Klingspor's Woodworking Shop Vol 122 Catalog

2009 No. 122 • $2.00

www.woodworkingshop.com • 800-228-0000

KKLLIINN

GGSSPP

OORR’’

SSWW

OOOODDWWOORRKKIINNGG SSHHOOPP ~~ 2200 YYEEAARR AANNNNIIVVEERRSSAARRYY

TABLE OFCONTENTS

ABRASIVE ACCESSORIES ..............10BARGAIN BOXES ................................3BELT SANDING ....................................6BLADES................................................36BOOKS ................................................29BUFFING & POLISHING ....................15CARVING ............................................56CLAMPS ..............................................88CONTOUR SANDING

& SHAPING ........................................4DETAIL SANDING ..............................75DISC SANDING ..................................46DRILLING ............................................39DRUM SANDERS................................66DUST COLLECTION ..........................78FEIN TOOLS ........................................77FINISHING ..........................................16FLOOR SANDING ..............................80FOAM SANDING ................................69GLUE ....................................................85HARDWARE ........................................80MACHINE ACCESSORIES ................42MEASURING & LAYOUT....................30METAL AND TOOL

PROTECTANTS................................43ORDER FORM ....................................90PEN BLANKS ......................................55POWER GRINDING............................63PUMP DRUMS ....................................14ROLLS ..................................................67ROUTING ............................................32SAFETY................................................64SANDERS............................................72SCRAPERS/PLANES ........................89SHARPENING ....................................59SHEET SANDING ..............................12SHOP HELPERS ................................81SLEEVE SANDING ............................70TABLE SAW HELPERS ......................44TURNING ............................................53

SEE PAGE 91 FOR COMPLETE INDEX

Dear Fellow Woodworker,As our summer draws to an end, kids go back to school and we once again settle into ourwork schedules, we need to think about our own well-being – and that means taking time towind down and enjoy our woodworking! There is enough stress in our everyday lives andrelaxing by using our hands and creating something is the perfect way to relieve this stress.So sit back and take some time to check our new Klingspor’s Woodworking Shop catalog andall of the new items we have to offer. There’s sure to be something in your area of expertisethat you’ll find interesting and most of all, necessary. Thanks for shopping with Klingspor’sWoodworking Shop!

Happy Woodworking!

Christoph Klingspor, President

P.S. Be sure to look closely at the NEW Tool Zone Multi-Tool below!

2

The bargains seem to never end at Klingspor’s Woodworking Shop.Make our loss your gain with the Bargain Box of Sheets. Our otherBargain Boxes have supplied top quality sandpaper in various dif-

ferent forms to woodworkers across the country formany years. Now with this sheets bargain box,

you’ve got something else to be excited about.We’re packing this box full of 5 pounds of our

very best and heaviest weight paper materialscut into useable sizes of no less than 4-1/2"in length and width. That means each piece

is perfect for simply sanding with your hand, sandingwith a hand block or even on a sheet sander. Also, as youknow, you rarely will do any hand sanding in grits coarserthan 100. So we’re loading up the box with a nice randomassortment of grits that will range from medium to fine - not

to exceed 400 grit– a tremendous variety to accomplish most of your final sanding needs. Try the latest,greatest Bargain Box from Klingspor’s Woodworking Shop Catalog today!

BARGAIN BOX OF HEAVYWEIGHT PAPER SHEETS #BB45110..........................$15.95

The new Tool Zone Multi-Tool delivers 11,000 oscilla-tions per minute to handle a wide variety of jobsaround the shop and around the home. Perfect forremodeling and repair jobs like tile cutting and repair,removing caulking and grout, replacing windows, andperfect too for your special woodworking needs.Sand into tight corners and hard-to-reach areas withthe supplied triangular sanding pad and use the cut-ting blades for small trim work and for hobby work.This is your opportunity to have the multi-tool withaccessories you’ve always wanted all at a new afford-able price.

• Comes with 4 different attachments: triangularsanding pad, slitting (half moon) saw blade, circularsaw blade, and scraper blade. Includes hex key forfast accessory changeout.• Die cast aluminum gear housing• Sealed bearings for long life

Rated Voltage: 120v; Rated Frequency: 60Hz;Rated Input Power: 180w

TOOL ZONE MULTI-TOOL#TZ30000 ..........................................$59.95

Bargain Box of Sheets

Tool Zone Multi-Tool

24 HOUR TOLL FREE ORDERING 1-800-228-0000

Would you like to get up to $100 worth ofSanding Power for only $1995? How about upto $200 worth of Sanding Power for only $3495?

THE FAMOUS KLINGSPOR

Bargain Box

10 LB COARSE / MEDIUM / FINE #BB00010............................$19.9510 LB MEDIUM / FINE #BB00095............................$19.9520 LB COARSE/MEDIUM / FINE#BB00006 ..........................$34.95

10 LB.COARSE/MED./FINE

#BB00010

$1995

20 LB.COARSE/MED./FINE

#BB00006

$3495Then look no further than KLINGSPOR’S WOODWORKING SHOP Bargain Boxes!Like thousands of our customers across the country, you’ll never need anothersource for sanding products once you’ve purchased a Bargain Box.

Why has this simple idea become so famous? Because there’s not a better sandpaper deal any-where - plain and simple! Plus, woodworkers all around the world are realizing that this amountof sandpaper is virtually priceless in the shop. Imagine never having to dig through yourshop to find the perfect piece of sandpaper - you’ll have a box loadedwith all usable pieces. The best part is that these are our premi-um products that are meant for the rigors of industrial use. Thatmeans you’re not only getting plenty of sandpaper, you’re gettingthe best sandpaper available on the market today. You’ll find somany uses for this stuff – hand sanding, disc making, etc.

So what are you getting?…….10 pounds or 20 pounds of assortedsandpaper pieces. Each is of a generous size so it’s all usable. Withthe 10lb box you can choose equal amounts of coarse, medium andfine (CMF) grits or just medium and fine (MF) grits while the 20lbbox is only offered in equal amounts of coarse, medi-um and fine (CMF) grits. Klingspor’s 10lb boxis the deal that you’ve always wanted butfor only $15 more, you can have 20 poundsof the world’s best sandpaper.

WHERE DO WE GET THIS STUFF?Our long-standing relationship withKLINGSPOR Abrasives, makes it possi-ble to get our hands on excess materi-als that can’t be used in their automat-ed manufacturing process. This is thesame product that is used by some ofthe world’s largest furniture manufac-turers - true industrial grade!

ORDER ONLINE: www.woodworkingshop.com

3

BARGAIN BOX

4


CONTOUR SANDING & SHAPINGSpindle-MountedFinishing FlapwheelsFinishing Flapwheels For Small Parts

Sand-O-FlexProfile Sander

REPLACEMENT SANDPAPER:80 Grit #MA8000......$10.95100 Grit #MA1000......$10.95120 Grit #MA1200......$10.95150 Grit #MA1500......$10.95180 Grit #MA1800......$10.95240 Grit #MA2400......$10.95320 Grit #MA3200......$10.95

Adapter for 1/4" to 1/2" use#MA11055......................$7.95

Perfect for sanding contours, profiles andcarved parts, the Sand-O-Flex wheel is aquick fix for these sanding problems. Theabrasive flaps are backed by brushes thathelp to push the sandpaper into the desiredsurface shape. The slashed abrasive worksgreat on more severe profiles and contoursor for flat surfaces and minor contours. Thereplacement sandpaper is held convenientlyin the center core of the wheel so when youneed to “freshen” your sandpaper, simplypull it out of the core and cut off the old ends.

