Upload
dinhhanh
View
242
Download
0
Embed Size (px)
Citation preview
Standards published
New International Standards published between 01 September and 30 September 2016
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO 14272:2016
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
B
TC 6 Paper, board and pulps
ISO 2470-1:2016
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)
B
TC 8 Ships and marine technology
ISO 19356:2016 * Ships and marine technology — Marine cranes — Test specifications and procedures A
ISO 22472:2016 * Ships and marine technology — Guidelines for the operation and installation of voyage data recorder (VDR)
F
TC 10 Technical product documentation
ISO 9177-1:2016
Mechanical pencils for technical drawings — Part 1: Classification, dimensions, perfor-mance requirements and testing
B
TC 20 Aircraft and space vehicles
ISO 17851:2016 * Space systems — Space environment simulation for material tests — General principles and criteria
D
TC 21 Equipment for fire protection and fire fighting
ISO 14520-2:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant
A
ISO 14520-5:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant
B
ISO 14520-6:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 6: HCFC Blend A extinguishant
B
ISO 14520-8:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant
B
ISO 14520-9:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant
B
ISO 14520-10:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant
B
ISO 14520-11:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 11: HFC 236fa extinguishant
B
TC 22 Road vehicles
ISO 19365:2016 * Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability con-trol testing
B
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 3924:2016
Petroleum products — Determination of boiling range distribution — Gas chromatography method
D
TC 29 Small tools
ISO 8051:2016
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
A
ISO 10898:2016
Spot drills A
TC 34 Food products
ISO 12824:2016
Royal jelly — Specifications E
TC 38 Textiles
ISO 1144:2016
Textiles — Universal system for designating linear density (Tex System) B
TC 44 Welding and allied processes
ISO 3677:2016
Filler metal for soldering and brazing — Designation A
ISO 17672:2016
Brazing — Filler metals D
ISO 20168:2016
Resistance welding — Locking tapers for electrode holders and electrode caps A
TC 45 Rubber and rubber products
ISO 1827:2016
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
B
ISO 6235:2016
Rubber, raw — Determination of block polystyrene content — Ozonolysis method
A
ISO 2286-1:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Meth-ods for determination of length, width and net mass
A
ISO 2286-2:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Meth-ods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
A
ISO 2286-3:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
A
TC 61 Plastics
ISO 11469:2016
Plastics — Generic identification and marking of plastics products A
ISO 11357-1:2016
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles E
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 14224:2016 * Petroleum, petrochemical and natural gas industries — Collection and exchange of reliabil-ity and maintenance data for equipment
H
ISO 16961:2015
Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
F
ISO 20088-1:2016 * Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase
D
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8536-13:2016
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
A
TC 83 Sports and other recreational facilities and equipment
ISO 23537-1:2016
Requirements for sleeping bags — Part 1: Thermal and dimensional requirements D
ISO 23537-2:2016
Requirements for sleeping bags — Part 2: Fabric and material properties A
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 16645:2016 * Radiological protection — Medical electron accelerators — Requirements and recommen-dations for shielding design and evaluation
G
TC 87 Cork
ISO 2190:2016
Granulated cork — Determination of moisture content A
TC 92 Fire safety
ISO/TS 19700:2016 * Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
