International Precision Sampling Catalog · 4 Syringe Features VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected] Syringe Features

PrecisionSampling

Catalog

CATALOG 06 INT

®

cj

ML stempel

www.vici .com VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected]

1

ContentsContentsContentsContentsContents

www.vici.com

SYRINGE FEATURESPressure-Lok® syringe features ........... page 2Special features of select models ................. 3Gas/liquid and liquid syringe features ..... 4-5

GAS/LIQUID SYRINGESSeries A .................................................................. 6

Pressurized sample storage with built-inTwist-Lock valve

Series A-2 .............................................................. 7Pressurized sample storage with built-inpush-button valve

Series C .................................................................. 8With optional Chaney adapter

Series D .................................................................. 9Without built-in valve

Mininert syringe valves ..................................... 9Add storage capability to C & D syringes

Magnum ............................................................... 10Pressurized storage for trace sampleisolation

Replacement needles ..................................... 11Replacement components ..................... 12-13

LIQUID SYRINGESSeries C-160 .......................................................14

Basic PTFE plunger tipped microsyringeSeries C-120 .......................................................15

Barrel extension for attaching a vacuumbulb or line

Series CG-130 .................................................... 16Reinforced plunger to prevent bending

Series CGV-130 ................................................. 17Adds a side vent for filling and cleaning

Series D-140 .......................................................18For small volume (1 - 10 µl) injections

Mini-injector .......................................................19For reproducible injections down to .01 µl

HPLC syringes ............................................. 20-21Designs for most injectors

Purge and trap ................................................... 22Premium syringe for environmentalapplications

Replacement needles and componentsfor liquid syringes .............................................23

AUTOSAMPLER AND OEM SYRINGESVarian ....................................................... page 24Perkin Elmer .......................................................25Central Instruments .........................................25

HIGH PRESSURE SYRINGESPressure-Flo® ...................................................... 26

High pressure syringe for cylindersampling

Micro-Flo® ............................................................27For samples up to 500 psi

Replacement componentsfor high pressure syringes .............................27

MININERT™ VALVESGeneral description ....................................... 28Specifications .....................................................28Valves for vials ...................................................28

Leak-tight closures for screw-cap vialsValves with standard tapers ..........................29

Fits standard laboratory glasswareValves with threaded fittings ........................29

Male and female NPT and 1/4-28Replacement parts and accessories ...........29

Septa, tools, needle guidesValves for syringes ............................................29

Add storage capability to a conventionalsyringe

PROBESCentral Instruments .........................................30PTA-30, WS, and DynaTrap Instruments ....31Varian Archon Instruments ............................31

AUTOMATED LIQUID HANDLINGMicro valve for GC and LC NEW ................. 32Hollow plunger syringe NEW ......................33Syringes for diluter/dispensers and

automated instrumentation NEW ...... 33

SUPPORTProduct number index ............................. 34-35Ordering information ......................................36

2

Syringe FeaturesSyringe FeaturesSyringe FeaturesSyringe FeaturesSyringe Features

www.vici.com VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected]

Pressure-Lok® Syringe Features

Pressure-Lok® Syringe FeaturesPTFE Plunger Tip

Plunger tips are fabricated of PTFE, stress-formed by ourown special process to insure a leak-tight seal. The self-lubricating plunger tip stays smooth for the life of thesyringe, with none of the freezing up or residue build-upassociated with conventional all-metal plungers.

PTFE-Sealed Needle

Standard needle attachment includes a barrier sleeveor packing of PTFE on the rear of the needle at the zeropoint. This isolates the sample from the needle cement,preventing possible dissolution of the adhesive or contam-ination of the sample. Many models are also available in aluer-tip version.

Ultra-Smooth Bore

Syringe barrels up to 100 µl are hand-fabricated from high quality borosilicateglass, manufactured to our specifications. The extremely smooth bore preventsundue wear of the plunger tip and insures a smooth, durable seal.

Hand Calibration

Each barrel undergoes a series of quality checks, including hand-calibration ofconsistent volume delivery. After final assembly of each lot, volume delivery ischecked again with an electronic microbalance. These careful steps in qualitycontrol insure that every Pressure-Lok® microsyringe measures up to today’sstringent requirements for precision and accuracy.

Easily Replaceable Parts

Depending on the specific model, some or all of the wear parts can be easilyreplaced, optimizing your equipment investment.

Shaped Rear Flange

All syringes have a rear flange to provide a secure grip and keep the syringefrom rolling.

Low Dead Volume

Every syringe design takes advantage of every opportunity to minimize oreliminate dead volume.

Crisp, Clean Graduations

Our methods insure easy reading of the sampled amount.SAFETY NOTE

To prevent possibleinjury, proper safetyprecautions shouldalways be observedwhen pressurizing glasscylinders such assyringes.

PTFE

Polytetrafluoroethyleneis the generic name forthe class of materialssuch as Teflon® sold byE.I. duPont de Nemours.

3


www.vici.com

Special Features

Special Features of Select ModelsPressurized Sample Storage

Several of our syringes have a built-in valve to allow sample storage at upto 250 psi. This feature also allows pre-pressurization of the sample beforeinjection so that the sample is flushed into the column instantaneously,providing better resolution. For conventional syringes, our Mininert syringevalve adds this capacity.

Removable Needles

Many models offer a special pressure-tight, low dead volume connection tofacilitate easy removal and replacement of needles.

Optional Luer Tip for Convenience

Although our standard PTFE-sealed needle offers superior performance, we alsooffer the added convenience of luer-tip models.

Positive Rear Plunger Stop

If plunger damage from accidental plunger removal has been a problem, selectone of our syringes with this feature.

Reinforced Plunger

If plunger-bending is a problem that contributes to excessive syringe repairbills in your lab, this feature offers a solution.

Side Vent

VICI Precision Sampling offers a unique model with a side vent, allowing easysyringe filling and cleaning.

PRODUCTS WITHTHESE FEATURES

Pressurized SampleStorageGas .............. pages 6 -7, 10High pressure ....... 26-27

Removable NeedlesGas ................................ 6-10Liquid ............... 14, 16, 18

Optional Luer TipGas .............................. 7 -10Liquid ............................. 22

Positive Rear PlungerStopGas ............................ 6-8,10Liquid ...................... 18, 19High pressure ....... 26-27

Reinforced PlungerLiquid ....................... 16-19

Side VentLiquid ............................. 17

SAFETY NOTE

To prevent possibleinjury, proper safetyprecautions shouldalways be observedwhen pressurizing glasscylinders such assyringes.

Custom ProductsAt VICI Precision Sampling, we take great pride in being able to customize ourproducts to fit your needs while maintaining our standards. Call us if you needcustom length needles, special gauge needles, or custom syringes.

4



Syringe Features

PRESSURE-LOK®SYRINGE FEATURES

PTFE plunger tipPTFE-sealed needleUltra-smooth boreHand calibrationEasily replaceable partsShaped rear flangeLow dead volumeCrisp, clean graduations

Syringe FeaturesVICI Precision Sampling syringes have all the standard features noted belowat left, with special features delineated in the charts below.

