Infotrax Engineering Company Profile

Infotrax Engineering Company Registration No: 723031-W _________________________________________________________________________________________________________________________________________________________________

No. 1-3-3A, Blok 1, City Garden Commercial Centre Taman Mirwana, 68000 Ampang, Selangor Darul Ehsan

Tel: +603 4270 2447 Fax:+603 42702616 Email: [email protected] Website: www.infotraxeng.com

Company Profile

INFOTRAX ENGINEERING SDN BHD

1. Dimensional Control Survey

2. 3-D Laser Scan

3. Engineering Services

4. Vibration Monitoring

5. Process Control & Monitoring System

mailto:[email protected]




Company Background

Info-Trax Sdn Bhd (ITSB) is a licensed company with PETRONAS was incorporated in 1991. ITSB has been awarded an umbrella contract (Master Price and Service Agreement) by PETRONAS Carigali in the area of Laser Scanning and Dimensional Control Survey on 2013. Working closely with its own Associate Company Infotrax Engineering (M) Sdn Bhd who is leader and specialist in Accuracy Control, Electronic Survey and Measurement we believe this revolutionary technique, would be able to help and complement oil & gas producer to tremendously reduce the time and money due to unplanned and unscheduled shutdown. As a company with the focus in the Dimensional Control& Engineering Services, ITSB is desired to render it services to Malaysian Oil & Gas company in the area of Dimensional Control Survey & Engineering Services. The services that we could provide starting from Laser Point & Laser Scan Survey until the production of the fabrication drawing and finally the as built drawing.

The provision of 3D CAD models of millimetric accuracy of existing and replacement equipment, utilizing electronic laser data capture methods became the enabler for innovation and subsequent major cost & program savings on both new build and brown-field modification projects.

With this major step forward in technology, ITSB has established a leading position in Malaysia.

Complete Dimensional Survey Service

ITSB and its partner have more than 100 surveyors who are highly experienced in all aspects of new build projects and modifications to fixed platforms and FPSOs. All the survey personnel are equipped with the latest electronic survey instruments and software enabling them to deliver quality results on every project. They are fully conversant in both 2D and 3D drafting to complement their reports and deliverables. Major operators and engineering and construction companies contract us worldwide on both minor and major projects.





Engineering Services

Our engineering divisions fully complement each other when clients specify a complete engineering package as the final deliverable. Our engineers and designers are experienced in brown-field modification projects and are conversant with most mainstream design software systems. We also provide in-house training such as modeling, spec creation, piping & support design, shop drawing production which utilizing the most recent engineering software used (e.g PDMS, Cyclone, AutoCAD, SP3D) to ensure good quality of our people when we place them in client organization. We provide the support to our staff whenever required in performing the duties at the client site.

In house training Detail Design Work

Engineering Department





Organizational Chart





What is Laser Scanning? Objective: To provide a fast, accurate, cost effective solution to obtaining 3D ‘as-built models of your facilities, in the format of your choice. (AutoCAD, Micro Station, PDS, PDMS)

1. Site visit to capture real data in the onshore or offshore environment. 2. 360 degree scans of 5000 points per second enable extremely rapid data collection.

3. Construction of model elements in 3D

environment. 4. Fully rendered model for design, clash checking, visualization and communication.





Dimensional Control Survey – How does it work? Objective: First Time Fit, Clash Free Installation, Zero On-Site welding.

1. Customer supplied design sketch or similar drawings 2. Site Survey to establish as-built coordinate of tie-ins and proposed routing corridor (Rapid capture of pertinent data to + 1mm) 3. Actual as-built surveyed data automatically imported into CAD model space. 4. Actual Tie-in point positions and deviations Computed automatically from Infotrax ScanMaster Software. 5. Details of tie-in-flange deviation geometry are automatically transferred to the fabrication isometric.





6. Customer’s design sketch route centre-line incorporated into 3D model and adjusted to fit between tie-in points. 7. 3D pipe components and equipment items added to the adjusted design centre-line. 9. As-built corridor model exported to visualization and clash detection software 10. Design model of the new pipe-work imported to the as-built corridor model and clash check performed. 11. Clashes detected reported and resolved





12. Construction review to ensure practicality / ease of installing spools and equipment.

13. Semi-automatic Fabrication Isometric Generation. 14. Fabrication conformance verification surveys to international standard tolerances. 15. First Time Fit of New Design. Zero rework. Zero growth. Zero risk.





Examples of Dimensional Control Project

Module support frame installation. As-build of new module support frame overlay with offshore laser and clash report produced.

