View
239
Download
11
Tags:
Embed Size (px)
DESCRIPTION
http://www.ledasecurity.com.au/media/pdfs/page_management/Industrial-doors-and-docks.pdf
Citation preview
Doors + Loading Dock Products Handbook
Australias largest range | Total dock package | Design a solution
Edition 2, 2014
www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ T
he
Le
da
Ad
van
tag
e ]
The Leda Advantage
About UsLeda is a market leader in the design and manufacture of logistics equipment and entrance control products.
Leda maintains an absolute commitment to quality and has developed special manufacturing methods and equipment to ensure a consistently high quality standard for all its products.
The Leda Advantage Innovative products
Stylish contemporary designs
High vandal resistance
Reliable and low maintenance
Cost efficient
Superior installation methods
Unparalleled technical advice with product choice and specification
QualityAs part of its policy of ongoing improvement, Leda works continually to advance the effectiveness and efficiency ofall its products.
When selecting or specifying from within this handbook, it is advisable to consult directly with Leda to ensure that specifications have not been altered.
Leda can also advise on the suitability of your dock or door selection for the proposed application.
ServiceEvery Leda client is guaranteed unrivalled service,advice and technical support. Products are distributed and supported through branch offices or distributors throughout Australia and New Zealand.
WarrantyAll Leda products carry a full comprehensive 12 month warranty.
Optional warranty extensions are also available if and when Preventative Maintenance Contracts (PMC) are entered into.
Materials and FinishesMost Leda products are available in a pre-primed painted finish or galvanised mild steel. Leda utilises its own robotic cutting / welding and powder -coating equipment to ensure a consistent, high quality finish to all of its products.
Product specifications displayed in this handbook are accurate at time of printing.
Improvements and additions are continually being made to the product range.
Check with your nearest Leda Sales office that the designs and specifications displayed are still current.
Comprehensive brochures and technical literature on the complete range of Ledas architectural and security products are available on request or visit the website:
www.ledasecurity.com.au
Leda Security Products Pty Ltd 2014.
All rights reserved. No part of this work may be produced or utilised in any form or by any means, electronic or mechanical, including photocopying, recording or in any information storage or retrieval
system, without the prior written permission of Leda Security ProductsPty Ltd.
1www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Tab
le o
f Co
nte
nts
]Table of Contents
LeAderS in doorS And doCkS . . . . . . . . . . . . . . . 3
engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SpeCiFiCATion To CoMMiSSioning . . . . . . . . . . . . 5
HydroSWing doorS . . . . . . . . . . . . . . . . . . . . . . 7
Hydroswing Aviation Doors . . . . . . . . . . . . . . . . . 8
Hydroswing Agricultural . . . . . . . . . . . . . . . . . . . . 9
Hydroswing Mining and Industry Doors . . . . . . . . .10
Hydroswing Architectural Doors . . . . . . . . . . . . . .11
Hydroswing Door Anatomy . . . . . . . . . . . . . . . . . .12
Hydroswing Door Wind Ratings . . . . . . . . . . . . . .13
FAbriC doorS . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
QUAd or bi-FoLding . . . . . . . . . . . . . . . . . . . . . . 19
Tri or bi-SLiding . . . . . . . . . . . . . . . . . . . . . . . . . 20
pAneL LiFT doorS . . . . . . . . . . . . . . . . . . . . . . . . 21
Leda Overhead Doors . . . . . . . . . . . . . . . . . . . . . 21
Glazed Panel Lift Doors . . . . . . . . . . . . . . . . . . . . 22
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
LPDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Leda Industrial Sectional Doors . . . . . . . . . . . . . . 26
Leda LS Manual version . . . . . . . . . . . . . . . . . . . 27
Leda LSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Leda LSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Lifting Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
NL Normal Lifting . . . . . . . . . . . . . . . . . . . . . . . 32
HL High Lifting . . . . . . . . . . . . . . . . . . . . . . . . . 34
VL Vertical Lifting . . . . . . . . . . . . . . . . . . . . . . 36
RLO / RLB Reduced Lifting . . . . . . . . . . . . . . . . 38
IL Inclined Lifting . . . . . . . . . . . . . . . . . . . . . . . 40
HLIL High Inclined Lifting . . . . . . . . . . . . . . . . . 42
gLAzed doorS . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
LEDA Glazed Panel Doors . . . . . . . . . . . . . . . . . . 48
Panel Details . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
LEDA Panel Doors Portals . . . . . . . . . . . . . . . . . . .51
LEDA Panel Door Motors . . . . . . . . . . . . . . . . . . . 54
LEDA Panel Door Maintenance . . . . . . . . . . . . . . . 60
Accessories for Panel Lift Doors . . . . . . . . . . . . . 61
HigH Speed doorS . . . . . . . . . . . . . . . . . . . . . . . . 67
Sector Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Smart Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Sector Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Smart Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Flash CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Wash Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Traffic C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Traffic CM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
FLexibLe FLAp door . . . . . . . . . . . . . . . . . . . . . . 86
FLexibLe STrip door . . . . . . . . . . . . . . . . . . . . . . 88
doCkbrAin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
doCkbrAin eyeS . . . . . . . . . . . . . . . . . . . . . . . . . 95
2 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Ta
ble
of
Co
nte
nts
]Table of Contents
doCk inTrodUCTion . . . . . . . . . . . . . . . . . . . . . . 97
Dock Leveller Installation Methods . . . . . . . . . . . .100
Construction System . . . . . . . . . . . . . . . . . . . . . .101
Standard Embedded Pit type . . . . . . . . . . . . . . . .101
Hanging Pit type . . . . . . . . . . . . . . . . . . . . . . . . .101
Box Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Lip TypeS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
1 . Swing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
2 . Telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . .103
FiniSH opTionS . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Painted (Standard) . . . . . . . . . . . . . . . . . . . . . . .104
Hot dip galvanizing . . . . . . . . . . . . . . . . . . . . . . .104
Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . .104
doCk LeveLLerS . . . . . . . . . . . . . . . . . . . . . . . . 105
LDL14 Embedded . . . . . . . . . . . . . . . . . . . . . . . .105
LDL1 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
LDL11 Embedded . . . . . . . . . . . . . . . . . . . . . . . .109
LDL12 Hanging . . . . . . . . . . . . . . . . . . . . . . . . . . 110
LDL13 Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
All in One LDLX6 Series . . . . . . . . . . . . . . . . . . . 112
TeLeSCopiC Lip doCk LeveLLerS . . . . . . . . . . . .113
LDL2 and LDL3 Series . . . . . . . . . . . . . . . . . . . . 113
LDL21 and LDL31 Embedded . . . . . . . . . . . . . . . 115
LDL22 and LDL32 Hanging . . . . . . . . . . . . . . . . . 116
LDL23 and LDL33 Box . . . . . . . . . . . . . . . . . . . . 118
All in One LDLX6 Series . . . . . . . . . . . . . . . . . . . 119
doCk STrUCTUreS . . . . . . . . . . . . . . . . . . . . . . . 120
doCk SHeLTerS . . . . . . . . . . . . . . . . . . . . . . . . . 121
ACCeSSorieS . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Options & Accessories for Docks . . . . . . . . . . . . . 124
MAnUAL doCk LeveLLer . . . . . . . . . . . . . . . . . . 126
Cast In Frame . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Minidock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
STeeL SLiding doCk drAWbridge . . . . . . . . . . 129
LDDB1 and LDDB2 Series . . . . . . . . . . . . . . . . . .130
LDDBS Steel Loading Bridge . . . . . . . . . . . . . . . .131
LoAding bridgeS . . . . . . . . . . . . . . . . . . . . . . . 132
LDDB51 Series Aluminium Loading Bridge . . . . . .132
LDDB51 Aluminium Loading Bridges . . . . . . . . . .133
LDDB52 Aluminium Loading Bridge . . . . . . . . . . .134
LDDB53 Portable Aluminium Loading Bridge . . . .136
LDDB53 Aluminium Loading Bridges . . . . . . . . . .137
LDDB54 Aluminium Loading Bridge . . . . . . . . . . .138
LDDB54 Aluminium Loading Bridges . . . . . . . . . .139
Drawbridge Frame . . . . . . . . . . . . . . . . . . . . . . .140
Cast in Angle . . . . . . . . . . . . . . . . . . . . . . . . . . .140
doCk SeALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
LDFS Foam Seal . . . . . . . . . . . . . . . . . . . . . . . . . 141
LDSR Mechanical Seal . . . . . . . . . . . . . . . . . . . .142
LDLF13 and LDLRE Mechanical Seal . . . . . . . . . .143
Inflatable Seal . . . . . . . . . . . . . . . . . . . . . . . . . . .144
doCk bArrierS . . . . . . . . . . . . . . . . . . . . . . . . . 146
Loading Dock Gates . . . . . . . . . . . . . . . . . . . . . .147
Roll Over Gate . . . . . . . . . . . . . . . . . . . . . . . . . . .147
doCk rAMp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
CUSToM doCkS . . . . . . . . . . . . . . . . . . . . . . . . . 149
SCiSSor LiFTS . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Shallow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Car hoists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
3www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Le
ad
ers
in D
oo
rs a
nd
Do
cks
]intro > Leaders in doors and docks
As Australias leading specialist in loading docks and doors, Leda can offer a complete range of integrated dock solutions comprising industrial and high speed doors, dock levellers, seals, igloo's.
