HT-2

The Indigo HT is a durable, hydraulically tiltable transporter. This transporter can be put to quick and versatile use to transport a wide range of rolling machines, cars, and other vehicles.

Thanks to the continuous tailboard (with a height of 1000 mm) it becomes a piece of cake to load and unload 3 or 4-wheel machines. When used for the transportation of cars, this model can be provided with loading skids with a length of 2000 or 2500 mm (mounted underneath the vehicle) instead of a tailboard. To safely transport cars with a very slight clearance underneath, loading skids with a length of 3500 mm are available. In short: with this Indigo, you can transport virtually anything!

TransportersHT-2, HT-3

TRANSPORTERS

INDIGO HT: EFFICIENT USE OF THIS TRANSPORTING ALLROUNDER

1 2

6 7543

111098 12

16151413

WWW.HAPERT.COM

All Hapert trailers have been provided with the TÜV certified load-securing system!

STANDARDS, OPTIONS, AND ACCESSORIES

TRANSPORTERS Standard: with double functioning hydraulic tilting system, adjustable winch with winch support, 3.5-ton overrun brake and a fixed Combi Protect Rail with a height of 80 mm.

Standard: provided with TÜV-certified binding brackets, integrated in the side rail, with a capacity of 1000 daN each.

Option: wheel chock for model with 2 tracks with perforated structure.

Option: aluminium dropsides with a height of 300 mm instead of Combi Protect Rail.

Option: removable wire-mesh rack with a height of 700 mm, on the sides and the front.

Option: floor with open antiskid tread-grate structure instead of plywood floor.

Option: models with a length of 4550 mm and 5050 mm with aluminium boards are, as a standard, provided with removable centre posts.

Option: various closed superstructures available, for example with side doors, dropsides, or aluminium rolling or sliding hatches.

Option: closed superstructure, as a standard with tail ramp with a length of 1000 mm hinged downward, and upper part hinged upward.

Option: The models 5050 x 2000 mm and 5050 x 2200 mm are available with 3 axles.

Option: with raised cover construction.

Option: 2x drive-on tracks with perforated structure and a width of 600 mm instead of a plywood floor.

Option: aluminium loading skids available in different sizes instead of a continuous tailboard.

Option: the hinged Combi Protect Rail has a height of approx. 110 mm (interior dimensions have a width that is approx. 50 mm less).

Option: adjustable wheel chock model Combi Protect Rail, including 2x black, movable chocks.

Option: floor comprising aluminium profiles.