The Series 4000 Platform provides fully meshed connectivity that greatly increases port density and bandwidth over previous generation technologies. Customers require a visibility infrastructure that can keep up with the additional bandwidth needed for video streaming, electronic commerce, social networking and other advanced applications. The APCON Series 4000 Platform delivers high port density which optimizes IT efficiencies and maximizes ROI of existing network infrastructure. The Series 4000 also delivers instant data access and virtual/cloud monitoring integration for visibility to secure critical workloads.

• Chassis with high capacity and high blade-to-blade traffic bandwidth

• Blades — 36 ports at 40G/100G and 52 ports at 48 × 1G/10G/25G and 4 × 40G/100G

• Intuitive software for configuration and management

• End-to-end infrastructure that enables monitoring, securing and analyzing of physical, virtual and cloud networks

• Advanced features — aggregate, filter, load balance, and advanced packet processing such as deduplication, protocol header stripping, packet slicing, tunnel termination, and NetFlow Generation (with HyperEngine Blade installed)

• HyperEngine Blade — 600G high performance packet processor for real-time processing of 1/10/40/100G feeds

Security, Network Analysis andApplication Performance Tools

APCON TAP

PHYSICAL DATACENTER

Tool Optimization• Packet Slicing • Protocol Stripping• Deduplication• Load Balancing• Tunnel Termination

100G / 40G / 25G / 10G / 1G

APCON ADVANCED HYBRIDVISIBILITY PLATFORM

T

T

T

T

TT

APCON HYBRID VISIBILITY SOLUTIONS

Cisco ACI

IntellaTap-VM™for Private Cloud

IntellaCloudfor Public Cloud

APCON Terminationfor Cisco ACI

THE WORLD'S HIGHEST CAPACITY VISIBILITY PLATFORMS

Introducing

D A T A S H E E T

Series 4000 Controller CardACI-4040-C 5RU Series 4000 ChassisUp to 4 blades

ACI-4020-C 3RU Series 4000 ChassisUp to 2 blades

ACI-4080-C 9RU Series 4000 ChassisUp to 8 blades

Series 4000 Fabric Card for 5RU Chassis

The APCON Series 4000 Chassis consist of the ACI-4020-C 3RU, the ACI-4040-C 5RU and the ACI-4080-C 9RU chassis, the next generation of APCON network visibility appliances. Dual front-facing controller cards with touchscreen provide fail-over operation for uninterrupted continuity. All three chassis can be configured with up to six next generation switch fabric cards, providing full mesh connectivity with the blades through the backplane, offering a dramatic increase in bandwidth potential, up to five times over that achieved in previous generation products. The more fabric cards you install, the higher the blade-to-blade traffic bandwidth.

SERIES 4000 CHASSIS

Component Weight

Controller ea. 1.5 lbs (0.68 kg)

Power Supply ea. 2.55 lbs (1.13 kg)

3RU Fabric Card ea. 0.95 lbs (0.43 kg)

5RU Fabric Card ea. 5.85 lbs (2.65 kg)

9RU Fabric Card ea. 7.0 lbs (3.17 kg)

Air Blocker Insert ea. 5.4 lbs (2.44 kg)

SPECIFICATIONS

ACI-4020-C (3RU) ACI-4040-C (5RU) ACI-4080-C (9RU)

Description 2 Blade Slot Chassis, maximum two controller cards, six fabric cards, and two power supplies

4 Blade Slot Chassis, maximum two Controller cards, six fabric cards, and four power supplies

8 Blade Slot Chassis, maximum two Controller cards, six fabric cards, and six power supplies

Port Density

1G 96 192 384

10G 96288 (with 40G × 4 breakout cable)

192

576 (with 40G × 4 breakout cable)

384

1,152 (with 40G × 4 breakout cable)

25G 96288 (with 100G × 4 breakout cable)

192

576 (with 100G × 4 breakout cable)

384

1,152 (with 100G × 4 breakout cable)

