JASIC-600Java Automation System Integration Controller

JASIC-600 integration controllers provide open protocol interoperability options for ASI Controls systems supporting industry standard open protocols such as BACnet™, LonWorks™, Modbus, oBIX™, and more.

• 524 MHz PowerPC CPU

• 128MB Flash Memory

• 128MB RAM Memory, field-upgradeable to 256MB

• Two Ethernet ports

• RS-232, RS-485, USB ports

• Embedded Web Server for Graphical Front End

• QNX Real-time Operating System

• Optional Embedded Device Configuration Software

• Optional Software to Create Custom Animated 3D Graphics for User Interface

• Niagara Framework enables BACnet, LonWorks, oBIX, and Modbus Interoperability

All ASI Controls Java™ Automation System Integration Controllers (JASIC) include an embedded web server to provide an interactive system front end for an automation control network. The JASIC-600 can be accessed by remote Web browsers over a local Intranet, the Internet, or an optional GPRS Modem card. Workbench configuration software can be run in embedded mode or from a connected computer.

The JASIC-600 runs the industry standard Tridium Niagara Framework, with multiple open protocol integration options for control applications including building automation and energy management. Niagara Framework provides fully open interoperability and control. Mounting options include DIN rails or screw tabs on the base for panel mounting.

The JASIC-600 supports a wide range of field busses for connection to controllers and equipment. oBIX client/server drivers are included, and optional software drivers enable other protocols. Connecting with LonWorks requires optional communications cards. The controller comes with two Ethernet ports. ASI controllers on a BACnet-MS/TP network can be configured remotely using ASI Visual Expert software by tunneling through a JASIC-600 BACnet-IP interface.

The JASIC-600 provides a web-accessible user interface with animated 3D graphics. Optional Web Supervisor software archives trend data off the controller and presents a unified front end for networks with multiple JASIC controllers. An internal battery saves configuration database during brief outages and maintains the real-time clock up to one year.

DOC-1710 (2016-06-14) 2202 Camino Ramon, San Ramon, CA 94583 925 866-8808 moc.slortnocisa.www//:ptth

SpecificationsBase Device Specs PowerPC 440-series processor @524MHz 128MB DDR RAM & 128 MB Serial Flash Battery Backup Real-time clock

Power Supply Voltage: 15 VDC at 1 amp

OtherCommunications: RS-485 or RS-232 Construction: Plastic, din rail or screw mount chassis, plastic cover Cooling: Internal air convection Java VM: IBM J9 Java Virtual Machine OperatingSystem:QNX Real-time OS

Environmental Operating: 0° to 50°C (32°F to 122°F) Storage: 0° to 70°C (32°F to 158°F) RH: 5% to 95%, non-condensing

CertificationsUL 916 C-UL listed to Canadian Standards Association (CSA) C22.2 No. 205-M1983 “Signal Equipment” CEFCC part 15 Class A

Niagara AX and Niagara Framework are registered trademarks of Tridium Corporation BACnet is a registered trademark of ASHRAE LonWorks is a registered trademark of Echelon Corporation oBIX is a trademark of OASIS Java is a registered trademark of Sun Microsystems Inc. Internet Explorer is a trademark of Microsoft Corporation Firefox is a trademark of Mozilla Corporation

System Requirements Requires Niagara Framework 3.1 or higher. Graphical user interface requires Internet Explorer™ 6.0 or later, or Firefox™ 3.0 or later.

Controller Part #JASIC-600 controller with Workbench software and BACnet IP+MS/TP drivers

JASIC-600

JASIC-600 base controller, oBIX drivers JASIC-BAS6

Accessories Part #Wall module power supply JAWM-600RS-232 port adapter with 9 pin Dshell connector

JACC-R232

Dual-port RS-485 adapter; electrically isolated

JACC-D485

78 Kbps FTT10 A Lon Adapter JACC-LON Upgrade RAM memory to 256 MB JACC-U256

Software Part #JASIC Workbench embedded configuration software

JASIC-WRKB

JASIC Web Supervisor Small Edition JASIC- WSSEJAHU3D – create your own custom animated 3D AHU graphics

JGRF-AHU

JRTU3D – custom RTU JGRF-RTUJHP3D – custom Heat Pumps JGRF-HPMPJUnitary3D – custom Unitary JGRF-UNITJPlant3D – custom Central Plant JGRF-PLNTJMaker3D – create custom AHU, RTU, Unitary, and Central Plant

JGRF-MAKR

Protocol Drivers Part # BACnet-IP client JDRV-BNIPBACnet-MS/TP client JDRV-BNMSBACnet-IP server JDRV-BNSVModbus RTU client JDRV-MODBLonWorks client JDRV-LONW

* Consult ASI Controls for additional protocol drivers

DOC-1710 (2016-06-14) 2202 Camino Ramon, San Ramon, CA 94583 925 866-8808 moc.slortnocisa.www//:ptth

JASIC-600Java Automation System Integration Controller