ISO Update · ISO Update, Supplement to ISO Focus -- June 2016 3. ISO 7010:2011/CD Amd 232 Graphical symbols — Safety colours and safety signs — …

ISO Update Supplement to ISOfocus

June 2016

ISO Update, Supplement to ISO Focus -- June 2016 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 May to 31 May 2016

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 10 Technical product documentation

ISO/CD 21143 Requirements of virtual assembly test for me-chanical products

ISO/CD 21600 Technical product documentation (TPD) — General requirements of mechanical product digital manual

TC 17 Steel

ISO/CD 4954 Steels for cold heading and cold extruding

ISO/CD 15835-1

Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements

ISO/CD 15835-2

Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 2: Test methods

TC 22 Road vehicles

ISO/CD 6469-2 Electrically propelled road vehicles — Safety specifications element — Part 2: Vehicle opera-tional safety

ISO/CD 12405-4

Electrically propelled road vehicles --Test spec-ification for lithium-ion traction battery packs and systems — Part 4: Performance testing

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 4254-6 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors

ISO/CD 10625 Equipment for crop protection — Sprayer noz-zles — Colour coding for identification

ISO/CD 19932-1

Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements

ISO/CD 19932-2

Equipment for crop protection — Knapsack sprayers — Part 2: Test methods

TC 31 Tyres, rims and valves

ISO/CD 4250-1 Earth-mover tyres and rims — Part 1: Tyre designation and dimensions

ISO/CD 4250-2 Earth-mover tyres and rims — Part 2: Loads and inflation pressures

TC 34 Food products

ISO/CD 6888-3 Microbiology of the food chain — Horizontal method for the enumeration of coagulase-posi-tive staphylococci (Staphylococcus aureus and other species) — Part 3: Detection and MPN technique for low numbers

ISO/CD 16140-3

Microbiology of the food chain — Method validation — Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory

TC 43 Acoustics

ISO/DTS 11819-3

Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Refer-ence tyres

ISO/CD 12913-2

Acoustics — Soundscape — Part 2: Data collection

ISO/CD 13471-1

Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method

ISO/CD 19488 Acoustics — Acoustic classification scheme for dwellings

TC 45 Rubber and rubber products

ISO/CD 2004 Natural rubber latex concentrate — Centri-fuged or creamed, ammonia-preserved types — Specifications

TC 58 Gas cylinders

ISO/CD 10460 Gas cylinders — Welded carbon-steel gas cylinders — Periodic inspection and testing

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 12749-5

Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Reactors

TC 92 Fire safety

ISO/CD 1716 Reaction to fire tests for products — Deter-mination of the gross heat of combustion (calorific value)

ISO/CD 19677 Guidelines for assessing the adverse impact of wildland fires on the environment

TC 106 Dentistry

ISO/CD 7405 Dentistry — Evaluation of biocompatibility of medical devices used in dentistry

ISO/CD 19023 Dentistry — Orthodontic anchor screws

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO/DTR 19664

Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure in the workplace according to the requirements of health and safety

TC 114 Horology

ISO/CD 18684 Timekeeping instruments — Watch external parts made of hard materials — General re-quirements and test methods

TC 127 Earth-moving machinery

ISO/CD 20474-15

Earth-moving machinery — Safety — Part 15: Requirements for compact tool carriers

TC 145 Graphical symbols

2 ISO Update, Supplement to ISO Focus -- June 2016

ISO/CD 28564-3

Public information guidance systems — Part 3: Guidelines for the design and use of informa-tion index signs

ISO 7010:2011/CD Amd 199

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 199: Safety sign W043: Crushing of foot by force applied from above

ISO 7010:2011/CD Amd 200

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 200: Safety sign W044: Crushing of hand by force applied from above

ISO 7010:2011/CD Amd 201

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 201: Satefy sign W045: Crushing of hand by force applied from side

ISO 7010:2011/CD Amd 202

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 202: Safety sign W046: Crushing of leg by force applied from side

ISO 7010:2011/CD Amd 203

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 203: Safety sign W047: Crushing of whole body by excavator

ISO 7010:2011/CD Amd 204

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 204: Safety sign W048: Crushing of whole body by loader bucket

ISO 7010:2011/CD Amd 205

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 205: Safety sign W049: Crushing of whole body by machine rollover (no ROPS)

ISO 7010:2011/CD Amd 206

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 206: Safety sign W050: Crushing of whole body by machine rollover (with ROPS)

ISO 7010:2011/CD Amd 207

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 207: Safety sign W051: Crushing of whole body by runaway bale

ISO 7010:2011/CD Amd 208

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 208: Safety sign W052: Crushing of whole body by runover or backover by excavator

ISO 7010:2011/CD Amd 209

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 209: Safety sign W053: Crushing of whole body by runover or backover by tractor

ISO 7010:2011/CD Amd 210

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 210: Safety sign W054: Crushing of whole body and pinning by force applied from above

ISO 7010:2011/CD Amd 211

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 211: Safety sign W055: Dismemberment by front engine mower or lawn tractor operat-ing in forward direction

ISO 7010:2011/CD Amd 212

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 212: Safety sign W056: Dismemberment by front engine mower or lawn tractor operat-ing in rearward direction

ISO 7010:2011/CD Amd 213

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 213: Safety sign W057: Entanglement of arm in belt drive

ISO 7010:2011/CD Amd 214

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 214: Safety sign W058: Entanglement of arm in machinery, general

ISO 7010:2011/CD Amd 215

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 215: Safety sign W059: Entanglement of arm in rotating gears

ISO 7010:2011/CD Amd 216

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 216: Safety sign W060: Entanglement of arm in rotating horizontal auger

ISO 7010:2011/CD Amd 217

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 217: Safety sign W061: Entanglement of arm in rotating vertical auger

ISO 7010:2011/CD Amd 218

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 218: Safety sign W062: Entanglement of fingers and hand in cotton stripper cleaner drive

ISO 7010:2011/CD Amd 219

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 219: Safety sign W063: Entanglement of hand in belt drive

ISO 7010:2011/CD Amd 220

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 220: Safety sign W064: Entanglement of hand in chain drive

ISO 7010:2011/CD Amd 221

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 221: Safety sign W065: Entanglement of hand in toothed belt drive

ISO 7010:2011/CD Amd 222

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 222: Safety sign W066: Entanglement of leg in cotton picker spindles

ISO 7010:2011/CD Amd 223

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 223: Safety sign W067: Entanglement of leg in rotating horizontal auger

ISO 7010:2011/CD Amd 224

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 224: Safety sign W068: Entanglement or severing of leg or foot in trencher

ISO 7010:2011/CD Amd 225

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 225: Safety sign W069: Entanglement of whole body by rotating shaft

ISO 7010:2011/CD Amd 226

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 226: Safety sign W070: High pressure fluid injection into flesh

ISO 7010:2011/CD Amd 227

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 227: Safety sign W071: High pressure spray, erosion of flesh

ISO 7010:2011/CD Amd 228

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 228: Safety sign W072: Loss of tractor-implement control

ISO 7010:2011/CD Amd 229

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 229: Safety sign W073: Severing of fingers by fan blade

ISO 7010:2011/CD Amd 230

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 230: Safety sign W074: Severing of fingers by impeller blade

ISO 7010:2011/CD Amd 231

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 231: Safety sign W075: Severing of fingers by mower blade


ISO 7010:2011/CD Amd 232

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 232: Safety sign W076: Severing of fingers or hand by sharp object

ISO 7010:2011/CD Amd 233

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 233: Safety sign W077: Severing of leg by saw blade

ISO 7010:2011/CD Amd 234

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 234: Safety sign W078: Severing of foot by mover blade

ISO 7010:2011/CD Amd 235

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 235: Safety sign W079: Severing of toes or foot by sharp object

ISO 7010:2011/CD Amd 236

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 236: Safety sign W080: Thrown or flying objects, exposure of face

ISO 7010:2011/CD Amd 237

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 237: Safety sign W081: Thrown or flying objects, exposure of whole body