For the complete range of Securapost bollards refer to Ledas Architectural & Security Bollards Handbook.
Leda offers:
Holistic solutions
Standard product range
Standards compliance
Quick turnaround
Local production and parts support
Minimal downtime
Designing material handling solutions requires an holistic approach. This is the fundamental undertaking by Leda Security in recommendations to clients, consulting organisations and business partners.
Leaders in Doors and Docks
4 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
One of Ledas strengths is its vast engineering experience in designing site-specific solutions, making it the go to manufacturer for complex or difficult projects.
From the initial site survey and audit, Leda will provide the necessary technical information and options to allow clients to make an informed decision.
DesignIf required, Leda can provide detailed renderings to show how the installation will look upon completion a useful service, and one to take advantage of when a committee or management board need to make the decision.
ProductionPrior to manufacture, a full set of working drawings will be submitted for approval eliminating any misunderstanding of the projects extent of work.
InstallationA Leda project manager will be appointed in advance of the installation to plan and supervise stages of production and ensure a smooth, professional install and commissioning of the equipment.
Service and maintenanceLeda technicians will make recommendations on the required service and maintenance program required for your equipment based on expected usage. An agreed Preventative Maintenance Contract (PMC) will then be implemented to ensure the equipment provides a maximum service life.
WarrantyA comprehensive 12 months warranty (parts and equipment) commences from date of supply (or commis si-oning if Leda installs). This will be extended to 24 months provided Ledas recommended PMC is entered into within 6 months of the equipment being installed.
Engineering
[ E
ng
ine
eri
ng
]intro > engineering
5www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Sp
ec
ifica
tion
to C
om
mis
sion
ing
]intro > Specification to Commissioning
In selecting Leda, you are selecting an Australian owned company that manufactures its products in Australia under strict OH&S and quality controlled programs. Ledas strengths lie in its ability to offer comprehensive solutions through an extensive support structure comprising local sales teams and experienced engineering and design staff backed by modern manufacturing facilities and unparalleled installation and maintenance support.
You will be provided with:
A check list to assure you select the appropriate accessories and consider the operational performance you will require ofyour dock or door.
Comprehensive working drawings allowing your staff to sign-off on before commencement ofproduction.
Structurally designed footing details.
An operations manual including specifications, drawings, spare parts list and recommended servicing information.
Double your warranty periodAfter successful commissioning ofyour equipment, and normally within a month, youll receive an after-sales service letter containing information on suggested servicing ofyour equipment and details of various Preventative Maintenance Programs available. If you elect to adopt one ofthese Programs Leda will double your warranty period from 12months to 24 months.
Specification to Commissioning
SpecificationAt the early stages of any project, Leda can provide advice and engineering documentation, including written specifications for product, and CAD drawings for site plans.
ServiceService is a critical component to the long-term operation of all Leda equipment. Preventative maintenance programs are available to ensure all products continue to perform reliably and efficiently and it is highly recommended that a service and maintenance agreement be taken out for all automated or mechanically moving products.
InstallationThe construction industry is learning the benefit of suppliers able to project manage as it is more critical than price. Incompetent sub contractors will end up requiring more management which wipes out any perceived price advantage. Having Leda install ensures that there are noexcuses for poor commissioning.
6 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
intro > Specification to Commissioning
DesignOngoing research and development provides the products and technical advice needed for logistics solutions. Products are 3D modelled, and drawn for installation when required. Shop drawings are submitted for approval prior to manufacturing. Engineering staff includes both mechanical and electrical with close support from civil engineering sub-contractors.
TestingLeda undertakes ongoing testing programs to confirm design and engineering specifications. From the test data, computer-modelling of the expected wind ratings can be carried out for both product and footing designs.
EngineeringLeda not only engineers the doors, but has developed anumber of lifting options that are designed to significantly reduce installation times and costs. This technology has been developed by Ledas engineers and further demonstrates Ledas reputation as the industry leader.
ManufacturingLedas modern 6000m2 manufacturing facility is located at Tuggerah NSW (90km north of Sydney). Ledas internal manufacturing processes use MRP (Manufacturing Resource Planning) which also enables an effective QA system. To gain a deeper understanding of Ledas manufacturing capabilities, prearranged tours of the facility are welcome.
7www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Hyd
rosw
ing
Do
ors
]intro > Hydroswing doors
AviationAgricultureMiningIndustrialArchitectural
Hydroswing doors are simply the latest and greatest in large doors for just about all applications. Some of the reasons you should consider Hydroswing doors include:
1. Existing buildings can be retrofitted easily.
2. Clearance height does not get any better.
3. Widths of over 45m installed.
4. Hydraulic operation means remote sites have easy service options at lower cost. 70% less moving parts means less maintenance.
5. Additional work area with door raised for sun and rain protection. Ideal for agriculture.
6. Safety features such as mechanical locks on thehydraulic arms to prevent accidental lowering.
7. Wind ratings to suit all areas of Australia.
8. Quick and easy to install so less disruption to operations.
9. Manually operable on power failure with UPS.
10. Add insulation, glass, windows or just about anycladding or materials.
11. Add smaller pedestrian or vehicle doors.
12. 100% sealable.
Hydroswing Doors
8 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ H
ydro
swin
g A
via
tio
n D
oo
rs ]
intro > Hydroswing Aviation doors
Hydroswing Aviation Doors
The Hydroswing hangar door is now the benchmark single panel hydraulic door system. Whether you have a home built plane, Global Express, helicopter, glider, Cirrus or aKing Air, weve got a door that will fit your aircraft hangar.
You worry about flying your beloved aircraft, and like several thousand previous Hydroswing customers in theUSA, well custom manufacture hangar doors in any size as large as 12 mtrs high and 45mtrs wide.
Need more headroom on your airplane hangar? Removing bi-fold doors or slider doors? Replacing them with aHydroswing Hangar Door can increase your overall hangar door opening. Hydraulic doors are a perfect alternative to fabric and bifold doors and can be easily installed nationally.
The hangar door systems Hydroswing designs and manufactures have some of the lowest in service life costs and lowest maintenance costs in the large door industry. Over 70% less moving parts and no additional rails to be sunk into the threshold or hung to the header, no wires or chains to snap rust or shear, no exposed drive shafts, gears or extra locking devices to keep the door shut.
Doors are manufactured to ISO 9001 and provide a fully engineered product for T hangars, FBO, executive, Military and more recently aerospace industry (such as Wing andfuselage paint booths). Hydroswing is the original and ever evolving single panel hydraulic door system. Standing out as the world brand leader serving private, corporate, military and general aviation.
9www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Hyd
rosw
ing
Ag
ricu
ltura
l ]intro > Hydroswing Agricultural
Hydroswing Agricultural
The Hydroswing agriculture door has become the icon door for farm machinery sheds big and small. Providing trusted reliability with technology farmers trust and believe in. Theagriculture and farming industry revolves heavily around hydraulics, why shouldnt your door?
