�

Center for Custom Prosthetics David Trainer Jorge Franco Canales

Maxillofacial Prosthetist Partner/Owner Maxillofacial Prosthetist/Ocularist

 [Retrieved from URL:] https://nweyedesign.com/eyes/prosthetic-care/ [Northwest eye design](Link is external)

Inserting a Prosthetic EyeWith Fingers:

1) Lift upper lid with index finger to create an opening. Gently slide top edge of prosthesis under upper lid.

2) Release upper lid once prosthesis is in. Pull down lower lid and blink until prosthesis sets into position.

With Suction Cup:

1) Attach suction cup to prosthesis by squeezing handle. Lift upper lid and slide top edge of prosthesis under upper lid.

2) Release upper lid and pull down lower lid to seat prosthesis. Squeeze suction cup handle to release. Blink eyelids.

https://nweyedesign.com/eyes/prosthetic-care/

�

Center for Custom Prosthetics David Trainer Jorge Franco Canales

Maxillofacial Prosthetist Partner/Owner Maxillofacial Prosthetist/Ocularist

 [Retrieved from URL:] https://nweyedesign.com/eyes/prosthetic-care/ [Northwest eye design](Link is external)

Removing a Prosthetic EyeWith Fingers:

1) Pull down the lower eyelid with index finger, look up and slide finger towards the ear.

2) Allow the prosthesis to slide out over the lower lid. Gently remove prosthesis with free

hand.

With Suction Cup:

1) Open eyelids, apply suction cup to the prosthesis and squeeze the handle.

When attached, hold handle lightly.

2) Pull down lower lid with finger. Tilt the prosthesis up and out, over the

lower lid. Squeeze suction cup handle to release.

https://nweyedesign.com/eyes/prosthetic-care/

�

Center for Custom Prosthetics David Trainer Jorge Franco Canales

Maxillofacial Prosthetist Partner/Owner Maxillofacial Prosthetist/Ocularist