Piping modifications on fixed platform. All the interconnecting pipework was surveyed and fabricated prior to the installation of the topside modules, these spools were loaded out inside the modules. Once the modules were installed the spools were lifted into position and bolted. Major cost savings for all.

FPSO deck layout model from client 2D design and we survey of existing deck equipment. Inter discipline clash checks done for all existing deck equipment, new piping systems, new pipe rack, new module support frames and modules and new deck equipment. Isometrics produced for all piping systems.





3D As-Built Modeling: Discernable Benefits to End User “The Most Accurate Brownfield Asset Capture”

The deliverable provides 3D modelling services from cloud data to clients who require highly accurate documentation of their facilities. Various types of 3D models are offered to client for the as-built solutions as per below types: 1. Primitive 3D model (Primitive) 2. Semi-Intelligent 3D model (Semi-I) 3. Full-Intelligent 3D model (Fully-I). The translation of the as-built data which captured from the cloud data are translate into millimetre-accurate 3D CAD model using software such as Leica Cyclone, SmartPlant 3D (S3D), PDMS, PDS, AutoCAD, Microstation etc. The cloud data that offered from the laser scanning are compatible for current modelling software that available in the market.

Primitive 3D Model Geometry model only with no attributes or tags attached. Drawings cannot be automatically extracted from 3D model.

Semi-Intelligent 3D Model Primitive model with tag numbers attached in accordance with the P&ID. No attributes are attached and drawings cannot be automatically extracted from the 3D model.

General Work Flow for Point Cloud conversion into various type of 3D model.





P&ID mark-up for Piping & Equipment tagging for Semi-I modeling QAQC

Semi-I model output completed with tagging in dedicated hierarchy for Petronas Project





Sample output of 3D Primitive & Semi-I model in PDMS mode





Full-Intelligent 3D Model

The Intelligent model may be created from the Semi-Intelligent model with all attributes, specs and catalogues dissolved in one active model using intelligent 3D software (e.g PDMS, SP3D, CadWorx etc). In certain cases, the intelligent model also can be created directly from the Point Cloud or Survey raw information as an optional method to suit with. Drawings generally can be extracted automatically from this model. Under normal circumstances, the intelligent model is created in the ‘As-Built’ condition. In the explanation further below describes where the model is required to be manipulated or ‘squared-off’. Where the client has requested that the ‘As-Built’ model is squared off in order to get a presentable ‘As-Built’ engineering drawing output; the manipulation of 3D As-built conditions to square pipework, steelwork, etc need to be carried out in some limitations & guidelines.

Sample output of 3D PDMS fully converted into full intelligent (squared-off mode) with auto drawing extraction from PDMS software

Sample from Petronas Platform





Sample Monochrome Point Cloud output, Fully-I SP3D Model & As-Built Drawing Production of onshore plant in Kerteh, Terengganu for Petronas Project





Sample Colored Point Cloud, SP3D Model, As-Built Isometric production & Colored Truview

c/w Geotag Generation of offshore platform in Sabah for Petronas Project





Lean Engineering: Quick & Safe Turnaround Solution “Single Piece flow, concurrent engineering, co-location” We provide optimal first unit delivered quality engineering, responsiveness to change, waste minimization, safe and just fit-for-purpose in/at the right place, time & quantity Design Engineers must make the right choices, early in the process, to insure client satisfaction and low lifecycle costs. We have a complete set of capable people, processes and tools required to deliver cost effective solutions for the repair order & minor modifications projects as our new bottom up approach especially in topside upstream maintenance area and MOC scope. This allows us to utilize an efficient systems engineering, integrated product teams and recent engineering tools to enable lean engineering processes had a continuous improvement. By using this approach; it was shown that cost and schedule savings are typically significant compared to conventional methods while maintaining safety environment, seamless information flow and quality assurance. Services

2D & 3D Design preparation

Engineering, procurement & fabrication management

Mini work pack (Pre-job & construction)

3D CAD digitizing point cloud (As-Built environment)

Update existing 3d model onto point cloud

2D fabrication detail drawings

Stress Analysis

Benefits

Reduce maintenance spares

Reduce recurring & non-recurring cost against conventional methods

Enables Faster Delivery Times

One stop solution for work packing, engineering, fabrication and construction

Improve cycle time and quality in engineering

Correct first time





Sample from SHELL Miri Project – Repair Order of Closing Spool Replacement





Sample from SHELL Miri Project – Repair Order of Instrument Drain Line Replacement