Maximum rpm-2400

Turnings, carv-ings, chair armsand legs, ballis-ters and othershaped and con-toured parts canbe sanded easi-er, better andfaster whenusing our Mac

Mop.KLINGSPOR’s Mac Mop is an exclu-sive of Klingspor’s Woodworking Shopand consists of hundreds of strips of flexi-ble sandpaper that are bonded to a strongepoxy core.These small strips quickly findtheir way into all the recesses that yourpiece may have. Due to the nature anddesign of the Mac Mop, the sanding actionis very passive and will sand, polish and

defuzz your work without effecting or alter-ing any of the profiles. The Mac Mop willdefinitely improve the finishing stages ofyour project by sanding off all of the loosefibers that have been pressed into thewood during previous sanding applica-tions.This will in turn make for a smootherfirst coat of finish to build on. Simply con-sider this the best profile sanding deviceon the market today.Mac Mops should be mounted onto sta-tionary machines with motors rangingfrom 1/2 hp to 3 hp and shaft diameters ofat least 1/2" in diameter. Ideal speeds forthe Mac Mop are between 1100 and 2500rpm but should never exceed 3400 rpm.

Mac Mop Finishing Contours and Profiles Shouldn't Be a Hassle.

These must be used with the mountingplates which are included in the price ofthe wheel. Please specify a bore size.

Mounting Plates for 10" Mac Mop

MP97314 ..........................1/2" MP97316 .......................... 5/8" MP97317 .......................... 3/4" MP97318 ..........................7/8"

MP97319 ............................1"MP07737 ..........................11/8" MP97321 ..........................11/4"MP97322 ..........................11/2"

SAND-O-FLEX WHEEL#MA35000....................$32.95Replacement Brushes#MA130........................$12.95

We haven’t placed much emphasis on these versatile products,but the number of uses expand constantly. With a 1/4" spin-dle, they will fit most tools with a 1/4" chuck-drill press,hand-held drills. Bowl turners will appreciate theseimmediately. When you’ve got small concave or convexsurfaces to sand, remember Spindle MountedFlapwheels from Klingspor’s Woodworking Shop.

1/4" Spindle Mounted Flapwheels

Spindle Mounted Flapwheels

Great forgrinding &polishing

metal!

2"x 1" 4"x 13/4"Max RPM 12,000 6,000

240 Grit FW98073 FW98075$8.95 13.95

150 Grit FW98070 FW98072$8.95 13.95

100 Grit FW98067 FW98069$8.95 13.95

60 Grit FW98064 FW98066$8.95 13.95

23/8"x2"x1/4" 31/8"x2"x1/4"Max RPM 3,700 3,700150 Grit FW94810 FW94835

$10.95 12.9580 Grit FW94800 FW94831

$10.95 12.95

Dia x Width 10" x 2" 10" x 4"Max RPM 3,400 3,400180 Grit MM00518 MM00519

$89.95 149.95120 Grit MM00514 MM00515

$89.95 149.9580 Grit MM00510 MM00511

$89.95 149.95

Our finishing flapwheels will put a glass-smooth finish on most small parts and inter-nal or external portions of turned bowls.Whether finishing flat, rounded or slightly

contoured parts, you’ve never seen amore delicate sanding tool. Intermixed

with abrasive flaps are flaps of nonwovennylon with fine grits impregnated in them.These nylon flaps make the wheel softer

while also making it less aggressive.Remember, these are for finishing only andeach grit will act finer than it really is. Example:a 100 grit will act like a 150 or 180 grit. Usewith any 1/4" tool. Try one of these when youneed that perfectly smooth finish.

Mounting plates bought without Mac Mop ........................$4.95 per pair

Finish Sanding FlapwheelThese spindle-mounted wheels are made with our top-of-the-line non-woven abrasivematerial. They are perfect for light sanding between coats of finishes or for burnishingbare wood.

BORE BORE

1" x 1/4" 2" x 1/4"Max RPM 4,200 4,200

240 Grit MM07104 MM07204$29.95 39.95

180 Grit MM07103 MM07203$29.95 39.95

120 Grit MM07102 MM07202$29.95 39.95

80 Grit MM07101 MM07201$29.95 39.95

7" Spindle-MountedContourSanding Mops

With these sanding mops, you cansand the most severe shapes andprofiles with ease. Best of all, youdon’t need any fancy equipment touse them – any 1/4" toolwill work. Thousandsof abrasive “fin-gers” find theirway into hard-to-reach nooks andcrannies to givethe best possiblesanded finish.Simply chuck intoyour 1/4" drill andyou’re ready to go.

1"x 1/2" 1"x 1" 2"x 1" 3"x 1"Max RPM 22,900 22,900 13,700 8,500180 Grit FW97627 FW97631 FW97644 FW97655

3.95 4.25 5.75 6.95120 Grit FW97551 FW97555 FW97569 FW97583

3.95 4.25 5.75 6.9580 Grit FW97469 FW97473 FW97488 FW97503

3.95 4.25 5.75 6.9560 Grit FW97423 FW97427 FW97440 FW97456

$3.95 4.25 5.75 6.95

SHOP ONLINE FOR OUR FULL LINE OF PRODUCTSWWW.WOODWORKINGSHOP.COM

5

CONTOUR SANDING & SHAPING


Angle GrinderFlapwheelHere’s a new twist on the same old flap-wheel design.This flapwheel allows youto sand, shape, and finish with the faceof the wheel - a first in the industry! Thecenter hole is threaded and simplyspins onto your 41/2" angle grinder.

120 Grit 80 Grit 60 Grit 40 GritITEM# MD61504 MD61503 MD61502 MD61501

$16.95 16.95 16.95 16.95

This product is a great addition to woodwork-ing shops and hobbyist tool boxes alike.Whether you are a carver needing to touchup small relief carvings or a metalworkerneeding to sand and polish in tiny places,these mini mops are the perfect answer.Made from KLINGSPOR’S GOLD flexiblesanding material, these mops can be usedon all Dremel, Proxxon, and Foredom typetools.

Sanding Mop Refill - 48 Pack

Many customers call and ask "How do Isand a profile without changing the shape?"Well, our Sanding Mop Kit is the answer.Askwoodworkers from across the country andthey will tell you that this is the very best con-tour sanding system on the market today.We have taken our most flexible aluminumoxide cloth , added lubricants and specialresins and made the ideal product for profilesanding.You'll be amazed at the time you willsave and the finish in which you canachieve. Set up of the mops is simple. Wehave also added the widest selection ofmandrels in the woodworking market so thatyou can build that perfect sanding mop foryour specific profile sanding needs. Buildyour mops to the width and flexibility of yourchoice by adding or taking away sleeves.This is a must have for all woodworking

shops, get your KLINGSPOR GOLDSanding Mop Kits today.

