Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Corps de la pompe en fusion d’acier inox AISI 316. Chariot articulé sur quatre roues caoutchoutée, facile à transporter. Réducteur à engrenages hélicoïdaux qui travaillent en bain d’huile pour atténuer le bruit.Piston à deux calottes en caoutchouc spécial. Inversion de flux obtenue avec l’actionnement du levier relatif sans déplacer les tuyaux. Le presso-stat permet d’arrêter et mettre en marche le moteur automatiquement. Transmission actionnée par moteur électrique triphasé à deux vitesses au moyen de courroies trapézoïdales. La soupape d’inversion et toutes les parties en contacte avec le vin sont en acier inox.
Les pompes sont autoamorçantes jusqu’à une profondeur de 9 mètres au dessous du niveau de la pompe et atteignent une pression de travail de 4 atm.Les pompes Revello sont construites en fusion, cette caractéristique leur donne une grande robustesse et durée dans le temps : l’inverseur à papillon et les amples espaces favorisent le passage pas seulement de liquides mais aussi de moûts, raisins égrappés, lies, purée. Le piston à course longue et le nombre réduit de coups du piston permettent un soutirage soupe, sans chauffage du produit soutiré, pas de problème en cas de fonctionnement à sec ou pour le transvasement de produits avec des corps solides en suspension, peu d’entretien.Le corps pompe et toutes les parties en contacte avec le liquide sont en acier inox, de cette manière on donne solution au problème de la cession des métaux. Pour éviter toute stagnation du liquide dans la machine on recommande un lavage à fin de journée. L’installation électrique conforme CE est équipé de transformateur 24 Volts, deux thermiques protègent le moteur de saut de courant ou ab-sorptions.Aux pompes on peut appliquer moteurs avec l’inverter qui permet de régler un débit variable.Sur demande il est possible di monter une radiocommande pour mise en marche, arrêt et change de vitesse.
Corpo pompa in acciaio inox fuso AISI 316.Carrello snodato su quattro ruote gommate di facile trasporto. Riduttore ad ingranaggi elicoidali la-voranti a bagno d’olio,assicurano la massima silenziosità. Pistone a due calotte in gomma speciale. Inversione di flusso azionando apposita leva senza muovere le tubazioni. Il pressostato consente di fermare ed avviare automaticamente il motore.Trasmissione azionata da motore elettrico tri-fase a due velocità per mezzo di cinghie trapezioidali. L’inversione e tutte le parti a contatto con il vino sono in acciaio inox.
Le pompe sono autodescanti fino ad una profondità di 9 m. sotto il livello della pompa e raggiungono una pressione di esercizio di 4 atm.Le pompe Revello sono costruite in fusione, che conferisce grande robu-stezza e durata nel tempo, invertitore a farfalla e ampi spazi favoriscono il passaggio non solo di liquidi, ma di mosti, uva diraspata, feccia, purea. La lunga corsa e il basso numero di colpi del pistone permettono un soffice travaso, nessun riscaldamento del prodotto travasato, nessun problema per il funzionamento a secco, nessun problema per travaso di liquidi con corpi solidi in sospensione, poca manutenzione.Il corpo pompa e tutte le parti a contatto con il liquido sono in acciaio inox, in questo modo si risolve il problema della cessione di metallo. Per evitare il ristagno di liquido nella macchina si consiglia un lavaggio a fine giornata.L’impianto elettrico a norme CE è dotato di trasformatore 24 Volts due termiche proteggono il motore da eventuali sbalzi di tensione o eccessevi assorbimenti.Alle pompe è possibile applicare motore con inverter che permette una portata variabile.A richiesta è possibile montare radiocomando per accensione, spegni-mento e cambio velocità.
Pump body of cast AISI 316 stainless steel. Articulated trolley with four rubber-tyred wheels for easy transport. Reducer with helical gears wor-king in an oil bath guarantee utmost noiselessness. Piston with two ho-ods of special rubber. Flow inversion obtained activated the suitable lever without removing the pipes. The manostat allows starting and stopping the motor automatically. Drive operated through a 3-phase two-speed electrical motor through trapezoid belts. The flow reverse valve and all parts in contact with the wine are made of stainless steel.
