Upload
asad-aijaz
View
220
Download
0
Embed Size (px)
Citation preview
8/10/2019 Jumbo Underground Drill Rig Model L2D Atlas Copco.pdf
1/4
Atlas Copco Technical specification
Boomer L2 D
Face drilling rigs
Hydraulically controlled mining and tunnelling face drilling rig withtwo BUT 35 booms. Available with a variety of rock drills to suitcustomer requirements.
Standard features
Rock drillCOP 1638, COP 1838 or COP 2238 rock drill withdual-damping system for optimal consumable lifePressurized housing and mating surfaces to reduce internalcontamination of the rock drill
Hydraulic boomBUT 35 heavy-duty boom with double tripod suspensionfor accurate hydraulic parallel holding in all directions
Hydraulic feedBMH 6000-series heavy-duty aluminium feed with highbending and torsional resistance for maximum durabilitySnap-on stainless steel sleeves and polymer contacts
Control systemHydraulically controlled drilling system which incorporatesthe anti-jamming function Rotation Pressure Controlled Feed(RPCF)
Carrier
Sturdy, articulated carrier with four-wheel drivePowered by a 4-cylinder, EPA III/COM III (Tier 3/Stage IIIA)approved diesel engineFour jacks for stable set up
GeneralFOPS-approved telescopic protective roofCable reelHydraulically driven compressorHydraulically driven water booster pumpWorking lights
Equipped with COP 1638, COP 1838 or COP 2238 rock drills
Coverage area up to 104 m2
L2
www.atlascopco.com
Illustration shows rig with optional equipment mounted.
8/10/2019 Jumbo Underground Drill Rig Model L2D Atlas Copco.pdf
2/4
Boomer L2 D
Specifications
Hydraulic pumps ..............2 separate units, one for each boom
Pumps unloaded at start
System pressure, max ....................................................250 bar
Hydraulic oil tank, volume max/min ........................ 250/200 l
Low oil level indicator
Oil temperature gauge on oil tank
Electrical oil flling pump
Oil flter indicator
Water cooled oil
Filtration ......................................................................... 16 m
Mineral hydraulic oil
Big hole drilling system
Hydraulic system
Boom
BUT 35Feed extension ......................................................... 1 800 mmBoom extension ....................................................... 1 600 mmParallel holding .........................................................completeFeed roll-over ...................................................................360
Max. lifting angle ....................................................+70/45Max. swinging angle ........................................................45Weight, boom only .....................................................2 900 kg
Air system
Hydraulically driven screw compressor ... Atlas Copco GAR 5
Capacity, max at 9 bar ......................................................26 l/s
Adjustable speed
Air pressure gaugeHole blowing kit with 80 l air receiver
Water system
Hydraulically driven water booster pump .....Flygt PXR1607H
Water booster pump max capacity at 15 bar ............. 250 l/min
Min water inlet pressure at 200 l/min, .............................2 bar
Water pressure gauge
Water ow guard
Carrier
Deutz 4-cylinder, TCD 2013 L04, EPA III/COM III (Tier 3/
Stage IIIA) approved 4-stroke prechamber diesel enginePower rating at 2 300 rpm ............................ 120 kW (160 hp)Torque at 1 600 rpm ....................................................618 NmArticulated steering .................................. 38 steering angleFixed seat for trammingFour-wheel driveHydrostatic power steering systemHydrodynamic transmission .................................Clark 24000Front axle ................................................................. Dana 114Rear axle .........................................Dana 114, 8 oscillationAutomatic differential lock on front axle, limited slipTyres .......................................................................14.00xR24Clearance outside axles ...............................19 front, 14 rearHydraulic jacks, front ......................................... 2 extendableHydraulic jacks, rear ..............................................................2