ISO 7010:2011/CD Amd 238

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 238: Safety sign W082: Ballasted tire

TC 147 Water quality

ISO/CD 7027-2 Water quality — Determination of turbidity — Part 2: Semi-quantitative methods

ISO/CD 16266-2

Water quality — Detection and enumeration of Pseudomonas aeruginosa — Part 2: Most probable number method

TC 150 Implants for surgery

ISO/CD 14117 Active implantable medical devices — Electro-magnetic compatibility — EMC test protocols for implantable cardiac pacemakers, implant-able cardioverter defibrillators and cardiac resynchronization devices

ISO/CD 14708-2

Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers

ISO/CD 14708-6

Implants for surgery — Active implantable medical devices — Part 6: Particular require-ments for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)

TC 165 Timber structures

ISO/DTR 19623

Timber structures — Glued laminated timber — Assigned of glued laminated timber character-istic values from laminate propoerties

TC 171 Document management applications

ISO/CD 18759 Document management — Trusted WORM functional and technical requirements

TC 172 Optics and photonics

ISO/CD 11981 Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses

TC 188 Small craft

ISO/CD 12215-5

Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination

TC 194 Biological and clinical evaluation of medical devices

ISO/DTR 10993-22

Biological evaluation of medical devices — Part 22: Guidance on nanomaterials

TC 198 Sterilization of health care products

ISO/CD 13408-2

Aseptic processing of health care products — Part 2: Filtration

TC 206 Fine ceramics

ISO/CD 19604 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure — Testing method for creep behavior under tensile loading

ISO/CD 19628 Fine Ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical proper-ties of ceramic composites - Determination of specific heat capacity

ISO/CD 20323 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mecanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties of tubes

ISO/CD 26602 Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing elements

TC 211 Geographic information/Geomatics

ISO/CD 19123-2

Geographic information — Schema for cover-age geometry and functions — Part 2: Cover-age implementation schema

ISO 19157:2013/CD Amd 1

Geographic information — Data quality — Amendment 1

TC 213 Dimensional and geometrical product specifications and verification

ISO/CD 21204 Geometrical product specifications (GPS) — Edges of defined shape

JTC 1 Information technology

ISO/IEC CD 24787

Information technology — Identification cards — On-card biometric comparison

ISO/IEC CD 27007

Information technology — Security techniques — Guidelines for information security manage-ment systems auditing

ISO/IEC PDTR 27008

Information technology — Security techniques — Guidelines for the assessment of informa-tion security controls

ISO/IEC CD 27019

Information technology — Security techniques — Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry

ISO/IEC CD 27021

Information technology — Security techniques — Competence requirements for information security management systems professionals

ISO/IEC PDTS 29167-15

Information technology — Automatic identi-fication and data capture techniques — Part 15: Crypto suite XOR security services for air interface communications

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only


Vote terminates

IIW International Institute of Welding

ISO/DIS 18785-1

* Friction stir spot welding — Alu-minium — Part 1: Terminology

2016-08-30

ISO/DIS 18785-2

* Friction stir spot welding — Aluminium — Part 2: Design of weld joints

2016-08-30

ISO/DIS 18785-3

* Friction stir spot welding — Alu-minium — Part 3: Qualification of welding operators

2016-08-30

ISO/DIS 18785-4

* Friction stir spot welding — Aluminium — Part 4: Specifica-tion and qualification of welding procedures

2016-08-30

ISO/DIS 18785-5

* Friction stir spot welding — Aluminium — Part 5: Quality and inspection requirements

2016-08-30

COPOLCO Committee on consumer policy

ISO/IEC DGuide 46

* Comparative testing of consum-er products and related services — General principles

2016-09-16

(Revision of ISO/IEC Guide 46:1985)

PC 273 Customer contact centres

ISO/DIS 18295-1

* Customer contact centres — Part 1: Requirements for cus-tomer contact centres

2016-09-12

ISO/DIS 18295-2

* Customer contact centres — Part 2: Requirements for using the services of customer contact centres

2016-09-12

TC 6 Paper, board and pulps

ISO/DIS 9416 * Paper — Determination of light scattering and absorption coef-ficients (using Kubelka-Munk theory)

2016-08-09

(Revision of ISO 9416:2009)

TC 20 Aircraft and space vehicles

ISO/DIS 10537 * Space data and information transfer systems — Encapsula-tion service

(Revision of ISO 10537:2010, ISO 10537:2010/Amd 1:2015)

TC 22 Road vehicles

ISO/DIS 6626-2

* Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron

2016-08-30

(Revision of ISO 6626-2:2013)

ISO/DIS 8535-1

* Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes

2016-08-16


TC 24 Particle characterization including sieving

ISO/DIS 21501-4

* Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne parti-cle counter for clean spaces

2016-08-17


TC 30 Measurement of fluid flow in closed conduits

ISO/DIS 20456 * Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flow-meters for conductive liquids

2016-08-04

(Revision of ISO 13359:1998, ISO 6817:1992, ISO 9104:1991)

TC 34 Food products

ISO/DIS 19660 * Cream — Determination of fat content — Acido-butyrometric method

2016-08-16

ISO/DIS 19662 * Milk — Determination of fat content — Acido-butyrometric (Gerber method)

2016-08-16

ISO/DIS 13722 * Microbiology of the food chain — Enumeration of Brochothrix spp. — Colony-count technique

2016-08-18


TC 35 Paints and varnishes

ISO/DIS 12944-4

* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 4: Types of surface and surface preparation

2016-08-19


ISO/DIS 12944-5

* Paints and varnishes — Corro-sion protection of steelstructures by protective paint systems — Part 5: Protective paint systems

2016-08-19


ISO/DIS 12944-8

* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 8: Development of specifications for new work and maintenance

2016-08-19


ISO/DIS 12944-9

* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 9: Protective paint systems and laboratory perfor-mance test methods for offshore and related structures

2016-08-19



ISO/DIS 11237 * Rubber hoses and hose as-semblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

2016-08-23


ISO/DIS 19984-1

* Rubber and rubber products — Determination of biobased con-tent — Part 1: General principles and calculation methods using formulation


ISO/DIS 19984-2

* Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content

ISO/DIS 19984-3

* Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content

ISO/DIS 20851 * Synthetic rubber latex — Exami-nation for micro-organisms

2016-08-18

ISO/DIS 2321 * Rubber threads — Methods of test

2016-08-30


TC 61 Plastics

ISO/DIS 16620-5

* Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content

2016-08-09

ISO/DIS 19929 * Plastics — Determination of average molecular mass and mixture ratio of poly (ethylene glycol) and its derivatives by MALDI-TOF-MS

2016-08-09

ISO/DIS 19935-1

* Plastics — Temperature modu-lated DSC — Part 1: General principles

2016-08-09

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 17781.2

Petroleum, petrochemical and natural gas industries — Test methods for quality control of microstructure of ferritic/ austen-itic (duplex) stainless steels

2016-07-12

TC 68 Financial services

ISO/DIS 12812-1.2

* Core banking — Mobile financial services — Part 1: General framework

2016-07-13

TC 96 Cranes

ISO/DIS 8566-5

* Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes

2016-08-11


TC 105 Steel wire ropes

ISO/DIS 2408 * Steel wire ropes — Minimum requirements

2016-08-16


ISO/DIS 3108 * Steel wire ropes — Test method — Determination of measured breaking force

2016-08-16


TC 106 Dentistry

ISO/DIS 9917-2

* Dentistry — Water-based ce-ments — Part 2: Resin-modified cements

2016-08-19


ISO/DIS 28319 * Dentistry — Laser welding

2016-08-05


ISO/DIS 19490 * Dentistry — Sinus membrane elevator

2016-08-30

ISO/DIS 11609 * Dentistry — Dentifrices — Re-quirements, test methods and marking


TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 20267 * Thermal spraying — Determina-tion of interfacial toughness of ceramic coatings by indentation

