READING TIPwhen browsing through this catalogue it is easier

using two-up view(viewing the left & right side next to each other)!

FOR BEST RESULTS DO NOT

PRINT THIS PAGE!This page will interfere with the

correct page order when printing recto-verso.

Q u a l i t y P a r t s & S e r v i c e

The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means.

You are permitted to print the pages for personal use only.

S i x t h E d i t i o n • 19 0 . 0 5 8 Q u a l i t y P a r t s & S e r v i c eS e c o n d E d i t i o n • 19 0 . 7 2 1 Q u a l i t y P a r t s & S e r v i c e

JAGUAR MKII - DAIMLER240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69PARTS & ACCESSORIES CATALOGUE

fill your customer number in for easy ordering

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

All Rights reserved. No part of this publication may be reproduced or absorbed in any catalogue or information system by any means, Mechanical, photographic, electronic or otherwise, without prior express written consent of Anglo-Parts n.v.

Se cond Ed i t i on • 190 .721 • Upda ted December 2007 • © Ang lo Par t s nv 2007

JAGUAR MKII - DAIMLER240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69PARTS & ACCESSORIES CATALOGUE

1© V a n G e s t e l B & C 2 0 0 5

IMPORTANT POINTS The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed all previous. Please read below, the most important points.

OUR SALESMEN We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you use the books listed in this catalogue.

OUR CATALOGUES/WEBSITE We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied may vary from illustrations and photo’s, but will function the same way with similar quality.

OUR PART NUMBERS & PRICES All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required can vary from application to application. USE - the part number has been replaced by an other part number indicated.

ORDERS Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch. For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM. - Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscale (for Italian customers only) or VAT number for European companies. - Specify if shipping address is different. - CAR TYPE INFORMATION, make, model, year build etc. - Provide Anglo Parts PART NUMBERS only. - Indicate the quantity desired and parts description. - Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank. - Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you for your understanding.

PAYMENTS CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number ( mostly 16 figures ), expiring date and name as appears on the card. BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice (Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.

SHIPMENT NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used. INTERNATIONAL: We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted. Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.

RECEIVING YOUR GOODS For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you actually need them and report problems within three days of receiving the goods.

WARRANTY Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.

RETURNS If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do not refund the value of credit notes.

SURCHARGE - CORE DEPOSITS A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system. In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.

BACK ORDERS Goods which are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take this part in used condition, please ask us and we will do our best to obtain it, if possible.

Important information

© V a n G e s t e l B & C 2 0 0 52

BELANGRIJKE PUNTENDe verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.

ONZE VERKOPERSWe zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken uit de lijst in de katalogus aan.

ONZE KATALOGIGeen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.

ONZE ONDERDEELNUMMERS EN PRIJZENAlle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagtkan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W. vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162 voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant. A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.

BESTELLINGENU kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt: - uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven; - specifieer als het leveringsadres verschilt; - informatie over de auto, merk, model, bouwjaar, enz.; - gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken; - geef het aantal stukken aan en beschrijf de onderdelen; - duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD. - Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.

BETALINGENKredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD. Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)

VERZENDINGNationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper.

ONTVANGST VAN DE GOEDERENGelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.

DE WAARBORGBijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing. De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald, zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.

TERUGZENDENWanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers, zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.

SUPPLEMENTEen supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen. Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen. Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van de krukas terugbetalen.

BACK ORDERSDe goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.

Belangrijke informatie

3© V a n G e s t e l B & C 2 0 0 5

Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.

LES POINTS IMPORTANTS Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous, vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes. Vieillez lire les points les plus importants, mentionnés ci-dessous.

NOS VENDEURS Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider. Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.

NOS CATALOGUES Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.

NOS NUMEROS DE PIECE ET LES PRIX Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix. Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates. L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le numéro de pièce a été remplacé par le numéro indiqué.

LES COMMANDES Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande: - votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises; - spécifiez si l’adress de livraison est différente; - informations sur la voiture: la marque, le modèle, l’année de construction, etc.; - utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement; - donnez le nombre des pièces et décrivez les; - indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur. Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.

LES PAIEMENTS La carte de crédit: Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte. La Banque: Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)

L’EXPEDITION National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit. International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.

LA RECEPTION DES PRODUITS Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur. Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.

LA GARANTIE Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris en considération de vérification.

LA REEXPEDITION Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.

LE SUPPLEMENT Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité, est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).

LES “BACK ORDERS” Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.

Informations importantes

© V a n G e s t e l B & C 2 0 0 54

Wichtige Auskünfte1. EINFÜHRUNG

Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster Stelle stehen sollten.

2. ALLGEMEINE GESCHÄFTSBEDINGUNGENWir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind. Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese. Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf die Verträge.

3. TECHNIKFür technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen, diese dienen lediglich der Darstellung unserer Waren.

4. KATALOGWir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen als solche bezeichnet werden.

5. ERSATZTEILNUMMERN UND PREISEAlle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert, und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.

6. AUFTRAGSERTEILUNGSie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre Kunden-Nummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich). - Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht. - Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw. - Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden. - Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an. - Geben Sie die Art der Zahlungsweise an. - Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.

7. ZAHLUNGSWEISESobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.

8. VERSENDUNGDa der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware, die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden. Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.

9. RÜCKSENDUNGENWenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe, Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.

10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASISFür Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten. Insoweit führen wir eine Schätzung durch.

11. NACHLIEFERUNGENWaren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.

5© V a n G e s t e l B & C 2 0 0 5

Allgemeine Verkaufs- und LieferbedingungenAllgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar

1. Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich

zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im

Einzelfall nicht ausdrücklich widersprochen wurde.

2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern

noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines

Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts

zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).

Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet

werden, nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)

3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat

der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren

Verzugsschadens bleibt vorbehalten.

4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich,

spätestens innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben

bei uns geltend zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir

lediglich zur Nachbesserung bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir

behalten uns die Überprüfung etwa gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor

dessen Prüfungsergebnis vorliegt. Nach endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt.

Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder

unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den

Liefergegenstand sowie Schäden aus sportlichen Einsätzen.

5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind

ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.

6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit

dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen

Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)

unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.

7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung

einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen

ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile

abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.

8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser

Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das

entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine

Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils

wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.

9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei

Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung

für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.

10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich

das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine

Anwendung.

11 Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch

die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der

wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen

Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.

12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich

für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.

© V a n G e s t e l B & C 2 0 0 56

INFORMAZIONI IMPORTANTILe condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.

I NOSTRI VENDITORINon sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.

I CATALOGHICi impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa. Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come: SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile. LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione). USE: il numero di articolo è stato sostituito dal numero indicato.

ORDINIAccettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue: - indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte; - specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione; - completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc. - usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine. - indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi. - indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.

PAGAMENTICarta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre, la scadenza, il badge code ed il nome del “titolare” della carta.Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso, sarà nostra premura spedire il materiale non appena arrivato il pagamento.Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.

SPEDIZIONEEffettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura, essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.

RICEVIMENTO DELLA MERCESiete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale: firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto. Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.

GARANZIAAnglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di 7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.

RISPEDIZIONEAccettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.

SUPPLEMENTOAlcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio. Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico vostro.

BACKORDERS / ORDINI ARRETRATII prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede, provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.

Informazioni importante

7© V a n G e s t e l B & C 2 0 0 5

How to read and use the part number lists

ILL N°. Part n°. QTY DESCRIPTIONillustration number Part number Quantity required Part description

Illustration numberExceptions: If a part has no illustration number it is because there are several kinds of the part in question.e.g. Left and right hand door panel.

Part numberExceptions: A part number may be missing if the part is no longer obtainable or in production.

Necessary quantity:ATTENTION: indicated here is the quantity of units necessary and not the quantity of units which are supplied per order/delivery. Our parts are sold per unit.

Part descriptionWith dimensions of screws, bolts, cables, etc. Information about carburetters, electricity etc., details about books giving more information about the part itself: original, reproduction, reconditioned, etc.

Illustratie nummerUitzonderingen: Een onderdeel heeft geen Illustratie nr. omdat er meerdere soorten van het bestaande stuk zijn. vb. Links en rechts deurpaneel

OnderdeelnummerUitzonderingen: Een onderdeel-n u m m e r k a n o n b r e k e n waarneer dit stuk niet meer te verkrijgen of in produktie is.

Nodige HoeveelheidLET OP: Hier wordt de hoeveelheid stuks die nodig zijn vermeld en niet de hoeveelheid stuks die worden geleverd bij bestellingen. Onze onderdelen worden verkocht per stuk.

Onderdeel beschrijvingMet maten van schroeven, bouten, kabels enz. Informatie over carburateurs, elektriciteit enz. Details over boeken die meer informatie geven. Informatie over het onderdeel zelf: origineel, reproduktie, gerestaureerd enz.

Numéro illustrationExceptions: Si une pièce détachée ne comporte pas de numéro d’illustration, c’est que la pièce existe en plusieurs versions.Exemple: Panneau de porte gauche - droite.

Numéro de la pièceExceptions: Si ce numéro n’est pas indiqué, c’est parce que cette pièce n’estplus disponible ou qu’e l le n’est p lus en production.

Quantité nécessaire:ATTENTION: Sous cette rubrique, on mentionne la quantité de pièces qu’il faut et non la quantité de pièces livrées lors de la commande. Nos pièces détachées se vendent à l’unité.

Description de la pièce:Comporte les dimensions des vis, écrous, câbles etc. Des reseignements au sujet de carburateurs, électricité etc., des détails concernant des livres informatifs. Des renseignements au sujet de la pièce même: pièce d’origine, reproduction, pièce révisée etc.

Abbildungsnummer:Ausnahmefall: Wenn ein Einzelteil keine Abbildungs-nummer hat, ist das, weil der Einzelteil in mehreren Fassungen besteht.Beispiel: Linke - rechte Türfläche.

Nummer des Ersatzteils:Ausnahmefall: Mangelt diese Nummer, dann ist dieser Einzelteil nicht mehr verfügbar oder wird er nicht mehr hergestellt.

Benötigte Menge:Achtung! Unter diesem Titel wird die Menge der benötigten Einzelteile angegeben, sondern nicht die Menge der bei Bestellungen gelieferten Einzelteile. Unsere Einzelteile werden stückweise verkauft.

Beschreibung des ErsatzteilsBetrifft die Abmessungen der Schrauben, Mutter, Kabel, usw.; Auskünfte über Vergaser, Elektrizität, usw. Einzelheiten über Info-Bücher, Auskünfte über den Einzelteil selbst: Originaleinzelteil, Reproduction, überholter Einzelteil usw.

Numero illustrazioneEccezioni: Un componente non ha un numero il lustrazione perchè ci sono vari tipi del pezzo esistente.P. es. Pannello porta destro e sinistro.

Numero componenteEccezioni: Può succedere che non c’è un numero componente quando il pezzo non è più disponibile o quando non è più

in produzione.Quantità necessariaAVVERTENZA: La quantità di pezzi necessari è data, e non la quantità di pezzi consegnati dopo ordinazioni. I nostri componenti vengono venduti

al pezzo.Descrizioni componentiCon misure di vite, bulloni, cavi ecc. Informazione su carburatori, elettricità ecc. dettagli su libri che danno ulteriore informazione. Informazione sul componente stesso: originale, riproduzione, revisionato ecc.

GB

D

F

NL

I

© V a n G e s t e l B & C 2 0 0 58

unit serial numbers, production dates & car numbers

DAIMLER 250 V8 RHD LHD

START

JUL 1967 1K1001 1K30001

END

AUG 1969 1K5780 1K30105

DAIMLER V8 RHD LHD

START

OKT 1962 1A1001 1A20001

END

JUN 1967 ? 1A20622

240/340 240 RHD 240 LHD 340 RHD 340 LHDSTART

SEP 1967 1J1001 1J30001 1J50001 1J80001

JAN 1968 1J1429 1J30013 1J50480 1J80071

END 340

SEP 1968 1J52265 1J80535

DEC 1968 1J3432 1J30571

END 240

APR 1969 1J4716 1J30730

MK2 2.4 RHD 2.4 LHD 3.4 RHD 3.4 LHD 3.8 RHD 3.8 LHDSTART

OKT 1959 100001 125001 150001 175001 200001 210001

SEP 1960 103669 125711 152282 176024 201798 213964

OKT 1963 116114 127312 164002 179499 231586 223182

MAY 1964 117502 127509 166390 179795 232536 223530

APR 1965 118867 127760 168957 180137 233919 224086

SEP 1965 119200 127822 169341 180188 234125 224150

DEC 1966 120291 128054 170881 180479 235152 224156

END

SEP 1967 121769 128405 172095 181571 235383 224758

Unit serial numbers MK2, 240, 340, some 340 with 3.8 engineENGINE NUMBER GEARBOX NUMBER REAR AXLE NUMBER

Stamped on the right-hand side of the cylinder block above oil filter

Stamped on the LH rear top of the main casing and the top cover

Stamped on the top side of the nose piece

Prefix Prefix PrefixMK2 (2.4) BG, BJ MK2 (3.4) KG, KJMK2 (3.8) LA, LE

240/340 7J

GB/JS, GB/JC, GBN/JS, JCN, DG250(autom.)GB/JS, GB/JC, GBN/JS,JCN, DG250(autom.)GB/JS, GB/JC, GBN/JS, JCN, DG250(autom.)

GBN/JS, JCN, DG250(autom.)

4HA4HA4HA 4HA

Unit serial numbers Daimler V8, V8 250ENGINE NUMBER GEARBOX NUMBER REAR AXLE NUMBER

Stamped on the right-hand side of the cylinder block below the cylinder head, near by the waterpump

Stamped on the LH rear topof the main casing and the top cover

Stamped on the side of thenose piece

Prefix Prefix PrefixV8 97331, 741100

V8 250 7A, 7KGB/JS, GB/JC, GBN/JS, 35EG(autom.)

GBN/JS, JCN, AS1-35EG(autom.)4HA4HA

Jaguar production dates, car numbersMK2 2.4 RHD 100001 onMK2 2.4 LHD 125001 onMK2 3.4 RHD 150001 onMK2 3.4 LHD 175001 onMK2 3.8 RHD 200001 onMK2 3.8 LHD 210001 onTotal production 83980

240 2.4 RHD 1J1001240 2.4 LHD 1J30001340 3.4 RHD 1J50001 340 3.4 RHD 1J80001

Total production 7246

Daimler production dates, car numbersDaimler V8 RHD 1A1001Daimler V8 LHD 1A20001

Total production 12997

V8 250 RHD 1K1001V8 250 LHD 1K30001Total production 4883

9© V a n G e s t e l B & C 2 0 0 5

IndexAAccelerator linkage 28-29Air filter 28-29Alternator conversion 69Aluminium radiator 63Antifreeze 17, 63Anti-roll bar kit 67Ash tray 58Autoglym products 75Automatic gearbox 39

BBadge bar 56, 59Badge, grill 57Badges 56, 59Battery conditioner 73Battery switch 47, 73Battery 47Beading set 57Body parts 53, 54Bonnet 56Books 78-86Boot lid 56Brake cylinder 45Brake disc 46Brake fluid 45 ,68Brake hose 45Brake improvements 68Brake light switch 48Brake pads Greenstuff 68Brake parts front/rear 46Brake pipes 45Bucket seats 77Bulb kit 50Bumpers 56Bypass thermostat 63

CCable indicators 32Cam alignment tool 10, 44, 61Cam cover 10Camshaft 10, 61Cap 72Car covers 72Carburettor oil 24, 64Carburettor pars 24Castrol oil 74CD rom 78Central door locking kit 69Chain adjusting tool 14Chain, timing 14Chamois 75Choke thermostat 18Choke warning switch 48, 52Chrono instruments 77Clutch 34Coil 32, 65Condensor 32Conolly hide care 75

C continuedContact set 32Control box 48Cooling improvements 63Cooling, Daimler 21Copper grease 41, 70Core plug set 15Core plug strap kit 61Crankshaft 12Crown wheel and pinion 40Cylinder head 10

DDaimler mascot 56Dash nut spanner 52Derrington steering wheel 70Dipstick 15Direction indicator switch 52Door seal 55Door switch 52Doors 55Drip pan 73Dynamo 48

EElectric window kit 69Engine mountings 15, 61Engine paint 11Engine parts, Daimler 19, 20Engine tuning parts 61Exhaust manifold 18Exhaust system 30-31Exhaust valve 10

FFacet fuel pump 64Fan belt 17, 48Fan belt, Daimler 21Fan 17Federal spinners 70Fertan 54Filler cap, fuel 23Fire extinguisher 73Flasher box 48Flexi fan 63Flywheel 12Fog lamp, front 50Fog lamp, rear 51, 73Formula power lead set 65Front suspension 42Fuel filter 23, 64Fuel pipes 23Fuel pump 23Fuel tank 23Fuse box 48

GGaiter, gear lever 58Gasket set, cylinder head 10

G continuedGasket set, engine 12Gear lever knob 35Gearbox oil 34Gearbox parts 35, 37Getrag gearbox 65Glove box lock 58Glue 58Grease pump 42Grease 42Grill 57Grommet kit 47, 52Grose jet 24

HHammer, copper 44Handbrake switch 46, 48, 52Handbrake 46Headlamps 50Headlining 58Heat reduction products 66Heater system 22Heater valve 22Horn 48Hydra blade 75

II.D. plates 59Ignition coil 65Ignition switch 52Ignition system 32Inlet manifold 18Inlet valve 10Interior light 51

JJack 44Jaguar mascot 56

KK&N airfilter 64Kenlowe kit 17, 63Key-fob 59, 76King filter 64Koni shock absorber 67

LLead replacement products 74Leaping cat 56Lighting switch 52Lock set 55Lumenition ignition 32, 65Luster lace 70

MMagnetronic ignition 65Mirror, exterior 57, 60Mirror, interior 57Moto-Lita steering wheels 70

OOil 16, 74Oil cooler 62Oil drip pan 73Oil filler cap Aston/Monza 61Oil filter 16, 19Oil improvements 62Oil pressure switch 48, 52Oil pump 16Oil seal conversion kit 12, 62Overdrive 36, 38Overrider 56Owners handbook 81

PPanhard rod 41Parts catalogues 80Patch, Jaguar 76Pedal rubber 28, 34, 45Penrite oil 74Pewter models 72Piston set 12Power steering 67Propshaft 39

RRadiator 17, 21, 63Rally instruments 77Ram pipes 64Rear axle 40Rear lamps 51Rear spring 41Rear suspension 41Relais 48Release bearing 34Retro trip 77Reverse light switch 35, 48Reverse light 73Rocker covers 61Rotor 32Rubber grease 45

SSeat belt 58Seat foam 58Seat runner 58Sending unit, fuel 23Servo 45Shock absorber, front 42Shock absorber, rear 41Silicone brake fluid 68Sill 53Slave cylinder 34Solenoid, overdrive 38Solex carburetor parts 25Spark plug 32Spax shock absorber 67Speedo cable 52Spigot bush 12

S continuedSpinners 70Spin-on oil filter 62Spot lamp 50Starter motor 48Starter motor, modern type 62, 69Steering improvements 67Steering 43Stickers 59SU carburetor 26-27Sunvisor 58Suspension improvements 67Switches 52Synchronizer tool 24, 64

TTacho generator 52Tappet hold-down kit 61Thermostat 18Timing chain 14Tools 44Transmission oil 40Trim kit 58

UUmbrella 76Union jack accessories 76Universal joint 39

VVacuum pipe 32Voltage stabilizer 48, 52VSP lead substitute 74

WWasher system 49Water pump 17Water temperature switch 52Water wetter 63, 73Waxoyl 54Wheels 44Window regulator 55Windscreen front/rear 55Windscreen washer 49Wings 53Wiper blade 49Wiper motor 49Wiper system, improved 69Wire wheel, competition 70Wire wheels 44, 70Wiring loom 47Wood set 57Workshop manuals 79, 82

© V a n G e s t e l B & C 2 0 0 510

Jaguar: Cylinder head

11© V a n G e s t e l B & C 2 0 0 5

Jaguar: Cylinder head

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 018.076 1 Rebuild cylinder head with cam 2.4 shaft 018.077 1 Rebuild cylinder head with cam 3.4 shaft 018.078 1 Rebuild cylinder head with cam 3.8 2 018.061 1 RH cam cover, inlet 3 018.084 1 RH cam cover, black, inlet 240 & 340 4 018.062 1 LH cam cover, exhaust 5 018.085 1 LH cam cover, black, exhaust 240 & 340 6 016.582 1 RH cam cover gasket 7 016.581 1 LH cam cover gasket 8 012.779 1 Oil filler cap ’Jaguar’crested 9 168.201 1 Seal for filler cap 10 012.832 1 Dome nut & washer kit (52 pieces) for the cam covers & breather cover 11 168.195 26 Washer, copper 12 161.652 26 Cam & breather cover nuts 13 012.833 1 Cylinder head nuts & washer kit 14 161.651 14 Cylinder head nuts, polished & chrome plated 15 163.241 10 ‘D’ washer chrome plated 16 163.242 4 Round washer, chrome plated 17 012.639 1 Reprofiled inlet camshaft 18 012.638 1 Reprofiled exhaust camshaft 19 012.808 1 Oil thrower 20 017.117 2 Engine lifting eye 21 162.555 2 Screw ¼ “UNC, blanking plate 22 168.195 2 Washer, copper 23 012.838 1 Flanged blanking plate 24 016.599 2 Gasket, adaptor or blanking plate 25 016.594 1 Sealing ring 26 162.689 1 Screw, oil thrower plate 27 168.032 1 Washer, copper 28 016.600 1 Gasket 29 174.102 1 Locking plate 30 165.508 2 Screw, adaptor plate to Cylinder head 31 086.628 1 Rev.counter box, on inlet camshaft 32 165.509 2 Screw, Allen head 33 164.023 2 Washer, spring 34 016.601 1 Seal between cover and rear bearing cap 35 012.809 1 Adaptor piece 36 012.810 1 Driving dog 37 172.881 1 Circlip, driving dog to adaptor 38 016.602 1 ‘O’ring 39 086.624 1 Generator for electric rev. counter 40 174.103 1 Locking plate 41 164.007 3 Washer, spring 42 165.498 3 Screw, Allen head 43 016.574 1 Cylinder head gasket set 2.4 & 3.4 016.575 1 Cylinder head gasket set 3.8 016.876 1 Cylinder head gasket set 240 & 340 016.580 1 Bottom gasket set (less oil seals), all models 44 016.578 1 Head gasket 2.4, 3.4, 240 & 340 016.579 1 Head gasket 3.8 45 016.586 2 Gasket, exhaust manifold 46 016.587 1 Gasket, inlet manifold 2.4, 3.4 & 3.8 47 016.709 1 Gasket, inlet manifold 240 & 340 48 016.596 1 Gasket, breather cover 49 011.914 1 Baffle plate, breather 50 062.211 1 Flexible hose, for breather early models 51 172.605 1 Clamp, upper 52 062.349 2 Rubber breather hose 53 172.605 4 Clip, hose 54 167.293 6 Stud, front, cam cover 55 167.304 16 Stud, cam bearing cap and cam cover 56 012.839 16 Ring-dowel on stud 57 163.252 16 ‘D’washer 58 164.002 16 Washer, spring 59 161.002 16 Nut 60 011.863 3 Plug, on top of cylinder head 61 168.198 3 Washer, copper 62 167.284 18 Stud, inlet manifold 2.4 167.284 16 Stud, inlet manifold 3.4 & 3.8 167.282 2 Stud, inlet manifold 3.4 & 3.8

ILL N° PART N° QTY DESCRIPTION APPLICATION

63 164.002 18 Washer, spring 64 161.030 18 Nut, brass 65 167.280 14 Stud, exhaust manifold 2.4 167.378 2 Stud, exhaust manifold 2.4 167.284 14 Stud, exhaust manifold 3.4 & 3.8 167.378 2 Stud, exhaust manifold 3.4 & 3.8 66 164.002 16 Washer, spring 67 161.030 16 Nut, brass 68 017.272 1 Oil pipe assembly 2.4 011.878 1 Oil pipe assembly 3.4 & 3.8 69 165.415 3 Banjo bolt 70 168.200 6 Washer, copper 71 011.916 2 Core plug 72 012.807 12 Tapped guide, fit and ream 73 012.763 6 Inlet valve guide, 47.22mm oversize +0.005” 012.764 6 Inlet valve guide, bronze as above but made of bronze 012.765 6 Exhaust valve guide, 49.61mm 74 012.757 6 Inlet valve, 44.5mm, 30°,104.3mm 2.4 012.758 6 Exhaust valve, 36.57mm, 45°, 102.24mm 2.4 012.759 6 Inlet valve, 44.5mm, 45°, 105.60 3.4 & 3.8 012.760 6 Exhaust valve, 41.3mm, 45° 103.70 3.4 & 3.8 75 012.773 12 Cupped washer, valve spring 76 012.756 1 Valve spring set 77 012.767 12 Seal, valve stem if required 78 012.774 12 Collar, valve stem 79 012.775 24 Cotter, valve stem 80 012.806 12 Tappet 81 012.780 A/R Valve adjusting shim, .085” A 012.781 A/R Valve adjusting shim, .086” B 012.782 A/R Valve adjusting shim, .087” C 012.783 A/R Valve adjusting shim, .088” D 012.784 A/R Valve adjusting shim, .089” E 012.785 A/R Valve adjusting shim, .090” F 012.786 A/R Valve adjusting shim, .091” G 012.787 A/R Valve adjusting shim, .092” H 012.788 A/R Valve adjusting shim, .093” I 012.789 A/R Valve adjusting shim, .094” J 012.790 A/R Valve adjusting shim, .095” K 012.791 A/R Valve adjusting shim, .096” L 012.792 A/R Valve adjusting shim, .097” M 012.793 A/R Valve adjusting shim, .098” N 012.794 A/R Valve adjusting shim, .099” O 012.795 A/R Valve adjusting shim, .100” P 012.796 A/R Valve adjusting shim, .101” Q 012.797 A/R Valve adjusting shim, .102” R 012.798 A/R Valve adjusting shim, .103” S 012.799 A/R Valve adjusting shim, .104” T 012.800 A/R Valve adjusting shim, .105” U 012.801 A/R Valve adjusting shim, .106” V 012.802 A/R Valve adjusting shim, .107” W 012.803 A/R Valve adjusting shim, .108” X 012.804 A/R Valve adjusting shim, .109” Y 012.805 A/R Valve adjusting shim, .110” Z 83 015.717 1 Cam bearing set 84 011.913 1 Clamp, lower 85 167.294 4 Stud, breather cover 86 167.296 4 Stud, timing cover 87 016.594 1 Sealing ring at end of covers 88 200.839 1 Cam alignment tool

