ëJ^ ûË÷Ë=ú59¯O7éd O cø·a${>`£ôT(]Êa°NàQñ ¼VDÿéwö ð/%£ñÚâ ... · 4 Operating Instructions – MOVITRANS® TAS10A Transformer Module 1 Important Notes 1 Important

$Page 1: ëJ^ ûË÷Ë=ú59¯O7éd O cø·a${>`£ôT(]Êa°NàQñ ¼VDÿéwö ð/%£ñÚâ ... · 4 Operating Instructions – MOVITRANS® TAS10A Transformer Module 1 Important Notes 1 Important$
Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services

Stationary Energy SupplyMOVITRANS® TAS10A Transformer Module

Operating Instructions

GC430000

Edition 09/200411306912 / EN

SEW-EURODRIVE – Driving the world

Operating Instructions – MOVITRANS® TAS10A Transformer Module 3

Contents

1 Important Notes................................................................................................. 4

2 Safety Notes ...................................................................................................... 6

3 Installation ......................................................................................................... 73.1 Type designation, nameplates and scope of supply ................................. 73.2 Unit design size 2 (TAS10A040) ............................................................... 93.3 Unit design size 4 (TAS10A160) ............................................................. 103.4 Connection conductor rails size 4 (TAS10A160 and TPS10A160) ......... 113.5 Assembly and installation notes.............................................................. 123.6 UL compliant installation ......................................................................... 143.7 Wiring diagram, size 2 (TAS10A040)...................................................... 153.8 Wiring diagram, size 4 (TAS10A160)...................................................... 163.9 Wiring diagram for connecting a line conductor to TAS10A040.............. 183.10 Wiring diagram for connecting a line conductor to TAS10A160.............. 193.11 Installing compensation capacitors in TAS10A....................................... 21

4 Operation and Service .................................................................................... 304.1 Electronics service .................................................................................. 30

5 Technical Data................................................................................................. 315.1 General information ................................................................................ 315.2 Unit data.................................................................................................. 315.3 Compensation capacitors........................................................................ 325.4 Dimensions ............................................................................................. 32

6 Index................................................................................................................. 34

Pi

fkVA

Hz

n

4

1 mportant Notes

Betriebsanleitung1 Important NotesSafety and warning notes

Always observe the safety and warning instructions in this publication!

A requirement of fault-free operation and fulfillment of any rights to claim under limit-ed warranty is that you adhere to the information in the operating instructions. Readthe operating instructions before you start operating the unit!

The operating instructions contain important information about service and shouldbe kept in the vicinity of the unit.

Designated use

The MOVITRANS® TAS10A transformer module is a device for stationary installation incontrol cabinets. Observe all instructions on the technical data and the permitted condi-tions where the unit is operated.

Do not start up the unit (take it into operation in the designated fashion) until you haveestablished that the machine complies with the EMC Directive 89/336/EEC and that theconformity of the end product has been determined in accordance with the MachineryDirective 89/392/EEC (with reference to EN 60204).

The rules and regulations of the Professional Association (Berufsgenossenschaft, BG),in particular BG rule B11 "Electromagnetic fields", must be observed during installation,startup and operation of systems with contactless energy transfer by induction for usein industrial workplaces.

Hazard Possible consequences: Severe or fatal injuries.

Hazardous situationPossible consequences: Slight or minor injuries.

Harmful situationPossible consequences: Damage to the drive and the environment.

Tips and useful information.

The MOVITRANS® TAS10A transformer module is intended for use in industrial andcommercial systems for the operation of contactless (proximity-type) power transmis-sion systems. MOVITRANS® TAS10A may only be operated with the MOVITRANS®

TPS10A stationary converter.

I

Operating Instructions – MOVITRANS® TAS10A Transformer Module

1Important Notes

Operational environment

The following uses are forbidden, unless measures are expressly taken to makethem possible:

Waste disposal Please follow the latest instructions: Dispose of the following materials in accordancewith the regulations in force:

• Electronics scrap (circuit boards)

• Plastic (housing)

• Sheet metal

• Copper

etc.

• In explosion-proof areas

• In areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.

• In non-stationary applications with mechanical vibration and shock loads exceedingthe values stipulated in EN 50178.

5

6

2 afety Notes

2 Safety NotesInstallation and startup

• Never install damaged products or take them into operation. Submit a complaintto the shipping company immediately in the event of damage.

• Installation, startup and service work to be executed by trained personnel onlyobserving applicable accident prevention guidelines and the regulations in force (e.g.EN 60204, VBG 4, DIN-VDE 0100/0113/0160).

• Follow the specific instructions during installation and startup of the other com-ponents!

• The unit meets all requirements for safe disconnection of power and electronicsconnections in accordance with EN 50178. All connected circuits must also satisfythe requirements for safe disconnection.

• Take appropriate measures (for example, connect binary input DIØØ"/CONTROLLER INHIBIT" on the TPS10A stationary converter to DGND) to ensurethat the system does not startup unintentionally when the power is switched on.

Operation and service

• Before removing the protective cover, disconnect the TPS10A and TAS10Aunits from the supply system. Dangerous voltages may still be present for up to10 minutes after disconnection from the power supply source.

• When the unit is switched on, dangerous voltages are present at the outputterminals as well as any connected cables and terminals. This is also the casewhen the TPS10A stationary converter is inhibited.

• The fact that the operation LED V1 and other display elements are no longer illumi-nated on the TPS10A stationary converter does not indicate that the TPS10A andTAS10A units have been disconnected from the power supply and do not carry anyvoltage.

• Ensure that preventive measures and protection devices apply with theapplicable regulations (e.g. EN 60204 or EN 50178).

Required preventive measures: Grounding the unit

• The unit has IP00 enclosure with removed cover and dangerous voltages arepresent at all subassemblies. The unit must be closed during operation.

• Safety functions within the unit may cause system standstill. Removing thesource of the malfunction or performing a reset can result in an automatic restartof the system. If safety reasons prohibit this action, disconnect the TPS10A andTAS10A units from the power supply before correcting the fault.

S


3Type designation, nameplates and scope of supplyInstallation

3 Installation3.1 Type designation, nameplates and scope of supply

Sample type designation

T A S 10 A 160 - N 0 6 - 4 X 1 - 1

Version: 1 = customized

Connection type: 1 = single phase

without meaning

Connection voltage: 4 = primary voltage 400 VAC

Line conductor current: 6 = 60 A / 8 = 85 A

Type of cooling: 0 = without heat sink

Enclosure: N = IP10 enclosure

Rated power: 040 = 4 kW / 160 = 16 kW

Version:

Series and generation: 10 = standard

Type of installation: S = stationary

Component: A = transformer module

Type: T = MOVITRANS®

7

8

3 ype designation, nameplates and scope of supplynstallation

Sample name-plate

The nameplate is attached to the side of the unit.