2016-08-16

TC 123 Plain bearings

ISO/DIS 6279 * Plain bearings — Aluminium al-loys for solid bearings


ISO/DIS 10129 * Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions


TC 126 Tobacco and tobacco products

ISO/DIS 13276 * Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid

2016-08-23


TC 130 Graphic technology

ISO/DIS 19593-1

* Graphic technology — Use of PDF to associate processing steps and content data — Part 1: Processing steps 2016

2016-08-18

TC 131 Fluid power systems

ISO/DIS 6301-1

* Pneumatic fluid power — Com-pressed-air lubricators — Part 1: Main characteristics to be in-cluded in supplier's literature and product-marking requirements

2016-08-04


ISO/DIS 23309 * Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing

2016-08-09


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 19469-1

* Plastic piping systems for non pressure underground drainage — Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasti-cized poly(vinyl chloride) (PVC-U) — Part 1: General requirements and performance characteristics

2016-08-03


ISO/DIS 19469-3

* Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasti-cized poly(vinyl chloride) (PVC-U) — Part 3: Pipes and fittings for deep burial installations

2016-08-03


ISO 7001:2007/DAmd 96

* Graphical symbols — Public information symbols — Amend-ment 96: PI TF 042: Meeting point

2016-08-18

ISO 7001:2007/DAmd 97

* Graphical symbols — Public information symbols — Amend-ment 97: PI TF 043: Tour group meeting point

2016-08-18

ISO 7001:2007/DAmd 98

* Graphical symbols — Public information symbols — Amend-ment 98: Symbol PI PF 074: Automatic sensor faucet

2016-08-18

ISO 7001:2007/DAmd 99

* Graphical symbols — Public information symbols — Amend-ment 99: PI PF 075: Hand dryer

2016-08-18

ISO 7001:2007/DAmd 100

* Graphical symbols — Public information symbols — Amend-ment 100: PI PF 076: Toilet paper

2016-08-18


ISO/DIS 20595 * Water quality — Determina-tion of selected easily volatile organic compounds in water — Method using gas chroma-tography and mass spectrometry by static headspace technique (HS-GC-MS)

2016-08-26

TC 158 Analysis of gases

ISO/DIS 16664 * Gas analysis — Handling of cali-bration gases and gas mixtures — Guidelines

2016-08-26


TC 159 Ergonomics

ISO/DIS 9241-125

* Ergonomics of human-system interaction — Part 125: Guid-ance on visual presentation of information

2016-08-12


TC 164 Mechanical testing of metals

ISO/DIS 15653 * Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds

2016-08-12


TC 165 Timber structures

ISO/DIS 12122-6

* Timber structures — Determina-tion of characteristic values — Part 6: Large components and assemblies

2016-08-03


ISO/DIS 11554 * Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics

2016-08-19


TC 182 Geotechnics

ISO/DIS 18674-3

* Geotechnical investigation and testing — Geotechnical monitoring by field instrumenta-tion — Part 3: Measurement of displacements across a line: inclinometers

2016-08-26

TC 184 Automation systems and integration

ISO/DIS 15531-44

* Industrial automation systems and integration — Industrial manufacturing management data — Part 44: Information modelling for shop floor data acquisition

2016-08-30


TC 190 Soil quality

ISO/DIS 11272 * Soil quality — Determination of dry bulk density

2016-08-12


TC 198 Sterilization of health care products

ISO/DIS 15883-4

* Washer-disinfectors — Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermo-labile endoscopes

2016-08-05


TC 199 Safety of machinery

ISO/DIS 14118 * Safety of machinery — Preven-tion of unexpected start-up

2016-08-25


TC 206 Fine ceramics

ISO/DIS 19613 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer

2016-07-26

TC 211 Geographic information/Geomatics

ISO/DIS 19155-2

* Geographic information — Place Identifier (PI) architecture — Part 2: Place Identifier (PI) linking

2016-08-23

TC 220 Cryogenic vessels

ISO/DIS 20421-2.2

* Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements

2016-07-05


ISO/DIS 21028-2.2

* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C

2016-07-04


ISO/DIS 23208 * Cryogenic vessels — Cleanliness for cryogenic service

2016-08-16


TC 244 Industrial furnaces and associated processing equipment


ISO/DIS 13578 * Industrial furnaces and as-sociated processing equip-ment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces

2016-08-12

TC 249 Traditional chinese medicine

ISO/DIS 18662-1

* Traditional Chinese medicine — Vocabulary — Part 1: Chinese Materia Medica

2016-08-04

ISO/DIS 19611 * Traditional Chinese medicine — Air exhaust cupping apparatus for medical use

2016-08-11

TC 269 Railway applications

ISO/DIS 19659-1

* Railway applications — Heating, ventilation and air conditioning systems for rolling stock — Part 1: Terms and definitions

2016-08-09

CASCO Committee on conformity assessment

ISO/IEC DIS 17021-2

* Conformity assessment — Re-quirements for bodies provid-ing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of envi-ronmental management systems

2016-08-06

(Revision of ISO/IEC TS 17021-2:2012)


ISO/IEC DIS 20741

* Systems and Software Engineer-ing — Guideline for the evalu-ation and selection of software engineering tools

2016-08-23

ISO/IEC DIS 7812-1

* Identification cards — Iden-tification of issuers — Part 1: Numbering system

2016-08-30

(Revision of ISO/IEC 7812-1:2015)

ISO/IEC DIS 7812-2

* Identification cards — Identifica-tion of issuers — Part 2: Applica-tion and registration procedures

2016-08-30

(Revision of ISO/IEC 7812-2:2015)

ISO/IEC 10373-6/DAmd 4

* Identification cards — Test meth-ods — Part 6: Proximity cards — Amendment 4: Conformance test plan

2016-08-25

ISO/IEC 14496-3:2009/DAmd 6

* Information technology — Cod-ing of audio-visual objects — Part 3: Audio — Amendment 6: Profiles, levels and downmix-ing method for 22.2 channel programs

2016-08-23

ISO/IEC DIS 23000-17

* Information technology — Mul-timedia application format (MPEG-A) — Part 17: Multiple sensorial media application format

2016-08-23

ISO/IEC DIS 24707

* Information technology — Com-mon Logic (CL) — A framework for a family of logic-based languages

2016-08-17

(Revision of ISO/IEC 24707:2007)

ISO/IEC 19794-6:2011/DAmd 2

* Information technology — Bio-metric data interchange formats — Part 6: Iris image data — Amendment 2: XML Encoding and clarification of defects

2016-08-04

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates


ISO/FDIS 2470-1

* Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

2016-07-21


ISO/FDIS 9197 * Paper, board and pulps — Determination of water-soluble chlorides

2016-07-11


ISO/FDIS 11476

* Paper and board — Determi-nation of CIE whiteness, C/2° (indoor illumination conditions)

2016-07-11


TC 17 Steel

ISO/FDIS 14590

* Cold-reduced steel sheet of high tensile strength and low yield point with improved formability

2016-06-28


TC 22 Road vehicles

ISO/FDIS 12619-4

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve

2016-07-17

ISO/FDIS 12619-5

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve

2016-07-17

ISO/FDIS 14469

* Road vehicles — Compressed natural gas (CNG) refuelling connector

2016-07-21

(Revision of ISO 14469-1:2004, ISO 14469-2:2007, ISO 14469-3:2006)

TC 29 Small tools

ISO/FDIS 4230 * Hand- and machine-operated circular screwing dies for taper pipe threads — R series

2016-07-19



ISO/FDIS 4231 * Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

2016-07-19


ISO/FDIS 10898

* Spot drills

2016-07-16


TC 31 Tyres, rims and valves

ISO/FDIS 18106

* Passenger car, commercial vehicle, truck and bus tyres — Methods for measuring snow grip performance — Loaded new tyres

2016-07-04

TC 38 Textiles

ISO/FDIS 18264

* Textile slings — Lifting slings for general purpose lifting opera-tions made from fibre ropes — High Modulus PolyEthylene (HMPE)

2016-07-16

ISO/FDIS 1144 * Textiles — Universal system for designating linear density (Tex System)