The pumps are self-priming till a dept of 9 m under the level of the pump and reach a working pressure of 4 atm.Revello pumps are manufactured of cast, which gives them great stur-diness and long life, throttle reverse gear and wide spaces facilitate the passage not only of the liquids but also musts, grapes without stalks,
ATENA INOX VENERE INOX URANIA INOX 2P 100 INOX
Per travaso liquidi, feccia e olio.Pour transvasement de liquides, lies et huiles.To transfer liquids, oil, lees.
Per travaso liquidi, uva pigiata diraspata, feccia e olio.Pour transvasement de liquides, des raisins pres-sés, ègrappés, de lies et huiles.To transfer liquids, must, oil, lees.
Per travaso liquidi, uva pigiata diraspata, feccia e olio.Pour transvasement de liquides, des raisins pres-sés, ègrappés, de lies et huiles.To transfer liquids, must, oil, lees.
Per travaso liquidi, uva pigiata diraspata, feccia e olio.Pour transvasement de liquides, des raisins pres-sés, ègrappés, de lies et huiles.To transfer liquids, must, oil, lees.
ELETTROPOMPE PERISTALTICHEÉLECTROPOMPES PERISTALTIQUES
PERISTALTIC ELECTROPUMPS
ELETTROPOMPE A PISTONEÉLECTROPOMPES Á PISTONPISTON ELECTROPUMPS
dregs, puree. The long stroke and low number of piston shots allow soft wine racking, no heating of the transferred product, problem-free dry running, no problems for racking of wines with solid bodies in suspen-sion, little maintenance. The body of the pump and all parts in contact with the liquid are of stain-less steel, which solves the problem of metal release. To avoid liquid stagnation in the machine it is advisable to perform a washing at the end of he working day. The electrical system complying with the EC standards is equipped with 24V transformer; two thermal switches protect the motor from any ten-sion rush or exceeding absorptions.The pumps can be equipped with motors with inverter that allows va-riable delivery. On demand it can be equipped also with a radio control for switch-on, switch-off, and speed change.
DATI TECNICI / DONNEES TECHNIQUES / TECHNICAL DATA
COD. ATENA VENERE URANIA 2P100Portata/Débit/Capacity Hl./h 1° - 60 1° - 110 1° - 170 1° - 280
2° - 120 2° - 200 2° - 300 2° - 500
Tubazioni/Tuyaux/Pipes mm. 40/50 50/60/70 60/70/80 80/100
Prevalenza/Prévalence/Prevalence m. 30 30 30 30
Ingombro/Dimensions L x P x H 880 x 510 1100 x 600 1300 x 780 1470 x 760 mm. 810 H. 1050 H. 1100 H. 1100 H.
Peso/Poids/Weight Kg. 140 235 315 525
Potenza/Puissance/Power Hp. 2.1/1.6 3.4/2.5 6/4.5 7.5/6
Sta
mp
a: M
ail
Bo
xe
s E
tc
. C
an
ell
i -
01
41
82
26
75
ELETTROPOMPE A PISTONEÉLECTROPOMPES Á PISTON / PISTON ELECTROPUMPS
ELETTROPOMPE A PISTONEÉLECTROPOMPES Á PISTON / PISTON ELECTROPUMPS
La pompe péristaltique se base sur le
principe du péristaltisme, selon lequel, la
prévalence au fluide traité est donnée par
la compression qui glisse le long du tube.
Avec cette méthode le fluide plus ou moins
dense est transporté de manière souple et
délicate. La pompe est apte au soutirage et
transvasement de liquides (vin,jus de fruit,
lait, huile) et produits semisolides (raisins
entiers, pressés et égrappés, tomates). La
pompe consiste en un rotor auquel sont ap-
pliqué deux rouleaux qui en tournant com-
priment le tube en caoutchouc et causent
l’avancement du fluide. L’alternance entre
compression et relâchement du tube crée
un vide apte à aspirer le produit et par con-
séquent un refoulement constant. Les avan-
tages de ce type de pompe sont un pompage
délicat sans oxydations, chocs, émulsions,
écrasement de baies et pépins de raisins et
possibilité d’éviter tout contact entre produit
et parties mécaniques.