Scope of delivery The units are available in two sizes:

Size 2 TAS10A040 transformer module (4 kW)

Size 4 TAS10A160 transformer module (16 kW) with 5 connection conductor rails and 2 touchguards for the power terminals

55365AXXFigure 1: MOVITRANS® TAS10A nameplate (example)

• To perform compensation for a connected line conductor, compensation capacitorscan be installed, if required (→ Section "Installation of compensation capacitors inTAS10A").

• The compensation capacitors must be ordered separately from SEW-EURODRIVE(→ Section "Technical Data").

TI


3Unit design size 2 (TAS10A040)Installation

3.2 Unit design size 2 (TAS10A040)

53704AXXFigure 2: Unit design MOVITRANS® TAS10A040

[1] X2: Gyrator connection G1 / G2 (→ Primary voltage 400 VAC coming from TPS10A040 X2:G1/G2)[2] Terminal has no function[3] X3: Current feedback -I / +I (→ Coming from TPS10A040 X3:-I/+I)[4] X4: PE connection[5] LA (return conductor connection)[6] LI (supply conductor connection)

[1] [2] [3] [4]

[5] [6]

Make sure to read the section "Wiring diagrams for line conductor onTAS10A040" when connecting the line conductors (LA/LI).

9

10

3 nit design size 4 (TAS10A160)nstallation

3.3 Unit design size 4 (TAS10A160)

55533AXXFigure 3: Unit design MOVITRANS® TAS10A160

[1] Terminal has no function[2] X2: Gyrator connection G1 / G2 (→ Primary voltage 400 VAC coming from TPS10A160 X2:G1/G2)[3] X3: Current feedback -I / +I (→ Coming from TPS10A160 X3:-I/+I) [4] Terminal has no function[5] X4: PE connection[6] Terminal has no function[7] LA1 (connection of first return conductor)[8] LI1 (connection of first supply conductor) [9] Terminal has no function[10] LI2 (connection of second supply conductor)[11] LA2 (connection of second return conductor)[12] PE connection

[2] [3] [5][1] [4]

[7][6] [9][8] [10] [11] [12]

Make sure to read the section "Wiring diagrams for line conductor onTAS10A160" when connecting the line conductors (LA1/LI1,LA2/LI2).

UI


3Connection conductor rails size 4 (TAS10A160 and TPS10A160)Installation

3.4 Connection conductor rails size 4 (TAS10A160 and TPS10A160)

55304AXXFigure 4: Connection conductor rails for MOVITRANS® TPS10A160 and TAS10A160

[1] MOVITRANS® TPS10A160 stationary converter[2] Protective cover[3] Touch guard[4] Connection conductor rails[5] MOVITRANS® TAS10A160 transformer module[6] Connection conductor rails (detail view)

[1]

[2]

[3]

[4]

[3]

[2]

[5]

[6]

Make sure to read the notes in the sections "Assembly and installation notes" and"Wiring diagram, size 4 (TAS10A160)" when installing the standardized connec-tion conductor rails.

11

12

3 ssembly and installation notesnstallation

3.5 Assembly and installation notes

Tightening torques • Only use genuine connection elements.

Note the following tightening torques:

– Size 2 (TAS10A040)→Terminals X2, X3: 1.5 Nm (13.3 lb.in)– Size 2 (TAS10A040)→Terminals LA / LI: 8 Nm (70.80 lb.in)– Size 4 (TAS10A160)→ All connection terminals: 14 Nm (124 lb.in)– Sizes 2 and 4 → All retaining screws for installation of thecompensation

capacitors: 8 Nm (70.80 lb.in)

Mounting position • You must not install them horizontally, tilted or upside down!

Vertical installation • Install the units TPS10A and TAS10A vertically one above the other.

• Use twisted cables for connecting TAS10A040 to TPS10A040, as described inthe section "Wiring diagram, size 2".

Use standardized connection conductor rails for connecting TAS10A160 toTPS10A16, as described in the sections "Connection conductor rails" and "Wiringdiagram, size 4 (connection version A)."

• Note the distance between the units for installation according to the followingillustration:

Installation dimensions in mm:

It is essential to comply with the safety notes during installation!

53705AXX

TPS10A040 TAS10A040 TPS10A160 TAS10A160

A B C B D E F E

105 300+1 348+2 300+1 140 500+1 548+2 500+1

A D

B

C

B

E

F

E

TPS10A160TPS10A040

TAS10A040

TAS10A160

AI


3Assembly and installation notesInstallation

Horizontal installation

The preferred installation option is to mount the units vertically one above the other. Ifyou install the TPS10A and TAS10A units next to each other, note the following points:

• Leave at least 100 mm (4 in) clearance at the top and bottom for optimum heatdissipation. For project planning refer to the section "Technical Data." No clearanceis required at the sides; the units can be lined up in rows.

• Use twisted cables for connecting TAS10A040 to TPS10A040, as described inthe section "Wiring diagram, size 2".

• Use twisted cables and a choke for connecting TAS10A160 to TPS10A16, asdescribed in the section "Wiring diagram, size 4" (connection version B).

Line cross section • Line cross section between X2/X3 of the TAS10A and X2/X3 of the TPS10A:

– Size 2 (TAS10A040)→ 4 mm2

– Size 4 (TAS10A160)→ 16 mm2

Unit output • Connect approved line cables only. Line cables made from high-frequency litz wiremust be connected by qualified personnel.

Cable routing • Route power cables close together (cable ties, cable duct, etc.). Avoid closeproximity to sheet metal or other magnetic metals (heating through eddycurrents).

Possible installation options include

– Plastic duct or pipe on spacers– Spacing layer of aluminum sheet metal

• If the cables are routed through walls (control cabinet, etc.), you should try to havea common screw fitting for supply and return conductor. Install a duct boardmade of aluminum or plastic if this is not possible. Install the power and signal linesseparately.

Shielding and earthing

• Connect the shield by the shortest possible route and make sure it is earthed overa wide area at both ends. To avoid ground loops, you can ground one end of theshield via a suppression capacitor (220 nF / 50 V). If using double-shielded cables,earth the outer shield on the unit end and the inner shield on the other end.

• Ground the MOVITRANS® and all additional devices to meet the high-frequencyguidelines. To do so, provide a wide area metal-on-metal contact between the unithousing and ground (e.g. unpainted control cabinet mounting panel).