2016-07-24


TC 43 Acoustics

ISO/FDIS 10140-1

* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 1: Application rules for specific products

2016-07-13

(Revision of ISO 10140-1:2010, ISO 10140-1:2010/Amd 1:2012, ISO 10140-1:2010/Amd 2:2014)


ISO/FDIS 6235 * Rubber, raw — Determination of block polystyrene content — Ozonolysis method

2016-07-17


TC 61 Plastics

ISO/FDIS 11357-1

* Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

2016-08-05


ISO/FDIS 18830

* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measur-ing the oxygen demand in closed respirometer

2016-07-09

ISO/FDIS 19679

* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

2016-07-09

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 16440

* Petroleum and natural gas indus-tries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines

2016-07-06

ISO/FDIS 20088-1

* Determination of the resistance to cryogenic spillage of insula-tion materials — Part 1: Liquid phase

2016-07-04

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO/FDIS 1135-3

* Transfusion equipment for medi-cal use — Part 3: Blood-taking sets for single use

2016-07-23


ISO/FDIS 8871-5

* Elastomeric parts for parenterals and for devices for pharmaceuti-cal use — Part 5: Functional requirements and testing

2016-07-06


TC 83 Sports and other rec-reational facilities and equipment

ISO/FDIS 20957-9

* Stationary training equipment — Part 9: Elliptical trainers, additional specific safety require-ments and test methods

2016-07-13


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/FDIS 16645

* Radiological protection — Medi-cal electron accelerators — Re-quirements and recommenda-tions for shielding design and evaluation

2016-07-17

TC 106 Dentistry

ISO/FDIS 3964 * Dentistry — Coupling dimen-sions for handpiece connectors

2016-07-06


ISO/FDIS 9173-1

* Dentistry — Extraction forceps — Part 1: General requirements

2016-07-19


ISO/FDIS 16409

* Dentistry — Oral hygiene products — Manual interdental brushes

2016-07-13

(Revision of ISO 16409:2006, ISO 16409:2006/Amd 1:2010)

ISO/FDIS 14801

* Dentistry — Implants — Dynamic fatigue test for endosseous dental implants

2016-07-27


TC 121 Anaesthetic and respiratory equipment

ISO/FDIS 5366 * Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors

2016-07-19

(Revision of ISO/DIS 5366-1, ISO/DIS 5366-3)

ISO/FDIS 18190

* Anaesthetic and respiratory equipment — General require-ments for airways and related equipment

2016-07-14



ISO/FDIS 1219-3

* Fluid power systems and com-ponents — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams

2016-07-18

ISO/FDIS 11171

* Hydraulic fluid power — Cali-bration of automatic particle counters for liquids

2016-07-04



ISO 17885:2015/FDAmd 1

* Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1

2016-07-04

TC 149 Cycles

ISO/FDIS 6699 * Cycles — Handlebar centre and stem dimensions

2016-07-01



ISO/FDIS 148-1

* Metallic materials — Charpy pendulum impact test — Part 1: Test method

2016-07-19


ISO/FDIS 148-2

* Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

2016-07-19


ISO/FDIS 148-3

* Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

2016-07-19


ISO/FDIS 27306

* Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

2016-07-19



ISO/FDIS 12870

* Ophthalmic optics — Spectacle frames — Requirements and test methods

2016-07-11


TC 182 Geotechnics

ISO/FDIS 22476-15

* Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling

2016-07-06

ISO/FDIS 22477-10

* Geotechnical investigation and testing — Testing of geotechni-cal structures — Part 10: Testing of piles: rapid load testing

2016-07-06

TC 201 Surface chemical analysis

ISO/FDIS 15471

* Surface chemical analysis — Au-ger electron spectroscopy — De-scription of selected instrumental performance parameters

2016-07-12


ISO/FDIS 17973

* Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis

2016-07-12


TC 209 Cleanrooms and associat-ed controlled environments

ISO/FDIS 14644-14

* Cleanrooms and associated con-trolled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration

2016-07-13

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 1 * Geometrical product speci-fications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties

2016-07-06


ISO/FDIS 10360-12

* Geometrical product specifica-tions (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 12: Articulated arm coor-dinate measurement machines (CMM)

2016-07-26

ISO/FDIS 18391

* Geometrical product specifi-cations (GPS) — Population specification


ISO/FDIS 21028-1

* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C

2016-07-06


TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators

ISO/FDIS 24521

* Activities relating to drinking water and wastewater services — Guidelines for the manage-ment of basic onsite domestic wastewater services

2016-07-08

TC 238 Solid biofuels

ISO/FDIS 18846

* Solid biofuels — Determination of fines content in quantities of pellets

2016-07-06

ISO/FDIS 18847

* Solid biofuels — Determination of particle density of pellets and briquettes

2016-07-16

TC 249 Traditional chinese medicine

ISO/FDIS 18746

* Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use

2016-07-01

TC 260 Human resource management


ISO/FDIS 30405

* Human resource management — Guidelines on recruitment

2016-07-07

ISO/FDIS 30408

* Human resource manage-ment — Guidelines on human governance

2016-07-07

TC 266 Biomimetics

ISO/FDIS 18457

* Biomimetics — Biomimetic materials, structures and components

2016-07-01

TC 299 Robotics

ISO/FDIS 18646-1

* Robots and robotic devices — Performance criteria and related test methods for service robots — Part 1: Locomotion for wheeled robots

2016-07-22


ISO/IEC FDIS 11770-6

Information technology — Secu-rity techniques — Key manage-ment — Part 6: Key derivation

2016-07-19

ISO/IEC FDIS 27011

Information technology — Se-curity techniques — Code of practice for Information secu-rity controls based on ISO/IEC 27002 for telecommunications organizations

2016-07-13

(Revision of ISO/IEC 27011:2008)

ISO/IEC 19794-14:2013/FDAmd 1

* Information technology — Bio-metric data interchange formats — Part 14: DNA data — Amend-ment 1: Conformance testing and clarification of defects

2016-07-06

Standards published

New International Standards published between 01 May and 31 May 2016


** French version of standard previously published in English only

Price

group

REMCO Committee on reference materials

ISO/TR 16476:2016

* Reference materials — Establishing and expressing metrological trace-ability of quantity values assigned to reference materials

D


ISO 11093-4:2016

Paper and board — Testing of cores — Part 4: Measurement of dimensions

B

ISO 16260:2016

Paper and board — Determination of internal bond strength

C

TC 17 Steel

ISO 6931-1:2016

* Stainless steels for springs — Part 1: Wire

D

TC 20 Aircraft and space vehicles

ISO 7257:2016 * Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test

B

TC 21 Equipment for fire protection and fire fighting

ISO 7076-6:2016

* Fire protection — Foam fire extinguish-ing systems — Part 6: Vehicle mounted compressed air foam systems

D

TC 22 Road vehicles

ISO 12619-2:2014/Amd 1:2016

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 2: Performance and general test methods — Amendment 1

XZ

TC 34 Food products

ISO 16634-2:2016

Food products — Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products

D

ISO 12966-3:2016

Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)

A

ISO 21033:2016

Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)

C

TC 35 Paints and varnishes

ISO 4628-10:2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appear-ance — Part 10: Assessment of degree of filiform corrosion

B

TC 38 Textiles

ISO 105-D02:2016

Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents

A

ISO 105-G01:2016

* Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides

B

ISO 105-G04:2016

* Textiles — Tests for colour fastness — Part G04: Colour fastness to nitrogen oxides in the atmosphere at high humidities

B

ISO 105-X12:2016

Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing

A

ISO 105-X16:2016

Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas

A


TC 39 Machine tools

ISO 2407:1997/Amd 1:2016

Test conditions for internal cylindrical grinding machines with horizontal spin-dle — Testing of accuracy — Amend-ment 1

XZ

TC 42 Photography

ISO 20087:2016

* Photography — Digital still cameras — Battery life measurement

B

TC 43 Acoustics

ISO 16254:2016

Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method

F

TC 44 Welding and allied processes

ISO 17777:2016

Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification

B

ISO 19288:2016

Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification

A

ISO 10656:2016

* Resistance welding equipment — Transformers — Integrated transform-ers for welding guns