1/2" Mandrel for 1/2" Motor Arbor#CL10013......................... $7.951/2" Mandrel for 5/8" Motor Arbor#CL10014 ..........................$7.95Mandrel for 1" x 4" Sanding Mop#CL10000 ..........................$6.95Mandrel for 2" x 6" Sanding Mop#CL10015 ..........................$8.95Extra Long Mandrel for 2" x 6"Sanding Mop for Double Stacks#CL10012 ..........................$9.951/2" Capacity - Keyless ChuckArbor #CL10009..............$19.95

Design Your Own Sanding Tools - SANDING MOP ACCESSORIES

REFILLS1" 1.5" 2"

5 Pack 4 Pack 3 Pack

320 Grit MI10320 MI15320 MI20320$9.95 9.95 9.95

220 Grit MI10220 MI15220 MI20220$9.95 9.95 9.95

120 Grit MI10120 MI15120 MI20120$9.95 9.95 9.95

1" x 4" 2" x 6"

320 Grit FS32320 FS36320$19.95 29.95

220 Grit FS32220 FS36220$19.95 29.95

180 Grit FS32180 FS36180$19.95 29.95

120 Grit FS32120 FS36120$19.95 29.95

80 Grit FS32080 FS36080$19.95 29.95

KLINGSPOR GOLD Mini MopsSanding and Touch-up Tools in Miniature Form

KLINGSPOR GOLDSanding Mops Fast, Effective Affordable Profile Sanding

Double Sanding Mop Shown*

*Double Sanding MopBuild your own Double Sanding Mop with 2 refill packs of 2" x 6" sanding mops and anExtra long mandrel for 6" mop (CL10012). As pictured above, once this unit is brokenin, you will not find a better solution for sanding contours in cabinet doors, chair legs,carvings, and large hard to reach areas anywhere in the industry.

NEW LOWER PRICESANDING STAR 1/4" SHANK80 GRIT #DY93166................$10.95120 GRIT #DY93167................$10.95180 GRIT #DY93169................$10.95220 GRIT #DY93171................$10.95

Everyone knows how useful a wood raspcan be around the shop. They are a greatway to remove clear out wood in a hurry.You can shape, shave and carve wood inseconds. The Microplane brand of rasp isa very unique tool to the wood workingmarket. Made of hardened steel, themicroplane cuts an amazing 10 timesfaster than similar products. The patenteddesign of the Microplane creates anextremely sharp edge that cuts immedi-ately instead of scraping, tearing or goug-ing. The non-clogging teeth act as perfect-ly sharpened planes that cut instantly andalmost effortlessly, even through rockmaple! These very inexpensive tools willbecome your most practical and versatiletools in your shop.

SNAP IN HANDLE 3"#GP32016............................$8.95 COARSE ROUND BLADE 3"#GP32018 ..........................$6.95COARSE ANGLE BLADE 3"#GP32019............................$6.95

FINE FLAT BLADE 3"#GP32020............................$6.95FINE ROUND BLADE 3"#GP32021............................$6.95FINE ANGLE BLADE 3"#GP32022............................$6.95

Microplane ShapesShape, Shave and Carve In Seconds

1" MINI MOP KIT#MI10000 ..........$17.951.5" MINI MOP KIT#MI15000 ........ $17.95

2" MINI MOP KIT#MI20000 ..........$18.951/8 x 1/8 Screw Type Mandrel#CL10010............$4.95

Sanding Stars Don’t feel like making your own Sanding Mops?Buy our Sanding Stars – mounted on a 1/4" spindle for your convenience.

MICROPLANEROUND LG #GP30011 ....$12.95SQUARE LG #GP30012 ....$12.95ROUND SM #GP30018 ......$8.95SQUARE SM #GP30019 ......$8.95

Kits include a mandrel and two of each grit:

Sanding belts - often times it’s hard to justify the costsinvolved, but we all know the benefits of beltsanding...so what do you do? Put up with the highprices of “hobby grade” belts offered by most of thecompanies out there? We think not! KLINGSPOR’sBox of Belts is the answer.

Since we’re a manufacturer of industrial quality abra-sives, and are making these belts on a daily basis forheavy industry, we’re able to offer you overruns andexcesses. In this instance, our loss is your gain! Someof the largest manufacturers in the world use these verymaterials in their production operations. So you too cannow benefit from using the ultimate in industrial materi-als and SAVE MONEY in the process. If you’ve neverused REAL industrial belts, then you don’t know whatyou’re missing. Even a casual user will realize the

advantages of the material. In addition to the top-quali-ty, you’ll be getting the very best prices in the business- no other company can beat the price per belt -none!!This is your chance to build your very own box of beltsin the grits you really want and need.

So, take your time, pick 6 grits (you’ll get a 6 pack ofeach grit) and know that you’re getting the best dealpossible on the best belts in the industry. Pleaseremember that the 4" wide belts are packaged 5 beltsper grit pack.That’s a total of 30 belts for only $29! Justpick any six item numbers from your size group andyou’re in business! So, if you’re a die-hard belt sanderuser, and you haven’t tried the Box of Belts, you’re in fora real treat!

Includes: 60, 80, 100, 120, 150, & 180 grits

DON’T DELAYOrder your Box of Belts today. Choose from six popular sizes:

320 240 220 180 150 120 100 80 60 50 40 36Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

21/2" x 16" BZRD68602 BZRD68600 BZRD68599 BZRD68598 BZRD68597 BZRD68596 BZRD68595 BZRD68594 BZRD68593 BZRD68592 BZRD68591 BZRD68436

3"x 18" BZRD68615 BZRD68613 BZRD68612 BZRD68611 BZRD68610 BZRD68609 BZRD68608 BZRD68607 BZRD68606 BZRD68605 BZRD68604 BZRD68603



4" x 21" BZRD68655 BZRD68653 BZRD68652 BZRD68651 BZRD68650 BZRD68649 BZRD68648 BZRD68647 BZRD68646 BZRD68645 BZRD68644 BZRD68643

4" x 24" BZRD68730 BZRD68667 BZRD68666 BZRD68665 BZRD68664 BZRD68662 BZRD68661 BZRD68660 BZRD68659 BZRD68658 BZRD68657 BZRD68656

EXTRA FINE FINE MEDIUM COARSE X-COARSE

Sizes21/2" x 16"3" x 18"3" x 21"3" x 24"4" x 21"4" x 24"

Quantity363636363030

Item #’sBZRD21600BZRD31800BZRD32100BZRD32400BZRD42100BZRD42400

Combo Box of Belts

$290036 Belts For Only

KLINGSPOR’sFamous Box of Belts

Build Your Own!!

COMBO INCLUDES: 1 PACK EACH OF 60, 80, 100,120, 150, 180 GRITS.