• Pipe-type cable lugs can only be connected to high-frequency litz wire by sol-dering with a powerful soldering iron (at least 200 W) or in a soldering bath.Pressing on is not permitted!

• For connection of line conductors see the notes in section "Wiring diagramsfor connecting line conductors to TAS10A040 or TAS10A160."

13

14

3 L compliant installationnstallation

3.6 UL compliant installation

Note the following points for UL compliant installation:

• Only use copper cables with the following temperature ranges as connectioncables:

– For MOVITRANS® TAS10A (size 2 and 4) temperature range 60/75 °C

• Permitted tightening torques for MOVITRANS® power terminals:

– Size 2 (TAS10A040)→Terminals X2, X3: 1.5 Nm (13.3 lb.in)– Size 2 (TAS10A040)→Terminals LA / LI: 8 Nm (70.80 lb.in)– Size 4 (TAS10A160)→All connection terminals: 14 Nm (124 lb.in)– Sizes 2 and 4 → All retaining screws for installation of the compensation

capacitors: 8 Nm (70.80 lb.in)

You will find additional information on this topic in the section "Installation of com-pensation capacitors."

UI


3Wiring diagram, size 2 (TAS10A040)Installation

3.7 Wiring diagram, size 2 (TAS10A040)

Transformer module size 2

Connect the TAS10A040 transformer module as follows:

Description of terminal functions

54901AXXFigure 5: Wiring diagram for MOVITRANS® TAS10A040 (delivery condition)

[1] Twisted cables[2] Short-circuit hoop (for startup of TAS10A040 without connected line conductors)

[1]

[2]

X2: X3:

X2: X3:

G1 G2 N.C. -I +I PE

G1 G2 N.C. -I +I PE

MOVITRANS® TAS10A

MOVITRANS® TPS10A

IG IL

4 5 6 9

LA LI

[1]

4 5 6 9

Terminal Function

X2: 4/5X3: 6/9

G1/G2–I/+I

Gyrator connection (→incoming from TPS10A X2:G1/G2)Current feedback (→ incoming from TPS10A X3:-I/+I)

LALI

Connection return conductorConnection supply conductor

15

16

3 iring diagram, size 4 (TAS10A160)nstallation

3.8 Wiring diagram, size 4 (TAS10A160)

Transformer module size 4

Connect the TAS10A160 transformer module as follows:

Versions The TAS10A160 transformer module can be connected to the TPS10A160 stationaryconverter using version A or B:

Version A With this version, use standardized connection conductor rails to connect theTAS10A160 transformer module to the TPS10A160 stationary converter. The rails areincluded in the delivery scope of the TAS10A160 transformer module.

55534AENFigure 6: Wiring diagram for MOVITRANS® TAS10A160 (delivery condition)

[1] Twisted cables[2] Short-circuit hoop (for startup of TAS10A160 without connected line conductors)[3] Connection conductor rails

A Version A (TAS10A160 connected to TPS10A160 using connection conductor rails)B Version B (TAS10A160 connected to TPS10A160 using twisted cables)

Horizontal installationVertical installation

[2] [2]

n=5BA

[1]

[3]

X2: X3:

G1 G2N.C. -I +I PE

MOVITRANS® TPS10A

4 5 6 9

X2: X3:

G1 G2 -I +I PE

MOVITRANS® TPS10A

4 5 6 9

X2: X3:

G1 G2N.C.

N.C.

N.C.

N.C.

N.C.

N.C.

N.C. N.C.N.C.

N.C.

N.C.-I +I PE

IG IG ILIL

4 5 6 9

LI1LA1 LA2 PELI2

X2: X3:

G1 G2 -I +I PE

MOVITRANS® TAS10AMOVITRANS

® TAS10A

4 5 6 9

LI1LA1 LA2 PELI2

HD...

WI


3Wiring diagram, size 4 (TAS10A160)Installation

The following figure shows the preferred installation (vertically on top of one another)and the connection of the units using conductor rails:

For more information on this topic, refer to the sections "Connection conductor rails","Assembly and installation notes" and "Technical data."

Version B With this version, you use twisted cables and connect the output choke HD003 at outputX2:G1/G2 to link the TAS10A160 transformer module to the TPS10A160 stationaryconverter.

Description of terminal functions

55306AXXFigure 7: Connection conductor rails for MOVITRANS® TPS10A160 and TAS10A160

[1] MOVITRANS® TPS10A160 stationary converter[2] Connection conductor rails[3] MOVITRANS® TAS10A160 transformer module[4] Connection conductor rails (detail view)

[1]

[2]

[3]

[4]

Output choke HD003

Part number 813 558 4

Inside diameter d 88 mm (4.46 in)

For line cross sections ≥ 16 mm2 (AWG 6)

Terminal Function

X2: 4/5X3: 6/9

G1/G2–I/+I

Gyrator connection (→incoming from TPS10A X2:G1/G2)Current feedback (→ incoming from TPS10A X3:-I/+I)

LA1LI1LA2LI2

Connection first return conductorConnection first supply conductorConnection second return conductorConnection second supply conductor

17

18

3 iring diagram for connecting a line conductor to TAS10A040nstallation

3.9 Wiring diagram for connecting a line conductor to TAS10A040

Components of the line conductor

The line conductor consists of a conductor loop that is made up of a supply conductorand a return conductor. The supply conductor is referred to as "LI" (line conductorinside); the return conductor is referred to as "LA" (line conductor outside). The returnconductor is connected in the unit to the protective conductor potential (PE).

Connecting a line conductor to TAS10A040

Remove the short-circuit hoop between LA and LI before connecting the line conductorto TAS10A040.

54904AXXFigure 8: Wiring diagram for MOVITRANS® TAS10A040 with a line conductor

[1] Line conductor[2] Connection of return conductor LA[3] Connection of supply conductor LI[4] Compensation capacitors[5] Gyrator

G1PE PEG2 -I +I

LA LI

C1

C3

C2

[2] [1] [3]

[4]

[5]

WI


3Wiring diagram for connecting a line conductor to TAS10A160Installation

3.10 Wiring diagram for connecting a line conductor to TAS10A160

Number of line conductors

You can connect one or two line conductors to the TAS10A160 transformermodule.

Connecting a line conductor to TAS10A160

When connecting a line conductor, make sure to connect it to LA1/LI1. Remove theshort-circuit hoop between LI1 and LI2 prior to installation.

