IQ - Cooper Industries Driven to provide ... classrooms and lecture halls where varying light levels may be required to accommodate ... Please consult your Cooper Lighting Representative

1

I Q

Driven to provide the market with luminaires of an uncompromised caliber, Corelite now presents a complete Iridium family,

versatile enough to satisfy any application and sleek enough to please the most discriminating palette. The innovative new

Iridium I Q, the “Smart Fixture,” leads the way in optical and aesthetic flexibility with the introduction of a third Slide-N-LockTM

scale, a second optional die-cast end cap, and another opportunity to take advantage of the glare-reduction capability of the

Eclipse Louver. Rounding out the family are the Iridium D/I and Iridium Perf which offer a variety of distributions, enabling

spaces designed with varied light levels to achieve one cohesive aesthetic feel.

lighting design: Gensler photography: Sherman Takata

D / I

P e r f

C o r e l i t e t e l 3 0 3 . 3 9 3 . 1 5 2 2 f a x 3 0 3 . 3 9 3 . 1 4 7 7 w w w . c o r e l i t e . c o m3

I r i d i u m D/ I L a m p I s o l a to r s

U p l i g h t O n l y D ow n l i g h t O n l y U p l i g h t / D ow n l i g h t

I r i d i u m I Q D ow n l i g h t I s o l a to r s

RPerformance™ Louver (IB-WH)

Cross Blade Louver (IB-WB)

D - U - DD - X - DX - U - XU - D - UU - X - UX - D - X

U=Isolator UpD=Isolator Down

X=No Isolator

In addition to the familiar standard Straight Iridium end cap, the introduction of the Iridium IQ brings with it a second die-cast end cap with a trimmer finish and a unique taper. The new Beveled end cap is available on all three Iridium suspended fixtures as well as the Iridium Perf wall mounted luminaire. The standard Straight end cap will be provided if no end cap is specified. As always, end caps are mechanically attached without any exposed fasteners in order to sustain the sleek aesthetic appeal.

Lamp isolators are excellent tools to aid in increasing optical control in a space. The ability to isolate uplight and downlight, combined with dual level switching, offers a world of possibilities in energy savings and creative scene and zone control for changeable room character and utility. This feature is ideal for training rooms, classrooms and lecture halls where varying light levels may be required to accommodate a variety of tasks. Isolators also offer the perfect solution for creating optimal viewing conditions for multi-media presentations.

One, two or three formed aluminum isolators can be used in the Iridium D/I to efficiently produce the desired distribution of uplight and downlight suitable for the application and the tasks performed in it. The lamp isolators may be used in six different combinations with the Cross Blade Louver and three combinations with the RPerformanceTM Louver.

I r i d i u m I Q

I r i d i u m D/ I

S t a n d a rd Pe r fo ra te d B a f f l e ( I Q-W B ) Ec l i p s e L o u ve r ( I Q-W E )

O p a l L e n s ( I Q-WO) S q u a re Pe r f ( I Q-W R ) Ro u n d Pe r f ( I Q-W P )

Co n c ave M e t a l l i c Pe r f( I B -WC )

R Pe r fo r m a n ce ™ L o u ve r( I B -W H )

C ro s s B l a d e L o u ve r( I B -W B )

M e d i a O p t i o n s

E n d C a p s

The two formed aluminum covers of the downlight isolators effectively isolate the outboard downlight components of the Iridium IQ. When used in a 3 or 4 lamp configuration, the downlight isolators allow complete isolation of uplight and downlight, creating three distinct distributions.

S t ra i g h t ( E S ) B eve l e d ( E B )

2

I r i d i u m I Q

C o r e l i t e t e l 3 0 3 . 3 9 3 . 1 5 2 2 f a x 3 0 3 . 3 9 3 . 1 4 7 7 w w w . c o r e l i t e . c o m4 5

I r i d i u m D/ I

The original revolutionary Slide-N-LockTM optics designed for the

Navigator II can also be specified for the Iridium D/I. Rather than

one optic per configuration, the Iridium D/I Slide-N-LockTM is a one-

size-fits-all optic with 8 settings that are factory pre-set at the specified

level and, if necessary, can later be easily adjusted in the field.

