Upload
tranxuyen
View
240
Download
0
Embed Size (px)
Citation preview
Extraoral Appliances ........................................................................................................................ Page 260
Elastic Auxiliaries ............................................................................................................................. Page 268
Oral Screens...................................................................................................................................... Page 273
OrthoSafe Sports Guard .................................................................................................................. Page 274
SUS2 - Sabbagh Universal Spring .................................................................................................... Page 275
Herbst® Bite Jumping Hinges .......................................................................................................... Page 277
Accessories ....................................................................................................................................... Page 281
252
Intra- and Extraoral
tomas® – Anchorage System
magic® – Lingual System
Brackets
Buccal Tubes
Bands
Adhesives
Wires · Arches · Accessories
Intra- and Extraoral
Supplies
Expansion Screws
Orthodontic Acrylics
Pliers · Instruments
Equipment
Dynamics of Orthodontics, o-atlas
Courses
Service
Intra- and Extraoral Appliances For every treatment technique
253
Intra- and Extraoral
254
Intra- and Extraoral
For every treatment technique
Intra- and Extraoral Appliances
Complete ordering program Covering all areas of treatment Dentaurum’s complete program of intra- and
extraoral products ranges from simple elastics or separators for intraoral use to neck bands and innovative appliances such as the well proven Herbst® Bite Jumping Hinge or the inno-vative Sabbagh Universal Spring (SUS2). Giving the practitioner a variety of choices for this particular segment.
Good quality Safety for both practitioner
and patient During the development, production and selec-
tion of all intra- and extraoral products, great care is taken in order to comply with the pro-verbial Dentaurum quality. Not only does this guarantee a high degree of assurance for the practitioner and patient, but it also enables time saving and effective application.
A selection of our product program
Dentalastics® plastic chains and ligatures To secure arches and brackets Dentalastics® plastic chains and ligatures are available in many sizes and colors,
according to use and patient preference.
Dentalastics® separators For quick and easy separation of teeth Dentalastics® separators are available in various diameters for anterior and
posterior teeth. With x-ray contrast effect for easy identification in x-ray pictures.
Elastic auxiliaries Available in many colors, diameters and in various forces This assortment also has a large selection of different varieties. Together they
are all of excellent quality and marked by their high elasticity and low fatigue. Apart from the various colors, diameters and forces there are also latex-free alternatives for patients with latex allergies.
“Elasto-Force“ plastic chains With and without connectors ”Elasto-Force“ and SUPER ”Elasto-Force“ plastic chains are available in various
colors and pull forces, with and without connectors. The “Super” variation’s distinct properties are its consistent pull force and long period of effectiveness with high elasticity and good Shape-Memory-Effect (elastic recovery).
255
Intra- and Extraoral
Optimized design Excellent stability with
unrestricted jaw mobility The modified dual-funnel design of the telesco-
pic rod head combined with the new conical design of the arch adapter provides maximum transversal mobility with ideal sagittal stability. The universal size and simple, progressive acti-vation ensure efficient handling.
Dual function One appliance –
multiple indications Due to its dual function principle the SUS2 can
be used for a great variety of indications, eg ventral jumping of the bite (Herbst® effect), molar distalization (headgear substitute) or temporomandibular dysfunctions. All types of treatment have the added advantage of excel-lent patient comfort.
Herbst® is a registered trademark of Dentaurum.
Improved treatment for Class I !
256
Intra- and Extraoral
257
Intra- and Extraoral
The SUS2 – Sabbagh Universal Spring is a telescope unit with a spring for universal intermaxillary use. It produces constant, mainly horizontal forces when the mouth is closed. The SUS2 is gentle on the temporomandibular joints and helps to avoid extractions and dysgnathic operations.
SUS2 – Sabbagh Universal Spring Indications:
Ventral jumping the bite for correcting distoclusions (activator effect, Herbst® effect)
Unilateral distoclusion/ laterognathia
Molar distalization (headgear substitute)
Space closing (aplasia)
Dentoalveolar compensation of the occlusion (elastics substitute)
Temporomandibular dysfunction (repositioning effect)
SUS2 – Sabbagh Universal Spring The ideal solution for patients with:
Poor cooperation
Minimal residual growth
Illnesses of the upper respiratory tract or asthma
Allergy to acrylic components
258
Intra- and Extraoral
Active treatment period: 6-8 months Fast therapy It usually takes six to eight months to achieve
a neutral relation. The best time to start treat-ment is in the middle of the growth spurt at puberty. The concluding retention period with a removable appliance will also be short.
Fixed therapy 100 % patient compliance A well-known topic: poor patient compliance
and as a result more time-consuming and less effective therapy. The solution with Herbst® guarantees that the appliance will be worn. This form of therapy is also more convenient for the patient, because it is unnecessary to wear the uncomfortable and unsightly headgear.
Herbst® is a registered trademark of Dentaurum.
Safe, proven, effective
The fast therapy for distal occlusion
259
Intra- and Extraoral
Herbst® Bite Jumping Hinges Classic correction of distal occlusions Dentaurum‘s program consists of 4 variations to the well proven Herbst® bite jumping hinge. They all share the
same high mechanical stability and very good design, which enables them to withstand considerable forces and still have enough reserves for an effective orthodontic treatment.
Herbst® IV Bite Jumping Hinge The modified Herbst® bite jumping hinge. Base and socket hinge with ”C“ clip for great lateral movement and greater patient comfort.
With ball and socket joint High degree of movement of the lower jaw This solution with a small head offers a new dimension of lower jaw movement in therapy with Herbst® bite
jumping hinges. The Herbst® IV ball and socket joint is far more comfortable for the patient.
With C-clips Secure therapy The C-Clips have eliminated two weak points in the classical model of Dentaurum Herbst® bite jumping
hinges: time-consuming screw placement and screws accidentally coming loose. This type is easier to handle but most of all it offers more security.
Herbst® I Bite Jumping HingeThe modified Herbst® bite jumping hinge. Base and socket hinge with ”C“ clip for great lateral movement and greater patient comfort.
Available for band and cast techniques Flexible and individual therapy Depending on the experience and the goal of the orthodontist, the Dentaurum Herbst® technique can be used
for band or cast techniques. This means maximum flexibility and allows customised applications.
Herbst® II Bite Jumping Hinge The modified Herbst® bite jumping hinge for use with fixed appliances.
Herbst® TS Bite Jumping Hinge This model is fitted with an internal telescope, which prevents the hinge from sliding apart.
260
High-Pull Headgear with Safety ModulesThe traction modules on the cervical pads and high pull headgear help to prevent accidental dislodging of the face bow. When a pulling force exceeds (approx. 2.5 - 3 kg / 5.5 - 6.6 lbs.) the traction modules separate automatically disengaging the face bow, preventing any whip-back (e.g. of the face bow). Reassembly is easy for either patient or parent. The traction module released by the clip is simply pushed back into position. Headgear should always be used with safety modules.
Items supplied: High-pull headgear in blue denim material with safety modules.
Spring force: light to 4.5 N (450 g)
Module: white High-pull headgear: blue denim
745-024-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Spring force: medium to 6 N (600 g)
Module: dark blue High-pull headgear: blue denim
745-025-00 1 piece
Spring force: strong to 7.5 N (750 g)
Module: light blue High-pull headgear: blue denim
745-026-00 1 piece
High-Pull Headgear without Safety ModulesHeadgear and neck pads must always be used with safety modules.