54905AXXFigure 9: Wiring diagram for MOVITRANS® TAS10A160 with one line conductor

[1] Connection of line conductor to LA1/LI1[2] Short-circuit hoop LI2/LA2[3] Compensation capacitors[4] Gyrator

G1 PEG2 -I +I

LA1 LI1 LI2 LA2 PE

C2

C1 C3

C4

[2][1]

[3]

[4]

If you only connect one line conductor [1] to TAS10A160, you will have to reinstallthe short-circuit hoop [2] between LI2 and LA2!

19

20

3 iring diagram for connecting a line conductor to TAS10A160nstallation

Connecting two line conductors to TAS10A160

When connecting two line conductors, connect the first to LA1/LI1 and the secondto LA2/LI21. Remove the short-circuit hoop between LI1 and LI2 prior to installation.

54906AXXFigure 10: Wiring diagram for MOVITRANS® TAS10A16 with two line conductors

[1] Connection of first line conductor to LA1/LI1[2] Connection of second line conductor to LA2/LI2[3] Compensation capacitors[4] Gyrator

G1G1 PEG2 -I +I

LA1 LI1 LI2 LA2 PE

C1

C2

C3

C4

[2][1]

[3]

[4]

WI


3Installing compensation capacitors in TAS10AInstallation

3.11 Installing compensation capacitors in TAS10A

Before you start Observe the following notes before installing or removing compensationcapacitors:

Scope of delivery for compensation capacitors

The scope of delivery for compensation capacitors from SEW-EURODRIVE includesthe following components:

• Compensation capacitors (capacity 2 µF, 4 µF, 8 µF, 16 µF or 32 µF)

• Short setscrews

Compensation capacitors are available individually or as a complete package.

• Observe the safety instructions!

• Before removing the protective cover, disconnect the TPS10A and TAS10Aunits from the supply system. Dangerous voltages may still be present for up to10 minutes after mains disconnection.

• The fact that the operation LED V1 and other display elements are no longer illumi-nated on the TPS10A.. stationary converter does not indicate that the TPS10A..and TAS10A.. units have been disconnected from the power supply and do notcarry any voltage.

• Installation or removal of the compensation capacitors is only permitted withvertical installation of units (→ Section "Assembly and installation notes")!

• You can install the compensation capacitors in TAS10A040 and TAS10A160units (→ Section "Technical data for compensation capacitors").

• Use only the enclosed fastening material to install the compensationcapacitors (→ see following illustration)!

55265AXXFigure 11: Scope of delivery for compensation capacitors

[6] Short setscrew with hexagon socket SW4[7] Compensation capacitor (capacity 2 µF, 4 µF, 8 µF, 16 µF or 32 µF)

[6]

[7]

21

22

3 nstalling compensation capacitors in TAS10Anstallation

Removing the protective cover and housing cover from TAS10A040

Before you install the compensation capacitors, you must remove the protective coverand housing cover from the TAS10A040 transformer module:

Proceed as follows:

• Remove the upper and lower protective cover of the TAS10A040. You will first haveto loosen the two retaining screws [1].

• Remove the housing cover of the TAS10A040. To do so, loosen the two retainingscrews [2].

Installing the protective cover and housing cover on TAS10A040

Follow the instructions in reverse order to install the protective cover and the housingcover on the TAS10A040 transformer module:

• Attach the housing cover to TAS10A040. To do so, tighten the two retaining screws[2].

• Attach the upper and lower protective cover of the TAS10A040. To do so, tighten thetwo retaining screws [1].

53764AXXFigure 12: Removing the protective cover and housing cover from MOVITRANS® TAS10A040

[1] Retaining screws for upper / lower protective cover[2] Retaining screws for upper / lower housing cover

[2]

[1]

[2]

[1]

II



Delivery condition of the TAS10A040

Three conductor rails [3] are installed in the TAS10A040 transformer module ondelivery.

Installing compensation capacitors in TAS10A040

Proceed as follows to install the compensation capacitors:

• Always remove all three conductor rails completely.

• To do so, loosen the socket head screws [1] on the upper and lower conductor rails[3].

53773AXXFigure 13: MOVITRANS® TAS10A040 delivery condition

[1] Machine screw with SW5 hexagon socket[2] M8 combination nut with movable disc[3] Conductor rail[4] Short spacer bushing[5] Long setscrew with SW4 hexagon socket

[1]

[2]

[3]

[4]

[5]

[2]

[3]

[4]

[5]

[2]

[3]

[1]

23

24


Installation options in TAS10A040

The following options are available for installing the compensation capacitors in theTAS10A040 transformer module.

55261AXXFigure 14: Installation options for compensation capacitors in MOVITRANS® TAS10A040

[1] Machine screw with SW5 hexagon socket[2] M8 combination nut with movable disc[3] Conductor rail[4] Short spacer bushing[5] Long setscrew with SW4 hexagon socket[6] Short setscrew with hexagon socket SW4[7] Compensation capacitor (capacity 2 µF, 4 µF, 8 µF, 16 µF or 32 µF)

A Version A (one compensation capacitor)B Version B (two compensation capacitors)C Version C (three compensation capacitors)

[1]

[1]

[7]

[1]

[7]

[7]

[4]/[6]

[1]

[1][1]

[7]

[7]

[4]/[6]

[4]/[6]

[7]

[2]

[3]

[5]

[2]

[4]

[2]

[3]

[3]

[5]

[2]

[5]

[2]

[4]

[2]

A B C

[4]

Always assemble the respective installation version outside the TAS10A040 andreinstall it completely in the TAS10A040 afterwards.

II



TAS10A040 installation option with 3 compensation capacitors

A maximum of 3 compensation capacitors can be installed in the TAS10A040transformer module to perform compensation for a connected line conductor.

55263AXXFigure 15: MOVITRANS® TAS10A040 with 3 compensation capacitors

[1] Capacity C1[2] Capacity C2[3] Capacity C3[4] Machine screw with SW5 hexagon socket

[1]

[4]

[2]

[3]

25

26


Removing the protective cover and housing cover from TAS10A160

Before you can install the compensation capacitors, you must remove the protectivecover and housing cover from the TAS10A160 transformer module:

Proceed as follows:

• Remove the upper and lower protective cover of the TAS10A160. Start by looseningthe four retaining screws [1].

• Remove the housing cover of the TAS10A160. Start by loosening the four retainingscrews [2].

Installing the protective cover and housing cover on TAS10A160

Follow the instructions in reverse order to install the protective cover and the housingcover on the TAS10160 transformer module:

• Attach the housing cover to TAS10A160. To do so, tighten the four retaining screws[2].

• Attach the upper and lower protective cover of the TAS10A160. To do so, tighten thefour retaining screws [1].

