June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 1

ISGMA 2017

PLENARY SESSION

PL01 Energy-conscious Green Manufact uring by Light Weight Technology with Flexibility / 3Dong-Yol Yang(GIST/KAIST, Korea)

PL02 Industry 4.0: Past - Present - Future / 4Branco Katalinić(Vienna University of Technology, Austria)

KEYNOTE SESSION

KS01 Spray Deposition Technology and Equipment of 3D Printing for Low Melting Point Metal / 7Zhongde Shan(China Academy of Machinery Science & Technology, China)

KS02 A Study on the Thermally Assisted Hybrid Machining / 8Choon-Man Lee(Changwon University, Korea)

KS03 Elliptical Vibration Cutting - From Its Proposal to Recent Developments - / 9Eiji Shamoto(Nagoya University, Japan)

KS04 Controlling Micro-Scale Water Transport in PEM Fuel Cells / 10Takemi Chikahisa(Hokkaido University, Japan)

KS05 Sustainable Printing of Nano and Microscale Sensors and Electronics / 11Ahmed A. Busanina(Northeastern University, USA)

KS06 Design of Wide Spectral Range Multiphoton Laser Scanning Microscopy System / 12Young-Sik Kim(University of Arizona, USA)

KS07 Measurement Technologies for Precision Manufacturing of Large-area Microoptics / 13Wei Gao(Tohoku University, Japan)

KS08 Modular Robotic Platforms: Innovation, Design, and Case Studies from Service Robotics to Industrial Applications / 14Jongwon Kim(Seoul Nat'l. University, Korea)

INVITED SESSION

IN01 Damping-Induced Self-Recovery Phenomenon of Mechanical Systems / 17Soo Jeon(University of Waterloo, Canada)

IN02 Chatter Detection Method by using Observer - based Phase Shift Monitoring / 18Yasuhiro Kakinuma(Keio University, Japan)

IN03 Direct Laser Writing of Flexible/Stretchable Electronics using Femtosecond Laser Pulses / 19Young-Jin Kim(Nanyang Technological University, Singapore)

IN04 Numerical Analysis of Dynamic Characteristics of Wet Friction Temperature Fields / 20Le Li(Beijing Information Science & Technology University, China)

ISGMA 2017

2 International Symposium on Green Manufacturing and Applications

IN05 Enabling Lighter Vehicle Structures / 21Nan Li(Imperial College London, UK)

IN06 Development of Ultraprecision Processing and Inspection System for the Freeform Optical Devices and & Modules / 22I Jong Kim(Korea Basic Science Institute, Korea)

IN07 Soft Artificial Skin Sensors and Muscle Actuators for Future Soft Robots / 23Yong-Lae Park(Seoul Nat'l. University, Korea)

IN08 Influence Factors of Non-Uniform Phase Transformation in Hot Stamping Process of Ultra-High-Strength Steel Sheet / 24Guozheng Quan(Chongqing University, China)

IN09 Wafer-Scale Hyperlens for High-Throughput Biological Imaging / 25Junsuk Rho(Pohang University of Science and Technology, Korea)

ORAL SESSION

OP001 Application status and development trend of binder jetting technology in foundry industry / 29Guangkuo Ao(Shenyang Research Institute of Foundry), Jiahui Zhu(Shenyang Research Institute of Foundry), Ying Gao(Shenyang Research Institute of Foundry), Wei Ding(Shenyang Research Institute of Foundry)

OP002 Micro 3D Printing of Stimuli-Responsive Soft Materials / 30Daehoon Han(Rutgers University), Chen Yang(Rutgers University), Howon Lee(Rutgers University)

OP003 3D Printing of Stretchable Tactile Sensors and Treads Using Recycled Tire Rubber for Health Monitoring of Tires / 31Md. Omar Faruk Emon(The University of Akron), Faez Alkadi(The University of Akron), Jeongwoo Lee(The University of Akron), Jae-Won Choi(The University of Akron)

OP004 Inkjet Printing of Graphene/Titanium Dioxide (TiO2) Photo-Electrodes for Dye-Sensitized Solar Cells (DSSCs) / 32Chin-Tai Chen(National Kaohsiung University of Applied Sciences), Kuan-Chen Liu(National Kaohsiung University of Applied Sciences)

OP005 Periodic reduced graphene oxide patterning using femtosecond laser direct writing for optically tunable long period fiber grating / 33Hyub Lee(Nanyang Technological University), Mun Ji Low(Nanyang Technological University), Chin Huat Joel Lim(Nanyang Technological University), Vadakke Matham Murukeshan(Nanyang Technological University), Young-Jin Kim(Nanyang Technological University)

OP006 Light Control for Aligning Micro Patterns on Transparent Film in Roll-to-Roll Printing Process / 34HyungTae Kim(Korea Institute of Industrial Technology), Yoon Jae Moon(Korea Institute of Industrial Technology), Heuiseok Kang(Korea Institute of Industrial Technology), Jun Young Hwang(Korea Institute of Industrial Technology), SeungTaek Kim(Korea Institute of Industrial Technology)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 3

ISGMA 2017

OP007 Effects of Experimental Conditions on the Plasma Pressure Measured by Photonic Doppler Velocimetry during Laser Shock Peening / 35Inkyu Yeo(Gwangju Institute of Science and Technology), Sungho Jeong(Gwangju Institute of Science and Technology), Janghee Choi(Gwangju Institute of Science and Technology), Inseok Jang(Gwangju Institute of Science and Technology)

OP008 Fast Compositional Mapping of Solar Cell by Laser Spectroscopy Technique for Process Monitoring during Manufacturing / 36Seok-Hee Lee(LG Electronics Inc.), Jung-Hwan In(Korea Photonics Technology Institute), Jang-Hee Choi(Gwangju Institute of Science and Technology), Seongho Jeong(Gwangju Institute of Science and Technology)

OP009 A study on the smart mod for the improvement of cooling efficiency and quality consistency / 37Hong-Seok Park(University of Ulsan), Xuan-Phuong Dang(Nha Trang University)

OP010 Friction stir spot welding of ultra-high strength steel / 38Hrishikesh Das(University of Ulsan), Mounarik Mondal(University of Ulsan), Sung-Tae Hong(University of Ulsan), Yeongseok Lim(Chonbuk National University), Kwang-jin Lee(Korea Institute of Industrial Technology)

OP011 Intermetallic evolution of Al-Si coated hot stamping steel during electrically assisted rapid heating / 39Thi Kieu Anh Dinh(University of Ulsan), Sung-Tae Hong(University of Ulsan), Heung-Nam Han(Seoul National University), Moon-Jo Kim(Korea Institute of Industrial Technology)

OP012 Comparative Study of Electrically Assisted Brazing and Induction Brazing of Ferritic Stainless Steel using Nickel Based Filler Metal / 40Viet Tien Luu(University of Ulsan), In-Hye Kim(University of Ulsan), Sung-Tae Hong(University of Ulsan), Hyun-Min Sung(Seoul National University), Heung Nam Han(Seoul National University)

OP013 Development of CNF/ Flame-resistant Magnesium Alloy Composites by Stir Casting / 41Gen Sasaki(Hiroshima University), Youqiang Yao(Hiroshima University), Kenjiro Sugio(Hiroshima University), Yongbum Choi(Hiroshima University)

OP014 Evaluation of Microstructures of Al-Si Casting Alloy by Using Image Mean Free Path / 42Kenjiro Sugio(Hiroshima University), Gen Sasaki(Hiroshima University), Junji Tabata(Hiroshima Aluminum Industry CO., LTD.), Nobuyuki Fuyama(Hiroshima Prefectural Technology Research Institute)

OP015 Microstructual Characterization of Al-MWCNT-Fe2O3 Hybrid Metal Matrix Composites / 43Vijay Santhiyagu Joseph(Jeonju University), Alexandre Tugirumubano(Jeonju University), Sun-Ho Go(Jeonju University), Jeong-Jin Lee(Jeonju University), Hyo-In Yoon(Jeonju University), Lee-Ku Kwac(Jeonju University), Hong-Gun Kim(Jeonju University)

OP016 A Study on the Aging Characteristics of the Tire Sidewall Rubber / 44Byungwoo Moon(Sungkyunkwan University), Chang-Sung Seok(Sungkyunkwan University), Jae-Mean Koo(Sungkyunkwan University), Namgyu Jun(Sungkyunkwan University), Jongmin Lee(Sungkyunkwan University), Ui Seok Hong(Hyundai Motor Group), Min Kyeong Oh(Hyundai Motor Group)

ISGMA 2017

4 International Symposium on Green Manufacturing and Applications

OP017 Structure Control of VGCF/Aluminum Metal Matrix Composite / 45Erlangga Hanggara(Hiroshima University), Kenjiro Sugio(Hiroshima University), Gen Sasaki(Hiroshima University), Yongbum Choi(Hiroshima University), Kazuiro Matsugi(Hiroshima University)

OP018 Design of a Three-dimensional Metal Printing System with a Volumetric Nozzle and Fabrication of Conductive Fine Patterns / 46Yeongjun Kim(Hanyang University), Shin Jang(Hanyang University), Chang Woo Lee(Korea Institute of Machinery and Materials), Junhee Lee(Korea Institute of Machinery and Materials), Je Hoon Oh(Hanyang University)

OP019 Metal Fused Deposition Modeling with IR Based Close-Loop Control System / 47Yi-Hung Chen(National Tsing Hua University), Hung-Yin Tsai(National Tsing Hua University)

OP020 Design and Experimental Study of a novel Metal 3D Printing Device / 48Congze Fan(Tsinghua University), Zhongde Shan(China Academy of Machinery Science and Technology), Wenjuan Rong(China Academy of Machinery Science and Technology), Lining Yang(China Academy of Machinery Science and Technology), Shuo Yang(China Academy of Machinery Science and Technology)

OP021 Fabrication of microfluidic structure based biosensor using roll-to-roll gravure printing / 49Sunglim Ko(Konkuk University)

OP022 Gap control system between a large-area mask and substrate for line-beam scan lithography / 50ChangKyu Lee(Hanyang University), Da Yeon Lee(Hanyang University), Sang-Gil Ryu(Philoptics Co.,Ltd.), Je Hoon Oh(Hanyang University)

OP023 Flash light sintering of Cu nano/micro ink for warpage-free Cu electrode with high conductivity by substrate vacuum heating / 51Chung-hyeon Ryu(Hanyang University), Sung-Jun Joo(Hanyang University), Hak-Sung Kim(Hanyang University)

OP024 Fabrication of Seamless Roll Mold Using Visually Tolerable Tiling Method / 52Jihoon Lee(Kyungpook National University), Moon Kyu Kwak(Kyungpook National University)

OP025 OPTIMIZATION OF 3D BRAIDED T-BEAM STRUCTURE DESIGN PARAMETERS FOR MINIMIZATION OF DELAMINATION / 53Dong-Woo Lee(Changwon National University), Byung-Jin Park(Changwon National University), Jung-Il Song(Changwon National University)

OP026 Thermal Comparison of Conventional and Conformal Cooling Channel Designs for a Non-Constant Thickness Screw Cap / 54Eric Dimla(Universiti Teknologi Brunei), Josep Rull-Trinidad(IQS, Universitat Ramón Llull), Guillermo Reyes(IQS, Universitat Ramón Llull), Andres Amador Garcia-Granada(IQS, Universitat Ramón Llull)

OP027 The hardening depth of a sprocket by the induction hardening analysis using co-simulation and comparison with the experiment results / 55Jinkyu Choi(Gyeongsang National University), Seoksoon Lee(Gyeongsang National University), Seungmin Tak(Gyeongbuk Hybrid Technology Institute), Inseok Pack(Gyeongsang National University), Hanbin Kang(Gyeongsang National University), Inyoung Lee(Gyeongsang National University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 5

ISGMA 2017

OP028 Continuity-Preserving Tool Path Optimization in 5-Axis Flank CNC Machining for Reducing Machining Errors / 56Hsiang-Yun Chen(National Tsing Hua University), Chih-Hsing Chu(National Tsing Hua University)

OP029 Shape Memory Alloy Wire Bundles for the Easy Scaling of Force and Stroke Length / 57Jongho Kim(Sungkyunkwan University), Ji-Hyeong Lee(Sungkyunkwan University), Dong-June Heo(Sungkyunkwan University), Haneol Lee(Sungkyunkwan University), Hugo Rodrigue(Sungkyunkwan University)

OP030 Reducing ice adhesion strength of aluminum using surface patterning / 58Jaehyeon Jeon(Hanyang University), Dong Rip Kim(Hanyang University)

OP031 Heat sealed Film-based Inflatable Soft Pneumatic Bending Actuator / 59JuCheol Jung(Sungkyunkwan University), Hugo Rodrigue(Sungkyunkwan University)

OP032 Experimental study for the prevention of push tappet bounce / 60Byeung-Cheol An(Korea University of Science and Technology), Young-Bog Ham(Korea Institute of Machinery and Materials), Gi-Tae Lee(Korea Institute of Machinery and Materials), Jong-Dae Kim(Korea Institute of Machinery and Materials), Gooy-Nam Shin(Korea Institute of Machinery and Materials), So-Nam Yun(Korea Institute of Machinery and Materials), Jung-Ho Park(Korea Institute of Machinery and Materials)

OP033 Dielectric Planarization on Package Substrate using Non-Spherical Colloidal Silica Slurry / 61Seonho Jeong(Pusan National University), Dasol Lee(Pusan National University), Jongwoo Lee(Pusan National University), Haedo Jeong(Pusan National University)

OP034 Identification of the system circuit parameters in the electromagnetic forming process / 62Hyeonil Park(Korea Institute of Materials Science), Daeyong Kim(Korea Institute of Materials Science), Jinwoo Lee(Korea Institute of Materials Science), Se-Jong Kim(Korea Institute of Materials Science), Youngseon Lee(Korea Institute of Materials Science)

OP035 Study on die design with direct cooling to improve strength at the side area of product in hot stamping / 63Seunghoon Cha(Gyeongbukttechnopark), Joonghui Kim(Gyeongbukttechnopark), Bumsik So(Gyeongbukttechnopark), Byungmin Kim(Pusan National University), Daecheol Ko(Pusan National University)