Sample from VICTORIA PRODUCTION facilities – MOC Scope: Installation of pressurization gas for Coalescer and Produced water collection vessel (3d Design, Clash Checking & Fab Isometric production)





COMPANY EXPERIENCE

MOST RECENT PROJECT

Project Name/ Installation Client Name Scope Start Date &

End Date

MASTER PRICE and

SERVICE AGREEMENT

(MPSA) FOR SKO

Platforms

Completed Platforms to-

date:

PETRONAS

CARIGALI

SDN

BERHAD

Laser scanning and 3D semi-

intelligent modeling (4+1 years

contract)

2014 - Current

1) TBG-A

2) TBG-B

3) E11R-B

4) F9JT-A

5) WLDP-A

6) WLDP-B

7) WLP-A

8) BKP-A

9) BYG-A

10) BYR-A

11) BYP-A

12) BYDP-A

13) MCOT

14) BAP-A

15) BAP-AA

16) BADP-A

17) BAP-B

18) BADP-C

19) BAJT-D

20) BAJT-F

21) BAK-B

22) API-1

23) BNDP-I

24) BNV-A

25) BADP-E

26) BADP-G

27) BAJT-H

28) BA-18

29) TKDP-A

30) TKDP-B

31) TKK-A

32) TKQ-A

33) TKJT-C

34) TKJT-D

35) TKJT-E

36) TKJT-F

37) TKJT-G

38) TKJT-H

39) TK-3

40) BNJT-D

41) BNJT-H

42) WLK-A

43) D35DP-B

44) D35JT-C

45) TEDP-A

46) TEDP-B

47) TEJT-C

LASER SCAN & PDMS

INTELLIGENT FOR SKO

PLATFORM (PHASE 1 –

12 PLATFORMS) PETRONAS/

RANHILL

WORLEY

Laser scanning, 3D full intelligent

modeling, clash checking and re-

engineering drawings

July 2013 – May

2014

1) BODP-A

2) BODP-B

3) BODP-C

4) BOP-A

5) BNP-A

6) BNP-B

7) BN14

8) TKP-A

9) TKP-B

10) WLDP-C

11) TEP-A 12) TEP-B






End Date

MMC-SKO PRICE

AGREEMENT 1) TEP-A & TEP-B

2) CLUSTER 12

(7 PLATFORMS)

3) D18MP-A & BYP-A

MMC

Laser scanning, 3D semi-

intelligent modeling, Clash

checking and re-engineering

drawings. (2+1 years contract)

January – March

2014

PCSB – SKO,SBO,PMO 1) BCOT

2) KUJT-A

3) EWDP-A

4) EWDP-B

5) EWVA-A 6) SMDP-A

7) SMJT-C

INTERGRAPH

– PETRONAS

GTS/

PETRONAS

PMU

Laser scanning, 3D intelligent

modeling, Update P&ID and Data

management.

December 2013 -

Current

FPSO PERISAI KAMELIA EMAS




drawings.

Apr-14

SEPAT FSO & MOPU MMC/PCSB Laser scanning and 3D semi-

intelligent modeling Jun-14

E11RC TECHNIP /

PCSB




drawings.

May - June 2014

BEKOK-C TECHNIP /

PCSB




drawings.

October –

November 2014

JN23 TECHNIP /

SHELL




drawings.

July 2015

Note:

1. We are the current contract holder for Master Price and Service Agreement (4+1

year’s contract) for PETRONAS CARIGALI SDN BHD.





Other Project in Last 5 Years


End Date

RBDP-B VIETNAM TECHNIP /

PCSB

Laser Scanning , Clash Check

PDMS + LMI

Apr-11

BEKOK-C DNV/

TECHNIP

Piping As-built survey & P&IDs

notification

June – September

2011

TKDP-A TECHNIP /

PCSB Laser Scanning & 3D modeling

June – September

2011

GUNTONG A, B & C EMEPMI/

TECHNIP




drawings.

January – May

2013

MDA & MDPP TECHNIP/

HESS

Laser Scanning , EDM survey ,

3D PDMS modeling

March – May

2012

BOP-A / BKP-A OPE /PCSB Clash check Point Cloud VS new

design for modification project

January – March

2011

ERB WEST (EWDP-

A,EWDP-B,EWG-A &

EWP-A)

MMC /PCSB

Clash check Point Cloud VS new

design for modification project –

PDMS + LMI + LFM

January – March

2011

TCOT: PWSU &

REMEDIAL WORKS

KHL /

EMEPMI

Laser Scanning, Clash Check

design against point cloud, re-

issue IFC.