FEATURES Pressure Removable Luer Sample-Lok Plunger Pagerating needle needle valve type stop

Series A 250 psi twist-lock 6

Series A-2 250 psi push-button 7

Series C 250 psi * 8

Series D 250 psi * 9

Magnum 30 psi twist-lock 10

SAMPLE 25 50 100 250 500 1 2 5 10 20 50 100 250 500SIZES µl µl µl µl µl ml ml ml ml ml ml ml ml ml

Series A

Series A-2

Series C

Series D

Magnum

Gas/Liquid Syringes

* Order a Mininert syringevalve on page 9.

5


www.vici.com

Syringe Features

FEATURES Pressure Removable Fixed Reinforced Plunger Side Pagerating needle needle plunger stop vent

Series C-160 250 psi 14

Series C-120 250 psi 15

Series CG-130 250 psi 16

Series CGV-130 250 psi 17

Series D-140 30 psi 18

Mini injector 19

Purge and trap 250 psi Luer lock 22

SAMPLE .01 .10 1 2 5 10 25 50 100 5 10SIZES µl µl µl µl µl µl µl µl µl ml ml

Series C-160

Series C-120

Series CG-130

Series CGV-130

Series D-140

Mini injector

Purge and trap

Liquid Syringes

6

Gas/Liquid SyringesGas/Liquid SyringesGas/Liquid SyringesGas/Liquid SyringesGas/Liquid Syringes


Series A Pressure-Lok®

Series AIntegral sample storage valve

Actuated by turning the nosepiece

Positive rear flange plunger stopPrevents plunger from blowing out of barrel atelevated pressure

Modular constructionAll components may be quickly disassembled foreasy cleaning or replacement

Leak-tight to 250 psiLiquids and gases

Turn the nosepiece counterclockwise two turns and thevalve is closed. Insert the needle through the septum,then start pushing the plunger as you turn the nosepiececlockwise. Carrier backflushing is eliminated, resulting insharper peaks and better separations. When the plungeris fully depressed, the plunger face comes into firm, flushcontact with the bottom of the front packing, forcingessentially all of the sample out – there is virtually nocompressible dead volume remaining. The very smallinternal diameter of the needle also contributes to thedead volume minimization.

In addition to the characteristics which make it unique,the Series A gas syringe has all the standard Pressure-Lok®features such as a PTFE plunger tip, PTFE-sealed needle,and ultrasmooth bore.

Series A syringes

StandardSample size Prod No

100 µl 010025250 µl 010031500 µl 010032

1 ml 0100332 ml 010034

5 ml 01003510 ml 010036

Replacement needles

Bevel, Side port,open end taper

Package of 3: Prod No Prod No

Standard Pressure-Lok®.029" x .012" x 2.25" 913050 913052

SPECSRemovable needlesBevel, open endRemovable needle size:

.028" x .012" x 2"250 psi max,

gases and liquids

NEEDLE TIPS

Bevel, open end

Side port, taper

Series A, 250 µl#010031

NOTE

Special replacementneedles are availableon request.

Further reference

Replacementcomponents .. page 12

Twist-Lock valveOpen (left) andclosed (right)

7


www.vici.com

Series A-2 Pressure-Lok®

Series A-2All the advantages of the Series A syringe plus:

Push-button valveAllows instantaneous injection

Smaller volumesGreat for small volatile samples

The A-2 features a push-button valve, which allowssample storage to 250 psi in syringes as small as 25 µl.This is useful with small liquid samples containing low-boiling components which would be lost throughevaporation using ordinary syringes.

The positive rear stop (in 250 µl and larger sizes) preventsplunger blowout at elevated pressures, protecting againstsample loss or operator injury. Like the Series A gassyringe, the A-2 has all the standard Pressure-Lok®features such as a PTFE plunger tip, PTFE-sealed needle,and ultrasmooth bore. Replacement components areavailable for easy repair.

Series A-2 syringes

Standard LuerSample size Prod No Prod No

25 µl 050023 05004350 µl 050024 050044

100 µl 050025 050045

250 µl 050031 050051500 µl 050032 050052

1 ml 050033 050053

2 ml 050034 0500545 ml 050035 050055

10 ml 050036 050056

Replacement needles



Standard Pressure-Lok®.029" x .005" x 2" 943050 –.029" x .012" x 2" 943051 943052

Luer.028" x .006" x 2" 943060 –.028" x .012" x 2" 943061 943062

SPECSRemovable needlesBevel, open endNeedle size:

.029" x .005" x 2"(25, 50, and 100 µl)

.029" x .012" x 2"(all other sample sizes)

250 psi max,gases and liquids

Further reference


NEW hollow plungersyringe ................ page 33

Series A-2Standard, 25 µl

#050023

Series A-2Standard, 1 ml

#050033

8



Series C Pressure-Lok®

Series COptional Chaney adapter

Much lower dead volume than luer-style connectors

Perfect syringe for everyday useAll our standard features, but without a valve for pressurizedsample storage

Series C syringes

Standard Standard Luerw/ Chaney adapter

Sample size Prod No Prod No Prod No

100 µl 030025 101430 030045250 µl 030031 101440 030051500 µl 030032 101448 030052

1 ml 030033 101455 0300532 ml 030034 101463 030054

5 ml 030035 101470 03005510 ml 030036 101478 030056

Replacement needles



Standard Pressure-Lok®.029" x .005" x 2" 943050 –.029" x .012" x 2" 943051 –

Chaney adapter.018" x .008" x .75" – 101935


.029" x .005" x 2"

.029" x .012" x 2"250 psi max,

gases and liquids

Series C,Standard needle

2 ml#030034

Series Cw/ Chaney adapter

2 ml#101463

NEEDLE TIPS

Bevel, open end

Side port, taper

Further reference


9


www.vici.com

Series D Pressure-Lok®

Series DAn economically priced high precision gas sampling syringe which offers morefeatures than conventional gas-tight designs:

Leak-tight, Pressure-Lok® plunger tip

No dead volume barrel design

Special low dead volume needle connector for accurate gas samples

Series D syringes


1 ml 040033 0400532 ml 040034 040054

Replacement needles



Standard Pressure-Lok®.029" x .012" x 2" 943051 943052

Luer.028" x .012" x 2" 943061 943062

SPECSRemovable needlesBevel, open endNeedle size:

.029" x .012" x 2"250 psi max,

gases and liquids

Further reference


Series DStandard, 1 ml

#040033

Mininert Syringe ValvesFor Series C and D syringes or conventional luer-tip syringes

Add sample storage capabilityMount a Mininert syringe valve on a standard syringe

Push button operationGreen to open, red to close

For a Series C or D syringe

These convenient add-on valves allow our Series Cand D syringes to store samples at up to 250 psi. Thevalve body is all PTFE, with a stainless steel stem.

Prod No

654050

For a Luer-tip syringe

This model is identical to the valve above, exceptthat it is designed to fit Luer-tip syringes from anymanufacturer and accept traditional Luer needles.