OP036 Suppression of Machining Vibration and Tool Breakage Using High Damping Alloy Collet / 64Minsu Kim(Gwangju Institute of Science and Technology), Sun-Kyu Lee(Gwangju Institute of Science and Technology), Jongjae Kim(Gwangju Institute of Science and Technology)

OP037 The Analytical Approximation of Temperature Distributions Induced by a Large Pulsed Electron Beam Corresponding to Unique Absorption of Accelerated Electrons / 65Jisoo Kim(Ulsan National Institute of Science and Technology), Hyung Wook Park(Ulsan National Institute of Science and Technology)

OP038 Mode shape and vibration experiments for a 1-axis stage / 66Wooyeong Jang(Kookmin University), Jayil Jeong(Kookmin University), Younggeul Park(Kookmin University), Myoungyeon Park(Kookmin University), Jinseok Kim(Korea Institute of Industrial Technology), Heonjong Choi(Korea Institute of Industrial Technology), Eungoo Kang(Korea Institute of Industrial Technology)

ISGMA 2017

6 International Symposium on Green Manufacturing and Applications

OP039 Laser-induced growth sintering and its applications to one glass touch solution / 67Bongchul Kang(Kumoh National Institute of Technology), Seokwoo Son(Korea Advanced Institute of Science and Technology), Jong Eun Park(Korea Advanced Institute of Science and Technology), Minyang Yang(Korea Advanced Institute of Science and Technology)

OP040 Photoreduction of graphene oxides using a femtosecond laser direct writing method / 68Hyub Lee(Nanyang Technological University), Chin Huat Joel Lim(Nanyang Technological University), Mun Ji Low(Nanyang Technological University), Vadakke Matham Murukeshan(Nanyang Technological University), Young-Jin Kim(Nanyang Technological University)

OP041 Graphene Oxide Blended in Cellulose Nanocrystal Composite for Humidity Sensor / 69Abdullahil Kafy(Inha University), Hyun Chan Kim(Inha University), MD Imrul Reza Shishir(Inha University), Jin Mo Kang(Inha University), Jaehwan Kim(Inha University)

OP042 Fully Flexible Haptic Actuator based on Eco-friendly PVC Plastisol / 70Won-Hyeong Park(Korea University of Technology and Education), Eun-Jae Shin(Korea University of Technology and Education), Sang-Youn Kim(Korea University of Technology and Education)

OP043 Graphene-CNT-Ni Nanostructures-based High-Performance Ionic Artificial Muscles / 71Jaehwan Kim(Korea Advanced Institute of Science and Technology), Il-Kwon Oh(Korea Advanced Institute of Science and Technology)

OP044 Multi-layer dielectric elastomer actuator with modulus-gradient for flexible tactile interface / 72Seongcheol Mun(Electronics and Telecommunications Research Institute), Sungryul Yun(Electronics and Telecommunications Research Institute), Ki-Uk Kyung(Electronics and Telecommunications Research Institute)

OP045 Application of TRIZ to the Development of Effective Protector Pads / 73Chulho Yang(Oklahoma State University), Junyoung Park(Kumoh National Institute of Technology), Dongchan Lee(FRTechnology), Young Chang(Oklahoma State University)

OP046 Study of wettability of laser-ablated metallic surfaces under low-temperature annealing / 74Chi-Vinh Ngo(University of Ulsan), Doo-Man Chun(University of Ulsan)

OP047 An Eco Friendly Novel Metal Matrix Nano Composite Friction Surfacing of Titanium Alloy / 75ESTHER ISSAC(Coimbatore Institution of Technology), MURUGAN NATARAJAN(COIMBATORE INSTITUTE OF TECHNOLOGY), AMOS JAYARAJ(MAHENDRA INSTITUTE OF TECHNOLOGY), Vijay Santhiyagu Joseph(Jeonju University)

OP048 Experimental study of pre-shearing cropping process of steel bars / 76Chengliang Hu(Shanghai Jiaotong University), Lunqiang Chen(Shanghai Jiaotong University), Zhen Zhao(Shanghai Jiaotong University), Jiwei Li(Shanghai Jiaotong University), Zhongming Li(Ningbo SiJin Machinery Co. Ltd)

OP049 Study on the cast process of large size spherical titanium alloy parts of ships / 77Ping Yan(Shenyang Research Institute of Foundry), Yafei Ren(Shenyang Research Institute of Foundry), Youwei Zhang(Shenyang Research Institute of Foundry), Shibing Liu(Shenyang Research Institute of Foundry), Jun Zhao(Shenyang Research Institute of Foundry)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 7

ISGMA 2017

OP050 Study on Investment Casting Mold of TiAl Alloy / 78Youwei Zhang(shenyang research institute of foundry), Chunling Bao(shenyang research institute of foundry), Zhiyong Zhang(shenyang research institute of foundry), Shibing Liu(shenyang research institute of foundry), Jun Zhao(shenyang research institute of foundry)

OP051 Experimental Investigation on the Flow Properties of Sand Granules in the Process of Sand Mold Printing / 79Zhi Guo(China Academy of Machinery Science & Technology, Tsinghua University), Zhongde Shan(China Academy of Machinery Science & Technology), Dong Du(Tsinghua University), Mengmeng Zhao(China Academy of Machinery Science & Technology), Milan Zhang(China Academy of Machinery Science & Technology)

OP052 Effect of Composite Casting Process and Molding Materials on the Performance and Precision of Iron Castings / 80Limin LIU(China Academy of Machinery Science and Technology), Zhongde SHAN(China Academy of Machinery Science and Technology), Dun LAN(China Academy of Machinery Science and Technology), Feng LIU(China Academy of Machinery Science and Technology)

OP053 Research on Method for Near-net Forming of Sand Mold with Digital Flexible Extrusion Technology / 81Shuai ZHANG(China Academy of Machinery Science and Technology), Zhongde SHAN(China Academy of Machinery Science and Technology), Zhaoxian GU(China Academy of Machinery Science and Technology)

OP054 Modal Surface Reconstruction for High Resolution Freeform Deflectometry / 82Maham Aftab(University of Arizona), Logan Graves(University of Arizona), Dae Wook Kim(University of Arizona)

OP055 High-speed figure inspection of an off-axis aspheric mirror based on the phase-measuring deflectometry / 83Sangwon Hyun(Korea Basic Science Institute), I-Jong Kim(Korea Basic Science Institute), Seung-Hyun Kim(Korea Basic Science Institute), Byeong-Joon Jeong(Korea Basic Science Institute), Min-Woo Jeon(Korea Basic Science Institute), Geon-Hee Kim(Korea Basic Science Institute)

OP056 Design of Vibration Assisted Polishing System for Silicon Carbide / 84Mincheol Kim(Seoul National University), Dong-Ryul Kim(Seoul National University), Thomas J. Y. Kim(Seoul National University), Dong-Hyeon Kim(Seoul National University), Won-Shik Chu(Seoul National University), Sung-Hoon Ahn(Seoul National University)

OP057 Development of a novel ECMP process with ionized slurry supply system / 85Dasol Lee(Pusan National University), Haedo Jeong(Pusan National University), Hyunseop Lee(Tongmyong University), Seonho Jeong(Pusan National University), Jongwoo Lee(Pusan National University)

OP058 Effect of the consolidation temperature on the mechanical properties of self-reinforced polypropylene composites / 86Do Hyoung Kim(Hanyang University), Yeon-Taek Hwang(Hanyang University), So-Young Kang(Hanyang University), Hak-Sung Kim(Hanyang University)

OP059 Non-destructive evaluation of the weld line in injection molding using terahertz time-domain spectroscopy / 87Gyung-Hwan Oh(Hanyang University), Ji-Hye Jeong(Coway Co. Ltd), Sung-hyeon Park(Hanyang University), Hak-sung Kim(Hanyang University)

ISGMA 2017

8 International Symposium on Green Manufacturing and Applications

OP060 Study on optical characterization and manufacture of micro random pattern using indentation machining / 88Je-Ryung Lee(Korea Institute of Machinery and Materials), Hwi Kim(Korea University), Seung Hwan Moon(Korea Institute of Machinery and Materials), Tae-Jin Je(Korea Institute of Machinery and Materials), Doo-Sun Choi(Korea Institute of Machinery and Materials), Jee-Hong Min(LMS), Young-Il Kim(LMS), Eun-chae Jeon(Korea Institute of Machinery and Materials)

OP061 Control of Thin Film Porosity in Nano Particle Deposition System using Novel Laser Sintering Process / 89Ji-Hyeon Song(Seoul National University), Hyun-Taek Lee(Seoul National University), Min-Soo Kim(Seoul National University), Yan Wang(Georgia Institute of Technology), Sung-Hoon Ahn(Seoul National University)

OP062 Radial Basis Functional Model of Multi-point Dieless Forming Process for Springback Reduction and Compensation / 90Misganaw Abebe Baye(Pusan National University), Ji-Woo Park(Pusan National University), Jeong Kim(Pusan National University), Beom-Soo Kang(Pusan National University)

OP063 Experimental evaluation of ductile fracture criterion under strain path change / 91Chanyang Kim(Korea University), Wooram Noh(Korea University), Junghan Song(Korea Institute of Industrial Technology), Myoung-Gyu Lee(Korea University)

OP064 Optimal Design in Electric Upsetting Parameters of Heat-resistant Alloy to Achieve Grain Refinement and Uniform Distribution / 92Le Zhang(Chongqing University), Chao An(Chongqing University), Zhen-yu Zou(Chongqing University), Jia Pan(Chongqing University), Guo-zheng Quan(Chongqing University)

OP065 Structural lay-up optimization of CFRP B-pillar reinforcement / 93Byeong-Jin Min(Pusan National University), Jeong-Min Lee(Pusan National University), Byung-Min Kim(Pusan National University), Yong-Sik Kim(Hwashin tech), Dae-Cheol Ko(Pusan National University)

OP066 Fault detection for bearing defect using Learned classifier / 94Byeonghui Park(Changwon National University), Changwoo Lee(Changwon National University)

OP067 THERMAL SENSOR LOCATION OPTIMIZATION FOR MACHINE ERROR COMPENSATION / 95Zhengchun Du(Shanghai Jiao Tong University), Hongfu Hou(Shanghai Jiao Tong University), Jianguo Yang(Shanghai Jiao Tong University)

OP068 System identification of an air-bearing linear motor motion stage with passive RFC (reaction force compensation) / 96Kim-Duc Hoang(Soongsil University), Hyeong-Joon AHN(Soongsil University)

OP069 Development and Improvement Effect of Hydraulic Tube Expansion Machine in APR1400 RVI / 97Myung Hyun Kim(Changwon National University), Seung Hang Shin(Changwon National University), Yoon Gyo Jung(Changwon National University), Jong Hyoung Kim(Korea Institute of Industrial Technology), Si Geun Choi(Kyungpook National University), Young Tae Cho(Changwon National University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 9

ISGMA 2017

OP070 Design of ultra precision processed off-axis TMA based freeform optical system / 98KIBEOM AHN(Korea Institute of Ocean Science and Technology), Seongick CHO(Korea Institute of Ocean Science and Technology), Eunsong OH(Korea Institute of Ocean Science and Technology), Seon-yeong Jeong(Korea Institute of Ocean Science and Technology), Young Je Park(Korea Institute of Ocean Science and Technology)

OP071 Study on Plasma Assisted SiC machining Technology / 99Yong Sup CHOI(National Fusion Research Institute), Kang IL Lee(National Fusion Research Institute), Dong Chan Seok(National Fusion Research Institute), Seung Ryul You(National Fusion Research Institute)

OP072 Dry Etching of Sintered SiC by Atmospheric Pressure Plasma Jet / 100Dong Chan Seok(National Fusion Research Institute), Seungryul Yoo(National Fusion Research Institute), Yong Ho Jung(National Fusion Research Institute)

OP073 Freeform surface measurement using low coherence interferometry / 101Kye-Sung Lee(Korea Basic Science Institute), Minwoo Jeon(Korea Basic Science Institute), Byeong Joon Jeong(Korea Basic Science Institute), Hyunseok Bang(Korea Basic Science Institute), Injoo Yeo(Korea Basic Science Institute), Ki Soo Chang(Korea Basic Science Institute), Dong Uk Kim(Korea Basic Science Institute), Jiyong Bae(Korea Basic Science Institute), Kihwan Nam(Korea Basic Science Institute), Hyun Huh(Korea Basic Science Institute), Deokhee Kang(Korea Basic Science Institute), Geonhee Kim(Korea Basic Science Institute)

OP074 Far-field plasmonic lens for a microscopy / 102Seunghyun KIM(Korea Basic Science Institute), IJong KIM(Korea Basic Science Institute), Sangwon Hyun(Korea Basic Science Institute), Geonhee KIM(Korea Basic Science Institute)

OP075 The study of integration of robust design and green design into product development / 103Tsai Chi Kuo(Chung Yuan Christian University), Sora Wang(Chung Yuan Christian University)

OP076 Development of Multisupport Gantry system for Robot used with AWJ / 104VIMALESH ANNADURAI(Pusan National University), JUNG HWAN AHN(Pusan National University)

OP077 Development of Target Robot Platform for Vehicle Accident Reproduce / 105Yeonggeol Park(Kookmin University), Myoungyeon Park(Kookmin University), Wooyoung Jang(Kookmin University), Jayil Jeong(Kookmin University)

OP078 Tensile Deformation of Laser Welded Dual-Phase Steel Sheets / 106Yong Chan Hur(Pusan National University), Ji Hoon Kim(Pusan National University), Jaebong Jung(Pusan National University), Byung Min Kim(Pusan National University), Daeyong Kim(Korea Institute of Materials Science), Myoung-Gyu Lee(Korea University), Chung Yun Kang(Pusan National University)

OP079 Wear Calculation Model Considering the Effect of Porosity and Wear Properties of Vehicle Wet Shifting Clutch Friction Disc / 107Le Li(Beijing Information Science and Technology University), Xi Chen(Beijing Information Science and Technology University), Liyong Wang(Beijing Information Science and Technology University)

OP080 Numerical Prediction of Flow Stress on Fiber Metal Laminates using Artificial Neural Network / 108Eu-Tteum Park(Pusan National University), Jeong Kim(Pusan National University), Beom-Soo Kang(Pusan National University), Woo-Jin Song(Pusan National University)