40G 72 144 288

100G 72 144 288

Cooling Front-to-Back

Synchronized Clock

Provided by Controller

Controllers Front Mounted, Fully Redundant

LCD On each Controller

Chassis PowerAC Power SupplyP/N ACI-3100-AC

• Certified “Platinum” efficiency • 180-264 VAC (high line)• 2,000 Watts continuous / 2,100 Watts peak at high line voltage• Hot-plug capable• Status LED

Chassis Size 17.54" W × 5.23" H × 31.5" L (44.45 W × 13.33 H × 80.01 L cm)

17.54" W × 8.70" H × 31.5" L (44.45 W × 22.22 H × 80.01 L cm)

17.54" W × 15.70" H × 31.5" L (44.45 W × 40.10 H × 80.01 L cm)

Chassis Weight* 35 lbs (15.87 kg) 47.5 lbs (21.54 kg) 82.5 lbs (37.41 kg)

Operating Temp 32°F to 113°F (0°C to 45°C)

Storage Temp –40°F to 158°F (–40°C to 70°C)

Relative Humidity

Operating: 10% to 85% (non-condensing); Storage: 0-95% (non-condensing)

Cooling Requirements

14,700 BTU/hr 29,500 BTU/hr 44,500 BTU/hr

* Fully loaded ACI-4020-C 1 3RU chassis, with two power supplies, six fabric cards, two controllers, and two blades weighs approximately 100 lbs. Fully loaded ACI-4040-C – 1 5RU chassis, with four power supplies, six fabric cards, two controllers, and four blades weighs approximately 150 lbs. Fully loaded ACI-4080-C – 1 9RU chassis, with six power supplies, six fabric cards, two controllers, and eight blades weighs approximately 300 lbs.

ACI-4030-E36 SPECIFICATIONS ACI-4030-E52 SPECIFICATIONS

Port Density • 36 × 40/100G front panel ports capable of supporting 40 and 100G QSFP28 fiber modules

• The QSFP28 ports also support port breakout.

Port breakout breaks a 40G port into 4 × 10Gbps ports or a 100G port into 4 × 25G ports

• The E52-1 blade supports 48x 1/10/25G SFP/SFP+ and 4x 40/100G QSFP28 front panel ports

- 48 SFP+ ports capable of supporting 1G, 10G, or 25G.

- 4 QSFP28 ports capable of supporting 40G or 100G.

• The QSFP28 ports also support port breakout. Port breakout breaks a 40G port into 4 × 10Gbps ports or a 100G port into 4 × 25Gbps ports using breakout cables.

Blade size 17.24" W × 17.46" D × 1.63" H (43.78 W × 44.32 D × 4.11 H cm)

17.31” W × 17.31” D × 1.50” H (44 W × 44 D × 3.8 H cm)

Blade Weight ACI-4030-E36-1 20.0 lbs (9.07 kg); ACI-4030-E36-2 21.5 lbs (9.75 kg) with no transceivers installed

13 lbs (5.89 kg) with no transceivers installed

Operating Temp 32 to 113°F (0 to 45°C) 32 to 113°F (0 to 45°C)

Storage Temp –40°F to 158°F (–40°C to 70°C) –40°F to 158°F (–40°C to 70°C)

Relative Humidity Operating: 10-85% non-condensing; Storage: 0-95% non-condensing

Operating: 10-85% non-condensing; Storage: 0-95% non-condensing

Blade power 540 Watts for E36-1, 700 Watts for E36-2 with no transceivers installed

280 Watts with no transceivers installed

Thermal Load 1,842.60 BTU/hr with no transceivers installed 955.40 BTU/hr with no transceivers installed

Power Status LEDs Blade Power, Status, Port Link, Tx/Rx activity Blade Power, Status, Port Link, Tx/Rx activity

ACI-4033-E00-1 SPECIFICATIONS

Performance 6 service engines; total up to 600Gbps**

Memory 64GB of DDR4 per service engine

Deduplication ACI-9330-002

NetFlow Generation ACI-9330-004

Blade Size 17.24” W × 17.46” D × 1.63” H (43.78 W × 44.32 D × 4.11 H cm)

Blade Weight 16.5 ibs (7.5 kg)***

Operating Temp 32 to 113 °F (0 to 45 °C)

Storage Temp -40 to 158 °F (-40 to 70 °C)

Blade Power 750-900 Watts / 2560-3072 BTU***

Relative Humidity Operating: 10-85%; Storage: 0-95% noncondensing

The APCON Series 4000 consist of the ACI-4030-E36 and the ACI-4030-E52 Blades, with aggregation and filtering technologies that make it easy to monitor high-speed networks. With the broadest range of advanced features including packet slicing, filtering, data rate conversion, protocol stripping, load balancing, port tagging, tunnel termination and packet deduplication (ACI-4030-E36-2 only), network engineers are confident the right traffic is delivered to the right tools all the time.