To adjust, simply depress the control notch, then “slide-n-lock” the optic

into the new desired setting.

*All distributions based on a 2T8 lamping

Beginning at the DL1 setting of 95% downlight, the Slide-N-LockTM can be

field adjusted in 5% increments up to the DL8 setting of 60% downlight.

Because the optic is field adjustable, zones and scenes within a space

become completely flexible and can accommodate any task as needed.

Taking the level of optical control one step further, Corelite’s Slide-N-LockTM optics revolutionizes

the concept of variable uplight and downlight percentages within a direct-indirect luminaire.

The addition of the innovative Slide-N-LockTM to either the new Iridium IQ or the Iridium D/I

enhances downlight control well beyond the traditional single percentage downlight kit.

The launch of the new Iridium IQ is also the introduction of a third scale

of Slide-N-LockTM that accommodates the isolation of the two outboard

lamps only, opening wide a whole new range of opportunity for advanced

optical control. When applied in a two lamp fixture, the IQ Slide-N-LockTM

performs much like the original version, with optical control from 95%

to 60% downlight. However, because the Iridium IQ can be specified

with up to 4 lamps, there is now the opportunity not only to increase

the overall percentage of uplight by adding a center lamp, but to utilize

dual-level switching as well. When used in combination with a dimming

system, the possibilities become endless.

PROJECT NAME: TYPE:

CATALOG #: - - - - - - - -

*Not all options available. Please consult your Cooper Lighting Representative for availability and technical information. Specifications and dimensions subject to change without notice.

E c l i p s e L o u ve r

( I Q-W E )

O p a l L e n s

( I Q-WO)

S q u a re Pe r f

( I Q-W R )

Ro u n d Pe r f

( I Q-W P )

12'8'

4'

· Direct-indirect or semi-indirect fluorescent lighting

· Increased downlight via two segmented open baffles or lensed apertures

· Available with standard Straight or optional Beveled die-cast end caps

· Standard white powder coat finish on housing

· Individual or continuous mounting

· 4’, 8’, or 12’ fixture lengths

· Quick connect wiring

· T8 and T5 capability

· Slide-N-Lock™ optics

· Downlight kit

C o r e l i t e t e l 3 0 3 . 3 9 3 . 1 5 2 2 f a x 3 0 3 . 3 9 3 . 1 4 7 7 w w w . c o r e l i t e . c o m

The highest IQ in its class...

Ir id ium IQOrdering Information:SAMPLE NUMBER:IQ-WB-3T8-2C-120-AC18-T1-24'-DL6

2-1/2" [63MM]

9" [228MM]

T8 T5

I Q-W B w i t h s t a n d a rd S t ra i g h t e n d c a p s ( E S )

B eve l e d e n d c a p ( E B )

l i g h t i n g d e s i g n : To m C u r t i s p h o to g ra p hy : S e a n G ayd o s

... Introducing the Iridium IQ, Corelite’s new “Smart Fixture.”

Smart because it represents a culmination of the most intelligent

and innovative features Corelite has to offer, including a third

scale of the unique Slide-N-Lock™ optical system. The IQ comes

standard with an open perforated baffle, but also presents a

second opportunity to specify the acclaimed, glare-reducing

Eclipse louver. Its sleek dual-layered ribbed aluminum runners

offer not only a practical appeal, but a look completely unique in

the market as well. The IQ can also be specified as a semi-indirect

fixture with the addition of a variety of acrylic lenses.

Construction: Housing is one piece die-formed cold rolled steel, forming a 9"x2-1/2" architectural profile. Standard 4'-0", 8'-0", and 12'-0" fixture lengths combine for continuous runs.

Reflectors: Reflector pan is painted with a high reflectance white powder coat finish. Optional die-formed side reflectors are highly specular anodized aluminum.

Louvers: Standard white aluminum perforated blades. Optional Eclipse louver with white perforated blades and ribbed diffuse anodized aluminum runners.