200.839 Cam alignment tool

Partn° Description

187.014 Primer for aluminium

187.143 Green, 2.4

187.144 Blue, 3.4 & 3.8

187.146 Gold, 4.2

© V a n G e s t e l B & C 2 0 0 512

Pistons, crankshaft and engine bearings

13© V a n G e s t e l B & C 2 0 0 5

Pistons, crankshaft and engine bearings

ILL N° PART N° QTY DESCRIPTION APPLICATION

Info: Pistons are supplied in sets of six and come complete with piston rings and piston pin. It is recommended that all pistons are measured prior to final bore finishing adding the appropriate clearance as per the manufacturer’s specifications. Piston ring sets: We supply ‘Grant’or ‘Deves’ replacements sets manufactured in the USA

1 014.840 1 Piston set STD 2.4 3 ring piston 014.842 1 Piston set 0.20” Standard bore size 83mm 014.843 1 Piston set 0.30“ Recommended clearance 014.844 1 Piston set 0.40” 0.0025”- 0.003” 014.846 1 Piston set 0.60” 014.660 1 Piston set STD 3.4 4 ring piston 014.662 1 Piston set 0.20” Standard bore size 83mm 014.663 1 Piston set 0.30“ Compression ratio 8:1 014.664 1 Piston set 0.40” Recommended clearance 0.003”-0.004” 014.670 1 Piston set STD 3.8 3 ring piston 014.672 1 Piston set 0.20” Standard bore size 87mm 014.673 1 Piston set 0.30“ Compression ratio 8:1 014.674 1 Piston set 0.40” Recommended clearance 0.005”-0.006”

014.680 1 Piston set STD 3.8 3 ring piston 014.682 1 Piston set 0.20” Standard bore size 87mm 014.683 1 Piston set 0.30” Compression ratio 9:1 014.684 1 Piston set 0.40” Recommended clearance 0.005”-0.006”

2 014.850 1 Piston ring set STD 2.4 engine, 83mm bore size 014.852 1 Piston ring set 0.20” 4 ring set 014.853 1 Piston ring set 0.30” Fits Hepolite 14914 & 014.854 1 Piston ring set 0.40” County CP409K 014.856 1 Piston ring set 0.60”

014.690 1 Piston ring set STD 3.4 engine, 83mm 014.692 1 Piston ring set 0.20” standard bore size 014.693 1 Piston ring set 0.30” 2 comp ring 2mm 014.694 1 Piston ring set 0.40” 2 oil ring 4mm 014.696 1 Piston ring set 0.60” Fits Hepolite 3 ring & County 4 ring

014.720 1 Piston ring set STD 3.8 engine, 83mm 014.722 1 Piston ring set 0.20” standard bore size 014.723 1 Piston ring set 0.30” 2 comp.ring 2mm 014.724 1 Piston ring set 0.40” 1 oil ring 4mm 014.726 1 Piston ring set 0.60” Fits Hepolite 18393, 20615,16586 & County CP411, CP411A

ILL N° PART N° QTY DESCRIPTION APPLICATION

Our piston liners are parallel boring type, semi finished bore less 1mm Fitting instructions: Measure each liner and machine the cylinder block with appropriate interference fit

3 014.669 6 Piston liner 2.4 & 3.4 engine Nominale dimensions 3.267 x 3.393 x 6.978 014.679 6 Piston liner 3.8 engine Nominale dimensions 3.425 x 3.562 x 6.980 4 015.700 1 Main bearing set STD 2.4, 3.4 & 3.8 015.701 1 Main bearing set 0.10” STD dia. 69.850/69.850mm 015.702 1 Main bearing set 0.20” 015.703 1 Main bearing set 0.30” 015.704 1 Main bearing set 0.40” 015.706 1 Main bearing set 0.60” 5 015.719 1 Thrust washer set STD 2.4. 3.4 & 3.8 015.059 1 Thrust washer set 0.004” 6 015.710 1 Conrod bearing set STD 2.4, 3.4 & 3.8 015.711 1 Conrod bearing set 0.10” 015.712 1 Conrod bearing set 0.20” 015.713 1 Conrod bearing set 0.30” 015.714 1 Conrod bearing set 0.40” 7 013.594 6 Conrod with oil feed to end bush 3.4 & 3.8 8 013.180 6 Small end bush 9 165.499 12 Bolt, con rod 10 161.669 12 Nut, self locking type 11 016.580 1 Bottom gasket set (less oil seals) all models 12 016.725 1 Sump gasket (two halfs) 13 016.618 1 Rear oil seal, rope type 14 016.573 1 Front oil seal 15 011.917 1 Improved rear oil seal kit machining crankshaft to 75mm 16 016.859 1 Oil seal only 17 013.870 1 Crankshaft 2.4 013.622 1 Crankshaft 3.4 & 3.8 18 011.124 1 Spigot bush 19 172.888 2 Dowel pin, flywheel to crankshaft 20 011.876 2 Dowel pin, clutch cover to flywheel 21 016.603 2 Rear oil seal, rope type (original) 22 165.430 10 Screw, flywheel to crankshaft 23 174.100 1 Lock plate 24 165.500 6 Plug, screw type 25 172.886 4 Key 26 011.867 1 Ring gear, for flywheel, 104 teeth 27 013.613 1 Gear, oil pump/ignition drive 28 013.614 1 Gear timing chain 29 013.626 1 Oil thrower 30 011.932 1 Distance piece 31 011.928 1 Cone 32 011.904 1 Damper, rebuild 33 011.874 1 Crankshaft pulley, single groove 017.228 1 Crankshaft pulley, double pulley 34 163.253 1 Washer special 35 174.099 1 Locking plate 36 162.008 4 Bolt, pulley to damper 37 164.031 2 Washer, shake proof 38 165.538 1 Bolt, securing pulley/damper

© V a n G e s t e l B & C 2 0 0 514

Jaguar: Timing chain, timing gear and dampers

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 012.998 2 Camshaft sprocket 2 012.848 2 Later type camshaft plate wil fit also early cars 3 013.683 2 Circlip 4 165.556 4 Screw, sprocket to camshaft 5 013.848 1 Idler sprocket, 21 teeth 6 013.849 1 Eccentric shaft 013.695 1 Plug in end of the shaft 7 013.697 1 Micro adjustment plate 8 013.692 1 Plugner pin 9 013.693 1 Spring 10 012.772 1 Intermediate sprocket & inner bush 012.847 1 Bush only 11 013.850 1 Intermediate shaft 12 013.730 A/R Shim 13 172.898 1 Clip 14 013.605 1 Upper chain,100 links 15 013.606 1 RH Upper damper 16 013.607 1 LH Upper damper 17 013.725 4 Distance tube 18 200.873 1 Chain adjusting tool 19 013.813 1 Lower chain, 68 links 2.4 & 240 013.604 1 Lower chain, 82 links 3.4, 3.8 & 340 20 013.608 1 RH lower damper, early engines 21 013.609 1 RH lower damper, late engines

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 174.158 1 Tap washer 23 013.610 1 LH lower damper 24 174.159 1 Tap washer 25 013.612 1 Tensioner assembly 26 174.110 1 Tab washer 27 011.980 1 Filter 28 016.573 1 Oil seal, front 29 016.849 1 Gasket, front 2.4 & 240 016.592 1 Gasket, front 3.4, 3.8 & 340 30 167.282 2 Stud, upper 31 168.199 2 Washer, copper 32 161.002 2 Nut 33 167.280 4 Stud, lower 34 164.031 4 Washer, shakeproof 35 161.002 4 Nut 36 162.081 A/R Bolt 1 3/8” check length 162.703 A/R Bolt 1 3/4”, check length 162.025 A/R Bolt 2 2/4” check length 37 164.002 3 Washer, spring 38 162.577 A/R Bolt 1 1/8” 165.359 1 Bolt 3/8”UNF x 1 3/8”, check length 162.674 1 Bolt 3/8”UNF x 1 3/4” check length 162.048 1 Bolt 3/8”UNF x 1 5/8” check length 39 164.006 5 Washer, spring

15© V a n G e s t e l B & C 2 0 0 5

Jaguar: Engine mountings, engine block & sump

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 017.266 1 Universal stud kit with or without lifting brackets 2 167.265 10 Stud, plain, 6.3/8” use 13 if lifting bracket is not fitted 167.272 3 Stud, plain, 6.13/16” With lifting bracket 3 167.266 1 Stud with dowel, 6.3/8” If no brackets are fitted 167.273 1 Stud with dowel, 6.13/16” with lifting brackets 4 017.273 1 RH front engine bracket 5 017.049 2 Engine mounting, standard 017.102 2 Engine mounting, uprated 6 017.274 1 LH front engine bracket 7 017.275 1 RH front engine bracket 8 017.276 1 LH flange engine bracket 9 165.503 2 Bolt, mounting to bracket 10 162.020 4 Screw, mounting to flange bracket 11 027.481 1 RH rear steady bracket 12 027.482 1 LH rear steady bracket 13 017.187 1 Steady link 14 163.362 1 Stepped washer 15 017.137 1 Mounting rubber 16 163.361 1 Stepped washer 17 161.025 1 Nut, locking 18 045.039 1 Bush, lower, standard 041.912 1 Bush, lower, Polyurethane 19 162.667 1 Bolt, lower 20 161.079 1 Nut, locking 21 027.483 1 Spring retainer, O/D gearboxes only 22 027.389 1 Spring, non O/D gearboxes 171.145 2 Spring, all other gearboxes 23 027.387 1 Rubber spring seat

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 027.398 1 Rubber centre bush 25 017.132 1 Core plug set, dish type 26 165.415 1 Bolt, oil feed 27 168.200 2 Washer, copper 28 011.921 1 Drain tap, cylinder block 29 168.198 1 Washer, copper 168.223 2 Washer, fibre 30 011.862 6 Plug, side gallery 31 168.196 6 Washer, copper 32 011.920 1 Screw, plug 33 017.277 1 Dipstick 34 011.894 1 Felt for dipstick 35 011.863 1 Plug, screwed 36 168.198 1 Washer, copper 37 011.977 2 Dowel, clutch housing location 38 011.976 2 Dowel, timing cover location 39 168.288 1 ‘O’ring between pipe & sump 40 167.376 2 Stud, fixing pipe 41 017.255 1 Oil pipe, sump to oil filter 42 017.238 1 Hose,oil return 43 173.105 2 Clamp 44 011.864 1 Oil drain plug, brass 017.141 1 Oil drain plug, magnetic 45 168.197 1 Washer, drain plug 46 162.045 1 Screw 5/16”x 5/8” short 162.005 25 Screw 5.16”x 3/4” long 47 164.002 26 Washer, spring 48 017.430 1 Core plug strap kit

© V a n G e s t e l B & C 2 0 0 516

Jaguar: Oil filter and pump

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 011.740 1 Paper oil filter & seal 2 168.004 1 Washer, felt 3 011.985 1 Spring 4 016.043 1 Rubber washer 3/8” ID 168.017 1 Rubber washer 1/2” ID 5 168.219 1 Sealing ring, comes with oil filter 6 011.995 1 Relief valve Tecalemit FA 2705, 2720, 2741 013.855 1 Relief valve Tecalemit FA 2744, 2114, 2122 7 011.996 1 Spring release valve Tecalemit FA 2741 013.857 1 Spring release valve Tecalemit FA 2744, 2114, 2122 8 011.998 1 Spider & pin ass. Tecalemit FA 2720 013.867 1 Spider & pin ass. Tecalemit FA 2741 013.866 1 Spider & pin ass. Tecalemit FA 2744 013.865 1 Spider & pin ass. Tecalemit FA 2114, 2122 9 016.838 1 Sealing ring 10 017.238 1 Hose between filter head and sump 11 172.060 2 Clamp 12 013.618 1 Drive shaft 13 172.880 1 Key, drive shaft 14 013.671 1 Drive shaft bush 15 013.633 1 Washer 16 013.616 1 Drive gear

ILL N° PART N° QTY DESCRIPTION APPLICATION

17 174.101 1 Lock tab washer 18 161.282 1 Flat nut 9/16”UNF 19 013.615 1 Coupling bush 20 013.602 1 Oil pump, large bore Use also adaptor 013.666 21 013.666 1 Adaptor piece, small to large bore 22 013.670 1 ‘O’ring small bore, for original pump 016.629 1 ‘O’ring large bore, for large pump 23 013.670 1 ‘O’ring delivery pipe 24 013.672 1 Delivery pipe 2.4 013.862 1 Delivery pipe 3.4 & 3.8 25 016.611 1 Gasket 26 013.861 1 Suction pipe 27 013.665 1 Spring 28 016.836 1 Sealing ring at bottom 29 016.619 1 Gasket, filter head Tecalemit FA 2705, 2720, 2741 30 016.846 1 Gasket, filter head Tecalemit FA 2744 31 016.847 1 Gasket, filter head Tecalemit FA 2114, 2122 32 174.141 1 Support bracket 33 013.662 2 Clip, delivery pipe 34 013.663 2 Clip, suction pipe 35 300.522 A/R 4.5L Castrol classic oil, 20W50 36 300.501 A/R 5L Penrite classic oil, 20W/60

17© V a n G e s t e l B & C 2 0 0 5

Jaguar: Cooling system

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 060.090 1 Radiator, manual & O/D models See also cooling improvement page 060.152 1 Radiator, Automatic models 2 061.419 1 Radiator filler cap, 4lbs, most common 061.021 1 Radiator filler cap, 7lbs 061.089 1 Radiator filler cap, 13lbs, ask for details 3 061.441 8 Pad, mounting 4 061.489 4 Tube, distance 5 163.383 4 Washer, plain 6 164.032 2 Washer, internal tooth 7 165.469 2 Bolt 8 161.025 2 Nut 9 159.799 1 Cowl, fibre glass 10 164.031 4 Washer, internal tooth 11 161.002 4 Nut 12 062.185 1 Overflow pipe 13 061.504 1 Radiator drain tap 14 168.101 A/R Washer, fibre 15 061.399 1 Water pump 061.329 1 Repair kit 16 016.590 1 Gasket 17 165.431 1 Bearing location screw 18 161.362 1 Lock nut 19 017.270 1 Universal fitting kit for water pump, studs, bolts, washers & nuts 20 063.390 1 Adaptor, heater water outlet 21 168.197 1 Washer, copper 22 061.333 1 Pulley, waterpump, single belt 061.538 1 Pulley, waterpump, double belt

ILL N° PART N° QTY DESCRIPTION APPLICATION

23 061.342 1 Fan 24 061.343 A/R Balance piece 25 162.022 4 Screw 26 164.002 4 Washer, spring 27 061.554 1 Fan belt, single 2.4 early models 061.514 1 Fan belt, single 3.4 & 3.8 early models 061.555 1 Fan belt, double 2.4 late models & 240 061.513 1 Fan belt, double 3.4, 3.8 late models & 340 28 062.354 1 Top hose 2.4, 3.4 & 3.8 & 240 062.358 1 Top hose 340 29 062.283 1 Bottom hose 3.4, 3.8 & 340 062.356 1 Bottom hose 2.4 & 240 30 172.265 4 Clamp 31 062.351 1 By-pass hose 2.4 062.214 1 By-pass hose 3.4 & 3.8 062.357 1 By-pass hose 240 & 340 32 172.265 2 Clamp 33 186.159 3 4L Castrol anti-freeze, up to -36° 34 061.491 1 Jockey pulley, single belt 061.492 1 Jockey pulley, double belt 35 161.021 1 Nut, locking 36 017.271 1 Carrier or lever 37 017.251 1 Bracket 38 171.137 1 Spring, belt tensioning 39 174.161 11 Thrust washer, limiting stop 40 017.252 1 Bush, fitted in bracket 41 161.330 1 Locknut, thin 42 185.127 1 Kenlowe kit

© V a n G e s t e l B & C 2 0 0 518

Jaguar: Manifolds and thermostats

ILL N° PART N° QTY DESCRIPTION

1 017.297 1 Inlet manifold 2.4 2 017.298 1 Water outlet pipe 3 018.088 1 Water outlet elbow 4 167.286 4 Stud, carburettor to manifold 5 164.002 4 Washer, spring 6 161.002 4 Nut 7 016.630 4 Gasket, water outlet pipe to manifold 8 167.084 8 Stud 9 164.002 8 Washer, spring 10 161.002 8 Nut 11 167.084 2 Stud, water elbow 12 164.002 2 Washer, spring 13 161.002 2 Nut 14 012.013 1 Thermostat, 74 C°, see also cooling improvement page 012.057 1 Thermostat, 82 C°, see also cooling improvement page 15 016.597 1 Gasket 16 063.390 1 Adaptor, heater system 17 168.197 1 Washer, copper 18 011.882 1 Inlet manifold 3.4 017.299 1 Inlet manifold 3.8. 19 167.286 8 Stud, carburettor to manifold 20 164.002 8 Washer, spring 21 161.002 8 Nut 22 012.814 1 Water outlet elbow 23 086.625 1 Thermostat, choke, not for 2.4 & 240 24 016.484 1 Gasket 25 165.561 3 Screw, UNC

ILL N° PART N° QTY DESCRIPTION

26 164.016 3 Washer, shakeproof 27 017.301 1 Inlet manifold 240 017.302 1 Inlet manifold 340 28 016.806 1 Gasket, housing to inlet manifold 29 018.070 1 Thermostat housing 30 167.084 3 Stud 31 164.002 3 Washer, spring 32 161.002 3 Nut 33 016.848 1 Gasket, thermostat 34 017.303 1 Water outlet, 240 & 340 35 167.084 2 Stud 36 164.002 2 Washer, spring 37 161.002 2 Nut 38 110.615 1 Front exhaust manifold, 2.4 & 240 39 110.616 1 Rear exhaust manifold, 2.4 & 240 40 016.730 2 Gasket 41 167.288 8 Stud, manifold 167.290 A/R Repair stud 42 164.006 8 Washer, spring 43 161.006 8 Nut, brass 44 110.623 1 Front exhaust manifold 3.4, 3.8 & 340 45 110.624 1 Rear exhaust manifold 3.4, 3.8 & 340 46 167.284 14/16 Stud, manifold, automatic cars use 16 167.378 2 Stud 47 164.002 16 Washer, spring 48 161.030 16 Nut, brass

19© V a n G e s t e l B & C 2 0 0 5

Daimler: Cylinder head, oil filter and pump

ILL N° PART N° QTY DESCRIPTION

1 018.089 2 Cylinder head, tubes for spark plug not included 2 016.879 2 Gasket rocker cover 3 016.880 8 ‘O’ring, fits between nut and rocker cover 4 016.881 1 Full gasket set, cylinder heads & engine bottom set 5 016.882 2 Cylinder head gasket 6 018.090 8 Inlet valve 7 018.091 8 Exhaust valve 8 018.092 8 Inlet valve guide 013.871 8 Inlet valve guide, modified, including valve seal 9 018.093 8 Exhaust valve guide 013.872 8 Exhaust valve guide, modified, including valve seal 10 013.873 8 Valve spring, inner 11 013.874 8 Valve spring, outer 12 013.875 8 Push rod, inlet 13 013.876 8 Push rod, exhaust 14 018.094 8 Rocker, inlet 15 018.095 8 Rocker, exhaust

ILL N° PART N° QTY DESCRIPTION

16 018.096 16 Spring, rocker 17 018.097 20 Bolt, cylinder head to engine block 18 018.098 16 Tappet 19 011.038 1 Oil filter element & seals 20 168.219 1 Sealing ring 21 168.217 1 Felt washer 22 016.043 1 Washer, rubber 23 016.883 1 Gasket, filter head to engine block 24 013.877 1 Oil pump 25 016.884 1 Gasket, oil pump 26 013.878 1 Spring, relief valve 27 013.879 1 Relief valve 28 018.099 1 Spiral gear, oil pump 29 300.522 1 4.5L Castrol classic oil, 20W/50 30 300.501 1 5L Penrite classic oil 31 018.100 16 Ball end for tapped

Daimler

© V a n G e s t e l B & C 2 0 0 520

Daimler: Engine block parts and engine mountings

ILL N° PART N° QTY DESCRIPTION

1 014.902 1 Piston set,.+020” 014.904 1 Piston set, +040” 2 014.930 1 Piston ring set, STD 014.932 1 Piston ring set, 020” 014.934 1 Piston ring set, 040” 3 015.290 1 Main bearing set, STD 015.291 1 Main bearing set, .010” 015.292 1 Main bearing set, .020” 015.293 1 Main bearing set, .030” 015.294 1 Main bearing set, .040” 4 015.745 1 Thrust washer set, STD 015.746 1 Thrust washer set, .0025” 015.747 1 Thrust washer set, .005” 5 015.300 1 Conrod bearing set, STD 015.301 1 Conrod bearing set, .010” 015.302 1 Conrod bearing set, .020” 015.303 1 Conrod bearing set, .030” 015.304 1 Conrod bearing set, .040” 6 013.880 8 Small end bush 7 016.881 1 Full gasket set, cylinder heads & engine bottom set 8 013.881 1 Crankshaft

ILL N° PART N° QTY DESCRIPTION

9 011.124 1 Spigot bush, manual gearbox 017.304 1 Spigot bush, automatic gearbox 10 017.305 1 Crankshaft damper 11 017.306 1 Hub, camshaft damper 12 017.307 1 Pulley, manual steering 13 015.748 1 Camshaft bearing kit 14 013.882 1 Timing chain 15 013.612 1 Hydraulic chain tensioner 16 017.308 1 Timing cover 17 016.885 1 Gasket, timing cover 18 017.309 1 Oil feed pipe, block and cylinderhead 19 165.428 1 Banjo bolt, long 20 165.427 4 Banjo bolt, short 21 168.291 10 Washer, copper 22 018.101 1 Oil filler cap 23 011.865 1 Oil drain plug 24 168.197 1 Washer 25 017.049 2 Engine mounting 017.102 2 Engine mounting, uprated 26 086.624 1 Generator for electric rev. counter

Daimler

21© V a n G e s t e l B & C 2 0 0 5

Daimler: Cooling system

ILL N° PART N° QTY DESCRIPTION

1 060.156 1 Radiator, manual & O/D models 060.157 1 Radiator, Automatic models 2 061.481 1 Radiator filler cap, 4lbs 3 061.441 8 Pad, mounting 4 061.489 4 Tube, distance 5 163.383 4 Washer, plain 6 164.032 4 Washer, internal tooth 7 165.469 4 Bolt 8 161.025 2 Nut 9 062.185 1 Overflow pipe 10 061.504 1 Radiator drain tap 11 168.101 A/R Washer, fibre 12 012.013 1 Thermostat 74C° 012.057 1 Thermostat 82C°, cold climate/winter 13 016.597 1 Gasket 14 017.310 1 Water outlet elbow 15 162.090 2 Screw 16 164.002 2 Washer, spring

ILL N° PART N° QTY DESCRIPTION

17 018.054 1 Temperature transmitter 18 1 See engine gasket set 19 061.581 1 Repair kit for water pump 061.483 1 Water pump, new 20 016.886 1 Gasket, waterpump 21 165.431 1 Screw, location 22 161.362 1 Lock nut 23 164.007 1 Washer, shakeproof 24 061.522 1 Belt, water pump 25 061.491 1 Jockey pulley 161.021 1 Lock nut 26 061.577 1 Belt, dynamo 061.578 1 Belt, alternator 27 061.579 1 Top hose 28 061.580 1 Bottom hose 29 172.268 4 Clamp 30 016.887 2 Gasket, manifold

Daimler

© V a n G e s t e l B & C 2 0 0 522

Jaguar and Daimler: Heater system

ILL N° PART N° QTY DESCRIPTION

1 063.567 1 Heater motor 2 063.568 1 Runner, fan 3 063.585 6 Grommet, fan motor 4 122.500 3 Grommet, heater box to bulkhead 164.012 3 Washer, spring 161.019 3 Nut 5 088.037 1 Resistor, heater motor 6 121.893 1 Pad, heater box to body 7 063.569 1 Heater matrix 8 063.586 2 Pad 9 063.587 1 Internal seal kit, felt 10 171.131 2 Spring, air control flap 11 063.588 1 Seal, heater box to bulkhead 12 063.497 1 Heater valve 13 168.100 1 ‘O’ring 14 062.367 2 Hose, elbow 15 063.565 1 Feed pipe, Jaguar 063.589 1 Feed pipe, Daimler 16 062.361 1 Hose, Jaguar 063.590 1 Hose, Daimler 17 063.390 1 Adaptor, not Daimler 18 168.197 1 Washer, not Daimler

ILL N° PART N° QTY DESCRIPTION

19 063.564 1 Return pipe, rear, Jaguar 063.591 1 Return pipe, rear, Daimler 20 062.361 1 Hose 21 063.540 1 Return pipe, front, Jaguar 063.592 1 Return pipe, front, Daimler 22 063.261 1 Hose 23 172.060 A/R Clamp 24 063.570 1 Air hose, RH 25 063.571 1 Air hose, LH 26 063.488 2 Escutcheon 27 161.024 4 Nut 28 063.593 2 Knob 165.931 2 Screw, fixing knob 29 134.098 2 Cable, control, cut to length 30 122.014 2 Grommet 31 063.594 1 Cable clamp 32 163.007 1 Washer, plain 33 161.024 1 Nut 34 107.039 2 Clip, retaining control cable 35 172.056 1 Trunnion 36 162.135 1 Screw