MINI BOXOF BELTS

Choose Three Belt Packs(3"-18 Belts, 4"-15 Belts)

$1995

6


BELT SANDING

BELT SANDING


With this Classic abrasive belt material from KLINGSPOR, you’llrealize excellent sanding performance paired with an outstandingprice point. Together, these equal “The Most Sanding Power forYour Money!”

Made from premium aluminum oxide grains, resin bonded to acloth backing, you’ll find that this classic material outlasts mostcompanies’ premium belt materials! This cloth backing is morepliable than our premium belt backings, making it perfect for usein the majority of your sanding applications. Additionally, we’vemade this product with an open coat grain structure that helps todecrease the loading that often occurs when sanding soft orresinous woods. Overall, you’ll be receiving a belt that’s of con-sistent quality each and every time that’s perfect for everydayportable belt sanding.

20 Belt Assortment Includes:40 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit

1 1 3 5 2 5 3

Stock up on these quality belts packaged in convenient quantities of 10 or the value priced 20-BeltAssortment that includes the following pre-packaged grits:

Economy Belts available only in the sizes listed above.

We custom-make belts to fit your sander. It doesn’t matter, you make the call, any size! Here comes the best part—we makethese belts out of our premium belt material for extra long life and outstanding overall finishes.You get what you want each andevery time. To calculate your belt cost, simply multiply the list price figure according to grit by the length of the belt. Then addthe charge for joining.Our customer service personnel will gladly help you with this calculation, if necessary. Formula: Selectgrit price, multiply by the length of belt, add the joining fee = your per belt cost. Intermediate sizes usenext higher price.

Custom Size Sander Belts Now more sizes to choose from!

Price Per Belt 16"x 48" 25"x 60" 36"x 60" 37"x 75"

220 Grit WB41157 WB48535 WB48568 WB48600$18.95 $27.95 $38.95 $46.95

180 Grit WB34119 WB64126 WB64152 WB64180$18.95 $27.95 $38.95 $46.95

150 Grit WB41158 WB63256 WB63301 WB63340$18.95 $27.95 $38.95 $46.95

120 Grit WB34118 WB61817 WB61892 WB61942$18.95 $27.95 $38.95 $46.95

100 Grit WB51410 WB59351 WB59423 WB59467$18.95 $27.95 $38.95 $46.95

80 Grit WB39851 WB56577 WB56676 WB56724$20.45 $28.45 $39.95 $47.95

60 Grit WB43419 WB53942 WB54012 WB54040$20.95 $30.45 $40.95 $48.95

Wide Belts Use The Same Belts AsThe Large Furniture Manufacturers!

KLINGSPOR wide belts are made daily for our large furnituremanufacturing customers.This product consists of a heavy-duty clothbacking, our premium aluminum oxide grains and heat resistant resins.Thegrains are applied in an open coat form to reduce loading and extend cut-ting life. For any wide belt application, KLINGSPOR wide belts will outper-form and outlast any competitor’s belts.

1"x 30" 1"x 42" 3" x 21" 4" x 24" 4" x 36" 6" x 48"

20 BELT EB00071 EB99064 EB99063 EB99072 EB99073 EB99074ASSORT $18.95 $19.95 $24.95 $37.95 $48.95 $89.95150 Grit EB21117 EB21118 EB21122 EB21127 EB21128 EB21130

$11.95 12.95 13.95 18.95 27.95 53.95120 Grit EB19858 EB19860 EB19872 EB19884 EB19886 EB19894






$11.95 12.95 13.95 18.95 27.95 53.95

Price Per 10 Pack

WIDTH: 1/4" - 1" 11/4" - 2" 21/4" - 3" 31/4" - 4" 41/4" - 5" 51/4" - 6" 61/4" - 7" 71/4" - 8" 81/4" - 9"

100 Grit & Finer $0.0191 0.0366 0.0538 0.0713 0.0905 0.1190 0.1351 0.1573 0.179980 Grit $0.0198 0.0385 0.0566 0.0756 0.0960 0.1199 0.1431 0.1664 0.189960 Grit $0.0217 0.0417 0.0619 0.0818 0.1038 0.1298 0.1549 0.1805 0.205950 Grit $0.0230 0.0444 0.0659 0.0877 0.1114 0.1386 0.1657 0.1932 0.2203 40 Grit $0.0246 0.0474 0.0705 0.0934 0.1187 0.1486 0.1775 0.2069 0.2360 36 Grit $0.0264 0.0510 0.0758 0.1007 0.1279 0.1598 0.1910 0.2228 0.2543 24 Grit $0.0298 0.0584 0.0869 0.1154 0.1466 0.1825 0.2182 0.2543 0.2905 Joining Fee $1.75 $2.15 $2.49 $3.25 $4.10 $4.79 $5.49 $6.35 $7.15

BEST DEAL

7

Klingspor Classic Portable BeltsPerformance That’s Easy On The Wallet

8


BELT SANDING

Premium Belts for Standard Size MachinesUnprecedented Life and ConsistencyWe use only the best cloth materials to give you superior strength and premium tear resistance.

Price Per Belt 1"x 30" 1"x 42" 3" x 21" 3" x 24" 4" x 24" 4" x 36" 6" x 48" 6" x 80" 6" x 89"

320 Grit PB49726 PB49731 PB49847 PB49850 PB49902 SB49906 SB50000 ST50010 ST50013$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95











1"x 30" 1"x 42" 3" x 21" 3" x 24" 4" x 24" 4" x 36" 6" x 48"

80 Grit PL89027 PL89031 PL89180 PL89184 PL89248 PL89253 PL89550$1.93 2.22 2.61 2.79 4.55 5.50 9.72






ASSORTMENT PL00130 PL00142 PL00321 PL00324 PL00424 PL00436 PL006481 of each grit $9.65 10.96 13.14 14.16 22.67 27.99 50.09

Price Per Belt

If you thought that the only way to plane and dimension rough sawn lumber was with aplaner, you must try these belts. Only available in coarse grits, these belts must be usedwith caution because they’ll eat away a board in no time.Tough Alumina-Zirconia grains(two steps away from diamonds in hardness) on a heavy cloth backing will outlast, out-sand, outplane and simply outperform any abrasive on the market. Other companiesboast of having similar belts, but don’t be fooled.These are the real things, used in heavyindustry for years! You’ve got to try some of these on your portable or stationary beltsander. Buy these one at a time if that’s all you need.You’ll think they never wear out!

With powerful special DC motor, quiet and long-lasting.The sanding belt is located flush on the leftside to allow surfaces to be sanded "right down tothe corner". Fine adjustment for the rollers pre-vents running off on the side. Spring clamping sys-tem for easy replacement of belts without tool.Housing made of fibreglass reinforcedPOLYAMIDE. Complete with screw clamp and 5each 120 grit and 240 grit sanding belts.Technical data: 110 - 120 V. 1/5 hp (150 W). Sandingbelt 1 37/64" x 10 7/16" (40 x 265 mm). Sanding sur-face 2 23/64" x 1 37/64" (60 x 40 mm). Belt speed 525ft/min (160 m/min). Weight 1.5lb (700 g).