ISGMA 2017

10 International Symposium on Green Manufacturing and Applications

OP081 A simplified finite element method for prediction of longitudinal curvature in flexibly-reconfigurable roll forming process / 109Hadi Ghiabakloo(Pusan National University), Jeong Kim(Pusan National University), Beom-Soo Kang(Pusan National University)

OP082 Effect of drawing force reduction on shape drawing process through two dies in tandem / 110Jeong Hun Kim(Pusan National University), Dae Cheol Ko(Pusan National University), Byung Mim Kim(Pusan National University)

OP083 Inverse Identification of Flow Stress Behavior in Laser Welded Dual Phase Steels / 111Jae-Min Lee(Korea University), Wooram Noh(Korea University), Ji Hoon Kim(Pusan National University), Myoung-Gyu Lee(Korea University)

OP084 Fabrication of (Li/Na)2CO3 electrolyte impregnated components for molten carbonate fuel cells / 112Chang-Whan LEE(Seoul National University of Science and Technology), Sung-Joo LEE(Seoul National University of Science and Technology), Mihui LEE(Korea Institute of Science and Technology), Min-Goo KANG(Korea Institute of Science and Technology), Hyung-Chul HAM(Korea Institute of Science and Technology), Sung-Pil YOON(Korea Institute of Science and Technology)

OP085 Enhanced thermal stability of metal electrode on ridge-valley nanostructured SDC interlayer for low-temperature solid oxide fuel cell / 113Hyong June Kim(Seoul National University of Science and Technology), Jihwan An(Seoul National University of Science and Technology)

OP086 Analysis of current collecting layer with lattice structure on large area cathode for thin film solid oxide fuel cell based on simulation / 114Yusung Kim(Seoul National University), Suk Won Cha(Seoul National University), Yeageun Lee(Seoul National University), Wonjong Yu(Seoul National University), Sanghoon Lee(Seoul National University), Chunhua Zheng(Chinese Academy of Sciences)

OP087 Enhancing Thermal-Stability of Metal Electrodes with a Sputtered Gadolinia-Doped Ceria Over-Layer for Low-Temperature Solid Oxide Fuel Cells / 115Seongkook Oh(Seoul National University of Science and Technology), Jihwan An(Seoul National University of Science and Technology), Soonwook Hong(Hanyang University), Hyongjune Kim(Seoul National University of Science and Technology), Young-Beom Kim(Hanyang University)

OP088 A Bio Inspired Control Strategy for An Electromechanical Braking System / 116Changwon Kim(Korea Institute of Machinery and Materials), Joonho Seo(Korea Institute of Machinery and Materials), Ohwon Kwon(Korea Institute of Machinery and Materials), Dongkyu Lee(Korea Institute of Machinery and Materials)

OP089 Modeling and Simulation of Launch and Recovery System for a Tow-fish in Consideration of Sea State / 117Jin-Il Kang(Korea Maritime and Ocean University), Sung-Won Jo(Korea Maritime and Ocean University), Joo-No Sur(Korea Maritime and Ocean University), Hyeung-Sik Choi(Korea Maritime and Ocean University), Seo-Kang Kim(Korea Maritime and Ocean University)

OP090 Component Sizing for PHEV Powertrain with Gear Ratio Optimization / 118Changbeom Kang(Seoul National University), Changhee Song(Seoul National University), Donghwan Sung(Seoul National University), SukWon Cha(Seoul National University), Chunhua Zheng(Shenzhen Institutes of Advanced Technology)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 11

ISGMA 2017

OP091 Active Heave Compensation Control and Experiment for Offshore Crane / 119Ji-Youn Oh(Korea Maritime and Ocean University), Hyeung-Sik Choi(Korea Maritime and Ocean University), Sang-Ki Jeong(Korea Maritime and Ocean University), Seo-Kang Kim(Korea Maritime and Ocean University), Joon-Young Kim(Korea Maritime and Ocean University), Sang-Ki Lee(Tech Flower Co. Ltd.,)

OP092 Simple and precise LVDT-based in-situ bolt tension monitoring system for truck wheel nuts / 120Shin Jang(Hanyang University), Samgon Lee(Hanyang University), Moo Woong Choi(Hyundai Motor Company), Kwang Whi Na(Hyundai Motor Company), Je Hoon Oh(Hanyang University)

OP093 A machine-based power consumption model for machine tools / 121Hae-Sung Yoon(University of Wisconsin-Madison), Eshank Singh(University of Wisconsin-Madison), Sangkee Min(University of Wisconsin-Madison)

OP094 Single Breath Analysis Using Multi-Gas Sensors For Respiratory Diseases / 122Dongkyu Lee(Korea Institute of Machinery and Materials), Myunghwan Lee(Kyungpook National University), Ohwon Kwon(Korea Institute of Machinery and Materials), Kang-Ho Lee(Korea Institute of Machinery and Materials), Sinwon Kang(Kyungpook National University)

OP095 Prediction of potential rupture areas of cerebral aneurysms using computational fluid dynamics / 123Hyojae Jeon(Hanyang University), Ji Hun Choi(Hanyang University), Yong Bae Kim(Yonsei University, Gangnam Severance Hospital), Kwang-Chun Cho(Yonsei University, Gangnam Severance Hospital), Je Hoon Oh(Hanyang University)

OP096 Impact and Damage Monitoring Ability of Self-sensing Carbon-fiber-reinforced Plastic (CFRP) Structures / 124Hyung Doh Roh(Ulsan National Institute of Science and Technology), Young-Bin Park(Ulsan National Institute of Science and Technology)

OP097 Evaluation on Mechanical Characteristics and Changes in Microstructure of NCF 3015 Alloy according to High Temperature Degradation / 125JAEGU CHOI(Sungkyunkwan University), CHANGSUNG SEOK(Sungkyunkwan University), JAEMEAN KOO(Sungkyunkwan University), SOO PARK(Sungkyunkwan University), SUKWOO HONG(Sungkyunkwan University), DUKHYUN NAM(Hyundai-Kia Motors Company), GAYEON KIM(Hyundai-Kia Motors Company)

OP098 Rational fabrication of Fe2O3 nanorods g-C3N4heterostructures via thermal evaporation for water splitting application / 126Suhee Kang(Hanyang University), Rajendra Charandeo Pawar(Hanyang University), Joonyoung Jang(Hanyang University), Caroline Sunyong Lee(Hanyang University)

OP099 An Experimental Study on a Superhydrophobic Dry Patching Substrate using Polyimide / 127Syed Asad Ali Zaidi(Korea Institute of Machinery and Materials), Yongjin Kim(Korea Institute of Machinery and Materials), Joon Yub Song(Korea Institute of Machinery and Materials)

OP100 Polyethyleneimine Modified Carbon Cloth Anode for Self-Pumping Glucose Oxidase Fuel Cells / 128Jhang-Han Wang(National Chung Hsing University), Li-Zhen Huang(National Chung Hsing University), Hsiharng Yang(National Chung Hsing University)

ISGMA 2017

12 International Symposium on Green Manufacturing and Applications

OP101 EXPERIMENTAL ANALYSIS ON THE PERFORMANCE OF VANADIUM REDOX FLOW BATTERY BASED ON THE TAFEL CONSTANT AND EXCHANGE CURRENT DENSITY / 129Jungmyoung Kim(Changwon National University), Heesung Park(Changwon National University)

OP102 Microstructure control of NiO-based ion storage layer using various sized NiO particles to evaluate electrochromic performance / 130Dahyun Choi(Hanyang University), Minji Lee(Hanyang University), Hyungsub Kim(Hanyang University), Doo-Man Chun(University of Ulsan), Wonshik Chu(Seoul National University), Sung-Hoon Ahn(Seoul National University), Caroline Sunyong Lee(Hanyang University)

OP103 Electrochemical Performance of Supercapacitor Prepared by Dry Spray Coating / 131Mohaned Mohammed Mahmoud Mohammed(University of Ulsan), Mohammad Nur E Alam Al Nasim(University of Ulsan), Won-Shik Chu(Seoul National University), Caroline Sunyong Lee(Hanyang University), Doo-Man Chun(University of Ulsan)

OP104 Effect of Aging on Gas Tungsten Arc welded Nickel Based Superalloy Inconel 718 / 132Ravi G(Coimbatore Institution of Technology), Murugan N(Coimbatore Institution of Technology)

OP105 Study on an Attitude Reference System for Underwater Robot for Observation of Ocean Environments / 133Sang-Ki Jeong(Korea Maritime and Ocean University), Hyeung-Sik Choi(Korea Maritime and Ocean University), Dae-Hyeong Ji(Korea Maritime and Ocean University), DongWook Jung(Korea Maritime and Ocean University), Joon-Young Kim(Korea Maritime and Ocean University)

OP106 Cu2O/ZnO Nanorods Array Heterostructure Fabrication and their application for Photoelectrochemical water splitting / 134Sunil Babu Eadi(Kumoh National Institute of Technology), Sengeragchaa Bolortuya(Kumoh National Institute of Technology), Min Ji Hong(Kumoh National Institute of Technology), Sunghyun Park(Kumoh National Institute of Technology), Yong Sik Kim(Kumoh National Institute of Technology), Hee Jin Kim(Kumoh National Institute of Technology), Sungjin Kim(Kumoh National Institute of Technology)

OP107 Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device / 135Hongjin Jung(Nagoya University), Takehiro Hayasaka(Nagoya University), Eiji Shamoto(Nagoya University)

OP108 Tribological Behavior of Carbon Based Coatings Adapted to Lubricant-free Forming Conditions / 136Jennifer Tenner(Institute of Manufacturing Technology), Kolja Andreas(Institute of Manufacturing Technology), Rong Zhao(Institute of Engineering Design), Stephan Tremmel(Institute of Engineering Design), Tom Häfner(Institute of Photonic Technologies), Michael Schmidt(Institute of Photonic Technologies), Marion Merklein(Institute of Manufacturing Technology)

OP109 Tribological Performance of WS2 Composite Film / 137Shu-Sheng Xu(Yonsei University), Li-Jun Weng(Chinese Academy of Sciences), Dae-Eun Kim(Yonsei University)

OP110 Effect of Water Lubrication on Tribological Properties of Carbon Based Coating / 138Hye-Gyun Kim(Yonsei University), Jong-Kuk Kim(Korea Institute of Materials Science), Young-Jun Jang(Korea Institute of Materials Science), Dae-Eun Kim(Yonsei University)

OP111 Combine Remanufacturing and Purchasing Systems in a Reverse Logistics Environment / 139Yufang Chiu(Chung Yuan Christian University), Yingpei Lin(Chung Yuan Christian University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 13

ISGMA 2017

POSTER SESSION

PP001 Study on the Effects of Friction Force in Dynamic Analysis of Four - axis Machine Tool by the Lagrange Energy Method / 143Pham Van Dinh(Korea University of Science and Technology), Chan Hong Lee(Korea Institute of Machinery and Materials), Chang Kyu Song(Korea Institute of Machinery and Materials)

PP002 A study on the fabrication of slot-die coater using PDMS-glass / 144Seongyong Kim(Changwon National University), Changwoo Lee(Changwon National University)

PP003 A Study on the Tool Wear Experiment according to Cutting Tool Materials in Induction-Assisted Machining / 145Eunjung Kim(Changwon National University), Choon-Man Lee(Changwon National University)

PP004 A Study on the Stability Evaluation of an Whirling Machine for Ball Screw machining / 146In-Jae Lee(Changwon National University), Choon-Man Lee(Changwon National University), Sung-Ho Moon(Changwon National University), Young-Hun Lee(Changwon National University), Hyun-Ku Kim(TIC Ballscrew Co., Ltd)

PP005 A Study on the Development of a Test bench for performance evaluation of Ball screws / 147Jung Hoon Lee(Changwon National University), Choon-Man Lee(Changwon National University), Eun Jung Kim(Changwon National University), Hyunku Kim(TIC)

PP006 Noise and Vibration Measurements for a Ball screw / 148Min Jeong Kim(Changwon National University), Choon Man Lee(Changwon National University), Ga Bin Kim(Changwon National University)

PP007 An analytical Study on the Development of a Cold Forming Process for an Upper Seat Track of Vehicles using UHSS / 149Sang-Seok Seol(Changwon National University), Won-jung Oh(Changwon National University), Young-Ho Choi(Changwon National University), Jun-Hwan Kim(Changwon National University), Choon-Man Lee(Changwon National University)

PP008 A Study on High-Precision Feed Drive for Accurate Artificial Intelligence Machining Center / 150Sungki LYU(Gyeongsang National University), Zhezhu XU(Gyeongsang National University), Hyungyung Kim(Gyeongsang National University), Minhyung Jeon (Gyeongsang National University), Zin Zin(Gyeongsang National University)

PP009 A Study on the Structural analysis for the Gear module of an Whirling machine for Ball screws / 151Sung-Woo Shin(Changwon National University), Choon-Man Lee(Changwon National University), Eun-Jung Kim(Changwon National University), Sung-Ho Moon(Changwon National University), Hong-Man Moon(DUCK HEUNG CO., LTD)

PP010 A Study on the NC Code Generation Algorithm for Rotary Laser Module Control of Laser Assisted Machining / 152Won-Jung Oh(Changwon National University), Choon-Man Lee(Changwon National University)

PP011 Evaluation and development of overlay welding automation system for inside surface of small pipe / 153Young Cheol Jeong(Changwon National University), Young Tae Cho(Changwon National University), Yoon-Gyo Jung(Changwon National University)

ISGMA 2017

14 International Symposium on Green Manufacturing and Applications

PP012 Development of sap flow measurement system based on granier’s method / 154Jin Gi Shin(Changwon National University), Sang Eun Song(Changwon National University), Yoon- Gyo Jung(Changwon National University), Young Tae Cho(Changwon National University)

PP013 A Basic Study on the Development of a computerized program for Remanufacturing process of Vertical Machining Centers / 155Young-Hwa Roh(Changwon National University), Choon-Man Lee(Changwon National University), Wan-Sik Woo(Changwon National University), Jae-Hyeon Ha(Changwon National University), Dong-Gun Kim(INTECH CO., LTD.)