B


ISO 813:2016 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method

B

ISO 14558:2016

Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy

B

TC 58 Gas cylinders

ISO 16148:2016

Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing

E

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 24817:2015

Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and de-sign, installation, testing and inspection

H

TC 70 Internal combustion engines

ISO 8528-8:2016

Reciprocating internal combustion engine driven alternating current gener-ating sets — Part 8: Requirements and tests for low-power generating sets

B

ISO 8528-13:2016

Reciprocating internal combustion engine driven alternating current gen-erating sets — Part 13: Safety

F

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 17785-1:2016

* Testing methods for pervious concrete — Part 1: Infiltration rate

A

TC 72 Textile machinery and accessories

ISO 11111-1:2016

Textile machinery — Safety re-quirements — Part 1: Common requirements

G

ISO 11111-2:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 2: Spinning preparatory and spinning machines — Amendment 2

XZ

ISO 11111-3:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 3: Nonwoven machinery — Amendment 2

XZ

ISO 11111-4:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2

XZ

ISO 11111-5:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 5: Preparatory machin-ery to weaving and knitting — Amend-ment 2

XZ

ISO 11111-6:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 6: Fabric manufacturing machinery — Amendment 2

XZ

ISO 11111-7:2005/Amd 2:2016

Textile machinery — Safety require-ments — Part 7: Dyeing and finishing machinery — Amendment 2

XZ

TC 92 Fire safety

ISO 3008-3:2016

* Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented

C

ISO/TS 29761:2015

Fire safety engineering — Selection of design occupant behavioural scenarios

D

TC 94 Personal safety -- Protective clothing and equipment

ISO 16900-10:2015

Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to ignition, flame, radiant heat and heat

D

ISO 16900-12:2016

Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures

C

ISO/TS 16973:2016

Respiratory protective devices — Classification for respiratory protec-tive device (RPD), excluding RPD for underwater application

E

ISO/TS 16975-2:2016

* Respiratory protective devices — Se-lection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protec-tive device programme

C

ISO/TS 16976-1:2015

Respiratory protective devices — Hu-man factors — Part 1: Metabolic rates and respiratory flow rates

D

TC 106 Dentistry

ISO/TR 18130:2016

* Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants

B

TC 108 Mechanical vibration, shock and condition monitoring


ISO 16063-17:2016

* Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge

B

TC 110 Industrial trucks

ISO 18479-2:2016

* Rough-terrain trucks — Non-integrated personnel work platforms — Part 2: User requirements

C

TC 119 Powder metallurgy

ISO 4499-3:2016

Hardmetals — Metallographic deter-mination of microstructure — Part 3: Measurement of microstructural fea-tures in Ti (C, N) and WC/cubic carbide based hardmetals

D

TC 121 Anaesthetic and respiratory equipment

IEC 80601-2-35:2009/Amd 1:2016

* Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Amendment 1

XZ


ISO 13031:2016

* Earth-moving machinery — Quick couplers — Safety

B

TC 130 Graphic technology

ISO 12641-1:2016

* Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration

D

ISO/TS 15311-1:2016

* Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema

C

ISO 17972-2:2016

* Graphic technology — Colour data exchange format (CxF/X) — Part 2: Scanner target data (CxF/X-2)

B

ISO 19445:2016

* Graphic technology — Metadata for graphic arts workflow — XMP meta-data for image and document proofing

B


ISO 3601-5:2015

* Fluid power systems — O-rings — Part 5: Specification of elastomeric materi-als for industrial applications

C

TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

ISO 18163:2016

Clothing — Digital fittings — Vo-cabulary and terminology used for the virtual garment

C

ISO 18831:2016

Clothing — Digital fittings — Attributes of virtual garments

C

TC 135 Non-destructive testing

ISO 18081:2016

Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission

E


ISO 18489:2015

* Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic load-ing — Cracked Round Bar test method

B


ISO 7001:2007/Amd 3:2016

* Graphical symbols — Public informa-tion symbols — Amendment 3

E


ISO 9649:2016 * Metallic materials — Wire — Reverse torsion test

A

TC 168 Prosthetics and orthotics

ISO 10328:2016

Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods

H

ISO 22675:2016

Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods

H


ISO 9022-9:2016

* Optics and photonics — Environmental test methods — Part 9: Solar radiation and weathering

B

ISO 14133-1:2016

* Optics and photonics — Specifications for binoculars, monoculars and spot-ting scopes — Part 1: General purpose instruments

A

ISO 14133-2:2016

* Optics and photonics — Specifications for binoculars, monoculars and spot-ting scopes — Part 2: High perfor-mance instruments

A

ISO 10685-2:2016

Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commer-cial information

C

ISO 18189:2016

* Ophthalmic optics — Contact lenses and contact lens care products — Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions

B

TC 188 Small craft

ISO 14895:2016

Small craft — Liquid-fuelled galley stoves and heating appliances

B

TC 193 Natural gas

ISO/TR 14749:2016

* Natural gas — Online gas chromato-graph for upstream area

D

TC 197 Hydrogen technologies

ISO 17268:2012

Gaseous hydrogen land vehicle refuel-ling connection devices

E

TC 199 Safety of machinery

ISO 14122-1:2016

Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access

B


ISO 14122-2:2016

Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways

C

ISO 14122-3:2016

Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails

D

ISO 14122-4:2016

Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders

F


ISO/TR 18394:2016

* Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information

D

TC 204 Intelligent transport systems

ISO 13184-2:2016

* Intelligent transport systems (ITS) — Guidance protocol via personal ITS station for advisory safety systems — Part 2: Road guidance protocol (RGP) requirements and specification

H

ISO/TS 17425:2016

* Intelligent transport systems — Co-operative systems — Data exchange specification for in-vehicle presentation of external road and traffic related data

H

ISO/TS 21219-1:2016

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 1: Introduction, numbering and versions (TPEG2-INV)

B

ISO/TS 21219-10:2016

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 10: Conditional access information (TPEG2-CAI)

B

ISO/TS 21219-14:2016

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 14: Parking informa-tion application (TPEG2-PKI)

F

ISO/TS 21219-15:2016

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)

G


ISO 17450-3:2016

Geometrical product specifications (GPS) — General concepts — Part 3: Toleranced features

D

TC 215 Health informatics

ISO/TS 19256:2016

* Health informatics — Requirements for medicinal product dictionary systems for health care

F

IEC/TR 80001-2-8:2016

* Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guid-ance — Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2

F

TC 217 Cosmetics

ISO/TR 19838:2016

Microbiology — Cosmetics — Guide-lines for the application of ISO stand-ards on Cosmetic Microbiology

C


ISO 21013-3:2016

Cryogenic vessels — Pressure-relief accessories for cryogenic ser-vice — Part 3: Sizing and capacity determination

E

TC 238 Solid biofuels

ISO 17827-2:2016

Solid biofuels — Determination of par-ticle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below

B

TC 257 Evaluation of energy savings

ISO 17743:2016

* Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings

C

TC 265 Carbon dioxide capture, trans-portation, and geological storage

ISO/TR 27912:2016

* Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes

H


ISO/IEC 14651:2016

Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering

F

ISO/IEC/IEEE 8802-22:2015

* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Speci-fications: Policies and Procedures for Operation in the TV Bands

H

ISO/IEC TR 19759:2015

* Software Engineering — Guide to the software engineering body of knowl-edge (SWEBOK)

H

ISO/IEC/IEEE 24748-4:2016

* Systems and software engineering — Life cycle management — Part 4: Systems engineering planning

G

ISO/IEC 7816-15:2016

* Identification cards — Integrated circuit cards — Part 15: Cryptographic infor-mation application

H

ISO/IEC 14443-3:2016

* Identification cards — Contactless integrated circuit cards — Proxim-ity cards — Part 3: Initialization and anticollision

