Upload
erdinc-klima
View
202
Download
0
Tags:
Embed Size (px)
Citation preview
CoolingRack cooling
804 Rittal Catalogue 32/IT Solutions
B
5.5
Coo
ling
Horizontal ventilation A high air throughput, stylish design and outstanding security are provided by the doors (with 78 % free surface area per door) of the server racks,see page 777.
Vertical ventilation Ventilation plinth, roof ventilation and slotted component shelves ensure heat dissipation,see page 892, 701, 1013.
Air baffle systemCool air from the hollow base is routed over the base/plinth and distributed via the door in a targeted manner, see page 702.
Passive cooling (use of the ambient air) The air is cooled via the regular ambient air or via the building’s air-conditioning system and it is then routed into the raised floor for rack cooling.
Fan roofsVarious designs and outputs, extendible with fan kits. Fast assembly tailored to racks, see page 703.
Roof-mounted fan Quiet performance (1500 m3/h) for office applications. Centrifugal fan/rack-mounted fan, see page 702.
Fan cross memberFor the perforated door of TS 8 server racks. Air throughput of up to 1200 m3/h, see page 706.
Active cooling (use of the ambient air) Fan systems for active cooling amplify the air exchange inside the rack and use ambient air for cooling.
Active, rack-related cooling By contrast, rack-specific, active cooling is capable of reducing the interior temperature of the rack to below the ambient tem-perature. This cooling technique is very effective with an appro-priate room volume and in industrial environments.
Roof-mounted cooling unit (office application)Useful cooling output 1100 W at an extremely low noise level,see page 638.
Rack-mounted cooling units 482.6 mm (19″)Useful cooling output 1000 W, simple installation in the 482.6 mm (19″) level,see page 698.
Air/water heat exchangersThese prevent the installation room from heating up. A link to a recooling system as cold water supply is essential, see page 676.
When climate control and ventilation are ideal, computing
processes are able to run efficiently. This means uninter-
rupted data flows, which in turn translates into non-stop
productivity. Further information can be found under
“System climate control”, see page 629.
0˚
8
79
5
12
1
2
1
6
10
4
3
11
CoolingHigh-performance cooling
805Rittal Catalogue 32/IT Solutions
Coo
ling
B
5.5
Everything from a single source: RimatriX5 IT cooling systems offer the high performance of comprehensive system inte-gration. This also includes a complete pipeline network.
Recooling systems in a redundant design
Distributor and (where applicable) pump station
Data centre
LCP air/water heat exchangers for dissipating high heat loads
Twin pump unit for redundant operation
Free Cooling – saves energy by using cool external air
Cooling medium buffer store
Water/water heat exchanger
Emergency water supply
Use of the waste heat (district heat, process heat)
Computer Room Air Conditioner (CRAC)
Central control and moni-toring of all components
1
2
3
4
5
6
7
8
9
10
11
12
Modular climate control concepts – to your specific
requirements!
Rittal solves the problem of climate control for high heat
losses per rack with liquid cooling components. Extremely
high heat loads are dissipated from the enclosures, IT and
server racks via air/water heat exchangers. Additionally, data
centres may be extended in a temperature-neutral way.
Emergency water supply
Heat recovery
Water/water heat exchanger, see page 685.
Recooling system, see page 656.
Control Distribution
Free Cooling
LCP Standard, see page 727.
LCP Plus, see page 727.
LCP Extend, see page 727.