Foto 159.902

23© V a n G e s t e l B & C 2 0 0 5

Fuel tank, pipes, lines and hoses

ILL N° PART N° QTY DESCRIPTION

1 100.086 1 Fuel tank 2 108.277 1 Filter, fuel tank 3 168.256 1 Gasket for filter 4 108.426 1 Grommet 5 108.411 1 Filler cap 6 101.057 1 Filler cap, alternative 7 101.596 1 Filler cap & lock 8 041.760 6 Mounting pad 9 061.422 3 Tube, distance 163.014 3 Washer, plain 161.337 3 Nut, locking 10 108.427 1 Sending unit 11 016.024 1 Gasket 12 108.593 1 Screw & washer kit 13 101.652 1 Fuel pump, LCS 101.052 1 Fuel pump, AUF305, some late 240 & 340 models 14 108.231 1 Mounting kit 15 102.079 2 Banjo bolt 16 102.080 4 Washer, fibre 17 108.428 1 Hose, tank to pump 18 102.019 1 Grommet 19 108.429 1 Hose, pump to fuel line 20 161.067 1 Nut, alternative 21 172.966 3/5 Clip, pipe to body 22 173.072 7 Clip, pipe to body 23 101.977 1 Fuel filter assembly 101.983 1 Fuel filter only, 38mm dia 108.248 1 Fuel filter only, 50mm dia 24 101.986 2 Banjo bolt 25 168.223 4 Washer, fibre 26 108.611 1 Fuel line kit, needs some modification for Daimler V8

ILL N° PART N° QTY DESCRIPTION

27 101.963 1 Fuel hose, flexible 28 108.613 1 Fuel pipe, from flex hose to filter 29 108.614 1 Fuel pipe, from filter to carbs. 30 108.615 1 Fuel pipe, nylon, filter to carb. pipe 31 108.616 1 Fuel pipe, carb. to carb. 32 101.976 1 Fuel hose, filter to carb. pipe 33 101.975 1 Fuel pipe, carb. to carb. 34 108.617 1 Fuel pipe, nylon, filter to carb. pipe 35 101.975 1 Fuel pipe, carb. to carb. 36 108.618 1 Fuel pipe, filter to carbs., Daimler V8 37 102.079 A/R Banjo bolt, fuel pipe to carbs. 38 102.080 A/R Washer, fibre 39 109.011 2 Banjo bolt, fuel pipe to carbs., 2.4 40 168.292 2 Washer, fibre, large 41 168.293 2 Washer, fibre, small 42 109.012 2 Filter

© V a n G e s t e l B & C 2 0 0 524

Carburettors, service kits and tools

ILL N° PART N° QTY DESCRIPTION

1 109.010 1 Pair Solex carburettors, 2.4 2 107.007 1 Pair HD6 carburettors 1.3/4”, 3.4 & 3.8 less needle 3 107.167 1 Pair HS6 carburettors 1.3/4”, 240 4 330.070 1 125ml carburettor oil 5 102.278 2 Oversize shaft for HD6 carburettors 102.281 2 Oversize shaft for HS6 carburettors 6 102.275 1 Reamer tool for OVERSIZE shaft only. This tool can be used on all SU’s: HD & HS types. Once you have this tool, you can easily repair worn out carburettors when an oversize shaft is required 7 200.572 1 Carburettor synchronizer 8 102.302 1 SU tool kit, 3 piece 9 102.216 A/R Grose jet: Improvement for the standard needle and seat. This efficient fuel cut-off is based on a ball system

ILL N° PART N° QTY DESCRIPTION

10 190.225 1 Book, SU carburettors. For maintaining, tuning and restoration. Also includes SU fuel pump repair. 11 198.015 1 Carburettor cleaner spray, for restoration and maintenance 12 109.009 2 Gasket pack, for one Solex carburettor 13 109.001 2 Service kit, for one Solex carburettor 14 109.008 1 Rebuilding kit, for one pair carburettors 15 102.713 2 Gasket pack, for one HD6 1.3/4” 16 102.710 2 Service kit, for one HD6 1.3/4 17 102.712 2 Rebuilding kit, for one HD6 1.3/4 18 102.316 2 Sundries kit, for one HD6 1.3/4 19 102.434 2 Gasket pack, for one HS6 1.3/4 20 107.168 1 Service kit, for two HS6 1.3/4 21 107.169 1 Rebuilding kit, for two HS6 1.3/4 22 102.259 2 Sundries kit, for one HS6 1.3/4

25© V a n G e s t e l B & C 2 0 0 5

Solex carburettor parts

ILL N° PART N° QTY DESCRIPTION

1 109.010 1 Pair Solex carburettors 2 016.888 4 Gasket 3 016.889 2 Spacer, insulator 4 164.002 4 Washer, spring 5 161.002 4 Nut, carburettor to manifold 6 109.011 2 Banjo 7 168.292 2 Washer, large 8 109.012 2 Filter, fits on banjo

ILL N° PART N° QTY DESCRIPTION

9 168.293 2 Washer, small 10 109.013 2 Needle and seat 11 109.014 2 Float 12 See tool catalogue 190.028 13 109.009 2 Gasket pack, for one carburettor 14 109.001 2 Service kit, for one carburettor 15 109.008 1 Rebuild kit, for two carburettors

109.009 Gasket set109.008 Rebuilding kit

109.001 Service kit

© V a n G e s t e l B & C 2 0 0 526

Carburettor parts HD6

ILL N° PART N° QTY DESCRIPTION

1 016.222 2 Gasket, air intake 2 016.250 4 Gasket 3 016.261 2 Insulator 4 164.002 8 Washer, spring 5 161.002 8 Nut 6 107.008 2 Damper with solid brass cap 102.343 2 Damper, black plastic, late models 7 102.080 2 Washer, fibre 8 102.012 6 Screw, zinc plated 9 102.010 2 Spring 10 102.011 2 Washer under spring 11 107.170 2 Needle, SC, Jaguar 107.171 2 Needle, TM, Jaguar 107.009 2 Needle, TL, Jaguar 102.818 2 Needle, TZ, Daimler V8 12 102.007 2 Screw, needle locking 13 102.754 2 Slow running adjustment kit 14 102.756 2 Gasket 15 107.030 1 Adaptor for push-on connector 16 102.012 2 Screw 17 164.015 2 Washer, spring 18 102.746 2 Bearing kit, jet 19 102.745 2 Housing for jet 20 102.742 2 Jet assembly & diaphraghm 0.100” 21 102.741 2 Spring, diaphraghm 22 102.044 2 Adjusting screw 23 102.045 2 Spring 24 102.767 8 Bolt, chamber mounting 25 164.015 8 Washer, spring 26 107.012 1 Front float chamber 107.012 1 Rear float chamber 102.784 1 LH 30° float chamber, Daimler 102.785 1 RH 30° float chamber, Daimler 27 102.068 2 Float 28 102.330 2 Lever 29 102.074 2 Pin 30 102.315 2 Needle & seat 102.389 2 Needle & seat with viton head 102.216 2 Grose jet 31 102.071 2 Gasket

ILL N° PART N° QTY DESCRIPTION

32 102.331 1 Lid, rear, AUC 4260 102.070 1 Lid, rear, AUD 2283 102.332 1 Lid, front, AUC 4261 102.069 1 Lid, front, AUD 2284 107.173 1 LH lid, AUD 9238, Daimler V8 107.174 1 RH lid, AUD 9579, Daimler V8 33 102.077 2 Overflow pipe, cut to length 34 102.075 2 Cap nut, brass 35 102.076 2 Washer, aluminium 36 102.078 2 Washer, fibre 37 102.079 2 Banjo bolt 38 102.080 4 Washer, fibre 39 102.082 2 Filter 40 102.629 2 Shaft, standard 41 102.348 4 Repair bush, ream body to 9.5mm 42 102.265 2 Disc 1.3/4” 43 102.050 4 Screw 44 102.760 1 Thermostat body 45 102.761 1 Jet, acceleration needle 46 107.059 1 Dust shield fixing kit 47 102.768 1 Acceleration needle 48 102.770 1 Spring 49 102.766 1 Washer kit 50 102.079 1 Banjo bolt 51 102.765 1 Banjo bolt 52 102.763 1 Bracket 53 102.764 1 Connection arm 54 107.014 1 Solonoid assembly 55 102.773 1 Cap, solenoid 56 102.774 1 Strap 57 103.286 1 Screw, clamping 58 102.855 1 Connection rod 4.7cm 59 102.324 2 Coupling assembly 60 102.055 4 Bolt 61 102.056 4 Washer, plain 62 102.057 4 Nut 63 107.022 1 Lever 64 102.048 1 Bolt 65 164.015 1 Washer, spring 66 161.072 1 Nut 67 171.133 1 Throttle return spring, most common

27© V a n G e s t e l B & C 2 0 0 5

Carburettor parts HS6, 240 models only

ILL N° PART N° QTY DESCRIPTION

1 016.251 2 Gasket, air intake 2 016.485 4 Gasket 3 101.970 2 Insulator 4 164.002 8 Washer, spring 5 161.002 8 Nut 6 102.343 2 Damper, black plastic 7 102.080 2 Washer, fibre 8 102.012 6 Screw, zinc plated 9 102.010 2 Spring 10 107.009 2 Needle, TL 11 102.007 2 Screw, needle locking 12 102.044 2 Adjusting screw 13 102.045 2 Spring 14 102.003 2 Piston lifting kit 15 107.103 1 Jet, front 107.104 1 Jet, rear 16 102.440 2 Gland rubber 17 102.123 2 Bearing, jet 18 102.124 2 Washer, brass 19 102.125 2 Screw, jet locking 20 102.016 2 Spring 21 102.126 2 Screw, jet adjusting 22 102.264 2 Shaft, standard size 23 102.113 2 Bush kit, ream carb. body to 9.5mm 24 102.265 2 Disc 1.3/4” 25 102.050 4 Screw, disc 26 102.425 2 Washer, brass 27 102.115 2 Lever, lost motion 28 102.570 2 Tab washer 29 102.116 2 Nut, lever 30 102.110 2 Screw, throttle stop 31 102.045 2 Spring 32 102.596 2 Bracket, linkage to jet 33 102.594 2 Screw

ILL N° PART N° QTY DESCRIPTION

34 102.130 1 Spring, pick-up lever, front carb. 102.145 1 Spring, pick-up lever, rear carb. 35 102.131 1 Spring, lever cam, front carb. 102.144 1 Spring, lever cam, rear carb. 36 102.136 2 Pivot bolt. 37 102.135 2 Washer, spring 38 102.134 2 Tube 39 165.530 2 Bolt, float chamber to body 40 164.012 2 Washer, spring 41 163.010 2 Washer, plain 42 102.564 2 Chamber, float 102.800 1 Adaptor, float camber to front carb. body 102.801 1 Adaptor, float camber to rear carb. body 43 102.315 2 Needle & seat, standard 102.156 2 Needle & seat, viton point 102.216 2 Grose jet, improvement 44 102.107 2 Float, later type 45 102.074 2 Pin 46 102.237 2 Gasket 47 102.104 1 Lid, front float camber 102.138 1 Lid, rear float camber 48 102.012 6 Screw 49 164.015 6 Washer, spring 50 102.324 2 Coupling assembly 51 102.055 8 Bolt 52 102.056 8 Washer, plain 53 102.057 8 Nut 54 See tool catalogue(190.058), page carburettor linkage & rods

© V a n G e s t e l B & C 2 0 0 528

Jaguar: Air filters, housing and accelerator linkage

ILL N° PART N° QTY DESCRIPTION

1 108.619 2 Seal, air intake box to carburettors 2 108.620 1 Seal, top 3 108.621 1 Seal, bottom 4 016.222 2 Gasket 5 108.590 1 Air filter element, 240 6 016.858 2 Gasket 7 108.330 1 Rubber, connection 8 108.622 1 Drain tube set, except adaptors 9 173.119 1 Clip 10 108.623 1 Hose, from coupling inner wing to air silencer 11 108.624 1 Hose, air cleaner to coupling 12 172.910 4 Clamp 13 108.327 1 Air filter element, 3.4 & 3.8 14 108.328 1 Rubber, connection

ILL N° PART N° QTY DESCRIPTION

15 108.329 1 Seal, air filter 16 161.796 1 Wing nut 17 164.006 1 Washer, spring 18 108.289 1 Air filter element, 340 19 108.589 1 Rubber, connection 20 108.625 1 Air hose 21 108.134 1 Rubber pad, accelerator pedal 22 108.051 2 Felt washer 23 108.137 1 Roller 24 027.425 1 Pedal rubber 25 108.150 1 Bearing 26 171.084 1 Spring, throttle return 27 101.957 1 Control rod assembly

29© V a n G e s t e l B & C 2 0 0 5

Daimler: Air filters, housing and accelerator linkage

ILL N° PART N° QTY DESCRIPTION

1 108.626 1 Air filter element, up to Sept 1967 2 161.823 1 Wing nut 3 168.294 1 Washer, fibre 4 108.627 1 Gasket, air filter 5 108.628 1 LH breather hose 6 108.629 1 RH breather hose 7 172.039 4 Clamp 8 108.630 2 Seal, coupling 9 016.222 2 Gasket 10 108.631 2 Air filter element, Sept 1967 on 11 161.824 2 Wing nut

ILL N° PART N° QTY DESCRIPTION

12 163.395 2 Washer, plain 13 062.348 2 Hose, air filter housing to pipe 14 108.633 2 Hose, pipe to rocker cover 15 108.134 1 Rubber pad, accelerator 16 108.051 2 Felt washer 17 108.137 1 Roller 18 101.957 1 Control rod assembly 19 101.957 2 Control rod assembly, need some modification 20 171.163 1 Throttle return spring 21 101.957 2 Control rod assembly, need some modification

Daimler

© V a n G e s t e l B & C 2 0 0 530

Jaguar: Exhaust system

ILL N° PART N° QTY DESCRIPTION

1 110.596 1 Exhaust system, 2.4, 1959-67, fixing material not included 2 110.597 1 Front pipe 3 110.598 1 Silencer 4 110.599 1 Tail pipe 5 110.600 1 Pollished pipe trim 6 111.301 1 Exhaust fitting kit 7 016.730 2 Exhaust sealing ring 8 163.005 8 Washer, plain 9 161.006 8 Nut 10 111.078 1 Clamp 11 111.217 2 Silencer mounting 12 111.304 1 Clamp 13 111.305 1 Bracket, mounting to body 14 111.217 1 Mounting, tail pipe 15 162.762 1 Screw set, 5/16 UNF, set of 10 screws, 10 nuts, 10 plain washers & 10 spring washers 16 110.425 1 Exhaust system, 3.4, 3.8 & 340, 1959-67, fixing material not included

ILL N° PART N° QTY DESCRIPTION

17 110.480 1 Front pipe LH 18 110.479 1 Front pipe RH 19 110.481 1 Twin silencer 20 110.482 1 Tail pipe 21 111.302 1 Exhaust fitting kit, Ill. No. 23, 25, 26 & 28 not included 22 111.011 4 Clamp 23 111.306 2 Bracket, mounting ring 24 111.291 2 Rubber mounting 25 111.307 1 Bracket, rubber mounting 111.303 4 Insulation washer 26 111.300 1 Bracket tail pipe 27 111.291 1 Rubber mounting 28 111.309 1 Bracket tail pipe, wheel arch side 29 110.424 1 Exhaust system 240, 1967-69, fixing material not included 30 110.478 1 Front pipe LH 31 110.477 1 Front pipe RH

31© V a n G e s t e l B & C 2 0 0 5

Daimler: Exhaust system

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 110.427 1 Exhaust system, fixing material and heat shields not included 2 110.493 1 RH front pipe 3 110.494 1 LH front pipe 4 110.495 1 Balance pipe 5 110.496 2 Link pipe 6 110.497 1 RH rear section 7 110.498 1 LH rear section 8 110.499 2 Tail pipe 9 111.310 1 Exhaust fitting kit

ILL N° PART N° QTY DESCRIPTION APPLICATION

10 016.730 2 Exhaust sealing ring 11 163.005 8 Washer, plain 12 161.006 8 Nut, brass 13 111.304 4 Clamp 14 111.312 2 Clamp, balance pipe 15 111.217 2 Mounting, silencer 16 135.629 1 UNF screw set, set of 160 pieces: for clamps, mountings and 40 screws, 40 nuts, 40 plain washers heat shields & 40 spring washers 17 111.313 2 Mounting, rear silencer

Daimler

© V a n G e s t e l B & C 2 0 0 532

Jaguar: Ignition system

ILL N° PART N° QTY DESCRIPTION

1 181.077 1 2.4 Distributor DMBZ6A LU 40557, 24-26° 2 081.708 1 Vacuum unit for above distributor 1 181.075 1 2.4 Dist. DMBZ6A LU 40528, 22° 2 181.078 1 Vacuum unit for above distributor 1 181.076 1 2.4 Distributor 22D6 LU 40884, 2 181.079 1 Vacuum unit for above distributor 1 181.022 1 240 Distributor 25D6 LU 41208, 10-12° 2 181.025 1 Vacuum unit for above distributor 1 081.704 1 340 & 3.8 Distributor DMBZ6A LU 40640, 17-19° 2 181.080 1 Vacuum unit for above distributor 1 181.019 1 3.4 & 3.8 Distributor 22D6 LU 40885, 18-20° 2 181.024 1 Vacuum unit for above distributor 1 181.020 1 3.4, 3.8 & 340 Distributor 22D6 LU 41063, 18-20° 2 181.024 1 Vacuum unit for above distributor 1 181.021 1 3.4 & 340 Distributor 22D6 LU 41064, 10-13° 2 081.371 1 Vacuum unit for above distributor 1 081.705 1 3.8 Distributor DMBZ6A LU 40665 2 081.548 1 Vacuum unit for above distributor 3 081.716 1 Distributor cap for DMBZ6A 4 081.357 1 Distributor cap for 22D6, screw-on 5 081.163 1 Distributor cap for 22D6, push-on, alternative to above

ILL N° PART N° QTY DESCRIPTION

6 081.167 7 Replacement nut 7 081.072 7 Special washer 8 081.161 1 Rotor arm 9 081.509 1 Contact set, for DMBZ6A distr. 081.016 1 Contact set, for 22D6 10 081.017 1 Condensor 11 081.052 1 Earth lead 12 081.148 1 Terminal assembly, for DMBZ6A 13 081.049 1 Terminal & lead, for 22D6 14 016.614 1 Cork sealing ring, for DMBZ6A 081.061 1 ‘O’ ring, rubber, 22D6 15 081.763 1 Screw kit for contact set, base plate & condensator, 22D6 only 16 086.632 1 Vacuum pipe, early models 17 081.091 1 Black nylon tubing 081.559 1 Copper tubing, 90cm 18 081.092 1 90° Rubber end piece 19 081.064 1 Straight rubber connection 1/8” both ends 081.065 1 Straight rubber connection 1/8”-3/16” 20 081.965 1 H.T. lead kit with’Champion’ caps, screw-in 181.046 1 H.T. lead kit with’Champion’ caps, push-in 181.029 1 H.T. lead kit with modern end caps 181.065 1 H.T. lead kit COMPETITION, screw-in 21 081.481 6 ‘Champion’ cap

Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will remain permanently tuned. The engine will start better, last longer and run more economically through improved efficiency. There are only three components, very compact and simple to fit.

Power module086.082

086.462 Fitting kit for DMBZ distributors from 1961-’63086.081 Fitting kit 22D6 from 1963-’71

185.743 Aluminium spacer blockSpark plug wire holder, made from solid aluminium

ILL N° PART N° QTY DESCRIPTION

22 080.223 1 5 m copper core ignition lead, black 080.224 1 5 m Competition copper core ignition lead, yellow with black tracer 23 081.674 1 Cable conduit 24 081.960 1 Black plastic cable sleeve 25 081.951 3 Thin cable separator 081.950 2 Thick cable seperator 26 081.949 1 Clip for cable separator 27 081.990 1 Cable grommet 28 181.030 1 Bracket, cable grommet 29 081.561 1 Cable indicator set, yellow & black print, not original, but practical 30 012.058 6 ‘Champion’ Spark plug 012.389 6 NGK Spark plug 31 081.194 1 Ignition coil, screw-in 32 081.001 1 Ignition coil, push-in 081.195 1 Ignition coil, SPORT, push-in 33 081.534 A/R Dust cover, end caps & coil 34 081.502 1 Brass connector, coil end 35 081.535 1 Brass staple 36 181.007 1 Ignition coil bracket 37 181.031 1 Extension bracket

33© V a n G e s t e l B & C 2 0 0 5

Daimler: Ignition system

ILL N° PART N° QTY DESCRIPTION

1 181.081 1 Distributor 40676K-20.D8 2 181.082 1 Vacuum unit 3 181.041 1 Cap 4 181.042 1 Rotor arm 5 181.044 1 Contact set 6 181.043 1 Condensor 7 081.341 1 Vacuum pipe with a nipple on one end only 8 081.064 1 Straight rubber connection, 1/8” both ends 081.065 1 Straight rubber connection, 1/8”-3/16” 9 081.091 1 Black nylon tubing, not original 081.559 1 Copper tubing, 90cm 10 081.092 1 90° Rubber end piece 11 181.083 1 H.T. Lead kit 12 081.481 8 ‘Champion’ cap

ILL N° PART N° QTY DESCRIPTION

13 080.223 1 5 meter copper core ignition lead, black outside 080.224 1 5 meter Competition copper core ignition lead, yellow with black tracer 14 1 Cable indicator set, yellow & black print, not original, but practical 15 012.005 8 Spark plug ‘Champion’ N5 181.084 8 Spark plug extension 16 081.194 1 Ignition coil, screw-in 17 081.167 9 Replacement nut 18 081.072 9 Special washer 19 081.001 1 Ignition coil, push-in 081.195 1 Ignition coil, SPORT, push-in 20 081.534 1 Dust cover 21 081.502 1 Brass connector, coil end 22 081.355 1 Brass staple

Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will remain permanently tuned. The engine will start better, last longer and run more economically through improved efficiency. There are only three components, very compact and simple to fit.

Power module086.082

088.276Fitting kit for distributors

Daimler

© V a n G e s t e l B & C 2 0 0 534

ILL N° PART N° QTY DESCRIPTION

22 052.005 1 Filler cap 23 161.002 2 Nut 24 164.031 2 Washer, internal shakeproof 25 172.367 1 Clevis pin 26 052.043 1 Repair kit 27 027.376 1 Slave cylinder, ‘A’= 80mm 027.375 1 Slave cylinder, ‘A’= 97mm, all synchromesh gearbox 28 161.026 2 Nut 29 164.006 2 Washer, spring 164.032 2 Washer, shakeproof 30 167.383 2 Stud, slave cylinder mounting 31 027.072 1 Repair kit 32 054.765 1 Clutch hose 33 161.009 2 Nut 34 164.032 2 Washer shakeproof 35 027.426 1 Clutch lever 36 027.427 1 Shaft 37 165.431 1 Screw, securing fork to shaft 38 161.019 1 Lock nut 39 026.091 1 Cover timing aperature

Clutch system

ILL N° PART N° QTY DESCRIPTION

1 021.119 1 Clutch cover, coil spring, 10” 2 021.091 1 Clutch plate 3 021.120 1 Release bearing 4 021.002 2 Retainer, release bearing 5 162.525 6 3/8”x 7/8”UNF screw 6 164.006 6 Washer, spring 7 021.131 1 Clutch kit, diaphragm type, 9.5” 8 021.132 1 Release bearing 9 162.022 6 5/16”x 7/8”UNF screw 10 164.002 6 Washer, spring 11 021.085 1 Clutch cover, coil spring, 9” 12 021.092 1 Clutch plate 13 021.120 1 Release bearing 14 021.151 1 Clutch cover, coil spring 9” 15 021.152 1 Clutch plate 16 027.425 1 Pedal rubber, JAGUAR 17 027.490 1 Pedal rubber, DAIMLER 18 027.479 2 Pedal bush 19 171.161 1 Pedal spring 20 021.191 1 Release bearing 21 053.478 1 Clutch master cylinder, incl. Ill. No.22

ILL N° PART N° QTY DESCRIPTION

40 027.430 1 Adjuster, need some adjusting 41 027.429 1 Pivot pin, need some adjusting 42 173.075 1 Clip, pivot pin securing 43 171.119 1 Return spring 44 163.365 1 Plate 45 024.669 1 Cover plate 46 016.733 1 Oil seal 47 174.138 1 Lock tab set, bellhousing to gearbox 48 162.667 6 Bolt 49 027.309 1 RH support bracket 50 027.310 1 LH support bracket 51 027.491 1 Bolting kit, clutch housing to engine block, also for Ill. No. 49, 50 52 200.846 1 Clutch aligning tool

35© V a n G e s t e l B & C 2 0 0 5

Moss gearbox, 3 synchro 4 speed, up to Sept. 1965

ILL N° PART N° QTY DESCRIPTION

1 016.649 1 Gasket set 2 024.541 1 Magnetic drain plug, or filler plug at side 017.017 2 Standard plug 168.197 2 Washer, copper 3 026.150 1 Pair felt bushes, dipstick 4 024.708 1 Bush for pivot jaw 5 024.711 1 Double spring washer 6 161.111 1 Nut, slotted 7 024.712 1 Pin, selector lever 8 024.713 1 Bush 9 161.111 1 Nut, slotted 10 024.705 2 Flexible bushing, vertical 11 161.092 1 Nut, slotted 12 024.539 1 Gear change lever 13 024.837 1 Gear lever knob 14 161.698 1 Locking nut for knob 15 122.538 1 Gear lever gaiter 16 026.219 1 Ring, gaiter

ILL N° PART N° QTY DESCRIPTION

17 083.052 A/R Switch, reverse light/overdrive 18 168.023 A/R Gasket/shim, for switch adjustment 19 016.733 1 Oil seal 20 023.281 1 Bearing, front 21 024.789 1 Bearing, centre 22 024.790 1 Circlip, securing bearing 23 016.654 1 Oil seal, rear, only non O/D models 24 161.662 1 Nut, rear flange 25 024.734 1 Roller bearing, first motion shaft 26 024.178 82 Needle roller, 2nd & 3rd

27 024.751 58 Needle roller, laygear 28 024.749 1 Layshaft 29 024.728 2 Spring under plunger 30 024.727 2 Plugner 31 024.728 12 Spring 32 024.692 12 Ball 33 016.801 1 ‘O’ring 34 300.111 2 1L gearbox oil 30 300.511 1 5L gearbox oil 30

© V a n G e s t e l B & C 2 0 0 536

‘A’ type overdrive for Moss 3 synchro 4 speed gearbox, up to 1965

ILL N° PART N° QTY DESCRIPTION APPLICATION

Overdrive repair service: We remanufacture your own unit, normally within two weeks. It is possible to have your overdrive repaired to the original specification or to uprated competition spec. All overdrives are rig tested and come with a six month warranty. Overdrive parts listed below are the most common but other parts are available on request as well.