High-pull headgear: blue denim
745-027-00 1 piece
High-pull headgear: blue cotton 745-031-00 1 piece
261
High-Pull Headgear without Safety ModulesHeadgear and neck pads must always be used with safety modules.
High-pull headgear: pink cotton
745-032-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Neck Pad with Safety ModulesThe traction modules on the cervical pads and high pull headgear help to prevent accidental dislodging of the face bow. When a pulling force exceeds (approx. 2.5 - 3 kg / 5.5 - 6.6 lbs.) the traction modules separate automatically disengaging the face bow, preventing any whip-back (e.g. of the face bow). Reassembly is easy for either patient or parent. The traction module released by the clip is simply pushed back into position. Headgear should always be used with safety modules.
Items supplied: High-pull headgear in blue denim material with safety modules.
Spring force: light to 4.5 N (450 g)
Module: white Neck pad: blue denim
745-020-00 1 piece
Spring force: medium to 6 N (600 g)
Module: dark blue High-pull headgear: blue denim
745-021-00 1 piece
Spring force: strong to 7.5 N (750 g)
Module: light blue High-pull headgear: blue denim
745-022-00 1 piece
Neck Pad without Safety ModulesHeadgear and neck pads must always be used with safety modules.
Neck pad: blue denim
745-023-00 5 pieces
262
Neck Pad without Safety ModulesHeadgear and neck pads must always be used with safety modules.
Neck pad: blue cotton
745-033-00 5 pieces
Intra- and Extraoral
Extraoral Appliances
Neck pad: pink cotton 745-034-00 5 pieces
Neck Pad without Safety Modules (padded)Headgear and neck pads must always be used with safety modules.
Neck pad: blue/red
745-038-00 5 pieces
Neck pad: red/blue 745-039-00 5 pieces
Neck pad: blue/yellow 745-041-00 5 pieces
Safety Modules with Metal ClipFor neck pads or high-pull headgear. Headgear and neck pads must always be used with safety modules.
Spring force: light to 4.5 N (450 g)
Module: white
745-028-00 10 pieces
Spring force: medium to 6 N (600 g)
Module: dark blue 745-029-00 10 pieces
Spring force: strong to 7.5 N (750 g)
Module: light blue 745-030-00 10 pieces
Metal Clip for Safety ModulesMaterial: stainless steel 745-037-00 10 pieces
263
High-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With elastic, porous and air per-meable chin cap.Color: blue
744-705-00 1 piece
Intra- and Extraoral
Extraoral Appliances
High-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With rigid chin cap and short outer hooks, air permeable.Color: blue
744-709-00 1 piece
Vertical-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With elastic, porous and air permeable chin cap.Color: blue
744-706-00 1 piece
Vertical-Pull Headgear with Chin CapOne type which is suitable for all head and chin sizes. With rigid chin cap and short outer hooks, air permeable.Color: blue
744-710-00 1 piece
High-Pull Headgear for Face BowWith eyelets for hooking extraoral plastic chains.
We recommend: Dentalastics® extraoral plastic chains, REF 744-300-00.
Available: High-pull headgear without modules and face bow.
Color: blue denim
744-711-50 1 piece
High-Pull Headgear to beused with J-HooksWith protective plastic tubes for mounting elastics. One type is suitable for all head sizes. J-Hook REF 742-501-00 for headgear see accessories.Color: blue
744-202-00 1 piece
264
Reverse-Pull Headgear “Tuebinger“ ModelMesial movement of lateral teeth in upper and lower arch. Movement of individual teeth along the arch. Movement of groups of teeth in the arch, Protraction of anterior segments (intermaxillary area). Forehead pad with band and chin cap, see accessories.
745-300-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Face Mask “Delaire“ ModelMesial movement of lateral teeth in upper and lower arch. Movement of individual teeth along the arch. Movement of groups of teeth in the arch, Protraction of anterior segments (intermaxillary area). Forehead pad with band and chin cap, see accessories.
745-400-00 1 piece
Headgear “Hickham“ Universal PullOffers individual adjustment of force direction. The required force is produced by extraoral elastics. All headgears fitted with cheek pads but are without hooks. J-Hooks REF 744-713-00 for Hickham Headgear see accessories.Color: blue
744-712-00 1 piece
Headgear “Hickham“ High PullOffers individual adjustment of force direction. The required force is produced by extraoral elastics. All headgears fitted with cheek pads but are without hooks.J-Hooks REF 744-713-00 for Hickham Headgear see accessories.Color: blue
744-717-00 1 piece
Noninium® Face Bow, MediumNickel free (Nickel trace elements of 0 ≤ 0,2% are due to the process of manufacturing.) Break resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white
740-000-00 1 piece
265
Standard Face Bow, MiniBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white
740-019-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Standard Face Bow, MediumBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.00 mm / 40
Safety caps: white
740-010-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white
740-020-00 1 piece
Outer bow, with cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white
740-120-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white Face bow: plastic coated
740-220-00 1 piece
Standard Face Bow, MaxiBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white
740-021-00 1 piece
266
Standard Face Bow, MaxiBreak resistant laser welded connection between outer and inner bow. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45
Safety caps: white Face bow: plastic coated
740-221-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Face Bow with Stop Loops, MediumBreak resistant laser welded connection between outer and inner bow. Outer bow in medium length only. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 83 mm
Safety caps: yellow
741-040-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 90 mm
Safety caps: grey
741-045-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 97 mm
Safety caps: red
741-050-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 104 mm
Safety caps: green
741-055-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 111 mm
Safety caps: blue
741-060-00 1 piece
267
Face Bow with Stop Loops, MediumBreak resistant laser welded connection between outer and inner bow. Outer bow in medium length only. Safety Note: Face bows must always be worn with safety headgear and safety modules.
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 97 mm
Safety caps: red
741-150-00 1 piece
Intra- and Extraoral
Extraoral Appliances
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 83 mm
Safety caps: yellow Face bow: plastic coated
741-240-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 90 mm
Safety caps: grey Face bow: plastic coated
741-245-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 97 mm
Safety caps: red Face bow: plastic coated
741-250-00 1 piece
Outer bow, without cuspid hooks.
Inner bow: ø 1.15 mm / 45 Stop loops: 104 mm
Safety caps: green Face bow: plastic coated
741-255-00 1 piece
268
Intra- and Extraoral
Elastic Auxiliaries
Intraoral Latex ElasticsHighest elasticity and fatigue resistance. The elastic packs are marked according to size and strength with symbols. Therefore, every type can be quickly identified.
Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter zur Wirkung.
Color: natural
Strength Inner diameter REF Quantity light 0.7 N (71 g) 3.2 mm / 1/8 inch 772-103-00 10 x 100 pieces light 0.7 N (71 g) 4.8 mm / 3/16 inch 772-104-00 10 x 100 pieces light 0.7 N (71 g) 6.4 mm / 1/4 inch 772-106-00 10 x 100 pieces light 0.7 N (71 g) 8.0 mm / 5/16 inch 772-107-00 10 x 100 pieces light 0.7 N (71 g) 9.5 mm / 3/8 inch 772-109-00 10 x 100 pieces medium 1.3 N (128 g) 3.2 mm / 1/8 inch 772-113-00 10 x 100 pieces medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-114-00 10 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-116-00 10 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-117-00 10 x 100 pieces medium 1.3 N (128 g) 9.5 mm / 3/8 inch 772-119-00 10 x 100 pieces strong 1.8 N (184 g) 3.2 mm / 1/8 inch 772-123-00 10 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-124-00 10 x 100 pieces strong 1.8 N (184 g) 6.4 mm / 1/4 inch 772-125-00 10 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-126-00 10 x 100 pieces strong 1.8 N (184 g) 9.5 mm / 3/8 inch 772-127-00 10 x 100 pieces
Elastic PlacersFor seating and removing intraoral rubber rings.Assorted colors in purple, magenta, yellow, green
772-400-00 50 pieces
DISCO Intraoral Colored Latex ElasticsHighest elasticity and fatigue resistance.
Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter.
Assorted colors in purple, red, green
Strength Inner diameter REF Quantity medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-514-00 25 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-516-00 25 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-517-00 25 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-524-00 25 x 100 pieces strong 1.8 N (184 g) 6,4 mm / 1/4 inch 772-526-00 25 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-527-00 25 x 100 pieces
269
Intra- and Extraoral
Elastic Auxiliaries
Intraoral Non-Latex ElasticsHighest elasticity and fatigue resistance. The elastic packs are marked according to size and strength with symbols. Therefore, every type can be quickly identified.
Strength: Strength ratings are based on the elastic being stretched 3 times the listed inner diameter.
Color: transparent
Strength Inner diameter REF Quantity light 0.7 N (71 g) 3.2 mm / 1/8 inch 772-303-00 10 x 100 pieces light 0.7 N (71 g) 4.8 mm / 3/16 inch 772-304-00 10 x 100 pieces light 0.7 N (71 g) 6.4 mm / 1/4 inch 772-306-00 10 x 100 pieces light 0.7 N (71 g) 8.0 mm / 5/16 inch 772-307-00 10 x 100 pieces light 0.7 N (71 g) 9.5 mm / 3/8 inch 772-309-00 10 x 100 pieces medium 1.3 N (128 g) 3.2 mm / 1/8 inch 772-313-00 10 x 100 pieces medium 1.3 N (128 g) 4.8 mm / 3/16 inch 772-314-00 10 x 100 pieces medium 1.3 N (128 g) 6.4 mm / 1/4 inch 772-316-00 10 x 100 pieces medium 1.3 N (128 g) 8.0 mm / 5/16 inch 772-317-00 10 x 100 pieces medium 1.3 N (128 g) 9.5 mm / 3/8 inch 772-319-00 10 x 100 pieces strong 1.8 N (184 g) 3.2 mm / 1/8 inch 772-323-00 10 x 100 pieces strong 1.8 N (184 g) 4.8 mm / 3/16 inch 772-324-00 10 x 100 pieces strong 1.8 N (184 g) 6.4 mm / 1/4 inch 772-325-00 10 x 100 pieces strong 1.8 N (184 g) 8.0 mm / 5/16 inch 772-326-00 10 x 100 pieces strong 1.8 N (184 g) 9.5 mm / 3/8 inch 772-327-00 10 x 100 pieces
Container for Intraoral Elastics
For patient packs of latex elastics. With wall bracket.Dimensions: Length: 508 mm / 20 inch Height: 169 mm / 6 1/2 inch Depth: 107 mm / 4 inch
772-000-00 1 piece
Intraoral Latex ElasticsSpecial sizes. Cuspid to cuspid, for use with face bows with cuspid hooks. Highest elasticity and fatigue resistance. The indicated pull comes into force when the elastic is stretched to three times its diameter.
Strength Inner diameter REF Quantity medium 1.3 N (128 g) 16 mm / 5/8 inch 772-100-00 1,000 pieces medium 1.3 N (128 g) 19 mm / 3/4 inch 772-200-00 1,000 pieces
Extraoral Latex ElasticsHigh elasticity and fatique resistance. The indicated pull comes into force when the elastic is stretched to three times its diameter.
Strength Inner diameter REF Quantity light 2.3 N (227 g) 6.4 mm / 1/4 inch 772-203-00 1,000 pieces light 2.3 N (227 g) 8.0 mm / 5/16 inch 772-204-00 1,000 pieces light 2.3 N (227 g) 9.5 mm / 3/8 inch 772-205-00 1,000 pieces light 2.3 N (227 g) 12.7 mm / 1/2 inch 772-206-00 1,000 pieces strong 4.5 N (455 g) 8.0 mm / 5/16 inch 772-208-00 1,000 pieces strong 4.5 N (455 g) 12.7 mm / 1/2 inch 772-210-00 1,000 pieces
270
Elastic Ligature SilkSpun elastic thread. Medium strength.
775-210-00 40 m
Intra- and Extraoral
Elastic Auxiliaries
Dentalastics® Rotation WedgesFor individual tooth rotation.Color: grey
774-003-00 100 pieces
Color: transparent 774-000-00 100 pieces
Dentalastics® Plastic LigaturesFor ligating arch wires.
For single and double-winged brackets.
Inner diameter: ø 1.3 mm
Color: transparent
774-002-01 1,000 pieces
Dentalastics® Plastic Ligature Chain Elastics, with Short ConnectorInner diameter ø 1.3 mm Length: 6.6 mm
Color: transparent
774-102-01 100 pieces
Inner diameter ø 1.3 mm Length: 7.4 mm
Color: transparent
774-112-00 100 pieces
Inner diameter ø 1.3 mm Length: 9.2 mm
Color: transparent
774-122-00 100 pieces
271
Dentalastics® SeparatorsFor quick and easy separation of teeth. Radiopaque. For anteriors.
Inner diameter ø 1.5 mm
Color: green
774-100-01 1,000 pieces
Intra- and Extraoral
Elastic Auxiliaries
For posteriors.
Inner diameter ø 2.1 mm
Color: blue
774-200-01 1,000 pieces
"Elasto-Force" Plastic Chains, with Short ConnectorRoll 3,5 m
Color Inner diameter REF Quantity Transparent 1.3 mm 774-220-00 1 roll Green 1.3 mm 774-230-00 1 roll Pink 1.3 mm 774-231-00 1 roll Blue 1.3 mm 774-232-00 1 roll Red 1.3 mm 774-233-00 1 roll Yellow 1.3 mm 774-234-00 1 roll Metallic silver 1.3 mm 774-235-00 1 roll
Super "Elasto-Force" Plastic Chains, with Short ConnectorConstant tension with longer effectiveness. High elasticity with very good resiliency. Roll 3,5 m
Color Inner diameter REF Quantity Transparent 1,3 mm 774-217-00 1 roll
"Elasto-Force" Plastic Chains, without Short ConnectorRoll 3,5 m
Color Inner diameter REF Quantity Transparent 1.3 mm 774-221-00 1 roll Blue 1.3 mm 774-226-00 1 roll Yellow 1.3 mm 774-228-00 1 roll Metallic silver 1.3 mm 774-229-00 1 roll
Super "Elasto-Force" Plastic Chains, without Short ConnectorConstant tension with longer effectiveness. High elasticity with very good resiliency. Roll 3,5 m
Color Inner diameter REF Quantity Transparent 1.3 mm 774-216-00 1 roll
272
"Elasto-Force" Plastic Ligature Thread, hollowFor rotation, cuspid movement, figure eight ligating, etc. Easy to tie, because the thread is hollow.Outer diameter: ø 0.65 mm / 25 Length: 15 m
Color: transparent
774-205-00 1 piece
Intra- and Extraoral
Elastic Auxiliaries
Dentalastics® "Personal" AssortmentColored Plastic Ligatures Especially delicate plastic ligatures for ligating archwires to brackets. For single and double-winged brackets.