January – March

2011

FPSO

RUBICON,PHILIPINES

RUBICON

OFFSHORE

Laser Scanning & issue point

cloud for Finite Element Analysis.

March – May

2011

SBO ASSET LASER

SCANNING:

PCSB SBO

Laser Scanning and updating

P&ID for 21 platforms for

PCSB/SBO

April – December

2011

1) EWDP-A

2) EWDP-B

3) EWP-A

4) EWQ-A

5) EWG-A

6) EWV-A

7) KIND-P

8) SMQ-A

9) SMJT-G

10) SMR-A

11) SMG-A

12) SMP-A

13) SMP-B

14) SMP-C

15) SMDP-A

16) SMDP-B

17) SMK-A

18) SMJT-C

19) SMJT-D

20) SMJT-F 21) SMJT-E

SMDP-B MMC/PCSB

Laser Scanning & EDM survey

for Samarang IO project

July – October

2011

FPSO KIKEH SBM

Malaysia

Laser Scanning, Clash Check

design against point cloud, re-Jun-12






End Date

issue IFC.

WEST LUTONG ,

BODP-C OPE/ PCSB

3D Laser Scanning, EDM survey

& Clash Checking

July – December

2012

MCOT & BAP-A OPE / PCSB 3D Laser Scanning, EDM survey

& Clash Checking

July – December

2012

BOKOR PHASE 3

AKER

SOLUTION/

PCSB

Laser Scanning & EDM survey,

Clash Check & issue clash free

model.

June – September

2011

BEKOK A RNZ/PCSB

Laser Scanning, 3D modeling

Clash Check & issue clash free

model.

February – June

2012

BEKOK C

RANHILL

WORLEY/

PCSB

Laser Scanning & 3D modeling February – June

2012

BEKOK A & TIONG A RNZ/PCSB Laser Scanning , EDM survey ,

3D PDMS modeling

February – June

2012

YETAGUN A , B & C

YETAGUN

MYAMMAR Laser Scanning , EDM survey ,

3D PDMS full intelligent

modeling

March -

December 2012 TNS/ PCVL

CKP/CKR CARIGALI

HESS

Laser scanning , 3D modeling ,

Clash checking and re-


June – December

2012

BNDP-I RNZ/

PETROFAC




Jul-12

ANPG-A

RANHIL

WORLEY/

PCSB




Oct-12

ANPG-A MMC/ PCSB




Oct-12

19 PLATFORMS SKO

PIPELINES REJUV

PROJECT:

OPE/ PCSB-

SKO

Laser scanning whole platforms

(19 platforms)

October –

December 2012

1) TKDP-A

2) TKJT-E

3) TKJT-C

4) TKP-B

5) TKJT-F

6) TKJT-D

7) TKJT-G

11) WLDP-C

12) BN-14

13) BNP-A

14) BNDP-B

15) BNP-B

16) BNG-B

17) E11R-A






End Date 8) TKJT-3

9) TKP-A

10) SIMP-A

18) BODP-A

19) BODP-B

TCOT AND OSC PETRONAS

PMO

Laser scanning, 3D full intelligent

modeling, Clash checking and re-

engineering drawings.

May 2013 – May

2014

LEWEK EMAS FPSO

EMAS/

PTSC

VIETNAM

Laser scanning, 3D modeling,


engineering drawings, Assist

HUC.

Jul-14

GEMUSUP KAKAP PETRA/

SHELL

Laser scanning, 3D modeling,


engineering drawings, Assist

HUC.

August 2013 –

May 2014

BADP-B PCSB/

LEIGHTON




drawings

Oct-13

SUDP-A DELEUM /

CETCO

Laser Scanning, TP Survey, £D

Design Model, Clash Report &

Analysis

Apr-14

CKP AND CKR

RNZ /

CARIGALI

HESS

Laser Scanning and Updating

PDMS Model, Spool Audit and

Clash Analysis

Feb-14

D12 & LAILA THHE/

SHELL

Structural Survey and 3D As-

Built Model July-14

BCBF for CKP AND CKR

EPIC /

CARIGALI

HESS

Laser Scanning and Updating

PDMS Model, Spool Audit and

Clash Analysis, Engineering

Rectification by Reproducing

AFC/IFC

August-14





Company’s Experiences (BRUNEI)

Brunei operations start in March 2010 with over 200 projects already undertaken. Below are the some list awarded Project to Infotrax Engineering (Brunei) in the recent year.