Prod No

654051

10



Magnum SeriesBuilt-in twist-lock valve

Seals the sample (up to 30 psi) during transportationto the analysis site

Up to 500 ml capacityFor sampling low concentration levels

Positive rear plunger stopPrevents plunger from blowing out when contentsare pressurized

The detection of low levels of various environmentalcontaminants can require extraordinarily large samples.Magnum syringes facilitate the trapping of such samplesin remote locations. A built-in valve allows the sample tobe sealed within the syringe, maintaining sample integrityduring transportation to the analysis site.

Magnums have been successfully used to sampleatmospheric contaminants such as sulfur dioxide andoxides of nitrogen at distant points of the earth. Thepositive displacement capability of the durable PTFEplunger seal permits use in a variety of subsequentprocedures involving extraction or concentration of tracecomponents. (With a cryogenic enrichment apparatus,for example.)

The standard termination is a female threaded fitting(1/4-28), which accepts a variety of Cheminert®

connectors or adapters. Specially formed seals permitleak-tight operation to 30 psi (~ 2 atmospheres). Becauseof the obvious danger in overpressurizing any glasscontainer, the internal pressure of a Magnum gas syringeshould never exceed 2 atmospheres.

Magnum syringes


20 ml 060037 06004350 ml 060039 060044

100 ml 060040 060045250 ml 060041 060046500 ml 060042 060047

Replacement needles



Standard Pressure-Lok®.035" x .023" x 2" 953050 953052

Luer.035" x .023" x 2" 953061 953062


.035" x .023" x 2"30 psi max,

gases and liquids

Magnum seriesStandard, 500 ml

#060042

Magnum Series

Further reference


11


www.vici.com

Replacement Needles

Replacement Needles for Gas/Liquid SyringesSlip-on needles for Series A-2, C, and D syringes feature a needle extensionthrough the hub that fits inside the PTFE tip on the syringe. This designeliminates the dead volume inherent in conventional hubbed needles.

Needles are manufactured to exacting tolerances from high precision stainlesssteel tube stock. The point styles and lengths listed below are standard, but weare willing to supply others. Let us know your requirements.

Replacement needles

Package of 3: Bevel, Side port,open end taper

Series Prod No Prod No

A Standard Pressure-Lok®.029" x .012" x 2.25" 913050 913052

A-2 Standard Pressure-Lok®.029" x .005" x 2" 943050 –.029" x .012" x 2" 943051 943052Luer.028" x .006" x 2" 943060 –.028" x .012" x 2" 943061 943062

C Standard Pressure-Lok®.029" x .005" x 2" 943050 –.029" x .012" x 2" 943051 –Chaney adapter.018" x .008" x .75" – 101935

D Standard Pressure-Lok®.029" x .012" x 2" 943051 943052Luer.028" x .012" x 2" 943061 943062

Magnum Standard Pressure-Lok®.035" x .023" x 2" 953050 953052Luer.035" x .023" x 2" 953061 953062

NEEDLE TIPS

Bevel, open end

Side port, taper

12



Replacement Components – Series A, A-2, C, and D

Plunger tips

Series: A A-2 C DSample size Prod No Prod No Prod No Prod No

100 µl 100017 100017 100017 –250 µl 100029 100029 100029 –500 µl 013932 013932 013932 –

1 ml 013933 013933 013933 0139332 ml 013934 013934 013934 0139345 ml 013935 013935 013935 –

10 ml 013936 013936 013933 –

Front packing

Series: ASample size Prod No

100 µl 100010250 µl 100028500 µl 100042

1 ml 1000572 ml 1000705 ml 100086

10 ml 100100

Plunger assemblies

Series: A A-2 C DSample size Prod No Prod No Prod No Prod No

25 µl – 054123 – –50 µl – 054124 – –

100 µl 014425 014425 014425 –250 µl 014431 014431 014431 –500 µl 014432 014432 014432 –

1 ml 014433 014433 014433 0444332 ml 014434 014434 014434 0444345 ml 014435 014435 014435 –

10 ml 014436 014436 014436 –

Further reference

Series A ................. page 6Series A-2 ......................... 7Series C ............................. 8Series D ............................. 9

Replacement Components

13


www.vici.com

Replacement Components – Magnum Series

Barrel assembly

Sample size Prod No

20 ml 06563750 ml 065639

100 ml 065640250 ml 065641500 ml 065642

Front packing

Sample size Prod No

20 ml 06593750 ml 065939

100 ml 065940250 ml 065941500 ml 065942

Standard nosepiece

Sample size Prod No

20 ml 06503750 ml 065037

100 ml 065037250 ml 065041500 ml 065041

Luer nosepiece

Sample size Prod No

20 ml 06504250 ml 065042

100 ml 065042250 ml 065043500 ml 065043

Plunger rod

Includes thumbpiece.

Sample size Prod No

20 ml 06543750 ml 065439

100 ml 065440250 ml 065441500 ml 065442

Plunger tip

Sample size Prod No

20 ml 06553750 ml 065539

100 ml 065540250 ml 065541500 ml 065542

Sleeve, front

Sample size Prod No

20 ml 10028850 ml 100312

100 ml 100333250 ml 100352500 ml 100372

Sleeve, rear

Sample size Prod No

20 ml 10028950 ml 100313

100 ml 100334250 ml 100353500 ml 100373

Stem cap

Sample size Prod No

20 ml 10029850 ml 100298

100 ml 100343250 ml 100343500 ml 100343

Stem cap set screw

Sample size Prod No

20 ml 50063550 ml 500635

100 ml 500635250 ml 500635500 ml 500635

Valve stem

Sample size Prod No

20 ml 10029650 ml 100320

100 ml 100341250 ml 100360500 ml 100379

Valve stem guide

Sample size Prod No

20 ml 10029750 ml 100321

100 ml 100342250 ml 100361500 ml 100361


Further reference

Magnum series,page 10

14

Liquid SyringesLiquid SyringesLiquid SyringesLiquid SyringesLiquid Syringes


Series C-160 Pressure-Lok®

Series C-160PTFE needle seat at rear of needle

Prevents possible dissolution of needle cementor contamination of the sample

Replaceable needlesComplete with integral PTFE seal for a low deadvolume connection and a leak-tight fit

Plunger tip of stress-formed virgin PTFESelf-lubricating and durable


The C-160 offers day-in, day-out dependability at aneconomical price. You also have the choice of fixed orremovable needles.

Series C-160 syringes

Fixed needle Removable needleSample size Prod No Prod No

5 µl 160021 16022110 µl 160022 160222

25 µl 160023 16022350 µl 160024 160224

100 µl 160025 160225

Replacement needles

Bevel,open end

Package of 3: Prod No

.019" x .005" x 2.25" 123050

SPECSFixed and removable

needlesBevel, open endFixed needle size:

.019" x .005" x 2"Removable needle size:

.019" x .005" x 2.25"250 psi max,

gases and liquids

Series C-160, 10 µl#160022

Series C-160, 25 µl#160223

Further reference


15


www.vici.com

Series C-120 Pressure-Lok®

SPECSFixed needlesBevel, open endNeedle size:

.019" x .005" x 2"250 psi max,

gases and liquids

Series C-120Fixed needle

Zero dead volume connection


Extended syringe barrelAttach a bulb or suction line for easier cleaning and filling

In addition to standard Pressure-Lok® features such as PTFE plunger tip andneedle seat, the C-120 offers as standard equipment a barrel extension beyondthe rear flange which permits attachment of a vacuum bulb or line for easierfilling or cleaning.