G

ISO/IEC 14443-4:2016

* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol

G

ISO/IEC 18041-4:2016

* Information technology — Computer graphics, image processing and envi-ronmental data representation — En-vironmental Data Coding Specification (EDCS) language bindings — Part 4: C

G

ISO/IEC 11770-3:2015/Cor 1:2016

* Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques — Technical Corrigendum 1

free

ISO/IEC 27033-6:2016

* Information technology — Security techniques — Network security — Part 6: Securing wireless IP network access

D


ISO/IEC 14496-5:2001/Amd 39:2016

* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 39: Ref-erence software for the Multi-resolution Frame Compatible Stereo Coding with Depth Maps of AVC

XZ

ISO/IEC 23008-5:2015/Amd 2:2016

* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding — Amendment 2: Refer-ence Software for the Multiview Main Profile of HEVC

XZ

ISO/IEC 29167-19:2016

* Information technology — Automatic identification and data capture tech-niques — Part 19: Crypto suite RA-MON security services for air interface communications

G

ISO/IEC 13249-1:2016

* Information technology — Data-base languages — SQL multimedia and application packages — Part 1: Framework

C

ISO/IEC TR 29195:2015

* Traveller processes for biometric rec-ognition in automated border control systems

D

ISO/IEC 18384-1:2016

* Information technology — Reference Architecture for Service Oriented Archi-tecture (SOA RA) — Part 1: Terminol-ogy and concepts for SOA

G

ISO/IEC 20933:2016

* Information technology — Distributed Application Platforms and Services (DAPS) — Access Systems

C

Standards confirmed

The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO 281:2007 (reconfirmed)

TC 5 Ferrous metal pipes and metallic fittings


ISO 10804:2010

TC 8 Ships and marine technology






TC 10 Technical product documentation

IEC 82045-1:2001 (reconfirmed)

IEC 82045-2:2004

ISO 11005:2010

TC 22 Road vehicles






ISO 7397-1:1993 (reconfirmed)




ISO/PAS 16898:2012







ISO/TS 16951:2004

(reconfirmed)

TC 27 Solid mineral fuels

ISO 1928:2009

ISO 23873:2010

TC 28 Petroleum products and related prod-ucts of synthetic or biological origin



TC 34 Food products









ISO 3890-1:2009

ISO 3890-2:2009

ISO 11865:2009

ISO 11870:2009


ISO 12080-1:2009

ISO 12080-2:2009

ISO 14378:2009


ISO/TS 6579-2:2012



TC 37 Terminology and other language and content resources



ISO 639-4:2010


TC 38 Textiles

ISO 12952-1:2010

ISO 12952-2:2010

TC 39 Machine tools




TC 46 Information and documentation



TC 63 Glass containers





TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO 15590-2:2003

ISO 15590-3:2004

ISO 13535:2000

ISO 13678:2010

TC 79 Light metals and their alloys

ISO 2128:2010

ISO 6719:2010

ISO 7759:2010

TC 92 Fire safety



TC 120 Leather












ISO 21507:2010

TC 155 Nickel and nickel alloys


TC 161 Control and protective devices for gas and/or oil burners and appliances


TC 163 Thermal performance and energy use in the built environment


TC 171 Document management applications

ISO 29861:2009

TC 173 Assistive products for persons with disability


ISO 24415-1:2009



ISO 10303-46:2011

ISO 13584-20:1998

(reconfirmed)

TC 189 Ceramic tile

ISO 10545-16:2010

TC 190 Soil quality


TC 204 Intelligent transport systems

ISO 17572-2:2015


ISO/IEC 9796-2:2010

ISO/IEC 9798-1:2010

ISO/IEC 9798-4:1999

(reconfirmed)

ISO/IEC 9798-6:2010

ISO/IEC 11770-1:2010

ISO/IEC 13888-2:2010

ISO/IEC 18033-3:2010

Standards withdrawn



ISO 5636-1:1984 (replaced by )

TC 21 Equipment for fire protection and fire fighting

ISO 6790:1986 (replaced by )

TC 34 Food products

ISO/TS 16634-2:2009

(replaced by ISO 16634-2:2016)

ISO/TS 21033:2011

(replaced by ISO 21033:2016)

ISO/TS 21033:2011/Amd 1:2012

(replaced by ISO 21033:2016)

TC 46 Information and documentation

ISO/TR 15489-2:2001

(replaced by )

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO 5347-7:1993 (replaced by ISO 16063-17:2016)


ISO 14660-2:1999 (replaced by ISO 17450-3:2016)


ISO/IEC 26702:2007

(replaced by ISO/IEC/IEEE 24748-4:2016)


Meeting calendar

(update at 01 May 2016)

Meetings called for the month of April are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

June 2016

6-7 Heerbrugg (Switzerland)

TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

6-8 Paris (France) TC 220 Cryogenic vessels

6-9 Rome (Italy) TC 249 Traditional chinese medicine

6-10 Hokaido (Japan) JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques

6-10 London (United Kingdom)

* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols


TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management


TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling


TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results


* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma


TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

7 Winterthur (Switzerland)

TC 5/SC 11 Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints

7-9 Turin (Italy) TC 274 Light and lighting

7-10 Prague (Czech Republic)

TC 156 Corrosion of metals and alloys

9 Aachen (Germany)

TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes

9-10 Seattle (USA) TC 214 Elevating work platforms

9-16 Portland, Oregon (USA)

JTC 1/SC 28 Information technol-ogy/Office equipment

10 Milan (Italy) TC 17/SC 19 Steel/Technical delivery conditions for steel tubes for pres-sure purposes

10 London (United Kingdom)

TC 69 Applications of statis-tical methods

11-17 Malmö (Sweden) * TC 251 Asset management

13 Geneva (Switzerland)

President's committee


13 Stockholm (Sweden)

TC 242 Energy Management

13-17 Memphis (USA) JTC 1/SC 32 Information technolo-gy/Data management and interchange

13-17 Kyoto (Japan) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

13-17 Kyoto (Japan) TC 282/SC 2 Water reuse/Water reuse in urban areas

13-17 Kyoto (Japan) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

13-17 Stockholm (Sweden)

TC 301 Energy management and energy saving

14-17 Ekaterinburg (Russian Federation)

REMCO Committee on refer-ence materials

15-16 Geneva (Switzerland)

TMB Technical Manage-ment Board

15-17 Berlin (Germany) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace

16 Virtual (Unknown)

CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)


COPOLCO Committee on con-sumer policy

16-17 Tromsø (Norway) TC 211 Geographic in-formation/Geomatics

18 Munich (Germany)

TC 135/SC 4 Non-destructive testing/Eddy current methods

18 Munich (Germany)

TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing

19 Munich (Germany)

* TC 135/SC 2 Non-destructive test-ing/Surface methods

19 Munich (Germany)

TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing

19 Munich (Germany)

TC 135/SC 5 Non-destructive testing/Radiation methods

19 Munich (Germany)

TC 135/SC 6 Non-destructive test-ing/Leak detection methods

20 Munich (Germany)

TC 135 Non-destructive testing

20 Munich (Germany)

TC 135/SC 7 Non-destructive testing/Personnel qualification

20 Munich (Germany)

TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing


20-21 Berlin (Germany) TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

20-23 Delft (Netherlands)

TC 272 Forensic sciences

20-24 Frankfurt (Germany)

JTC 1/SC 39 Information technol-ogy/Sustainability for and by Information Technology

20-24 Tedding-ton (United Kingdom)

TC 43/SC 3 Acoustics/Underwa-ter acoustics

20-25 Prague (Czech Republic)

JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

21 Istanbul (Turkey) TC 120 Leather

21 Istanbul (Turkey) TC 120/SC 3 Leather/Leather products

21-22 Düsseldorf (Germany)

TC 17/SC 10 Steel/Steel for pres-sure purposes

21-22 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment

22 Istanbul (Turkey) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts

22-23 Porto (Portugal) TC 17/SC 17 Steel/Steel wire rod and wire products

22-23 Porto (Portugal) TC 269 Railway applications

22-23 Porto (Portugal) TC 269/SC 1 Railway applications/Infrastructure

22-23 Porto (Portugal) TC 269/SC 2 Railway applications/Rolling stock

22-23 Porto (Portugal) * TC 269/SC 3 Railway applica-tions/Operations and services