F
TC 94 Personal safety -- Protective clothing and equipment
ISO/TS 16975-2:2016
Respiratory protective devices — Selection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme
C
TC 96 Cranes
ISO 4302:2016
Cranes — Wind load assessment D
TC 106 Dentistry
ISO 17509:2016
Dentistry — Torque transmitter for handpieces A
TC 107 Metallic and other inorganic coatings
ISO 19207:2016
Thermal spraying — Classification method of adhesive strength by indentation C
ISO 19477:2016
Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barri-er coatings by beam bending
C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10815:2016
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
D
ISO/TS 14837-32:2015
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
G
TC 110 Industrial trucks
ISO 10896-7:2016 * Rough-terrain trucks — Safety requirements and verification — Part 7: Longitudinal load moment systems
B
TC 113 Hydrometry
ISO 6420:2016 * Hydrometry — Position fixing equipment for hydrometric boats B
TC 121 Anaesthetic and respiratory equipment
ISO 5366:2016
Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors D
TC 123 Plain bearings
ISO 12131-2:2016 * Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings
B
ISO 12167-1:2016 * Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
E
ISO 20054:2016 * Plain bearings — Bearings containing dispersed solid lubricants
B
TC 127 Earth-moving machinery
ISO 9244:2008/Amd 1:2016
Earth-moving machinery — Machine safety labels — General principles — Amendment 1
XZ
TC 131 Fluid power systems
ISO 1219-3:2016 * Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
D
ISO/TS 11672:2016 * Connectors for fluid power and general use — Designation and nomenclature C
TC 150 Implants for surgery
ISO 13779-6:2015
Implants for surgery — Hydroxyapatite — Part 6: Powders B
ISO 7206-2:2011/Amd 1:2016
Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials — Amendment 1
XZ
ISO 7206-12:2016
Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells
B
ISO 14242-2:2016
Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measure-ment
A
ISO 14243-2:2016
Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measure-ment
A
TC 159 Ergonomics
ISO 6385:2016
Ergonomics principles in the design of work systems C
TC 164 Mechanical testing of metals
ISO 27306:2016 * Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
F
TC 165 Timber structures
ISO 18402:2016 * Timber structures — Structural insulated panel roof construction — Test methods D
TC 172 Optics and photonics
ISO 10938:2016
Ophthalmic optics — Chart displays for visual acuity measurement — Printed, projected and electronic
A
ISO 11381:2016
Ophthalmic optics — Spectacle frames — Screw threads A
TC 180 Solar energy
ISO 22975-1:2016
Solar energy — Collector components and materials — Part 1: Evacuated tubes — Durabil-ity and performance
E
ISO 22975-2:2016
Solar energy — Collector components and materials — Part 2: Heat-pipes for solar thermal application — Durability and performance
D
TC 182 Geotechnics
ISO 22477-10:2016 * Geotechnical investigation and testing — Testing of geotechnical structures — Part 10: Testing of piles: rapid load testing
D
TC 184 Automation systems and integration
ISO 8000-100:2016 * Data quality — Part 100: Master data: Exchange of characteristic data: Overview C
ISO 8000-120:2016 * Data quality — Part 120: Master data: Exchange of characteristic data: Provenance D
ISO 8000-130:2016 * Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy B
ISO 8000-140:2016 * Data quality — Part 140: Master data: Exchange of characteristic data: Completeness B
TC 199 Safety of machinery
ISO/TR 22100-3:2016 * Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonom-ic principles in safety standards
F
TC 201 Surface chemical analysis
ISO 15471:2016 * Surface chemical analysis — Auger electron spectroscopy — Description of selected in-strumental performance parameters
A
ISO 17973:2016 * Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibra-tion of energy scales for elemental analysis
B
TC 204 Intelligent transport systems
