Upload
lacey-joyce
View
215
Download
1
Tags:
Embed Size (px)
Citation preview
•Is a white cement based – “texture finish material for
plastered surfaces”.
•Is in dry powdered form, and only water is mixed
with it before use.
•Is available for three kind of finishes, namely,
Trowel Finish (TF), Roller/Spray Finish (RF).
•Is available in 25 Kg. PP laminated bags.
WHY TEXTURA?
Decorates & protects both interiors & exteriors
Available in wide range of colors, textures & designs
Can be applied on damp walls
Extra adhesive strength unlike other acrylic finishes
Needs no curing
Birla White CementBirla White Cement
Quartz Sand. Quartz Sand.
Inert Mineral Fillers.Inert Mineral Fillers.
Chemical Additive.Chemical Additive.
Being white cement based, it offers a range of benefits, such as
Durable/ permanent finish.
Better adhesiveness, once applied on mortar/ plastered
surface it becomes a part of the surface.
Covers the fine cracks and other minor defects of the
plastered surface.
Has sufficient breath-ability, to breathe out the entrapped
moisture.
SALIENT FEATURES OF TEXTURA
SALIENT FEATURES OF TEXTURA
•Ideal for decoration and protection of Exterior and Interior Walls.
•Relatively economical than acrylic based material.
•Can be applied on moist and damp walls.
•Each finish (Trowel/ Roller/ Spray) offers a variety of textures and
designs.
•The inert mineral filler, white cement and chemical additives make it
water resistant.
SALIENT FEATURES OF TEXTURA
•The eco-friendly materials/ chemicals used in Textura makes it
suitable for all weather conditions.
•Textura is designed to make the finish resistant to microbial
growth.
•There is no health hazard or environmental impact during its
application, therefore, Textura is safe to use.
Roller / Spray Finish
1. Physical state Ready to use Powder Form
2 Pot life 2 hours (approx.)
3 Surface hardness 3 to 4 N
4 Max. thickness 2.5 mm
5 Coverage 6-8 sq. ft. per Kg .-Roller finish
8-10 sq. ft. per kg. -Spray finish
(Depends on Surface)
6 Drying time 2-3 hours, may vary due to change in temperature and humidity
Trowel Finish
1. Physical state Ready to use dry powder form.
2 Pot life 2 hours (approx.)
3 Surface hardness 3 to 3.5 N
4 Max. thickness 3 mm
5 Coverage 4 to 5 sq. ft. per Kg. (Depends on surface)
6 Drying time 2-3 hours, may vary due to change in temperature and humidity
TEXTURATEXTURA ACRYLIC TEXTURESACRYLIC TEXTURES
Water Resistant. Not Water Resistant.
Cement Based – more adhesive strength.
Less Adhesive strength.
Can be applied on moist and damp surfaces.
Only on dry surfaces.
Economical. Relatively Costly.
The surface (wall) should be in line & level.
Use the material within two hours of adding
water.
The roller/spray-gun/ trowel should be cleaned
properly after use.
Keep the dry mix material in dry place and out of
reach of children.
To get water repellant and non-sticky surface,
apply a good quality water-soluble silicone, on
the dry textured surface.