PROJECT

NAME

INSTALLATION CLIENT WORKSCOPE START/END

DATE

SCOT

REJUVENATION

PHASE III

SERIA CRUDE OIL

AND TERMINAL

DAMIT

WORLEY

ENGINEERING

3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2013

PIPE

REPLACEMENT

PROJECT (PRP)

-13 PLATFORM

FOR EAST

INSTALLATION

FIELD

-14 PLATFORM

FOR WEST

INSTALLATION

FIELD

DAMIT

WORLEY

ENGINEERING

3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2013-2014

BLNG COGEN II

PROJECT

BRUNEI

LIQUIFIED

NATURAL GAS

(BLNG)

FOSTER

WHEELER 3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2014

ZERO RED

PROJECT

5 PLATFORMS FOR

EAST

INSTALLATION.

TECHNIP 3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2014

ZERO RED

PROJECT

7 PLATFORMS FOR

EAST

INSTALLATION.

SAHID

SDN.BHD 3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2014

CPCX-12 TEST

FACILITY

UPGRADE

PROJECT

CPCX-12 PETROKON

UTAMA

SDN.BHD

3D Laser scanning

Provide Redline

markup

2014

WELL TIE-IN

PROJECT (WTI)

CPDP36

CPDP33

BLWJ01

BUDP01

AMDP09

AMDP17

AMDP25

DAWJ01

FADP01

FADP03

DAMIT

WORLEY CPRA

Theoretical trial

fit/Final fit

Provide redline

mark-up for spool

fabrication.

Spool survey

2014-2015





CPCX-10 TEST

FACILITY

UPGRADE

PROJECT

CPCX-10 PETROKON

UTAMA

SDN.BHD

3D Laser scanning

Provide Redline

markup

2014

AMAP-09 FRESH

WATER MAKER

UPGRADE.

AMAP-09 BRUNEI SHELL

PETROLEUM 3D Laser scanning

Provide Redline

markup for spool

fabrication

Spool survey

2015

CPRP-07 SHUT

DOWN I SCOPE

CPRP-07 AKER

SOLUTION 3D Laser scanning

Provide Redline

markup for spool

fabrication

Spool survey

2015

AMCX-06

REJUVENATION

PROJECT

AMCX-06 DAMIT

WORLEY 3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2015

4 INTELLIGENT

PIGGING PID

PROJECTS

1. AMWJ31

2. AMWJ80

3. AMDP-03

4. AMPP-17

DAMIT

WORLEY EDM Survey , Laser

Scanning ,3D modeling

&Clash check.

2013

AMPA 09 GAS WSF

PROJECT 2011

AMPA 09 DAMIT



&Clash check.

2011

AMPA 09 GAS WSF

PROJECT 2010

AMPA 09 DAMIT



&Clash check.

2010

CWDP01 INTERIM

GAS LIFT HEADER

EXTENSION

CWDP01 DAMIT

WORLEY Assist HUC for

installation. 2011

BNLG- GLASS LEVEL

REPLACEMENT PROJECT

DAMIT

WORLEY

EDM Survey , Laser


&Clash check.

2011

REPAIR ORDER

WORKS

FAPP-03 SKS WOODS EDM Survey , Laser

Scanning ,3D modeling,

update drawings.

2013





Note:

1. We have current long-term project for SHAHID for Well Tie-In EDM Survey

WATERFLOOD

PROJECT 1. CPDP-31

2. CPDP-33

3. CPPP-01

4. CPPP-04

DAMIT

WORLEY

EDM survey ,Laser

Scanning , 3D modeling

Intelligent

2011

SCOT PHASE 1C PUMP

AMRP01 SHAHID EDM Survey , Laser


,Clash check , re-

engineering drawings.

2010

34 WELL TIE IN'S

34 Wells SHAHID EDM Survey , Laser

Scanning & assit HUC

contractor

2011-2015





Company’s Experiences (Overseas) Client Details Project Scope

Name: Aker

Contact: K. Johnston

Tel No. 01224 599000

Esso

FPU Balder

1997 – 1999

This vessel had to be completely refurbished.

We were contracted to prove all Aker design for

clash verification and space management.

Provided designers to assist with project.

Name: APG

Contact: D. Workman

Tel No. 01224 599000

Texaco – Galley

1996 – 1996

This vessel had to be completely refurbished

and 4 new process modules and equipment

installed. We were contracted to prove

engineering studies and produce all pipework

isometrics and supports.

Name: BP Azerbaijan

Contact: Sam McAdam

Azeri West

Production Deck

2004-2006

Build Control and Hook up of Azeri West

platform at SPS yard in Baku Azerbaijan.Team

of 6 surveyors.

Name: Harland & Wolff

Contact: Allan Hayley

Tel No.