Series C-120 syringes

Fixed needleSample size Prod No

5 µl 12002110 µl 120022

25 µl 12002350 µl 120024

100 µl 120025

BARRELEXTENSION

Series C-120, 100 µl#120025

Further reference


16



Series CG-130 Pressure-Lok®

Series CG-130, 5 µl#130021

Series CG-130, 10 µl#130222

Series CG-130Reinforced plunger

Eliminates plunger bending

Plunger guide in barrelSmaller front section of plunger is confined withinguide section

Replaceable needlesLow dead volume connection for a leak-tight fit


A heavy, reinforced plunger within an enlarged plungerguide section of the CG-130 barrel virtually eliminatesplunger bending. The smaller front section of the plungeris confined within the guide section even when theplunger is retracted, while the sturdy upper sectionabsorbs the force of a rapid downstroke.

Series CG-130 syringes


5 µl 130021 13022110 µl 130022 130222

Replacement needles

Bevel,open end


.019" x .005" x 2.25" 123050


needlesBevel, open endFixed needle size:

.019" x .005" x 2"Removable needle size:

.019" x .005" x 2.25"250 psi max,

gases and liquids

Further reference


17


www.vici.com

Series CGV-130 Pressure-Lok®

SPECSFixed needlesBevel, open endNeedle sizes:

.029" x .005" x 3.25"

.029" x .008" x 3.25"250 psi max,

gases and liquids

Series CGV-130Side vent

For easy cleaning and filling

Reinforced plungerEliminates plunger bending

Plunger guide in barrelSmaller front section of plunger is confined withinguide section


The CGV-130 features the same rugged construction as the CG-130, withthe addition of a side vent that can be used for filling or cleaning the syringe.A heavy, reinforced plunger within an enlarged plunger guide section of thebarrel virtually eliminates plunger bending. The smaller front section of theplunger is confined within the guide section even when the plunger is retracted,while the sturdy upper section absorbs the force of a rapid downstroke.

Series CGV-130 syringes

.005" ID needle .008" ID needleSample size Prod No Prod No

10 µl 139022 – – –25 µl 139023 – – –50 µl 139024 139124

100 µl 139025 139125

Series CGV-130.005" ID needle

25 µl#139023

18



Series D-140 Pressure-Lok®

Series D-140Total sample displacement

The entire sample is contained in the needle, so it istotally injected when the plunger is depressed

Positive rear plunger stopEliminates accidental plunger removal and resultantdamage

Modular constructionAll parts are replaceable, with easy assembly anddisassembly

The Series D-140 is designed for small volume injection into gas chrom-atographs. Since the sample is totally contained within the needle, it is totallydisplaced by the plunger. Any residual sample or variation in sample size isminimized. (This also means that each size syringe has a different needledesign. When ordering extra needles, be careful to specify the correct one.)

The PTFE seals, needle, plunger, and barrel are all replaceable. (Replacementparts are on page 23.) Thanks to superior alignment, the D-140 can beassembled time after time without difficulty or damage.

Series D-140 syringes

Removable needleSample size Prod No

1 µl 1400112 µl 1400125 µl 140021

10 µl 140022

Replacement needles

Package of 3.Blunt, Bevel, Side port,

open end open end taperSample size Prod No Prod No Prod No

1 µl .019" x .005" x 2.5" 923011 – –2 µl .019" x .008" x 2.5" 923012 – –5 µl .028" x .012" x 2.5" – 923021 –

10 µl .028" x .018" x 2.5" – – 923022

SPECSRemovable needlesSize and style vary

with syringe size30 psi max, liquids only

Further reference


Series D-1400 - 2 µl

#140012

NEEDLE TIPS

1 and 2 µl:Blunt tip, open end

5 µl:Bevel point, open end

10 µl:Side port, taper

19


www.vici.com

Mini Injector Pressure-Lok®

SPECSFixed needleBevel, open endNeedle size:

.028" x .019"

Mini InjectorReproducible sample injections down to 0.01 µl

Without a splitter

Sample carried in the plunger itselfThe groove containing the sample is machined on the plunger, insuringrepeatable results

The Mini Injector is ideal for capillary GC work, allowing reproducible injectionof small samples (down to 0.01 µl) without a splitter. This is possible throughour unique use of a plunger-within-a-needle. The sample volume is carried ina precisely measurable groove ringing the wire plunger, with a durable PTFEpacking to prevent leakage.

In use, the plunger is extended beyond the needle tip and dipped into thesample, where capillary action fills the groove. Then the plunger is drawnthrough a PTFE wiper and back into the needle for protection. When theneedle is inserted into the inlet and the plunger is depressed, the samplecarried on the plunger groove enters the heated zone, where it is flash-vaporized and swept into the column.

Mini injector

Sample size Prod No

.01 µl 170091

.10 µl 170001

Replacement wiper

Sample size Prod No

.01 µl 100667

.10 µl 100667

Mini injector0.01 µl

#170091

20



Pressure-Lok® Syringes for Valco, Cheminert®, and Rheodyne® Valves

Syringes for Valco, Cheminert®, andRheodyne® Valves

Syringes used to fill a loop on a sample injectionvalve have blunt smooth ends. The end of theneedle must contact the bottom of the valve’sfitting detail uniformly and seal on the outside ofthe tip to deliver sample with any repeatability.All VICI Precision Sampling syringes for valveinjections have smooth, burr-free ends that fit thevalve fitting details perfectly. The standard HPLCsyringe is our basic C-160 with a 2" long 22 gaugeneedle.

Syringes


5 µl 160021R 160221R10 µl 160022R 160222R

25 µl 160023R 160223R50 µl 160024R 160224R

100 µl 160025R 160225R

Replacement needles

Blunt tip, open end


22 gauge x 2" 123050R


needlesBlunt tip, open endFixed needle size:

22 gauge x 2"Removable needle size:

22 gauge x 2"250 psi max,

gases and liquids

Further reference

C-160 syringe ... page 14

21


www.vici.com

Special Syringes for Rheodyne® ValvesMany Rheodyne valves allow the syringe needle to rub across the sealing surfaces –a tradeoff in a valve design which avoids having to machine small concentricholes. To prolong the lifetime of these valves, VICI Precision Sampling offers asyringe with a PEEK tip which extends beyond the end of the needle so thatonly PEEK contacts the valve sealing surfaces.

Syringes


5 µl 160021RT 160221RT10 µl 160022RT 160222RT

25 µl 160023RT 160223RT50 µl 160024RT 160224RT

100 µl 160025RT 160225RT

Replacement needles

Blunt PEEK tip, open end


22 gauge x 2" 123050RT

Syringes for Cheminert Nanovolume Injector andWaters U6K Loop InjectorThese injectors require a 26 gauge, 5 cm long needle with a 90° blunt tip andopen end. We recommend mounting the needle on our basic C-160 syringe.(The C-160 is described on page 14.)