PP014 Comparison of anti-wear performance of TiN and WC/TiN Coating Prepared by Arc Ion Plating and magnetron sputtering / 156YUNKON JOO(Changwon National University), JEHYUN LEE(Changwon National University)

PP015 Solidification process and microstructure formation by temperature gradient in single crystal superalloy / 157Changhoon Sung(Changwon National University), Jehyun Lee(Changwon National University)

PP016 Controllable lateral thickness of water droplet by tension control in roll-to-roll systems / 158Dongguk Kim(Changwon National University), Changwoo Lee(Changwon National University)

PP017 Machining Process Optimization for Curvic Tooth of Gas Turbine Rotor / 159DukWon Hur(Changwon National University), Yoen Ho Jeong(Changwon National University), YoonGyo Jung(Changwon National University), Young Tae Cho(Changwon National University)

PP018 A Basic Study on the Machining Characteristics of Laser-Induction Assisted Milling by High-Speed Machining / 160Jae-Hyeon Ha(Changwon National University), Choon-Man Lee(Changwon National University), Yea-Jin Yang(Changwon National University), chimeg Khulan(Changwon National University)

PP019 A Study on the Effect of Residual Stress Formation by Seal Weld Repair in the Nuclear Power Plant CEDM Nozzle / 161Jong Ho Kang(Changwon National University), Hyun Min Choi(Changwon National University), Yoon Gyo Jung(Changwon National University), Young Tae Cho(Changwon National University)

PP020 Measurement of surface and thickness of optical parallel plate using wavelength tuning / 162YANGJIN KIM(Pusan National University), Naohiko Sugita(The University of Tokyo), Mamoru Mitsuishi(The University of Tokyo)

PP021 Optimization and Experimental study of Design parameters in Linear Motion Stages / 163Gyungho Khim(Korea Institute of Machinery and Materials), Sung-Hyun Jang(Korea Institute of Machinery and Materials), Chun-Hong Park(Korea Institute of Machinery and Materials)

PP022 Detachable electric button for smart fabrics / 164Kang-Ho Lee(Korea Institute of Machinery and Materials), Ju Young Cha(Korea Institute of Machinery and Materials), Dongkyu Lee(Korea Institute of Machinery and Materials), Ohwon Kwon(Korea Institute of Machinery and Materials), Yongkoo Lee(Korea Institute of Machinery and Materials)

PP023 Interim-check and Volumetric Accuracy Improvement of a Coordinate Measuring Machine by Double Ball-bar Measurement on a Virtual Tetrahedron / 165Seung-Han YANG(Kyungpook National University), Hoon-Hee LEE(Kyungpook National University), Kwang-Il LEE(Kyungil University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 15

ISGMA 2017

PP024 A Study on the Formability for the Ship Coupling in Profile Ring Rolling Process / 166Bae Sunmin(Gyeongsang National University), Kim Donghwan(International University of Korea)

PP025 Additional axis Design for increasing productivity / 167Junyoung Kim(Korea University), Daehie Hong(Korea University), Byunggon Kim(Korea University), Wanjin Kim(Korea University), Seongyong Park(MS AUTOTECH Co. Ltd), Wonik Eom(MS AUTOTECH Co. Ltd), Seok-hong Oh(Hae Won ENG), Kee-Jin Park(DAEGU MECHATRONICS & MATERIALS INSTITUTE)

PP026 Design of the Lightweight Seat Back Frame for Automobile by using FEM / 168Jun Young Yim(Chonbuk National University), Hee Yong Kang(Chonbuk National University), Jung Cheol Yoo(SH Global), Sung Mo Yang(Chonbuk National University)

PP027 Analysis of sound radiation by a vibrating rectangular bucket structure under impact force / 169Young-Hyu Choi(Changwon National University), Min-Gyu Kang(Changwon National University), Chang-Uk Kim(Changwon National University)

PP028 Automatic Design of Porous Shell Structures for Additive Manufacturing / 170Yeong Eun Lim(Seoul National University of Science and Technology), Keun Park(Seoul National University of Science and Technology)

PP029 Failure Diagnosis and Prognosis of a Paper Cup Forming Machine based on Condition Data Analysis / 171Jaeho Jang(Kumoh National Institute of Technology), Soelha Kim(Kumoh National Institute of Technology), Baeksuk Chu(Kumoh National Institute of Technology)

PP030 A study of the failure mode and mechanism analysis for the wall mounted elevator of a lighting device / 172Gi-Chun Lee(Korea Institute of Machinery and Materials), Yong-Bum Lee(Korea Institute of Machinery and Materials), Jong-Won Park(Korea Institute of Machinery and Materials), Cheong-Kwang Yang(Korea Institute of Machinery and Materials), Tae-Su Lee(NT Bank Co., LTD), Tae-Won Lee(Kumoh National Institute of Technology)

PP031 Durability Evaluation of Electrochromic window fabricated by Nano-Particle Deposition System (NPDS) / 173Jang-Yeob Lee(Seoul National University), In-Gyu Choi(Seoul National University), Hyungsub Kim(Hanyang University), Caroline Sunyong Lee(Hanyang University), Sung-Hoon Ahn(Seoul National University), Won-Shik Chu(Seoul National University)

PP032 Characterization of Thermal Aging Behavior of Rubber by Using Oxygen Consumption Rates / 174Sun Young Lee(Chungnam National University), Chun Su Kim(Chungnam National University), Woo Jin Oh(Chungnam National University), Seung Goo Lee(Chungnam National University)

PP033 Experimental Study for Achieving the Minimum Gear Profile Errors Based on Particle Swarm Optimization / 175Jiang Han(Hefei University of Technology), Bin Yuan(Hefei University of Technology), Lulu Wu(Hefei University of Technology), Xiaoqin Tian(Hefei University of Technology), Lian Xia(Hefei University of Technology)

ISGMA 2017

16 International Symposium on Green Manufacturing and Applications

PP034 A Study on Cost-Benefit Analysis of Photovoltaic system for the Private and Public Rental Apartments / 176Jihun Choi(Hanyang University), Sung-Yul Kim(Keimyung University), Ju Lee(Hanyang University)

PP035 SMA-based Soft Gripper for Adaptable and Effective Grasping / 177Wei Wang(Seoul National University), Min-Woo Han(Seoul National University), Hyung-Bin Park(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP036 Pouch-based Soft Twisting Actuator / 178Christine Heera Ahn(Sungkyunkwan University/ YISS), Hugo Rodrigue(Sungkyunkwan University)

PP037 Development of the Mirror Therapy Robot based on Air Pocket-type actuator for Hemiplegic Patients / 179Juseon Yoon(Handong University), Young Chan Kim(Handong University), Mi Ju Kim(Handong University), Jae Hyo Kim(Handong University)

PP038 Design of the Regression Model for Grasping Pattern and Grip Force Intensity of Myoelectric Prosthetic Hand for Upper-Limb Amputees / 180Woorim Cho(Handong University), Jiho Noh(Handong University), Jinuk Kim(Handong University), Jaehyo Kim(Handong University)

PP039 A Study on the Forming Analysis of Upper Seat Track using Ultra-High Strength Steel / 181Jun-Hwan Kim(Changwon National University), Choon-Man Lee(Changwon National University)

PP040 A Vibration-Based Algorithm for Mechanical Components Fault Diagnosis using EMD and SVM / 182Kyungho Lee(Changwon National University), Changwoo Lee(Changwon National University), Sunghwa Cho(Changwon National University)

PP041 Physical and Mechanical Properties of Plasticized Butenediol Vinyl Alcohol Co-polymer/Thermoplastic Starch Blend / 183Bich Nam Jung(Korea Institute of Industrial Technology), DongHo Kang(Korea Institute of Industrial Technology), Jin Kie Shim(Korea Institute of Industrial Technology), Sung Wook Hwang(Korea Institute of Industrial Technology)

PP042 Influence of solid solution hardening by homogenization on mechanical properties of as-hot rolled Al-3.5~7.5Mg-0.3~1.0Mn alloys / 184Bong-Hwan Kim(Korea Institute of Industrial Technology), Ji-Young Lee(Korea Institute of Industrial Technology), Seung-Yoon Yang(Korea Institute of Industrial Technology), Seong-Ho Ha(Korea Institute of Industrial Technology), Young-Ok Yoon(Korea Institute of Industrial Technology), Shae K. Kim(Korea Institute of Industrial Technology)

PP043 Synergy effect of Cu introduction into SnO2 sorbent for COS removal / 185Byeong Sub Kwak(Yeungnam University), No-Kuk Park(Yeungnam University), Jin Pyo Hong(Korea Electric Power Research Institute), Misook Kang(Yeungnam University)

PP044 Synthesis of Sn-modified Titania Nanotube via Different Tin Compounds Treatment / 186Cheng-Yen Tsai(National Taiwan University), Chen-Wuing Liu(National Taiwan University), Li-Chi Lai(National Taiwan University), Yi-Wen Lin(National Taiwan University)

PP045 A Study on Cu/Zn Diffusion Annealing Layer by Heat Treatment for Steel Core Electrical Discharging Machining Wire / 187Deokhyun Han(Institute for Advanced Engineering), Hyunseok Yang(Institute for Advanced Engineering), Woochul Jung(Institute for Advanced Engineering)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 17

ISGMA 2017

PP046 Influence of heat treatment on microstructures and mechanical properties of the high-strength heat-resistant Mg-3.0Nd-1.5Gd-0.5Zn-0.5Zr magnesium alloy / 188Liang Zhan(Shenyang Research Institute of Foundry), Zhijun Feng(Shenyang Research Institute of Foundry), Hongshun Jiang(Shenyang Research Institute of Foundry), Bo Xu(Shenyang Research Institute of Foundry)

PP047 Effect of Ca on Oxidation Behavior of Zn-Mg alloy Coating Bath / 189Shae K. Kim(Korea Institute of Industrial Technology), Seong-Ho Ha(Korea Institute of Industrial Technology), Nam-Seok Kim(Inha University), Young-Ok Yoon(Korea Institute of Industrial Technology), Hyun-Kyu Lim(Korea Institute of Industrial Technology)

PP048 Nanoclay-reinforced Plasma-treated Glass Fiber/Polyamide 6 Composites / 190Byeong-Joo Kim(Ulsan National Institute of Science and Technology), Young-Bin Park(Ulsan National Institute of Science and Technology)

PP049 Thermal properties of polyketone fiber/epoxy composites based on epoxy resin modified by phosphoric acid / 191Hani Jo(Chungnam National University), Seung Goo Lee(Chungnam National University), Jee-Woo Yang(Chungnam National University), Seo Bin Eom(Chungnam National University), Won Gi Jo(Chungnam National University), Hyeon Soo Lim(Chungnam National University)

PP050 Exploring Stable Structure of Solute Cluster in Al-Si Based Alloys by using First Principles Calculation and Kinetic Monte Carlo Method / 192Hiroshi Mito(Hiroshima University), Kenjiro Sugio(Hiroshima University), Yongbum Choi(Hiroshima University), Gen Sasaki(Hiroshima University)

PP051 Fracture Behavior of the Compact Tension Specimens of Structural Steel and CFRP Composite with Holes / 193Jaewoong Park(Kongju National University), Jae Ung Cho(Kongju National University), Guiping Zhao(Xi'an Jiaotong University)

PP052 The Effects of Surface Treatment on Polyketone Fabric for Polyurethane Coating / 194Jee-Woo Yang(Chungnam National University), Hani Jo(Chungnam National University), Seo Bin Eom(Chungnam National University), Seung Goo Lee(Chungnam National University)

PP053 A Comparative Study on Mechanical Properties of CFRTS and CFRTP Using Polyamide6 / 195Jihoon Hwang(Pusan National University), Minsik Lee(Pusan National University), Chunggil Kang(Pusan National University)

PP054 A study on comparison and formability of direct and indirect drawing by using theorical and experimental result / 196Ji-Seong Lim(Pusan National University), Chung-gil Kang(Pusan National University)

PP055 Effect of Short Glass Fiber and Nucleating Agent on Mechanical Properties and Crystallization Behavior of Polypropylene / Glass Fiber Composites / 197Jong Sung Won(Chungnam National University), Chun Su Kim(Chungnam National University), Jong Hyeon Park(Chungnam National University), Seon Woong Koo(Chungnam National University), Seung Goo Lee(Chungnam National University)

PP056 Study on the Cure Behavior of Epoxy with Addition of Polyphenylene Sulfide / 198JongHyeon Park(Chungnam National University), SeungGoo Lee(Chungnam National University)

ISGMA 2017

18 International Symposium on Green Manufacturing and Applications

PP057 Investigation of electrical property of PEDOT:PSS/CNT sheet composite films / 199Ju Hyeon Kim(Inha University), Tae June Kang(Inha University)

PP058 A Study on Static Fracture Property of DCB and TDCB Aluminum Foam Specimens for Type of Mode III due to Specimen Thickness / 200Jung Ho Lee(Kongju National University), Jae Ung Cho(Kongju National University), Guiping Zhao(Xi'an Jiaotong University)

PP059 Evaluation of Interfacial Thermal Resistance of Al-SiC Composites by Using Image-based Calculation / 201Keisuke Kono(Hiroshima University), Sugio Kenjiro(Hiroshima University), Yongbum Choi(Hiroshima University), Gen Sasaki(Hiroshima University)

PP060 Microstructure control of TiB2 particle dispersed steel composites / 202Koki Tominaga(Hiroshima University), Gen Sasaki(Hiroshima University), Kazunari Noguchi(Hiroshima University), Kenjiro Sugio(Hiroshima University), Yongbum Choi(Hiroshima University), Kazuhiro Matsugi(Hiroshima University)

PP061 Improvement of interfacial adhesion between carbon fiber and polyphenylenesulfide with electrophoresis process / 203SEON WOONG KOO(Chungnam National University), Seung Goo Lee(Chungnam National University), Jong Sung Won(Chungnam National University), Jong Hyun Park(Chungnam National University), Jin Wook Jeong(Chungnam National University)

PP062 Age Hardening Behavior of Al2Ca-added Al-5.6Zn-2.5Mg-1.4Cu Alloy Produced by Hot Rolling Process / 204Seung-Yoon Yang(Sungkyunkwan University), Bong-Hwan Kim(Korea Institute of Industrial Technology), Seong-Ho Ha(Korea Institute of Industrial Technology), Young-Ok Yoon(Korea Institute of Industrial Technology), Shae K. Kim(Korea Institute of Industrial Technology), Young Jig Kim(Sungkyunkwan University)