Strong and well sealed, the hydraulic door is easy to install on post frame buildings and pre engineered steel buildings. The Hydroswing ag door is a perfect solution for replacing slider doors and roller doors. You can also enlarge your existing opening by replacing an inefficient bi-fold door. TheHydroswing agriculture door has become the first choice for several thousand agricultural users in
the USA and is now available in Australia.
The shop door made by Hydroswing for agriculture has many inclusive features, such as three framed out window openings and a walk through door as standard, easily carries additional insulation weight and can be used for livestock and cattle operations, just as easily as on a post and frame building or steel building.
Agricultural Doors with special applications such as hydraulically operated covers and bin stores are regular uses of the Hydroswing single panel hydraulic door system. Hydraulic overhead doors have very few moving parts which save you time and money.
10 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ H
ydro
swin
g M
inin
g a
nd
In
du
stry
Do
ors
]intro > Hydroswing Mining and industry doors
Hydroswing Mining and Industry Doors
The Hydroswing mining and industrial overhead door has evolved into many special applications. Mines, factories and machine shops have all adopted the strength and reliability the hydraulic door offers. The Hydraulic Overhead Door is not only the standard door for aircraft hangars and agriculture sheds, its becoming the standard alternate solution for many applications that demand security and ease of use. Whether youre doing a brand new building or replacing an outdated bi-fold door or roller door, theHydroswing Single Panel Industrial Door can help increase opening height while reducing building height.
As the need for simplicity and strength for industrial buildings and industrial processes grows, the hydraulic doors from Hydroswing are a natural choice. Ownership costs of the doors over 10-20 years due to the lower maintenance costs mean increasing operational efficiency and reduced downtime. The hydraulic single panel door is simple, viable, strong and durable in the mining, construction, manufacturing and storage environment.
Hydroswing doors are also used as a hydraulic hatch in therecycling and chemical industries. This allows for secure hydraulically operated covers for in ground tanks and allows use of the upper side of the door where space is at a premium.
As the need to house industrial equipment and secure bio mass facilities grows, the demand for large openings grows. Securing and sealing these dangerous working environments is taken care of with the solid strength and security provided by the Hydroswing Door.
11www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Hyd
rosw
ing
Arc
hite
ctu
ral D
oo
rs ]
intro > Hydroswing Architectural doors
Hydroswing Architectural Doors
The Hydroswing single panel hydraulic door system has become a blank canvas for creative architects who specialize in challenging high profile homes and public spaces. Hydroswing make walls become doors and merge the outside world with an architectural space.
The Hydroswing overhead door can be custom built for size, environmental seals and multiple leaves. Providing feature focus or simply solving a problem that no other door system can. Never has anyone been able to lift so much glass with the touch of a button. Hotels and stadiums feature walls that simply open to the outside world. Restaurants, bars, lobby areas, garages for car collections and anything else where there is a desire tomove walls, Hydroswing is the brand new workspace for imaginative and leading edge architects.
The simplicity of the hydraulic door removes theneed for cables and counter weights used in so many ambitious architectural projects and curved facades. Thedoor can be easily installed to match building profiles, heavy and ornate finishes are lifted with ease with the power of thehydraulic single panel door system.
Never before have architects and designers had the ability to effortlessly and silently move structure. Use of theHydroswing in architecture is a liberation to the existing limiting factors of Bi fold, sliders and counterbalanced doors.
The architectural door / wall possibilities are endless... asis our ability to now make your ideas into reality.
Flush mounting outside mounting
12 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ H
ydro
swin
g D
oo
r A
na
tom
y ]
intro > Hydroswing Mining and industry doors
Hydroswing Door Anatomy
1 Hy-Power. Enclosed power unit or unenclosed standard unit.
2 Premium Hose Sets. Linking header lines to cylinders and power pack to header lines, completely bound and shrouded for double line in a single hose. C/W connectors pre-fitted.
3 Premium Steel Hydraulic Hardlines. For years of maintenance free and leak free performance.
4 Hard Line Connectors. Pre- assembled for center, end, and in-line connection.
5 Steel Pre-hung Frame. And attachment angle steel.
6 Fully Engineered. Tested upper pinpoint, safety factor greater than a factor of 3. Complete with steel pins and sintered insert bearing for extended life and reduced service requirements.
7 Fixed tube frame and attach angle for inside, outside or flush mount to wood, steel or brick structures and buildings.
8 Fixed Frame. Base plate and floor attachments should this be a requirement.
9 Inside Skin Prep. For attachment of insulation or inside skin/cladding.
10 Upright Members. Spaced according to your wind loading requirements (145km/h Standard). Up to 320 km/h upon request for category C and D areas.
11 Two Way Hydraulic Cylinder. Bespoke for your door size and loadings, double sealed for reliability and periods closed to avoid dehydration and deterioration.
12 Lower Pinpoint Clevis. Pin and bearing assembly. Industry leading sintered iron insert bearing for extended life beyond 5 years with zero metal to metal contact, no grease required.
13 Easy Connect Splice Plates. Weld free complete with lok-tite bolts for a lifetime of secure connection.
14 Hydroswing Patented Truss System. Industry leading for strength with sizes up to 150 wide possible in single panel.
15 Cross Members. For unlimited finish attachment, door and window openings upon request provided.
16 Carbon Guard Primer. Paint system, light gray as standard applied to ISO 9001 standards with inspection certificate.
1
23
4
5
6
7
8
910
11
12
13
14
15
16
Flush or outside mountingThere are two methods of installation being flush or outside mounting. Flush means the door is essentially installed inside the building. If mounted outside then the mouting frame and door are literally outside on the side of the building. Both pictures illustrate the Franna crane method of manouevering the door into position.
13www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Hyd
rosw
ing
Do
or W
ind
Ra
ting
s ]
intro > Hydroswing door Wind ratings
Hydroswing Door Wind Ratings
Standard DoorsHydroswing doors are designed to meet relevant wind standards in the closed position Within Australia and NZ the relevant standard is AS/NZS 1170.2:2011. There are areas from A to D with D being the highest due to cyclonic conditions in Australias North. Most of Australias population lives in wind region A.
In the closed position the door will withstand the relevant mean wind speed levels as defined by the standard. In the open position the performance of the door is dependent upon several factors including but not limited to the size and the overall weight of the door. In normal circumstances the wind speed required to damage the door is significantly above operating conditions we would expect the door to be opened in.
Average wind loading for standard doors in the open position is 56km/h or 35 knots.
Special wind rated doorsThose locations within wind regions B through D are not forgotten. It is important you let Leda know the doors intended location from the outset so our engineers can consider the wind rating in both budget estimates and design of Hydroswing doors.
Using our structural modeling techniques each element of the door can be adjusted to meet very high performance requirements.
Wind Case StudyHurricane Charley hit Florida USA Punta Gorda airport in 2004 and the results as you can see in the pictures above were devastating to many of the aircraft hangars on the airport. Hangars were demolished by winds in the storm of 217 km/h. One of the differences determining those hangars that were demolished or ok was the door type. Hangars with Hydroswing doors experienced little if any damage
Bifold doors were also common on the airport and these doors were quickly blown in which left the aircraft open to flying debris and high winds. The one piece hydraulic doors, however stood strong. Owners of these hangars suffered little if any damage to their hangars and aircraft.
Why did the Hydroswing doors remain intact? In this case the strength of hydraulics kept the doors from budging. Hydroswing doors have superior strength due to their hydraulic technology. As an additional strengthening feature, Hydroswing doors can use bolts or sliding pins at the base of the door. This is the only part of the door not directly secured to the building structure. Additionally, Leda can now automate the drop bolts into the building or ground for additional strength without the need toremember to install the bolts prior to a cyclone.
HydroSwing Brand X
14 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ F
ab
ric
Do
ors
]product range > DOORS > Fabric Doors
Leda industrial doors are designed & manufactured to suit a variety of applications & weather conditions for any large building opening.
Our doors are specifically designed by our skilled & experienced engineers which allows Leda to tailor solutions for any requirement. Utilising either steel or aluminium frames for various working conditions & extra wind loading requirements, we can design a solution to fit the most demanding locations.