Planer BeltsPlane And Dimension With These Timesaving Belts

Proxxon Block BeltSander

Belt Sander BBS#PX38526 ............................$159.00

ALUMINUMOXIDE BELTSFOR BBS - 5 PACK80 Grit #PX28922 ............$10.75120 Grit #PX28924 ............$10.75180 Grit #PX28926 ............$10.75240 Grit #PX28928 ............$10.75

SHOP ONLINE FOR SPECIALS AND CLOSEOUTSWWW.WOODWORKINGSHOP.COM

9

BELT SANDING


GRAPHITE ROLLS3" x 1yd. #GR44890 ............$4.954" x 1yd. #GR44891 ............$6.956" x 1yd. #GR03062 ............$7.95

This heavy canvas-backed graphite by theyard will reduce friction and therefore reducethe heat generated by your sander. It will alsoextend the life of your belts and the life ofyour belt sander.

Graphite Rolls

There is now a low-cost alternative to throwingaway clogged sanding belts and discs. Try theAbrasive Cleaning Stick from Klingspor’sWoodworking Shop. Loaded wood particles andresin are easily cleaned away with this all-naturalstick. No chemicals needed, simply hold the stickfirmly against the moving belt or disc and watch inamazement.

Abrasive Cleaning SticksExtend The Life Of Your Belts And Discs

ABRASIVE CLEANING STICKS8" x 2" x 2" #BS99801 ....$7.95BENCHMOUNT BELT/DISCCLEANER #WK13100......$5.95

Using the Wide Belt Cleaning pad is aseasy as sanding a piece of wood. Justrun the pad through the sander and thebelt is freed of the sawdust. Pad meas-ures 15" x 20" x 11/8"

Wide Belt Cleaning Pad

WIDE BELT CLEANING PAD#WK30030....................$69.95

Use your 3" x 21" belts to hand sand! How?Simply place one of your belts on to the spring-loaded SandDevil and you’re ready to go withflat hand sanding. Use the SandDevil to sandalready flat and smoothed surfaces to theirdesired finish. Belt changing is quick and easyand you make full use of the belt by simplyadvancing the belt. Sand with the tip for tightspot sanding, sand with the rounded end for

sanding of concave surfaces or sand flat. Thismultifunctional tool will round out your handsanding needs and make use of your common3" x 21" belts.

SandDevilUse Sanding Belts For Hand Sanding - Now with new quick release!

SANDDEVIL #SV32100 ........$19.95GET 3 BELTS FREE WITH PURCHASE- 120, 150 & 180 GRIT - SAVE $6.00!! #PB00321

Hook & Loop Hand File Conveniently Round OffCorners, Break Edges And Carve

Hook & Loop Rolls 220 Grit 180 Grit 120 Grit 100 Grit 80 GritITEM# KR31868 KR31867 KR31866 KR31865 KR3186411/8" x 10 Yds $6.95 6.95 6.95 6.95 6.95

FILE SANDER #HF10000 ....$9.95Kit w/paper #HF15500 ..$19.95Consists of 1 roll each of 80 grit, 120 grit, and 220 grit

We found a great deal of use for this unique handsanding tool. Break the sharp edge off of a table-top, round off a corner, use it to remove stock whilecarving, sand a mortise, etc, etc. At about 11/8"wide, large or small areas can be sanded efficient-ly and effectively. With a convenient hook & loopsandpaper attachment system, changing grits istrouble-free. Use the KLINGSPOR Kling-On®

(hook & loop) rolls for best results.

Our famous KLINGSPOR Gold sanding belts have been requested many times so finallyhere they are. Our only NON LOADING offering in the belt line, these premium sandingbelts are the perfect addition for crafts people and those who do a lot of softwood work.*One suggestion, make sure you check tracking and tighten before sanding.

KLINGSPOR GOLD “Famous Gold Material”Sanding and Sharpening Belts

1"x 30" 1"x 42" 2"x 72" 4" x 36" 6" x 48"

400 Grit SB65514 SB65515 SB65537 SB22799 SB00526$1.95 2.15 4.05 5.89 10.35

320 Grit SB57265 SB65395 SB65423 SB99424 SB00525$1.95 2.15 4.05 5.89 10.35

220 Grit SB66706 SB13835 SB65185 SB99423 SB00524$1.95 2.15 4.05 5.89 10.35

180 Grit SB04246 SB65053 SB65069 SB99414 SB65117$1.95 2.15 4.05 5.89 10.35

150 Grit SB85425 SB64972 SB85427 SB99422 SB00523$1.95 2.15 4.05 5.89 10.35

120 Grit SB85438 SB64810 SB64834 SB09000 SB00522$1.95 2.15 4.05 5.89 10.35

COMBO* SB99730 SB99742 SB99772 SB99499 SB00599$9.95 10.45 20.95 29.95 54.95COMBO* - Includes one belt of each grit

1"x 30" 1"x 42" 2"x 72"LINEN SB26865 SB08758 SB17130

$2.95 2.95 3.95

The slim design of this tool allows you to sand intricate carvings,dovetails, turnings, ceramics and other hobbies and crafts. TheSanding Stick is made of high impact plastic that won’t breakunder pressure and gives you long life through many sanding sit-uations. These sticks use an abrasive belt that is held on with aspring loaded tension end.This allows you to rotate the belt aroundthe stick to get maximum use out of it.With three widths available,1/4", 1/2", and 3/4", you’ll be certain to find one for every situation.

Sanding SticksSand The Tiniest Groove, Bead or Routed Surface

REPLACEMENT BELTS

FIN

EM

ED

COAR

SE

10 Pack 1/4"x 123/4" 1/2"x 161/2" 3/4" x 20"500 Grit LB01120 LB01063 LB01068

$6.95 7.45 8.75400 Grit LB01121 LB01064 LB01061

$6.95 7.45 8.75320 Grit LB01122 LB01065 LB01067

$6.95 7.45 8.75220 Grit LB01071 LB01091 LB41121

$6.95 7.45 8.75180 Grit LB01072 LB01092 LB01093

$6.95 7.45 8.75120 Grit LB01123 LB01066 LB31755

$6.95 7.45 8.7580 Grit LB01124 LB01125 LB01126

$6.95 7.45 8.75

1/4" x 6" 1/2" x 8" 3/4" x 10"BLACK LS25050

$2.95YELLOW LS25040

$2.95GREEN LS25035 LS45035 LS65035

$2.95 3.95 4.95BLUE LS25025 LS45025 LS65025

$2.95 3.95 4.95ORANGE LS25001

$2.95RED LS25015 LS45015 LS65015

$2.95 3.95 4.95GRAY LS25070

$2.95

SANDING STICKSEACH

FIN

EM

ED

COAR

SE

10


ABRASIVE ACCESSORIES

You’ll be surprised at how comfortablesanding with a hand block can be after youtry this block from Europe. Extended handsanding can be done without excessivefatigue. The hand sanding portion of yourproject can determine its overall finishedlook. If you can’t be comfortable doing it,you won’t spend any time concentratingon this important step. So, you’ve got togive this a try. It’s made of a dense foam thatis firm enough to handle a rough handsanding job on flat surfaces yet soft enoughthat it won’t gouge your work. It can only beused with Hook & Loop paper.You’ve got totry this one to know what comfort along withfunctionality is all about.