PP063 The Effect of Pre-deformation on Microstructure and Mechanical Properties of Al-5.8Zn-1.6Mg Alloy in Age-hardened Temper / 205Seung-Yoon Yang(Sungkyunkwan University), Bong-Hwan Kim(Korea Institute of Industrial Technology), Seong-Ho Ha(Korea Institute of Industrial Technology), Young-Ok Yoon(Korea Institute of Industrial Technology), Shae K. Kim(Korea Institute of Industrial Technology), Young Jig Kim(Sungkyunkwan University)

PP064 Evaluation of Electromagnetic Interference Shielding Properties of CFRP Laminated With Metal Wire Mesh / 206Alexandre Tugirumubano(Jeonju University), Vijay Santhiyagu Joseph(Jeonju University), Hyo-In Yoon(Jeonju University), Sun-Ho Go(Jeonju University), Jeong-Jin Lee(Jeonju University), Lee-Ku Kwac(Jeonju University), Hong-Gun Kim(Jeonju University)

PP065 Effect of Preparation Conditions on Thermal Properties of Graphite / Copper Composites / 207Yojiro Miyoshi(Hiroshima University), Gen Sasaki(Hiroshima University), Kenjiro Sugio(Hiroshima University), Yongbum Choi(Hiroshima University), Kazuhiro Matsugi(Hiroshima University)

PP066 Particle Detection of Al-SiC Particle-Dispersed Composites by using Image Recognition with Machine Learning Technique / 208Yosuke Otani(Hiroshima University), Kenjiro Sugio(Hiroshima University), Yongbum Choi(Hiroshima University), Gen Sasaki(Hiroshima University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 19

ISGMA 2017

PP067 Distribution of eutectic Si and Mg2Si and its effect on oxidation process in Al-Mg-Si alloys / 209Nam-Seok Kim(Inha University), Seong-Ho Ha(Korea Institute of Industrial Technology), Young-Ok Yoon(Korea Institute of Industrial Technology), Bong-Hwan Kim(Korea Institute of Industrial Technology), Shae K. Kim(Korea Institute of Industrial Technology)

PP068 A rapid continuous fabrication process of micro porous metal thin wire / 210Sungwon Youn(National Institute of Advanced Industrial Science and Technology), Toru Shimizu(National Institute of Advanced Industrial Science and Technology), Hideki Takagi(National Institute of Advanced Industrial Science and Technology), Sohei Matsumoto(National Institute of Advanced Industrial Science and Technology), Hiroshi HIROSHIMA(National Institute of Advanced Industrial Science and Technology), Ryutaro Maeda(National Institute of Advanced Industrial Science and Technology)

PP069 Surface enrichment of alkaline earth metal elements in Al and their effects on oxidation behavior in liquid state / 211Young-Ok Yoon(Korea Institute of Industrial Technology), Seong-Ho Ha(Korea Institute of Industrial Technology), Nam-Seok Kim(Inha University), Bong-Hwan Kim(Korea Institute of Industrial Technology), Shae K. Kim(Korea Institute of Industrial Technology)

PP070 Effect of Temperature-Humidity Treatment on Bend Reliability of Epoxy-contained Sn-58Bi Solder with Various Surface Finish / 212Haksan Jeong(Sungkyunkwan University), Woo-Ram Myung(Sungkyunkwan University), Yong-Gue Sung(Sungkyunkwan University), Seung-Boo Jung(Sungkyunkwan University)

PP071 Microstructure and Mechanical Property of Brazed Stainless Steel with Ag Content of Cd-free Filler Metals / 213Jong Gun Lee(Sungkyunkwan University), Byung Wook Ahn(Sungkyunkwan University), Hyun Joon Park(Sungkyunkwan University), Won Bae Lee(POSCO Global R n D center), Seung Boo Jung(Sungkyunkwan University)

PP072 Performance Evaluation of a New Type of MR Brake / 214Han Gyeol Gang(Kumoh National Institute of Technology), Seung-Bok Choi(Inha University), Jung Woo Sohn(Kumoh National Institute of Technology)

PP073 Shear-Compression Simultaneous Sensor Based on Flexible Carbon Nanocomposite Pillar Arrays / 215Chang Yoon Jeong(Ulsan National Institute of Science and Technology), Young-Bin Park(Ulsan National Institute of Science and Technology)

PP074 Looping Architecture for Three-dimensional Soft Morphing Structures / 216Min-Woo Han(Seoul National University), Jongha Yu(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP075 Development of C. Elegans Robot Actuated by SMA(Shape Memory Alloy) / 217Youngjoon Baek(Seoul National University), Beomjin Kim(Seoul National University), Sung-Hoon Ahn(Seoul National University), Min-Woo Han(Seoul National University)

PP076 Fabrication of micro nickel line tunable transmittance in real time / 218Seongwoo Kim(Kyungpook National University), MoonKyu Kwak(Kyungpook National University)

ISGMA 2017

20 International Symposium on Green Manufacturing and Applications

PP077 Triboelectric nanogenerator based on bacterial nanocellulose / 219Hyunjun Kim(Korea Advanced Institute of Science and Technology), Seongjun Kim(Chonnam National University), Jeongyoung Park(Korea Advanced Institute of Science and Technology), Ilkwon Oh(Korea Advanced Institute of Science and Technology)

PP078 Optoelectric response of aluminum oxide infilled colloidal quantum dot film / 220Hye-mi So(Korea Institute of Machinery and Materials), Won Seok Chang(Korea Institute of Machinery and Materials)

PP079 MECHNO-ELECTRICAL BEHAVIOR OF CARBON NANOTUBE Based POROUS STRUCTURE / 221Hye-mi So(Korea Institute of Machinery and Materials), Won Seok Chang(Korea Institute of Machinery and Materials)

PP080 Recycling processes of waste silicon photovoltaic module as a cement binder and their physical properties / 222Hongseok Jang(Chonbuk National University), Yongteak Lim(Chonbuk National University), Junhyeon Jo(Chonbuk National University)

PP081 Design Methodology for Hybridization of Additive and Subtractive Processes / 223Dong-Hyeon Kim(Seoul National University), Won-Shik Chu(Seoul National University), Thomas J. Y. Kim(Seoul National University), Choon-Man Lee(Changwon National University), Sung-Hoon Ahn(Seoul National University)

PP082 Experimental Investigation of Tribological Attributes of Chemical Mechanical Polishing for Printed Circuit Board / 224Minjong Yuh(Pusan National University), Soocheon Jang(Pusan National University), Jongwoo Lee(Pusan National University), Haedo Jeong(Pusan National University)

PP083 Design of Slurry-Particle/Chip Separation System in Pad Polishing / 225Dong-Ryul Kim(Seoul National University), Mincheol Kim(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP084 Embedded sensor onto composite fabricated by Aerodynamically focused nanoparticle (AFN) printer / 226Ho-Jin Kim(Seoul National University), Gil-Yong Lee(Seoul National University), Min-Soo Kim(Seoul National University), Hyung-Soo Kim(Seoul National University), Jin-Woo Oh(Seoul National University), Jeong-Beom Ihn(Boeing), Sung-Hoon Ahn (Seoul National University)

PP085 Actuation of Microscale Shape Memory Alloy Structure with Ion Beam Induced Heating Method / 227Hyun-Taek Lee(Seoul National University), Gil-Yong Lee(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP086 Enhancement of Crystallinity of Nickel Oxide Nano-Particles by Continuous-Laser Irradiation Process / 228Jaeho Shin(Seoul National University), Young Duk Suh(Seoul National University), Jinwook Jung(Seoul National University), Yeosang Yoon(Seoul National University), Seongmin Jeong(Seoul National University), Hyeonjin Eom(Korea Institute of Industrial Technology), Sukjoon Hong(Hanyang University), Daeho Lee(Gachon University), Seung Hwan Ko(Seoul National University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 21

ISGMA 2017

PP087 Effect of nozzle temperature on deposition characteristics using gas injection system / 229KANG IN LEE(Seoul National University), Jang-Yeob Lee(Seoul National University), Hyun-Taek Lee(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP088 Variable Gauge Factors of Strain Sensors Printed by Aerodynamically Focused Nanoparticles Printer / 230Min-Soo Kim(Seoul National University), Gil-Yong Lee(Seoul National University), Hyung-Soo Kim(Seoul National University), Ho-Jin Kim(Seoul National University), Jin-Woo Oh(Seoul National University), Jeong-Beom Ihn(Boeing corporation), Sung-Hoon Ahn(Seoul National University)

PP089 Fabrication of Piezoelectric Energy Harvester using Nano Particle Deposition System (NPDS) / 231Soo-Hong Min(Seoul National University), Sung-Hoon Ahn(Seoul National University), Gil-Yong Lee(Seoul National University), Hyun-Taek Lee(Seoul National University), Ho-Jin Kim(Seoul National University)

PP090 Effect of Plasma Assisted Deposition for Electrochromic Windows Fabrication Using Nano Particle Deposition System / 232Sung-Ik Park(Seoul National University), In-Gyu Choi(Seoul National University), Jang-Yeob Lee(Seoul National University), Doo-Man Chun(University of Ulsan), Caroline S. Lee(Hanyang University), Won-Shik Chu(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP091 Development of Carbon Fiber-Epoxy 3Dprinter for Direct Composite Repair / 233Hyung-Soo Kim(Seoul National University), Gil-Yong Lee(Seoul National University), Min-Soo Kim(Seoul National University), Ho-Jin Kim(Seoul National University), Jin-Woo Oh(Seoul National University), Jeong-Beom Ihn(Boeing), Sung-Hoon Ahn(Seoul National University)

PP092 Fabrication of superhydrophobic surface by 3D printing and dip coating / 234Kyong-Min Lee(University of Ulsan), Hani Park(University of Ulsan), Doo-Man Chun(University of Ulsan)

PP093 Image Monitoring Study on Fused Deposition Modeling (FDM) Fabrication Process / 235Hung-Yin Tsai(National Tsing Hua University), Wei-Yuan Hsu(National Tsing Hua University), Yi-Hung Chen(National Tsing Hua University), Che-Chih Tsao(National Tsing Hua University)

PP094 The Polyamide-12 Sintering Process Using A Diode Laser In Powder Bed Fusion / 236Jang Myoung Kim(Sentrol Col., Ltd), Hae Jeong Kim(Sentrol Col., Ltd), Sungwoo Bae(Sentrol Col., Ltd)

PP095 Fabrication and characterization of electrospun microfibrous structures / 237Young Hun Jeong(Kyungpook National University), Gwangjune Shin(Kyungpook National University)

PP096 A Nanoscale Recycle Processes via an Electromagnetic-Aid in Pulsed Electrical-Discharge Electrocorrosion / 238P.S. Pa(National Taipei University of Education)

PP097 Effect of thermal treatment about NPDS (Nano Particle Deposition System) for electrochromic window / 239Ji-Soo Kim(Seoul National University), In-Gyu Choi(Seoul National University), Doo-Man Chun(University of Ulsan), Caroline S. Lee(Hanyang University), Sung-Hoon Ahn(Seoul National University), Won-Shik Chu(Seoul National University)

ISGMA 2017

22 International Symposium on Green Manufacturing and Applications

PP098 Life Cycle Evaluation of Strain Sensor Printed with Silver Nanoparticles for Composite Health Monitoring / 240Jin Woo Oh(Seoul National University), Gil-Yong Lee(Seoul National University), Min-Soo Kim(Seoul National University), Jeong-Beom Ihn(Boeing), Sung-Hoon Ahn (Seoul National University)

PP099 Micro grinding of hard materials using EDMed PCD and PCBN tools / 241Pyeong An Lee(Soongsil University), Seungman Jung(Soongsil University), Bo Hyun Kim(Soongsil University)

PP100 Study of Sand Mould Milling Precision Based on Experiments / 242Zhu Fuxian(Jiangsu University of Technology)

PP101 A Study on the Prevention of Machine Tool Damage Using Material Property / 243JAEHYEOK KIM(Korea Institute of Industrial Technology), DONGYOON LEE(Korea Institute of Industrial Technology), KYUNGHEE Park(Korea Institute of Industrial Technology)

PP102 Micromachining of the micropatterns on the polytetrafluoroethylene (PTFE) Materials / 244Dong Min Kim(Ulsan National Institute of Science and Technology), Hyung Wook Park(Ulsan National Institute of Science and Technology)

PP103 Thermal Fatigue Behaviors on Carbide Tool in Wet and Cryogenic Conditions in Milling of Titanium / 245Gi-Dong Yang(Korea Institute of Industrial Technology), Kyung-Hee Park(Korea Institute of Industrial Technology), Mohd Azlan Suhaimi(Universiti Teknologi Malaysia), Dong Yoon Lee(Korea Institute of Industrial Technology), Seok-Woo Lee(Korea Institute of Industrial Technology)

PP104 Investigation on Mechanical Characteristics of Felt-Typed Polishing Pads / 246Hyunseop Lee(Tongmyong University), Dasol Lee(Pusan National University)

PP105 Analysis of the Influence of Cross-axis angle on Cutting Speed and Tooth Surface Structure during Gear Power Honing / 247Lian Xia(Hefei University of Technology), Dongling Wang(Hefei University of Technology), Bin Yuan(Hefei University of Technology), Jiang Han(Hefei University of Technology)

PP106 Effects of Machining Conditions and Tool Paths on the Deformation of Micro Structure / 248Ki-hyeong Song(Korea Institute of Industrial Technology), Young-jae Choi(Korea Institute of Industrial Technology), Dong-yoon Lee(Korea Institute of Industrial Technology), Hon-zong Choi(Korea Institute of Industrial Technology), Yong-shin Lee(Kookmin University)

PP107 Dynamic Analysis of Miniaturized Micro-Drilling Machine Tool / 249Longfei Hu(Dongfeng Nissan Passenger Vehicle), Sang Won Lee(Sungkyunkwan University)

PP108 Multitool Milling for cutting force reduction in the mobile machining system / 250Segon Heo(Korea Institute of Machinery and Materials), Jongyoup Shim(Korea Institute of Machinery and Materials), Seung-Kook Ro(Korea Institute of Machinery and Materials)

PP109 Effect of workpiece temperature on delamination of CFRP drilling / 251Gyuho Kim(Yonsei University), Tae In Ha(Yonsei University), Jae-Hyeong Park(Yonsei University), Eunseok Nam(Yonsei University), Byung-Kwon Min(Yonsei University), Tae-Gon Kim(Korea Institute of Industrial Technology), Seok-Woo Lee(Korea Institute of Industrial Technology)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 23