Packet content per color: 44 sticks x 22 rings = 968 pieces.
Ring inner diameter: ø 1.3 mm
Assortment: all colors
774-561-01 1 Assortment
Dentalastics® "Personal"Colored Plastic Ligatures Especially delicate plastic ligatures for ligating archwires to brackets. For single and double-winged brackets.
Packet content: 45 sticks x 22 rings = 990 pieces.
Color Inner diameter REF Quantity Silver 1.3 mm 774-549-00 1 packet Transparent 1.3 mm 774-551-00 1 packet Black 1.3 mm 774-552-00 1 packet White 1.3 mm 774-553-00 1 packet Pink 1.3 mm 774-554-00 1 packet Blue 1.3 mm 774-555-00 1 packet Red 1.3 mm 774-556-00 1 packet Purple 1.3 mm 774-557-00 1 packet Yellow 1.3 mm 774-558-00 1 packet Green 1.3 mm 774-559-00 1 packet Orange 1.3 mm 774-560-00 1 packet
273
Oral Screen “Ulmer Model“Range of Application: Incorrect functions of the tongue (pressing of the tongue, incorrect position of the tongue), biting the lips and sucking the lips, weak muscle structure of the lips, as well as thumb sucking.Advantages: · No pressure points due to the flexible
material· More comfortable to wear· Better acceptance by the patient· Easy to monitor the performance of the
myofunctional exercisesProtective box - see accessories (expansion screws)!Mini / Size 1 = for preschool age patients
074-000-00 1 piece
Intra- and Extraoral
Oral Screens
Maxi / Size 2 = for patients from school age to adults
074-001-00 1 piece
Face Former individualized(Berndsen/Berndsen) Material: Silopren
Color: transparent blue
074-100-00 1 piece
Face Former anatomical(Berndsen/Berndsen) Material: Silopren
Color: transparent blue
074-101-00 1 piece
274
OrthoSafe Sports Guard, AssortmentThe safe and comfortable guard for all types of sports. Protects the upper and lower arches. Consists of: · 5 x guards, colors (each - 1 x transparent,
pink, blue, green, yellow)· 5 x plastic boxes· 5 x grips
074-200-00 1 Assortment
Intra- and Extraoral
OrthoSafe Sports Guard
OrthoSafe Sports GuardThe safe and comfortable guard for all types of sports. Protects the upper and lower arches. Consists of: · 1 x guard· 1 x plastic box· 1 x gripColor: transparent
074-201-00 1 piece
Color: pink 074-202-00 1 piece
Color: blue 074-203-00 1 piece
Farbe: green 074-204-00 1 piece
Farbe: yellow 074-205-00 1 piece
275
SUS2 Starter SetContents: · 2 x telescope elements (with inbusscrew)
REF 607-147-00· 2 x telescope rods, assembled
REF 607-148-00· 2 x ball retainer clasps, ø 1.00 mm
REF 607-136-00· 2 x distance springs, length 10 mm
REF 607-142-00· 2 x compression springs (stainless steel),
length 15 mm REF 607-141-00· 1 x activation key (Inbus)
REF 607-144-00· 1 x Instructions for use
607-140-00 1 Set
Intra- and Extraoral
SUS2 - Sabbagh Universal Spring
SUS2 SetContents: · 2 x telescope elements (with inbusscrew)
REF 607-147-00· 2 x telescope rods, assembled
REF 607-148-00· 2 x ball retainer clasps, ø 1.00 mm
REF 607-136-00· 2 x distance springs, length 10 mm
REF 607-142-00· 2 x compression springs (stainless steel),
length 15 mm REF 607-141-00· 1 x Instructions for use
607-145-00 1 Set
SUS2 Telescope rods, assembledconsisting of: · Telescope rod· Arch adapter· Fixing screw
607-148-00 2 pieces
SUS2 Telescope rods
607-149-00 2 pieces
SUS2 Arch adapter/Fixing screw
607-143-00 1 pair
SUS2 telescope elements (with inbusscrew)
607-147-00 1 piece
SUS2 compression springs (stainless steel)Length: 15 mm 607-141-00 6 pieces
276
SUS2 Compression springs (Nickel titanium)Length: 15 mm 607-150-00 6 pieces
Intra- and Extraoral
SUS2 - Sabbagh Universal Spring
SUS2 Distance springsLänge: 10 mm 607-142-00 6 pieces
SUS2 Ball retainer claspsShaft: ø 1.00 mm Ball: ø 2.10 mm Length: 18 mm
607-136-00 10 pieces
SUS2 Activation key
607-144-00 1 piece
277
Herbst® IV Bite Jumping Hinges, completeFor soldering to bands. Ball and socket hinge for great lateral movement, with a „C“ clip to hold the rods in place. No screws required. Greater patient comfort.Contents: 1 pair of Herbst® IV Bite Jumping Hinges with 4 bases / tops and 10 „C“ clips.
607-115-00 1 Set
Intra- and Extraoral
Herbst® Bite Jumping Hinges
“C“ ClipsFor Herbst® IV Bite Jumping Hinges. 607-116-00 10 pieces
BaseFor Herbst® IV Bite Jumping Hinges. 607-118-00 10 pieces
Telescopic Tube with Ball JointFor Herbst® IV Bite Jumping Hinges. 607-125-00 1 piece
Herbst® I Bite Jumping Hinges with Screws, completeFor soldering to bands.Contents: 1 pair of Herbst® I Bite Jumping Hinges with 4 pivots and screws / base.
607-100-00 1 Set
Pivots and ScrewsFor Herbst® I Bite Jumping Hinges. Contents: 10 screws 10 pivots
607-101-00 10 pairs
ScrewsFor Herbst® I Bite Jumping Hinges. 607-102-00 10 pieces
278
Herbst® I Bite Jumping Hinges, with Hexagon Socket Screws, completeFor soldering to bands.Contents: 1 pair of Herbst® I Bite Jumping Hinges with 4 pivots and hexagon socket screws / base, key for hexagon socket screw.
607-120-00 1 Set
Intra- and Extraoral
Herbst® Bite Jumping Hinges
Pivots and ScrewsFor Herbst® I Bite Jumping Hinges. Contents: 10 hexagon socket screws 10 pivots
607-121-30 10 pairs
Hexagon ScrewsFor Herbst® I Bite Jumping Hinges. 607-122-30 10 pieces
Key for Hexagon Socket ScrewsFor Herbst® I Bite Jumping Hinges. Size: 1.5
607-123-10 1 piece
BaseFor Herbst® I Bite Jumping Hinges. 607-117-00 10 pieces
Herbst® II Bite Jumping Hinges, completeTo fix onto arch wires with the multi band technique.Contents: 1 pair of Herbst® II Bite Jumping Hinges with 2 short screws, 2 long screws and pivots.
607-108-00 1 Set
Screws, shortFor Herbst® II Bite Jumping Hinges. 607-109-00 10 pieces
Screws, longFor Herbst® II Bite Jumping Hinges. 607-110-00 10 pieces
279
Arch Wire PivotsFor Herbst® II Bite Jumping Hinges. 607-111-00 10 pieces
Intra- and Extraoral
Herbst® Bite Jumping Hinges
Telescopic TubeFor Herbst® I + II Bite Jumping Hinges, right. 607-121-00 1 piece
Telescopic TubeFor Herbst® I + II Bite Jumping Hinges, left. 607-122-00 1 piece
Telescopic RodsFor Herbst® I + II Bite Jumping Hinges. 607-124-00 1 piece
Screw DriverFor Herbst® I + II Bite Jumping Hinges with screws.