Service brakes .............................................2 separate circuitsEmergency and parking brakes .....................................SAHRFuel tank, volume ............................................................ 100 lExhaust catalyserSilencerElectric system .................................................................24 VBatteries ...........................................................2x12 V, 125 AhTramming lights ............ 6x40 W 24 V LED, 2x70 W halogenWorking lights ............................................ 4x35 W 24 V HIDBrake lightsIlluminated stairs for platform ....................................2x70 WFire extinguisherCentral lubrication systemSpirit level ...................one for longitudinal, one for sidewaysGradeability at max. load on drive wheels ......................... 1:4
Horn, beacon and reverse alarmShelf for drill bits and tools
ROCK DRILL
COP 1638 COP 1838 COP 2238
Shank adapter R32/R38/T38 R32/R38/T38 R32/R38/T38
Height over drill centre 88 mm 88 mm 88 mm
Length without shank 1 008 mm 1 008 mm 1 008 mm
Impact power 16 kW 18 kW 22 kW
Impact rate 60 Hz 60 Hz 73 HzHydraulic pressure 200 bar 230 bar 250 bar
Rotation system Separate rotation Separate rotation Separate rotation
Rotation speed 0340 rpm 0340 rpm 0340 rpm
Rotation torque, max 640 Nm 640 Nm 640 Nm
Lub. air consump. at 2 bar 6 l/s 6 l/s 6 l/s
Water consumption 1.1 l/s 1.1 l/s 1.1 l/s
Weight 170 kg 170 kg 170 kg
Sound level
8/10/2019 Jumbo Underground Drill Rig Model L2D Atlas Copco.pdf
3/4
Boomer L2 D
Specifications
Optional equipment
Rock drill/Drilling systemAir-water mist ushing
external air and water supply, oil cooled by water-external air and water supply, oil cooled by air fan-internal air and water supply, oil cooled by water-internal air and water supply, oil cooled by air fan-
Hole blowing kitHole blowing kit with external air supply
FeedTelescopic feed BMHT 6000-series (max 18 ft)Extension drilling set BSH 110 (BMH feeds only)Feed prepared for RASRod Adding System, RASWater spraying kit on cradle
BoomFeed angle measurement system, FAM 1Feed angle measurement system with hole depth measure-ment, FAM 2Automatic boom lubrication kit, rear part of boom
Protective roofManual spotlight, left and/or right
CabinFOPS-approved cabin, noise level
8/10/2019 Jumbo Underground Drill Rig Model L2D Atlas Copco.pdf
4/4
Boomer L2 D
98512
586
01a
09/2010
C
opyright2008
,Atlas
CopcoRockDrillsAB
,rebro,
Sweden.
AllproductnamesinthispublicationaretrademarksofAtlasCopco.
Anyunauthorizeduseorcop
yingofthecontentsoranypartthereofisprohibited
.
Illustrationsandphotos
inthisbrochuremayshowequipmentwithoptionalextras.
Specificationsandequipmentaresubjecttochangewithoutnotice.
ConsultyourAtlasCopcoCustomerCenterforspecificinformation.
Measurements
COVERAGE AREA
SIDE VIEW
DIMENSIONS
mm Width 2 550
Height with cabin 3 126
Height roof up/down 3 091/2 375
Length with BMH 6814 feeds 14 169
Ground clearance 290
Turning radius outer/inner 8 200/4 800
WEIGHT
gross weight, depending on configuration
kg Total, min/max 27 000/33 000 kg
Boom side, min/max 20 000/24 000 kg
Engine side, min/max 7 000/9 000 kg
TRAMMING SPEED
km/h On flat ground (rolling resistance 0.05) >14
On incline 1:8 > 6
RECOMMENDED CABLE SIZE AND LENGTH
Voltage Type Dimension, mm2 Diameter,
mm
Length,
m
380400 VH07RN-F 4X150 67 60
Buflex 3x185+3G35 56 90
440500 VH07RN-F 4X120 60 75
Buflex 3x150+3G25 52 100
550 VH07RN-F 4X95 55 90
Buflex 3x120+3G25 46 135
660690VH07RN-F 4X70 49 110
Buflex 3x95+3G16 45 155
1 000 VH07RN-F N/A N/A N/A
Buflex 3x50+3G10 33 200
Recommendations are given for surrounding temperature of 40 C and up to a height of 2 000 m.
Illustration shows rig with optional equipment mounted.
L2
www.atlascopco.com
14169
2911
3091
23
75
2025
1800 2200806 925
10854000
82
50
86
50
89
00
93
00
200
1 900
1 312
3 035
2175
11 750
12 400
12 800
13 400