HAND BLOCK #VB20000 .....$9.95Kit w/paper #VB25000.........$16.95Consists of (1) 10 pack each of 100 grit,150 grit, 220 grit and one hand block

ITEM #10PK

320 GritKS84938

$4.95

220 GritKS84936

4.95

150 GritKS84934

4.95

120 GritKS84933

4.95

100 GritKS84932

4.95

80 GritKS84931

4.95

Tru-Flat® Heavy RubberSanding Blocks

5" TRU-FLAT® #KL05215.........$8.959" TRU-FLAT® #KL05225.......$14.95TRU FLAT® SANDER KIT (5" & 9")#KL05000 ...............................$17.95

Buy Our Kit & Save Money!

Klingspor’s Woodworking Shop ispleased to carry the finest flat handsanding blocks available to the wood-worker today. Made of extremely heavyrubber, these blocks are the flattest andtruest we have found. What that meansto you is flat sanding made easy and vir-tually foolproof. Use your standard sheetmaterials, cut them to size, clamp themin with the built-in clamping device andstart sanding effortlessly. Two sizes areavailable so that you can use the onethat’s right for you—5" long and 9" long.

Hook & Loop Hand Block Comfort With Functionality

Cut To Size Sandpaper Sheets

WorksGreat With

Our BargainBox

Material!!

ITEM #

400 Grit

AR34004

$9.95

320 Grit

AR34320

9.95

220 Grit

AR34220

9.95

180 Grit

AR34180

9.95

150 Grit

A36743

9.95

120 Grit

AR36742

9.95

100 Grit

AR36744

9.95

80 Grit

AR51344

9.95

ALUMINUM OXIDE STEARATE PSA 2-3/4" x 10MT ROLL Buy any 3 and pay $8.96 each

The name Double Density comes from the factthat one side of this block is hard and verydense for sanding flat surfaces while the otherside is softer and less dense for sanding slight-ly contoured parts. You’re getting two blocks inone! An added plus is that you can wrap sand-paper around the block as you sand or use PSAbacked material on the dense side.This is obvi-ously a must-have for every shop!

DOUBLE DENSITY BLOCK 9/16"#KL05265...........................$4.95

Double Density Hand BlockTwo Sided Sander Gives The Best Of Both Worlds

Why buy special sheets or discsto fit every hand sander you own?When hand sanding is the onlyoption, use discs that you alreadyhave on these hand sanders.Made of long-lasting urethane.

A. HAND BLOCK FOR 6" PSADISC #KL05328 ................$12.95B. HAND BLOCK FOR 6" KLING-ON DISCS #KL05327 ........$11.95

C.URETHANE ROUND HANDPALM SANDER5" / PSA #KL05330 ..............$8.955" / KLING-ON #KL05340 ....$8.956" / PSA #KL05331 ..............$9.95

URETHANE MOLDED PSA PALMSANDER - 2-3/4" X 5"Long-lasting urethane sander withergonomic grip makes sanding of flatand slightly contoured surfaces a breeze.#KL05329 ..............................$8.95

Disc SandingBlocks


Micro Mesh Introductory Wood KitMicro-Mesh abrasives can polish to a high reflec-tive state or leave a matte or satin finish depend-ing on where you stop using the series. Micro-Mesh can be used on either bare wood or woodfinishes, wet or dry and they last 5 times longerthan ordinary sandpaper. Kit Includes 1 each of a3" x 4" sheet of 1500, 1800, 2400, 3200, 3600,4000, 6000, 8000, 12000 and a sanding block.

MICRO MESH INTRODUCTORYWOOD KIT - 1.65LB #MI30014 ......................................$19.95

Micro Mesh Soft Touch PadFor many, our flexible MICRO-MESHSoft Touch Pads are preferable oversheets. No sanding block is required,they're quick and handy to work with,conform to different shaped objectseasily, and can be used over and overagain. Kit Includes 1 each of a 2" x 2"soft pad of 1500, 1800, 2400, 3200,3600, 4000, 6000,8000, and 12000.

MICRO MESH SOFT TOUCH PADVARIETY PACK#MI30000 ..............................$10.95

240 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

ITEM# FE90046 FE89044 FE88040 FE87042 FE85045 FE84041 FE830435 Pack $6.95 6.95 6.95 6.95 6.95 6.95 6.95ITEM# FT33320 FT33220 FT33180 FT33150 FT33120 FT33100 FT3308050 Pack $18.95 18.95 18.95 18.95 18.95 18.95 18.95

FEIN Triangle Sander Replacement Sheets (Aluminum Oxide Open Coat F Weight) Hook & Loop

EXTRA FINE FINE MEDIUM

FEIN TRIANGLE SANDER REPLACEMENT DISCS 50 PACK ASSORTMENT: 10 each 60, 80, 120, 180, & 240 gritWITH HOLES #FE09035..............$25.95 NO HOLES #FE82033 ..............................$25.95

A

B

C

11

ABRASIVE ACCESSORIES


SandFast has created anew generation of sand-ing tools that use adhe-sive backed sandpaper.Quick to apply, easy toreplace and with a strongbond that will not shiftwhile sanding. Sand-Fast’s peel, stick and sandsystem is a quick, hasslefree way to apply sandpa-per that can be used onwood, metal, drywall and

SandfastUnique NewSanding Tools

A HAND SANDER W/SANDINGSHEETS #RD27600 ..............$9.95PSA SAND PAPER 5 PACK80 GRIT #RD27608................$2.95 100 GRIT #RD27610................$2.95150 GRIT #RD27615................$2.95180 GRIT #RD27618................$2.95220 GRIT #RD27622................$2.95

B PALM SANDER W/SANDINGSHEETS #RD27800................$5.95PSA SAND PAPER 10 PACK80 GRIT #RD27808................$2.95 100 GRIT #RD27810................$2.95150 GRIT #RD27815................$2.95180 GRIT #RD27818 ..............$2.95220 GRIT #RD27822................$2.95

C DETAIL SANDER W/SANDINGSHEETS (one each triangle and smallrectangle sander) #RD27900 ...... 3.95RECTANGLE:PSA SAND PAPER 20 PACK 80 GRIT #RD27908................$2.95 100 GRIT #RD27910................$2.95150 GRIT #RD27915................$2.95180 GRIT #RD27918 ..............$2.95220 GRIT #RD27922................$2.95TRIANGLE:PSA SAND PAPER 20 PACK80 GRIT #RD28908................$2.95 100 GRIT #RD28910................$2.95150 GRIT #RD28915................$2.95180 GRIT #RD28918 ..............$2.95220 GRIT #RD28922................$2.95

other surfaces. The bottom of each sander is a hard, flat rub-ber that’s perfect for adhesive paper and is perfect for sand-ing flat surfaces.