607-106-00 1 piece
Spacer RingsFor Herbst® I through IV Bite Jumping Hinges.Length: 1 mm
607-103-00 10 pieces
Length: 2 mm 607-104-00 10 pieces
Length: 3 mm 607-105-00 10 pieces
Length: 4 mm 607-107-00 10 pieces
Length: 5 mm 607-112-00 10 pieces
280
Intra- and Extraoral
Herbst® TS Bite Jumping Hinges, with Hexagon Socket Screws, complete
Herbst® TS Bite Jumping Hinges, with Hexagon Socket Screws, complete
Herbst® TS Bite Jumping Hinges, with Hexagon Socket Screws, complete
Length: 18 mmContents:1 telescopic rod for right and left / 4 F-bases /4 hexagon socket screws / 1 key for hexa-gon socket screws / 1 instructions for use
Length: 20 mmContents:1 telescopic rod for right and left / 4 F-bases /4 hexagon socket screws / 1 key for hexa-gon socket screws / 1 instructions for use
Length: 22 mmContents:1 telescopic rod for right and left / 4 F-bases /4 hexagon socket screws / 1 key for hexa-gon socket screws / 1 instructions for use
Herbst® TS – Bite Jumping Hinges with Telescopic System
F-Base
Clamping Pliers Herbst® TS
For Herbst® TS + I Bite Jumping Hinges.
sterilizableTo clamp the crimpable spacer rings onto the telescopic rod.Premium Line – 10 year guarantee
607-126-18 1 set
607-126-20 1 set
607-126-22 1 set
607-127-30 10 pieces
003-710-00 1 piece
607-103-11 10 pieces
607-104-11 10 pieces
607-105-11 10 pieces
607-106-11 10 pieces
Herbst® TS Spacer Rings, crimpableFor Herbst® TS Bite Jumping Hinges.Length: 1 mm
Length: 2 mm
Length: 3 mm
Length: 4 mm
281
Intra- and Extraoral
Chin CapElastic, porous, air permeable.Color: blue
744-614-00 1 piece
Accessories
Chin CapRigid, padded, with short hook, air permeable.Color: blue
744-613-00 1 piece
Chin CapRigid, padded, with long hook, air permeable.Color: blue
744-615-00 1 piece
Chin CapFor Reverse-Pull Headgear, Tuebinger Model, air permeable.Color: blue
745-304-00 1 piece
Chin Cap LinerTo make the chin cap more comfortable and prevent skin irritation.
744-616-00 10 pieces
Chin Cap Liner, DelaireForehead / Chin cap pad for face mask Delaire REF 745-400-00. Self adhesive.
745-401-00 1 piece
Headband, elastic, adjustableFor Reverse-Pull Headgear, Tuebinger Model 745-302-00 5 pieces
Forehead Pad with BandFor Reverse-Pull Headgear, Tuebinger Model 745-301-00 5 pieces
Foam Pad for HeadgearFor individually sized pads.Length: 2.70 m / 8.5 ft
Color: blue
744-100-00 1 piece
282
Intra- and Extraoral
Neck Pads for Neck BandsAssortment of 10 piecesLength: 180 mm / 7 1/8“
Contents: 4 x red 3 x turquoise 3 x yellow
744-112-00 1 Assortment
Accessories
Neck Pads for Neck BandsLength: 180 mm / 7 1/8“
Color: violet 744-101-00 10 pieces
Head Band MaterialFor individually fitted head bands.Width: 20 mm / 3/4“ Length: 22.50 m / 24.5 yds
Color: blue
744-601-00 1 piece
J-HooksWith loops for direct force application to headgear. For headgear REF 744-202-00.
742-501-00 1 pair
J-Hooks for Hickham HeadgearFor universal pull headgear REF 744-712-00 and for high-pull headgear REF 744-717-00. Complete with sliding tubes and elastics. For cuspid / bicuspid retraction.
744-713-00 2 pieces
Dentalastics® Extraoral Plastic ChainExample: Headgear with hooks.Length: 118 mm / 4 5/8“
Color: transparent
774-300-00 10 pieces
Lip BumpersWith plastic shield and hook for intermaxillary elastics.For tubes ø 0.90 mm / 36
748-009-00 1 piece
283
Lip BumpersWith plastic shield and hook for intermaxillary elastics.For tubes ø 1.15 mm / 45
748-114-00 1 piece
Accessories
Stop TubesFor face bows and lip bumpers.Inner diameter ø 1.15 mm / 45
480-914-00 100 pieces
Activator TubesThese tubes can be built directly into an activator to hold a face bow. Example: Teuscher activator.Inner diameter ø 1.15 mm / 45
607-300-00 10 pieces
Inner diameter ø 1.30 mm / 51 607-301-00 10 pieces
Stop ScrewsLadanyi For face bows and lip bumpers.Inner diameter ø 1,15 mm / 45
480-918-02 10 pieces
Key for Hexagon Socket ScrewsFor hexagonal stop screws (Ladanyi).Size: 0.9
480-924-02 1 piece
StaplerHeavy duty stapler for assembling headgear. 744-501-00 1 piece
StaplesFor stapler REF 744-501-00. 744-352-00 5.000 pieces
284
Supplies
Impression Material ......................................................................................................................... Page 288
Laboratory Accessories .................................................................................................................... Page 291
Miscellaneous ................................................................................................................................... Page 292
tomas® – Anchorage System
magic® – Lingual System
Brackets
Buccal Tubes
Bands
Adhesives
Wires · Arches · Accessories
Intra- and Extraoral
Supplies
Expansion Screws
Orthodontic Acrylics
Pliers · Instruments
Equipment
Dynamics of Orthodontics, o-atlas
Courses
Service
SuppliesReliable and a good value
285
Supplies
286
Supplies
The universal orthodontic impression material
Orthalgenat® Duo
Very creamy consistency Outstanding definition –
optimal stability Orthalgenat® Duo has a very high proportion of fine micro
particles. This gives it a very creamy and homogenous con-sistency and enables it to reproduce outstanding definition with an even and smooth surface and optimal stability. This stability prevents the impression material from flowing over the edge of the impression tray.
High tear resistance Utilization also for patients
with brackets Orthalgenat® Duo is a quick setting impression material and
is especially resistant to tearing. Precision in all situations. Orthalgenat® Duo produces excellent results with deep undercuts and multi banded patients.
287
Supplies
Good restoration after distortion Precise impressions Orthalgenat® Duo has excellent elasticity after setting due to its cross linked structure. This is an important factor when taking
accurate impressions on multi banded patients. Once set, a 97.5% restoration value is realized (DIN/EN/ISO 21563).
Pleasant taste Highly accepted by patients Orthalgenat® Duo is available in 2 different flavors which are especially popular amongst children: Mint and vanilla.
Virtually dust free Easy and clean mixing Orthalgenat® Duo is virtually dust free and guarantees easy and clean mixing. It is suitable for both manual mixing and
automatic mixing machines.
Compatible with all conventional dental plasters and disinfectants Easy and universal use Orthalgenat® Duo is compatible with all conventional dental plasters and disinfectants. The impressions can be repeatedly
cast with plaster without compromising precision.
Optional – the separate color indicator The new Orthalgenat® Duo separate color indicator is unique and can be added individually as desired. The color
changes on the indicator depend on the original color of the impression material. It clearly shows the setting stages of the mixed Orthalgenat® Duo.
