Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
...automatically better!
L1048
K18088
88
85
85
88
85
85
85858585858585858585
L1048L1048 Rudolstadt
Volkstedt
Bad
BlankenburgSaalfeld
ErfurtJena
Ilmenau Schwarza
Schaala
Electric andAutomation
Systems GmbH
Installation
Service
MATEC
Elektro- und Automatisierungsanlagenbau GmbHFriedrich-Adolf-Richter-Straße 5
07407 Rudolstadt
www.matec-online.com
Tel.: +49 (0) 3672 4676 0
Fax: +49 (0) 3672 4676 222
E-Mail: [email protected]
Weimar
Complete scope of delivery and services also means professional
assembly of all delivered equipment.
The installation and replacement of measuring instruments,
the installation of complex cable carrier systems,
the laying and connection of cables and control air hoses up
to the participation in the loop check are among our services.
Partnerships for a solid foundation.
Electrical installations for industry require a high level of experience
and flexibility. Here we rely on the expertise of our partners.
Project-related training courses (system handling and maintenance)
Plant maintenance
Maintenance contracts
Remote maintenance (PLC and control systems)
Standby or on-call-service
Service … within the idea of service, this word also means
assistance. Assistance for our customers also after the system
was handed over.
Customer Service:
Your way to us
Basic Engineering
Detail Engineering
Construction of Switch Cabinets
Installation
Construction Supervision
Commissioning
Service
Constructionof Switch Cabinets
Basic Engineering Detail Engineering
Loop Check
Process engineering and conceptual design from
process engineering and technological conditions
First cost estimate as basis for investment decision
Development of a task
Plant identification structure
(e. g. KKS – Identification System for Power Plants)
Definition of the different measuring principles
Determining and defining electrical consumers
Panel arrangement drawings
Control cabinet arrangement planning
Develop risk classification and safety concepts
Creating of function diagrams for the control system
Basic engineering is the starting point of every planning phase.
We evaluate the feedback from the consultations with our customer
and act on the results. We build a solid foundation for your project.
Whether it concerns local control stations and signal acquisition,
control cabinets, complete switchgears or server cabinets -
we provide one-stop solutions! Produced and tested to satisfy
the task-specific requirements. Adherence to all national and
international regulations and standards in force and compliance
with customer specifications reigns supreme throughout our processes.
We conduct a factory acceptance test and record the results to
document that the switchboards and/or complete switchgears and
the process control equipment operate according to the specifications.
We have implemented an ISO 9001:2015 compliant quality
management system at all stages of our production processes
Measurement | Regulation | Control
Specify, layout and calculation of measurement instruments,
evaluation devices, control valves and other system components
Data sheets, lists, hook-ups and regulations and instructions
for installation
Requirement specification
Detailed risk- and safety analysis
Continuous revision management
Retrofit | Migration | Optimization
Concept development for plant optimization
Transfer, extending and migration of existing systems
Migration/ Upgrade of controlling systems, visual display systems
and distributed control systems
Control Programs | Visualization
Control concepts with central and/ or decentral signal recording
VGB conform signal recording
Control programs and visualization with Step7, TIA, WinCC, PCS7,
DigiVis, CoDeSys, HIMA-ELOP, DigiTool, ControlBuilder F, CITEC,
INTOUCH, B&R Automation Studio, FlowChief,
Rockwell/ Allen Bradley Studio 5000 and FactoryTalk View SE
Connection to MES and ERP systems
Electrical Engineering
Medium voltage and low voltage systems (TSK, PTSK, MCC)
Emergency power systems (emergency power, UPS), transformer plants
General electrical installations in commercial and public areas
Tender and final planning documents according to HOAI
Construction SupervisionCommissioning
We will not leave you alone!
Practically oriented employees translate their knowledge and experience
into our projects. Our equipment is used in countries all over the world,
our operators communicate in English and Russian.
Construction Supervision | Commissioning
Supervision of project implementation to ensure that the services
supplied are in conformity with the contract and that the generally
accepted engineering standards as well as all relevant
regulations are met.
Coordination between the parties involved in the project
Contact partner for the customer or its construction management team
Constant presence at the construction site
First port of call if problems arise
Schedule monitoring
Keeping of daily construction records
Project handover to the customer, together with all documents such
as Operating Manuals, test protocols, etc.
Loop check during or after the assembly operations
Inspection of all cross connections inside the switchgears
Inspection of all connections on switchboards and external devices
Functional check of all loops
Commissioning
Commissioning of measuring equipment and automation devices
Testing of all hardware locks
Testing of all I/O levels of the automation devices
Functional Test
Commissioning of all software components, software function tests
Adjustment of all measuring equipment and automation devices in
cooperation with the customer or the company operating the equipment
Adjustment of control parameter and limit values
Testing of all automation systems
Trial Operation
Testing for interactions between mechanical and electrical components
Optimisation of the individual control programs
Adjustment of the measuring and automation devices under
production conditions in cooperation with the customer/the company
operating the equipment
Factory Planning
Complete and approved documentations supporting medium and
low-voltage electric power and automation systems - including circuit
diagrams, terminal and cable lists and switch panel arrangement
drawings (EPLAN, ELCAD)
Extending and migration of existing documentations