Syringes


5 µl 160021WB 160221WB10 µl 160022WB 160222WB

25 µl 160023WB 160223WB50 µl 160024WB 160224WB

100 µl 160025WB 160225WB

Replacement needles

Bevel, open endPackage of 3: Prod No

26 gauge x 5 cm 123050WB


needlesBlunt PEEK tip, openendFixed needle size:

22 gauge x 2"Removable needle size:

22 gauge x 2"250 psi max,

gases and liquids


needlesBlunt tip, open endFixed needle size:

26 gauge x 5 cmRemovable needle size:

26 gauge x 5 cm250 psi max,

gases and liquids

Further reference

C-160 syringe ... page 14

Pressure-Lok® Syringes for Rheodyne®, Cheminert®, and Waters U6K Loop Injectors

22



Purge and Trap Pressure-Lok® Syringes

Purge and Trap SyringeLuer lock

For use with purge and trap analysis

Frosted glass on syringe barrelAllows easy volume reading and accepts writing

Plunger tip of stress-formed virgin PTFESelf-lubricating and durable

Heavy duty rear flangeFlat edges keep the syringe from rolling

The heavy duty construction of our purge and trap syringehelps eliminate costs of replacement and injuries due tobreakage. All of our environmental syringes are repairable.

Syringes

Sample size Prod No

5 ml 03003910 ml 030040

Syringes with push-button valve

Sample size Prod No

5 ml 05003910 ml 050040

SPECSAccepts standard Luerhub needles

Purge and trap syringe5 ml

#030039

23


www.vici.com


Replacement Components – Liquid Syringes

Replacement needles

Package of 3: Blunt, Bevel, Side port,open end open end taper

Series Prod No Prod No Prod No

C-160 .019" x .005" x 2.25" – 123050 –CG-130 .019" x .005" x 2.25" – 123050 –D-140 .019" x .005" x 2.5" 923011 – –

.019" x .008" x 2.5" 923012 –

.028" x .012" x 2.5" – 923021 –

.028" x .018" x 2.5" – – 923022

Plunger assemblies

Series C-160 Series C-120 Series CG-130 Series D-140Sample size Prod No Prod No Prod No Prod No

1 µl – – – 1437112 µl – – – 143712

5 µl 163721 123721 133721 14372110 µl 163722 123722 133722 143722

25 µl 163723 054123 – –50 µl 163724 054124 – –

100 µl 163725 054125 – –

Plunger Packings – D-140 series only

Sample Size Prod No

1 µl 1440112 µl 1440125 µl 144021

10 µl 144022

Further reference

Series C-120 ...... page 15Series C-160 ................. 14Series CG-130 ............. 16Series D-140 ................ 18

NEEDLE TIPS

Blunt tip, open end

Bevel point, open end

Side port, taper

24

Autosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM Syringes


Varian Autosampler Syringes

Autosampler SyringesAll our autosampler syringes conform to specifications supplied bythe manufacturer.

Varian

We supply the syringes for the Varian GC 511, PTA30, PTA30WS, and Archoninstruments.

For Prod No Description Needle Size Ga.

511 1.5 µl 102103 Taper, blunt, .028" x .008" x 2" 225 µl 102100 and open .024" x .006" x 2" 23

50 µl 102102 end needle .024" x .006" x 2" 23

PTA 030038 LuerPTA30WS 030038 fittingDynatrap 030038

Archon 502968 26 ml barrelwith decal

Autosampler syringefor 511-5 µl

#102100

25

Autosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM SyringesAutosampler and OEM Syringes

www.vici.com

Perkin Elmer and Central Instruments Autosampler Syringes

Perkin Elmer

Taper, blunt,& open end

For Size Ga. Prod No

5 µl GC Autosystem .024" x .006" x 70 mm 23 102052.022" x .005" x 70 mm 24 101989

Autosampler syringe for5 µl GC Autosystem

#102052

Central Instruments Co.

Replacement syringes and needles for models GC-311, GC-111, GC-411, andPerkin Elmer models AS100 and AS300.

Syringes Standard Viscous MegaboreSample size Prod No Prod No Prod No

3 µl 500076 501071 5031885 µl 500084 501072 –

10 µl 500090 501073 –

Standard, 3 µl#500076

Needles Standard Viscous MegaboreSample size Prod No Prod No Prod No

3 µl 500081 500994 5027435 µl 500088 501040 –

10 µl 501064 501092 –

Standard, 3 µl#500081

26

High Pressure SyringesHigh Pressure SyringesHigh Pressure SyringesHigh Pressure SyringesHigh Pressure Syringes


Pressure-Flo® Syringes

Pressure-Flo® SyringesSeals at 500 psi

Take high pressure samples from a cylinder or "bomb"

Sample contained in a calibrated needleInjects directly through the GC septum inlet

Use with cylinder adapterLets syringe interface with gas cylinder

The Pressure-Flo high pressure syringe is a tried and true method of takinghomogeneous high pressure samples from a cylinder or “bomb”. It containsthe sample in a calibrated needle with a wire plunger to displace it and PTFEpacking to seal it in, permitting injection of the sample directly through theGC septum inlet for convenience and simplicity.

The body of the syringe is lightweight for easy handling. It houses a specialcrimped PTFE packing which seals firmly at pressures up to 500 psi evenunder severe operating conditions. Threads allow the syringe to make up ona cylinder via the special adapters listed below. Once the syringe is screwedtight, the cylinder valve is opened and the plunger is depressed, extending theneedle into the liquid zone. Once sample is drawn into the syringe, it is storedpressure-tight while the cylinder valve is closed and the syringe is removedfrom the adapter.

To inject the sample, the nose of the syringe is pressed very firmly against theseptum to form a pressure-tight seal. (This requires a minimum 1/8" hole inthe septum cap.) As this is done, the pointed tip of the needle punctures theseptum. When the large handle is pushed in, the needle containing thesample is inserted into the injection port without any loss of contents.

SPECSSpecial integralcalibrated plunger

Needle size:22 gauge

500 psi max,liquids only

Pressure-Flo, 0.5 µl#220005

Bomb adapter1/4" male#240043

Bomb adapter1/4" female

#240041

Pressure-Flo syringes

Sample size Prod No

.5 µl 2200051 µl 2200112 µl 220012

5 µl 22002110 µl 220022

Bomb adapters

Prod No

Fitting (NPT)1/8" female 2400401/4" female 240041

1/8" male 2400421/4" male 240043

Further reference


27

High Pressure SyringesHigh Pressure SyringesHigh Pressure SyringesHigh Pressure SyringesHigh Pressure Syringes

www.vici.com

Micro-Flo® Syringes

SPECSAnnular needleSide port, tapered,

open endNeedle size:

.028" x .006" x1.875"500 psi max,

gases and liquids

Micro-Flo® SyringesMetal-encased syringe with PTFE seals

For hard-to-handle volatile liquids and liquified gases

Special locking cylinder adapter and yoke assemblyThe syringe contacts the sample liquid in its pure, undisturbed state

Sample Lok valveSeals in volatile materials at pressures up to 500 psi

Variable volume0.5 to 5.0 µl

The Micro-Flo high pressure syringe prevents evaporation of lighter com-ponents under normal laboratory temperatures at atmospheric pressure. Thesyringe is encased in metal, with positive PTFE seals and positive plunger stops.The front end houses a special micro-volume annular needle with less than.05 µl dead volume and a positive mechanical valve to seal in volatile materials(up to 500 psi).