ISGMA 2017

PP110 Machinability of Ti-6Al-2Sn-4Zr-2Mo alloy using Abrasive Waterjet Machine / 252Thirumalai Kumaran S(Yeungnam University), Tae Jo Ko(Yeungnam University), Ki Moon Park(Yeungnam University), Uthayakumar M(Kalasalingam University), Suresh Kumar S(Kalasalingam University)

PP111 Analysis of Parameters affecting surface roughness in Sapphire Wafer Polishing using Nanocrystalline -Microcrystalline multilayer diamond CVD pallet / 253Joong-Cheul Yun(Korea University), Dae-Soon Lim(Korea University), Eung-seok Lee(Korea University), Choong-hyun Lee(Korea University), Young-kyun Lim(Korea University)

PP112 Burr Removal Rate Model in an Ultrasonic assisted Dry-EDM process for Deburring Drilled Holes of CFRP Composite using Regression Analysis / 254Rendi Kurniawan(Yeungnam University), Tae Jo Ko(Yeungnam University), Ji Hyeon Byeon(Yeungnam University)

PP113 Abrasive Waterjet Cutting of Redmud Filled Chemically Treated Pineapple Fiber Reinforced Polyester Composites / 255Arumugaprabu V(Yeungnam University), Taejo Ko(Yeungnam University), Yein Kwak(Yeungnam University)

PP114 3D Printing method for effectively cutting Expanded Polystyren(EPS) / 256Sangyeol Jeong(Korea University), Daehie Hong(Korea University), Hakmin Kim(Korea University)

PP115 3D Hybrid Bioprinting Technology and Its Applications / 257Hyun-Wook Kang(Ulsan National Institute of Science and Technology)

PP116 Fabrication Process of a Non-planar Tactile Sensor / 258In Hwan Lee(Chungbuk National University), Yong-sun Choi(Chungbuk National University), Ho-chan Kim(Andong National University), Hae-yong Cho(Chungbuk National University)

PP117 Design and Analysis of Personalized Cast with Porous Lightweight Structure / 259Keun Park(Seoul National University of Science and Technology), Na-Hyun Kim(Seoul National University of Science and Technology), Hye-Jin Choi(Seoul National University of Science and Technology), Yeong Eun Lim(Seoul National University of Science and Technology)

PP118 Development Plan of a Classification Scheme for Gaskets and O-rings Considering Maintenance Using 3D Printing / 260Taeyun Kim(Kyungpook National University), Moohyun Cha(Korea Institute of Machinery and Materials), Duhwan Mun(Kyungpook National University)

PP119 Research for a new green MID technology process with thermoplastic of attaching conductive polymer for generate conductive circuit seed / 261haeyong yun(Andong National University), Hochan Kim(Andong National University), Inhwan Lee(Chungbuk National University), Yonghwan Bae(Andong National University)

PP120 Experimental Study on Pre-heating Characteristics of a Powder Bed System using a Plasma Electron Beam / 262Ho-Jin Lee(Chosun University), Dong-Gyu Ahn(Chosun University), Jae-Guk Song (Chosun University), Eun Goo Kang(Korea Institute of Industrial Technology), Bihlii Chua(Chosun University)

ISGMA 2017

24 International Symposium on Green Manufacturing and Applications

PP121 A Study on Feeding Characteristics of a Powder Bed System According to Type of Feeding Blade / 263Ho-Jin Lee(Chosun University), Dong-Gyu Ahn(Chosun University), Jae-Guk Song(Chosun University)

PP122 Effects of inside angle of corrugated inner structures on drop impact characteristics of the lightweight sandwich plate / 264Yong-Hun Jang(Chosun University), Dong-Gyu Ahn(Chosun University), Dong-In Kim (Chosun University), Bo-Sung Shin(Pusan National University)

PP123 Material Properties of Electrically Assisted Pressure Joint of Titanium Alloys / 265Yong-Fang Li(University of Ulsan), Trung Thien Nguyen(University of Ulsan), Hrishikesh Das (University of Ulsan), Ju-Ri Kim(University of Ulsan), Sung-Tae Hong (University of Ulsan), Jinwook Jung(Seoul National University), Heung Nam Han(Seoul National University)

PP124 Electrically assisted springback reduction of super-elastic titanium alloys / 266Yong-Ha Jeong(University of Ulsan), Viet Tien Luu(University of Ulsan), Thi Anh Nguyet Nguyen (University of Ulsan), Sung-Tae Hong(University of Ulsan), Hyun Woo So(Lg electronics), Hye-Jin Jeong(Seoul National University), Heung Nam Han(Seoul National University)

PP125 Preparation and characterization of eco-friendly composite films made with poly (ethylene oxide)-lignin / 267Jung Woong Kim(Inha University), Tippabattini Jayaramudu(Inha University), Lindong Zhai (Inha University), Jeongho Park(Inha University), Jaehwan Kim(Inha University)

PP126 Tensile electroplasticity of dual phase ultra-high strength steel at different strain rates / 268Trung Thien Nguyen(University of Ulsan), Yong-Ha Jeong(University of Ulsan), Sung-Tae Hong(University of Ulsan), Hye-Jin Jeong(Seoul National University), Heung Nam Han(Seoul National University)

PP127 Fabrication of Ag conductive electrode using Ag organometallic ink on a flexible substrate and examination of its electrical and mechanical stability / 269Jinwoo Lee(Seoul National University), Seung-Hwan Ko(Seoul National University), Jaeho Shin(Seoul National University), Jinhyeong Kwon(Seoul National University), Ha Inho(Seoul National University), Hyunmin Cho(Seoul National University), Kyunkyu Kim(Seoul National University), Hyunseok Kim(Seoul National University), Yeosang Yoon(Seoul National University)

PP128 Microstructure analysis of high porosity nickel porous reinforced metal composites by infiltration and reaction method / 270Tomokazu Hirano(Hiroshima University), Yongbum Choi(Hiroshima University), Kazuhiro Matsugi(Hiroshima University), Zhefeng Zu(Hiroshima University), Kwnjiro Sugio(Hiroshima University), Gen Sasaki(Hiroshima University)

PP129 Effect of Electric Energy Density on Stress Relief Annealing of Automotive Springs / 271Gi Dong Park(University of Ulsan), Van Loi Tran(University of Ulsan), Sung-Tae Hong (University of Ulsan), In-Hye Kim(University of Ulsan), Ji Ye Hong(Daewon Kang Up Co., LTD, Chungnam), Sung-Woo Jin(Seoul National University), Heung Nam Han(Seoul National University)

PP130 Lightweight Design of Fiber Reinforced Composites for Automobile Parts / 272Jinyu Zhou(Jiangsu University of Technology), Jifeng Huang(Jiangsu University of Technology), Renxiang Hu(Jiangsu University of Technology)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 25

ISGMA 2017

PP131 Study on large thin-wall aluminum alloy shock tower sand casting trial-manufacture technology / 273Ming Ruan(Shenyang Research Institute of Foundry), Zhijun Feng(Shenyang Research Institute of Foundry), Fei Shi(Shenyang Research Institute of Foundry), Yufei Li(Shenyang Research Institute of Foundry), Liang Zhan(Shenyang Research Institute of Foundry), Wei Wang(Shenyang Research Institute of Foundry), Xin Su(Shenyang Research Institute of Foundry)

PP132 Effect of Electrode Vibration on Inclusions and Power Consumption of ZG04Cr13Ni4Mo Stainless Steel in ESR System / 274Zhao Wei Song(Shenyang Research Institute of Foundry), Yun Long Xiong(Shenyang Research Institute of Foundry), Rui Chen(Shenyang Research Institute of Foundry)

PP133 Effects of Nickel Additive on Micro-arc Oxidation Coating of AZ63B Magnesium Alloy / 275Wen Zhan(Wuhan Research Institute of Materials Protection), Feng Tian(Wuhan Research Institute of Materials Protection), Ou-Yang Gui(Wuhan Research Institute of Materials Protection)

PP134 Extraction behavior of rare earth element (Nd,Dy) from rare earth magnet by using molten magnesium / 276Teak-soo Kim(Korea University of Science and Technology), Yongsu Kim(Korea University of Science and Technology)

PP135 Impact Characteristics of Multi-layers Deposited Parts by a Direct Energy Deposition Process / 277Yong-Hun Jang(Chosun University), Dong-Gyu Ahn(Chosun University), Dong-In Kim (Chosun University), Woo-Sung Kim(Korea Institute of Industrial Technology)

PP136 Research on the bending property and acoustic emission characteristics of flexible oriented 3D composite / 278Xiaochuan Wu(China Academy of Machinery Science & Technology), Zhongde Shan(china academy of machinery science & technology), Yuan Wang(University Science and Technology Beijing), Feng Liu(china academy of machinery science & technology), Weixiao Du(china academy of machinery science & technology)

PP137 Improvement of surface area and humidity sensing capability of hierarchical titanium dioxide nanostructures / 279Hakyung Jeong(Konkuk University), Dongjin Lee(Konkuk University), Saeyoung Kim(Konkuk University), Jongsu Lee(Konkuk University), Youngwook Noh(Konkuk University)

PP138 Contact model dependency for residual stress and strain during powder packing process / 280JAEHEE LYU(Kumoh National Institute of Technology), JUNYOUNG PARK(Kumoh National Institute of Technology)

PP139 The characteristics of recycled composite pozzolanic materials as a high strength concrete binder / 281Hongseok Jang(Chonbuk National University), Juhee Kim(Chonbuk National University), Seugnyoung So(Chonbuk National University)

PP140 Highly porous nanocellulose foam for the removing of spilled oil on seawater / 282Young Ho Mun(Inha University), Tae June Kang(Inha University)

PP141 Design of Interlocking Compressed Earth Brick Machine and Properties of Brick / 283Christine Ahn(Sungkyunkwan University/ YISS), Binayak Bhandari(Woosong University/ IDIM Nepal)

ISGMA 2017

26 International Symposium on Green Manufacturing and Applications

PP142 Analysis of the Shear Deformation Behavior of Carbon Fabric based on Binder Treatment / 284Hye-In Kwon(Korea Textile Machinery Research Institute), Sang-Jin Lee(Korea Textile Machinery Research Institute), Hwan-Kuk Kim(Korea Textile Machinery Research Institute)

PP143 High Temperature Formability of Ti-6Al-4V Titanium Alloy Sheet / 285SEONG-WON LEE(Korea Institute of Industrial Technology), CHAN-JOO LEE(Korea Institute of Industrial Technology), YUN-KYUNG KIM(Dong A University), YOUNG-JUN KIM(CENTRAL CO.), JUNG-MIN LEE(Korea Institute of Industrial Technology)

PP144 A Study on Cold Ring Rolling of Copper for Fabrication of End Ring’s Preform / 286SEONG-WON LEE(Korea Institute of Industrial Technology), CHAN-JOO LEE(Korea Institute of Industrial Technology), YUN-KYUNG KIM(Dong A University), YOUNG-JUN KIM(CENTRAL CO.), JUNG-MIN LEE(Korea Institute of Industrial Technology)

PP145 Development of Undercut Shape Forging Technology of Double Flange Roller Parts using Split Mold / 287MinCheol Park(Korea Institute of Industrial Technology), Chanjoo Lee(Korea Institute of Industrial Technology), Mansoo Joun(Gyeongsang National University), Donghwan Kim(International University of Korea)

PP146 Multi-point iterative forming and its effect on springback and residual stress of sheet metal / 288Jun Chen(Jilin University), Wenzhi Fu(Jilin University), Mingzhe Li(Jilin University), Yu Wang(Jilin University), Xiaodong Liu(Jilin University)

PP147 Study on the Springback in Bending process of titanium sheet at various temperature / 289Hyunwoo Kim(Seoul National University of Science and Technology), Chang-Whan LEE(Seoul National University of Science and Technology)

PP148 Reducing the Computation Time in Shape Memory Alloys Tool Clamp Design / 290Sungcheul Lee(Korea Institute of Machinery and Materials), Seung-Kook Ro(Korea Institute of Machinery and Materials), Jong-Kweon Park(Korea Institute of Machinery and Materials)

PP149 Effect of casting process on microstructure and mechanical properties at ambient and elevated temperature of AZ91-Ca magnesium alloy / 291Yang Zhang(Jiangsu University of Technology), Fuxian Zhu(Jiangsu University of Technology), Xiaoping Li(Jiangsu University of Technology), Yalin Lu(Jiangsu University of Technology), Weining Lei(Jiangsu University of Technology)

PP150 The Technology of Roll-Forming for The PCM Plate Center of Refrigerator / 292Kim byeongcheol(Gyeongsang National University), Kim DongHwan(International University of Korea)

PP151 Block Shear Strength of STS304L Stainless Steel Fillet-welded Connection with Base Metal Fracture / 293HooChang Lee(Hanbat National University), BoKyung Hwang(Hanbat National University), TaeSoo Kim(Hanbat National University)

PP152 Application of Friction Stir Hole Clinching to Joining of Dissimilar Materials / 294Long-Hai Gao(Pusan National University), Gil-Seok Kang(Pusan National University), Chan-Joo Lee(Korea Institute of Industrial Technology), Byung-Min Kim(Pusan National University), Dae-Cheol Ko(Pusan National University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 27

ISGMA 2017

PP153 Application of Flexibly-reconfigurable Roll Forming using Sheet Metals / 295Min-Gyu Kil(Pusan National University), Ji-Woo Park(Pusan National University), Jun-Seok Yoon(Pusan National University), Jeong Kim(Pusan National University), Beom-Soo Kang(Pusan National University)

PP154 Inverse parameter estimation for electromagnetic forming simulation with reduce-order modeling / 296Seungmin Lee(Pusan National University), Kyunghoon Lee(Pusan National University), Beom-Soo Kang(Pusan National University)

PP155 Wear Testing Methods and Online Monitoring Study of Wet Clutch Friction Plate / 297Liyong Wang(Beijing Information Science & Technology University), Hao Li(Beijing Information Science and Technology University), Le Li(Beijing Information Science and Technology University)

PP156 Design of 3D Printed Insert Core for an Automotive Crash Pad in Injection Molding Process / 298Yong-Ha Cho(Pusan National University), Jae-Hong Kim(Pusan National University), Myong-Geun Lee(Hae-Chang Precision), Byung-Min Kim(Pusan National University)