53765AXXFigure 16: Removing the protective cover and housing cover from MOVITRANS® TAS10A160

[1] Retaining screws for upper / lower protective cover[2] Retaining screws for upper / lower housing cover

[2]

[1]

[1]

[1]

[1]

[2][2]

[2]

II



Delivery condition of the TAS10A160

Four conductor rails (two by two) [3] are installed in the TAS10A160 on delivery .

Installing compensation capacitors in TAS10A160

Proceed as follows to install the compensation capacitors:

• Always remove the two-by-two conductor rail combinations [3] completely.

• To do so, loosen the socket head screws [1] on the upper and lower conductor rails[3].

53776AXXFigure 17: MOVITRANS® TAS10A160 delivery condition

[1] Machine screw with SW5 hexagon socket[2] M8 combination nut with movable disc[3] Conductor rail[4] Short spacer bushing[5] Long setscrew with SW4 hexagon socket

[1]

[2]

[3]

[4]

[5]

[2]

[3]

[1]

27

28


Installation options in TAS10A160

The following options are available for installing the compensation capacitors in theTAS10A160 transformer module.

55266AXXFigure 18: Installation options for compensation capacitors in MOVITRANS® TAS10A160

[1] Machine screw with SW5 hexagon socket[2] M8 combination nut with movable disc[3] Conductor rail[4] Short spacer bushing[5] Long setscrew with SW4 hexagon socket[6] Short setscrew with hexagon socket SW4[7] Compensation capacitor (capacity 2 µF, 4 µF, 8 µF, 16 µF or 32 µF)

A Version A (single compensation capacitor)B Version B (two compensation capacitors)

[1]

[7]

[1]

[3]

[5]

[2]

[2]

[4]

[1]

[7]

[7]

[4]/[6]

[1]

A B

Note that only the installation option with one conductor rail pair is shown here. The dataapplies to the other pair as well.

Always assemble the respective combination outside the TAS10A160 andreinstall it completely in the TAS10A160 afterwards.

II



TAS10A160 installation option with 4 compensation capacitors

A maximum of 4 compensation capacitors can be installed in the TAS10A160transformer module to perform compensation for a connected line conductor.

55267AXXFigure 19: MOVITRANS® TAS10A160 with 4 compensation capacitors

[1] Capacity C1[2] Capacity C2[3] Capacity C3[4] Capacity C4[5] Machine screw with SW5 hexagon socket

[4]

[3][2]

[1]

[5]

29

30

4 lectronics serviceperation and Service

4 Operation and Service4.1 Electronics service

Send in for repair Contact the SEW-EURODRIVE Electronics Service in Bruchsal if a fault cannot berectified.

When contacting the electronics service, please always quote the digits of the servicecode (→ service label).

Service label The TAS10A transformer module is equipped with a service label that is attached nextto the nameplate. The type designation, service code and the component designation ofTAS10A are listed on the service label.

Provide the following information when sending the unit in for repair:

– Serial number (→ nameplate)– Unit designation– Service code (→ service label)– Brief description of the application– Connected load– Nature of the error– Accompanying circumstances– Your own presumption of what has happened– Any unusual events preceding the problem, etc.

53712AXXFigure 20: Service label

[1] Service label[2] Type designation[3] Service code[4] Component / part

TPS 1

1

-- -- --

TAS10A040-N06-4X1-1 2

34

EO


5General informationTechnical Data

5 Technical Data5.1 General information

The following table contains the technical data that applies to all MOVITRANS® TAS10Aunits regardless of size and power rating.

5.2 Unit data

MOVITRANS® TAS10A All sizes

Interference immunity Meets EN 61800-3

Interference emission with EMC-compli-ant installation

Class A limit according to EN 55011 and EN 55014, meets EN 61800-3

Ambient temperature ϑClimate class

0 °C... +40 °CEN 60721-3-3, class 3K3

Storage and shipping temperature ϑL –25 °C ... +75 °C (EN 60721-3-3, class 3K3)

Enclosure Size 2 (TAS10A040)Size 4 (TAS10A160)

IP10IP00, IP10 with installed touch guard

Pollution class 2 according to IEC 60664-1 (VDE 0110-1)

Operating mode DB (EN 60149-1-1 and 1-3)

Resistance to vibration Fulfills EN 50178

Relative humidity ≤ 95 %, no moisture condensation

TAS10A040- TAS10A160-

MOVITRANS® TAS10A N06-4X1-1 N08-4X1-1 N06-4X1-1 N08-4X1-1

Part number 13000241 13000349 13000268 13000365

Input

Rated input voltage VE_N 400 VAC

Input frequency fI 25 kHz

Rated input current IG_N 10 AAC 40 AAC

Load current IL 7.5 AAC 30 AAC

Output

Rated output power PN 4 kW 16 kW

Rated output current IA_N 60 AAC 85 AAC 60 AAC 85 AAC

Rated output voltage UA_N 83 VAC 59 VAC 333 VAC 235 VAC

Output frequency fA 25 kHz

Gyrator impedance XG 53.3 Ω 13.3 Ω

General

Power loss at PNPV 50 W 200 W

Cooling air consumption 20 m3/h (12 ft3/min) 40 m3/h (24 ft3/min)

Mass 8.8 kg (19.36 lb) 31.6 kg (69.52 lb)

Dimensions W × H × T 130 × 336 × 210 mm (5.12 × 13.19 × 8.27 in) 280 × 522 × 203 mm (11.02 × 20.55 × 7.99 in)


Pi

fkVA

Hz

n

31

32

5 ompensation capacitorsechnical Data

5.3 Compensation capacitors

Compensation capacitors for a line conductor current of 60 A or 85 A

Single compensation capacitors

Complete set of compensation capacitors

5.4 Dimensions

MOVITRANS® TAS10A040 – Size 2

The compensation capacitors can be installed in both TAS10A040 and TAS10A160units.

Compensation capacitors are available individually or as a complete set.