23 Baltimore (USA) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection

23 Schonach (Germany)

TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

23 Istanbul (Turkey) TC 120/SC 2 Leather/Tanned leather

24 Porto (Portugal) TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets

24 Tokyo (Japan) TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels

27 Nicosia (Cyprus) * TC 193 Natural gas

27-28 Frankfurt (Germany)



TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

29-30 Beijing (China) TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems

30 Geneva (Switzerland)

* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

30 Saskatoon (Canada)

TC 159/SC 1 Ergonomics/General ergonomics principles

June-July 2016

25-1 Copenhagen (Denmark)

TC 37 Terminology and other language and content resources


TC 188 Small craft

27-1 Nicosia (Cyprus) * TC 193/SC 1 Natural gas/Analysis of natural gas

27-1 Nicosia (Cyprus) * TC 193/SC 3 Natural gas/Upstream area

27-1 Hangzhou (China)

TC 268 Sustainable develop-ment in communities


** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

1st Semester 2016

New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

July 2016

5-8 Shanghai (China) TC 8/SC 8 Ships and marine technology/Ship design

7-8 Paris (France) TC 34 Food products

8 Delft (Netherlands)

TC 158 Analysis of gases

14 Tokyo (Japan) TC 261 Additive manufacturing

15 Greenville (USA) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment

22 Seoul (Korea, Republic of)

JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

26-27 Sydney (Australia)

TC 281 Fine Bubble Technology

29 Bologna (Italy) TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation

August 2016

1-5 Seoul (Korea, Republic of)

* JTC 1/SC 35 Information technol-ogy/User interfaces

19 Berlin (Germany) TC 206 Fine ceramics

22-26 Beijing (China) * JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

24 Virtual (Unknown)

* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)


TC 12 Quantities and units


TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

(USA) ** TC 91 Surface active agents

August-September 2016



TC 207 Environmental management

31-1 Berlin (Germany) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

September 2016



5-9 Bilbao (Spain) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

5-9 Edinburgh (Unit-ed Kingdom)

TC 292 Security and resilience

5-10 Changsha (China)

* TC 96/SC 6 Cranes/Mobile cranes



6 Xian (China) * TC 263 Coalbed methane (CBM)

9 Beijing (China) President's committee


10 Beijing (China) TMB Technical Manage-ment Board

10-16 San José, Cali-fornia (USA)

* TC 130 Graphic technology

11 Beijing (China) * COUNCIL Council

11 Beijing (China) DEVCO Committee on devel-oping country matters

11-16 Tromsø (Norway) * TC 106/SC 1 Dentistry/Filling and restorative materials

11-16 Tromsø (Norway) * TC 106/SC 2 Dentistry/Prosthodon-tic materials

11-16 Tromsø (Norway) * TC 106/SC 3 Dentistry/Terminology

11-16 Tromsø (Norway) * TC 106/SC 4 Dentistry/Dental instruments

11-16 Tromsø (Norway) * TC 106/SC 6 Dentistry/Dental equipment

11-16 Tromsø (Norway) ** TC 106/SC 7 Dentistry/Oral care products

11-16 Tromsø (Norway) * TC 106/SC 8 Dentistry/Dental implants

11-16 Tromsø (Norway) * TC 106/SC 9 Dentistry/Dental CAD/CAM systems

12-13 Beijing (China) * GA General Assembly

12-13 Peterbor-ough (United Kingdom)

TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment

12-13 Stavanger (Norway)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

13 Beijing (China) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

13 Beijing (China) ** CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

13 Sao Paulo (Brazil)

TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design

14-16 Peterbor-ough (United Kingdom)

TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

19-20 Xian (China) TC 33 Refractories

19-22 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases

19-23 Berlin (Germany) ** TC 61 Plastics


* TC 150 Implants for surgery

19-25 Melbourne (Australia)

* TC 165 Timber structures

19-30 Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification


* TC 221 Geosynthetics


TC 264 Fireworks

20-22 Yichang (China) ** TC 256 Pigments, dyestuffs and extenders

22-24 Beijing (China) TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

23 Annapolis (USA) TC 194 Biological and clinical evaluation of medical devices

23 Barcelona (Spain)

* TC 254 Safety of amusement rides and amusement devices

26-29 Haarlem (Netherlands)

* TC 157 Non-systemic con-traceptives and STI barrier prophylactics

26-30 San José, Cali-fornia (USA)

JTC 1/SC 2 Information technol-ogy/Coded character sets


** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

26-30 Beijing (China) TC 8 Ships and marine technology

26-30 Burlington, Ver-mont (USA)

** TC 146/SC 3 Air quality/Ambient atmospheres

26-30 Burlington, Ver-mont (USA)

TC 146/SC 6 Air quality/Indoor air

26-30 Berlin (Germany) ** TC 163 Thermal performance and energy use in the built environment

26-30 Berlin (Germany) ** TC 205 Building environment design

26-30 (Canada) ** TC 218 Timber

27 Beijing (China) * TC 8/SC 13 Ships and marine technology/Marine technology

27 Paris (France) TC 17/SC 20 Steel/General techni-cal delivery condi-tions, sampling and mechanical testing methods

27-29 Moscow (Rus-sian Federation)

* TC 232 Learning services outside formal education



* TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels


* TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products

28-30 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables


* TC 28/SC 4 Petroleum products and related prod-ucts of synthetic or biological origin/Classifications and specifications


* TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels

29 Burlington, Ver-mont (USA)

TC 146/SC 2 Air quality/Workplace atmospheres


TC 146/SC 4 Air quality/General aspects

29 Berlin (Germany) TC 266 Biomimetics

29-30 Courbevoie, Paris (France)

TC 17 Steel


TC 28 Petroleum products and related products of synthetic or bio-logical origin

30 Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines


** TC 146/SC 1 Air quality/Stationary source emissions

Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Asia) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

Sao Paulo (Brazil)

** TC 173 Assistive products for persons with disability

Sao Paulo (Brazil)

** TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

Sao Paulo (Brazil)

** TC 209 Cleanrooms and as-sociated controlled environments

Singapore (Singapore)

** TC 260 Human resource management

3rd Quarter 2016

(Turkey) ** TC 34/SC 3 Food products/Fruits and vegetables and their derived products

Seoul (Korea, Republic of)

** TC 92/SC 1 Fire safety/Fire initia-tion and growth

October 2016

2-7 Seattle (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data

2-7 Auckland (New Zealand)

* TC 204 Intelligent transport systems

3-7 Pretoria (South Africa)

* PC 273 Customer contact centres


* TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids


TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

5 Helsinki (Finland) ** TC 82/SC 7 Mining/Mine closure and reclamation management

5-6 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

5-6 Chicago (USA) * TC 105 Steel wire ropes

5-7 Madrid (Spain) * TC 225 Market, opinion and social research

5-10 Berlin (Germany) TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

6 Virtual (Unknown)

* President's committee


6 Tokyo (Japan) * TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

6 Berlin (Germany) TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)

6 Berlin (Germany) TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)

6 Matsue (Japan) TC 183 Copper, lead, zinc and nickel ores and concentrates

6-7 Helsinki (Finland) * TC 82 Mining

6-7 Berlin (Germany) TC 119 Powder metallurgy

7 Berlin (Germany) TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals

10-13 Bucarest (Romania)

* TC 172/SC 1 Optics and photon-ics/Fundamental standards

10-14 Hoffman Estates, Illinois (USA)

* TC 58/SC 2 Gas cylinders/Cylin-der fittings

10-14 Tokyo (Japan) TC 153 Valves

11-12 Beijing (China) * TC 298 Rare earth


* TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement




14 Hangzhou (China)

* TC 70 Internal combustion engines

17-21 Berlin (Germany) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

17-21 Moscow (Rus-sian Federation)