New Build

2 Drill Ships

1998 – 1999

We were contracted to supply dimensional

control services to assist Harland & Wolff in the

build of 2 new vessels, i.e. module-ship section

interfaces, super structure to hull and outfitting

of equipment.

Name: Single Buoy Moorings FPSO Falcon

2005

Major upgrade to FPSO Falcon.

Responsible for survey of all new pipe routes

and tie-ins and to position new skid packages.

Fabrication check of all new pipespools.

Name: Husky Energy

Contact: Kevin Johnson

FPSO White Rose

2002-2005

Control and verification of module support

stools and as-build of deck in Korea plus build

control of modules installation in

Newfoundland Canada

Name: Wood Group Engineering

Ian MacKenzie

BP Clair Project

2003 – 2004

Build control of integrated deck to eliminate

offshore hook-up welding.

280 spools installed without any offshore

welding/testing

Name: Single Buoy Moorings FPSO Brasil

conversion

2002

Conversion of tanker to FPSO.

Survey of complete deck layout,pump rooms

and Cargo tanks.Preparation of piping

isometrics/support details

Name: Single Buoy Moorings

FPSO Kuito

upgrade

Angola

2002

Major brownfield modifications to install seven

new modules.Installation corridors and hook-up

pipework controlled.

Name: Brown and Root

Contact: Jim McAllister

Tel No. 01224 777000

Alba Upgrade

Phase I & II

1996 – 1997

Major modifications to existing facilities for

product enhancement All new piping design

proven to eliminate all offshore welding.(over

600 spools)

Name: AIOC (BP Azerbaijan)

Contact: Jim McCallum

BP Shah Deniz

Project

2004-2007

Provide dimensional control services to

complete build of Integrated deck for Shah

Deniz field in Caspian

Name: Bluewater

Contact:

Tel No.

FPSO Uisge Gorm

upgrade

South Africa

Production of structural/piping fabrication

drawings.

Dimensional control support to site, Cape

Town, S.A.





Client Details Project Scope

Name: Bluewater FPSO Bleo Holm

upgrade

1999 – 2001

Major upgrade to FPSO.

As-build of existing brownfield and clash check

of new design.

Name: AIOC

Contact: Derek Patience

BP Azeri Central

Project, Baku

2003 – 2007

Fabrication control of new build jacket and

integrated deck

to ensure first time fit.Survey of loading barge

to confirm clearances.

Name: Amec Group

Contact: T.Telford

FPSO Bonga

Nigeria

2002-2005

Build control at Amec yard Wallsend and

Hook-up

support onshore/offshore Nigeria

Name: PMEX

Contact: I. McGhee

Tel No.

EPC-22

Mexican Gulf

2001-2003

Full Dimensional control of Hook-up

500+ hook-up spools installed with no offshore

welding.

100 % success rate

Name: Marathon Oil

Contact:

Tel No.

Alba Phase 2

Equitorial Guinea

2002-2003

Fabrication control and installation of new

topside, bridge linked to existing Alba platform

Name: Aker Kvaerner

Contact: Brian Laing

Tel No.

Britannia M.P.

Compressor

2003-2004

Full 3D corridor model and clash check of all

new design

Name: AMEC Services

Contact: Tom McQueen

Tel No.

Shearwater Hook-

up

2001-2003

Full control of hook-up.

Jackets/topsides/all interfaces resulting in non-

weld hook-up

Name: BP Exploration

Contact: Alan Stillwell

Tel No.

ETAP Project Elimination of all offshore hook-up welding by

strict build control. 485 hook-up spools installed

with no offshore welding : 100% success rate

Name: BP America

Contact: Joan Costello

Tel No.

Mad Dog Project

Gulf of Mexico

2002-2004

Elimination of all offshore hook-up welding by

strict build control.380 hook-up spools pre-

fabricated and installed

With no offshore weldind : 100% success rate

Name : KBR Ltd

Contact : Bill Dunnitt

FPSO Carratinga

and

FPSO Barracuda

2005-2006

Provision of Construction Manager and

Commissioning

Manager.Provision of line walking team to

establish pre hydrotest completions.

Survey team supplied for hook-up pipework

verification.

Amec Group

Buzzaerd Field

Hook-Up

2005-2007

Support project with DC services to install all

hook-up and carryover pipework and structural

elements

Aker Kvaerner Offshore Partners

Contact Ian Reid

Dumbarton Project

on FPSO GP3

2005

Laser scan of compete process deck and Upper

deck.

To allow feed study for installation of 7 new

process modules and associated tie-ins.