Capacity C [µF] Capacitative reactance XC [Ω] Type designation Part number

2 3.2 TCS10A-008-020-0 12 702 25 0

4 1.6 TCS10A-008-040-0 12 702 26 9

8 0.8 TCS10A-008-080-0 12 702 27 7

16 0.4 TCS10A-008-160-0 12 702 28 5

32 0.2 TCS10A-008-320-0 12 702 29 3

Capacity C [µF] Capacitative reactance XC [Ω] Type designation Part number

2, 4, 8, 16 and 32 3.2, 1.6, 0.8, 0.4 and 0.2 TCS10A-008-XXX-0 12 702 30 7

53706AXXFigure 21: Dimensions for MOVITRANS® size 2, dimensions in mm (in)

300 (

11.8

)

336 (

13.2

3)

315 (

12.4

0)

130 (5.12)

105 (4.13)

210 (8.27)

120 (4.72)

6.5 (0.26)

CT

Pi

fkVA

Hz

n


5DimensionsTechnical Data

MOVITRANS® TAS10A160 – Size 4

Connection conductor rail

53707AXXFigure 22: Dimensions for MOVITRANS® size 4, dimensions in mm (in)

522 (

20.5

5)

500 (

19.6

9)

140 (5.51)

280 (11.02)203 (7.99)

160 (6.30)7 (0.28)

54912AXXFigure 23: Dimensions for connection conductor rail, in mm

150

175

12 18 0+1

2x4

5°

3

20


Pi

fkVA

Hz

n

33

1

34 Operating Instructions – MOVITRANS® TAS10A Transformer Module

Index

1 Index

C

Compensation capacitors ...................................21

Installation in TAS10A040 ............................23

Installation in TAS10A160 ............................27

Installation options in TAS10A040 ................24

Installation options in TAS10A160 ................28

Installing the housing cover on TAS10A040 .22

Installing the housing cover on TAS10A160 .26

Installing the touch guard on TAS10A040 ....22

Installing the touch guard on TAS10A160 ....26

Notes ............................................................21

Removing the housing cover from TAS10A040 .....................................22

Removing the housing cover from TAS10A160 .....................................26

Removing the touch guard from TAS10A040 .....................................22

Removing the touch guard from TAS10A160 .....................................26

Scope of delivery ..........................................21

TAS10A040 delivery condition .....................23

TAS10A040 startup status ............................25

TAS10A160 delivery condition .....................27

TAS10A160 startup status ............................29

Connection

Size 4 versions (TAS10A160) ......................16

TAS10A040 line conductor ...........................18

TAS10A160 line conductor .................... 19, 20

Wiring diagram, size 2 (TAS10A040) ...........15

Wiring diagram, size 4 (TAS10A160) ...........16

Connection conductor rails .................................11

D

Delivery condition

TAS10A040 ..................................................23

TAS10A160 ..................................................27

Designated use .....................................................4

Dimensions

Size 2 (TAS10A040) .....................................32

Size 4 (TAS10A160) .....................................33

E

Electronics service ..............................................30

F

Function description

Terminals TAS10A040 ................................. 15

Terminals TAS10A160 ................................. 17

I

Installation

Notes ........................................................... 12

UL compliant ................................................ 14

L

Line conductor

Components ................................................ 18

Number ........................................................ 19

N

Nameplate ............................................................ 8

O

Operational environment ...................................... 5

S

Safety notes ......................................................... 4

Installation and startup ................................... 6

Operation and service .................................... 6

Scope of delivery .................................................. 8

Service ............................................................... 30

Repair .......................................................... 30

Service label ................................................ 30

Startup status

TAS10A040 ................................................. 25

TAS10A160 ................................................. 29

T

Technical Data ................................................... 31

Technical data

Compensation capacitors ............................ 32

Dimensions .................................................. 32

General information ..................................... 31

Unit data ...................................................... 31

U

UL compliant installation .................................... 14

Unit design

Size 2 (TAS10A040) ...................................... 9

Size 4 (TAS10A160) .................................... 10

Unit designation ................................................... 7

W

Warning notes ...................................................... 4

Waste disposal ..................................................... 5

Address List

Address ListGermany

HeadquartersProductionSales

Bruchsal SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 BruchsalP.O. BoxPostfach 3023 · D-76642 Bruchsal

Tel. +49 7251 75-0Fax +49 7251 75-1970http://[email protected]

Service Competence Center

Central Gear units / Motors

SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 1 D-76676 Graben-Neudorf

Tel. +49 7251 75-1710Fax +49 7251 [email protected]

Central Electronics

SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 Bruchsal


North SEW-EURODRIVE GmbH & Co KGAlte Ricklinger Straße 40-42 D-30823 Garbsen (near Hannover)


East SEW-EURODRIVE GmbH & Co KGDänkritzer Weg 1D-08393 Meerane (near Zwickau)


South SEW-EURODRIVE GmbH & Co KGDomagkstraße 5D-85551 Kirchheim (near München)


West SEW-EURODRIVE GmbH & Co KGSiemensstraße 1D-40764 Langenfeld (near Düsseldorf)


Drive Service Hotline / 24 Hour Service +49 180 5 SEWHELP+49 180 5 7394357

Additional addresses for service in Germany provided on request!

France

ProductionSalesService

Haguenau SEW-USOCOME 48-54, route de Soufflenheim B. P. 20185F-67506 Haguenau Cedex

Tel. +33 3 88 73 67 00 Fax +33 3 88 73 66 00http://[email protected]

AssemblySalesService

Bordeaux SEW-USOCOME Parc d’activités de Magellan62, avenue de Magellan - B. P. 182F-33607 Pessac Cedex

Tel. +33 5 57 26 39 00Fax +33 5 57 26 39 09

Lyon SEW-USOCOME Parc d’Affaires RooseveltRue Jacques TatiF-69120 Vaulx en Velin

Tel. +33 4 72 15 37 00Fax +33 4 72 15 37 15

Paris SEW-USOCOME Zone industrielle 2, rue Denis Papin F-77390 Verneuil I’Etang

Tel. +33 1 64 42 40 80Fax +33 1 64 42 40 88

Additional addresses for service in France provided on request!

Algeria

Sales Alger Réducom 16, rue des Frères ZaghnounBellevue El-Harrach16200 Alger

Tel. +213 21 8222-84Fax +213 21 8222-84

Argentina


Buenos Aires SEW EURODRIVE ARGENTINA S.A.Centro Industrial Garin, Lote 35Ruta Panamericana Km 37,51619 Garin


03/2005 35

Address List

36

Australia


Melbourne SEW-EURODRIVE PTY. LTD.27 Beverage DriveTullamarine, Victoria 3043


Sydney SEW-EURODRIVE PTY. LTD.9, Sleigh Place, Wetherill Park New South Wales, 2164


Austria


Wien SEW-EURODRIVE Ges.m.b.H. Richard-Strauss-Strasse 24A-1230 Wien

Tel. +43 1 617 55 00-0Fax +43 1 617 55 00-30http://[email protected]

Belgium


Brüssel SEW Caron-Vector S.A.Avenue Eiffel 5B-1300 Wavre


Brazil

ProductionSalesService

Sao Paulo SEW-EURODRIVE Brasil Ltda.Avenida Amâncio Gaiolli, 50Caixa Postal: 201-07111-970Guarulhos/SP - Cep.: 07251-250


Additional addresses for service in Brazil provided on request!