ISO 18495-1:2016 * Intelligent transport systems — Commercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions
D
ISO 19079:2016 * Intelligent transport systems — Communications access for land mobiles (CALM) — 6LoWPAN networking
D
TC 206 Fine ceramics
ISO 18610:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determina-tion of elastic properties by ultrasonic technique
D
TC 209 Cleanrooms and associated controlled environments
ISO 14644-14:2016
Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration
D
TC 211 Geographic information/Geomatics
ISO 19104:2016 * Geographic information — Terminology H
ISO 19160-1:2015
Addressing — Part 1: Conceptual model G
TC 213 Dimensional and geometrical product specifications and verification
ISO 10360-12:2016
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordi-nate measuring systems (CMS) — Part 12: Articulated arm coordinate measurement ma-chines (CMM)
F
ISO 18391:2016
Geometrical product specifications (GPS) — Population specification C
TC 215 Health informatics
ISO/IEEE 11073-10418:2014/Cor 1:2016
* Health informatics — Personal health device communication — Part 10418: Device special-ization — International Normalized Ratio (INR) monitor — Technical Corrigendum 1
free
TC 220 Cryogenic vessels
ISO 21028-1:2016
Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
B
TC 228 Tourism and related services
ISO 17679:2016 * Tourism and related services — Wellness spa — Service requirements C
TC 229 Nanotechnologies
ISO/TR 16196:2016 * Nanotechnologies — Compilation and description of sample preparation and dosing meth-ods for engineered and manufactured nanomaterials
C
TC 244 Industrial furnaces and associated processing equipment
ISO 13577-1:2016 * Industrial furnaces and associated processing equipment — Safety — Part 1: General re-quirements
F
ISO 13577-3:2016 * Industrial furnaces and associated processing equipment — Safety — Part 3: Generation and use of protective and reactive atmosphere gases
G
TC 257 Evaluation of energy savings
ISO 17743:2016
Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings
C
TC 266 Biomimetics
ISO 18457:2016 * Biomimetics — Biomimetic materials, structures and components F
TC 274 Light and lighting
ISO/CIE 11664-5:2016
Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
B
TC 299 Robotics
ISO 18646-1:2016
Robotics — Performance criteria and related test methods for service robots — Part 1: Locomotion for wheeled robots
C
JTC 1 Information technology
ISO/IEC TS 33072:2016 * Information technology — Process assessment — Process capability assessment model for information security management
H
ISO/IEC 27036-4:2016 * Information technology — Security techniques — Information security for supplier relation-ships — Part 4: Guidelines for security of cloud services
D
ISO/IEC 23003-3:2012/Cor 3:2015
* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Corrigendum 3
free
ISO/IEC 15459-1:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 1: Individual transport units
B
ISO/IEC 15459-4:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 4: Individual products and product packages
B
ISO/IEC 15459-5:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 5: Individual returnable transport items (RTIs)
B
ISO/IEC 15459-6:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 6: Groupings
B
ISO/IEC 9995-9:2016
Information technology — Keyboard layouts for text and office systems — Part 9: Multi-lingual, multiscript keyboard layouts
H
ISO/IEC 19794-5:2005 * Information technology — Biometric data interchange formats — Part 5: Face image data H
ISO/IEC 29794-1:2016 * Information technology — Biometric sample quality — Part 1: Framework D
ISO/IEC 19086-1:2016 * Information technology — Cloud computing — Service level agreement (SLA) framework — Part 1: Overview and concepts
E
ISO/IEC TR 30132-1:2016 * Information technology — Information technology sustainability — Energy efficient compu-ting models — Part 1: Guidelines for energy effectiveness evaluation
D
ISO/IEC TR 38504:2016 * Governance of information technology — Guidance for principles-based standards in the governance of information technology