Max . Width . . . . . . . . . . . . . . . 60m
Max . Height . . . . . . . . . . . . . . 40m
opening Speed . . . 140-160mm/sec
Closing Speed . . . . 140-160mm/sec
duty Cycle (per day) . . . . . . . . . 50
operating Temp . . . . . -10 to 70 C
power . . . . . . . . . . . . . . . . 3 phase
Materials . . . . . . . . . . . . PVC fabric
Your Logo Here
(For larger span doors, movable mullions are installed)
Mining
From medium to extreme sizes we can design & manufacture doors up to 60m wide & heights up to 40m.
All gearbox & motor systems are designed for maximum efficiency.
EngagementOur recommended staged approach to large door projects is:
1 . Client to provide specifications & wind loading for the area to which the doors will be installed. Make sure you differentiate wind loadings when the doors are closed or in motion.
2 . Leda will provide basic door information such as how the doors are typically mounted or similar drawings. They are not site specific at this early stage.
3 . Leda will provide a door quote including engineering costs. We trust that around this point a preferred supplier can be identified as all costs are now known. Once Leda has the wind loadings, location & door sizes we typically quote in 5-7 days.
4 . If your due diligence in relation to Leda & the door are satisfied, Leda should be engaged to assist with final door designs to meet site specific building requirements including structural certificate agreement of the door which is crucial to do before the project starts. The structural engineering is billable work but no commitment beyond engineering costs is required.
5 . Final door & installation costs submitted if any changes.
6 . Awarding of contract.
Shipping Aviation
Fabric Doors
15www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Fa
bric
Do
ors
]product range > DOORS > Fabric Doors
Lead Times GuideWhile Leda will provide a complete project timeline with our quote, some timing guidelines are below:
1 . Quotation 5-7 days
2 . Engineering can be from 5 days to 5 weeks & a hard task to pin down as lots of changes, people & sign offs required.
3 . From drawing sign off to goods ready for shipment (overseas) is approx. 6-10 weeks, again dependant on size & quanitity.
4 . Shipment time we allow 6 weeks & add 2 more weeks for customs & road shipment to site.
5 . Installation for small doors is typically 2 5 days & large doors up to 7 14 days each. Doors under 12m can be shipped largely assmebled so faster to install.
Side Rail & Top SectionsThe side guide rails & bottom sections are manufactured using reinforced steel. The rail system is made from aluminium or steel depending on individual site requirements. Each section is a maximum of 2m to enable rapid & easy repair or replacement in the event of impact damage.
Cable breakage systems are installed at each end of the bottom section to prevent the door closing in the event ofcable failure. The steel lifting wires are also connected to cable breakage system.
FabricThe door is made of two layers of heavy duty special 900gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections.
Vision panels can be built into the doors to allow light penetration when the doors are closed.
SealsSide rail rubber seals & our custom designed rubber bottom seal provide a weather & vermin resistant seal when the door is closed.
Side view
Front view
note: Height requirements of approx. 1500mm above clear
opening height.
16 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ F
ab
ric
Do
ors
]product range > DOORS > Fabric Doors
InstallationWhile all doors must go through an individual design review, these renders show typical detail of how the door attaches tothe building.
Doors are typically attached to existing building columns via PFC brackets.
These are normally welded & bolted between existing columns & door channel.
Front view
Attachment detail
1
22
1 . door (shown in Yellow)
2 . building Frame (shown as Galvanised)
17www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Fa
bric
Do
ors
]product range > DOORS > Fabric Doors
Wind RatingsSee AS/NZS 1170.2:2011 for wind information for your intended site location. Fabric doors can be designed for cyclone areas which are referred to as Wind Region D in thestandard. Most major cities are inAregions.
As part of the structural engineering review, other variables in addition to region to be considered inclulde:
Wind direction
Surrounding Terrain
Shape of building
positive & negative pressure
Structural Height
Wind borne debris
That is why the structural engineering review is conducted at the start of the process so structural engineering certification is provided.
Consideration should also be given for wind loadings when the door is closed, in motion, or open.
How it worksThe doors consist of either two sheets of PVC coated polyester fabric with intermediate, horizontal steel or aluminium sections, fitted between the fabrics. These intermediate sections transfer the wind load to vertical guide rails which also supply extra wind resistance. Thedoor leaf is opened by the bottom section being lifted by steel wires which are wound up on drums, driven
by theautomated drive system. The sections above are stacked on top of one another & the fabric folds into pleats on the sides.
ConstructionThe door leaf is made of two layers of heavy duty special 900 gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections.
The intermediate top section is bolted to the header box with steel wire.
The fabric is attached to both sides of the intermediate sections for added strength.
Operation SystemThe system can be controlled by a completely automated system or a simple pushbutton. The control box has an up & down button & an emergency stop button.The door automation can be integrated with remote controls, radar, induction loops, sirens or traffic lights
MaintenanceThe Leda Fabric Doors are low maintenance requiring a recommended annual inspection process to check the steel cable & running rails for any signs of wear & tear.
18 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ F
ab
ric
Do
ors
]product range > DOORS > Fabric Doors
Standard Colour Swatch
pvC Technical dataType of Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PVCFinish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Both sides lacquered, high glossFlame retardancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIN 75200, ISO 3795 6Crack resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . no cracks
19www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ La
rge
Ste
el D
oo
r ]product range > DOORS > Large Steel door
Largespandoorsfor:Aviation,Shipping,Defence
Quad or Bi-FoldingProduct Code: LVBF
SizingDoors 20 x 20 metres have been installed & larger sizes can be considered.
door MountingThe nature of Quad or Bi-Folding doors is that thecounterweight system means it is not top heavy; making it a very stable door.
Doors can be designed with a self supporting frame or as part of a new building.
Wind LoadingsCan be cyclone rated
A critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification to AS1170.2 (2011)
existing column in blue (example)
door upright profile in green
(bolted to building column)
Standard Colour Swatch
Typical side detail
Townsville QLd
Typical plan detail of side support post
20 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ L
arg
e S
tee
l D
oo
r ]
product range > DOORS > Large Steel door
Tri or Bi-Sliding
Product Code: LVBFCan be cyclone rated
door MountingThe advantage of Tri or Bi-Slilding doors is that the weight of the door is transfered directly to ground.
This removes the need for heavy structures to suspend thedoors.
Doors can be designed completely independant of building or integrated inside the stucture.
Wind LoadingsA critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification.
AutomationLeda are able to automate large doors also and have retrofitted automation to older doors on occasion.
21www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
Leda automatic overhead doors the ideal solution for all industrial needsLeda overhead doors offer a range of real and amazing advantages.
Their compact size leaves more available space both inside and outside the premises Leda sectional overhead door side runners move vertically along the wall and parallely to the ceiling, ensuring optimal use of the available internal space. Furthermore, their installation above the opening fully exploits the transit opening.
easy and practical to open and operate Their compact size ensures more available space both inside and outside the premises. They are also practical and easy to use.
More environmental control Their heat insulation and soundproofing, ensured by insulated panels, improves internal living conditions and energy consumption.
Leda Overhead DoorsBestuseoftransitopeningsWeatherresistantMaximumsafety
Wide range of colours and finishes offered (Standard streaked grooved)
White similar to RAL 9010W
Silver similar to RAL 9006W
green similar to RAL 6005W
dark brown similar to RAL 8014W
inside similar to RAL 9010E
Light and aesthetically pleasing environments The panels can also be manufactured with the addition of practical portholes or full aluminium sections featuring polycarbonate or unbreakable glass panels, wire meshing or air grilles.
They add value to the premises and meet all requirements The design and different solutions offered ensure the door to be aesthetically pleasing and perfectly suited in any architectural environment from modern and traditional industrial buildings to fine commercial buildings. The doors can meet any industrial and commercial requirement and add value to the building they are installed on. Leda doors are built to ensure the highest ease and flexibility of use which, in turn, ensures a quick, hassle free and accurate replacement of old doors.
Technical features of the product range .For transit openings up to 8 m wide . Minimum space required on the lintel 200 mm . distinctive features of models offered .