Bulgaria

Sales Sofia BEVER-DRIVE GmbHBogdanovetz Str.1BG-1606 Sofia

Tel. +359 2 9532565Fax +359 2 [email protected]

Cameroon

Sales Douala Electro-ServicesRue Drouot AkwaB.P. 2024Douala

Tel. +237 4322-99Fax +237 4277-03

Canada


Toronto SEW-EURODRIVE CO. OF CANADA LTD. 210 Walker Drive Bramalea, Ontario L6T3W1


Vancouver SEW-EURODRIVE CO. OF CANADA LTD.7188 Honeyman Street Delta. B.C. V4G 1 E2


Montreal SEW-EURODRIVE CO. OF CANADA LTD.2555 Rue Leger Street LaSalle, Quebec H8N 2V9


Additional addresses for service in Canada provided on request!

Chile


Santiago de Chile

SEW-EURODRIVE CHILE LTDA.Las Encinas 1295Parque Industrial Valle GrandeLAMPARCH-Santiago de ChileP.O. BoxCasilla 23 Correo Quilicura - Santiago - Chile


China

ProductionAssemblySalesService

Tianjin SEW-EURODRIVE (Tianjin) Co., Ltd.No. 46, 7th Avenue, TEDA Tianjin 300457

Tel. +86 22 25322612Fax +86 22 [email protected]://www.sew.com.cn

03/2005

Address List


Suzhou SEW-EURODRIVE (Suzhou) Co., Ltd.333, Suhong Middle RoadSuzhou Industrial ParkJiangsu Province, 215021P. R. China


Colombia


Bogotá SEW-EURODRIVE COLOMBIA LTDA. Calle 22 No. 132-60Bodega 6, Manzana BSantafé de Bogotá


Croatia

SalesService

Zagreb KOMPEKS d. o. o.PIT Erdödy 4 IIHR 10 000 Zagreb


Czech Republic

Sales Praha SEW-EURODRIVE CZ S.R.O.Business Centrum Praha Luná 591CZ-16000 Praha 6 - Vokovice

Tel. +420 a220121236Fax +420 220121237http://[email protected]

Denmark


Kopenhagen SEW-EURODRIVEA/SGeminivej 28-30, P.O. Box 100DK-2670 Greve


Estonia

Sales Tallin ALAS-KUUL ASPaldiski mnt.125EE 0006 Tallin

Tel. +372 6593230Fax +372 [email protected]

Finland


Lahti SEW-EURODRIVE OYVesimäentie 4FIN-15860 Hollola 2


Gabon

Sales Libreville Electro-ServicesB.P. 1889Libreville

Tel. +241 7340-11Fax +241 7340-12

Great Britain


Normanton SEW-EURODRIVE Ltd.Beckbridge Industrial Estate P.O. Box No.1GB-Normanton, West- Yorkshire WF6 1QR


Greece

SalesService

Athen Christ. Boznos & Son S.A.12, Mavromichali StreetP.O. Box 80136, GR-18545 Piraeus

Tel. +30 2 1042 251-34 Fax +30 2 1042 251-59http://[email protected]

Hong Kong


Hong Kong SEW-EURODRIVE LTD.Unit No. 801-806, 8th FloorHong Leong Industrial ComplexNo. 4, Wang Kwong Road Kowloon, Hong Kong

Tel. +852 2 7960477 + 79604654Fax +852 2 [email protected]

China

03/2005 37

Address List

38

Hungary

SalesService

Budapest SEW-EURODRIVE Kft.H-1037 BudapestKunigunda u. 18

Tel. +36 1 437 06-58Fax +36 1 437 [email protected]

India


Baroda SEW-EURODRIVE India Pvt. Ltd.Plot No. 4, GidcPor Ramangamdi · Baroda - 391 243Gujarat


Technical Offices Bangalore SEW-EURODRIVE India Private Limited308, Prestige Centre Point7, Edward RoadBangalore


Mumbai SEW-EURODRIVE India Private Limited312 A, 3rd Floor, Acme PlazaAndheri Kurla Road, Andheri (E)Mumbai


Ireland

SalesService

Dublin Alperton Engineering Ltd. 48 Moyle RoadDublin Industrial EstateGlasnevin, Dublin 11

Tel. +353 1 830-6277Fax +353 1 830-6458

Israel

Sales Tel-Aviv Liraz Handasa Ltd. Ahofer Str 34B / 22858858 Holon


Italy


Milano SEW-EURODRIVE di R. Blickle & Co.s.a.s.Via Bernini,14 I-20020 Solaro (Milano)

Tel. +39 2 96 9801Fax +39 2 96 [email protected]

Ivory Coast

Sales Abidjan SICASte industrielle et commerciale pour l’Afrique165, Bld de MarseilleB.P. 2323, Abidjan 08

Tel. +225 2579-44Fax +225 2584-36

Japan


Toyoda-cho SEW-EURODRIVE JAPAN CO., LTD 250-1, Shimoman-no,Toyoda-cho, Iwata gunShizuoka prefecture, 438-0818


Korea


Ansan-City SEW-EURODRIVE KOREA CO., LTD. B 601-4, Banweol Industrial Estate Unit 1048-4, Shingil-DongAnsan 425-120


Latvia

Sales Riga SIA Alas-KuulKatlakalna 11CLV-1073 Riga


Lebanon

Sales Beirut Gabriel Acar & Fils sarlB. P. 80484Bourj Hammoud, Beirut

Tel. +961 1 4947-86 +961 1 4982-72+961 3 2745-39Fax +961 1 4949-71 [email protected]

03/2005

Address List

Lithuania

Sales Alytus UAB IrsevaMerkines g. 2ALT-62252 Alytus


Luxembourg


Brüssel CARON-VECTOR S.A.Avenue Eiffel 5B-1300 Wavre


Malaysia


Johore SEW-EURODRIVE SDN BHD No. 95, Jalan Seroja 39, Taman Johor Jaya81000 Johor Bahru, JohorWest Malaysia


Mexico


Queretaro SEW-EURODRIVE, Sales and Distribution, S. A. de C. V.Privada Tequisquiapan No. 102Parque Ind. Queretaro C. P. 76220Queretaro, Mexico


Morocco

Sales Casablanca S. R. M.Société de Réalisations Mécaniques 5, rue Emir Abdelkader05 Casablanca

Tel. +212 2 6186-69 + 6186-70 + 6186-71Fax +212 2 [email protected]