B
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4 Rolling bearings
ISO/TS 16281:2008 (reconfirmed)
ISO 20516:2007 (reconfirmed)
TC 6 Paper, board and pulps
ISO 5350-3:2007 (reconfirmed)
ISO 10376:2011
ISO 17812:2007 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 2315:1980 (reconfirmed)
ISO 8056-1:1985 (reconfirmed)
ISO 11893:2011
ISO 17566:2011
TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-11:2011
ISO 11783-13:2011
TC 24 Particle characterization including sieving
ISO 13318-2:2007 (reconfirmed)
ISO 13319:2007 (reconfirmed)
ISO 13322-2:2006 (reconfirmed)
ISO 14488:2007 (reconfirmed)
ISO 14887:2000 (reconfirmed)
ISO 15901-2:2006 (reconfirmed)
TC 29 Small tools
ISO 3002-5:1989 (reconfirmed)
ISO 13399-1:2006 (reconfirmed)
ISO 297:1988 (reconfirmed)
ISO 1080:1975 (reconfirmed)
ISO 5415:2007 (reconfirmed)
ISO 7388-1:2007 (reconfirmed)
ISO 7388-2:2007 (reconfirmed)
ISO 8486-1:1996 (reconfirmed)
ISO 15635:2001 (reconfirmed)
ISO 16057:2002 (reconfirmed)
ISO 21948:2001 (reconfirmed)
ISO 21949:2001 (reconfirmed)
ISO 21950:2001 (reconfirmed)
ISO 21951:2001 (reconfirmed)
TC 33 Refractories
ISO 20182:2008 (reconfirmed)
ISO 21078-1:2008 (reconfirmed)
ISO 26845:2008 (reconfirmed)
TC 34 Food products
ISO 3720:2011
ISO 11287:2011
ISO 5510:1984 (reconfirmed)
ISO 6490-1:1985 (reconfirmed)
ISO 6493:2000 (reconfirmed)
ISO 6866:1985 (reconfirmed)
ISO 6867:2000 (reconfirmed)
ISO 7088:1981 (reconfirmed)
ISO 14181:2000 (reconfirmed)
ISO 14565:2000 (reconfirmed)
TC 38 Textiles
ISO 9073-9:2008 (reconfirmed)
ISO 9073-16:2007 (reconfirmed)
ISO 2:1973 (reconfirmed)
TC 41 Pulleys and belts (including veebelts)
ISO 22721:2007 (reconfirmed)
TC 43 Acoustics
ISO/TS 13473-4:2008
TC 44 Welding and allied processes
ISO 865:1981 (reconfirmed)
ISO 1089:1980 (reconfirmed)
ISO 5184:1979 (reconfirmed)
ISO 5828:2001 (reconfirmed)
ISO 5829:1984 (reconfirmed)
ISO 5830:1984 (reconfirmed)
ISO 6210-1:1991 (reconfirmed)
ISO 7286:1986 (reconfirmed)
ISO 7931:1985 (reconfirmed)
ISO 15609-5:2011
ISO 17654:2011
TC 45 Rubber and rubber products
ISO 188:2011
TC 60 Gears
ISO 54:1996 (reconfirmed)
ISO 678:1976 (reconfirmed)
ISO 21771:2007 (reconfirmed)
TC 61 Plastics
ISO 62:2008 (reconfirmed)
ISO 291:2008 (reconfirmed)
ISO 2578:1993 (reconfirmed)
ISO 10640:2011
ISO 16869:2008 (reconfirmed)
ISO 22196:2011
ISO 294-3:2002 (reconfirmed)
ISO 1209-1:2007 (reconfirmed)
ISO 8873-1:2006
ISO 8873-2:2007
ISO 20393:2007 (reconfirmed)
TC 83 Sports and other recreational facilities and equipment
ISO 7794:2011
ISO 10228:2011
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 11933-3:1998 (reconfirmed)
ISO 20785-2:2011
TC 89 Wood-based panels
ISO 12466-2:2007 (reconfirmed)
TC 91 Surface active agents
ISO 456:1973 (reconfirmed)
ISO 457:1983 (reconfirmed)
ISO 607:1980 (reconfirmed)
ISO 672:1978 (reconfirmed)
ISO 673:1981 (reconfirmed)
ISO 684:1974 (reconfirmed)
ISO 685:1975 (reconfirmed)
ISO 697:1981 (reconfirmed)
ISO 862:1984 (reconfirmed)
ISO 893:1989 (reconfirmed)
ISO 894:1977 (reconfirmed)
ISO 895:1977 (reconfirmed)
TC 94 Personal safety -- Protective clothing and equipment
ISO/TS 16976-7:2013
ISO/TS 16976-8:2013
TC 106 Dentistry
ISO 9917-1:2007 (reconfirmed)
ISO 10451:2010
TC 107 Metallic and other inorganic coatings
ISO 9588:2007 (reconfirmed)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 5349-1:2001 (reconfirmed)
ISO 5349-2:2001 (reconfirmed)
ISO 9996:1996 (reconfirmed)
ISO 10227:1996 (reconfirmed)
ISO 13091-1:2001 (reconfirmed)
ISO 15230:2007 (reconfirmed)
ISO 18436-1:2012
TC 113 Hydrometry
ISO 3846:2008 (reconfirmed)
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-10:2011
TC 126 Tobacco and tobacco products
ISO/TS 7821:2005 (reconfirmed)
TC 127 Earth-moving machinery
ISO 3411:2007 (reconfirmed)
ISO 5353:1995 (reconfirmed)
ISO 11112:1995 (reconfirmed)
ISO 4510-1:1987 (reconfirmed)
ISO 6012:1997 (reconfirmed)
ISO 6302:1993 (reconfirmed)
ISO 7129:1997 (reconfirmed)
ISO 7852:1983 (reconfirmed)
ISO 8152:1984 (reconfirmed)
ISO 8925:1989 (reconfirmed)
ISO 9247:1990 (reconfirmed)
ISO 15143-1:2010
ISO/TS 15998-2:2012
ISO 22448:2010
TC 130 Graphic technology
ISO 12640-4:2011