SPECIFICATION• Stainless steel pump body AISI 304• Rotor with two rolls mounted on beraings• Motor reducer directly applied on the
bearing element• AISI 304 stainless steel self supporting
stand• Control panel with reverse feature• Double pipe of rubber for use in food
industry• “Inverter” electronic speed variator• Expansion tank• Safety pressure swtich• Automatic lubrificationof the rubber pipe
CARATTERISTICHE• Corpo pompa in acciaio inox AISI 304• Rotore con due rulli montati su cuscinetti• Motoriduttore direttamente applicato
all’elemento portante• Carrello autoportante in acciaio inox AISI
304• Quadro elettrico con inversione di marcia• Tubo in gomma alimentare• Variatore di velocità “Inverter”• Vaso di espansione• Pressostato di sicurezza• Lubrificazione del tubo in gomma
in automatico
CARACTERISTIQUES• Corps de la pompe en acier inox AISI 304• Rotor avec deux rouleaux montès sur coussi-
nets• Motorèducteur directement appliquè sur l’élément pompant• Chariot auto-portant en acier inox AISI 304• Tableau électrique avec inverseur de marche• Tuyau en caoutchouc alimentaire• Variateur de vitesse èlectronique “inverter”• Vase d’espansion• Pressostate de sicurité• Lubrification en automatique du tuyau en caoutchouc
La pompa peristaltica si basa sul principio
della peristalsi, in base al quale, la prevalen-
za al fluido trattato viene impressa da uno
schiacciamento che scorre lungo il tubo.
Con questo metodo il fluido più o meno
denso viene trasportato in modo soffice e
delicato. La pompa è idonea al travaso di
liquidi (vino, succhi di frutta, latte, olio) e
prodotti semisolidi (uva intera, pigiata, dira-
spata, pomodoro). La pompa è costituita da
un rotore a cui sono applicati due rulli, che
ruotando schiacciano il tubo in gomma e
provocano l’avanzamento del fluido. L’alter-
nanza tra compressione e rilassamento del
tubo genera un vuoto, idoneo ad aspirare
il prodotto e di conseguenza una mandata
costante. I vantaggi di questo tipo di pom-
pa sono un pompaggio delicato evitando
ossidazioni, sbattimenti, emulsioni, schiac-
ciamento di acini e vinaccioli e contatti tra
prodotto e organi meccanici.
The peristaltic pump is based on the prin-
ciple of peristalsis according which the
prevalence to the fluid treated is given by
acrushing sliding along the pipe. With this
method the more or less dense liquids are
transported in a delicate and soft way. The
pump is suitable for the pouring of liquids
(wine, fruit juices, milk, and oil) and semi-
solid products (crushed and intact grapes,
grapes after the removal of stalks, tomato-
es). The pump consists of a rotor bearing
two rollers that while rotating compress the
rubber pipe causing the advancement of the
liquid. The alternation between compres-
sion and relaxation of the pipe generates
vacuum sucking the product and conse-
quently a constant delivery. The advantages
of this type of pump are a delicate pumping
preventing oxidizations, shakings, emul-
sions, crushing of berries and seeds, and
contacts between the product and mecha-
nical parts.
DATI TECNICI / DONNEES TECHNIQUES / TECHNICAL DATA
COD. RPE 70 RPE 150 RPE 250Rotazione/Rotation Giri/min.- Rev/min 14/70 14/70 15/58
Vino/Vin/ Wine Hl./h 14/70 30/150 70/250
Uva diraspata/Raisin Egrappé/Destemmed Hl./h - 14/100 50/175
Prevalenza/Prévalence/Prevalence m. 30 30 30
Attacchi/Connexions/Connections mm. 50 60 80
Potenza/Puissance/Power Kw. 1,5 3 5,5
Ingombro/Dimensions L x P x H 1200x710 1440x710 850x1600 mm. 970H. 1250H. 1600H.
Peso/Poids/Weight Kg. 130 180 300
HopperRPE 150 910x710x380RPE 250 1010x710x440
RPE 70 RPE 150
ELETTROPOMPE PERISTALTICHE / ÉLECTROPOMPES PERISTALTIQUES / PERISTALTIC ELECTROPUMPS
RPE 1 RPE 7Giri/min.- Rev/min 43 45
LT./h 100 700
- - -
m. 20 20
mm. 1/2” gas 1” gas
Kw. 0,18 0,37
L x P x H 410x250 450x340mm. 220H. 255H.
Kg. 14,70 22
RPE 70 RPE 150 RPE 250 RPE 1 RPE 7
Giri/min Giri/min
Port
ata
Hl/h
Port
ata
LT./
h
RPE 250
ELETTROPOMPE PERISTALTICHE
RPE 1
RPE 7
TramoggiaTrémie
ÉLECTROPOMPES PERISTALTIQUES PERISTALTIC ELECTROPUMPS