* TC 20 Aircraft and space vehicles


TC 58/SC 3 Gas cylinders/Cylin-der design

17-21 Kyoto (Japan) * TC 138 Plastics pipes, fittings and valves for the transport of fluids

17-21 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration

17-21 Berlin (Germany) * TC 181 Safety of toys

17-21 Amman (Jordan) * TC 262 Risk management

18 Shanghai (China) * TC 2/SC 14 Fasteners/Surface coatings

18-19 Tokyo (Japan) * TC 17/SC 17 Steel/Steel wire rod and wire products

19 Shanghai (China) * TC 2/SC 7 Fasteners/Reference standards

19-21 Philadelphia (USA)

** TC 202 Microbeam analysis

20 Shanghai (China) * TC 2/SC 12 Fasteners/Fasteners with metric internal thread

20 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints

20 (China) ** TC 5/SC 10 Ferrous metal pipes and metallic fittings/Metallic flanges and their joints

20-21 Tokyo (Japan) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete


* TC 58 Gas cylinders

20-21 Vienna (Austria) * TC 227 Springs

21 Shanghai (China) * TC 2/SC 11 Fasteners/Fasteners with metric external thread

21 (China) ** TC 5 Ferrous metal pipes and metallic fittings

22-23 Orlando (USA) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

23-27 Abu Dhabi (United Arab Emirates)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

23-27 Abu Dhabi (United Arab Emirates)


24 Tokyo (Japan) * TC 79/SC 9 Light metals and their alloys/Symbolization

24-26 Tokyo (Japan) ** TC 79/SC 11 Light metals and their alloys/Titanium

24-28 Tokyo (Japan) ** TC 79 Light metals and their alloys

24-28 Tokyo (Japan) ** TC 164 Mechanical testing of metals


* TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

24-28 Saint-Denis (France)

* TC 190/SC 4 Soil quality/Biological methods

24-28 Athens (Greece) * TC 258 Project, programme and portfolio management

25 Tokyo (Japan) * TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots

25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

26 Abu Dhabi (United Arab Emirates)


26-27 Osaka (Japan) * TC 126 Tobacco and tobacco products

26-28 (United Kingdom)

** TC 123 Plain bearings

26-28 Tokyo (Japan) * TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

27 Tokyo (Japan) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

27-28 Orlando (USA) TC 17/SC 12 Steel/Continuous mill flat rolled products

Berlin (Germany) ** TC 59 Buildings and civil engineering works

(Greece) ** TC 180 Solar energy

October-November 2016

30-4 Kuala Lumpur (Malaysia)

** TC 45 Rubber and rubber products


* TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

November 2016

1-4 Arlington (USA) ** TC 22/SC 36 Road vehicles/Safety and impact testing

4 Mainz (Germany) * TC 291 Domestic gas cook-ing appliances


* TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


* TC 241 Road traffic safety management systems


* TC 98 Bases for design of structures

7-12 Lillehammer (Norway)

** JTC 1 Information technology

8-10 Kobe (Japan) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

10-11 Bern (Switzerland)

* TC 34/SC 12 Food products/Sen-sory analysis

13-17 (Norway) ** TC 215 Health informatics


14-15 Toronto (Canada) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

14-18 Toronto (Canada) * TC 44 Welding and allied processes

15-16 Toronto (Canada) * TC 44/SC 7 Welding and allied processes/Represen-tation and terms

15-17 Boulogne sur Mer (France)

* TC 22/SC 39 Road vehicles/Ergonomics

16 Toronto (Canada) * TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

16 Toronto (Canada) * TC 44/SC 9 Welding and allied processes/Health and safety

17 Hiroshima City (Japan)

* TC 244 Industrial furnaces and associated pro-cessing equipment

17-18 Orlando (USA) * TC 299 Robotics

22-24 Christchurch (New Zealand)

** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements


* TC 281 Fine Bubble Technology

(China) ** TC 134 Fertilizers and soil conditioners

Tel Aviv (Israel) ** TC 282 Water reuse

Tel Aviv (Israel) ** TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

Tel Aviv (Israel) ** TC 282/SC 2 Water reuse/Water reuse in urban areas

Tel Aviv (Israel) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

November-December 2016

9-1 Tokyo (Japan) * PC 294 Guidance on unit pricing

December 2016

1-2 Sapporo (Japan) * TC 265 Carbon dioxide capture, transporta-tion, and geological storage


* TC 217 Cosmetics

6-9 Dublin (Ireland) * TC 275 Sludge recovery, recycling, treatment and disposal

8-9 Petten (Netherlands)

TC 197 Hydrogen technologies

9 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

4th Quarter 2016

(India) ** TC 113 Hydrometry

2nd Semester 2016

(Europe) ** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

(Europe) ** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

(Europe) ** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Florence (Italy) ** TC 160 Glass in building

Florence (Italy) ** TC 160/SC 1 Glass in build-ing/Product considerations

Florence (Italy) ** TC 160/SC 2 Glass in building/Use considerations

January 2017

16-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings

February 2017

6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces

6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

22-23 Kuala Lumpur (Malaysia)

** TMB Technical Manage-ment Board

March 2017

6 Kyoto (Japan) ** TC 60 Gears


** COUNCIL Council

27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

1st Quarter 2017

(Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

April 2017

3-4 Chicago (USA) * TC 117 Fans

10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

18-22 Hamilton (New Zealand)


24-25 Hamilton (New Zealand)


26 Milan (Italy) * TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

(Unknown) ** TC 34/SC 15 Food products/Coffee

(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa

Hangzhou (China)

** TC 215 Health informatics

May 2017

8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information


* TC 10 Technical product documentation


8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

8-12 Berlin (Germany) ** TC 171 Document manage-ment applications

15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies

15-19 Washington, D.C (USA)

* TC 4 Rolling bearings

15-19 Seattle (USA) * TC 31 Tyres, rims and valves

15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

18 Jeju (Korea, Republic of)

* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

22-26 Pretoria (South Africa)

* TC 46/SC 4 Information and documentation/Tech-nical interoperability

22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines

Stockholm (Sweden)

** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

May-June 2017

27-2 (Ireland) ** TC 238 Solid biofuels


** TC 145 Graphical symbols

June 2017


** TMB Technical Manage-ment Board

19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology

19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(USA) ** TC 42 Photography

2nd Quarter 2017

Tsukuba (Japan) ** TC 92 Fire safety

July 2017

24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces

(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

September 2017

11-15 Chicago (USA) * JTC 1/SC 32 Information technolo-gy/Data management and interchange

11-15 San Francisco (USA)

* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

18 Berlin (Germany) * COUNCIL Council

19 Berlin (Germany) ** TMB Technical Manage-ment Board

20-22 Berlin (Germany) ** GA General Assembly

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

Vienna (Austria) ** TC 165 Timber structures

(Japan) ** TC 213 Dimensional and geometrical product specifications and verification

(Nigeria) ** TC 260 Human resource management

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

8 New Orleans (USA)

* TC 38 Textiles

9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks

11 New Orleans (USA)

* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants


* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 38/SC 23 Textiles/Fibres and yarns


* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

22-27 Hawaii (USA) * TC 45 Rubber and rubber products

23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

November 2017


(India) ** TC 54 Essential oils

London (United Kingdom)

** TC 215 Health informatics

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Erlangen (Germany)

** TC 36 Cinematography

(South Africa) ** TC 46 Information and documentation

(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(United Kingdom)

** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

(USA) ** TC 198 Sterilization of health care products

Milan (Italy) ** TC 206 Fine ceramics

February 2018

12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

1st Quarter 2018

(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces

June 2018

(Korea, Repub-lic of)

** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

September 2018

(Japan) ** TC 61 Plastics

3rd Quarter 2018

(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces

(Netherlands) ** TC 92 Fire safety

October 2018

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Documents

ISO Update · ISO Update, Supplement to ISO Focus -- June 2016 3. ISO 7010:2011/CD Amd 232 Graphical symbols — Safety colours and safety signs — …