TC 134 Fertilizers and soil conditioners
ISO 7837:1992 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 18373-2:2008 (reconfirmed)
TC 145 Graphical symbols
ISO 3864-1:2011
TC 147 Water quality
ISO 5667-13:2011
ISO 5667-23:2011
TC 150 Implants for surgery
ISO 7206-1:2008 (reconfirmed)
ISO 7207-2:2011
ISO 5835:1991 (reconfirmed)
TC 156 Corrosion of metals and alloys
ISO 8565:2011
ISO 11846:1995 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 18292:2011
TC 164 Mechanical testing of metals
ISO 13314:2011
TC 172 Optics and photonics
ISO 9211-3:2008 (reconfirmed)
TC 184 Automation systems and integration
ISO/TS 10303-436:2006 (reconfirmed)
TC 190 Soil quality
ISO 11464:2006 (reconfirmed)
ISO 18287:2006 (reconfirmed)
ISO 22892:2006 (reconfirmed)
TC 201 Surface chemical analysis
ISO 28600:2011
TC 206 Fine ceramics
ISO 10677:2011
ISO 13124:2011
ISO 15490:2008 (reconfirmed)
TC 207 Environmental management
ISO 14040:2006 (reconfirmed)
ISO 14044:2006 (reconfirmed)
TC 209 Cleanrooms and associated controlled environments
ISO 14644-4:2001 (reconfirmed)
TC 211 Geographic information/Geomatics
ISO 19132:2007 (reconfirmed)
TC 213 Dimensional and geometrical product specifications and verification
ISO 8015:2011
ISO/TS 8062-2:2013
ISO 10360-7:2011
ISO 14253-2:2011
ISO 14253-3:2011
ISO 16610-21:2011
ISO/TS 17863:2013
ISO/TS 23165:2006 (reconfirmed)
TC 219 Floor coverings
ISO 10965:2011
TC 220 Cryogenic vessels
ISO 21011:2008 (reconfirmed)
ISO 21013-2:2007 (reconfirmed)
TC 221 Geosynthetics
ISO 10769:2011
ISO 10773:2011
TC 226 Materials for the production of primary aluminium
ISO 2828:1973 (reconfirmed)
ISO 2829:1973 (reconfirmed)
ISO 2830:1973 (reconfirmed)
ISO 2865:1973 (reconfirmed)
ISO 2927:1973 (reconfirmed)
ISO 6999:1983 (reconfirmed)
ISO 15906:2007 (reconfirmed)
ISO 21687:2007 (reconfirmed)
TC 256 Pigments, dyestuffs and extenders
ISO 3262-12:2001 (reconfirmed)
ISO 3262-22:2001 (reconfirmed)
TC 292 Security and resilience
ISO 28003:2007 (reconfirmed)
JTC 1 Information technology
ISO/IEC 16262:2011
ISO/IEC 10995:2011
ISO/IEC 12862:2011
ISO/IEC 7942-3:1999 (reconfirmed)
ISO/IEC 7942-4:1998 (reconfirmed)
ISO/IEC 8632-1:1999 (reconfirmed)
ISO/IEC 8632-3:1999 (reconfirmed)
ISO/IEC 8632-4:1999 (reconfirmed)
ISO 8651-1:1988 (reconfirmed)
ISO 8651-2:1988 (reconfirmed)
ISO 8651-3:1988 (reconfirmed)
ISO/IEC 8651-4:1995 (reconfirmed)
ISO 8805:1988 (reconfirmed)
ISO/IEC 9593-1:1990 (reconfirmed)
ISO/IEC 9593-3:1990 (reconfirmed)
ISO/IEC 9593-4:1991 (reconfirmed)
ISO/IEC 9636-1:1991 (reconfirmed)
ISO/IEC 9636-2:1991 (reconfirmed)
ISO/IEC 9636-3:1991 (reconfirmed)
ISO/IEC 9636-4:1991 (reconfirmed)
ISO/IEC 9636-5:1991 (reconfirmed)
ISO/IEC 9636-6:1991 (reconfirmed)
ISO/IEC 10641:1993 (reconfirmed)
ISO/IEC 12087-1:1995 (reconfirmed)
ISO/IEC 12087-3:1995 (reconfirmed)
ISO/IEC 12087-5:1998 (reconfirmed)
ISO/IEC 12088-4:1995 (reconfirmed)
ISO/IEC 14478-1:1998 (reconfirmed)
ISO/IEC 14478-2:1998 (reconfirmed)
ISO/IEC 14478-3:1998 (reconfirmed)
ISO/IEC 14478-4:1998 (reconfirmed)
ISO/IEC 14165-115:2006 (reconfirmed)
ISO/IEC 14165-131:2000 (reconfirmed)
ISO/IEC 14165-211:1999 (reconfirmed)
ISO/IEC 24702:2006 (reconfirmed)
ISO/IEC 18050:2006 (reconfirmed)
ISO/IEC 29103:2011
ISO/IEC TS 13249-7:2013
ISO/IEC 14957:2010
ISO/IEC 19502:2005 (reconfirmed)
ISO/IEC 19503:2005 (reconfirmed)
ISO/IEC 19756:2011
ISO/IEC 13066-1:2011
ISO/IEC 19788-2:2011
ISO/IEC 19784-4:2011
ISO/IEC 19795-1:2006 (reconfirmed)
ISO/IEC 19795-5:2011
ISO/IEC 19795-7:2011
ISO/IEC 24709-3:2011
ISO/IEC 29109-10:2010
Standards withdrawn
Period from 01 September to 30 September 2016
TC 22 Road vehicles
ISO 8820-7:2007 (replaced by )
TC 106 Dentistry
ISO/TR 11175:1993 (replaced by )
TC 184 Automation systems and integration
ISO/TS 8000-100:2009 (replaced by ISO 8000-100:2016)
ISO/TS 8000-120:2009 (replaced by ISO 8000-120:2016)
ISO/TS 8000-130:2009 (replaced by ISO 8000-130:2016)
ISO/TS 8000-140:2009 (replaced by ISO 8000-140:2016)
TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)
ISO 14661:2000/Amd 1:2002 (replaced by )
TC 211 Geographic information/Geomatics
ISO/TS 19104:2008 (replaced by ISO 19104:2016)