Micro-Flo syringes

Prod No

Syringe 230051Adapter 230250

Replacement Components for High Pressure SyringesPressure-Flo series

Sample size: 0.5 µl 1 µl 2 µl 5 µl 10 µlProd No Prod No Prod No Prod No Prod No

Plunger assembly 220315 220311 220312 220321 220322

Sample size: 0.5 µl 1, 2, 5, and 10 µlProd No Prod No

Needles 220351 220352Plunger packing 100800 220347Front packing assy 220344 220344

Micro-Flo series

Prod No

Needle 100838Plunger assembly 100854Front packing 100828Barrel with decal 100827Rear washer 100826Spring 100830

Cylinder adapter and yoke assembly

Prod No

Syringe side packing 100844Plunger pin rod assembly 100846Plunger pin side packing 100848

Micro-Flo syringe#230051

Micro-Floadapter#230250

28

MininerMininerMininerMininerMininert™ t™ t™ t™ t™ VVVVValvalvalvalvalve se se se se s


General Description

Mininert™ ValvesLeak-tight closure with syringe access

Take a sample with no exposure of vial contents to the atmosphere

Models for virtually any laboratory glasswareScrew-cap and crimp-top vials, test tubes, flasks, reaction chambers,1/4-28 or pipe thread

EconomicalSave time and money through conservation of reagents, etc.

Replaceable septumEasily replaced with no exposure of contents to atmosphere

Simple installationNo tools required

Mininert push-button valves are highly dependable, leak-tight closures forscrew-cap vials and other laboratory containers. When used with a glass vial,only PTFE and glass are in contact with the contents. Their unique featuresmake Mininert valves the ideal closure for calibration standards, air- ormoisture-sensitive fluids, derivatizing reagents, volatile chemicals, etc.

Operation is extremely simple – push the green button to open the valve,insert the needle through the septum and take a sample, withdraw the needle,and push the red button to close the valve.

SPECS

TEMPERATURE

Mininert valves can beused at temperature upto 105°F. However, afteruse at high temperatures,the valve may leakslightly when cooledto room temperature.

PRESSURE

The sealing ability ofMininert valves is morethan adequate tocontain most volatileliquids and gases atlow pressures. Mininertvalves have been usedas high as 120 psi with-out leakage, but this isNOT a recommendationfor pressurizing glasscontainers to theselevels. Suchpressurization of glasscontainers can beextremely dangerous.

CHEMICALRESISTANCE

PTFE is highly inert andmay be used with mostcommon materials. Itis particularly usefulfor working with mostacids and organicsolvents. However,problems may beencountered whenused withorganometallics andsome strong bases.We recommend actualexposure test beforeuse with any material.

Valves for vials

The screw-cap Mininert is available in a variety of sizes.The crimp-top valve for 13 mm ID glassware slides intothe neck of the vial and features a threaded flange whichis turned to provide a leak-tight fit.

Pkg/12: Cap / thread size Prod No

13 mm-425 61415815 mm-425 614160

18 mm-400 61416120 mm-400 61417024 mm-400 614163

Crimp top 614250

29

MininerMininerMininerMininerMininert™ t™ t™ t™ t™ VVVVValvalvalvalvalve se se se se s

www.vici.com

Valves and Septa

Valves with standard tapers

The laboratory taper model brings Mininert convenience and ease to a varietyof applications using standard laboratory glassware, such as reaction chambers,test tubes, and other glass systems.

Taper Prod No

14/20 62110219/22 621103

Valves with threaded fittings

Our threaded designs offer positive on/off fluid control as an in-line valveor syringe access as a termination valve at a sample point. In-line valves are1/4-28 male to male or 1/4-28 female to female. Termination valves areoffered in 1/4-28 male or female and 1/8" NPT male or female.In-line valves Prod No

1/4-28 male to male 6312051/4-28 female to female 631206

Termination valves

1/4-28 male 6312011/4-28 female 631203

1/8" NPT male 6312021/8" NPT female 631204

Replacement septa and septum installation tool

These silicone septa fit all Mininert valves. The installation tool is a handydevice for quickly removing and replacing needle seal septa.

Prod No

Septa, pkg/50 644350Installation tool 644850

Mininert syringe valves

These convenient add-on valves allow our Series C and D syringes to storesamples at up to 250 psi. The valve body is all PTFE, with a stainless steel stem.Also available to fit luer-tip syringes from any manufacturer.

Prod No

For C or D syringe 654050For Luer-tip syringe 654051

30

ProbesProbesProbesProbesProbes


GC and LC Probesfor Central Instruments AutosamplersProbes are used to transfer liquid sample from a sample vial to the injectionsyringe by pressurizing the sample vial with helium.

GC probes

Prod No

GC-111H 500031GC-111V 500100GC-311V 500100GC-411V 500100GC-311H 500441

Perkin-ElmerAS-300 500523

LC probes

Prod No

LC-241 42 position 500335LC-241 60 position 500301

LC and GC Probes

31

ProbesProbesProbesProbesProbes

www.vici.com

Varian Probes

PTA-30, WS, and DynaTrap Instruments

Prod No Prod No

Syringe probe assembly 502971 – – –

With fittings Without fittingsProd No Prod No

Needle purge upper probe 505193 505118Upper soil probe assembly 505032 503840

Varian Archon Instruments

With fittings Without fittingsProd No Prod No

Water probe assembly 505739 505828Water probe (old style) 505491 505831

Soil probe assembly 505490 505830Needle purge probe assembly 505741 505829

Syringe probe assembly#502971

Needle purge probe assemblywithout fittings

#505829

32

Liquid HandlingLiquid HandlingLiquid HandlingLiquid HandlingLiquid Handling


Micro Valves for GC and LC200 psi, .060" bore

Compact 1" design

Convenient panel mount

Variety of configurations

Simplify your liquid or gas handling application with a VICIPrecision Sampling Micro valve. The unique design of thefitting detail allows a leak-free seal with no potential forrotor damage from overtightening. Internal parts are PEEK®and PTFE.

Micro valves for GC and LC1/4-28

Prod No

“T” flow path3 ports 6601004 ports 660110

180° flow path2 ports 6602004 ports 660210

90° flow path2 ports 6603003 ports 6603104 ports 660320

SPECS200 psi.060" bore1/4-28 fitting detailAll polymer-basedmaterials

NEW!

Micro Valves

(Fittings not included)

2 PORT 4 PORT3 PORT

90°

4 PORT3 PORT

�T�

2 PORT 4 PORT

180°

33

Liquid HandlingLiquid HandlingLiquid HandlingLiquid HandlingLiquid Handling

www.vici.com

Hollow Plunger SyringeHollow, flow-through plunger with integrated 3-way valve

Push button on/off valve at the front end

For liquids and gases

The new VICI Precision Sampling hollow plunger syringe (patent pending) withtwo integrated valves opens a whole new world of application possibilities:

• Dispense a viscous sample more easily by introducing it into the rear of thesyringe instead of drawing it up through the needle.