Original color:Directly after mixing, initial stages
of impression taking
Color change only in conjunction
with color indicator
Intermediate color:By the time the second change
in color is complete
Final color:End of impression taking period
As soon as this change in color is complete, Orthalgenat® Duo can be put into the mouth to take the impression, at the latest when the impression material starts to turn blue / orange (respectively).
When the change in colors is in its last phase, the Orthalgenat® Duo impression can be removed.
purple
blue
green
pink
orange
yellow
288
Orthalgenat® DuoImpression material.Flavor: Vanilla
Color: yellow
Available:1 kg in box9 and 20 x 1 kg in bag
150-501-10 1 kg
150-509-10 9 x 1 kg
150-520-10 20 x 1 kg
Supplies
Impression Material
Flavor: Mint
Color: green
Available:1 kg in box9 and 20 x 1 kg in bag
150-501-20 1 kg
150-509-20 9 x 1 kg
150-520-20 20 x 1 kg
Orthalgenat® Duo Color Indicator
150-510-00 20 ml
Dosing BottleFor liquids.Volume: 500 ml
150-000-00 1 piece
Orthalgenat®-ExImpression tray cleaner.For removing alginate and plaster residue. Concentrate for manual or ultrasonic cleaning.
150-010-00 1.5 kg
289
O-Tray Impression TraysDisposable, can be disinfected, do not sterilize. Specially developed for orthodontics. The deep vertical walls guarantee precise definition of the soft tissue and economize on impression material. Retention buttons REF 150-400-00 may be placed in the perforations to obtain additional retention.
Upper - Size: U1
Color: yellow
150-201-00 20 pieces
Supplies
Impression Material
Upper - Size: U2
Color: red 150-202-00 20 pieces
Upper - Size: U3
Color: blue 150-203-00 20 pieces
Upper - Size: U4
Color: green 150-204-00 20 pieces
Lower - Size: L1
Color: yellow 150-221-00 20 pieces
Lower - Size: L2
Color: red 150-222-00 20 pieces
Lower - Size: L3
Color: blue 150-223-00 20 pieces
Lower - Size: L4
Color: green 150-224-00 20 pieces
290
Retention ButtonsFor O-Tray Impression Trays.· Retention buttons may be placed in the
perforations to obtain additional retention· They feature rounded edges for greater
patient comfort and better retention of the impression material
150-400-00 100 pieces
Supplies
Impression Material
Flexaponal®-Special Wax (Uhlig)For bite registration, adhesive borders and impression trays. Accurately records the occlusion. Soft, flexible and adhesive, 1.0 mm thick.Strips: 200 x 10 mm
Color: red
124-002-00 50 pieces
Strips: 120 x 15 mm
Color: red 124-003-00 50 pieces
Strips: 200 x 10 mm
Color: white 124-202-00 50 pieces
291
Rapidur®
Extra hard, rapid setting, super white plaster of class IV for orthodontic models. According to DIN EN ISO 6873. Setting expansion: max. 0.15 % Compressive strength after 1 hour: min. 35 N/mm2 Processing time: min. 3 min Solidification time: max. 30 min
164-450-00 6 kg
Supplies
Laboratory Accessories
Mixing BowlFor plaster and impression material. Flexible, scratch resistant and easy to clean.
For 600 ml.
164-650-00 1 piece
For 400 ml. 164-651-00 1 piece
Model GlossEnvironmentally friendly impregnating liquid for (Rapidur®) plaster demonstration models to provide gloss and dust resistance.
166-450-00 4,5 kg
Orthodontic Base Unit (Hinz)For fixing three dimensionally oriented models. The uniform height, 6 cm, of the orthodontic models is determined by the base unit, which is easy to use.
050-500-00 1 piece
Plastic Model BasesMade of impact resistant white plastic, with hinge. Eliminates time consuming plaster model preparation.
Suited for Orthodontic Base Unit (Hinz).
Made of white plastic.
050-501-00 100 Paar
Bars/Ball JointsFor Plastic Model Bases REF 050-501-00. Suited for Orthodontic Base Unit (Hinz).
Made of white plastic.
050-503-00 50 pieces
292
Orthodontic Model TraysEach tray will hold five sets of models. They are stackable.Dimensions: 94 x 330 x 83 mm (W x D x H)
Made of white plastic.
050-502-00 10 pieces
Supplies
Laboratory Accessories
Ortho BrushA specialty orthodontic tooth brush, ideal for cleaning interproximal areas, fixed brackets and band appliances.
163-300-00 10 pieces
Miscellaneous
293
Notes
294
Expansion Screws
Standard Expansion Screws ............................................................................................................ Page 298
Special Screws .................................................................................................................................. Page 300
Accessories ....................................................................................................................................... Page 311
tomas® – Anchorage System
magic® – Lingual System
Brackets
Buccal Tubes
Bands
Adhesives
Wires · Arches · Accessories
Intra- and Extraoral
Supplies
Expansion Screws
Orthodontic Acrylics
Pliers · Instruments
Equipment
Dynamics of Orthodontics, o-atlas
Courses
Service
A Wide Selection of ProductsPerfect to the last detail
295
Expansion Screws
296
Expansion Screws
A wide selection of products For virtually all treatment plans Dentaurum’s selection of stainless steel expansion
screws ranges from standard expansion screws to more complex special expansion screws such as Bertoni's three dimensional screws. remati-tan® expansion screws, the biocompatible alter-natives in pure titanium for sensitive patients, round off this wide selection.
Perfect to the last detail Reliable and effective
treatment results Dentaurum’s expansion screws achieve wide
expansion despite their small size. The built-in stops prevent the screws from coming apart. Precision thread friction and the built-in screw lock mechanism enables precise opening of the screw without unwanted “turning back”. Strong and stable screw construction due to high precision and excellent quality.
Perfect in form, function and finish
Expansion Screws
297
Expansion Screws
A selection of expansion screws
Titanium Hyrax® Maxi - 12 The world’s first expansion screw in pure titanium Apart from the Titanium Hyrax® 14/12 expansion screw’s perfect design it also has unbeatable biocompatibili-
ty. This is due to the fact that it is made of pure titanium which can be used for treatments with especially sensitive patients. The functional highlights of this innovative product are:
The built-in screw lock to prevent unwanted "turning back"
The built-in screw stop to prevent the screw from coming apart once maximum expansion has been obtained
Excellent thread strength which creates high stability
Variety SP The versatile, multi functional expansion screw The Variety expansion screw’s compact design is extremely comfortable for the patient to wear despite its wide
expansion of 12 mm. Its functional highlights among others are:
The biocompatible laser welded legs, which are mechanically extremely strong
2 instead of 4 retention legs, which opens a whole new range of possibilities
2 instead of 4 retention legs makes the Variety expansion screw versatile and can be used in both upper and lower appliances. An example of this would be:
Distalization and mesialization of posterior teeth
Osseous distraction in the lower jaw
Uprighting, expand, rotate and torquing of molars
Early expansion of the maxilla
Forward Thrust Double Plate System (Schaneng) The elastic system The flexible forward thrust double plate system differs from conventional systems in the elasticity of the
intermaxillary guide elements. This creates a more gentle application of force on the temporomandibular joint. Forward thrust double plates also have the advantage that apart from shifting occlusion it is also possible to move individual teeth with the aid of springs.