Lenses: Standard white opal. Optional round perf or square perf

Electrical: T5HO fixtures are prewired with quick wire connectors and use UL listed Class P, T5HO program rapid start universal voltage electronic ballasts, power factor of 97% with less than 10% THD. T8 fixtures are prewired with quick wire connectors and use instant start UL listed Class P, 265ma T8 electronic ballasts, power factor of 95% with less than 20% THD. Fixtures and electrical components certified to UL and CUL standards.

Mounting: Standard aircraft cable mounts on 4'-0", 8'-0", and 12'-0" centers. Refer to spec sheets for various ceiling interface details and rigid pendant mounting details.

Finish: Fixture housings are standard white using electrostatically applied polyester powder coat paint.

End Caps: End caps are precision die-cast aluminum mechanically attached without exposed fasteners.

SeriesIQ=Iridium IQ Suspended

OPTICS UPW=WhiteS=Specular

OPTICS DOWNOpen BaffleB=Perforated BaffleE=Eclipse Louver

LensedO=White Opal LensP=Round Perf LensR=Square Perf Lens

NUMBER OF LAMPS 2=2 Lamps (T5, T8)3=3 Lamps (T5, T8)4=4 Lamps (T8)

LAMP TYPE(LENGTH)T8=32W(4' Unit)T5=54W(4' Unit)

NUMBER OF CIRCUITS*1=1 Circuit2=2 Circuits

WIRING*C=Standard CircuitD=DimmingE=Emergency B=Battery PackT=NightlightY=Daylight

VOLTAGE*120= 120V277= 277V347= 347VUNV= Universal (120V-277V)

SUSPENSIONA=Aircraft CableP=Rigid Pendant

POWER FEED*C=Straight CordK=Curly CordP=Rigid Pendant

SUSPENSION LENGTH-Fixed Cable12", 15", 18", 21", 24" or 27" (+/- 1/2” adjustment)

-Adjustable Cable48", 120", 240", 300", or 360"(infinite adjustment along entire length of cable)

-Rigid Pendant12", 15", 18", 21", 24" or 27"

CEILING TYPE*T1= 1" T-BarT9= 9/16" T-BarTS= Slotted T-BarST= StructureJB= 4" Squared J-Box

RUN LENGTHSpecify luminaire length in feet. -Individually Mounted Luminaires may be 4',8', or 12' in length. -Continuously MountedStandard row configurations over 12' consist of 8' and 12' sections.

OPTIONSES=Straight End Cap (provided if none specified)EB=Beveled End CapDL=Downlight IsolatorsSlide-N-LockTM

DL1=95% Downlight DL5=75% DownlightDL2=90% Downlight DL6=70% DownlightDL3=85% Downlight DL7=65% DownlightDL4=80% Downlight DL8=60% Downlight

76

PROJECT NAME: TYPE:

CATALOG #: - - - - - - - -


...No matter your design goal, the Iridium D/I comes equipped

with the louver option to satisfy it. Constructed of semi-specular

aluminum, the standard Cross Blade louver is the versatile and

efficient louver option, and is also the preferred louver when

used in combination with Slide-N-Lock™ optics. The unique

RPerformance™ louver has been designed to enhance the refined

styling of the luminaire and eliminates high angle glare according

to RP-1 guidelines. Finally, the Concave Metallic Perf insert is an

elegant natural metal accent that creates a subtle sparkle while

offering an awareness of the light source, and transforms the

Iridium D/I into a semi-indirect luminaire.

C ro s s B l a d e L o u ve r( I B -W B )

R Pe r fo r m a n ce TM L o u ve r( I B -W H )

Co n c ave M e t a l l i c Pe r f( I B -WC )

· Direct-indirect or semi-indirect fluorescent lighting


· Optional adjustable cable for infinite field suspension adjustment



· 4’ or 8’ fixture lengths

· Three louver options


· Slide-N-Lock™ optics

· Lamp isolators


12'8'

4'

A means to every end...