Leda overhead door panels are sturdy and ensure a high heat insulation and soundproofing. The galvanised material used and the sandwich-type frame effectively protect itfrom the elements. The core insulated with high-density (48 kg/m3), CFC-free polyurethane foam offers high protection from outside temperatures. Leda overhead door panels are 40 mm thick and are available in two heights 500 mm and 610 mm.
great heat insulation coefficient! Thermal transmittance according to standards UNI EN
13241 appendix B, UNI EN 12428, UNI EN ISO 10077-2, UNI EN ISO 10211-2. Value refers to approximately 25m2
entrance door without window sections and without pedestrian doors. Uw = 1.18 W/m2K
22 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Glazed Panel Lift Doors
Acrylic panel with 3+9+3 mm chamber
See-through acrylic or satin-finish 3 mm panel See-through or satin-finish 3+3 mm unbreakable glass
Aluminium air grill Painted drawn wire meshing
glazed panel Lift doors is a sectional overhead door designed to be combined with thermally insulated panels and extruded aluminium panels, shaped for inserting methacrylate (acrylic), glass, grilled or meshed windows.
This combination gives the door a very distinctive look, which enhances the face of both commercial and industrial buildings, where glazed panel Lift doors blends in
extruded aluminium section with acrylic, glass, mesh, grill panels
perfectly as a practical and decorative feature.
glazed panel Lift doors makes the environment light and pleasant to work in as it allows natural light to go through the large clear area.
The aluminium profiles are highly resistant to the elements and ensure a longer life of the door.
23www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
Safetydevicesgivepeaceofmindduringoperation
All Leda doors are fitted with standard or optional safety devices
Accessories meet all business requirements
Torsion springsThe steel torsion springs (manufactured to DIN 17223 standards) have been designed to ensure a standard life from 10,000 to 100,000 operation cycles. With standard compliant spring safety.
Safety device against spring breakageThis special device immediately stops the door panel from closing in the event of balancing spring breakage.
Anti-pinching guardAvoids the risk of fingers from being pinched if a hand if rested on the door moving panel.
Safety device against cable breakageThis special device immediately stops the door panel from moving in case ofbreakage of the return cables.
infra-red photocellsThe panel down movement is automatically stopped or reversed if the infrared beam is broken.
Moving photocellsElectronic DSS safety device complete with moving photocells, without contact on obstacle (as standard for automatic version).
HandlesSturdy and ergonomic, they have been designed to ensure ease of
manual door operation.
Window sectionsNatural or lacquered aluminium window, with single or double
methacrylate panels and glazing bars.
pvC air grillesThese avoid condensation and vent any fumes to the outside
perimeter SealsThe seals are made of special
anti-ageing rubber and are located on the ends of the doors and on
theside of the transit opening. They ensure total insulation thus avoiding the ingress of air, dust and water.
portholesOval or rectangular in acrylic material, with polycarbonate panels with chamber, glazing bars and stretched ventilation net.
External
Internal
goL 4 transmittersFixed code four channels,
with cloning option, or with rolling code system.
Certified and directive compliant.
goL 4W transmittersFour-channel in metal
containers for easy use even when wearing
gloves.
xel 2 infrared beam photocell
Allows the automation to operate at the highest
safety levels. Can be wall or column mounted. Modulated infrared beam.
deb 08 key-operated handle
Key-operated handle with 8m long cord for remote-operated release system.
Lamp230 V and 24 V flashing
light with flashing operation controlled from
the control panel.
24 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
All accessories have been designed to add value to the door, to ensure long and reliable operation and peace of mind.
LpdM accessories
H LpdM
Chain extension LpdM LCg
Compatible with LPDM14 and LPDM 15 (also suitable for already existing automations as long as they are correctly configured version 1.0)
The full system includes the motor plus the LPDM SBC chain-operated release with standard chain plus a 3800 mm long extension if required
Accessories
H LPDM LPDM LCG
25www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
dimensions Motor configurations
LPDMdriveunitreliablyautomatesalltypesofsectionaloverheaddoors.
LPDM
Heavy-duty motor, for total reliabilityReduced and compact sizes; can be easily installed when space is at a premium. Modern and smart design. Can be used on different applications on sectional overhead doors:
In line installation
Pinion and chain installation.
Easy to install; keyed on the drive shaft or indirectly driven by pinion and chain, does not require other moving parts. Adjustable rotary limit switch unit.
Two manual release systems: 1 . With cable: fast release system.
2 . With drive rod or chain.
After releasing the automation, the door can be manually operated. Their indirect drive installation allows operating speed to be adjusted according to requirements or tackles applications when side space is not available.
External and vertically mounted
(standard)
External and horizontally
mounted
Internal and vertically mounted
only VL sliding system
Pinion and chain driven
26 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
BestuseoftransitopeningsWeatherresistantMaximumsafetyLargeopeningsOptimisesgoodstransit
Leda Industrial Sectional Doors
Main FeaturesVertically operated industrial door consisting of thermally insulated horizontal panels sliding on wheels within side runners. The door is tted with ball joints between the panels, it bends near the ceiling and then stops parallel to it (NL- HL- RLO/RLB IL- HLIL versions) or continues further up along the opening (VL version), thus leaving theentire access opening free.
panelThe panel is 40 mm thick and is supplied in two different heights: 500 and 610 mm. The panel is made of a galvanised steel double wall manufactured with the Sendzimir procedure, then treated with primer and polyester resin paint and subject to a further treatment which ensures a high surface strength. The nish on theoutside of the sheet metal has a STREAKED EFFECT whilst the nish on the inside of the sheet metal has an embossed orange peel effect; the external side of thepanel is made of horizontal groove panels. Anti-pinching and anti-crushing nger-saving device.
insulationThe insulation tted to the panels is made of 48 kg/m3 density, self extinguishing Class B2, CFCs-free (chlorofluo-rocarbons) polyurethane foam. The average thermal transmittance value for the whole door installed is highly impressive: U = 1.51 W/m2k.
SealsThe seals supplied as standard are anti-ageing EPDM seals and are located in the following hinged points:
a) intermediate seals between consecutive panels;
b) lower doorstop lip seal;
c) upper doorstop nned seal tted to seal the door near the lintel;
d) vertical seals, tted to the side uprights.
Surround profilesThe sides of the door panels are tted with galvanised, white powder coated steel proles which serve the purpose of keeping the consecutive panels that make up the sectional overhead door aligned, as well as holding against the insulated panel the support side hinge for the sliding rollers. In the bottom section of the rst panel a hideaway seal-holder aluminium prole is tted, whilst the upper section of the last panel is enclosed in a black painted aluminium prole which acts as holder for the closure lip seal.
runners and sliding systemsThe runners are made of galvanised cold proled sheet metal suitably shaped to hold the side rollers. The joint between the runners that make up the door is spot welded and its size is calculated according to the door dimensions and sliding unit type. The sliding operation of the panels inside the runners is ensured by silent operation rollers tted with very strong plastic wheels with radial ball bearings.
Springs and lifting cablesThe suitably loaded torsion springs are made of a steel cable: they are located inside the upper guide section, on a horizontalshaft directly connected with the cable winder pulleys made of die-cast aluminium and tted withhelicoidal slots which hold themultiwire steel cables used to lift the door.
Safety devicesThe fully certied safety devices are tted as standard on all doors and will operate in the following cases, in order toavoid the facing from accidentally falling:
a) in case of traction cable breakage;
b) in case of torsion spring breakage.
WarningOnly for doors with PL > around 4000 mm, in HL and VL elevations, all panel dark colours, including those available in the standard range such as colours RAL 8014, RAL6005 and also all non standard dark colours, may cause panel warping due to sunlight, for which we cannot be held responsible: please see the technical manual to find possible solutions to reduce the problem.
27www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
Leda LS Manual version
Sandwich panels proled with double hot-galvanised steel sheet metal, thermally insulated with CFCs-free polyurethane foam.
Base model with horizontal panels; RAL 9010E white embossed, orange peel internal side. Standard external colours: White RAL 9010W, Dark brown RAL 8014W, Green RAL 6005W, Silver RAL 9006W
Sliding rails made of galvanised sheet metal suitably shaped to hold different types of sliding units.
Standard safety devices against torsion spring breakage and traction cable breakage.
Spacer back template.
Balancing system made with suitable torsion springs tested for at least 20,000 cycles (with the sole exception of those shown in grey = 10,000 cycles).