Netherlands


Rotterdam VECTOR Aandrijftechniek B.V. Industrieweg 175 NL-3044 AS RotterdamPostbus 10085NL-3004 AB Rotterdam


New Zealand


Auckland SEW-EURODRIVE NEW ZEALAND LTD. P.O. Box 58-428 82 Greenmount driveEast Tamaki Auckland


Christchurch SEW-EURODRIVE NEW ZEALAND LTD. 10 Settlers Crescent, FerrymeadChristchurch


Norway


Moss SEW-EURODRIVE A/SSolgaard skog 71N-1599 Moss


Peru


Lima SEW DEL PERU MOTORES REDUCTORES S.A.C.Los Calderos, 120-124Urbanizacion Industrial Vulcano, ATE, Lima


Poland


Lodz SEW-EURODRIVE Polska Sp.z.o.o.ul. Techniczna 5 PL-92-518 Lodz


03/2005
39

ddress List

40

Portugal


Coimbra SEW-EURODRIVE, LDA. Apartado 15 P-3050-901 Mealhada

Tel. +351 231 20 9670Fax +351 231 20 3685http://[email protected]

Romania

SalesService

Bucuresti Sialco Trading SRL str. Madrid nr.4 011785 Bucuresti

Tel. +40 21 230-1328Fax +40 21 230-7170 [email protected]

Russia

Sales St. Petersburg ZAO SEW-EURODRIVE P.O. Box 263 RUS-195220 St. Petersburg

Tel. +7 812 5357142 +812 5350430Fax +7 812 5352287http://[email protected]

Senegal

Sales Dakar SENEMECA Mécanique GénéraleKm 8, Route de Rufisque B.P. 3251, Dakar


Serbia and Montenegro

Sales Beograd DIPAR d.o.o.Kajmakcalanska 54SCG-11000 Beograd

Tel. +381 11 3088677 / +381 11 3088678Fax +381 11 [email protected]

Singapore


Singapore SEW-EURODRIVE PTE. LTD. No 9, Tuas Drive 2 Jurong Industrial Estate Singapore 638644


Slovakia

Sales Sered SEW-Eurodrive SK s.r.o.Trnavska 920SK-926 01 Sered


Slovenia

SalesService

Celje Pakman - Pogonska Tehnika d.o.o.UI. XIV. divizije 14SLO – 3000 Celje


South Africa


Johannesburg SEW-EURODRIVE (PROPRIETARY) LIMITEDEurodrive House Cnr. Adcock Ingram and Aerodrome RoadsAeroton Ext. 2Johannesburg 2013P.O.Box 90004Bertsham 2013


Capetown SEW-EURODRIVE (PROPRIETARY) LIMITED Rainbow ParkCnr. Racecourse & Omuramba RoadMontague GardensCape TownP.O.Box 36556Chempet 7442 Cape Town

Tel. +27 21 552-9820Fax +27 21 552-9830Telex 576 [email protected]

Durban SEW-EURODRIVE (PROPRIETARY) LIMITED2 Monaceo PlacePinetownDurbanP.O. Box 10433, Ashwood 3605


A

03/2005

Address List

Spain


Bilbao SEW-EURODRIVE ESPAÑA, S.L. Parque Tecnológico, Edificio, 302E-48170 Zamudio (Vizcaya)


Sweden


Jönköping SEW-EURODRIVE ABGnejsvägen 6-8S-55303 JönköpingBox 3100 S-55003 Jönköping


Switzerland


Basel Alfred lmhof A.G.Jurastrasse 10 CH-4142 Münchenstein bei Basel


Thailand


Chon Buri SEW-EURODRIVE (Thailand) Ltd.Bangpakong Industrial Park 2700/456, Moo.7, Tambol DonhuarohMuang DistrictChon Buri 20000


Tunisia

Sales Tunis T. M.S. Technic Marketing Service7, rue Ibn EI Heithem Z.I. SMMT2014 Mégrine Erriadh

Tel. +216 1 4340-64 + 1 4320-29Fax +216 1 4329-76

Turkey


Istanbul SEW-EURODRIVE Hareket Sistemleri Sirketi Bagdat Cad. Koruma Cikmazi No. 3 TR-34846 Maltepe ISTANBUL

Tel. +90 216 4419163 + 216 4419164 + 216 3838014Fax +90 216 [email protected]

USA

ProductionAssemblySalesService

Greenville SEW-EURODRIVE INC. 1295 Old Spartanburg Highway P.O. Box 518Lyman, S.C. 29365

Tel. +1 864 439-7537Fax Sales +1 864 439-7830Fax Manuf. +1 864 439-9948Fax Ass. +1 864 439-0566Telex 805 550 http://[email protected]


San Francisco SEW-EURODRIVE INC. 30599 San Antonio St.Hayward, California 94544-7101


Philadelphia/PA SEW-EURODRIVE INC. Pureland Ind. Complex 2107 High Hill Road, P.O. Box 481Bridgeport, New Jersey 08014


Dayton SEW-EURODRIVE INC.2001 West Main Street Troy, Ohio 45373


Dallas SEW-EURODRIVE INC.3950 Platinum Way Dallas, Texas 75237


Additional addresses for service in the USA provided on request!

Venezuela


Valencia SEW-EURODRIVE Venezuela S.A.Av. Norte Sur No. 3, Galpon 84-319Zona Industrial Municipal NorteValencia, Estado Carabobo

Tel. +58 241 832-9804Fax +58 241 [email protected]@cantv.net

03/2005
41


SEW-EURODRIVE – Driving the world

How we’re driving the world

With people who

think fast and

develop the

future with you.

With a worldwide

service network that is

always close at hand.

With drives and controls

that automatically

improve your productivity.

With comprehensive

knowledge in virtually

every branch of

industry today.

With uncompromising

quality that reduces the

cost and complexity of

daily operations.

With a global presence

that offers responsive

and reliable solutions.

Anywhere.

With innovative

technology that solves

tomorrow’s problems

today.

With online information

and software updates,

via the Internet, available

around the clock.

Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services

SEW-EURODRIVEDriving the world

SEW-EURODRIVE GmbH & Co KG

P.O. Box 3023 · D-76642 Bruchsal / Germany

Phone +49 7251 75-0 · Fax +49 7251 75-1970

[email protected]

→ www.sew-eurodrive.com

Documents

ëJ^ ûË÷Ë=ú59¯O7éd O cø·a${>`£ôT(]Êa°NàQñ ¼VDÿéwö ð/%£ñÚâ ... · 4 Operating Instructions – MOVITRANS® TAS10A Transformer Module 1 Important Notes 1 Important