1 020.252 1 Rebuild overdrive 28/1369 2.4 models 020.253 1 Rebuild overdrive 28/1474 3.4 models 020.254 1 Rebuild overdrive 28/3028 3.8 models 2 016.499 1 Gasket and seal kit 3 025.447 1 Set of 8 clutch return springs 2.4/3.4 models 025.386 1 Set of 4 short and 8 long clutch return spring 3.8 models 4 081.281 1 Solenoid assembly 5 025.371 1 Adaptor, not supplied with overdrive 6 025.372 1 Steel washer behind g/box rear bearing 7 172.927 1 Circlip 1.3/8” 8 025.375 1 Operating cam 9 025.214 1 Circlip 1.7/8” 10 025.388 1 Bearing 11 025.216 1 Circlip 90mm 12 025.387 1 Sliding member, exchange 13 025.163 1 Accumulator housing, 2.4/3.4 025.404 1 Accumulator housing, 3.8 14 025.379 1 Set of 6 accumulator piston rings 2.4/3.4 025.403 1 Set of 6 accumulator piston rings 3.8 15 025.378 1 Accumulator piston 2.4/3.4 025.402 1 Accumulator piston 3.8

ILL N° PART N° QTY DESCRIPTION APPLICATION

16 025.452 1 Accumulator pressure spring 2.4 025.444 1 Accumulator pressure spring 3.4 17 025.406 1 Accumulator pressure spring, small 3.8 18 025.409 1 Accumulator pressure spring, large 3.8 19 025.381 1 Accumulator tube 2.4/3.4 025.405 1 Accumulator tube 3.8 20 025.391 1 Planetary carrier assembly 21 025.369 1 Complete UDC assembly 22 025.069 1 Bronze thrust washer 23 025.448 1 Annulus 24 041.632 1 Bearing, annulus 25 025.125 1 Bearing, rear 26 025.126 1 Oil seal 27 161.303 1 Nut 28 025.390 1 Sun gear 29 025.170 1 Filter 30 025.167 1 Plunger, oil pump 31 025.042 1 Spring 32 025.168 1 Body, oil pump 33 025.179 2 Operating piston 34 025.450 1 Speedo meter drive pinion 35 025.451 1 Bush 36 023.027 1 Ball 37 025.182 1 Spring 38 025.107 1 Ball

37© V a n G e s t e l B & C 2 0 0 5

All synchro gearbox, Sept. 1965 on

ILL N° PART N° QTY DESCRIPTION

1 016.860 1 Gasket set 2 024.541 1 Magnetic drain plug & washer 017.017 1 Drain plug + use 168.230 washer, fibre 3 017.017 1 Filler plug 4 168.230 1 Washer, plug 5 024.708 1 Bush for pivot jaw 6 024.711 1 Double spring 7 161.079 1 Locking nut 8 026.160 1 Pivot pin 9 024.713 1 Bush, horizontal 10 161.079 1 Locking nut, pivot pin 11 026.094 1 Gear lever knob 12 161.661 1 Chrome locking cone, nut 13 026.157 1 Washer, upper 14 026.095 1 Bush, upper 15 026.096 1 Bush, lower 16 161.012 1 Nut, nyloc 17 122.538 1 Gear lever gaiter 18 026.219 1 Ring, gaiter 19 083.052 A/R Switch, reverse/o/d 20 168.023 A/R Washer, adjusting 21 016.733 1 Oil seal, front 22 026.092 1 Bearing, front 23 026.169 1 Circlip, bearing 24 026.170 1 Collar between bearing circlip & Casing 25 024.789 1 Bearing, mainshaft

ILL N° PART N° QTY DESCRIPTION

26 024.790 1 Circlip for bearing 27 162.022 7 Screw, O/D adaptor plate to casing 28 164.002 7 Washer, spring 29 162.577 7 Screw, rear casing 30 041.632 1 Bearing, rear 31 016.735 1 Oil seal, rear 32 016.050 1 Oil seal 33 016.801 1 ‘O’ ring 34 026.101 1 Gauze filter 35 026.184 1 First motion shaft, standard ratio 026.183 1 First motion shaft, close ratio 026.185 1 First motion shaft, KC & KCN g/box 36 026.107 1 Roller bearing, first motion shaft 37 026.113 1 Oil thrower 38 026.182 1 Nut, first motion shaft 39 026.114 1 Tab washer for nut 40 026.182 1 Nut, 3rd gear and 3rd-4th synchro hub 41 026.114 1 Tab washer 42 026.102 4 Synchro ring 43 026.181 2 Operating sleeve, last type, KC & KCN 44 026.180 2 Synchro hub, last type, KC & KCN 45 026.104 6 Thrust member 46 026.105 6 Plunger 47 026.241 6 Spring 48 024.833 6 Ball 49 026.103 6 Spring 50 026.179 1 Third gear, standard 026.178 1 Third gear, close ratio 026.117 1 Third gear, KC & KCN g/box

ILL N° PART N° QTY DESCRIPTION

51 026.106 120 Needle roller, 1st, 2nd & 3rd gear 52 026.177 1 Second gear, early gearboxes 026.115 1 Second gear, KC & KCN g/box 53 026.176 1 Sleeve, bearing 54 026.174 1 First gear 026.175 1 First gear, KC & KCN g/box 55 026.173 1 Reverse gear 56 026.187 1 Lay gear, standard ratio 026.186 1 Lay gear, close ratio 026.188 1 Lay gear, KC & KCN g/box 57 026.108 1 Lay shaft 58 172.880 1 Key, locking lay shaft in g/box case 59 024.751 58 Needle roller 60 026.110 1 Thrust washer, rear 61 024.755 1 Inner thrust washer 62 024.759 1 Outer thrust washer, 0.152” 024.756 1 Outer thrust washer, 0.156” 024.757 1 Outer thrust washer, 0.159” 024.758 1 Outer thrust washer, 0.162” 024.760 1 Outer thrust washer, 0.164” 63 162.072 1 Screw 64 168.234 1 Washer, fibre 65 026.240 1 Nut, securing main shaft in bearing, O/D gearbox only 66 174.166 1 Tab washer 67 161.662 1 Nut, flange to shaft 68 300.111 2 1L gearbox oil 30 300.511 1 5L gearbox oil 30 69 024.539 1 Gear change lever

© V a n G e s t e l B & C 2 0 0 538

Overdrive for all synchro gearbox, Sept. 1965 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

Overdrive repair service: We remanufacture your own unit, normally within two weeks. It is possible to have your overdrive repaired to the original specification or to uprated competition spec. All overdrives are rig tested and come with a six month warranty. Overdrive parts listed below are the most common but other parts are available on request as well

1 020.255 1 Rebuild overdrive 28/61740 020.256 1 Rebuild overdrive, 240 models 020.257 1 Rebuild overdrive 28/61743 Daimler 2 016.843 1 Gasket and seal kit 3 081.047 1 Solenoid assembly 4 025.453 1 Set of 6 clutch return 5 025.159 1 Sliding member 6 025.388 1 Bearing 7 025.214 1 Circlip 1.7/8” 8 025.455 1 Corrugated washer 9 172.231 1 Snap ring 10 025.454 1 Plate, retaining thrust ring 11 025.457 1 Sun gear 12 025.458 1 Planetary carrier assembly 13 025.068 1 Annulus oil thrower

ILL N° PART N° QTY DESCRIPTION APPLICATION

14 025.395 1 Complete UDC assembly 15 025.069 1 Bronze thrust washer 16 025.124 1 Bearing annulus 17 025.125 1 Bearing rear 18 025.126 1 Oil seal 19 161.303 1 Nut 20 163.348 1 Washer 21 025.160 1 ‘O’ring 22 025.451 1 Bush, pinion 23 025.105 2 ‘O’ring, operating piston 24 161.019 4 Nut 25 174.016 4 Tab washer 26 025.468 1 Washer 27 025.463 1 Plunger, oil pump 28 025.042 1 Spring 29 166.134 1 Screw, securing oil pump body 30 025.406 1 Accumulator piston spring 31 168.289 1 Washer 32 023.027 1 Ball 33 025.011 1 Plunger 34 025.182 1 Spring

39© V a n G e s t e l B & C 2 0 0 5

Automatic gearbox and propshafts

ILL N° PART N° QTY DESCRIPTION

1 016.738 1 Oil seal, front, DG type 016.221 1 Oil seal, front, 35 type 2 016.892 1 Oil seal, rear, DG type 023.012 1 Oil seal, rear, 35 type 3 088.277 1 Inhibitor switch for DG type 088.278 1 Inhibitor switch for 35 Type 4 025.471 1 Control cable 5 108.591 1 Kick-down cable 6 032.193 2 Universal joint, ‘A’=75mm 7 165.429 4 ‘D’ head bolt 8 161.278 4 Castel nut 9 032.392 1 Flange 10 032.193 2 Universal joint, ‘A’=75mm 11 033.100 1 Steel ring

ILL N° PART N° QTY DESCRIPTION

12 033.098 1 Gaiter 13 033.099 2 Rubber ring 14 162.463 8 Bolt 15 161.025 8 Nut, nyloc 16 032.193 3 Universal joint, ‘A’=75mm 17 041.066 1 Grease nipple 18 032.966 1 Bearing, propshaft support 19 033.124 2 Dust shield 20 172.886 2 Key 21 162.463 8 Bolt 22 161.025 8 Nut, nyloc 23 162.463 4 Bolt, flange to flange 24 161.025 4 Nut, nyloc 25 300.137 8 Automatic oil type F

© V a n G e s t e l B & C 2 0 0 540

Rear axle

ILL N° PART N° QTY DESCRIPTION

1 033.103 1 Crown wheel and pinion, 3.3:1 033.104 1 Crown wheel and pinion, 3.45:1 033.125 1 Crown wheel and pinion, 4.09:1 033.126 1 Crown wheel and pinion, 4.55:1 2 032.826 1 Bearing, pinion inner 3 032.827 A/R Shim, inner, 0.003” 032.828 A/R Shim, inner, 0.005” 032.829 A/R Shim, inner, 0.010” 4 032.878 1 Distance piece 5 032.831 A/R Shim, inner, 0.003” 032.832 A/R Shim, inner, 0.005” 032.833 A/R Shim, inner, 0.010” 032.834 A/R Shim, inner, 0.030” 6 032.835 1 Bearing, pinion outer 7 032.871 1 Oil thrower, 4HA type 8 032.838 1 Gasket, oil seal 9 032.837 1 Oil seal, for use with original flange 033.107 1 Oil seal, for aftermarket flange 10 033.106 1 Flange, aftermarket type 11 163.348 1 Washer 12 161.705 1 Nut 13 030.195 1 Complete planet assembly, not suitable for 3.77:1 crown wheel and pinion 14 032.842 2 Differential wheel 15 032.843 2 Thrust washer 16 032.845 2 Thrust washer for pinion gear 17 032.846 1 Shaft, pinion gear 18 030.196 1 Complete planet assembly, LIMITED slip, suitable for all crown wheel and pinion ratios 19 033.108 2 Differential wheel 20 033.109 2 Ring for differential wheel 21 032.900 4 Pinion mate gear 22 032.901 2 Pinion mate gear shaft 23 032.895 4 Flat final drive friction plate

ILL N° PART N° QTY DESCRIPTION

24 032.896 2 Dished final drive friction plate 25 032.897 2 Final drive friction disc 26 016.658 1 Gasket 27 081.026 10 Screw, 5/16”UNC 29 164.002 10 Washer, spring 30 032.816 2 Drain or filler plug 31 165.652 10 Screw, crown wheel to case 32 174.127 5 Lock plate 33 032.818 2 Bearing, differential, for 4HA axle 033.127 2 Bearing, differential, for 3HA axle 34 032.819 A/R Shim, 0.003”, 4HA axle only 032.820 A/R Shim, 0.005”, 4HA axle only 032.821 A/R Shim, 0.010”, 4HA axle only 032.822 A/R Shim, 0.030”, 4HA axle only 35 030.197 2 Shaft 36 173.115 2 Key 37 041.887 2 Bearing and oil seal kit 041.904 2 Bearing only 38 161.147 2 Castle nut 39 033.128 2 Oil seal 40 033.129 2 Gasket 41 033.130 2 Hub, oil seal 42 162.072 8 Screw 43 161.025 8 Nut, nylock 44 167.323 10 Stud 45 161.664 10 Wheel nut, disc wheel cars 46 032.114 1 RH wire wheel hub 032.115 1 LH wire wheel hub 47 165.442 10 Bolt, brake disc to hub 48 161.044 10 Nut 49 300.116 1 1L mild EP oil, for rear axle 300.516 1 5L mild EP oil, for rear axle

41© V a n G e s t e l B & C 2 0 0 5

Rear suspension

ILL N° PART N° QTY DESCRIPTION

1 045.146 2 Rear spring, incl Ill. No.3 2 041.892 4 Rubber pad, standard, spring mounting 048.005 4 Polyurethane pad, spring mounting 3 041.377 2 Bush, standard 048.028 2 Polyurethane bush 4 166.206 2 Bolt, spring to axle case 5 161.079 2 Nut, nyloc 6 044.011 4 Clamp plate 7 162.022 8 Screw 163.001 8 Washer, plain 8 161.012 8 Nut, nylock 9 041.891 2 Pad, spring mounting 10 161.025 2 Nut, nylock 11 042.842 2 Koni rear shock absorber 045.159 2 Monroe, gas, rear shock absorber 045.315 2 Spax rear shock absorber

ILL N° PART N° QTY DESCRIPTION

13 041.889 4 Bush, radius arm, standard 048.112 4 Polyurethane bush 14 162.276 4 Bolt 15 163.009 4 Washer, plain 16 161.079 4 Nut, nylock 17 134.875 1 Complete panhard rod assembly 18 041.890 4 Bush, rubber, standard 048.172 4 Polyurethane bush 19 041.717 2 Distance tube 20 041.719 4 Washer, outer 21 041.720 4 Washer, inner 22 161.017 2 Nut, nylock 23 186.034 1 Copper grease, high temperature

© V a n G e s t e l B & C 2 0 0 542

Front suspension

ILL N° PART N° QTY DESCRIPTION

1 041.121 1 Split pin kit 2 041.895 4 Bush, standard, upper wishbone 041.909 4 Polyurethane bush, upper wishbone 3 041.706 4 Washer, distance 4 041.710 4 Washer, special, under nut 5 161.670 4 Nut, castle 6 044.004 A/R Shim, camber angle, 0.064” 044.003 A/R Shim, camber angle, 0.048” 7 045.158 2 Upper ball joint assembly 041.194 2 Gaiter rubber 8 161.818 2 Nut, nylock 1/2”UNF 041.736 2 Washer, plain 9 041.737 A/R Shim, caster angle, 0.064” 041.738 A/R Shim, caster angle, 0.036” 10 166.135 2 Bolt, short 166.136 2 Bolt, long 11 164.006 4 Washer, spring 12 161.337 4 Nut, nylock 13 044.005 2 Upper bump stop rubber, to ‘A’ 14 162.056 4 Screw 15 164.006 4 Washer, spring 16 041.897 2 Lower bump stop rubber 17 162.005 4 Screw 18 161.330 4 Nut, nylock 19 041.782 4 Bush, standard, lower wishbone 041.905 4 Polyurethane bush, lower wishbone 20 041.711 4 Washer 21 161.297 4 Nut, castle 22 045.008 2 Lower ball joint kit, original type 045.009 2 Lower ball joint kit, aftermarket 23 166.124 8 Screw, ball joint to carrier, for 045.008 24 048.006 2 Cap, lower ball joint 25 041.066 2 Grease nipple 26 174.136 4 Tab washer 27 041.194 2 Gaiter rubber 28 161.815 2 Nut, nylock 041.736 2 Washer, plain 29 045.136 2 Stub axle 30 161.150 2 Nut, castle 31 041.886 2 Bearing kit 32 041.818 2 Oil seal 33 048.010 2 Shield, water, later models 34 042.184 1 RH front hub 042.185 1 LH front hub

ILL N° PART N° QTY DESCRIPTION

35 041.066 2 Grease nipple 36 048.015 2 Water thrower 37 186.034 1 Copper grease, special for wire wheel hubs & spinners 38 041.786 2 Mounting, front 39 162.525 4 Screw 40 161.025 4 Nut, nylock 41 164.006 4 Washer, spring 42 041.785 2 Mounting, rear 43 164.006 4 Washer, spring 44 161.025 4 Nut, nylock 45 162.676 2 Bolt, mounting to body 46 161.025 2 Nut, nylock 47 045.144 2 Front spring, 3.4 & 3.8 045.145 2 Front spring, 2.4 48 165.476 10 Screw, long, spring seat 162.105 2 Screw, short 49 164.006 12 Washer, spring 50 044.008 A/R Packing ring, ¼” thick 044.009 A/R Packing ring, 1/8” thick 51 042.341 2 Koni front shock absorber 045.160 2 Monroe, gas, front shock absorber 045.314 2 Spax front shock absorber 52 165.432 2 Bolt 53 163.009 2 Washer, plain 54 161.079 2 Nut, nylock 55 162.020 8 Screw, bracket to seat pan 56 174.167 2 Tab washer 57 041.896 2 Mounting bush, standard, anti-roll bar 041.913 2 Polyurethane bush, 5/8” anti-roll bar 041.914 2 Polyurethane bush, 11/16” anti-roll bar 58 139.478 2 Plate, mounting 59 041.756 2 Saddle bracket 60 162.961 4 Screw 61 164.006 4 Washer, spring 62 162.667 2 Bolt 63 045.039 2 Bush 64 161.079 2 Nut, nylock 65 041.835 4 Bush, rubber 66 044.010 2 Spacer 67 041.836 4 Retaining washer 68 161.025 2 Nut, nylock 69 200.604 1 Grease pump 70 186.021 1 Grease cartridge, Castrol

43© V a n G e s t e l B & C 2 0 0 5

Steering

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 043.819 1 Pair tie rods 2 041.739 4 Grease nipple 3 043.029 4 Boot rubber 041.817 4 Clip, securing boot rubber 4 161.017 4 Nut, nylock 163.379 4 Washer, plain 5 041.900 2 Pin and bush assembly 6 161.017 2 Nut, nylock 7 163.379 2 Washer, plain 8 043.900 1 RH centre rod end assembly, with fixed Ill. No. 5 Non power steering 043.902 1 RH centre rod end assembly, with fixed Ill. No. 5 Power steering 9 043.901 1 LH centre rod end assembly, with fixed Ill. No. 5 Non power steering 043.903 1 LH centre rod end assembly, with fixed Ill. No. 5 Power steering 10 043.596 2 Clamp, securing tube to rod ends 162.128 2 Bolt 163.001 2 Washer, plain 164.002 2 Washer, spring 161.002 2 Nut 11 043.904 1 RHD steering box Non power steering 043. 1 LHD steering box, ask your local salesman 12 043.905 1 Seal kit, Burman steering box Power steering 043.906 1 Seal kit, external, Adwest steering box Power steering 043.907 1 Seal kit, internal, Adwest steering box Power steering 043.920 1 Seal kit for oil pump, fitted on engine Power steering 13 043.908 1 Top cover, Adwest steering box 14 043.909 1 Bleed screw, Adwest steering box 15 043.910 1 Selector shaft and worm assembly, Adwest steering box 16 161.815 1 Nut, drop arm, Adwest steering box 17 174.168 1 Tab washer, Adwest steering box 18 166.139 1 Screw, sealing valve adjusting hole, Adwest steering box 19 043.911 1 Piston and rack, Adwest steering box 20 043.912 1 End plate, Adwest steering box 21 043.913 1 Clip, securing end plate 22 043.914 1 Adjusting plug, Adwest steering box 23 043.915 1 Thrust pad, Adwest steering box 24 043.916 1 Bearing, top, Adwest steering box 25 043.917 A/R Shim 0.010”, Adwest steering box 26 043.918 1 Bearing, bottom 27 043.919 A/R Shim 0.010”, Adwest steering box 28 166.140 3 Screw, short, Adwest steering box 29 166.141 1 Screw, long, Adwest steering box 30 164.021 4 Washer, spring

ILL N° PART N° QTY DESCRIPTION APPLICATION

31 300.112 1 Steering box oil, non power steering 300.137 3 Steering box oil, power steering 32 043.922 1 Idler spindle, later type 33 161.045 1 Nut 34 043.923 1 Bearing, top 35 043.924 1 Bearing, bottom 36 043.925 1 Seal, felt 37 043.926 1 Retainer for seal 38 043.927 1 Washer 39 043.928 1 Abutment ring 40 161.079 1 Nut, nylock 41 043.929 1 Flexible coupling 42 043.895 1 Rubber steady bush 43 043.026 2/1 Universal joint, early models use 2 44 162.081 2 Bolt 5/16”UNF x 1 ¾” 162.128 2 Bolt 5/16”UNF x 1 3/8” 45 164.002 2 Washer, spring 46 161.002 2 Nut, for 161.081 161.021 2 Nut, nylock, for 162.128 47 043.932 1 Gaiter 48 043.931 2 Nylon roller 49 043.933 1 Bush, upper, felt, early column 50 043.934 1 Bush, lower, felt, early column 51 043.935 2 Spring clip, securing bush 52 043.936 1 Elastollan bush, upper, late column 53 043.937 1 Elastollan bush, lower, late column 54 043.892 1 Large lock nut for telescopic adjustment 55 043.938 1 Split collet 56 043.939 1 Circlip 57 161.666 1 Nut, steering wheel 58 163.381 1 Special washer 59 043.940 1 Thrust bearing, retaining inner column, 0.312”/0.314” 043.941 1 Thrust bearing, retaining inner column, 0.314”/0.316” 60 043.943 1 Retaining ring for thrust bearing 61 043.944 1 Spring clip, securing retaining ring 62 142.256 1 Horn ring, not for very early models 63 139.595 1 Horn ring cover 64 171.153 2 Spring, horn ring cover 139.596 1 Contact plate in horn push 65 043.680 2 Contact holder, for horn slip ring 088.260 2 Rubber sleeve, for horn slip ring 66 049.065 1 Medallion

© V a n G e s t e l B & C 2 0 0 544

Wheels and spinners

ILL N° PART N° QTY DESCRIPTION

1 046.029 5 Wire wheel, chrome plated, 5 x 15” curly hub type, 72 spokes 046.031 5 Wire wheel, chrome plated, 5 x 15” easy clean hub type, 72 spokes 046.028 5 Wire wheel, painted silver, 5 x 15” curly hub type, 72 spokes 046.030 5 Wire wheel, painted silver, 5 x 15” easy clean hub type 2 042.184 1 RH front hub 042.185 1 LH front hub 032.114 1 RH rear hub 032.115 1 LH rear hub 3 042.211 2 RH spinner, 2 eared, ‘Jaguar’ 042.212 2 LH spinner, 2 eared, ‘Jaguar’ 042.213 2 RH spinner, 2 eared, ‘Daimler’ 042.214 2 LH spinner, 2 eared, ‘Daimler’ 4 185.704 1 52mm Spinner remover 5 042.221 2 RH federal, ‘Jaguar’ 042.218 2 LH federal, ‘Jaguar’ 042.219 2 RH federal, ‘Daimler’ 042.220 2 LH federal, ‘Daimler’ 6 042.221 1 Remover tool for federal spinners 7 042.097 1 Hammer, copper/rawhide 1.15 kgr 8 200.674 1 Spoke spanner 9 186.034 1 High temp. copper grease 10 187.012 1 Silicone spray, use on clean & dry wheels 11 185.050 1 Cleaning brush 12 169.043 A/R Short spoke & nipple for 046.029 169.044 A/R Long spoke & nipple for 046.029 169.047 A/R Short spoke & nipple for 046.031 169.048 A/R Long spoke & nipple for 046.031 169.041 A/R Short spoke & nipple for 046.028 169.042 A/R Long spoke & nipple for 046.028 169.045 A/R Short spoke & nipple for 046.030 169.046 A/R Long spoke & nipple for 046.030 13 169.002 A/R Nipple, chrome plated 169.001 A/R Nipple, bare metal 14 141.927 4 Hub cap, ‘Jaguar’, 2.4/3.4 & 3.8 models 15 141.928 4 Badge, ‘Jaguar’

ILL N° PART N° QTY DESCRIPTION

16 140.523 4 Rim, wheel, chrome 17 142.222 4 Hub cap, ‘Jaguar’, 240 & 340 models 18 085.444 4 Badge, ‘Jaguar’ 19 172.021 8 Clip, badge, 240 & 340 models 20 133.140 1 Hub cap remover 21 161.664 20 Wheel nut 22 047.071 5 Protection rim 23 047.005 5 15”tyre tube 24 161.476 5 Stainless steel vale cap 25 132.526 1 Tyre pump 26 047. 5 Please call for more information 27 200.889 1 Jack 28 159.485 1 Leather strap to secure jack 29 200.604 1 Grease pump 30 186.021 1 Greasse cartridge, Castrol 31 200. 1 Tool box, WITHOUT tools, ask for more details 32 200.884 1 Open end spanner, ¾ x 7/8” 33 200.876 1 Open end spanner, 9/16 x 5/8” 34 200.885 1 Open end spanner, ½ x 7/16” 35 200.877 1 Open end spanner, 11/32 x 3/8” 36 200.840 1 Adjustable spanner 37 200.702 1 Tyre pressure gauge 200.874 1 Tyre pressure gauge 38 200.842 1 Feeler gauge 39 200.836 1 Ratchet lever, for jack 40 200.675 1 Grease gun 41 200.883 1 Box spanner, spark plug/cylinder head nuts 42 200.834 1 Screw driver 43 200.623 1 Tommy bar, for box spanner 44 200.849 1 Pliers 45 200.841 1 Screw driver, for adjustment of distributor points 46 200.630 1 Extractor, for tyre valve 47 200.838 1 Cam setting tool 48 200.878 1 Tin with bleeder tube, Dunlop, up to 1967 200.879 1 Tin with bleeder tube, Girling, 1967 on