Side hinges, and rollers constructed of electrically-galvanised steel.
Galvanised steel internal lock bolt (not supplied with themotorised or automatic version).
Lower doorstop lip seal.
Internal and external lifting handle.
28 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Leda LSD
Leda door manufactured in compliance with the general technical features previously described in the manual version
LPDM 14 230 V ~ 3A heavy-duty use gear motor.
External plastic casing painted.
Provision for a remote handle-operated release system.
Motor protected by an internal temperature probe.
Built in electrically operated brake and internal rotary limit switch.
The drive shaft is suitable for the following installation types:
LSD
axial mounting
The chain driven version is:
normally optionally
compulsory only for HL2 elevations (for all dimensions: already included in the price) and VL elevation (for PH > 3610 mm: already included in the price)
Open/close selector switches in double insulated enclosure, complete with 10 m cable and EU industrial plug for connection to the gear motor.
Motorisedversionwithpersonpresentcontrol
29www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
BestuseoftransitopeningsWeatherresistantMaximumsafetyLargeopeningsOptimisesgoodstransit
Leda LSA
Automatic version with moving photocells safety system.
Leda door manufactured in compliance with the general technical features previously described in the manual version:
LPDM 14 230 V ~ 3 A heavy-duty use gear motor.
External plastic casing painted.
Provision for any manually operated emergency devices.
Motor protected by an internal temperature probe.
Built in electrically operated brake and internal rotary limit switch.
Release system for maintenance operations.
The drive shaft is suitable for the following installation types:
LSA axial mounting
The chain driven version is:
normally optional compulsory, as well as with overall dimensions PL > 7000 and or PH > 5550 only for HL2 elevations, and VL elevation (for PH > 3610 mm).
E1A electronic control panel (optional PT3 push-button unit).
Bottom edge with doorstop lip seal.
DSS safety device complete with moving photocells, without contact on obstacle.
30 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Lifting Types
LEDA LIFTINGPL PH HA SS(1) SD(1) G Weight in Kg
min . max . min . max . min . max . min . min . min . max .
1800
8000
1780
5570 420
150 150
pH + 1060
500
7000
510 700
960 2860
pH HA + 1100
650
5550
2860 4460 575
pH + 300 600
6500 4500
285
200 200 pH + 1330 290
200
7000
5550 490
150 150
pH + 560
500
>5550 550 700
5550
960 4460 pH HA + 560 575
490
3150
650
550 575
31www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
* The last panel from 610 is cut the order of the panels can be modified when ordering (if there are no accessories with door blade) .
Leda Door blade composition
PH 1 2 3 4 5 6 7 8 9 10 11 12
1780610
500610
1890 6102060
500500
500
5002170
6102280
6102390610
2500 6102560
500500
500
5002670
6102780
6102890
6103000610
31103170 500
500500
500500
610
3280
610
3390
6103500
6103610610
3720 6103780 500
500500
500500
610
3890
610
4000
610
41106104220
6104330 6104390
500500
500500
610
45004610
6104720
6104830610
4940 6105000 500
500500
500500
610
5110
610
5220
6105330
6105440610
5550 6105610 500
500500
500500
610
5720
610
5830
6105940
6106050610
6160 6106220 500
500500
500500
610
6330
610
6440
6106550
6106660610
6770 6106830 500
500500 500 500 6106940
6107000* 610
Panel Position from the Bottom
32 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
NL Normal LiftingNumber of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
LEDA SPRINGS (nL normal Lifting)
PL PH HA SS(1) SD(1) G Weight in Kgmin max min max min min min min max
LS- LSd- LSA- LSdr- LSAr
1800
7000
17805550
420
150 150 pH + 1060
500LSAr + Sp3F 8000
LS- LSd- LSA- LSdr- LSAr 7000510 750
LSAr + Sp3F 8000 7000
HA (mm) A (mm)420 310510 400
33www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
NL NORMAL LIFTING
34 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
HL High LiftingNumber of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
LEDA SPRINGS (nL High Lifting)
PL PH HA SS(1) SD(1) G Weight in Kgmin max min max min min min min max
LS- LSd- LSA- LSdr- LSAr
1800
7000
1780
5550960 2860
150 150
pH pA + 1100650
LSAr + Sp3F 8000 7000 pH pA + 1100
LS- LSd- LSA- LSdr- LSAr 7000 55502860 4460
pH pA + 1100575
LSAr + Sp3F 8000 7000 pH pA
35www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
HL HIGH LIFTING
36 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
VL Vertical Lifting
LEDA SPRINGS (vL vertical Lifting)
PL PH HA SS(1) SD(1) Weight in Kgmin max min max min min min max
LS- LSd- LSA- LSdr- LSAr
1800
7000
1780
3610
pH +330 150 150
600LS- LSdr- LSAr4000
LSAr Sp3F 8000
LS- LSdr- LSAr 70005550 500
LSAr Sp3F 8000
Number of movements for standard version: 20,000. Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
37www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
VL VERTICAL LIFTING
38 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
RLO / RLB Reduced Lifting
PL PH HA SS SD G Weight in Kgmin max min max min min min min max
1800 6500 1800 4500 285 200 200 pH + 1030 290
PL PH HA SS SD G Weight in Kgmin max min max min min min min max
1800 6500 1800 4500 200 200 200 pH + 1330 290
Number of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
RLO
RLB
39www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
RLO / RLB REDUCED LIFTING
40 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
IL Inclined Lifting
PL PH HA SS SD G Weight in Kgmin max min max min min min min max max
1800 7000 1780 5550490
150 150 pH + 560 45500
550 700
Number of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
LEDA IL INCLINED LIFTING
HA
PH
167
A
50
70
2
150
SDPLSSA - A'
A'
B
B'
G
B - B'
150x50x2COMPENSATION COLUMN
CEILING FIXINGBRACKET
OUT FROM DOORWAY INDOOR WAY
ILPH
HA
IL
41www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
IL INCLINED LIFTING
42 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
HLIL High Inclined Lifting
PL PH HA SS SD G Weight in Kgmin max min max min max min min min max max
1800 7000 1800 5550 960 4460 150 150 pH HA + 560 45 650
h (mm) h (mm) h (mm)1 18 16 287 31 600
2 35 17 306 32 625
3 52 18 325 33 650
4 70 19 344 34 675
5 88 20 364 35 700
6 104 21 384 36 726
7 123 22 404 37 754
8 141 23 425 38 780
9 158 24 445 39 810
10 176 25 466 40 840
11 194 26 488 41 868
12 213 27 510 42 900
13 231 28 532 43 932
14 249 29 554 44 965
15 268 30 557 45 1000
Number of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 50,000 100,000, only after technical office check.
LEDA HLIL HIGH INCLINED LIFTING
INCLINED LIFTING
inclination angle () linked to h (measured at 1m from )
43www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
HLIL HIGH INCLINED LIFTING
44 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Fitting with Pipe SpacerSpacing accessories to be used on doors with PL > 4000 and standard colours RAL 8014, RAL 6005 e RAL 5010, and on all dark no-standard colours.