Shell UK

Contact Ashley Burt

Brent Bravo Utility

shaft upgrade :

2006

Laser Scan of 50 mt length of Utility shaft leg

to allow clash check of new platforms and

pipework

Shell UK

Contact Ashley Burt

Brent Delta Utility

shaft upgrade :

2006

Laser Scan of 50 mt length of Utility shaft leg

to allow clash check of new platforms and

pipework

KCA Deutag Drilling Ltd Chirag 1 : Baku Laser scan of Machine deck and Drill Rig levels





Client Details Project Scope

Contact Peter Brackenbrough Azerbaijan : 2006 1-4 to accommodate major upgrade

KBR Production Services Ltd

Aberdeen

Contact Murdo McLeod

Forties Alpha

PWRI

Project : 2006

Laser scan of various areas to allow design of

new PWRI

upgrade

SBM Inc

Contact David Wilkinson

FPSO Schiehallion

Turret mods : 2005

Laser scan within Turret of Schiehallion to

allow design of new equipment and pipework

Marathon Oil UK Ltd

Contact Dave Brocklesby

Brae Alpha Enoch

Project : 2006

Laser scan of various areas to allow design of

new module skids and pipework

Aker Kvaerner Offshore Partners

Contact Ian Reid

Hewene Brim

Water Inj upgrade

project :

2004

Laser scan of extensive deck area and central

pipe rack to allow new feed and design to be

carried out.

Transocean Drilling

Cotact Peter Meikle

Sedco 714 New

Mud Pump

installation

Laser scan of pump room to allow feasibility

study to be carried out for additional mud pump.

Aker Kvaerner (Canada) Ltd

Contact Huntley Nesbitt

White Rose

Additional mods

Dimensional survey within utility shaft to prove

new design routings of various mods

Petrobras (Brazil) P40 Upgrade Laser Scan and 3D model of complete process

module to allow major brown field upgrade

Husky Energy Ltd

Contact Kevin Johnston

FPSO Sea Rose

Nov/Dec 2006

Laser scan of complete Turret internal and

externally to enable production of full PDS

model

Husky Energy Ltd

Contact Kevin Johnston

FPSO Sea Rose

Jan 2007

Laser scan of main deck to assist in feasibility

study for major upgrade

WGE North Sea Ltd

Contact George Campbell

BP Magnus

Cold Start Project

Laser scans of wellbays modules 1 and 2 to

allow long term flowline review.





Customer Testimonials

Client : PETRONAS CARIGALI SDN BHD Project : LASER SCANNING AND 3D AS-BUILT ( MASTER PRICE SERVICE AGREEMENT 3 + 1 CONTRACT ) Location : SARAWAK AND SABAH

EVALUATED AS “ B “ GRADE CONTRACTOR FOR 2014 AND

“A” GRADE CONTRACTOR FOR 2015.





Client : AKER SOLUTIONS Project : LONG TERM AGREEMENT FOR ENGINEERING AND HUC Location : BRUNEI WATER

From: <[email protected]>

Date: 5 January 2016 at 18:08:09 GMT+8

To: <[email protected]>

Cc: <[email protected]>

Subject: Aker Solutions Qualification Score

Dear Shamshur, Thank you for your response to our Supplier Qualification Questionnaire. After evaluation of the qualification questionnaire and all necessary documentation, your

questionnaire has earned a score of 78 out of 100. You have now been categorized as a level A supplier in our Supplier Qualification System. Enclosed, the rating sheet with more information about the score. If any major improvements are launched in your organization, feel free to contact us after which we shall increase your score. Best regards, Shailaja Mali Supplier Approval Aker Solutions

Tel: +91 20 6691 8390 | Mob: +91 99231 07393 [email protected] | www.akersolutions.com

Client: Prosafe Production, Singapore Project: DC Survey requirements for Azurite Project FDPSO, May-Jun’08 On Monday afternoon we completed the installation of the last central Piperack section on board the Azurite vessel. This was quite an achievement, and used a new innovative approach by Prosafe Module Yard team for FPSO Piperack construction and installation. We planned, constructed and assembled the Piperack section in the module yard at Kencana in exactly the same layout as they would be positioned on the vessel. This also included the welded pipework which was set up butt weld to butt weld with only the necessary weld gap separating the pipes. With the use of an experienced third party Dimensional Control company,’Scopus’ we surveyed the as-built positions in the Module Yard and transferred these to the shipyard support stools.