PP157 Development of an Augmented Hansel-spittel Constitutive Equation / 299Seulki Kim(Pusan National University), Kyunghoon Lee(Pusan National University), Jihoon Kim(Pusan National University), Beomsoo Kang(Pusan National University)

PP158 Development of a cyclic hardening model of Transformation-Induced Plasticity steel / 300Sungwook Jun(Pusan National University), Jaebong Jung(Pusan National University), Hyun-Seok Lee(NARA Mold & Die Co., Ltd.), Byung-Min Kim(Pusan National University), Ji Hoon Kim(Pusan National University)

PP159 Prediction Model of Surface Residual Stress for Multi-pass Drawn Steel Wire / 301In-Kyu Lee(Korea Institute of Industrial Technology), Sung-Yun Lee(Korea Institute of Industrial Technology), Myeong-Sik Jeong(Korea Institute of Industrial Technology), Yong-Jae Cho(Korea Institute of Industrial Technology), Dae Hye Kim(Korea Institute of Industrial Technology), Sun-Kwang Hwang(Korea Institute of Industrial Technology), Byung-Min Kim(Pusan National University), Sang-Kon Lee(Korea Institute of Industrial Technology)

PP160 Comparison of microstructure and phase transformation of laser-welded joints in Al-10wt%Si-coated boron steel after hot stamping / 302Jung-Gil Yun(Pusan National University), Tae-jin Yoon(LG Electronics), Myeong-Hwan Oh(Sungwoo Hitech Co., Ltd.), Hyeon-jeong Shin(POSCO), Chung-Yun Kang(Pusan National University)

PP161 Study on numerical simulation of electrohydraulic forming / 303Min A Woo(Pusan National University), Woo Jin Song(Pusan National University), Beom Soo Kang(Pusan National University), Jeong Kim(Pusan National University)

PP162 Tool Fabrication for thick Plate Forming of Hollow-Partitioned Steam Turbine Nozzle / 304Bong-Seok Kwak(Pusan National University), Mahn-Jung Yoon(Power MnC Co. Ltd), Jae-Young Jeon(Power MnC Co. Ltd), Beom-Soo Kang(Pusan National University), Tae-Wan Ku(Pusan National University)

PP163 A study on compensation of machining error in the assembly phase of a highly precision machining center / 305Mingi Choi(Changwon National University), Changwoo Lee(Changwon National University)

ISGMA 2017

28 International Symposium on Green Manufacturing and Applications

PP164 Optimization of table and column position to minimize squareness in assembly process / 306SEONGHWA CHO(Changwon National University), CHANGWOO LEE(Changwon National University), MINGGI CHOI(Changwon National University)

PP165 A Basic Study on the Development of an Arc Assisted Machining System / 307Sung Ho Moon(Changwon National University), Ho In Jeong(Changwon National University), Choon Man Lee(Changwon National University)

PP166 3 Dimension Simulation of TIG Welding Arc Plasma on the V-groove Weld Joint / 308Yong Hee Oh(Changwon National University), Young Tae Cho(Changwon National University), Yoon Gyo Jung(Changwon National University)

PP167 A Study on the Structural Analysis for an Upper Seat Track using Ultra-high Strength Steel in Automobile / 309Young-Ho Choi(Changwon National University), Choon-Man Lee(Changwon National University), Sang-Seok Seol(Changwon National University), Byung-Hyun Ryu(Dong-Gu Co., LTD.)

PP168 Size-selected cluster ion beam for ligand etching of gold nanoparticles / 310Eun Ji Park(Korea Basic Science Institute), Jung-Hwan Kim(Korea Basic Science Institute), Chang Min Choi(Korea Basic Science Institute), Sang Ju Lee(Korea Basic Science Institute), Ji Young Baek(Korea Basic Science Institute), Young Dok Kim (Sungkyunkwan University), Myoung Choul Choi(Korea Basic Science Institute)

PP169 A diamond knife development based on the droplet dynamics for ultramicrotomy / 311Hwan Hur(Korea Basic Science Institute), Ji Yong Bae(Korea Basic Science Institute), Jooran Lee(Korea Basic Science Institute), Chan Bae Jeong(Korea Basic Science Institute), Geon-Hee Kim(Korea Basic Science Institute)

PP170 Mirror fabrication of 300 mm SiC substrates / 312Jeong-Yeol Han(Korea Astronomy and Space Science Institute), Myung Cho(National Optical Astronomy Observatory), Gary Poczulp(National Optical Astronomy Observatory), Dong-Kyun Kim(Green Optics Co., Ltd.), Hyoung Kwon Lee(Green Optics Co., Ltd.), Geon Hee Kim(Korea Basic Science Institute), Sangwon Hyun(Korea Basic Science Institute), Minwoo Jeon(Korea Basic Science Institute), Byeongjoon Jeong (Korea Basic Science Institute)

PP171 5-DOF Electron Microscope Sample Stage Design and Kinematic Analysis / 313Sang-Chul Lee(Korea Basic Science Institute), Jong-Man Jeung(Korea Basic Science Institute), Cheolsu Han(Korea Basic Science Institute), Jin-Gyu Kim(Korea Basic Science Institute)

PP172 Characteristics of Zerodur glass-ceramic by high speed grinding / 314In-Ju Yeo(Korea Basic Science Institute), Byeong-Joon Jeong(Korea Basic Science Institute), Min-Woo Jeon(Korea Basic Science Institute), Hwan-Jin Choi(Korea Basic Science Institute), I-Jong Kim(Korea Basic Science Institute), Hyo-Sik Kim(Korea Basic Science Institute), Jong-Ho Won(Chungnam National University), Geon-Hee Kim (Korea Basic Science Institute)

PP173 Removal of diamond turning marks in magneto-rheological finishing of Ni-P plated off-axis mirror / 315Minwoo Jeon(Korea Basic Science Institute), Byeongjoon Jeong(Korea Basic Science Institute), Sangwon Hyun(Korea Basic Science Institute), Inju Yeo(Korea Basic Science Institute), Hwanjin Choi(Korea Basic Science Institute), Geonhee Kim(Korea Basic Science Institute)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 29

ISGMA 2017

PP174 Wide Fractional Bandwidth Airborne Ultrasound Transducer based on Capacitive Micromachined Ultrasonic Transducer and Acoustic Block / 316Yeong Min Yun(Hanyang University), Kwan Kyu Park(Hanyang University)

PP175 HEV Motor Design Comparison of IPMSM with Sintered Rare-Earth Magnet and PMASynRM with Bonded Dy Free Magnet in the Same Size / 317Yo Han Hwang(Hanyang University), Tae Hwan Kim(Hyundai-Wia), Jung Woo Park (Hyundai-Wia), Duck Woong Shin(Hyundai-Wia), Ju Lee(Hanyang University)

PP176 Study on the Correlation between Harmonic Order of the bemf wave and Torque Ripple Order of the PM Motor / 318Yo Han Hwang(Hanyang University), Yong Chul Kim(Hanyang University), Ju Lee(Hanyang University)

PP177 Fingerprint Imaging Using CMUT Impediography Method / 319Yunsang Kwak(Hanyang University), Wonyoung Choi(Hanyang University), Kwankyu Park(Hanyang University)

PP178 Low-Cost Synthesis of Fe2O3 Hollow sphere for Arsenic Removal from Water / 320Sengeragchaa Bolortuya(Kumoh National Institute of Technology), Min Ji Hong(Kumoh National Institute of Technology), Sung Hyun Park(Kumoh National Institute of Technology), Yong Sik Kim(Kumoh National Institute of Technology), Hee Jin Kim(Kumoh National Institute of Technology), Sungjin Kim (Kumoh National Institute of Technology), Sunil Babu Eadi(Kumoh National Institute of Technology)

PP179 Ultra-thin film optical coatings for reflective color filters / 321Young Jin Yoo(Gwangju Institute of Science and Technology), Young Min Song(Gwangju Institute of Science and Technology)

PP180 The study on the optimal condition for thermal diffusivity measurements of solids using laser lock-in thermography / 322Seonjin Kim(Korea Basic Science Institute), Geonhee Kim(Korea Basic Science Institute), Kye-Sung Lee(Korea Basic Science Institute), Hwan Hur(Korea Basic Science Institute), Soonkyu Hwang(Korea Advanced Institute of Science and Technology), Seung-hyun Kim(Korea Basic Science Institute), Hee Chan Kang(Korea Basic Science Institute), I Jong Kim(Korea Basic Science Institute)

PP181 Design of LabVIEW FPGA IP Core for OCT pre-processing / 323Kyung-Chan Jin(Korea Institute of Industrial Technology), Gye-Sung Lee(Korea Basic Science Institute), Geon-Hee Kim(Korea Basic Science Institute)

PP182 Smart production control with cyber-physical systems for automobile parts manufacturing / 324Sung Il Kim(Sungkyunkwan University), Jun Kim(Sungkyunkwan University), Myoung Jun Ko(Sungkyunkwan University), JuneHyuck Lee(Sungkyunkwan University), Yong-Shin Kang(Sungkyunkwan University), Sang Do Noh(Sungkyunkwan University), Hyun-Jung Kim(Sungkyunkwan University)

PP183 Reconfigurability Assessments of Smart Assembly Lines using Cyber Physical System for Factory Design / 325JUNEHYUCK LEE(Sungkyunkwan University), Sang-Do Noh(Sungkyunkwan University)

ISGMA 2017

30 International Symposium on Green Manufacturing and Applications

PP184 Cyber Physical System for Service-oriented Product Design / 326Kyu-Young Hwang(Sungkyunkwan University), Jae-Tak Cho(Sungkyunkwan University), Sun-Hong Kim(Sungkyunkwan University), Young-Wook Nam (Sungkyunkwan University), Sang-Do Noh(Sungkyunkwan University)

PP185 EVALUATION OF WEAR BEAHAVIOR OF ROLLER CHAIN BY LUBRICATING OIL / 327CHANGUK KIM(Changwon National University), DONGWOO LEE(Changwon National University), JUNGIL SONG(Changwon National University)

PP186 Three-dimensional printed microfluidic channels : simulation and experiment / 328Seongyong Kim(Changwon National University), Changwoo Lee(Changwon National University)

PP187 A Study on the Determination of Optimum Machining Conditions in Laser-Assisted Fillet Milling of Titanium Alloy / 329Wan-Sik Woo(Changwon National University), Choon-Man Lee(Changwon National University)

PP188 A Basic Study on the Decomposition Prevention of Cutting Oil according to the Quantity and Cross-Sectional Area of an Copper Alloy / 330Young Hun Lee(Changwon National University), Jae Hyeon Ha(Changwon National University), Ju Han Lim(IENTECO. LTD.), Choon Man Lee(Changwon National University)

PP189 Surface Complexation Modeling of Arsenic-Contaminated Groundwater in Choushui River Alluvial Fan of Taiwan / 331Tsung-Nan Weng(National Taiwan University), Chen-Wuing Liu(National Taiwan University), Yi-Wen Chen(National Taiwan University)

PP190 Development of the Intelligent Production Management System for Smart Factory / 332Gyu-Bong Lee(Korea Institute of Industrial Technology), Joo-Sung Yoon(Korea Institute of Industrial Technology), Min-Jae Ko(Korea Institute of Industrial Technology), Il-Ha Park(Korea Institute of Industrial Technology)

PP191 Development of Smart MES-IoT Middleware Program for an Intelligent Production Management System for a Smart Factory / 333MinJae Ko(Korea Institute of Industrial Technology), Gyu-Bong Lee(Korea Institute of Industrial Technology), Joo-Sung Yoon(Korea Institute of Industrial Technology), Dong-Hyun Kim(Coever Information Technology Inc.)

PP192 Development of ISO 14649-based data schema for exception handling of machining active control / 334Il-Ha Park(Korea Institute of Industrial Technology), Joo-Sung Yoon(Korea Institute of Industrial Technology)

PP193 Study on safety evaluation of truck frame for high speed track measurement system / 335CHANWOO LEE(Korea Railroad Research Institute), ILYOON CHOI(Korea Railroad Research Institute)

PP194 On-board acceleration based low-cost rail surface defect detecting system / 336DongWook Kim(Korea University of Science and Technology), HyunKyu Jun(Korea Railroad Research Institute)

PP195 Fatigue and fracture behavior of wheel and rail steel for high speed rail / 337Jungwon Seo(Korea Railroad Research Institute), Seokjin Kwon(Korea Railroad Research Institute), Hyunkyu Jun(Korea Railroad Research Institute), Donghyeong Lee (Korea Railroad Research Institute)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 31

ISGMA 2017

PP196 Survey on V2X Communication for the Train Integrity in the Virtual Coupling Convoy / 338Moon-won Choi(Korea Railroad Research Institute), Han-sol Lee(Korea Railroad Research Institute), Min-soo Kim(Korea Railroad Research Institute)

PP197 Non-Destructive Diagnosis of Railway Bogie frame Using Infrared Thermography / 339Seok-Jin Kwon(Korea Railroad Research Institute)

PP198 A Study on the Safety Evaluation of Special Railway Vehicles / 340Young-Sam Ham(Korea Railroad Research Institute)

PP199 Development Trend of Virtual Coupling for Railroad Capacity Increase / 341Han-sol Lee(Korea Railroad Research Institute), Moon-won Choi(Korea Railroad Research Institute), Min-soo Kim(Korea Railroad Research Institute)

PP200 Accelerated Life Test Method for Railway Axle Bearing / 342Jaewon Lee(Sungkyunkwan University), Youngsam Ham(Korea Railroad Research Institute)

PP201 Spectral Transmittance Measurement and Visibility Performance Evaluation Methods for Vision Based Safety Sensors in Fog / 343Bong Keun Kim(AIST), Yasushi Sumi(AIST)

PP202 Analysis of a Spindle under Load Conditions Using Flexible Multi-body Dynamics / 344Byung-Sub Kim(Korea Institute of Machinery and Materials), Chan Hong Lee(Korea Institute of Machinery and Materials)

PP203 Dynamic performance analysis of a three degree of freedom 4RRR planar parallel manipulator / 345Juhyun Kim(KOREA INSTITUTE OF ROBOT AND CONVERGENCE), Yoongeul Lee(Tongmyong University), Manseung Seo(Tongmyong University)