12'8'

4'

2-5/8" [67MM]

9" [228MM]

T8 T5

Ir id ium D / IOrdering Information:SAMPLE NUMBER:IB-WB-3T5-2C-120-AC18-T1-24'-DL2

I B -W H w i t h s t a n d a rd S t ra i g h t e n d c a p s ( E S )


a rc h i t e c t u re : A rc h i t e c t u ra l Wo r ks h o p p h o to g ra p hy : A m a n d a J o rd a n

98



Louvers: Cross Blade and RPerformance are continuous semi-specular aluminum. Perf is semi-specular material, perforated section is 15% open with 0.062" diameter holes and opal diffuser.


Mounting: Standard aircraft cable mounts on 4'-0" and 8'-0" centers. Refer to spec sheets for various ceiling interface details and rigid pendant mounting details.


End Caps: Standard end caps are precision die-cast aluminum mechanically attached without exposed fasteners.

SeriesIB=Iridium D/I Suspended


OPTICS DOWNB=Cross Blade LouverH=RPerformanceTM LouverC=Concave Metallic Perf

NUMBER OF LAMPS 1=1 Lamp (T5 )2=2 Lamps (T5, T8)3=3 Lamps (T5)









-Rigid Pendant12", 15", 18", 21", 24" or 27"


RUN LENGTHSpecify luminaire length in feet. -Individually Mounted Luminaires may be 4' or 8' in length. -Continuously MountedStandard row configurations over 8' consist of 4' and 8' sections.

OPTIONSES=Straight End Cap (provided if none specified)EB=Beveled End CapSlide-N-LockTM

DL1=95% Downlight DL5=75% DownlightDL2=90% Downlight DL6=70% DownlightDL3=85% Downlight DL7=65% DownlightDL4=80% Downlight DL8=60% DownlightLamp IsolatorsDL/UDU=2 lamps up 1 lamp downDL/DUD=2 lamps down 1 lamp upDL/UXU=2 lamps upDL/DXD=2 lamps downDL/XUX=1 lamp upDL/XDX=1 lamp down

... In keeping with the Iridium Family’s ability to impart a

customized look with standard options, the Iridium Perf offers

the standard Straight die-cast aluminum end cap, as well as the

option to specify the new Beveled end cap. As always, the end

caps are mechanically attached without any exposed fasteners in

order to sustain the streamlined aesthetic appeal.

PROJECT NAME: TYPE:

CATALOG #: - - - - - - - -

*Not all options available. Please consult your Cooper Lighting Representative for availability and technical information. Specifications and dimensions subject to change without notice. C o r e l i t e t e l 3 0 3 . 3 9 3 . 1 5 2 2 f a x 3 0 3 . 3 9 3 . 1 4 7 7 w w w . c o r e l i t e . c o m

Standard features

with custom appeal...

· Semi-indirect fluorescent lighting


· Optional adjustable cable for infinite field suspension adjustment

· Perforated fixture housing creates a soft downlight component

· T-bar integration and 48” incremental suspension points



· 4’, 8’, or 12’ fixture lengths

· Quick connect wiring


12'8'

4'

Ir id ium PerfOrdering Information:SAMPLE NUMBER:IP-WP-3T5-1C-120-AC18-T1-24

I P -W P w i t h s t a n d a rd S t ra i g h t e n d c a p s ( E S )

l i g h t i n g d e s i g n : Ke n L a r s e n p h o to g ra p hy : M a u r i ce D u n n

2-1/2" [63MM]

9" [228MM]

T8 T5

1110

S t ra i g h t e n d c a p ( E S )





Mounting: Standard aircraft cable mounts on 4'-0", 8'-0", and 12'-0" centers. Refer to spec sheets for various ceiling interface details and rigid pendant mounting details.


End Caps: Standard end caps are precision die-cast aluminum mechanically attached without exposed fasteners.

