x 50mm mesh conforming to IS:1566, and tying thereinforcement to the cover blocks with galvanized 16SWG tying wire, including cutting, straightening, cleaning,bending, applying primer on MS nuts and affectedsurfaces, curing or providing a layer of approvedmembrane of curing compound, patching of damagedportion wherever required to achieve a smooth and even surface, providingchamfering at corners, supplying andlaying of non-bituminous polysulfide or silicon rubbermastic sealant at terminating edges/ metal joints, paintingthe surfaces with sealer coat of epoxy polyamide as baseand finish coats of coating system No.1 of NORSOKStandard M-501, including the cost of all labour,materials, specified tests, shuttering, staging, scaffolding,working platforms, approaches, etc. for all shapes andpositions at all heights more than 10 m above pavementetc. all complete as per specifications and directions ofEngineer-in-Charge. (ALL MATERIALS SHALL BESUPPLIED BY THE CONTRACTOR). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 470 315 M2

Vermiculite Concrete for Equipments (Square meter) _________________________________________________________________

Vermiculite Concrete for Equipments - Non-FIM ItemsSupply and laying of vermiculite based lightweightcementitious concrete coating as per Type-III of EILStandard Specification 6-68-0033 as fire proofing materialof required thickness on equipment/ vessel skirts,saddles and supports for the required fire protection fromreaching temperature 427 degree C; cleaning the steelsurfaces and applying primer compatible to vermiculitematerial if required as per manufacturer specifications,supplying, placing and fixing in position cover platesconforming to IS:2062, hot dipped galvanized welded wirefabric reinforcement of 2 mm dia 50 mm x 50 mm meshconforming to IS:1566 and tying the reinforcement withthe pre welded nuts by galvanized 16 SWG tying wire,including straightening, cutting, bending of thereinforcement, including supplying and welding ofadditional MS nuts if directed by the Engineer-in-charge,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________applying primer wherever required, curing or providing alayer of approved membrane of curing compound,patching of damaged portion wherever required toachieve a smooth and even surface, providingchamfering at corners, supplying and laying of nonbituminouspolysulfide or silicon rubber mastic sealant at terminating edges/ metaljoints, painting the surfaces withsealer coat of epoxy polyamide as base and finish coatsof coating system No.1 of NORSOK Standard M-501,including the cost of all labour, materials, specified tests,shuttering, staging, scaffolding, working platforms,approaches, etc. for all shapes and positions. allcomplete as per specifications and directions ofEngineer-in-Charge. (ALL MATERIALS SHALL BESUPPLIED BY THE CONTRACTOR). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 480 2,200 M2

DECKING PLATES-NON FIM ITEM (Square meter) _________________________________________________________________

MiscellaneousDECKING PLATES-NON FIM ITEMSupplying ,fabrication and erecting in position at alllevels and locations bolted,screwed and/or welded M.SDECK PLATES(Pre-painted Galvanized profiled coldformed panal to be used as permanent shutteringplateleaving it in place) of 1.0 mm thickness below RCCslabs or any other place as directed including cutting,mitering, laps providing cut outs for fixing accessories,necessary fasteners(approved quality anticorrosivepolymer coated, rivets, nut,bolts, hooks etc all corrosionproof polymer capping & washers) etc. all complete asspecified and directed. (SUPPLY OF ALL MATERIALS INCONTRACTOR'S SCOPE).for casting of reinforced concrete slab and subsequently _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 490 1.500 MT

High strength structural bolts (Tonnes) _________________________________________________________________

High strength structural bolts-NON FIM ITEM



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Providing, supplying and fixing in position of Highstrength structural bolts (of property class 8.8 andproduct grade 'C' as per IS: 1367) and conforming to IS:3757 and high strength structural hardened and tempered nuts (of propertyclass '8' as per IS: 1367) conformingto IS: 6623 with hardened and tempered washers asper IS: 6649 etc. up to and inclusive of 39 mm diameterand upto 300 mm long for structural steel work etc allcomplete. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 500 5,000 M2

Painting U/G RCC WORK (Square meter) _________________________________________________________________

Painting U/G RCC WORKSupplying and applying two coats of High Build Coal Tarepoxy cured with polyamine hardner @ 125microns (Twopack Polyamine cured epoxy resin blended with coal tarmedium,suitably blended) to achieve a total DFT of 250microns as per Painting Specification no.A269-147-06-42-SPC-03 for underground RCC structure etc. allcomplete as specified and directed _________________________________________________________________



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ Grand Total (inclusive of all taxes, duties/charges etc) In figure: In Words :

_______________________________________________________________________



TERMS & CONDITIONS_______________________________________________________________________ Important Notice_______________________________________________________________________ Sr.No Description_______________________________________________________________________ 001 Quotation received after due date will not be entertained

002 Your quotation must specify exact amount or percentage discount, Excise, S.T., Charges, Transport, Packing & forwarding, Octroi, etc. as applicable.

003 In case you are unable to quote, kindly send the quotation with a regret for our records. Non-receipt of a regret will adversely affect your vendor rating.

004 No quotation will be accepted without your rubber stamp and signature.

005 Your quotation must be strictly in enclosed envelope indicating Collective RFQ No., RFQ No. and due date.

006 For all future correspondences please mention the vendor code Collective RFQ Number & RFQ Number.

007 Retention Money 10 % shall stand deducted from each and every running bill submitted in the event of contract is awarded.

LIST OF ENCLOSURES

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)


-------Tear off Portion to be pasted on the envelope containing offer------------_______________________________________________________________________

Collective RFQ No. : 1000245132

Our Reference: Due Date : 15.12.2015RFQ No. : 6000887598 Due Time : 14:00:00Subject: BALANCE CIVIL / STRUCTURAL, MECHANICAL, PIPING, INSULATION & PAINTING WORKSFOR

To,

Purchase Group : N47-TGTU SER PROC_______________________________________________________________________

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)