45© V a n G e s t e l B & C 2 0 0 5

Master brake cylinder, brake pipes and servo

ILL N° PART N° QTY DESCRIPTION

1 053.241 1 Brake master cylinder, aftermarket 2 167.382 2 Stud 3 161.001 2 Nut 4 164.031 2 Washer shakeproof 5 052.837 1 Repair kit for aftermaket master cylinder 052.269 1 Repair kit for original brake master cylinder 6 053.039 1 1L brake fluid DOT 4 053.018 1 1L brake fluid SILICONE 7 027.425 1 Pedal rubber, JAGUAR 8 027.490 2 Pedal rubber, DAIMLER 9 027.479 2 Pedal bush 10 171.161 1 Pedal spring 11 172.367 1 Clevis pin 12 053.511 1 Brake fluid reservoir 13 053.539 1 Cap 14 054.805 1 Hose 15 173.116 1 Clip, fluid reservoir 16 050.302 1 Rebuild servo 5”, Girling 053.082 1 Replacement servo, Lockheed 052.765 1 Repair kit, fluid side only, Girling servo 053.084 1 Repair kit, complete, Lockheed servo 17 054.843 1 Hose, from servo to breather 18 173.108 2 Clip

ILL N° PART N° QTY DESCRIPTION

19 050.520 1 Reservac tank 20 139.629 1 Stone guard 21 052.771 1 Check valve 22 054.844 1 Hose, check valve to servo 054.845 1 Hose, check valve to inlet manifold 23 173.107 6 Clip 24 054.731 2 Front brake hose 054.732 1 Rear brake hose 25 054.793 2 Front brake hose, braided stainless steel 054.794 1 Rear brake hose, braided stainless steel 26 161.013 3 Nut, locking 27 164.034 3 Washer shakeproof 28 052.776 1 5 Way piece. 29 052.780 1 3 Way piece, fits on rear axle 30 168.014 1 Washer, copper, fits between rear brake hose and 3 way piece 31 084.004 1 Brake light switch 32 054.862 1 Brake pipe set, MK2, up to 1966 054.863 1 Brake pipe set, MK2 & 240, 1966 on 054.864 1 Brake pipe set, MK2 3.4 & 3.8, up to 1966 054.865 1 Brake pipe set, MK2 3.4 & 3.8, 1966 on 33 052.117 1 Rubber grease 34 122.390 2 Grommet, brake pipe

© V a n G e s t e l B & C 2 0 0 546

Brake parts, front and rear

ILL N° PART N° QTY DESCRIPTION

1 050.362 2 Front disc 050.365 2 Rear disc 2 165.442 20 Bolt, disc to hub, use 5 for each disc 3 161.044 20 Nut 4 053.093 4 Front piston & cylinder, 2 1/8”, 53.91mm 052.270 1 Seal kit for two front callipers 5 053.095 1 Brake pad set, 4 pieces, standard quality 053.495 1 Brake pad set, 4 pieces, Green stuff 6 052.576 1 Bolts & washer set, 16 bolts & 16 washers 7 041.722 2 Bleed screw & ball 8 052.669 4 Support plate, brake pads 9 052.670 2 Retaining plate, brake pads 10 162.515 2 Screw 11 164.007 2 Washer, shakeproof 12 161.019 2 Nut 13 165.446 2 Bolt, calliper to stub carrier 165.445 2 Bolt, calliper/steering arm to stub carrier 14 052.654 A/R Shim .020” 15 053.094 4 Rear piston & cylinder, 1 ½”, 38.1mm 052.271 1 Seal kit for two rear callipers 16 053.095 1 Brake pad set, 4 pieces, standard quality 053.495 1 Brake pad set, 4 pieces, Green stuff 17 052.576 1 Bolt & washer set, 16 bolts & 16 washers 18 041.722 2 Bleed screw & ball 19 052.669 4 Support plate, brake pads 20 052.670 2 Retaining plate, brake pads 21 162.515 2 Screw 22 164.007 2 Washer, shakeproof 23 161.019 2 Nut 24 165.448 4 Bolt, calliper to adaptor plate 25 052.654 A/R Shim .020” 26 052.720 2 Retraction plate, for early non automatic adjustable handbrake 052.937 2 Retraction plate, for automatic adjustable handbrake

ILL N° PART N° QTY DESCRIPTION

27 052.721 2 Lock plate, for 052.720 052.938 2 Lock plate, for 052.937 28 165.440 4 Bolt, handbrake mechanism to calliper 29 053.510 1 Handbrake pads, set of 4 30 050.518 1 R/H handbrake assembly, automatic adjustable type 050.519 1 L/H handbrake assembly, automatic adjustable type 31 166.130 1 Two bolts & washer kit 32 052.912 2 Outside protection cover 33 052.911 2 Inside protection cover 34 052.906 2 Tension spring, pawl 35 052.902 2 Pawl 36 052.908 2 Ratchet 37 052.909 2 Friction spring 38 052.903 2 Return spring 39 052.910 2 Hinge pin 40 052.902 2 Lever, operation 41 052.907 2 Anchor pin 42 052.904 2 Anchor pin for return spring 43 165.451 2 Bolt, handbrake adjusting 44 054.846 1 Handbrake cable 45 054.847 2 Guide, nylon 46 166.143 2 Screw 47 163.007 2 Washer, plain 48 161.047 2 Nut, nylock 49 054.848 1 Fork end 161.019 1 Nut, locking 50 054.849 1 RH handbrake (axle) cable, automatic adjustment type 51 054.850 1 LH handbrake (axle) cable, automatic adjustment type 52 172.045 5 Clevis pin 163.001 5 Washer, plain 53 086.917 1 Handbrake warning light switch 54 122.540 1 Blanking plug 55 054.605 4 Bridge pipe

47© V a n G e s t e l B & C 2 0 0 5

Wiring loom, battery and electrical connectors

ILL N° PART N° QTY DESCRIPTION

1 080.523 1 Wiring loom, 2.4, 3.4 & 3.8, manual gearbox cars 080.524 1 Wiring loom, 2.4, 3.4 & 3.8, automatic gearbox cars 080.538 1 Wiring loom, 240 & 340, manual gearbox cars 2 080.541 1 Cable, battery to starter 080.542 1 Cable, battery to body, + to ground 3 083.178 1 Battery terminal clamp, - pole 083.179 1 Battery terminal clamp, + pole 4 080.009 1 Earth cable 5 083.174 1 Battery switch 086.782 1 Battery switch, F.I.A. approved 6 080.299 A/R 1 Meter black battery cable 080.133 1 5 Meter black battery cable 7 080.134 1 1 Meter earth cable 8 083.653 A/R Heat shrink tubing, 9.5mm ID x 32 mm long 9 083.652 A/R Straight terminal 10 083.651 A/R Flag terminal 11 082.022 1 Battery 12 082.196 1 Cover, battery 13 139.497 1 Clamp 14 121.824 1 Rubber strap 15 165.479 2 Bolt 16 062.005 1 Tube, drain 17 121.821 1 Grommet kit, see for individually grommets our tool catalogue 18 083.041 A/R Single snap connector 19 083.042 A/R Double snap connector 20 083.043 A/R Triple snap connector 21 083.044 A/R Sleeve type bullet terminal 22 083.180 A/R Solder type bullet terminal 23 083.115 A/R Bulb holder with earth wire 084.132 A/R Bulb holder without earth wire 24 083.181 A/R Female terminal, 6.3mm blade 083.185 A/R Female terminal, 9.5mm blade 25 083.996 A/R Eyelet terminal 3/16” hole 083.997 A/R Eyelet terminal 1/4” hole 083.998 A/R Eyelet terminal 5/16” hole

ILL N° PART N° QTY DESCRIPTION

26 083.182 A/R Insulation for 083.181 or 083.187 083.186 A/R Insulation for 083.185 27 172.250 A/R Earth terminal 28 084.123 A/R Bulb, instrument, 2.2W 084.122 A/R Bulb, instrument, 2.2W bayonet 29 172.020 A/R A = 3/16” = 4.7mm, B = 1/8” = 3.9mm 172.073 A/R A = 3/16” = 4.7mm, B = 3/16” = 4.7mm 172.140 A/R A = 3/16” = 4.7mm, B = 1/4” = 6.35mm 172.019 A/R A = 3/16” = 4.7mm, B = 5/16” = 7.93mm 172.141 A/R A = 3/16” = 4.7mm, B = 3/8” = 9.52mm 172.143 A/R A = 3/16” = 4.7mm, B = 7/16” = 11.1mm 172.075 A/R A = 3/16” = 4.7mm, B = 1/2” = 12.7mm 172.148 A/R A = 3/16” = 4.7mm, B = 5/8” = 15.9mm 172.151 A/R A = 3/16” = 4.7mm, B = 3/4” = 19.0mm 172.154 A/R A = 3/16” = 4.7mm, B = 7/8” = 22.2mm 172.063 A/R A = 1/4” = 6.35mm, B = 3/16” = 4.7mm 172.041 A/R A = 1/4” = 6.35mm, B = 1/4” = 6.35mm 172.053 A/R A = 1/4” = 6.35mm, B = 5/16” = 7.93mm 172.142 A/R A = 1/4” = 6.35mm, B = 3/8” = 9.52mm 172.144 A/R A = 1/4” = 6.35mm, B = 7/16” = 11.1mm 172.146 A/R A = 1/4” = 6.35mm, B = 1/2” = 12.7mm 172.149 A/R A = 1/4” = 6.35mm, B = 5/8” = 15.9mm 172.152 A/R A = 1/4” = 6.35mm, B = 3/4” = 19.0mm 172.155 A/R A = 1/4” = 6.35mm, B = 7/8” = 22.2mm 172.042 A/R A = 5/16” = 7.9mm, B = 3/16” = 4.7mm 172.055 A/R A = 5/16” = 7.9mm, B = 1/4” = 6.35mm 172.010 A/R A = 5/16” = 7.9mm, B = 5/16” = 7.93mm 172.038 A/R A = 5/16” = 7.9mm, B = 3/8” = 9.52mm 172.145 A/R A = 5/16” = 7.9mm, B = 7/16” = 11.1mm 172.025 A/R A = 5/16” = 7.9mm, B = 1/2” = 12.7mm 172.150 A/R A = 5/16” = 7.9mm, B = 5/8” = 15.9mm 172.153 A/R A = 5/16” = 7.9mm, B = 3/4” = 19.0mm 172.156 A/R A = 5/16” = 7.9mm, B = 7/8” = 22.2mm 172.127 A/R A = 3/8” = 9.32mm, B = 3/16” = 4.7mm 172.182 A/R A = 3/8” = 9.32mm, B = 5/16” = 7.93mm

© V a n G e s t e l B & C 2 0 0 548

Starter, dynamo and electrical components

ILL N° PART N° QTY DESCRIPTION

1 082.090 1 Starter motor, 3.4 & 3.8 manual models 082.089 1 Starter motor, 2.4 manual models 082.128 1 Starter motor, all automatic models 082.089 1 Starter motor, Daimler V8 2 081.075 1 Brush set 3 081.197 1 Bush, drive end 4 081.198 1 Bush, rear end 5 161.772 2 Nut, brass 6 082.156 1 Starter motor, modern type, not for Daimler 7 082.079 1 Dynamo C45, Non power steering, early 2.4, 3.4 & 3.8 082.180 1 Dynamo C45, Power steering, early 2.4, 3.4 & 3.8 082.080 1 Dynamo C42, Non power steering, later 2.4, 3.4, 3.8 & 240, 340 models 082.182 1 Dynamo C42, Power steering, later 2.4, 3.4 & 240, 340 models 082.182 1 Dynamo, Daimler V8 082.173 1 Alternator, Daimler V8 250 8 081.586 1 Brush set, for C45 dynamo 081.182 1 Brush set, for C42 dynamo 9 181.037 1 Dynamo mounting kit 10 181.003 1 Pulley, duplex 11 181.028 1 Fan 12 061.554 1 Fan belt, single, 2.4 early models 061.514 1 Fan belt. Single, 3.4 & 3.8 early models 061.555 1 Fan belt, double, 2.4 late models & 240 models 061.513 1 Fan belt double, 3.4, 3.8 late models & 340 061.513 1 Fan belt double, Daimler V8 with dynamo 061.578 1 Fan belt, Daimler V8 with alternator 13 083.119 1 Starter solenoid 14 122.013 2 Boot, plastic 084.003 2 Boot, rubber

ILL N° PART N° QTY DESCRIPTION

15 082.140 1 Control box, 310 type, early type 16 082.094 1 Control box, RB340 type for C45 dynamo, 30amp 082.129 1 Control box, RB340 type for C42 dynamo, 25amp 17 084.006 1 Fuse box 18 084.005 1 Five piece fuse set, 35amp 083.162 1 Five piece fuse set, 50amp 19 084.047 1 Horn, low note, wind tone type 086.193 1 Horn, low note, late type 084.048 1 Horn, high note, wind tone type 086.194 1 Horn, high note, late type 20 084.011 1 Flasher box, screw type, fits behind the central dash 083.079 1 Flasher box push-on type, fits behind the central dash 21 088.031 1 Oil pressure switch 22 083.091 1 Voltage stabiliser, instruments 23 086.935 4 Door switch 24 088.148 1 Water temperature sender 25 086.996 1 Handbrake switch 26 083.120 1 Horn relays, also for fog or spot lamps 27 083.052 1 Reverse light switch 28 084.004 1 Brake light switch 29 084.010 1 Headlamp dipper switch, early 083.080 1 Headlamp dipper switch, 240, 340 models 30 122.462 1 Rubber cap, for 084.011 086.887 1 Rubber cap, for 083.080 31 086.996 1 Choke warning lamp switch, 2.4, 240 models 32 086.624 1 Rev. counter generator, fits on the engine 33 088.277 1 Inhibitor switch, for DG type automatic gearbox 088.278 1 Inhibitor switch, for 35 type automatic gearbox 34 161.722 1 Knurled nut, fuse box cover

49© V a n G e s t e l B & C 2 0 0 5

Windscreen wiper and washer system

ILL N° PART N° QTY DESCRIPTION

1 087.102 2 Wiper blade 12” 2 087.003 2 Wiper arm 3 088.195 2 Kit chrome nut, bezel & rubber washer 4 083.021 2 Nut, chrome 5 088.216 1 Bezel, chrome 6 082.183 1 Two speed wiper motor, need some small rewiring 7 083.197 1 Pair brushes 8 083.025 1 Casing and nut, cut to length 9 083.024 1 Rack 10 122.015 1 Grommet 11 083.781 1 Washer bottle, pump & bracket 12 083.989 1 Bracket

ILL N° PART N° QTY DESCRIPTION

13 083.987 1 Bottle only 14 085.165 1 Lable, ‘Lucas’ 15 083.988 1 Filler plug 16 083.055 1 Tubing kit 17 086.617 1 Pair washer jets 18 083.056 1 ‘T’ piece 19 083.054 1 Non return vale 20 086.832 1 Plastic washer bottle, pump & bracket 21 133.703 1 Bracket 22 083.613 1 Plastic reservoir 23 083.761 1 Filler plug

© V a n G e s t e l B & C 2 0 0 550

Headlamp and fittings

ILL N° PART N° QTY DESCRIPTION

1 133.050 2 Headlamp bowl, excluded adjusters 2 084.051 2 Adjuster and spring kit 3 172.160 2 Retaining clip 4 084.081 2 Rubber seal, bowl to body 5 162.507 1 Screw set, 3/16” 6 084.053 2 Inner bowl 7 084.087 2 Chrome retaining rim, light unit 8 162.109 6 Screw 9 084.082 2 Lamp unit, ‘E’ approved 10 084.054 2 Headlamp bulb 084.774 1 Pair Halogeen headlamp bulbs. NOT H4 fitting but a direct replacement for the standard bulb 084.054 11 084.103 2 Lamp unit, H4, ‘E’ approved 12 084.110 2 H4 Headlamp bulb 13 084.812 2 ‘J’ lamp unit, H4, NOT ‘E’ approved 14 084.154 2 Head lamp rim, chrome 15 162.340 2 Screw 16 163.062 2 Washer, screw retaining 17 084.177 2 Dust seal 18 084.602 1 Bulb kit with standard headlamp bulb 19 084.052 2 Wiring and headlamp socket 20 084.758 2 Sidelight unit 21 165.473 2 Chrome screw, sidelight fixing

ILL N° PART N° QTY DESCRIPTION

22 084.069 2 Bulb 23 084.760 2 Indicator lens 24 084.761 2 Clip, lens fixing 25 084.816 2 Flasher lamp ass, amber 084.751 2 Flasher lamp ass. Clear 26 084.817 2 Amber lens and rim 084.818 2 Clear lens and rim 27 084.062 2 Bulb 28 084.872 2 Body rubber 29 084.802 2 Fog lamp assembly 30 084.218 2 Light unit, fog 31 084.198 2 Bulb 32 084.191 2 Fog lamp, free standing 33 084.193 2 Spot lamp, free standing 34 084.198 A/R Bulb for fog lamp 084.119 A/R Bulb for spot lamp 35 084.194 A/R Light unit, fog lamp 36 084.196 A/R Light unit, spot lamp 37 141.409 2 Cone base, chrome 38 162.381 2 Bolt, lamp fixing 39 161.121 2 Nut 40 142.131 1 Pair 5” stone guards, chrome 41 185.337 A/R Lamp protector 5”

51© V a n G e s t e l B & C 2 0 0 5

Rear and interior lamps

ILL N° PART N° QTY DESCRIPTION

1 284.045 1 RH plinth 284.046 1 LH plinth 2 284.021 1 Pair seals, lamp plinth to body 3 084.298 2 Contact and spring, single 4 084.316 2 Contact and spring, double 5 084.843 2 Rubber seal, lens to plinth 6 084.858 2 Plate for lenses 7 084.062 2 Bulb, flasher, 21W 8 084.063 2 Bulb, stop and tail, 21/5W 9 084.839 2 Amber lens, flasher 084.840 2 Red lens, flasher, USA models 10 084.841 2 Lens, stop & tail, red 11 084.842 2 Chrome clip between lenses 12 084.874 2 Divider shield, between lenses 13 165.468 2 Screw, chrome plated 14 084.873 2 Reflector 15 084.602 1 Bulb kit with standard headlamp bulb 16 084.755 1 Shroud and bulb holder assembly 084.333 2 Contact set, small 084.298 1 Contact set, large 17 084.069 2 Bulb, number plate lighting 18 084.062 1 Bulb, reverse light 19 121.743 1 Seal, lamp to boot lid 20 084.755 1 Shroud and bulb holder assembly 21 084.864 1 Seal for lens

ILL N° PART N° QTY DESCRIPTION

22 084.863 1 Reverse light lens 23 142.237 1 Chrome plinth, Jaguar 142.398 1 Chrome plinth, Daimler 24 084.096 2 Interior lamp, fits on top of the ‘B’ post 25 084.124 1 Bulb 26 084.097 1 Lens & cover only 27 284.047 2 Interior lamp fits on the ‘C’ post 284.048 2 Bulb 28 284.044 1 Map lamp 29 084.069 1 Bulb 30 084.261 1 Rear fog lamp, can easily be fitted on top or bottom side, chrome back shell, ‘E’ approved 31 135.755 1 Two hole mounting plate, for switches & warning lights, made from stainless steel 32 135.756 1 Three hole mounting plate for switches & warning lights, made from stainless 33 083.088 A/R On-off switch, use relay from 50 Watts onward 34 083.084 A/R Light switch, three positions, off, side lights & head light 35 083.159 A/R Warning light green 083.477 A/R Warning light, red 086.187 A/R Warning light, amber 086.370 A/R Warning light, blue 36 084.126 A/R Spare bulb, for Ill. No 35 37 083.120 A/R Relay, metal boxed

© V a n G e s t e l B & C 2 0 0 552

Switches, cables, warning lights, relays & choke control

ILL N° PART N° QTY DESCRIPTION

1 121.821 1 Grommet kit 2 088.200 1 Switch, windscreen washer 3 086.751 1 Switch, windscreen wiper 4 086.748 1 Switch, map light 5 086.408 1 Switch, starter 6 086.912 1 Cigar lighter assembly 7 086.746 1 Switch, lighting O.S.H.F 8 161.819 1 Nut 9 086.745 1 Escutcheon O.S.H.F 086.744 1 Escutcheon O.S.H 10 088.150 1 Fixing bolt, lighting switch 11 086.747 1 Lever, lighting switch 12 083.036 1 Switch, ignition 13 083.035 1 Barrel and key 14 086.749 1 Switch, fan 15 086.748 1 Switch, panel light 16 086.748 1 Switch, interior light 17 088.388 A/R Lever knob 086.899 1 Lever knob set 063.487 1 Choke knob 063.488 1 Choke escutcheon 18 161.354 A/R Bezel, switches, 9/16”, see also tool catalogue 190.058 19 200.665 1 Bezel nut remover 20 088.147 A/R Lucar blade, for oil pressure gauge 21 086.890 1 Lens, choke, 2.4 only 22 084.123 1 Bulb 23 088.161 1 Warning lamp, hand brake/fluid level 084.123 1 Bulb 24 085.460 1 Escutcheon 25 139.594 1 Bracket 26 166.083 2 Thumb screw, centre dash panel 27 168.265 2 Washer, black 28 086.624 1 Rev counter generator

ILL N° PART N° QTY DESCRIPTION

29 088.031 1 Oil pressure switch 30 083.091 1 Voltage stabiliser, water temp/fuel gauge 31 086.996 1 Choke warning light switch 32 086.996 1 Hand brake warning light switch 33 088.148 1 Transmitter, water temperature gauge 34 086.935 4 Door switch 35 083.120 A/R Relay, horn 36 083.459 1 Speedo cable, 243cm, LH drive, Moss gearbox 086.053 1 Speedo cable, 198cm, RH drive, Moss gearbox 088.207 1 Speedo cable, 270cm, LH drive, All synchro g/box 088.185 1 Speedo cable, 173cm, RH drive, All synchro g/box 086.207 1 Speedo cable, 270cm, LH drive, Daimler with All synchro g/box 088.053 1 Speedo cable, 198cm, RH drive, Daimler with All synchro g/box 088.194 1 Speedo cable, 153cm, LH drive, AUTOMATIC models with Borg Warner DG 088.152 1 Speedo cable, 198cm, RH drive, AUTOMATIC models with Borg Warner DG 088.206 1 Speedo cable, 213cm, LH drive, AUTOMATIC models with Borg Warner 35 ALSO DAIMLER 134.043 1 Speedo cable, 178cm, RH drive, AUTOMATIC models with Borg Warner 35 ALSO DAIMLER 37 122.016 1 Grommet, speedo cable, also in Ill. No. 1 38 088.100 1 Direction indicator switch 166.157 2 Screw 39 088.155 1 Indicator strip, LH drive 088.156 1 Indicator strip, RH drive 40 088.224 1 Lens for indicator strip 41 142.406 1 Chrome strip 42 284.020 3 Bulb, indicator strip 43 084.123 A/R Bulb, instruments 44 086.093 1 6 Piece seal kit

53© V a n G e s t e l B & C 2 0 0 5

External body parts

ILL N° PART N° QTY DESCRIPTION

1 138.646 1 RH front wing 138.647 1 LH front wing 2 139.488 1 Closing plate, joining front wing to grille 3 234.197 2 Wing capping piece 4 232.449 1 LH splash plate 5 232.448 1 RH splash plate 6 139.485 2 Side light housing 7 232.442 1 RH lower skirt 232.443 1 LH lower skirt 8 139.482 1 RH front wing indicator repair piece 139.483 1 LH front wing indicator repair piece 9 232.440 1 RH nose repair section 232.441 1 LH nose repair section 10 232.446 1 RH repair section, rear half 232.447 1 LH repair section, rear half 11 232.444 1 RH wheel arch repair piece 232.445 1 LH wheel arch repair piece 12 138.135 1 RH outer sill 138.136 1 LH outer sill

ILL N° PART N° QTY DESCRIPTION

13 138.131 1 RH front door skin, up to ‘A’ 138.132 1 LH front door skin, up to ‘A’ 14 138.133 1 RH rear door skin, up to ‘B’ 138.134 1 LH rear door skin, up to ‘B’ 15 136.465 1 RH ‘D’post repair panel 136.466 1 LH ‘D’post repair panel 16 138.139 1 RH rear wheel spats 232.785 1 RH rear wheel spats, narrow, for 5.5” & 6” competition wire wheels 138.140 1 LH rear wheel spats 232.786 1 LH rear wheel spats, narrow, for 5.5” & 6” competition wire wheels 17 152.291 4 Dzus fastener, 2 required per wheel spat 18 138.141 1 RH rear wing repair section 138.142 1 LH rear wing repair section 19 138.143 1 Rear valance, narrow, 3.4 & 3.8 138.144 1 Rear valance, narrow, 2.4 138.658 1 Rear valance, wide, 240 & 340 20 139.491 1 Radiator access panel

© V a n G e s t e l B & C 2 0 0 554

Internal body parts

ILL N° PART N° QTY DESCRIPTION

1 138.652 1 RH chassis leg 2 138.653 1 LH chassis leg 3 138.654 1 Front cross member 138.655 1 Front cross member valance, 240 & 340 models 4 232.452 1 Closing plate, cross member 5 139.492 1 RH front outrigger 6 139.493 1 LH front outrigger 7 232.453 1 RH radiator cowl 8 232.454 1 LH radiator cowl 9 136.477 1 RH front wing stay bracket 10 136.478 1 LH front wing stay bracket 11 139.486 1 RH gusset reinforcing stay bracket 12 139.487 1 LH gusset reinforcing stay bracket 13 139.439 1 RH radiator lower mounting bracket 14 139.490 1 LH radiator lower mounting bracket 15 136.471 1 RH front jacking point, outrigger 16 136.472 1 LH front jacking point, outrigger 17 232.457 1 RH upper spring hanger 18 232.678 1 LH upper spring hanger 19 232.458 2 Lower spring hanger

