Upload
gaurav-mahal
View
214
Download
0
Embed Size (px)
Citation preview
8/17/2019 Ise Authentication Step Roorkee
1/6
1
Step 1: Go to Start and type run in search
Step 2: Type services.msc in run command and then enter and go to standard button
8/17/2019 Ise Authentication Step Roorkee
2/6
2
Step 3: In standard button start the wired auto config services it should be automatic.
Step 4: Go to Control Panel and then go to Network and sharing centre and Click change adapter
setting
8/17/2019 Ise Authentication Step Roorkee
3/6
3
Step 5:In change adapter setting Right Click to Local Area Connection and then go to property and
then go to Authentication tab
Step 6: In authentication tab enable(check) IEEE 802.1X authentication
8/17/2019 Ise Authentication Step Roorkee
4/6
4
Step:7 After Enable IEEE 802.1X authentication go to setting tab
Step:8 In setting tab uncheck validate server certificate
8/17/2019 Ise Authentication Step Roorkee
5/6
5
Step 9 After that go to configure tab and then uncheck Automatically use my window logon
Step 10: then go to additional setting tab
8/17/2019 Ise Authentication Step Roorkee
6/6
6
Step 11: In additional setting tab specify authentication mode as user authentication
Step 12: then go to replace credential and type username(email id username) and password and
then press OK. Default password is Pass123