• Eliminate sample-to-sample cross contamination by giving the syringe athorough cleaning with a rinse introduced through the plunger.

• Sample continuously without ever withdrawing the needle from the originalpoint of entry. Just close the on/off valve after drawing sample through theneedle, and the sample is redirected out the plunger valve as the plunger isdepressed.

Using this syringe typically involves less plunger manipulation than doing thesame operation with a standard syringe, so you get the additional benefits ofsaved time and reduced plunger wear.

Hollow plunger syringes 100 µl - 250 µl

Prod No

100 µl 020025250 µl 020031

NEW!

6/32 UNCFEMALE THREAD

Specialized Syringes

NEW!

Syringes for Diluter/Dispensers andAutomated Instrumentation

Plunger with 6/32 UNC female thread

Accepts male end fitting on Hamilton Microlab® diluters

This plunger style works for the most common diluter/dispenser and automated robotic instrumentation. Theend fitting termination is without slots.

Instrumentation syringes 250 µl - 1 ml

Prod No

250 µl 180031500 µl 180032

1 ml 180033

PTFE TIPPEDLUER LOCK TERMINATION

Further reference

Replacementneedles ............... page 7

SPECSMultivalve selection,

2-way, 3-wayRemovable needles200 psi max,

gases and liquids

34

SupportSupportSupportSupportSupport

www.vici .com VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected]

010025 ................................. page 6010031 ............................................. 6010032 ............................................. 6010033 ............................................. 6010034 ............................................. 6010035 ............................................. 6010036 ............................................. 6013932 .......................................... 12013933 .......................................... 12013934 .......................................... 12013935 .......................................... 12013936 .......................................... 12014425 .......................................... 12014431 .......................................... 12014432 .......................................... 12014433 .......................................... 12014434 .......................................... 12014435 .......................................... 12014436 .......................................... 12020025 .......................................... 33020031 .......................................... 33030025 ............................................. 8030031 ............................................. 8030032 ............................................. 8030033 ............................................. 8030034 ............................................. 8030035 ............................................. 8030036 ............................................. 8030038 .......................................... 24030039 .......................................... 22030040 .......................................... 22030045 ............................................. 8030051 ............................................. 8030052 ............................................. 8030053 ............................................. 8030054 ............................................. 8030055 ............................................. 8030056 ............................................. 8040033 ............................................. 9040034 ............................................. 9040053 ............................................. 9040054 ............................................. 9044433 .......................................... 12044434 .......................................... 12050023 ............................................. 7050024 ............................................. 7050025 ............................................. 7050031 ............................................. 7050032 ............................................. 7050033 ............................................. 7050034 ............................................. 7050035 ............................................. 7050036 ............................................. 7050039 .......................................... 22050040 .......................................... 22050043 ............................................. 7050044 ............................................. 7050045 ............................................. 7050051 ............................................. 7050052 ............................................. 7050053 ............................................. 7050054 ............................................. 7050055 ............................................. 7050056 ............................................. 7054123 ................................... 12, 23054124 ................................... 12, 23

054125 .............................. page 23060037 .......................................... 10060039 .......................................... 10060040 .......................................... 10060041 .......................................... 10060042 .......................................... 10060043 .......................................... 10060044 .......................................... 10060045 .......................................... 10060046 .......................................... 10060047 .......................................... 10065037 .......................................... 13065041 .......................................... 13065042 .......................................... 13065043 .......................................... 13065437 .......................................... 13065439 .......................................... 13065440 .......................................... 13065441 .......................................... 13065442 .......................................... 13065537 .......................................... 13065539 .......................................... 13065540 .......................................... 13065541 .......................................... 13065542 .......................................... 13065637 .......................................... 13065639 .......................................... 13065640 .......................................... 13065641 .......................................... 13065642 .......................................... 13065937 .......................................... 13065939 .......................................... 13065940 .......................................... 13065941 .......................................... 13065942 .......................................... 13100010 .......................................... 12100017 .......................................... 12100028 .......................................... 12100029 .......................................... 12100042 .......................................... 12100057 .......................................... 12100070 .......................................... 12100086 .......................................... 12100100 .......................................... 12100288 .......................................... 13100289 .......................................... 13100296 .......................................... 13100297 .......................................... 13100298 .......................................... 13100312 .......................................... 13100313 .......................................... 13100320 .......................................... 13100321 .......................................... 13100333 .......................................... 13100334 .......................................... 13100341 .......................................... 13100342 .......................................... 13100343 .......................................... 13100352 .......................................... 13100353 .......................................... 13100360 .......................................... 13100361 .......................................... 13100372 .......................................... 13100373 .......................................... 13100379 .......................................... 13100667 .......................................... 19

100800 .............................. page 27100826 .......................................... 27100827 .......................................... 27100828 .......................................... 27100830 .......................................... 27100838 .......................................... 27100844 .......................................... 27100846 .......................................... 27100848 .......................................... 27100854 .......................................... 27101430 ............................................. 8101440 ............................................. 8101448 ............................................. 8101455 ............................................. 8101463 ............................................. 8101470 ............................................. 8101478 ............................................. 8101935 ...................................... 8, 11101989 .......................................... 25102052 .......................................... 25102100 .......................................... 24102102 .......................................... 24102103 .......................................... 24120021 .......................................... 15120022 .......................................... 15120023 .......................................... 15120024 .......................................... 15120025 .......................................... 15123050 ............................ 14, 16, 23123050R ....................................... 20123050RT ..................................... 21123050WB ................................... 21123721 .......................................... 23123722 .......................................... 23130021 .......................................... 16130022 .......................................... 16130221 .......................................... 16130222 .......................................... 16133721 .......................................... 23133722 .......................................... 23139022 .......................................... 17139023 .......................................... 17139024 .......................................... 17139025 .......................................... 17139124 .......................................... 17139125 .......................................... 17140011 .......................................... 18140012 .......................................... 18140021 .......................................... 18140022 .......................................... 18143711 .......................................... 23143712 .......................................... 23143721 .......................................... 23143722 .......................................... 23144011 .......................................... 23144012 .......................................... 23144021 .......................................... 23144022 .......................................... 23160021 .......................................... 14160021R ....................................... 20160021RT ..................................... 21160021WB ................................... 21160022 .......................................... 14160022R ....................................... 20160022RT ..................................... 21160022WB ................................... 21