ILL N° PART N° QTY DESCRIPTION

20 139.494 1 Panhard rod bracket assembly, for RH spring hanger 21 139.495 1 Upper spring clamp assembly, for LH spring hanger 22 136.473 1 RH rear jacking point 23 136.474 1 LH rear jacking point 24 138.137 1 RH inner sill 138.138 1 LH inner sill 25 138.135 1 RH outer sill 138.136 1 LH outer sill 26 232.455 1 RH floor repair panel, above front jacking point 27 232.456 1 LH floor repair panel, above front jacking point 28 163.248 11 Washer, oval, securing gear box cover 29 see external body panel page 30 136.475 1 RH tonneau side panel assembly 31 136.476 1 LH tonneau side panel assembly 32 137.576 1 Stricker plate, boot lock 33 186.151 1 “Fertan’rust killer, pumpspray 340ml 34 186.087 1 Waxoyl 2.5L starter kit 186.084 1 Waxoyl 2.5L refill can 35 186.080 1 Waxoyl spray, 400ml

55© V a n G e s t e l B & C 2 0 0 5

Doors, door seals, windscreen front and rear

lLL No PART No QTY DESCRIPTION

1 138.131 1 RH front door skin, up to ‘A’ 138.132 1 LH front door skin, up to ‘A’ 2 138.133 1 RH rear door skin, up to ‘B’ 138.134 1 LH rear door skin, up to ‘B’ 3 165.462 8 Screw, see ‘D’,hinge to A post, use 2 per hinge 4 165.463 12 Screw, see ’E’, hinge to door, use 3 per hinge 5 165.464 4 Screw, see ’F’, hinge to A post, use 1 per hinge 6 165.462 12 Screw, see ’D’, hinge to C post, use 3 per hinge 7 162.726 16 Screw, see ’C’, door to hinge, use 4 per hinge 8 165.463 6 Screw, see ’E’, hinge to door, use 3 per door 9 142.261 1 RH front door handle, without barrel 142.260 1 LH front door handle, without barrel 10 142.389 1 RH rear door handle 142.390 1 LH rear door handle 11 141.878 1 Lock set, for two doors, boot lock, ignition and glove box lock 141.879 1 Lock set, for two doors 12 172.879 4 Clevis pin, for door check arm 13 122.422 2 door buffer, rear door 14 141.881 4 Handle, door 15 141.882 4 Handle, window regulator 16 142.253 8 Spring and escutcheon set, use 1 per handle 17 150.029 4 Weather strip, outside, brush type, up to Apr 1963 121.634 4 Weather strip, outside, flock type, Apr 1963 on 150.029 4 Draught strip, inner, all cars, fits inside between wood and door glass 18 172.088 32 Clip, weather and draught strip, use 8 per strip Info Fit all door seals, rub in with glycerine and close all the door for 3 days 19 121.610 1 Door seal kit, 2 x front and 2 x rear door 20 121.601 1 RH front door (hinge pillar) seal 121.602 1 LH front door (hinge pillar) seal 21 121.603 1 RH front door (shut pillar) seal 121.604 1 LH front door (shut pillar) seal 22 121.605 4 Bottom seal, shorten for rear doors 23 121.606 1 RH rear door (hinge pillar) seal 121.607 1 LH rear door (hinge pillar) seal

lLL No PART No QTY DESCRIPTION

24 121.608 1 RH rear door (shut pillar) seal 121.609 1 LH rear door (shut pillar) seal 25 121. 1 RH rear door, lower piece 121. 1 LH rear door, lower piece 26 120.183 2 Glass, front quarter light 27 121.562 1 RH seal, quarter light 121.563 1 LH seal, quarter light 28 142.345 1 RH handle, quarter light 142.346 1 LH handle, quarter light 29 162.613 4 Screw, upper pivot hinge to frame, length 1/4” (check length) 166.145 4 Screw, upper pivot hinge to frame, length 1/2” (check length) 30 120.183 2 Glass, front door 31 120.184 2 Glass, rear door 32 121.061 4 Seal, glass to lower channel, before using this special seal, wet the seal with thinner. 33 120.185 2 Glass, rear quarter light 34 121.624 2 Seal, quarter light 35 142.347 1 RH rear quarter light vent catch 142.348 1 LH rear quarter light vent catch 36 165.478 4 Screw 37 165.470 10 Screw, quarter light frame to door frame, use 5 per frame 38 166.146 4 Screw, fixing vent plate to quarter light frame 39 121.913 4 Window felt, approximately 183cm 40 120.177 1 Front screen, clear 120.178 1 Front screen, green tinted 41 121.550 1 Front glazing seal 42 121.633 3.5 Filler rubber, sold per meter 43 140.555 1 RH front finisher 44 140.556 1 LH front finisher 45 137.963 2 Joint piece 46 120.180 1 Rear screen, clear 120.181 1 Rear screen, tinted 47 121.551 1 Rear glazing seal 48 140.577 1 RH rear finisher 49 140.578 1 LH rear finisher

© V a n G e s t e l B & C 2 0 0 556

Bonnet, boot lid, bumpers & small chrome parts

lLL No PART No QTY DESCRIPTION

1 141.866 1 Leaping Jaguar mascot 2 162.076 1 Screw, check! 3 142.489 1 Daimler mascot 4 234.148 1 Strip set, chrome, centre bonnet, when Jaguar mascot is fitted 234.484 1 Strip, chrome, centre bonnet, when Jaguar mascot is NOT fitted 234.485 1 Strip set, chrome, centre bonnet, when Daimler mascot is fitted 234.486 1 Strip, chrome, centre bonnet, when Daimler mascot is NOT fitted 5 165.850 11 Special screw, strip 6 161.054 11 Nut 7 122.544 2 Bonnet rest rubber, front 8 122.422 2 Bonnet rest rubber, rear 9 121.589 2 1m Bonnet rest rubber, rear 10 121.818 1 Scuttle vent seal 11 134.955 1 Bonnet pull cable 12 139.076 1 Cable adjuster assembly 13 122.571 4 Plug, jacking hole 14 122.422 4 Plug, rear door rest 15 121.819 2 Seal, rear spats 16 122.455 6 Rubber buffer, rear spat 17 122.455 2 Rubber buffer, fuel cap door 18 121.586 4 1m Seal, boot lid 19 122.459 4 Buffer, number plate 20 142.239 1 Escutcheon, boot lid lock 21 162.718 2 Screw, escutcheon

lLL No PART No QTY DESCRIPTION

22 141.878 1 Lock set, for two doors, boot lock, ignition and glove box lock 23 142.237 1 Chrome plinth, Jaguar 24 142.398 1 Chrome plinth, Daimler 25 121.682 1 Seal, plinth 26 140.574 1 Chrome beading, number plate 27 173.134 4 Staple, chrome beading 28 142.338 1 ‘JAGUAR’ badge 29 142.333 1 ‘3.4’ badge 30 142.334 1 ‘3.8’ badge 31 142.337 1 ‘AUTOMATIC’ badge 32 142.335 1 ‘240’ badge, Sept 1967 on 33 142.336 1 ‘340’ badge, Sept 1967 on 34 172.233 A/R Fix-blind, most badges use 2 35 142.490 1 ‘Daimler’ boot badge 36 142.491 1 ‘250’ badge, Jul 1967 on 37 142.492 1 ‘V8’ badge 38 140.644 1 Front bumper, up to Sept 1967 39 140.646 2 Overrider, front 40 140.645 1 Rear bumper 41 140.647 1 RH rear overrider 42 140.648 1 LH rear overrider 43 121.635 2 1m seal, between overrider and bumper 44 165.472 4 Bolt, overrider, also in 46 45 165.461 2 Bumper bolt, chrome, also in 46 46 139.925 1 Front bumper bolting kit, up to 1967 47 121.521 1 Seal between bumper & boddy

lLL No PART No QTY DESCRIPTION

48 142.339 1 RH chrome end cap 49 142.340 1 LH chrome end cap 164.016 2 Washer, shakeproof 161.024 2 Nut 50 017.049 4 Bumper mounting 51 142.341 1 badge ‘DISC BRAKES’ 142.493 1 Badge “D” for Daimler 163.007 1 Washer plain 164.015 1 Washer, spring 161.024 1 Nut 52 136.990 1 Front number plate 53 139.926 1 Rear bumper bolting kit, up to 1967 54 140.649 1 Front bumper, Sept 1967 on 55 140.651 1 RH front overrider 56 140.652 1 LH front overrider 57 140.650 1 Rear bumper 58 140.653 1 RH rear overrider 59 140.654 1 LH rear overrider 60 161.026 2 Nut 61 139.927 1 Front bumper bolting kit, 1967 on 62 142.339 1 RH chrome end cap 63 142.340 1 LH chrome end cap 164.016 2 Washer, shakeproof 161.015 2 Nut 64 121.931 4 Buffer, rubber 65 232.784 1 Front number plate 66 139.928 1 Rear bumper bolting kit, 1967 on 67 142.235 1 MKII badge, up to sept 1967 68 140.418 1 Badge bar, see also page 59

57© V a n G e s t e l B & C 2 0 0 5

Grill, chrome beadings, wood set and mirrors

lLL No PART No QTY DESCRIPTION

1 140.619 1 Chrome beading set 2 139.637 1 Clip kit for chrome beading set, 78 pieces, contents: 14 T bars, 20 clips, 18 rivets, 12 studs & 14 nuts 3 142.405 2 Joint piece 4 234.179 1 Pair bonnet beadings 5 234.180 1 Pair scuttle beadings 6 234.181 1 Pair front door beadings 7 142.331 1 Pair ‘B’ post beadings 8 234.182 1 Pair rear door beadings 9 234.183 1 Pair rear wing beadings 10 234.186 1 RH front drip moulding 11 234.187 1 LH front drip moulding 12 234.188 1 RH rear drip moulding 13 234.189 1 LH rear drip moulding 14 234.184 1 Pair front door beadings 15 234.185 1 Pair rear door beadings 16 152.256 24 Retainer, bonnet beading 17 173.149 4 Clip 18 152.273 10 Retainer, door beading 19 165.922 2 Bolt and stud 20 152.273 10 Retainer, door beading 21 172. 2 Clip 22 172. 26 Clip, rear beading 23 234.487 2 ‘B’ post finisher, up to Sept 1966 234.488 2 ‘B’ post finisher, Sept 1966 on 24 142.263 1 Mirror, rear view

lLL No PART No QTY DESCRIPTION

25 165.821 2 Screw 163.240 2 Washer, plain 26 142.234 2 Headlight spear 27 140.575 1 Grill, Jaguar 28 140.576 1 Centre piece, badge holder 29 141.867 1 Grill badge, 2.4 30 141.868 1 Grill badge, 3.4 31 141.869 1 Grill badge, 3.8 32 142.170 1 Backing piece for grill badge 33 139.931 1 Grill fixing kit, Jaguar 139.932 1 Grill fixing kit, Daimler 34 140.658 1 Grill, shell only, Daimler 35 140.659 1 RH grill slat ass. 36 140.660 1 LH grill slat ass. 37 142.240 2 Horn grill, when no fog lamps are fitted For mirrors, see also page 60 38 141.011 1 Lucas repro mirror, convex, RH wing or LH door 141.012 1 Lucas repro mirror, convex, LH wing or RH door 39 141.116 2 Curved stem arm 40 141.627 2 Offset stem arm 41 141.117 2 Round mirror, convex 42 141.953 2 Oval mirror 141.628 2 Rectangular mirror 43 159.894 1 Veneer custom one wood set, see info ! 44 165.641 1 Screw set, 20 screws and 20 cup washers

© V a n G e s t e l B & C 2 0 0 558

Interior, seat components, headlining, seat belts, etc..

lLL No PART No QTY DESCRIPTION

Our complete trim kits contains:Carpet set, A,B,C & D-post panels, under dash panels, boot mat, furflex, panel kit, connolly leather seat covers front & rear, headlining, under felt kit, rear parcel panel, vinyl, centre console kit, radio console kit, panel and carpet fixing kit. Please note that seat foams, seat wood boot trim panels etc are Not supplied in our kits, Ask your local salesman for more information. 1 158.347 1 Trim kit, Jaguar 2.4/3.4/3.8, up to 1964 158.348 1 Trim kit, Jaguar 2.4/3.4, 3.8 1964 on 158.349 1 Trim kit Jaguar 240/340 158.350 1 Trim kit, Daimler V8 158.351 1 Trim kit, Daimler V8 250 2 157.094 1 Pair front seat base foams, Jaguar 157.095 1 Rear seat base foam, Jaguar 3 157.096 1 Pair backrest foams, front, Jaguar 157.097 1 Rear seat backrest foam, Jaguar For Daimler ask for details 4 142.344 2 Reclining handle, without knob 5 122.497 8 Rubber buffer, fold down table( Picnic) 6 234.132 1 LH seat runner with lock 234.126 1 LH seat runner, plain 234.131 1 RH seat runner, with lock 234.125 1 RH seat runner, plain 7 139.536 1 Seat fixing kit for two seats 8 159.895 1 Head lining kit, grey 159.896 1 Head lining kit, beige 159.897 1 Head lining kit, green 9 151.097 A/R Insulation felt 10 187.009 1 Glue gel, 625gr 11 159.898 1 Pair sunvisors, grey, Nov 1960 on, without chrome surround 159.899 1 Pair sunvisors, beige, Nov 1960 on, without chrome surround 159.900 1 Pair sunvisors, green , Nov 1960 on, without chrome surround 12 142.233 2 Bracket, chrome, sunvisors 13 139.537 1 Screw kit, sunvisiors 14 159.901 1 Glove box

lLL No PART No QTY DESCRIPTION

15 166.083 2 Thumb screw, centre dash 16 168.265 2 Fibre washer 17 162.076 4 Screw, hinge centre dash 18 165.480 4 Screw, glove box hinge 19 141.880 1 Glove box lock 20 166.147 3 Wood screw, glove box lock 21 142.244 1 Medallion on lid of ash tray 22 141.747 2 Ash tray, fits in rear door armrests 23 139.933 1 Fixing kit, gearbox cover to body 24 122.538 1 Gaiter, gear lever 25 026.219 1 Ring, gaiter gear lever 26 165.465 2/4 Knurled nut, securing central console side panels, early cars use 2 27 1 Gear lever gaiter, leather, ask for details, also in Ill. No. 1 28 1 See heater system page 22 29 251.088 1 Boot mat, black, also in Ill. No. 1 30 251.089 1 Pair boot side panels, dark grey 31 172.138 80 Trim panel fastener, 22 for one front & 18 for one rear door 32 152.287 28 Carpet socket, female 33 152.286 28 Carpet socket, male 34 152.283 10 Carpet fastener, bow type 35 150.836 A/R Bitumen sound deadening pad, 66 x 20cm 36 251.090 1 Pair front foot mats, two piece type, up to May 1964, ask for colour 37 251.091 1 Pair front foot mats, one piece type, May 1964 on, ask for colour 38 121.275 10 Furflex, black, sold per meter 121.276 10 Furflex, red, sold per meter 121.420 10 Furflex, blue, sold per meter 121.421 10 Furflex, beige, sold per meter 121.643 10 Furflex, green, sold per meter 121.644 10 Furflex, grey, sold per meter 39 185.776 2 Static belt 3 point, black 40 185.775 2 Automatic belt 3 point, black

Grey Fawn Green

59© V a n G e s t e l B & C 2 0 0 5

I.D. Plates, Stickers, badges and badge bar

lLL No PART No QTY DESCRIPTION

1 085.397 1 Chassis plate, Jaguar 2 085.399 1 Chassis plate, Daimler 3 085.165 1 Screen jet decal 4 085.406 1 Run-in decal, red, both sides printed, Jaguar 5 162.376 1 Screw & nut kit 14 pieces 6 152.034 1 Set of small rivets, 10 pieces, for I.D. plate fixing 7 085.386 1 ‘Trico’washer bottle decal 8 085.408 1 ‘Made in England’ plate 9 085.260 1 Battery sticker, gold/red 10 085.082 1 ‘Lucas’Coil sticker 11 085.455 1 ‘Marston Excelsior Ltd’plate, for radiator 12 085.413 1 Jaguar sticker, red on white, accessory 13 185.154 1 GB letters, chrome, fixed with nuts 14 185.002 2 Union Jack badge, top quality 15 162.405 4 Screw, chrome plated

lLL No PART No QTY DESCRIPTION

16 161.054 4 Nut 17 185.708 2 Union jack badge, with dummy screws 18 085.172 1 AC Sticker, air cleaner, square type 19 085.385 1 AC Sticker, air cleaner, round type 20 081.561 1 Cable identification set for HT leads 21 185.712 1 Key-fob, Jaguar 22 185.605 1 Key-fob, Daimler 23 185.210 1 Key-fob,black leather, Union jack 24 140.418 1 Badge bar, straight, 61cm and ¾” thick, comes with two adjustable feet. 25 185.049 A/R Clamp, badge to badge bar 26 133.834 A/R Mounting plate, badge to clamp 27 085.096 1 Saint Christopher badge 28 085.158 1 Royal Automobile Club badge 29 139.370 A/R Stainless steel screw kit, badge to clamp

12

11

10

9

8

7

654

32

23201918

17

16

1514

13

1

2221

25

27

24

28

26

29

© V a n G e s t e l B & C 2 0 0 560

Mirrors

Part nr.

141.192 Part nr.

141.852

Part nr.

141.949

Lucas repro mirrorwith Covex glass

Seal

Part nr.

141.930

Pair wing mirrors

Chrome plated

Part nr.

141.942

LH or RH door mirrorFlat glass, 45° stem

Part nr.

141.929

Part nr.

141.950

Clamp-on mirrorsNo drilling holes, clamps onto windscreen frame

Classic styleRound clamp-on

Round clamp-on

Classic stylewith tightening screws Classic round style

with tightening screws

6846

608

141.011 RH wing or LH door141.012 LH wing or RH door

Part nr.

141.627

Curved stem armOn spring

Offset stem armOn spring

Part nr.

141.117

Part nr.

141.953

Round mirror108mm diameter, Convex glass

Rectangular mirror124X82mm, Convex glass, ‘E’ MARKET

Part nr.

141.116

61© V a n G e s t e l B & C 2 0 0 5

Engine tuning & accessory parts

Part nr.

017.208

Part nr.

101.854Part nr.

101.853Part nr.

017.205

Tappet hold-down kitThe tappets guides can work loose, especially under the stress of high RPM or even just a lot of Km. This guide hold-down kit is the prevention needed. Fitting this kit is always less expensive that a loose tappet can cost you. Only required for left side tappets.

Special adaptor collar For 2.1/2” Aston or Monza oil filler cap. This collar has a double thread and will fit all XK’s valve covers up to the XJ6 Series II. Once the collar is fitted you can choose your own foil filler cap design, either Monze or Aston.

ASTON Oil filler cap2.1/2” diameter and chrome plated. To be used with the adaptor collar 017.205.

MONZA Oil filler cap2.1/2” diameter and chrome plated. To be used with the adaptor collar 017.205.

Pair reconditioned rocker coversHighly polished and ready to fit.

Vibration DamperThe finest available, full racing specification vibration damper.A must for high RPM use or just for a smoother running engine.

Part nr.

017.278

Lightened, fully balanced flywheelSold on an exchange basis and drilled to accept both standard and 9.1/2” diaphragm type clutch cover. This flywheel comes complete with a new 104 teeth ring gear fitted.

Composite head gasketFor long life and will hold high compression.Should be fitted dry to skimmed head and block surface.

Part nr.

013.843

Pair reprofiled camshaftsfor 3.4, 3.8 or 4.2cc engines. Fast road specifications. These all round cams improves mild range. Cam lift 380 or 9.67mm, duration degree 270 , timing 25/62 62/25, Valve clearances IN 6 EX 8 (thou).

• 013.844 Pair reprofiled camshafts for 3.4, 3.8, 4.2cc engines. Road competition, useable on road and best with triple SU’s or Webers. Cam lift 426 or 10.82mm, duration degrees 308, timing 52/76 76/52, Valve clearances IN 6 EX 8 (thou).

Part nr.

018.056

Heavy duty valve spring setThese heavy duty springs eliminate float at high RPM will result in a constant power delivery.

Part nr.

200.839

Cam alignment toolFor XK six cylinder and V12 engines.

Part nr.

200.869

Part nr.

017.102

‘Metalastik’ high quality engine mountings

This is one of the most important improvements, even for a fast road specification

engine.

New lift Old lift

Increasein lift

The picture below explains that by grinding a lobe smaller, more lift can be achieved. By reducing the base circle diameter, not only the size of the lobe is reduced. When adjusting the valve clearance, the cam follower sits closer to the shaft and the levering of the lobe is increasing, and thereby increasing the lift.

Part nr. Description

016.823 3.4 Composite head gasket 016.824 3.8 Composite head gasket

Part nr. Description

018.066 2.4, 3.4 & 3.8 018.080 4.2

Part nr.

017.430 Core plug strap kit These little straps are designed specifically

to hold your core plugs tight to your engine block.

© V a n G e s t e l B & C 2 0 0 562

Oil improvement, starter motor

Part nr.

185.093

Part nr.

185.622

Part nr.

013.811

High output oil pump For maximum oil delivery. You will have to improve the oil pick-up as well.

Part nr.

190.058

British parts, tools & accessories catalogue

Rear crankshaft oil seal conversion kit Very functional but the rear of the crankshaft has to be ground to 75mm before fitting this kit.Replacement oil seal 016.859

Part nr.

011.917

Push-on oil stat 80°C.

Spin-on oil filter conversion kit

011.050Filter sold individually

A big improvement, not only to keep the oil temp. In control but this improved head has a better pressure valve.

Oil cooler kit

Part nr. Description

185.720 3.4, 3.8 Early 185.... 3.4, 3.8 Late

* Replacement oil filter use 017.113

Oil cooler radiator, ½”BSP connections

Oil cooler shroudFor cold mornings or when temperatures are getting low, do not

undercool the oil and fit this shield or an oilstat (shown on this page).

Part nr.

185.440

Part nr. Description

060.016 10 Row oil cooler 060.003 13 Row oil cooler

High performance

starter motorPart nr. Description

017.212 Up to KH1001-KH7062, 3.8 all LA, all LB, LC1001-LC4264017.281 3.4 from KH7063-KH9999, 3.8 all KJ, LC4265-LC9999, all 7J

Part nr. Description

082.156 2.4, 3.4, 3.8 Starter motor 082.157 4.2 Starter motor

Screw-on oil stat 80°C with professional ½”

BSP connections.

63© V a n G e s t e l B & C 2 0 0 5

Part nr.

185.127

Cooling improvements

Flexi fanAs the engine speeds up the blades of the flexi fan blades flatten out causing less drag and noise.When the RPM drops for use in traffic the blades pull more air.

Part nr.

061.525

Aluminium radiator supplied without fan

Aluminium radiator with single Kenlow fan fitted

Bypass closing thermostat

74° Any cooling problems? Start checking if this type thermostat is fitted.

Once the thermostat opens, it will block the bypass and makes sure all water has

to go through the radiator.

Part nr.

018.042

Water WetterThis super coolant helps control overheating by reducing surface tension inside the radiator. Your car can run up to 7°C cooler. Use only one or two of these bottles and the ‘Water Wetter’ will do the job.

Fan switch radiator mountingFor customers who want to fit their own fan,

but, would like to take advantage of the very famous Kenlow adjustable thermostat

switch, we offer this switch on its own aswell.

Part nr.

185.130

4 Liter Coolant for winter & summerThree of these are required to

fill-up an XK cooling system. This coolant acts as an anti-freeze

and protects from corrosion. DO NOT USE just water , it will damage

aluminium ( cyl.head etc.).

Part nr.

186.159

Part nr.

198.044

Kenlow Fan KitFits in front of the radiator and has an automatic control. This Kenlow fan kit has a 13” fan and comes complete with an adjustable thermostat switch. Two fixing systems are supplied in our kits, you can mount the fan on aluminium brackets, or, use the nylon straps to fasten the fan direct to the radiator core.

Part nr. Description

060.120 MK2 3.8060.139 MK2 2.4, 3.4

Part nr. Description

060.138 MK2 3.8060.140 MK2 2.4, 3.4

© V a n G e s t e l B & C 2 0 0 564

Unions

Carburettor accessories & air filters

Description Part nr.

For 5 PSI pump 101.192 pair For 7.5 PSI pump 108.541 pair

For 5 PSI pump 108.210 pair For 7.5 PSI pump 108.542 pair

Three piece tool kit, SU

Part nr.

102.302

Facet Pumps

Part nr.

190.056Part nr.

190.586Part nr.

190.225

Earth Positive + Negative -

5 PSI 108.287 101.1917.5 PSI - 108.209

Part nr. Description

200.682 1.3/4” SU200.683 2” SU

Adaptor for SU, sold individually

Part nr.

101.330

Part nr.

108.247

Part nr.

101.422

K&N airfilter off-set tapered

(compact) 1.3/4”

K&N airfilterPart nr. Description

185.012 1.3/4” central101.338 1.3/4” off-set

Breather hose adaptor ½” Flange, ¾” long

Cleaner spray for inside & outside

Part nr.

198.015

Cleaner for the filter elements

Part nr.

186.043

Special oil spray for K&N filter elements

Part nr.

198.042

Fuel Pressure RegulatorAnother quality product to make sure yourpressure is optimal

Part nr.

101.819

In-line Fuel filter It’s important that your fuel has been filtered properly

Part nr.

101.821

King filter regulator with glass bowl (67mm) 1.5-5PSI, ¼” bore

Part nr.

108.248Replace-ment fuel filter

Flexible fuel hoses Partn° Lenght102.095 6 cm length101.325 17 cm length101.384 19 cm length101.326 25 cm length101.327 30 cm length101.328 35 cm length101.047 38 cm length

Ram pipes for SU When the air filters are not fitted, these ram pipes improve the flow. Made from spun alloy tubes with a radius and mesh guard.

Part nr.

101.147

One pair ‘Midlock’ synchro tester

Part nr.

200.679

SU Box spanner For needle and seat

Part nr.

200.739

Set of tools to tune up your SU This kit includes a mixture test gauge, rods ti set the float level, jet wrench, a jet centering tool and instructions

Part nr.

200.573

Dashpod damper oil

Part nr.

330.070

Part nr.

102.216Grosse jet

Needle & seat improvement

This efficient fuel cut-off

is based on a ball system. This will be the last

needle & seat you order.

Part nr.

200.572

Hose clamp

Part nr.

172.051

Carburettor synchronizer

tool

65© V a n G e s t e l B & C 2 0 0 5

Ignition improvements

The benefits of the Magnetronic are: it is quick and easy to fit, completely self contained within the distributor and is a two wire connection. The unit is housed in a solid die-cast dissipating body which is unaffected by distributor wear and gives all the advantages associated with our Ignition Systems.