http://www.akersolutions.com/




Working with our module installation group for the Azurite project, ‘Masstrans’, we developed a guide and bumper system that would bring the modules into the exact position that we constructed in Kencana. Utilizing ‘Asian Lift Hercules’ vessel we started lifting Piperack sections on Wednesday as per our schedule and completed the lifting safely and on schedule on sunday afternoon. The result of this innovative method was to save approximately 180 butt welds for Piperack hook-up and more importantly costly use of the quayside crane for spool installation. This method will lead to a major schedule saving for Piperack completion and hook-up to existing systems. This was a great example of teamwork starting with the Prosafe team in the module yard, Kencana our fabricators who set up the modules in their fabrication shop in the vessel position, Masstrans who designed and planned the bumper system and installation method, Asian Lift who carried out the Piperack section lifting and installation, Scopus who aligned the module sections and ensured they would fit, Keppel who landed the modules on the deck and took on board our construction philosophy and the Prosafe Vessel Construction team who organized the installation at the vessel side. Innovation and teamwork combined to bring a great result for the Project, well done to all involved.

Client : PETRONAS CARIGALI SDN BHD Project : WELL TIE IN - HUC Location : SUMANDAK

First and foremost I would like to thanks your team for assisting us during Sumandak Tepi

Well tie-in activity. Indeed application of laser scanning proven to be successful in assisting

us for the scope of work, provided we follow step by step the process. It is also beneficial in

identifying clashes and accurate tie –in which in turn eliminate rework and modification at

site. Just for your info for C07 well tie-in we completed it within one day.

Regards

Mohamad Hafiz B Amran (MHA)

“Design it Right,Operate it Right, Maintain It Right”

Client : PETRONAS CARIGALI SDN BHD Project : HUC – HELIDECK LASER SURVEY Location : BARAM – BADP-B PROJECT MGR : A RASHID A AMIN ( PROJ / EORC )





Pictures attached are

Module Yard construction set-up of Piperacks Piperack section being installed by Asian Lift The installed forward Piperack modules The fit-up achieved after installation (the yellow steel is the temporary bumpers set up in

Kencana to provide the close fit-up and no hook-up spool requirement) Regards Richard Richard Glancy Topsides Delivery Manager Azurite Field development Project Prosafe Production

Client: Carigali - Schlumberger, Malaysia Project: BOKOR Phase II, Development. Jul’08

Gents

See attached photos of the Main Deck Skid Beams fit-up. TLO achieved a very good fit-up thanks to Infotrax Engineering.





It would have been even better if TLO had used flat 'hook' beams but the trouble was due to some weld distortion on the hook beams built in a rush out of scrap. The final result ok though and accepted.

Regards

Tony Clerk – Structural Engineer, Schlumberger

Client: Carigali HESS / EPIC Mushtari Project: Booster Compression Brownfield (BCBF) Modification Location: MTJDA When the master PDMS database declared superseded (which found not reflecting to As-Built), all piping drawings (Design AFC ISO drawing) are required for re-verification compared to the existing condition. Non-As Built PDMS database will expose inaccuracy information in the AFC/IFC drawing production and definitely affect fabrication and installation during HUC.

Benefits:

- Reduce Shutdown (saved 10 days) - Reduce Hot Works - Reduce Hazard Minimum FFW

Regards, Roslan Sallehudin Project Manager Carigali Hess Jayaman Tarmidi Project Manager EPIC Mushtari





Client : DELEUM / PETRONAS CARIGALI /CETCO Project : SUMANDAK BOOSTER PUMP PROJECT Location : SUMANDAK , SABAH

Dear Tengku,

Just to update your team, this Sumandak Booster Pump Project have been discontinued by

PCSB and we have already rig down the system. This pilot project was discontinued due to

after study conducted by PCSB which found that the reservoir aquifer is strong enough to

maintain pressure and production without the booster pump system. Nevertheless, we have

manage to installed and commission the system with success.

We would like to thank you for your team’s support and great work in the design/engineering

phase up to fabrication which help us a lot in our project. We have learn a lot from your

company and look forward on working again with your team in the near future.

Thank you.

Regards,

Mohd Dali Mohd Ismail I Staff Engineer I

Deleum Chemical - HQ

No.2 I Jalan Bangsar Utama 9 I Bangsar Utama I 59000 Kuala Lumpur I Malaysia I

D/L: 603-22957627 I H/P: 012-3945594 I

[email protected] I www.deleum.com I

A member of the DELEUM Group and officially an OPITO certified Company



http://www.deleum.com/




PETRONAS LICENSE













ISO CERTIFICATION










Documents

Infotrax Engineering Company Profile