Other advantages include:
Guide ridge is round and smooth, causing no risk of injury to the patient
Guide ridge is flexible and interconnected, therefore, less likely to brake
Location template ensures that the guide ridge slides properly on the lingual plate at an angle of 60°
298
Expansion Screws
600-300-10 1 piece
600-300-30 10 pieces
600-300-60 100 pieces
600-301-10 1 piece
600-301-30 10 pieces
600-301-60 100 pieces
600-302-10 1 piece
600-302-30 10 pieces
600-302-60 100 pieces
rematitan®-Expansion Screw, MediumMade of pure titanium. Skeleton design For transversal expansion and distalization in upper and lower arch. Pearl-blue plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm
600-400-10 1 piece
600-400-30 10 pieces
Standard Expansion Screws
Expansion Screw, MiniSkeleton design For transversal expansion and distalization in the lower arch or for especially narrow upper arches. White plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 6.5 mm 4 x 1/4 turn = 0.70 mm
Expansion Screw, MediumSkeleton design For transversal expansion and distalization in the upper and lower arch. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm
Expansion Screw, MaxiSkeleton design For transversal expansion in the upper arch. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm
299
Expansion Screws
600-303-10 1 piece
600-303-30 10 pieces
600-303-60 100 pieces
Expansion Screw, MagnumSkeleton design Extra strong, for transversal expansion in the upper arch and bimaxillary functional gnatho-orthopedic appliances. Neon yellow plastic directional arrows. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 11 mm 4 x 1/4 turn = 0.80 mm
Standard Expansion Screws
Trapezoidal Expansion ScrewSkeleton design For narrow maxillas and as activation screw for bimaxillary functional gnatho orthopedic appliances. Neon yellow plastic directional arrows.Maximum expansion: 7.5 mm 4 x 1/4 turn = 0.80 mm
600-310-30 10 pieces
300
Expansion Screws
600-502-10 1 piece
600-502-30 10 pieces
600-502-60 100 pieces
600-503-10 1 piece
600-503-30 10 pieces
600-503-60 100 pieces
600-500-10 1 piece
600-500-30 10 pieces
600-500-60 100 pieces
600-501-10 1 piece
600-501-30 10 pieces
600-501-60 100 pieces
600-602-30 10 pieces
Sectional Screw, MiniStraight guide pins For movement of individual teeth. Arrow indicating the opening direction.Maximum expansion: 4 mm 4 x 1/4 turn = 0.35 mm
Special Screws
Sectional Screw, MiniAngulated guide pins facing down For movement of individual teeth. Arrow indicating the opening direction.Maximum expansion: 4 mm 4 x 1/4 turn = 0.35 mm
Sectional Screw, MediumStraight guide pins Neon yellow plastic directional arrows. Holes in body of screw for better retention in acrylic. Built in stops prevent screws from coming apart.Maximum expansion: 6 mm 4 x 1/4 turn = 0.40 mm
Sectional Screw, MediumAngulated guide pins facing down Neon yellow plastic directional arrows. Guide pins angulated for better placement in acrylic. Holes in body of screws for better retention in acrylic. Built-in stops prevent screws from coming apart.Maximum expansion: 6 mm 4 x 1/4 turn = 0.40 mm
Retraction Screw, Extra MiniStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 3 mm 4 x 1/4 turn = 0.40 mm
301
Expansion Screws
Special Screws
600-601-30 10 pieces
600-600-30 10 pieces
602-606-10 1 piece
602-605-10 1 piece
602-604-10 1 piece
Retraction Screw, MiniStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 2.5 mm 4 x 1/4 turn = 0.40 mm
Retraction Screw, MediumStraight U-shaped guide pins. For space closing and movement of individual teeth. Arrow indicating the opening direction.Maximum retraction: 4.5 mm 4 x 1/4 turn = 0.40 mm
Three Dimensional Screw(Bertoni) Combination transversal and protrusion screw for Y-plates. Strengthened guides. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm
Three Dimensional Screw(Bertoni) Three independently controlled movements. Strengthened guides for Y-plates. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm
Three Dimensional Screw(Steiner) The separately adjustable central connector allows individual fitting to different palate shapes. Strengthened guides. Combination transversal and protrusion screw for Y-plates. Arrow indicating the opening direction.Maximum expansion: 4 mm per segment 4 x 1/4 turn = 0.35 mm
302
Expansion Screws
Special Screws
606-600-00 1 piece
606-600-30 10 pieces
606-701-00 1 piece
606-701-30 10 pieces
600-001-00 1 piece
600-001-30 10 pieces
Fan-type Expansion ScrewFor sectional expansion of maxillary ante-riors. Plate sections are opened fanwise. Arrow indicating the opening direction.Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm
Mandibular Bow Screw(Mueller) For lateral and sagital anterior expansion of the mandible. Arrow indicating the opening direction.Maximum expansion: 5 mm 4 x 1/4 turn = 0.80 mm
"Flexible" Forward Thrust Double Plate System(Schaneng)For the treatment of distal malocclusions. The flexible forward thrust double plate system is a new development and differs from conventional systems in the flexibility of the intermaxillary elements.Starter set consisting of:· 3 x Screws with guide ridge for forward
thrust double plate REF 600-001-00· 1 x Adapter, narrow REF 600-003-00· 1 x Adapter, wide REF 600-004-00· 1 x Locating template REF 600-005-00· 1 x Instructions
600-000-00 1 Assortment
"Flexible" Forward Thrust Double Plate System (Schaneng)Guide RidgeWith palatal expansion screw.Length of Guide Ridge: 14 mm
303
Expansion Screws
Special Screws
600-002-00 1 piece
600-002-30 10 pieces
600-003-00 10 pieces
600-004-00 10 pieces
600-005-00 1 piece
600-610-00 1 piece
600-610-30 10 pieces
603-000-00 1 piece
"Flexible" Forward Thrust Double Plate System (Schaneng)Guide RidgeWithout palatal expansion screw.Length of Guide Ridge: 14 mm
"Flexible" Forward Thrust Double Plate System(Schaneng) Guide Ridge Adapter
To produce the diagonal level in the lower jaw.Adapter, narrow
Width: 14 mmAdapter, wide
Width: 18 mm
Locating Template (Schaneng)Made of stainless steel The locating template supplied with the system ensures that the guide ridge slides properly on the lingual plate at a 60° angle.
Expansion Screw for Split ActivatorFor separate expansion of upper and lower arches. Arrow indicating the opening direction.Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm
Norwegian Plate Screw(Weise) Sturdy screw for Norwegian plates and activators. Arrow indicating the opening direction.Maximum expansion: 5 mm 4 x 1/4 turn = 0.90 mm
304
Expansion Screws
Special Screws
Variety SP (small palate) Expansion ScrewScrew with straight retention legs For the fixed appliance technique. Can be widely used in the upper and lower jaw, for distalisation, mesialisation of posterior teeth, or for osseous distraction in the lower jaw.Also for early palatal expansion. · Especially suitable for very narrow jaws· Makes it possible to bend the retention
legs very close to the screw body·· Small dimensions with maximum expansion· Solder free· Break resistant retention legs and stable
guidance throughout the entire expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.6 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-809-10 1 piece
602-809-30 10 pieces
Variety Expansion ScrewScrew with straight retention legs For the fixed appliance technique. Can be widely used in the upper and lower jaw, for distalisation, mesialisation of posterior teeth, or for osseous distraction in the lower jaw. Also for palatal expansion. · Small dimensions with maximum expansion· Solder free· Break resistant retention legs and stable
guidance throughout the entire expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.6 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-806-10 1 piece
602-806-30 10 pieces
305
Expansion Screws
Special Screws
Titanium Hyrax® Maxi - 12Special Expansion Screw with straight retention legs made of pure titanium New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. Can be laser welded with titanium framework or Titanium Direct Bond Pads REF 799-210-00.With Safety Key
Screw: 14.4 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-824-10 1 piece
602-824-30 10 pieces
Hyrax® Mini - 7Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.4 mm Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm
602-816-10 1 piece
602-816-30 10 pieces
Titanium Direct Bond PadsAnatomically contoured. The titanium bonding bases are laser structured for the direct bond technique, specifically for the direct bonding of RPE appliances in conjunction with the Titanium Hyrax® Titanium Maxi - 12.