NEGATIVE EARTH ONLY!

System with mechanical distributor and contact points.

Lumenition, no wearing parts & always perfect timing.

Originally for Neg. earthed cars, ask for wiring info when pos. earthed

Fitting Kit for distributor

Ask your local Anglo Parts shop for more information

Power supply module

Partn° Lucas model

086.579 22D6

Magnetronic ignition systemTo replace contact breakers and condensers

Lumenition is proud to present the NEW Magnetronic Ignition System. Designed to replace troublesome points with a simple drop in installation. Each unit comes complete, ready to fit straight into your existing distributor. You will notice that your car will start immediately, have better fuel con-sumption, and increased performance. The Magnetronic Ignition System is suitable for most Lucas distributors, NEGATIVE EARTH and with or without vacuum advance.

Optronic ignition systemLumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will remain permanently tuned. The engine will start better, last longer and run more economically through improved efficiency. There are only three components, very compact and simple to fit.

Formula Power, silicone high tension lead set

Aluminium spacer blockSpark plug wire holder, made from solid aluminium

Super lead set, originally developed for race. Minimum loss and

greatly extended cable life. Spiral magnetic 4 core 10mm blue

silicon extreme heat resistance. Can also be fitted to a much more powerful coil if needed

Part nr.

185.743

Part nr.

181.065

Late style with 90° end caps at spark plug

Distributor

Lucas DMBZ 6A Jaguar

Lucas 22D6Jaguar

Lucas 40676K-20Daimler

Part nr.

086.082+086.462

086.082+086.081

086.082+088.276

}}} Magnetronic

ignition coil High energy electroni-cally matched for optimum output from the Magnetronic system. (must be used with a ballast resistor) if not already fitted then Part No. 086.608 is required.

Part nr.

081.656

Optronic ignition coil High energy electronically matched for optimum output from the Optronic system.

Part nr.

185.657

Part nr.

081.195

Sport coil, NOT for electronic ignition

© V a n G e s t e l B & C 2 0 0 566

5 speed gearbox, & asbestos free heat reduction products

Getrag conversion kitJaguar MKII

Exhaust heat shield kit, Jaguar

Part nr.

232.787

Bolts direct to the orginal bellhousing

This kit comes complete with a propshaft,

clutch plate and completely rebuilt 5 speed gearbox

Part nr.

020.244

Versa shield60 x 18 cmUniversal heat shield to protect starter motors, carburettors, electrical parts, fuel pumps etc.. from heat. Can be cut to shape and secures itself using the velcro provided.

Heat shroud90cm long and covers from 2 to 3cm wire or hose.A fast and efficient solution for hoses, lines and tubes. Easy to use and install, the heat shroud utilizes a full length hook and loop material as a closure. Can be cut to length with a sharp knife.

All 100% asbestos free

Exhaust wrap5cm wide by 1500 cm long.Reduces the engine bay temperature with up to 45%. This temperature reduction is beneficial towards breathing. Cooler air and avoiding premature failure on costy engine components due to thermal deterioration.

StrapHandy strap for securing the wrap around tubes and small parts.

Heat screen100cm x 90cm Designed with many uses in mind. Heat Screen is capable of withstanding direct heat up to 500 C° on one side, while protecting against radiant temperatures up to 1000 C° on the aluminised side.

Part nr.

159.404

Part nr.

159.405

Part nr.

172.076

Part nr.

159.408

Part nr.

159.406

Cool-tape3.5cm x 450cm

Used for wrapping wires, small relay's,

hoses etc.. in the engine bay. Very strong adhesive.

Part nr.

159.407

Bonnet firewall insulation kit

Part nr.

159.902

67© V a n G e s t e l B & C 2 0 0 5

Power steering rack conversion LHDSteering and suspension improvements

• With electrical pump and alternator • Comes with fitting material • For Daimler ask your local salesman

Front/rear shock absorbers, Spax or Koni Jaguar and Daimler*two required

Polyurethane suspension bushes kit Jaguar and Daimler

Uprated anti-roll bar kitJaguar and Daimler

Rear suspension conversion kit

Part nr. Description

045.311 3.4 & 3.8045.312 2.4

Part nr. Description

045.341 Front kit, 5/8” anti-roll bar045.342 Front kit, 11/16” anti-roll bar045.343 Rear kit

Part nr. Description

045.314 Spax, front 042.841 Koni, front045.315 Spax, rear042.842 Koni, rear

• Improved the handling drastic • Jaguar and Daimler

Part nr.

045.313

Part nr.

045.346

© V a n G e s t e l B & C 2 0 0 568

Improved brakingPart nr.

050.523Part nr.

050.524

Part nr.

050.525

Coopercraft uprated brake system for Jaguar and Daimler* Easy to fit * Stainless steel pistons * New and improved calliper design* Uses your original brake disc * No modifications are required

Coopercraft rear improvement kit for Jaguar and Daimler* Redesigned and uprated cylinders* Stainless steel pistons* Utilizing the standard handbrake system* Easy fitting* Good balance with the front uprated set

Vented disc kit for Jaguar and Daimler* For ultimate stopping power * Easy fitting with no modification neccessary* Improved cooling in the arduous braking conditions of modern traffic

Part nr. Description

054.793 Front brake hose, 2 required054.794 Rear brake hose

The one thing that has the most dramatic effect on car braking performance is the

quality of the friction materialGIVE IT A BRAKE, GIVE IT

GREENSTUFF!!* Resist higher temperatures

* 20% more grip* Less black dust

Part nr.

053.306For Jaguar and Daimler3 & 4 pot callipers green pads(kit 050.523 & 050.525)

Part nr.

053.495Square callipers green

pads for Jaguar and DaimlerFor kit 050.524 and the original callipers

Replacement pads

053.306 Green stuff brake pads053.331 Standard brake pads

Stainless steel braided hoses for Jaguar and Daimler

Brand new Lockheed servo unitfor Jaguar and Daimler

For in-line installation. Also see British Parts catalogue ‘190.058’ page 54.

Part nr.

053.082

Part nr.

053.018

Part nr.

053.039

1L Silicone brake fluid

1L DOT 4 Lockheed brake fluid

69© V a n G e s t e l B & C 2 0 0 5

Alternator/starter conversion & elektrical improvements

Alternator conversion kit For negative earth application

Jaguar only

Part nr. Description

082.154 Single groove pulley082.172 Twin groove pulley

Wiring info: Alternator conversion wiring for NEGATIVE earth carsAt regulator box: *Change thick yellow wire from ‘D’to ‘A’or’B’ *Change yellow/green wire from ‘F’to’D’At alternator: * Yellow/green to small terminal *Yellow wire to either of large terminals

Replacement starters Jaguar only This modern reliable starter gives more torque with less power drain when starting, this makes it ideal for daily use. They are also easier to install as they are lighter and smallerPart nr. Description

082.156 2.4, 3.4 & 3.8082.157 4.2

Improved 2 speed wiper system For Jaguar and DaimlerWhen your wiper motor is damaged, you have 2possibilities to have it fixed:1) Your old core (the original wiper motor on your car) can be rebuilt, see picture on the right side, the original Lucas wiper motor.2) You can buy a new wiper motor, also Lucas, and comes with a handy two speed wiper system, see picture above.

Part nr.

082.236

Electric window kitFor Jaguar and DaimlerWith this electric window kit you can open and close your windows without any effort at all. Kit for 2 windows: • Comes with fitting instruction • Color diagrahm • All wiring • Accessories

Central door locking kit For Jaguar and Daimler

Kit for all 4 doors, comes with fitting instructions • color diagrahm • all wiring • accessories

Part nr.

185.680

Part nr. Description

185.832 Kit for 2 front doors only185.833 Kit for 2 front & 2 rear doors

© V a n G e s t e l B & C 2 0 0 570

Competition wheels, Coombs spats and spinners

Narrow (Coombs style) rear spats

For Jaguar and Daimler

Part nr.

198.050 Luster Lace, metal polishThis is the best way to polish your chrome and stainless steel metal. It’s so simple and effective. The polish is in the cloth that you wrap around your chrome wheels etc. Test this very simple way of polishing and you’ll be astounded!

Part nr.

047.100

16” Protection band

Part nr. Description

042.217 RH ‘Jaguar’ federal 042.218 LH ‘Jaguar’ federal

Part nr.

042.221

Remover tool, for 52MM federal

Part nr.

186.034 Copper greaseWith wire wheels your hubs and spinners get very hot.Normal grease becomes liquid and disappears, causing them to get stuck with risk of damage. This copper grease withstands these high temperatures and makes it easy to remove spinners.

Part nr.

042.097

Hammer, copper/rawhide

1.15Kgr.

Competition wheelFor Jaguar and Daimler

It might be needed to fit narrow (Coombs style) rear spats for more clearance to the rear wheel

Part nr. Description

046.035 6 X 15 Chrome competition wire wheel 046.034 6 X 15 Painted competition wire wheel046.145 5.5 X 15 Chrome competition wire wheel046.144 5.5 X 15 Painted competition wire wheel

Part nr. Description

042.219 RH ‘Daimler’ federal042.220 LH ‘Daimler’ federal

Part nr.

185.704

52MM Spinner remover

Part nr.

185.050 Wire wheel cleaning brush

Part nr. Description

232.785 RH rear spats, narrow (Coombs style) 232.786 LH rear spats, narrow (Coombs style)

Part nr. Description

042.211 RH 2 eared ‘Jaguar’ 042.212 LH 2 eared ‘Jaguar’042.213 RH 2 eared ‘Daimler’042.214 LH 2 eared ‘Daimler’042.215 RH 2 eared plain042.216 LH 2 eared plain

The picture above shows you a standard wire wheel (partn° 046.029) on a Jaguar MKII with standard spats. It’s necessary to fit the narrow

(Coombs style) spats, see picture below, when fitting competition wheels on your Jaguar MKII, for more clearance to the wheels.

71© V a n G e s t e l B & C 2 0 0 5

These quality accessories are made from strong, finely fini-shed solid wood. They are a must for the classic driver who likes that extra bit of finesse.Since the early fithties Moto-Lita has been designing and manufacturing unique steering wheels in wood and leather. Each steering wheel is a piece of artwork built by British craftsman. The wooden steering wheels are made from carefully selected cross-laminated timber which is bonded and rivetted to a high quality hand polished alloy 3 spoke frame. They are then handfinished with a hardwearing deep lustre finish which is resistant to petrol, oil and the elements.

Aluminium billet centre hub cap 3 ½‘’

Part nr.

185.831

Classic four spoke MK3 Wood rim MK3 Leather

Highly desirable ‘Derrington’style 16”steering wheel• Comes with hub, horn ring/horn ring cover not included• Use custom one ring/ring cover• Jaguar and Daimler

Part nr.

185.388

Boss for Moto-Lita steering wheels• Except ‘Derrington’ style steering wheel • Jaguar, for Daimler order also badge 085.485

Part nr.

185.830

Derrington & Moto-Lita steering wheels

Part nr. Size

185.689 35CM185.690 38CM

Part nr. Size

185.026 35CM185.027 38CM

Part nr. Size

185.156 35CM185.157 38CM

Moto-Lita Steering wheels

‘Derrington’ steering wheel

The picture above shows a complete ‘Derrington’ Steering wheel. For more info about how to put this steering

wheel together, and what parts you needsee page 42 or call your local Anglo Parts salesman.

© V a n G e s t e l B & C 2 0 0 572

Car covers, cap and pewter models

Ill. Part nr. Description

1 195.206 Jaguar XK1202 195.208 Jaguar XK1503 195.209 Jaguar C type4 195.210 Jaguar E type, series 1 coupe5 195.211 Jaguar E type roadster6 195.212 Jaguar E type V12 coupe7 195.213 Jaguar E type V12 roadster8 195.214 Jaguar MK29 195.215 Jaguar XJ610 195.216 Jaguar XJS11 195.217 Jaguar XK8

11

8

7

5

1

Green indoor car coverMade from 100% pure cotton, the inside has been brushed to give a soft flannel

appearance. Although the material has been pre-washed, we recommend washing in cold water and soft soap.

Part nr.

159.520

Car cover MoltexMoltex car covers are made from strong lightweight breathable waterproof material. Whether you are looking for an in-door car cover, or a way to keep the sun off your car during the day,

or an all season outdoor car cover, a Moltex car cover is the best solution. These universal car covers come with a stowage bag and two elasticated ropes with four hooks to keep the

cover securely in place. Make sure the cover doesn’t move because of wind.

Tighten with additional ropes or elastic to avoid the car cover making matt areas

through friction!

Part nr.

159.517

PEWTER

MODELS

Jaguar cap

Part nr.

185.674

73© V a n G e s t e l B & C 2 0 0 5

Practical accessories and safety products

KRYPTONITE automotive security• 5 years warranty • Steel reinforced keyway • Hardened steel resists prying, freezing, saws, bolt cutters • Protective vinyl coating • Pick and drill-resistant lock mechanism • Easy to use • Complete instructions and key registration (info inside packing)

Fire extinguisher ‘E‘ Approved, 1 Kgr dry chemical fire extinguisher. We hope you will never have to use it, but, just in case, have it with you.

Water wetter This super coolant helps control overheating. Your car can run up to 7°C. cooler. 355 ml.

Part nr.

185.790

Part nr.

086.604

Part nr.

185.332

Part nr.

198.044

Automatic battery conditioner & tester

• Automatically recharges used battery cells • Suitable for all vehicle types: cars, motorbike, boats, caravans... • Unique testing facility allowing

‘easy chek’ on battery capability and condition • L.E.D. monitoring display system/battery status display • Permanent unsupervised use. Polarity warning signal • Dimensions: 5X6X10cm, easy storage • Charges every 12 Volt battery

with a minimum of 13.2 Volts input can go up to a maximum of 13.8 Volts.

Battery switch FIA approved

Oil drip pan Is useful to put under your lawn-mower, British bike or even under your Classic car (1200 x 640 mm)

Part nr.

132.646

Part nr.

284.092

Part nr.

284.177Rear Foglamp Reverse light

Part nr.

086.782

© V a n G e s t e l B & C 2 0 0 574

Lead replacement lubricants and oil

Part nr.

198.042

HPR 20W/60, 5L A mineral oil formulated for most post-war classics, particularly high performance vehicles such as MG,Porsche, Jaguar and Triumph. Suitable for cars running six volt electric systems, where starter motor cranking speeds require an engine to turn over with minimal drag. Meets API SJ/CF.

Part nr.

300.501

Castrol Classic 20W/501 gallon 4.5 LiterFor pre - 1980 Modern Classic Cars, Castrol Classic XL20W/50 is a low detergent traditional multigrade engine oil, ideally suited for older technology modern classics.

Part nr.

300.522

VSP PLUS Lead substitute &octane boosterTo be added to unleaded fuel as a replacement for 4 star leaded petrol. Most pre-1990 or classic cars have soft 4 valve seats in the engine wich means they cannot run on unleaded petrol without risking severe valve seat wear wich could lead to further significant engine damage.VSP PLUS uses advanced Manganese technology wich:• protects against valve seat recession • Boosts octane of unleaded petrol typically back to 4 old star leaded levels • removes the need to retard the ignition •prevents pinking when using unleaded fuel • tests on U.K. refinery fuels confirm an average increase of 2 octane numbers when added to unleaded fuel • OK for 40 L

Castrol oil pourers

Competition Valve Lubricant

For competition ONLY!A truly effective lead replacement valve lubricant for use in unleaded

petrol under race conditions. Most classic racing cars (single seaters, sports cars or racing saloons) need the

protection of lead for valve lubricant to prevent exhaust valve recession. This means it is not advisable to run

these race tuned cars on unleaded petrol without risking severe valve

seat wear which will destroy the engine. CVL uses proven, advanced fuel additive technology to prevent

valve seat recession under high engine loads, experienced in race conditions.

Valvemaster PlusCastrol valvemaster is a phosphorous based additive to enable you to use unleaded petrol in your classic without modifying the engines soft valve seats. The formulation has a long history of use as a lead replacement additive in North and South America,Australia, New Zealand and Europe. Castrol Valvemaster is endorsed by the Federation of BritishHistoric Vehicle Clubs (FBHVC) following the tests developed by that independant body. Castrol are confident that it can beused under all driving conditions and that it is compatible with both LRP and leaded fuel. Supplied in 250ml bottles, with a built in measuring device. 10ml treats 10 litres of unleaded giving you the flexibility to fill up with varying quantities of fuel. Castrol Valvemaster Plus has the addition of an octane booster to reduce pinking or knocking in tuned or high compression engines without the need to retune. • 250ml treats 250 litres of unleaded fuel • Ultimate protection against valve seat recession • Provides an octane boost to unleaded fuel, reducing knocking • Protects engine under all driving conditions • Reduces the need to re-tune • Keeps the fuel system clean and provides excellent corrosion protection • OK for 40 L

Part nr.

198.059

Castrol oil

Part nr. Description

200.735 1 pint (0.568 Liters)200.749 1 Quart (1.136 Liters)

Part nr. Description

085.418 5” Stickers085.381 10” Stickers

Stickers

Part nr.

200.758

Penrite oil can, 1L

Part nr.

198.058

75© V a n G e s t e l B & C 2 0 0 5

Auto glym & body care products

AUTOGLYMSimply

outstandingPart° Description

198.005 480ml car shampoo & conditioner198.008 Cutting polish for badly damaged paint198.007 Super resign polish198.011 Extra gloss protection198.006 Clean wheels198.031 Instant tyre dressing198.009 Bumper care (rubber)198.012 Glass protection198.035 Fast glass cleaner (spray)198.013 Interior shampoo198.010 Vinyl & rubber care198.014 Instant tar remover198.003 Chrome polish (tube 75gr.)198.033 8 x polishing clothes198.039 Leather care198.057 Engine cleaner

Car dusterThis 100% cotton dusting mop has been specially treated to trap dust. Shake out and it’s ready to use again.DO NOT WASH OUT

Car wash handshoeThe perfect cloth for washing your classical

ChamoisWe offer only the best real natural chamois. These are specially made for the car industry having larger dimensions than most of them and are thick and extremely soft. Approx. 40 x 62cm.Made in England of course.

The proffesional wringerHeavy duty industrial quality wringer for chamois, towels etc.Specifications: Rustproof all steel frame, maintenance free rollers and bearings, adjustable pressure over the entire length of the rollers for uniform water removal.The complete wringer machine has two strong clamps for easy attaching

Connolly hide careDon’t let leather dry out! Use this at least once a year

Part nr.

198.061

Part nr.

185.551

Part nr.

185.351

Part nr.

185.046

Part nr.

185.343

Part nr.

185.334

Part nr.

185.335

Autoglym gift pack

Hydra bladeEffortless removal of shampoo rinse water

Part nr.

198.060

Connolly hide care kitFor cleaning and preserving

hides, upholstery and all leather

clothing

© V a n G e s t e l B & C 2 0 0 576

Jaguar & Union Jack accessories

Jaguar sticker10 x 4cm

Part nr.

085.413

Jaguar patch, 11 x 7cm

Part nr.

185.756

Part nr.

185.712

Part nr.

085.357

Jaguar mugPart nr.

185.751

Part nr.

185.736 Jaguar umbrella

Union Jack Flag, 70 X 100 cm

Union Jack patch52 x 78mm

“Union Jack”on pinFine chrome & jewellers enamel

Union Jack badgeQuality chrome with jewellers enamel.A masterpiece for your car. 34 x 57mm

Magnetic U.J.For your car or as decoration & souvenir.measurements: 90 x 55 mm

Union Jack stickerFor your car or as decoration & souvenir. measurements: 73 x 43 mm

Key fob Union

Jack

Union Jack desk dressing

flag

Union Jack with dummy screwsIf you don’t like to drill fixingholes, you can tape this badge showing screw heads. 34 x 57mm

Part nr.

185.199

Part nr.

185.174

Part nr.

185.219

Part nr.

185.708Part nr.

185.002

Part nr.

085.157

Part nr.

185.210

Part nr.

085.149

Part nr.

185.709

Union Jack soft adhesive

badge, 27mm dia.

Part nr.

085.362

Chrome GB stick-onPart nr.

185.755

Part nr.

185.753

Pair Union Jacks soft adhesive badges, 29 x 51mm

Nut

Part nr.

162.405Part nr.

161.054

Part nr.

185.605 Key fob Daimler

Key fob Jaguar

Jaguar soft adhesive badge, 27mm

Screw

77© V a n G e s t e l B & C 2 0 0 5

Rally instruments, tripmasters, warning lights and bucket seats

The perfect trip master for professionals

and amateurs. Approved for rallying &

racing. With handle to control the counting;

forwards, backwards or stop. Special knob to get back on

track when a mistake is made, also a knob to temporarily stop recording when leaving the track

for the loo etc. After installation the distance recorder will need calibrating to your car’s specifications . This can be achieved by testing the

distance over 1 km, and noting the difference on the recorder. The recorder must then be returned for fine tuning.

Part nr.

086.405 Belmogtwin MK IIFully mechanic

distance recorder

Part nr.

083.815

Retro TripThe precision

distance recorder.Approved by many historic rallys. Easy calibration in miles & meters.

Belmogtwin ‘R’A strong, reliable and fully mechanical odometer with two

counters. Registers hundreds of a km or a mile. allowed for F.I.V.A & F.I.A. classic events.

5 mm digits are illuminated by a light and enlarged by magnifying lenses.

Available in 6v and 12v. Instantaneous zero setting. Setting knob for addition,

neutral and substracting. Figure counter control and setting can be carried out for

both counters. Adjustment gear for very acurate calibration. Supplied complete with fitting T-gear, drive

cable and circlips.

Part nr.

088.092

Belmog “Hanhart” Rally chrono instruments excellent chrono instruments with the following specifications:

(088.087) hour counter with 1/5 second recorder, 60 min. register,+ 10 hour, 60 second sweep, jumping minute hand, pinlever, shock protected, 11 jewels, unbreakable spring, brass alloy case.

(088.088) minute counter with 1/5 second recorder, 60 min. register with coloured minute dial, 60 second sweep, flyback to zero and simultaneously restart, jumping minute hand, shock protected

and extended dust and water resistance, 7 jewels, brass alloy case.

Part nr.

088.087Part nr.

088.088Mechanical hour counter

Mechanical Minute counter

Baseplate2 counters

Clip

Part nr.

088.091

Baseplate1 counter

Part nr.

158.329

Pair trimmed bucket seats These are leather trimmed to specialorder and we can easily combine our trim kits with these seats. The base is made from strong reinforced fibreglass. If you require tilting this seat we recommend to fit MG T type seat sides to the seat frame. Needs some modification. SEATS ARE MADE AT SPECIAL ORDER, ask your local salesman for details.

Warning lights available in four colours

These warning lights have been specially chosen to suit British dashboards &

fit in our mountng plates. Each light contains a bulb and two lucar terminals

(earth & power).

Two & three hole mounting platesPeriod reproduction mounting plates Our mounting plates for warning lights & switches are made from polished stainless steel. The lights & switches are easily installed as the holes are also the sleeves. The holes have a diameter of 1/2”, there are also holes in the top for mounting under the dashboard.

On-Off switch Please note to use relays from 50 watts onwards.

Lighting switchThree positions: off, side light & head light

Part nr.

083.084

Part nr.

135.755

Part nr.

135.756

Two hole mounting plate

Three hole mounting plate

Part nr.

083.088

Part nr.

083.159083.477086.187086.370

Description

Green lensRed lensAmber lensBlue lens

Warning lights

Part nr.

088.388

Lever Just snap of the existing lever with pliers and mount these lever over the existing metal pin with a good adhesive• 086.8996 piece lever set

Part nr.

088.089Part nr.

088.090

© V a n G e s t e l B & C 2 0 0 578

“Original Series” books and digital manuals

Description & contents Part nr

Supplementary Model & Service Information• Jaguar&Daimlermodels(excl.XJSaloons)-1930to1974 192.055• XJ6&XJ12Series1,2&3-1968to1992 192.056• XJS-1975to1996 192.057• XJ6(XJ40)&XJ12(XJ81)-1987to1994 192.058• XJ6(X300)&XJ12(X300)-1995to1997 192.059• XJ8&XJR-1998to2002 192.060• XK8&XKR-1997to2003 192.061

Parts & Service Bulletins• Volume1:parts1959to‘68,service1946to‘68 192.062• Volume2:parts1969to‘79,service1969to‘79 192.063• Volume3:parts1980to‘94,service1980to‘94 192.064

System Diagrams & Electrical Data• Volume1:Jaguar&SSSaloons-1933to1992(exceptXJ40) 192.065 JaguarSportscars-1948to1974&DaimlerVariants• Volume2:JaguarSportscars-1975to2004, 192.066 JaguarSaloons-1988to2002(exceptXJ12Series3)

Owners Literature• Volume1:Jaguar&SSSaloons-1933to1992(exceptXJ40) 192.067 JaguarSportscars-1948to1974&DaimlerVariants• Volume2:JaguarSportscars-1975to2004, 192.068 JaguarSaloons-1987to2002(exceptXJ12Series3)

Original Jaguar MKI, MKII(by Nigel Thorley)TheJaguarMKI,MKIIrangeencompassed2.4and3.4litreMark1saloons,2.4,3.4and3.8litreMark2,240and340,DaimlerV82.1.2litreandV8250,alldifficultandcostlycarstorestore,makingitessentialtogetitrightfirsttime.Hardback,295X225MM,96pageswith150colourpictures

Original Jaguar XK(by Philip Porter)Acompleteneweditionofabest-sellingbookfirstpublishedin1988.Newresearchhasgivenusmuchmoreknowledgeoftheseimmortalsportscars.EightXKexpertshavereaditandofferedadditions.Hardback,295X225MM,144pageswith250colourpictures

Original Jaguar XJ

(by Nigel Thorley)A detailed production history of the

6-cylinderandV12JaguarandDaimlerXJmodels.Theevolutionofthislargerangeisdescribed,withdetailsofdifferencesbetweenmodels,productionchanges,

etc..,andspeciallycommissionedcolourphotographs.Hardback,295X225MM,

128pageswith250colourpictures

Original Jaguar E-Type

(by Philip Porter)HereistheevidenceofwhatconstitutesanauthenticJaguarE-Type,whetherRoadster,coupéor2+2,fromearly3.8litretolate5.3litreV12,featuringtwelvecarseither

in remarkable original condition or restored withfastidiousattentiontooriginality.