45www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
LEDA Curtain Weights Table (Kg)
PH / PL 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750
1560 46 51 56 61 66 71 75 80 85 90 95 100 105
1670 48 53 58 64 69 74 79 84 89 94 100 105 110
1780 50 56 61 67 72 77 83 88 93 99 104 110 115
1890 52 58 64 69 75 81 86 92 98 103 109 115 120
2060 59 65 72 78 85 91 97 104 110 117 123 130 136
2170 61 68 74 81 88 94 101 108 114 121 127 134 141
2280 63 70 77 84 91 98 104 112 118 125 132 139 146
2390 65 72 79 87 94 101 108 116 123 130 137 144 151
2500 67 75 82 90 97 104 112 119 127 134 141 149 156
2560 72 80 88 96 104 111 119 128 135 143 151 159 167
2670 74 82 90 99 107 115 123 131 139 147 155 164 172
2780 76 84 93 102 110 118 126 135 143 152 160 169 177
2890 78 87 95 104 113 121 130 139 148 156 165 174 182
3000 80 89 98 107 116 125 134 143 152 160 169 179 187
3110 82 91 100 110 119 128 137 147 156 165 174 183 192
3280 89 99 109 119 129 139 148 159 168 178 188 198 208
3390 91 101 111 122 132 142 152 163 173 183 193 203 213
3500 93 103 114 125 135 145 155 166 177 187 197 208 218
3610 95 106 116 127 138 149 159 170 181 191 202 213 224
3720 97 108 119 130 141 152 163 174 185 196 206 218 229
3890 104 115 127 139 151 162 174 186 198 209 221 233 244
4000 106 118 130 142 154 166 177 190 202 213 225 238 250
4110 108 120 132 145 157 169 181 194 206 218 230 243 255
4220 110 122 135 148 160 172 185 198 210 222 234 247 260
4330 112 125 137 151 163 176 188 201 214 226 239 252 265
4500 119 132 145 160 173 186 199 213 227 240 253 267 281
4610 121 134 148 162 176 189 203 217 231 244 258 272 286
4720 123 137 151 165 179 193 206 221 235 249 262 277 291
4830 125 139 153 168 182 196 210 225 239 253 267 282 296
4940 127 141 156 171 185 199 214 229 243 257 272 287 301
5110 134 149 164 180 195 210 225 241 256 271 286 302 317
5220 136 151 166 183 198 213 228 245 260 275 290 307 322
5330 138 153 169 185 201 216 232 248 264 279 295 311 327
5440 140 156 171 188 204 220 236 252 268 284 300 346 332
5550 142 158 174 191 207 223 239 256 272 288 304 321 337
5720 149 165 182 200 217 234 240 268 285 302 318 336 353
5830 151 168 185 203 220 237 254 272 289 306 323 341 358
5940 153 170 187 206 223 240 257 276 293 310 328 346 363
6050 155 172 190 209 226 244 261 280 297 315 332 351 368
6160 157 175 192 211 229 247 265 284 301 319 337 365 373
6330 164 182 201 220 239 257 276 296 314 332 351 371 389
6440 166 184 203 223 242 261 279 299 318 337 355 376 394
6550 168 187 206 226 245 264 283 303 322 341 360 380 399
6660 170 189 208 229 248 267 286 307 326 345 365 385 404
6770 172 191 211 232 251 271 290 311 330 350 369 390 410
6940 177 197 217 239 259 279 299 321 341 361 382 403 423
7000 178 198 218 240 260 280 300 322 342 362 383 404 424
Only for blind curtains with no portholes or doors
46 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
LEDA Curtain Weights Table (Kg)
PH / PL 5000 5250 5500 5750 6000 6250 6500 6750 7000 7250 7500 7750 8000
1560 110 131 137 149 155 160 166 194 201 206 265 273 281
1670 115 137 143 155 161 167 173 202 208 214 273 281 290
1780 120 143 149 161 167 174 180 209 216 222 281 290 298
1890 126 149 155 168 174 180 187 216 223 230 289 298 307
2060 142 173 181 194 202 209 217 255 263 270 348 359 370
2170 148 179 187 200 208 216 224 262 271 278 356 367 37
2280 153 185 193 207 215 223 231 269 278 286 364 375 387
2390 158 190 199 213 221 229 238 276 286 293 372 384 395
2500 164 196 204 219 228 236 245 283 293 301 380 392 404
2560 175 209 218 240 249 258 268 315 325 334 431 445 459
2670 180 215 224 246 255 265 275 322 333 342 439 453 467
2780 185 220 230 252 262 271 282 329 340 350 447 462 476
2890 191 226 236 258 268 278 289 336 348 358 455 470 484
3000 196 232 242 264 275 285 296 344 355 365 463 478 493
3110 202 238 248 271 281 292 303 351 363 373 471 486 501
3280 218 262 274 297 309 320 333 389 403 414 531 547 564
3390 223 268 280 304 315 327 339 396 410 421 539 556 573
3500 229 273 286 310 322 334 346 404 417 429 547 564 581
3610 234 279 292 316 328 340 353 411 425 437 555 572 590
3720 239 285 297 322 335 347 360 418 432 445 563 580 598
3890 256 304 317 349 362 376 390 456 472 485 622 641 661
4000 261 309 323 355 369 383 397 464 480 493 630 650 670
4110 267 315 329 361 375 389 404 471 487 501 638 658 678
4220 272 321 335 368 382 396 411 478 495 508 646 666 687
4330 277 326 341 374 388 403 418 485 502 516 654 674 695
4500 294 351 367 400 416 432 448 524 542 557 713 736 758
4610 299 357 373 407 422 438 455 531 549 565 721 744 767
4720 305 362 379 413 429 445 462 538 557 573 729 752 775
4830 310 368 384 419 435 452 469 545 564 580 737 761 784
4940 315 374 390 425 442 458 476 553 572 588 745 769 792
5110 332 393 410 452 470 487 506 591 611 629 804 830 855
5220 337 398 416 458 476 494 513 598 619 636 812 838 864
5330 342 404 422 464 482 501 520 606 626 644 820 846 872
5440 348 410 428 471 489 507 527 613 634 652 828 855 881
5550 353 415 434 477 495 514 534 620 641 660 836 863 889
5720 370 440 460 504 523 543 564 658 681 700 896 924 952
5830 375 446 466 510 530 549 571 666 689 708 904 932 961
5940 380 451 472 516 536 556 578 673 696 716 912 941 969
6050 386 457 477 522 543 563 585 680 704 723 920 949 978
6160 391 463 483 528 549 570 592 687 711 731 928 957 986
6330 408 482 503 555 577 598 621 726 751 772 987 1018 1050
6440 413 487 509 561 583 605 628 733 758 780 995 1027 1058
6550 418 493 515 568 590 612 635 740 766 788 1003 1035 1067
6660 424 499 521 574 596 618 642 747 773 795 1011 1043 1075
6770 429 504 527 580 603 625 649 755 781 803 1019 1051 1084
6940 444 525 548 602 626 650 675 789 816 843 1078 1112 1146
7000 445 526 549 603 627 651 676 790 817 844 1079 1113 1147
Only for blind curtains with no portholes or doors
47www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
Glazed Doors
Insulated Section Gold Glazed Doors Section
Internal Side
White embossed similar to rAL 9010e Same as external side
External Side
White Streaked similar to rAL 9010W White Similar to rAL 9010
Silver Streaked similar to rAL 9010W Anodized Aluminium natural colour
Green Streaked similar to rAL 9010W Green Similar to rAL 6005
Dark Brown Streaked similar to rAL 9010W Dark Brown Similar to rAL 8014
Insulated panel matching Glazed Doors panels (rAL matched colours)
Panels
Extruded aluminium section with acrylic, glass, mesh, grille panels
* Rhomboid links, electrically-galvanised steel drawn mesh: with natural colour oxidised Glazed Doors panel, the mesh is painted in the standard RAL 9006 colour whilst, in the case of painted panels, the mesh is painted in the same RAL colour as the Glazed Doors panel.
Main Features Panels with side anodized or painted extruded
aluminium surround profiles, available in different types of material: acrylic, unbreakable glass, wire mesh.
Panels aesthetically / functionally matched.