A

B

C

Soft Sanders are designed to sandalmost any shape. The kit includes 6blocks of 3 different consistencies andeach one is a different shape. Theywill help you sand coves, inside cor-ners and many more contours. Due totheir durability and resistance to mostsolvents, the blocks are ideal for bothmarine and automotive use. SoftSander blocks are made for adhesivepaper, but can also be used with reg-ular sandpaper either wet or dry.

Soft Sander 5" Set

SOFT SANDER 5" SET#SL00701 ..................................$24.95

Size 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

ITEM # SH10157 SH10156 SH10155 SH10154 SH10153 SH10152 SH10151 SH10150

23/4"x 5" $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95

FLEXIBLE CLOTH PSA SHEETS PRICE PER 5 PACK

Whether you’re sanding woodturningprojects, scroll saw work, removing car-bon build-up from piston rings, finishingintricate settings on jewelry or cleaningsludge and rust from pipe threads, theseflexible Abrasive Cords & Tapes will beindispensible in your shop. AbrasiveCords & Tapes sand, debur, grind and

Abrasive Cords & Tapes Dental Floss For Wood!

CORDS (LENGTH 50 FT.)#MI50005 .....180 Grit .....070" ...$16.95#MI52005 .....150 Grit .....055" ...$11.95#MI54005 .....180 Grit .....030" ...$11.95

TAPES#MI56005 .....180 Grit ....3/32" ...$11.95#MI58005 .....150 Grit ....6/32" ...$13.95

This is one of the most versatile hand sanders on the market today. Virtually any shapefrom grooves to dowels to turnings can be easily sanded with the Curv-A-Flex. Thesander “locks” the sandpaper in so there’s no crimping or creasing that could ruin yourworkpiece.Wrap the sandpaper around the outside or use it on the inside to sand round-ed objects. May be used wet or dry with any half sheet.

CURV-A-FLEX#KL05205 ......................$7.95

Curv-A-Flex Locking Channel Edge/Flat

SmallRadium

MediumRadium

WideRadium

Extra-WideRadius

Curv-A-Flex Hand Sander Twist And Turn ThisVersatile Hand Sander To Sand Many Different Shapes

Multi-SheetSanding BlockThe Multi-Sheet Sanding Block is ideal forthe person who wants a large flat anddense sanding block that holds more thanone sheet of paper. A standard 9 x 11sheet can be ripped into 4 sheets and allclipped into the sanding block. As onewears out, tear it off and you’ll have abrand new sheet of abrasive exposed. Its’ergonomic design make it easy to hold anduse for long periods of time. A very unique

polish hard-to-reach areas that are inac-cessible with regular sandpaper. Use innarrow slots, grooves and small holes inwood, metal and plastic. Every woodwork-er, home handyman, machinist, jewelerand plumber should have several sizes intheir tool box.

MULTI-SHEET SANDING BLOCK#PW10000 ........................$19.95

clamping device makes it quick andeasy to load and hold the paper. Thesanding block measures 73/4" x 23/4".

TEARDROP#KL05235..........$7.95SAND-EZE#KL05245..........$5.95

Tight NoseGroove

Inner BodySanding

RadiusSanding

Multi AngleSanding

These relatively flexible rubber shapes will get you intothose tight corners of molding and in and around routededges and plunges. Two sizes give you the flexibility towork large and small pieces.Simply wrap your sandpapersheet around the comfortable shape, tuck it into the cen-ter and start sanding without worry about gouging or over-sanding. Reverse the sandpaper to the inner surface tosand spindles, channel dowels and tubing. Both sizes usestandard cloth or paper sheets in coarse, medium or fine.The Teardrop measures 13/4" around and 51/2" long, whilethe Sand-Eze measures the same diameter but only 21/2"long for more intricate work.

Teardrop & Sand-Eze Hand SandersSand Nearly Any Molding or Routed Edge

Soft Hand PadsPerfect For Extended Hand SandingThese 5" and 6" soft foam hand sanders havean elastic strap that holds the pad to yourhand. No more gripping the pad and applyingtoo much pressure to the workpiece. Best ofall, anything you can wrap your hand around,you can wrap this hand sander around. Idealfor extended hand sanding of contoured parts.

5" X 5/16" HAND SANDER/PSA#FR05000 ......................$5.956" X 5/16" HAND SANDER/PSA#FR06000 ......................$5.95

5" X 3/16" FLEX HAND PAD/PSA#FR21150..........................$5.955" X 1/8" FLEX HAND PAD/H&L#FR22150..........................$5.95


SHEET SANDING

ALUMINUM OXIDE Available with either a paper or a flex-ible cloth backing these sheets make short work of bare

wood sanding. The paper backed material is ideal formost hand, orbital and jitterbug sanding of mostly flat sur-

faces and is the most economical of all the sheets.That’swhy it’s often called “production paper”. Our cloth

backed sheet is the softest and most flexible sheet mate-rial on the market and can get you into those tight areas that you

thought you could never sand into. Twist it, crumple it or fold it, you won’truin this material or cause the grits to come off.

SILICON CARBIDE With the ability to use it wet or dry, you can sand a stained piece orrub in an oil finish just like you would with a steel wool. With a grit range that goes all the way up to

1200, you’ll surely find many other uses for our silicon carbide waterproof paper backed sheets.STEARATE SHEETS are a premium aluminum oxide material with the grit resin-bonded to a sturdyB/C-weight paper backing and then coated with our special zinc stearate coating. As with allKLINGSPOR products, you won’t find a better paper for sanding sealer or sanding soft, resinous woodsbecause the coating will not allow the paper to become loaded up like many other sheets. Applicationsinclude bare wood sanding, auto-body sanding primer and between coats of paint.Also useful on sand-ing solid surfaces such as CORIAN, FOUNTAINHEAD and AVONITE.

9"x 11" 41/2"x 51/2" 9"x 11"5 Pack 5 Pack 50 Pack

220 Grit SH13051 SH13057 BX13051$2.40 1.32 15.25

180 Grit SH13043 SH13049 BX13043$2.40 1.32 15.25

150 Grit SH13035 SH13041 BX13035$2.40 1.32 15.25

120 Grit SH13025 SH13032 BX13025$2.40 1.32 15.25

100 Grit SH13014 SH13022 BX13014$2.40 1.32 15.25

80 Grit SH13004 SH13012 BX13004$2.67 1.45 17.25

60 Grit SH12995 SH13002 BX12995$3.03 1.53 19.65

Aluminum Oxide Paper

9" x 11" 35 Sheet Combo Pack (includes 5 each of 60, 80, 100,120, 150, 180, and 220 Grit) #SH13301 ........................$13.95


600 Grit SH52069 SH13665 BX52069$2.95 1.64 21.95

400 Grit SH31060 SH13664 BX31060$2.95 1.64 21.95

320 Grit SH23757 SH13650 BX23757$2.95 1.64 21.95

240 Grit SH30997 SH13626 BX30997$2.95 1.64 21.95

220 Grit SH23957 SH13612 BX23957$2.95 1.64 21.95

180 Grit SH22262 SH13597 BX22262$2.95 1.64 21.95

150 Grit SH23756 SH13583 BX23756$2.95 1.64 21.95

120 Grit SH25541 SH13569 BX25541$2.95 1.64 21.95

100 Grit SH25540 SH13554 BX25540$2.95 1.64 21.95

80 Grit SH25150 SH13538 BX25150$3.43 1.71 24.30

60 Grit SH25539 SH13521 BX25539$4.60 1.86 27.95

Stearated Aluminum Oxide Paper Check www.woodworkingshop.com for finer grits up to 1500 grit.