160023 .............................. page 14160023R ....................................... 20160023RT ..................................... 21160023WB ................................... 21160024 .......................................... 14160024R ....................................... 20160024RT ..................................... 21160024WB ................................... 21160025 .......................................... 14160025R ....................................... 20160025RT ..................................... 21160025WB ................................... 21160221 .......................................... 14160221R ....................................... 20160221RT ..................................... 21160221WB ................................... 21160222 .......................................... 14160222R ....................................... 20160222RT ..................................... 21160222WB ................................... 21160223 .......................................... 14160223R ....................................... 20160223RT ..................................... 21160223WB ................................... 21160224 .......................................... 14160224R ....................................... 20160224RT ..................................... 21160224WB ................................... 21160225 .......................................... 14160225R ....................................... 20160225RT ..................................... 21160225WB ................................... 21163721 .......................................... 23163722 .......................................... 23163723 .......................................... 23163724 .......................................... 23163725 .......................................... 23170001 .......................................... 19170091 .......................................... 19180031 .......................................... 33180032 .......................................... 33180033 .......................................... 33220005 .......................................... 26220011 .......................................... 26220012 .......................................... 26220021 .......................................... 26220022 .......................................... 26220311 .......................................... 27220312 .......................................... 27220315 .......................................... 27220321 .......................................... 27220322 .......................................... 27220344 .......................................... 27220347 .......................................... 27220351 .......................................... 27220352 .......................................... 27230051 .......................................... 27230250 .......................................... 27240040 .......................................... 26240041 .......................................... 26240042 .......................................... 26240043 .......................................... 26500031 .......................................... 30500076 .......................................... 25500081 .......................................... 25500084 .......................................... 25

Product Number Index

35


www.vici .com

Product Number Index

501064 .............................. page 25501071 .......................................... 25500088 .......................................... 25500090 .......................................... 25500100 .......................................... 30500301 .......................................... 30500335 .......................................... 30500441 .......................................... 30500523 .......................................... 30500635 .......................................... 13500994 .......................................... 25501040 .......................................... 25501072 .......................................... 25501073 .......................................... 25501092 .......................................... 25502743 .......................................... 25502968 .......................................... 24502971 .......................................... 31503188 .......................................... 25503840 .......................................... 31505032 .......................................... 31505118 .......................................... 31505193 .......................................... 31505490 .......................................... 31505491 .......................................... 31505739 .......................................... 31505741 .......................................... 31505828 .......................................... 31505829 .......................................... 31505830 .......................................... 31505831 .......................................... 31614158 .......................................... 28614160 .......................................... 28614161 .......................................... 28614163 .......................................... 28614170 .......................................... 28614250 .......................................... 28621102 .......................................... 29621103 .......................................... 29631201 .......................................... 29631202 .......................................... 29631203 .......................................... 29631204 .......................................... 29631205 .......................................... 29631206 .......................................... 29644350 .......................................... 29644850 .......................................... 29654050 ...................................... 9, 29654051 ...................................... 9, 29660100 .......................................... 32660110 .......................................... 32660200 .......................................... 32660210 .......................................... 32660300 .......................................... 32660310 .......................................... 32660320 .......................................... 32913050 ...................................... 6, 11913052 ...................................... 6, 11923011 ................................... 18, 23923012 ................................... 18, 23923021 ................................... 18, 23923022 ................................... 18, 23943050 ................................. 7, 8, 11943051 ................................. 7-9, 11943052 ................................. 7, 9, 11943060 ...................................... 7, 11

943061 ............. pages 7, 9, 11, 22943062 ................................. 7, 9, 11953050 ................................... 10, 11953052 ................................... 10, 11953061 ................................... 10, 11953062 ................................... 10, 11


36 www.vici.com


VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected]

UNITED STATES, CENTRALand SOUTH AMERICA,JAPAN, AUSTRALIA, andNEW ZEALAND

VICI PRECISION SAMPLING

Phone: (800) 828-1653(225) 927-1128

Fax: (225) 926-4631(225) 923-1331

Email: [email protected]

VICI Precision Sampling, Inc.P.O. Box 15886Baton Rouge, LA 70895-5886

F.O.B. shipping point, our factory,Baton Rouge, Louisiana.

We accept:

To order

EUROPE, AFRICA,MIDDLE EAST, andASIA (except Japan)

VICI AG INTERNATIONAL

Phone: Int + 41- 41- 925-6200Fax: Int + 41- 41- 925-6201Email: [email protected]

Parkstrasse 2CH-6214 SchenkonSwitzerland

EXW shipping point, our factory,Schenkon, Switzerland.

We accept:

CANADA

VICI VALCO INSTRUMENTSCANADA CORPORATION

Phone: (866) 297-2626(613) 342-2600

Fax: (613) 342-0111Email: [email protected]

26 Water Street EastBrockville, OntraioCanada K6V 1A1

F.O.B. shipping point, our factory,Brockville, Canada.

We accept:

Conditions of SaleOur terms are net 30 days.F.O. B. shipping, our factory,

Baton Rouge, LA.Prices subject to change without

notice.All prices are in U.S. dollars.

Repairs/Technical SupportFor information about factoryrefurbishment or for assistancewith your technical questions andapplication needs, contact ourSales Department.

Phone: (225) 927-1128Fax: (225) 926-4631Email: [email protected]

NoticeVICI reserves the right to correcterrors and change prices, designs,or specifictions without notice orliability. The information in thiscatalog is correct to the best ofour knowledge but is not guar-anteed to be so. VICI assumesno responsibility with respectthereto.

ReturnsNo returns will be accepted morethan 90 days after shipment forany reason. Before 90 days, noreturns will be accepted withoutprior authorization. If it is necess-ary to return material to us, pleasecontact our Sales Department for areturn authorization number andforwarding instructions. Inspectshipments upon receipt and reportshortages or incorrect or damagedmaterial to us immediately.

Important!Damaged shipments must remainwith the original packaging forfreight company inspection.

Returned material will be subjectto a minimum restocking fee of15% for catalog items. Specialorders cannot be returned unlessdefective.

WarrantyVICI Precision Sampling warrantsall products we manufacture to befree from defects in material and/or workmanship for thirty daysfrom the time of receipt by thecustomer.VICI Precision Sampling´s liabilityfor defects in material or work-manship shall be limited toreplacement of the defective itemat no charge to the customer, orrefund of the purchase price paid.Bending, breakage, or otherdamage resulting from shippingis not a warranty issue; a claimshould be filed with the shippingcompany. This warranty is in lieuof any other warranties, expressedor implied, including but notlimited to any warranty of fitnessfor purpose or any warranty ofmerchantability. Copies of anywritten warranty pertaining toproducts shown in this catalogmanufactured by a company otherthan VICI Precision Sampling canbe obtained upon written request.

Ordering Information


www.vici .com

TRADEMARKSCheminert Valco Instruments Co. Inc.

and VICI AGHamilton HamiltonHastelloy C Haynes InternationalMicro-Flo Valco Instruments Co. Inc.Microlab HamiltonMininert Valco Instruments Co. Inc.PEEK VictrexPerkin Elmer Perkin Elmer Inc.Pressure-Flo Valco Instruments Co. Inc.Pressure-Lok Valco Instruments Co. Inc.Rheodyne RheodyneRyton Phillips Petroleum Co.Varian Varian AssociatesVICI Valco Instruments Co. Inc.

and VICI AGWaters Waters Associates

©2006 by VICI Precision Sampling, Inc.

VICI AG InternationalParkstrasse 2CH-6214 SchenkonSwitzerland

Phone: Int + 41- 41- 925-6200Fax: Int + 41- 41- 925-6201Email: [email protected]

Documents

International Precision Sampling Catalog · 4 Syringe Features VICI AG International Sales: Int + 41-41-925-6200 Fax: Int + 41-41-925-6201 Email: [email protected] Syringe Features