Lightandpleasantenvironments
Maximuminternal/externalvisibility
MaximumsafetyModernandattractiveframe
Codes are per row or panel PL (mm) < 4000 PL (mm) < 5000 PL (mm) < 6000 PL (mm) < 7000
Clear acrylic single wall panel 3 mm SMxgAM40T SMxgAM50T SMxgAM60T SMxgAM70T
Clear acrylic single wall panel 3 mm SMxgAM40S SMxgAM50S SMxgAM60S SMxgAM70S
Acrylic-double glazing panel 3+9+3 mm SMxgAM40C SMxgAM50C
Clear unbreakable glass 3+3 mm SMxgAv40T SMxgAv50T
Clear unbreakable glass 3+3 mm SMxgAv40S SMxgAv50S
* painted stretched meshing 28x10 sp . 1 .5 mm(Air grille approx. 60% of total area)
SMxgAr40v SMxgAr50v SMxgAr60v SMxgAr70v
48 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Mantle with partial number of sections
Mantle completely in extruded aluminium sections
Panel positions from below
PH 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
1780 610 gA/500 610 gA gA gA
1890 610 gA/610 610 gA gA gA
2060 500 gA/500 gA/500 500 gA gA gA gA
2170 500 gA/500 gA/500 610 gA gA gA gA
2280 610 gA/500 gA/500 610 gA gA gA gA
2390 610 gA/610 gA/500 610 gA gA gA gA
2500 610 gA/610 gA/610 610 gA gA gA gA
2560 500 gA/500 gA/500 gA/500 500 gA gA gA gA gA
2670 500 gA/500 gA/500 gA/500 610 gA gA gA gA gA
2780 610 gA/500 gA/500 gA/500 610 gA gA gA gA gA
2890 610 gA/610 gA/500 gA/500 610 gA gA gA gA gA
3000 610 gA/610 gA/610 gA/500 610 gA gA gA gA gA
3110 610 gA/610 gA/610 gA/610 610 gA gA gA gA gA
3170 500 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA
3280 610 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA
3390 610 gA/610 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA
3500 610 gA/610 gA/610 gA/500 gA/500 610 gA gA gA gA gA gA
3610 610 gA/610 gA/610 gA/610 gA/500 610 gA gA gA gA gA gA
3720 610 gA/610 gA/610 gA/610 gA/610 610 gA gA gA gA gA gA
3780 610 gA/500 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA
3890 610 gA/610 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA
4000 610 gA/610 gA/610 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA
4110 610 gA/610 gA/610 gA/610 gA/500 gA/500 610 gA gA gA gA gA gA gA
4220 610 gA/610 gA/610 gA/610 gA/610 gA/500 610 gA gA gA gA gA gA gA
4330 610 gA/610 gA/610 gA/610 gA/610 gA/610 610 gA gA gA gA gA gA gA
4390 610 gA/500 gA/500 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA
4500 610 gA/610 gA/610 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA
4610 610 gA/610 gA/610 gA/610 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA
4720 610 gA/610 gA/610 gA/610 gA/610 gA/500 gA/500 610 gA gA gA gA gA gA gA gA
4830 610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/500 610 gA gA gA gA gA gA gA gA
4940 610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/610 610 gA gA gA gA gA gA gA gA
5000 610 gA/610 gA/610 gA/500 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA gA
5110 610 gA/610 gA/610 gA/610 gA/500 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA gA
5220 610 gA/610 gA/610 gA/610 gA/610 gA/500 gA/500 gA/500 610 gA gA gA gA gA gA gA gA gA
5330 610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/500 gA/500 610 gA gA gA gA gA gA gA gA gA
5440 610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/500 610 gA gA gA gA gA gA gA gA gA
5550 610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/610 gA/610 610 gA gA gA gA gA gA gA gA gA
Glazed Panel Doors
Legendnote:
The possibility of a partial number alu sections, including either the lower or the upper panel is also
foreseen; inthat case the reference limits are the same of the mantle completely in aluminium (insulated panels
dimension match the standard mantle composition).
gA/500 Alu panel with same H or 500mm insulated
gA/610 Alu panel with same H or 610mm insulated
gA Alu panel with same H
500 500mm insulated panel
600 610mm insulated panel
Reinforcing profile positioning
49www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
Full Panel FlatLEDA Glazed Panel Doors
External sideWhite similar RAL 9010S flat smooth
Internal sideWhite similar RAL 9010E staved embossed
* It saves the possibility to force a number glazing greater than the one optimized with limit L, but for acrilic glazing 4
Mantle with partial number of sections Limit for typology of sections and paneling
Positioning reinforcing profiles
pL n sez
profile type
reinfor-cing type
L*
Acrylic 4mm
Acrylic 3mm/
net
Acrylic double glazing
3+3 glass
50 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Panel Details
51www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
LEDA Panel Doors Portals
Staved Panels
Staved Panels
pL n max
obo1b - Black acrylic porthole
obo1W - White acrylic porthole
1800 2070 2070 2700 2700 3340 3340 3970 3970 4600 4600 5240 5240 8000
2 3 4 5 6 7 8
obo1bS - Black satin finish acrylic porthole
obo1WS - White satin finish acrylic porthole
1800 2070 2070 2700 2700 3340 3340 3970 3970 4600 4600 5240 5240 8000
2 3 4 5 6 7 8
obo1biC - Black acrylic porthole with crossed glazing bars
obo1WiC - White acrylic porthole with crossed glazing bars
1800 2070 2070 2700 2700 3340 3340 3970 3970 4600 4600 5240 5240 8000
2 3 4 5 6 7 8
obo1br - Black porthole with black stretched rhomboidal mesh
obo1Wr - White porthole with black stretched rhomboidal mesh
1800 2070 2070 2700 2700 3340 3340 3970 3970 4600 4600 5240 5240 8000
2 3 4 5 6 7 8
52 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
Staved Panels
pL n max
obo2b - Black rectangular window in acrylic double glazing
1800 2640 2640 3460 3460 4290 4290 5000 5000 5500 5500 8000
2 3 4 5 5 5
obo3b - Black oval porthole in acrylic double glazing
1800 2590 2590 3400 3400 4200 4200 5000 5000 5500 5500 8000
2 3 4 5 5 5
obo4b - Black rectangular window in acrylic double glazing
1800 2430 2430 3180 3180 3940 3940 8000
2 3 4 5
Wib1 - Aluminum black lacquered window with acrylic double glazing
WiW1 - Aluminum white lacquered window with acrylic double glazing
1800 2180 2180 2840 2840 3510 3510 4180 4180 5000 5000 5550 5550 8000
2 3 4 5 6 6 6
gri1b - Ventilation grid en black PVC
gri1W - Ventilation grid en white PVC
1800 1980 1980 2580 2580 3190 3190 3790 3790 8000
2 3 4 5 6
note:
On the last panel portholes are applicable in base on the eventual panels height cutting
Over PL5500 portholes are applicable only on panel 610 mm tall
In case of grille on 1st panel, holes for fixing release handle are not drilled
53www.ledasecurity.com.auLeda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ Pa
ne
l Lift D
oo
r ]product range > DOORS > panel Lift door
LEDA Glazed Panel Portals Supplemental
Model Fill-in illuminating surfaces
Fastening Frame colour Frame material
Trip Screw White black plastic Aluminium
obo1b
Acrylic plate with double glazing 1100 cm2
obo1W
obo1bS
Satin finish double acrylic sheet 550 cm2
obo1WS
obo1biC
Double acrylic sheet with crossed glazing bars 950 cm2
obo1WiC
obo1WrS2
Double acrylic sheet with radial glazing bars 550 cm2
obo1WrS4
obo2b
Acrylic plate with double glazing
1790 cm2
obo3b 1490 cm2
obo4b 450 cm2
WiW1
Acrylic double glazing 1180 cm2
Wib1
Model Fill-in illuminating surfaces
Fastening Frame colour Frame material
Trip Screw White black plastic Aluminium
obo1br
Black stretched rhomboidal mesh 760 cm2
obo1Wr
gri1W
Ventilation grid 250 cm2
gri1b
54 www.ledasecurity.com.au Leda Security Products Pty Ltd | 1300 780 450 | [email protected]
[ P
an
el
Lif
t D
oo
r ]
product range > DOORS > panel Lift door
LEDA Panel Door Motors
description Motorised version* Automatic version Three-phase automatic version
electromechanical actuator LDPM 14 PS LDPM 14 LDPM 15
duty class 4 heavy dutyintermittent operation S2 = 30 min / S3 = 50%
power supply 230 V~ / 50 Hz 400 V~ / 50 Hzinsulation class class 1input 3 A 1,2 ATorque / Thrust 60 Nm 65 Nmdrive shaft rpm 22 RPM 32 RPMrelease for manual opening by cable / handle type
operating temperature -20C / +55C-20C / +55C
(-35C / +55C with NIO enabled)
-20C / +55C
protection rating IP 54product dimensions 135x264x350open-close control pre-wired switchControl panel E1A E1T
description Automatic version Three-phase automatic version
electronic panel E1A E1T
Type of usefor 1 motor 230 V~
built-in radiofor 1 three-phase motor 400 V~
(multifunction)
Mains power supply 230 V~ / 50 Hz 400 V~ / 50 HzMotor power supply 230 V~ / 5 A 400 V~ / 6 A
Accessories power sup