799-210-00 10 pieces
306
Expansion Screws
Special Screws
Hyrax® Mini - 7Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.4 mm Maximum expansion: 7 mm 4 x 1/4 turn = 0.80 mm
602-817-10 1 piece
602-817-30 10 pieces
Hyrax® Mini - 12Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.4 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-820-10 1 piece
602-820-30 10 pieces
307
Expansion Screws
Special Screws
Hyrax® Mini - 12Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 9.4 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-821-10 1 piece
602-821-30 10 pieces
Hyrax® Medium - 10Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 12.4 mm Maximum expansion: 10 mm 4 x 1/4 turn = 0.80 mm
602-818-10 1 piece
602-818-30 10 pieces
308
Expansion Screws
Special Screws
Hyrax® Maxi - 12Special Expansion Screw with straight retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 14.4 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-822-10 1 piece
602-822-30 10 pieces
Hyrax® Maxi - 12Special Expansion Screw with bent retention legs New improved quality For mid-palatal suture separations by means of fixed appliances without the need for acrylic plates. · Built-in stops prevent the screws from
coming apart once maximum expansion has been obtained
· Small dimensions with maximum expansion· Solder free· Break resistant retention legs, stable
guidance throughout complete expansion· The integrated spindle friction prevents
unwanted turning back· Permanently laser marked arrow on the
body of the screw indicates the opening direction and maximum expansion
· Screw can be tied down once desired expansion has been reached
With Safety Key
Screw: 14.4 mm Maximum expansion: 12 mm 4 x 1/4 turn = 0.80 mm
602-823-10 1 piece
602-823-30 10 pieces
309
Expansion Screws
Special Screws
609-500-00 1 Assortment
609-004-00 10 pieces
609-006-00 10 pieces
609-008-00 10 pieces
Piston Spring Screws, AssortmentComplete assortment of piston spring screws and accessories. Piston spring screws for the movement of individual teeth. These screws exert a con-stant, elastic and easily controllable pressure on the tooth to be moved. The compact size allows them to be easily built into appliances. Treatment is started with the 4 mm screw, which is exchanged for the 6 mm screw and finally the 8 mm screw as the tooth in question is moved.Contents:· 10 x Piston spring screws, length 4 mm
REF 609-004-00· 10 x Piston spring screws, length 6 mm
REF 609-006-00· 10 x Piston spring screws, length 8 mm
REF 609-008-00· 10 x Positioning screws
REF 609-100-00· 10 x Serrated housing nuts
REF 609-200-30· 1 x Reamer REF 609-300-00· 1 x Screw driver REF 609-400-00· 1 x Instructions4 x 1/4 turn = 0.35 mm
Piston Spring ScrewsFor the movement of individual teeth. These screws exert a constant, elastic and easily controllable pressure on the tooth to be moved. Their compact size allows them to be easily built into appliances.4 x 1/4 turn = 0.35 mm Length: 4 mm
4 x 1/4 turn = 0.35 mm Length: 6 mm
4 x 1/4 turn = 0.35 mm Length: 8 mm
310
Expansion Screws
Accessories
Positioning ScrewFor piston spring screws. To position the piston spring screw into the acrylic.Length: 12 mm
609-100-00 10 pieces
Serrated Housing NutFor piston spring screws. To position into acrylic or to weld onto wire elements.Length: 3 mm
609-200-30 10 pieces
ReamerFor piston spring screws. 609-300-00 1 piece
Screw DriverFor piston spring screws. To activate the piston spring screw.
609-400-00 1 piece
311
Expansion Screws
Accessories
Arrows to Indicate the Opening DirectionFor Expansion Screws.Color: yellow
611-130-00 50 pieces
Color: white 611-131-00 50 pieces
Color: pearl-blue 611-132-00 50 pieces
Universal Bending KeyEasy bending of the retention legs of all Hyrax®, Variety and Titanium Hyrax® screws without the use of any additional pliers (leverage principle).
611-122-00 1 piece
Safety KeyCan be used with all Dentaurum Hyrax® and Variety screws. For safe activation of the expansion screws by the patient in Hyrax® and Variety fixed appliances.
611-120-01 10 pieces
Expansion Screw KeyStraight, small, standard Can be used with all Dentaurum expansion screws. Stainless steel-rustfree. To activate all expansion screws in removable appliances. Outside of the mouth.
611-115-00 1 piece
611-115-30 10 pieces
611-115-60 100 pieces
Expansion Screw KeyLarge, with elongated handle Can be used with all Dentaurum expansion screws. Stainless steel-rustfree. To activate all expansion screws in removable appliances. Outside of the mouth.
611-116-00 1 piece
Wedge RulerCan be sterilized For checking the opening of appliances.
043-720-00 1 piece
312
Expansion Screws
Accessories
Expansion Screw Sample KitFilled with 29 expansion screws that are cur-rently available, plus 3 expansion screw keys. 1 Set = 32 pieces
612-000-00 1 Set
Appliance Container, MiniThe mini version is especially suitable for single appliances and oral screens, such as the Ulmer Model. Made of durable plastic.Color: pearl-blue
163-602-01 10 pieces
Color: neon-pink 163-603-01 10 pieces
Color: neon-yellow 163-604-01 10 pieces
Color: neon-orange 163-605-01 10 pieces
Color: neon-green 163-606-01 10 pieces
313
Expansion Screws
Accessories
Appliance Container, MaxiThe maxi version is especially suitable for bimaxillary appliances, such as activator, bionator. Made of durable plastic.Color: pearl-blue
163-702-01 10 pieces
Color: neon-pink 163-703-01 10 pieces
Color: neon-yellow 163-704-01 10 pieces
Color: neon-orange 163-705-01 10 pieces
Color: neon-green 163-706-01 10 pieces
Color: black 163-707-01 10 pieces
Color: white-flecked 163-708-01 10 pieces
314
Appliance Container, MagnumThe magnum version is especially suitable for extremely large Fraenkel appliances, orthodontic appliances for adult treatment, or dentures. Made of durable plastic.Color: pearl-blue
163-802-01 10 pieces
Expansion Screws
Accessories
Lanyard with Safety ClipsFor appliance containers.Colors: blue, neon rose, neon yellow, neon orange, neon green, printed with ”Dentaurum“, mixed
163-807-00 25 pieces
Appliance Container „Football“Made of durable plastic.Universal size for removable upper appliances, bimaxillary appliances and function regulators.Color: black-white
163-805-01 10 pieces
Appliance Container „Stardust“Made of durable plastic.Universal size for removable upper appliances, bimaxillary appliances and function regulators.Color: blue (with silver-colored Dentaurum-Logo)
163-806-01 10 pieces
315
Notes