SeriesIP=Iridium Perf Suspended


OPTICS DOWNP=Perforated

NUMBER OF LAMPS 1=1 Lamp (T5 )2=2 Lamps (T5, T8)3=3 Lamps (T5, T8)4=4 Lamps (T8)









-Rigid Pendant12", 15", 18", 21", 24" or 27"


RUN LENGTHSpecify luminaire length in feet. -Individually Mounted Luminaires may be 4',8', or 12' in length. -Continuously MountedStandard row configurations over 12' consist of 8' and 12' sections.

OPTIONSES=Straight End Cap (provided if none specified)EB=Beveled End Cap

PROJECT NAME: TYPE:

CATALOG #: - - - - - - - -


7" [178MM]

2-1/2" [63MM]

T8 T5

... In keeping with the sleek profile and sophisticated design of

the Iridium series, the Iridium Perf Wall mount offers the standard

Straight die-cast aluminum end cap, as well as the option to

specify the new Beveled end cap. As always, the end caps are

mechanically attached without any exposed fasteners in order to

sustain the streamlined aesthetic appeal.

Ir id ium WALLOrdering Information:SAMPLE NUMBER:IW-SP-1T8-1C-120-277-SU-WA-32'

Sleek and sophisticated

to the end...

· Semi-indirect fluorescent lighting


· Mounts directly to existing structure over standard 2”x4” J-Boxes

· Perforated fixture housing creates a soft downlight component

· Individual or continuous mounting with 4’ or 8’ sections


· Asymmetric forward throw distribution

· Quick connect through wiring


8'4'


l i g h t i n g d e s i g n : B C E R E n g i n e e r i n g , I n c . p h o to g ra p hy : J a c q u e l i n e M ye rs

1312

I W- S P w i t h s t a n d a rd S t ra i g h t e n d c a p s

S t ra i g h t e n d c a p ( E S )


Construction: Housing is one piece die-formed cold rolled steel, forming a 7"x2-1/2" architectural profile. Standard 4'-0" and 8'-0" fixture lengths combine for continuous runs.

Reflectors: Die-formed reflectors are highly specular anodized aluminum.


Mounting: Fixture mounts directly to existing structure over a 2"x4" standard electrical box mounted horizontally into the wall.


End Caps: Standard end caps are precision die-cast aluminum, mechanically attached without exposed fasteners.

SeriesIW=Iridium Wall

OPTICS UPS=Specular

OPTICS DOWNP=Perforated

NUMBER OF LAMPS 1=1 Lamp2=2 Lamps





MOUNTINGSU-WA=Surface Wall Mount

RUN LENGTHSpecify luminaire length in feet. -Individually Mounted Luminaires may be 4' or 8' in length. -Continuously MountedStandard row configurations over 8' consist of 4' and 8' sections.

OPTIONSES=Straight End Cap (provided if none specified)EB=Beveled End Cap

Corelite4675-A Holly StreetDenver, Colorado 80216Tel 303 393 1522Fax 303 393 1477

CUSTOMER FIRST CENTER1121 Highway 74 SouthPeachtree City, Georgia 30269Tel 770 486 4800Fax 770 486 4801

Domestic Facilities, USACranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia

International Sales, USAPeachtree City, Georgia

CANADACooper Lighting5925 McLaughlin RoadMississauga, Ontario L5R 1B8Tel 905 507 4000Fax 905 568 7049

Domestic Facilities, CanadaCalgary, AlbertaChomedey, Laval P.Q. Cooper Lighting, Inc.All rights reserved.

Specifications and dimensions subjectto change without notice.

Printed in USA.

The Cooper Lighting Family:HaloCooper Lighting-MetaluxCooper Lighting-LumarkCooper Lighting-Sure-LitesNeo-RayCorelitePortfolioIrisShaperLumièreInvueMcGraw-Edison Fail-SafeMWSDLSRSAAmetrix

www.cooperlighting.com ADE051104

USE OF THIS LOGO DOES NOTIMPLY EPA ENDORSEMENT

A R C H I T E C T U R A L I N D I R E C T S O L U T I O N S

Documents

IQ - Cooper Industries Driven to provide ... classrooms and lecture halls where varying light levels may be required to accommodate ... Please consult your Cooper Lighting Representative