PP204 Development of an Electromagnetic Eddy Current Damper for Vibration Suppression applied to an Efficient Check-Weigher Model / 346ABDELHAKIM MAKROUM(Pusan National University), JUNG HWAN AHN(Pusan National University), HWA YOUNG KIM(Pusan National University)

PP205 Analysis of Non-holonomic Path Planning Method for Vehicle Parking Assistance System / 347Changhwan Song(Korea University), Daehie Hong(Korea University), Wooseok Seo(Korea University)

PP206 Development of Piezo Actuator Based Dynamic Testing System for Thin Plate Material / 348Daejhoong Yun(Pusan National University), Jung Hwan Ahn(Pusan National University)

PP207 Design of An Independently Driven Continuous Track System for Disaster Robot / 349Dongbin Shin(Korea University), Daehie Hong(Korea University), Yeonho Ko(Korea University)

PP208 Fabrication of rubber bush with multi-property phase using smart materials / 350Jin-Woo Oh(Seoul National University), Ji-Soo Kim(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP209 Natural Convection Heat Transfer Enhancement by Chimney Effect in Plate-Fin Heat Sink / 351Jong-Dae Kim(Korea Institute of Machinery and Materials), Young-Bog Ham(Korea Institute of Machinery and Materials)

ISGMA 2017

32 International Symposium on Green Manufacturing and Applications

PP210 A Study on the Collision Characteristic of the Side Car Crash Simulation with various barrier / 352Min-sik Lee(Pusan National University), Chung-gil Kang(Pusan National University)

PP211 Development of handling performance optimization of the meta model based on the CTBA vehicle model / 353Minwoo Joo(Kookmin University), Kyueun Cho(Kookmin University), Younggeul Park(Kookmin University), Jayil Jeong(Kookmin University)

PP212 AEBS Safety Simulation of highway cut-in scenarios / 354myoungyeon Park(Kookmin University), WooYeong Jang(Kookmin University), YoungGeul Park(Kookmin University), InSeong Choi(Korea Automobile Testing & Research Institute, Korea Transportation Safety Authority), YunSeog Hong(Korea Automobile Testing & Research Institute, Korea Transportation Safety Authority), JaeKon Shin(Korea Automobile Testing & Research Institute, Korea Transportation Safety Authority), JayIl Jeong(Kookmin University)

PP213 Developement of Quadrupedal Ambulatory Miniature Robot using Piezoelectric Benders / 355Seong Kyu Cheon(Changwon National University), Seong Su Jeong(Changwon National University), Min Ho Park(Changwon National University), Ho Ik Jun (Changwon National University), Jung Hwan Kim(Changwon National University), Tae Hoon Kim(Changwon National University), Tae Gone Park(Changwon National University)

PP214 Development of Ball Bearing Friction Performance Tester / 356Seung Won Choi(Kangwon National University), Hyung Jin Kim(Kangwon National University), Young Ho Seo(Kangwon National University), Byeong Hee Kim(Kangwon National University)

PP215 Modeling and analysis of linear roller bearings / 357Sun-Woong Kwon(Kumoh National Institute of Technology), Van-Canh Tong(Kumoh National Institute of Technology), Seong-Wook Hong(Kumoh National Institute of Technology)

PP216 Design of an piezoelectric actuator which has T-shaped stator / 358Tae Hoon Kim(Changwon National University), Tae Gone Park(Changwon National University), Seong Su Jeong(Changwon National University), Ho Ik Jun(Changwon National University), Seong Kyu Cheon(Changwon National University), Min Ho Park(Changwon National University), Jeong Hwan Kim(Changwon National University)

PP217 Vibration analysis of flexible rotor system supported by angular contact ball bearings / 359Seong-Wook Hong(Kumoh National Institute of Technology), Van-Canh Tong(Kumoh National Institute of Technology), Eui-Wook Jeong(Kumoh National Institute of Technology), Sun-Woong Kwon(Kumoh National Institute of Technology)

PP218 A study on the application of the right leg drive in electromyography-the effects of DC offset onto the common mode noise / 360Zinvi Fu(Universiti Teknikal Malaysia Melaka), Ahmad Yusairy Bani Hashim(Universiti Teknikal Malaysia Melaka), Zamberi Jamaludin(Universiti Teknikal Malaysia Melaka), Imran Syakir Mohamad(Universiti Teknikal Malaysia Melaka)

PP219 Experimental validation of an RTC (reaction torque compensated) Induction Motor / 361Manh-Hai HOANG(Soongsil University), Hyeong-Joon AHN(Soongsil University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 33

ISGMA 2017

PP220 Investigation of the PEB(Polymer Elastic Bump) Face-Down Assembly Process for Ultra-Thin Flexible Package / 362Jae Hak Lee(Korea Institute of Machinery and Materials), Chung Woo Lee(Korea University of Science and Technology), Yong Jin Kim(Korea Institute of Machinery and Materials), Seung Man Kim(Korea Institute of Machinery and Materials), Jun-Yeob Song(Korea Institute of Machinery and Materials)

PP221 Double exposure sintering of conductive ink for fabrication of flexible electronics / 363Won Seok Chang(Korea University of Science and Technology), Seok Yong Ji(Korea University of Science and Technology)

PP222 Mapping of light-confiment effect on ZnO nanograting structure using confocal microscopy based scanning photocurrent measurement / 364Won Seok Chang(Korea Institute of Machinery and Materials), Cheolmin Park(Korea Institute of Machinery and Materials)

PP223 Flexible 3D Interconnection and Repair Technology for Hybrid Flexible Electronics Devices / 365Yongjin Kim(Korea Institute of Machinery and Materials), Jae Hak Lee(Korea Institute of Machinery and Materials), Seung Man Kim(Korea Institute of Machinery and Materials), Joon Yub Song(Korea Institute of Machinery and Materials)

PP224 Enhancing Transdermal Drug Delivery By Porous PLGA-Coated SUS Microneedles / 366Asad Ullah(Kyungpook National University), Chul Min Kim(Kyungpook National University), Gyu Man Kim(Kyungpook National University)

PP225 Fabrication and experiment of quantitative inejction microfluidic chip applicable to chemical luminescence tests / 367Bong Su Kang(Kyungpook National University), Moon Kyu Kwak(Kyungpook National University)

PP226 Analysis an electric field during electrospinning process with hollow circular collector / 368DongHee Kang(Chonnam National University), HyunWook Kang(Chonnam National University)

PP227 The effect of generation of reverse current on relative ratio in μ-EDM using deionized water / 369Hyeong Gyun Cheong(Seoul National University), Yoo Seok Kim(Seoul National University), Chong Nam Chu(Seoul National University)

PP228 Investigation of Flash Lamp Annealing Effects on ITO Thin Films Deposited on PI Flexible Substrates / 370Kim Yoonsuk(Hongik University), Park Seungho(Hongik University), Hwang Jin-Ha (Hongik University), Kim Byung-Kuk(Viatron technologies), Kim Hyoung June(Viatron technologies), Choi Yoojin(Hongik University)

PP229 The influence of absorbent viscosity on laser-induced backside wet etching microfabrication / 371Kui Kam Kwon(Seoul National University), Haan Kim(Seoul National University), Chong Nam Chu(Seoul National University)

PP230 Shape-control of 0D/1D NaFe0.9Mn0.1PO4 nano-complex by electrospinning / 372Mi-Ra Shin(Korea National University of Transportation), Jong-Tae Son(Korea National University of Transportation), Jin-Ju Bae(Korea National University of Transportation), Ji-Woong Shin(Korea National University of Transportation), Kyoung-Tae Kim(Korea National University of Transportation)

ISGMA 2017

34 International Symposium on Green Manufacturing and Applications

PP231 An efficient water collection on a superhydrophilic surface with patterned hydrophobic regions using hierarchical nano structures / 373Na Kyong Kim(Chonnam National University), Hyun Wook Kang(Chonnam National University)

PP232 Plasmonic Metasurfaces Fabrication by Nano-Transfer method / 374SoonHyoung Hwang(Korea Institute of Machinery and Materials), Sohee Jeon(Korea Institute of Machinery and Materials), JunHo Jeong(Korea Institute of Machinery and Materials), Jae Ryoun Youn(Seoul National University)

PP233 Coloring Effect Of Various Nano-Pore Diameters On The Aluminum Alloy With Anodizing Process / 375Yoo Su Kang(Kangwon National University), Woong Ki Jang(Kangwon National University), Young Ho Seo(Kangwon National University), Byeong Hee Kim(Kangwon National University)

PP234 Optimal Arrangement of VCSEL Modules for Uniform Thermal Annealing of Large-Scale Silicon Wafers / 376Youngsu Noh(Hongik University), Seongho Park(Hongik University), Yoonsuk Kim (Hongik University), Hyoungjune Kim(Hongik University), Byungkuk Kim(Viatron Technologies, Inc.), Wangjun Park(Viatron Technologies, Inc.)

PP235 Fabrication and application of 3D cross-structure based on nanoimprint lithography and welding technology / 377Zhijun Zhao(Korea Institute of Machinery and Materials), Ji-Hye Lee(Korea Institute of Machinery and Materials), Dae-Geun Choi(Korea Institute of Machinery and Materials), Sang-Hu Park(Pusan National University), Jun-Ho Jeong(Korea Institute of Machinery and Materials)

PP236 Nanometer-scale 2D perforation of freestanding graphene via energetic ion bombardment / 378Hyung Gyu Park(ETH Zurich)

PP237 A Study on the Design of a Pitch Controller of a Small-Scale Wind Turbine Simulator to Emulate a MW Wind Turbine / 379Chae Wook Lim(Hanbat National University)

PP238 Shape Optimization of Generator in Large-Scale Wind Turbine by Desirability Function Approach / 380Hyo-Lim Kang(Dong A University), Tae-An Kim(Dong A University), Hye-Won Han (Dong A University), Hyung-Joon Park(Dong A University), Seung-Ho Han(Dong A University)

PP239 Spray-Coated PbS Quantum Dot Ink Solar Cells / 381Hyekyoung Choi(Korea Institute of Machinery and Materials), Sam S. Yoon(Korea University), Hyung Cheoul Shim(Korea Institute of Machinery and Materials), Sohee Jeong(Korea Institute of Machinery and Materials)

PP240 Functional composite films of nanocellulose and PDMS for improving the performance of solar cells / 382Jei Gyeong Jeon(Inha University), Tae June Kang(Inha University)

PP241 Appropriate Monitoring Platform for Renewable Energy Plants in Nepal / 383Jung-Wook Moon(Seoul National University), Jang-Yeob Lee(Seoul National University), Minsik Kim(Seoul National University), Sung-Hoon Ahn(Seoul National University)

PP242 A Study on Determining an Appropriate Power Trading Contract to Promote Renewable Energy Systems / 384Yeon Joo Choi(Keimyung University), Sung Yul Kim(Keimyung University)

June 27 (Tue) ~ July 1 (Sat), 2017, HICO, Gyeongju, Korea 35

ISGMA 2017

PP243 Graphene Oxide Membrane for Energy Devices / 385MD SHAHJAHAN KABIR CHOWDURY(Kumoh National Institute of Technology), Yong-il Park(Kumoh National Institute of Technology), SungBum Park(Kumoh National Institute of Technology)

PP244 Battery cell arrangement and cooling air flow rate effects on the cooling performance in a battery pack / 386JAEHUN CHOI(Changwon National University), Heesung Park(Changwon National University), Hwabhin Kwon(Changwon National University)

PP245 Verification of Durability Performance Test and Analysis for Fatigue Life Prediction of Vibration-Based Energy Harvester / 387Ji-Won Jin(Jeonbuk Institute of Automotive convergence Technology), Jae-Hoon Kim (Korea Railroad Research Institute), Ki-Weon Kang(Kunsan National University)

PP246 Surface-Functionalized Triboelectric Nanogenerator as a Self-Powered Gas Sensor / 388Bui Quoc Huy Nguyen(Chonnam National University), Jingui Qian(Chonnam National University), Dong-Weon Lee(Chonnam National University)

PP247 Preparation and Characterization of Poly(methyl methacrylate) (PMMA) Microencapsulated Phase Change Materials by Solvent Evaporation Method / 389Ying-Jun Quan(Seoul National University), In-Gyu Choi(Seoul National University), Jong-Ha Yu(Seoul National University), Won-Shik Chu(Seoul National University), Stephen M. Hsu(George Washington University), Sung-Hoon Ahn(Seoul National University)

PP248 Effect of MnO2 as Stabilizer in Cu-Fe based Oxygen Carrier / 390Yong Han Jeong(Yeungnam University), No-Kuk Park(Yeungnam University), Tae Jin Lee(Yeungnam University), Si Ok Ryu(Yeungnam University), Misook Kang (Yeungnam University), Jeom-In Baek(Korea Electric Power Research Institute), Ho-Jung Ryu(Korea Institute Energy Research)

PP249 The Effect of Humidification Condition on Durability Performance of PEMFC Stack / 391Hyung-Chul Noh(SEJONG Industrial Co., Ltd.), Ho-Cheol Suh(SEJONG Industrial Co., Ltd.)

PP250 Activity Tests of Rh/Al-Ce-Zr Catalyst Coated on Metal Foam Plate for Auto-Thermal Reforming of VOC / 392No-Kuk Park(Yeungnam University), Yong Han Jeong(Yeungnam University), Tae Jin Lee (Yeungnam University), Suk Hwan Kang(Institute for Advanced Engineering)

PP251 Development of microfluidic microbial fuel cell with embossed electrodes based on low oxygen permeable material / 393Hyeong-Min Cho(Hanyang University), Cheolhee Lee(Hanyang University), Do-gyun Jung(Hanyang University), Taeseong Choi(Hanyang University), Cheon-Ho Lee(Hanyang University), Yoomin Ahn(Hanyang University)

PP252 Oxygen Reduction Reaction of Thin Film Solid Oxide Fuel Cell with Different Active Areas / 394Ikwhang Chang(Wonkwang University), Yusung Kim(Seoul National University), Suk Won Cha(Seoul National University)

PP253 Reversed Transfer Process of Tribofilm Formed on Wear Track / 395Shu-Sheng Xu(Yonsei University), Dae-Eun Kim(Yonsei University)

PP254 Experimental Research on Decontamination of Radioactive Metal Waste with Induction Melting / 396Pengfei ZHAO(Pusan National University), Seokyoung Ahn(Pusan National University)