The Series 4000 HyperEngine blade delivers advanced features for ultra-high-speed network infrastructure. It adds superior, industry leading processing power (600 Gbps) to the Series 4000 for real time packet processing and delivering enhanced network visibility with significantly increased efficiency and effectiveness of the network security, analytics and performance monitoring solutions.

SERIES 4000 HYPERENGINE PACKET PROCESSOR BLADE

SERIES 4000 BLADES

INTELLAVIEW USER INTERFACE

The E36 & E52 blades support filtering utilizing access control lists (ACL) filters. An ACL filter works by selectively permitting or denying traffic based on specified criteria. Filtering of the following is supported:

• Layer 2: MAC, VLAN, MPLS, or Ethertype• Layer 3: Source and Destination IPv4 and IPv6 sessions, DSCP, or IP Protocol• Layer 4: Port Number or TCP Control

The E36 & E52 blades can be configured to supports the following types of connections between ports:

• One-to-One• One-to-Many• Many-to-Many• Many-to-One• One-to-load balance group (LBG)• Many-to-load balance group (LBG)

The following modes are supported in each of the above connections types:

• Standard connections• Aggregated TAP connections• Duplex connections

Access Control Lists (ACL) Filtering

Connections

INTUITIVE WEB-BASED GUI FOR NETWORK VISIBILITY

The following features are supported, through either the CLI or GUI:

• Tunnel Termination/De-Encapsulation – ERSPAN, GRE and VxLAN• Packet Slicing• Deduplication• Port Tagging• Protocol Header Stripping – All ports are able to strip the following protocol header types:

– VLAN– Fabric Path– MPLS– MPLS PWE (Pseudo Wire Emulation)– NVGRE– VxLAN– GRE– ERSPAN for Cisco ACI– NetFlow Generation (with HyperEngine Blade installed)

Features

FEC is supported on a per port basis, in compliance with:

• Reed-Solomon for 100GE• Reed-Solomon and Fire Codes for 25GE

Enabling, disabling, and choosing which FEC mode is available and is performed through either the CLI or GUI.

Forward Error Correction (FEC)

The E36 & E52 blades support egress load balance groups (LBGs).Load Balancing

APCON SOLUTIONSAPCON leverages its proprietary IP and deep expertise to provide flexible, focused solutions across

• Government• Healthcare• Higher Education• Financial Services• Manufacturing• Telecommunications

APCON solutions provide the flexibility and means to gain visibility to their data more efficiently, resulting in savings across the board, including time, resources and maintenance.

SERVICE AND SUPPORTAPCON’s professional services team of certified engineers have years of experience optimizing network visibility strategies for businesses across the globe. In addition to providing installation assistance of existing analysis tools, this team proudly provides around the clock troubleshooting services and support.

ABOUT APCONA privately held corporation, APCON is headquartered near Portland, Oregon, where it has operated since 1993. APCON’s in-house staff manages product design and development, manufacturing, quality assurance and final testing, customer training and long-term servicing of its solutions – whether for a system with a single switch or a global installation that spans across multiple geographical or cloud locations.

THE APCON DIFFERENCE

APCON’s network monitoring and security solutions for enterprises provide superior packet processing technology for total visibility and security layer of the network.

APCON, Inc. ▪ 9255 SW Pioneer Court, Wilsonville, Oregon 97070+1 503–682–4050 ▪ 1–800–624–6808 ▪ apcon.com© 2020 APCON, Inc. All Rights Reserved. @APCON ▪ company/APCON 18045-0520