Hardback,295X225MM,96pageswith160colourpictures

Part nr.

190.561

Part nr.

190.562Part nr.

190.560

Part nr.

190.540

Original edition publications

Description & contents Part nr

Parts & Service PublicationsJaguar Saloons 1936-1970• SSandJaguarSaloons-1936to1948 192.027• MKI&IIincl.240&340-1955to1969 192.028• MKX,420G,S-type&420-1961to1970 192.029

XJ Saloons 1969-1992• XJ6&DaimlerSovereignSeries1&2-1968to1979 192.030• XJ12&DaimlerDouble-sixSeries1&2-1972to1979 192.031• XJ6&DaimlerSovereignSeries3-1979to1987 192.032• XJ12&DaimlerDouble-sixSeries3-1979to1992 192.033

Jaguar sports cars 1948-1994 (except XJS)• XK120,140,150&150‘S’-1948to1961 192.034• E-typeSeries1&2-1961to1970 192.035• E-typeSeries3-1971to1974 192.036• XJ220-1991to1994 192.037

XJS sports cars 1975-1996• XJ-S5.3Litre-1975to1991 192.038• XJ-S3.6Litre-1982to1991 192.040• XJS4.0Litre-1991to1996 192.039• XJS6.0Litre-1992to1996 192.041• XJR(XJ40)&XJR-S(XJ-S)-1988to1993 192.042

XJ6 (XJ40) & XJ12 (XJ81) 1987 to 1994• XJ6(XJ40)2.9Litre-1987to1990 192.043• XJ6(XJ40)3.6Litre-1987to1989 192.044• XJ6(XJ40)3.2Litre-1991to1994 192.045• XJ6(XJ40)4.0Litre-1990to1994 192.046• XJ12(XJ81)6.0Litre-1993.25to1194 192.047

XJ6 (X300) & XJ12 (X300) 1995 to 1997• XJ6(X300)4.0Litre-1995to1997 192.048• XJ6(X300)3.2Litre-1995to1997 192.049• XJR(X300)4.0litreSupercharged-1995to1997 192.050• XJ12(X300)6.0Litre-1995to1997 192.051

Daimler Models 1953 to 1992• DaimlerV8:250andSP250(Dart)-1956to1969 192.052• DaimlerConquest,Century,Majestic& MajesticMajor-1953to1968 192.053• DamlerDS420Limousine-1968to1992 192.054

Thismarketleading,cost-effectiverangeofelectronicallypublishedtechnicalinformation-fewmanufacturersotherthanJaguarcomeclosetoprovidingtheownerwithsuchacomprehensiveback-catalogueofmanualsanddocuments- may be subdivided into three complementary subjectgroups: Parts and Service Publications, SupplementaryModel and Service Information and Parts and ServiceBulletins.Historically, significant amounts of valuable serviceinformationwereneverincorporatedintoupdatedservicemanuals, and only by also studying the supplementaryinformation and bulletin CDs can these information gaps bebridged.Oneexampleofthisisthenon-appearanceofthe AJ16 engine in XJS servicemanuals; another is thedividingoutofelectricalandelectronicinformationfortheincreasingly complex later models into guides publishedseparatelyfromtheservicemanuals.It is therefore highly recommended that owners seek toacquire CDs covering all three of the aforementionedsubjects to ensure they have as much information asnecessary to effectively service their Jaguar or Daimlermotorcar.

Jaguar Classic Parts CD Rom Range

79© V a n G e s t e l B & C 2 0 0 5

Factory workshop manuals

190.564 Jaguar XK 120, 140, 150, 150S & MK VII, VIII & IX Massive publication compiled from 9 different previous official manuals, Official service manual 784 pages, photos, drawings, wiring diagrams etc.., softbound 190.622 Jaguar MK II Official Service Manual 4th. edition covering all 2.4, 3.4, 3.8, 240 & 340 models, 545 pages, drawings, softbound

190.623 Jaguar MK X (3.8 & 4.2) and 420G Information on maintenance , repair and servicing procedure, Official service manual 364 pages, fully illustrated, softbound

190.624 Jaguar S-Type, 3.4, 3.8 Workshop Maual Repair and service procedures for all components, 280 pages, fully illustrated with drawings, softbound

190.625 Official Service Manual for Jaguar Automatic Part 1 covers original transmission as fitted to the MK VII model, with supplement Transmission covering changes to MK VII & other later models up to MK X, but in all essential details applies to other auto transmission units, i.e. 2.4, 3.4, 3.8, XK 140, XK 150, MK VIII & MK IX. 154 pages, photos etc.., softbound

190.626 Jaguar E-Type 3.8 & 4.2 Series 1 & 2 Huge combined volume covering all components in detail Official Service Manual Approx. 800pages, photos, drawings, softbound

190.627 Jaguar E-Type V12 Series 3 Official Service Manual Huge combined volume covering all components in detail Approx. 800pages, photos, drawings, softbound

190.628 Jaguar 420 Official Service Manual 200 pages, illustrated with photographs, charts & diagrams, softbound

190.629 Jaguar XJ6 Series 1, 2.8 & 4.2 litre Includes routine maintenance, spe’s and full repair and service procedures for all Official Service Manual components. 570 pages, photos, drawings, softbound

190.630 Jaguar XJ6 Series 2 Official Service Manual Information on maintenance, repair and servicing procedures 398 pages, illustrated with wiring diagrams, softbound

190.631 Jaguar XJ12 Series 1 Official Repair Operation Manual All repair and service procedures are covered in detail 450 pages, drawings, diagrams, softbound

190.632 Jaguar XJ12 Series 2 Official Repair Operation Manual Detailed specs., repair and maintenance instructions, 360 pages, drawings, softbound

190.633 Jaguar XJ6/XJ12 Series 3 Official Service Manual Maintenance and repair of all components, in immense detail 506 pages, drawings, softbound

190.634 Jaguar XJ6 (XJ40) Owners Workshop Manual Covers all 2.9, 3.2, 3.6, and 4.0 litre Jaguar & Daimler saloons from1986 to 1994 190 pages, fully comprehensive with over 280 ill., plus fold-out wiring diagrams & full specs. softbound

190.635 Jaguar XJ-S 3.6 & 4.0 Official Service Manual This manual covers all 6-cylinder powered XJS models - XJS 3.6, XJSC 3.6 and 4.0 The supplement covers later vehicles, mainly dealing with those modifications brought about in line with the introduction or automatic transmission, 4 litre engine and related systems, ABS brake systems, body modifications and more 648 pages with many illustrations, softbound

190.636 Jaguar XJS Official Repair Operation Manual Comprehensive instructions covering all components, with new 168 page 6.0 litre incorporating HE, 5.3 & 6.0 litre supplements. Softbound.

© V a n G e s t e l B & C 2 0 0 580

Factory parts catalogues

190.637 Jaguar Mark 2, 3.4, 3.8 & 340 All parts identified and numbered and many illustrated Official Spare Parts Catalogue 514 pages, drawings, hardbound

190.638 Jaguar S-Type Parts Catalogue Covers 3.4 & 3.8 models 248 pages, drawings, diagrams, softbound

190.639 Jaguar 3.8 E-Type Official Spare Parts Catalogue Covers 3.8 litre open and FHC models 334 pages, fully illustrated with drawings & diagrams, softbound

190.640 Jaguar E-Type Series 1, 4.2 litre 308 pages, drawings, diagrams, softbound Official Parts Catalogue

190.641 Jaguar E-Type Series 2 Official Parts Catalogue Covers Fixed Head Coupé, 2+2 models Contains illustrations from parts catalogue J37 & J38. 296 pages softbound

190.642 Jaguar E-Type V12 Series 3 Open 2 Seater All parts illustrated and numbered Official Parts Catalogue 240 pages, drawings, softbound

190.643 Jaguar XJ6 Series 1 Official Parts Catalogue 186 pages, exploded views etc.., softbound

190.644 Jaguar XJ6 Series 2 Official Parts Catalogue Approx. 400 pages with drawings etc.., softbound

190.406 Jaguar XJ6 & Daimler Sovereign Series 3 Covers models up to August 1985 inc. Daimler Sovereign Parts Catalogue 354 pages, many drawings, diagrams, softbound

190.472 Jaguar XJ12 Parts Catalogue 249 pages, factory drawings, softbound

190.645 Jaguar XJ6 (XJ40) Official Parts Catalogue Covers 2.9 & 3.6 litre saloons up to 1989 236 pages with many drawings, illustrations, diagrams, softbound

190.646 Jaguar XJ-S Range Official Parts Catalogue All parts numbered and identified with many illustrations Covers 6 cylinder 3.6 and 12 cylinder, 5.3 engines from Jan. 1987 to ‘91 316 pages with drawings, diagrams, softbound

81© V a n G e s t e l B & C 2 0 0 5

Factory owners handbooks

190.565 Jaguar XK120 Official Owners’ Handbook Controls and instruments, servicing, routine maintenance etc.. 72 pages with drawings, softbound

190.566 Jaguar XK140 Official Owners’ Handbook Operating maintenance and servicing instructions for open two-seater, fixed head coupé, drophead coupé. 72 pages with drawings, softbound

190.567 Jaguar XK150 Official Owners’ Handbook Operating maintenance and servicing instructions 84 pages with drawings, softbound

190.647 Jaguar MK II (3.4 litre) Official Handbook Operating maintenance and servicing instructions 86 pages, softbound

190.648 Jaguar MK II (3.8 litre) Official Handbook All info for operating, routine maintenance & service 84 pages with photos, drawings, softbound

190.649 Jaguar E-Type tuning & preparation for Official Jaguar booklet on how to improve performance for racing competition use 24 pages with illustrations, softbound

190.650 Jaguar E-Type 3.8 Official Owners’ Handbook Essential guidance on operating, routine maintenance & service 78 pages with drawings, softbound

190.651 Jaguar E-Type Series 1, 4.2 & 2+2 All information for the satisfactory operation, maintenance, servicing of these Official Handbook models. 81 pages with drawings, softbound

190.652 Jaguar E-Type 4.2 litre Series 2 Operating, maintenance, servicing Official Handbook 80 pages with drawings, softbound

190.653 Jaguar E-Type Series 3, V12 Provides all the information required for operation and maintenance Official Handbook 70 pages with drawings, softbound

190.654 Jaguar E-Type Series 3, V12 (US) (US) Operating instructions routine maintenance, service instructions, Official Owners’ Handbook North American specs. 100 pages with drawings, softbound

190.655 Jaguar XJ6 3.4 & 4.2 Series 2 Official Handbook Instructions for operating and maintenance (plus wiring diagrams) for the 4-door saloon. 62 pages, softbound

190.656 Jaguar XJ6C Series 2 Official Handbook General data, care and maintenance instructions for all components 62 pages (plus wiring diagrams), softbound

190.658 Jaguar XJ12 Series 3 Official Handbook Identification, specs all components, bodywork care, fuel consumption 70 pages with drawings

190.659 Jaguar XJ12 Series 3 Official Owners’ Handbook General information, controls, components, care of bodywork 64 pages with photos, hardbound

190.660 Jaguar XJS (US) Official Owners’ Handbook General data, instruments, operating, emission control, maintenance etc.. 60 pages with drawings, softbound

© V a n G e s t e l B & C 2 0 0 582

Haynes manuals & Tool catalogue

Part nr.

190.689

Part nr.

190.692

Part nr.

190.508

Part nr.

190.496

Part nr.

190.497 Jaguar XJ12, XJS & Sovereign Daimler Double Six

Jaguar XJ6 & Sovereign, service and repair manual, 1986-’94

Jaguar XJ6, XJ & Sovereign, Daimler Sovereign

1968-’86

Haynes ManualsThe clear, step-by-step illustrated instructions cover the dismantling, inspection, repair and refitting of

the engine, cooling system, fuel and emission control systems, exhaust, ignition system, clutch, manual gearbox, propeller shaft or drive shafts, braking system… These manuals are based on a complete

stripdown and rebuild. Manuals are hardback, 570 X 210 mm, B&W illustrations

Jaguar Saloons MKI, MKII 240 & 340

E-Type, 6 cylinders workshop manual Haynes

British parts, tools & accessories catalogueThis is THE catalogue for all “British Classic Car” owners. This full colour catalogue counting more than 130 pages is absolutely packed with parts and accessories: Screws, bolts and kits, fasteners, plugs, connectors, pipes, tubes, seals, clamps, filters, grommets, spanners, screwdrivers, pliers, engine tools, interiors, bodywork and electricity, lights & lamps, mirrors, badges, fuel caps and pumps, straps, safety belts, wipers, safety products, cleaning products, gloves, clothes, caps, helmets, oil and oil based products, steering wheels, wire wheels, spinners, hubs, stickers and lots more. It’s impossible to mention how much you will find in this catalogue so there’s only one thing to do: get one as quickly as possible from your Anglo-Parts dealer.

Part nr.

190.058

Haynes XJRestoration Manual(by Dave Pollard)An essiential reference for anyone considering a restoration of a XJ6. Covers series I, II, III from 1969 to 1986. Shows you how to repair, strip down, rebuild and tune your XJ. With tips on what to look for when buying a used XJ6. Hardback, 270 X 210 MM, 216 pages with 900 B&W illustrations.

Part nr.

190.727

83© V a n G e s t e l B & C 2 0 0 5

Jaguar MKI, II series & XJ series books....

Jaguar XJ, the complete companion

(by Nigel Thorley)Years of research and a lifetime’s experience of

owning and restoring the Jaguar XK have gone into this detailed study of Series 1, 2 and 3 XJ saloons

and coupes, from the first XJ6 built in 1968 to the last Serie 3 V12.

Paperback, 260 X 190 MM, 176 pages, many B&W and colour illustrations.

Part nr.

190.324

Jaguar MKI/II Haynes Great Car Series(by Nigel Thorley)

The Jaguar MKI/II is arguably the most famous and instantly recognisable saloon produced by Jaguar to date. Inside you will find

a well documented history of the car, incl. it’s extensive use by British Police forces and crooks alike. This beautifully produced book will appeal

to all fans of British cars as well as to Jaguar owners and enthusiasts. Hardback, 250 X 250 MM, 160 pages with 250 B&W and colour illustrations.

Part nr.

190.728

You & your Jaguar XJS, buying, enjoying, maintaining and modifying(by Nigel Thorley)The Jaguar XJ was one of the finest grand touring cars of its era. It survived the British Leyland days, Jaguar’s privatisation and the takeover by Ford and it was still very much in demand even before its replacement, the XK8, came on to the scene in 1996. This colour book, which covers the full road car and competition history, will fascinate all Jaguar enthusiasts. Hardback, 270 X 210 MM, 160 pages with 175 illustrations, mainly colour

Part nr.

190.605

You & your Jaguar XJ40, buying, enjoying, maintaining

and modifying(by Nigel Thorley)

The XJ40, mainstay of Jaguar production from 1986 to 1994, was the last saloon in which Sir William Lyons had

any style involvement. It broke new ground with it’s technical sophistication and reintroduced the marque to a younger

buying public. Today the XJ40 - more reliable and economic to buy and run - is an important ‘entry level’ model for first time

Jaguar buyers and has a large following. Hardback, 270 X 210 MM, 160 pages

with 175 illustrations, mainly colour

Part nr.

190.737

Jaguar MKI & II with 240, 340& Daimler derivatives (by James Tailor)The compact jaguars were unique cars, combining the sporting qualities for which Jaguar were renowned with the elegance and comfort of the larger saloons. This book tells the story, from their introduction in 1955 to their final demise in 1969. Incudes development, competition fortunes, full specifications and advice on buying.. Hardback, 250 X 195 MM, 198 pages with many B&W and colour illustrations.

Part nr.

190.722

S-Type 3.4 & 3.8Italian Workshop ManualLimited Stock

Part nr.

190.778

© V a n G e s t e l B & C 2 0 0 584

XK books & Jaguar buyer’s guide

Jaguar XK engine, history, rebuilding, uprating

(by Dave Pollard)The legendary 6-cylinder XK engine was fitted to Jaguars for around 30 years, incl. theMK VII, D-Type, E-Type and XK 150. Between the

mid- 1950s and mid- 1980s some 700.000 units were manufactured. It still ranks as one of the most famous British engines and has been used as the power plant in a number of ‘specials’ and kit cars. This fully illustrated

bookincludes the history of the engine, its applications on buying, rebuilding, and tuning from mild to race special. Hardback, 270 X 210

MM, 192 pages with 360 illustrations

Jaguar XK8, the authorised biography

(by Philip Porter)This is the full and exclusive story of the design,

development, engineering, testing and prodution of Jaguar’s XK8. Top Jaguar author, Philip Porter, had the

backing of the company and full access to drawings, records, photographs, cars and people involved of the birth of this milestone.Hardback, 280 X 210 MM, 136

pages with 180 colour illustrations

How to power tune Jaguar XK engines(by Des Hammill)All you need to know about getting maximum performance with reliability from the famous Jaguar XK 6-cylinder engine. A book packed with easily understood and down to earth advice based on the author’s many years on hands-on experience. Softback, 250 X 207 MM, 112 pages with c. 200 B&W pictures

Part nr.

190.586

Part nr.

190.607

Part nr.

190.597

Part nr.

190.563

The JaguarXKs(by Paul Skilleter)The Jaguar XK sports car continues to exert a very great appeal to enthusiasts in all countries, this book explains why the XK exerts this appeal and what it is really to own and run an XK. All the pictures in this book are from Jaguar’s own archives, except where otherwise credited. Softback, 237 X 180 MM, 186 pages with B&W illustrations

Part nr.

190.621

Essential Jaguar XK, XK 120/140/150The cars and their story 1949-’61 (by Mike Lawrence)Fifty years after their hasty development and launch, the XK’s remain stronger as ever. Covers succeeding models likethe C-Type, D-Type, XKS’s, analyzes their strenghts, shortcomings, and motorsport histories, as well as the practicality of owning an XK. Paperback, 260 X 210 MM, 80 pages with 60 colour & 60 B&W illustrations

Jaguar illustrated Buyer’s Guide(by Michael Cook)This new edition covers all models starting pre-WWII and continuing through the most current models. Includes specifications and production figures, value rating guide and investment information. Provides good history and identification of each vehicle.Paperback, 237 X 189 MM, 160 pages with 200 B&W illustrations

Part nr.

190.601

85© V a n G e s t e l B & C 2 0 0 5

E-Type books and CD’s

The E-type story, part I on CD-rom

(by Philip Porter)The Jaguar E-Type story is as exiting as the car itself, and

there are few cars more exiting than the E-Type. Still loved by millions, the E-Type made a unique impact in 1961,

becoming an icon of the swinging sixties, fast , beautiful, sexy, innovative,and affordable. On this CD-rom you

can watch period film and dramatic top gear video, view archive pictures and so much more. The E-Type story part I

traces the background and the story of the 3.8 E-Types.

Jaguar E-Type 3.8 & 4.2, 6-cylinder & 5.3 V12

(by Denis Jenkinson)This book contains not only an absorbing examination

of a very desirable automobile,but a fascinating glimpse into the design and manufacturing processes

of another era. A special colour section makes this book a handsome and thoroughly entertaining volume.

Paperback, 210 X 184 MM, 184 pages, 130 B&W and 24 colour illustrations

Jaguar E-Type(by Matthew L. Stone)Color history of Jaguars most loved car, the sexy and elegant E-Type. These coupes and convertables are as attractive today as they were when introduced in the 1960s. Jaguar E-Type covers all versions, Series 1, 1.1.2, 2, 3 and 2 + 2. Discusses E-Type roots in the XK Series, D-Type, XK-SS, etc., racing, technical evolution and company history. Includes sidebars on E-Types in movies and TV, driving impressions, vintage racing, Lister Jags and more. Historical B&W photography of Jags on the track and in factory promotional shots. With new photography of restored and original Jaguars. Paperback, 270 X 212 MM, 128 pages with 90 colour and 40 B&W illustrations

Jaguar E-Type, A celebration of the world’s favourite ‘60s icon

(by Nigel Thorley)This great car, the Jaguar E-Type, is produced from 1961-1974

and even today is instantly recognisable by people of all agesand is one of the best known icons of the 60s. Published to

coincide with the 40th anniversary of the E-Type that has been celebrated worldwide in 2001. Hardback, 250 X 250 MM,

160 pages with 250 B&W and colour illustrations.

Jaguar E-Type, A definitive history

(by Philip Porter, foreword by Briggs Cuningham)

The Jaguar E-Type is probably the most famous and certainly one of the best-loved sports cars of

all time. When it first appeared in 1961 it was seen as a giant step forward in design, offering

amazing performance with relative sophistication and all clothed in a sensational body of timeless

beauty. Now re-issued, this classic award-winning book is the result of an unrivalled

depth of research and presents a fascinating and comprehensive history of this great car.

Hardback, 270 X 210 MM, 712 pages with 700 illustrations incl. colour

E-Type: End of an Era(by Chris Harvey)This book has been re-issued to satisfy a continuing demand. It provides a wealth of technical information with a fully illustrated history, anecdotes, practical tips and compulsive reading in the form of contemporary and road testers’ reports. There is also advice on what to look for when buying an E-Type, its strengths & weaknesses, hints on restoration and on preparing a car for competition and fascinating information on the competition successes and the men behind the cars. Hardback 250 X 207 MM, 260 pages with 193 B&W and colour photographs

Part nr.

190.599

Part nr.

190.600

Part nr.

190.594

Part nr.

190.595

Part nr.

190.590

Part nr.

190.589

© V a n G e s t e l B & C 2 0 0 586

Jaguar history books

Jaguar, the complete

illustrated history(by Philip Porter)

This comprehensive history traces the development of the Jaguar company from its humble beginnings

through the latest XJ6 models and the radical change in its fortunes since the Ford takeover

and subsequent massive injection of capital. This distinctive large-format book is a classic work of

reference, describing and illustrating virtually every model produced. Hardback, 275 X 216 MM, 216

pages with 350 illustrations

Part nr.

190.591

Part nr.

190.598

Jaguar, the complete works(by Nigel Thorley)Detailed and illustrated profiles of all SS and Jaguar models from the 1931 SS1 to the latest Jaguar X-300 saloons, offering history descriptions, specs, performance data and production figures. All Jaguar-built Daimlers are also included. Hardback, 280 X 210 MM, 160 pages with 90 colour and 150 B&W illustrations

Jaguar, speed and style(by Martin Buckley)This book, beautifully styled like the big cats themselves, is a must-have purchase for all Jaguar enthusiasts. A brief historical overview followed by authoritative descriptions of the cars from the XK120 of 1948 to today’s S & X-types. With technical specifications, driving impressions and buying hints. An absolute feast of information. Hardback, 270 X 210 MM, 176 pages with 140 mainly colour illustrations.

Jaguar(by Nigel Thorley)Jaguar is one of the most distinguished and exciting car-makers in the world. This full pictorial history shows the company’s evolution from building motorcycle sidecars in the 1920s to producing the luxury saloons and sportcars of today. This book also covers Daimlers which were produced by Jaguar from 1960. Models featured include the XK 120, XK 150, the D-Type, the E-Type, the Mark 2, the XJ6 and the XK8. This popular account will be essential reading for Jaguar ownersand enthusiasts, and for all those with a keen interest in motoring history. Paperback, 244 X 172 MM, 160 pages with 250 B&W illustrations

Jaguar(by John Heilig)

This is a colourful overview of more than 50 years of Jaguar cars, with a focus on the most collectible and desirable cars

built after WWII. Jaguar books prove to be popular, not only for those fortunate enough to own these remarkable cars, but also for sports car enthusiasts who simply appreciate Jaguar’s exquisite styling and outstanding performance. Cars covered in this book include those built prior to WWII, the extremely

popular XK E-Type and XK Series cars, and the impressive new XK8, which has graced the covers of automotive magazines worldwide in the past year. Paperback, 230 X 230 MM, 96

pages with 80 colour illustrations

Part nr.

190.592

Part nr.

190.322

Part nr.

190.593

Sir William LyonsThe official biography(by Philip Porter & Paul Skilleter)This book describes Lyons’s early influences and how, while in his 30’s, he established a substantial motor manufacturing business. decades of glory followed by a period of dispair. By the time of his death in 1985 he knew that the company was on astrong path to recovery. Hardback, 234 X 156 MM, 296 pages with 86 illustrations.

Part nr.

190.733

JaguarAll the cars(by Nigel Thorley)This extensively researched guide provides exhaustive reference detail for all post-war Jaguar models. Information provided includes technical specifications, production cahnges, chassis numbers, production numbers, colour schemes etc. Each model is dealt with in a seperate chapter with clear tabular information. Hardback, 233 X 169 MM, 256 pages with 400 colour illustrations.

Part nr.

190.734

© A n g l o P a r t s n v 2 0 1 6 Q u a l i t y P a r t s & S e r v i c e

DOWNLOAD OUR OTHER ANGLO PARTS & ACCESSORIES CATALOGUES FOR FREE!d o w n l o a d t h e p d f v e r s i o n s o f o u r c a t a l o g u e s f o r f r e e a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .

Triumph TR2-4Apart n° 190.243

Triumph Spitfirepart n° 190.133

Triumph TR5-250-6part n° 190.273

Mini 1969-2000part n° 190.720

Morris Minorpart n° 190.718

Land Rover Defender 90-110 1984-2006

part n° 190.779

A.H. 100/4-3000part n° 190.509

Sprite-Midget 1965-’80 part n° 190.518

Sprite-Midget 1958-’64 part n° 190.504

Triumph GT6part n° 190.863

Jaguar XJ, Series I, II, IIIpart n° 190.780 British Parts, Tools & Accessories

part n° 190.058

Jaguar XK120-150part n° 190.694

Jaguar MKII-Daimler V8part n° 190.721

Jaguar E-typepart n° 190.695

MGTC part n° 190.275

MGTD-TF part n° 190.067

MGA part n° 190.001 MGB

part n° 190.002

MGCpart n° 190.158

MGF-TF 1996-2005part n° 190.519

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

S e c o n d E d i t i o n • 19 0 . 7 2 1 Q u a l i t y P a r t s & S e r v i c e

JAGUAR MKII - DAIMLER240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69PARTS & ACCESSORIES CATALOGUE