9" x 11" 35 Sheet Combo Pack (includes 5 each of 80, 100,120, 150, 180, 220 and 320 Grit) #SH33500 ..............$19.95


1200 Grit SH03137 SH03142 BX03137$3.85 1.98 23.95

1000 Grit SH03126 SH03131 BX03126$3.85 1.98 23.95

800 Grit SH03112 SH03117 BX03112$3.85 1.98 23.95

600 Grit SH03672 SH03678 BX03672$3.85 1.98 23.95

400 Grit SH03629 SH03634 BX03629$3.58 1.98 23.95

320 Grit SH03611 SH03616 BX03611$3.85 1.98 23.95

280 Grit SH03599 SH03604 BX03599$3.85 1.98 23.95

240 Grit SH03589 SH03594 BX03589$3.85 1.98 23.95

220 Grit SH03579 SH03584 BX03579$3.85 1.98 23.95

180 Grit SH03571 SH03576 BX03571$3.85 2.12 25.74

150 Grit SH03565 SH03568 BX03565$4.05 2.19 27.23

120 Grit SH03558 SH03563 BX03558$4.32 2.26 29.21

100 Grit SH03553 SH03556 BX03553$4.95 2.42 33.66

80 Grit SH03548 SH03551 BX03548$5.63 2.63 38.61

Silicon Carbide Wet/Dry Paper

9" x 11" 35 Sheet Combo Pack (includes 5 each of 220, 320, 400,600, 800, 1000 and 1200 Grit) #SH03010........................$21.95

Standard Size Sheets “Special Projects Need Special Care... A Sheet For Every Application!”

Aluminum Oxide Cloth9"x 11" 41/2"x 51/2" 9"x 11"

5 Pack 5 Pack 50 Pack

600 Grit SH80478 SH80360 BX80478$6.73 3.25 48.50

400 Grit SH80350 SH80353 BX80350$6.73 3.25 48.50

320 Grit SH80280 SH80283 BX80280$6.73 3.25 48.50

240 Grit SH80240 SH80243 BX80240$6.73 3.25 48.50

220 Grit SH80234 SH80237 BX80234$6.73 3.25 48.50

180 Grit SH80228 SH80231 BX80228$6.73 3.25 48.50

150 Grit SH80222 SH80225 BX80222$6.73 3.25 48.50

120 Grit SH80216 SH80219 BX80216$6.73 3.25 48.50

100 Grit SH80210 SH80213 BX80210$6.73 3.25 48.50

80 Grit SH80204 SH80207 BX80204$7.22 3.48 51.98

60 Grit SH80198 SH80201 BX80198$8.72 4.17 62.98

50 Grit SH80192 SH80195 BX80192$9.35 4.50 67.32

12

13

SHEET SANDING


We get many requests for sandpaper forsanders that we do not sell in our catalog.These hook & loop sheets are one item thatwe found that needed to be offered. Makitasanders seem to be everywhere, so to sat-isfy the needs of those of you that own aMakita 1/4 sheet sander, here are the pre-

punched sheets for your convenience.Theyare made of our popular stearate aluminumoxide material, backed with hook & loopmaterial

KLING-ON® SHEETS FOR MAKITASANDERS 4" x 41/2" (Packs of 5)

SIZE 220 Grit 180 Grit 120 Grit 80 Grit 60 Grit

ITEM# AS20256 AS20255 AS20253 AS20251 AS20250

4 1/2" x 4 1/2" $3.55 $3.55 $3.55 $3.55 $3.55

Packs of 5

80 Grit #KS54671........$3.95100 Grit #KS54673........$3.95120 Grit #KS54674........$3.95150 Grit #KS54676........$3.95180 Grit #KS54677........$3.95220 Grit #KS54678........$3.95320 Grit #KS54679........$3.95400 Grit #KS54680........$3.95

With the adhesive already in place, your 1/4sheet sanders can be loaded up and ready tosand within a matter of seconds. Simply peel offthe release paper backing, stick the sheet to yoursheet sander and get going. No need to messwith the irritating clamping devices. Made of ourpopular aluminum-oxide, resin bonded stearatepaper, you’ll get the life you expect fromKlingspor’s Woodworking Shop materials.

PSA Sheets Life Can Be Made Easier!

Kling-On® Sheets for Porter-Cable 340It appears as though our customers are very seri-ous about the Porter-Cable 340 Sheet Sander. Somuch so that we just had to offer pre-cut hook &loop sheets specifically for this tool. We've madethese sheets out of our premium stearated materi-al for the ultimate in life and consistency. Takeadvantage of these specially made sheets for yourPorter-Cable 340 Sheet Sander today!

KLING-ON® 1/4 SHEET8HOLE10 PACK80 Grit #KS33080........$4.95100 Grit #KS33100........$4.95120 Grit #KS33120........$4.95150 Grit #KS33150........$4.95180 Grit #KS33180........$4.95220 Grit #KS33220........$4.95320 Grit #KS33320........$4.95400 Grit #KS33400........$4.95

Kling-On® Sheets for Makita Sanders

FINE MEDIUM COARSE

SAVE! KLING-ON® 1/4 SHEET -8 HOLE COMBO PACK - Includes one pack

of each grit (80, 100, 120, 150, 180, 220, 320, & 400)

Combo Pack #KS33000 ....$27.95

Garnet, although inferior to modern-day aluminumoxide grits in some respects, has definite advan-tages over any other abrasive grains.The softer cutof garnet will leave the smoothest finish of all abra-sives. Therefore it is well suited for final sequencesanding of wood surfaces. It also achieves superi-or results when final sanding end grain and woodsthat unevenly accept stain because garnet tends to“glaze over” or burnish the wood surface.

Garnet 9" x 11" 50 Pack Sheets

Garnet 9" x 11" 25 Pack Sheets


BX40220 BX40180 BX40150 BX40120 BX40100 BX40080 BX40060$10.50 $10.50 $10.50 $10.50 $10.50 $12.50 $14.65


BX25220 BX25180 BX15025 BX25120 BX25100 BX25080 BX25060$6.79 $6.79 $6.79 $6.79 $6.79 $8.35 $10.50

Garnet Sheets

KLINGSPOR GOLD Non-Loading SheetsA Woodturner’s Dream Paper

9" X 11" SHEETS (5 PKS.)80 Grit #SH90300 ..................$9.25100 Grit #SH90302 ..................$9.25120 Grit #SH90304 ..................$9.25150 Grit #SH90306 ..................$9.25

180 Grit #SH90308 ..................$9.25220 Grit #SH90310 ..................$9.25320 Grit #SH90312 ..................$9.25400 Grit #SH90314 ..................$9.25

This material is taking the woodworking market bystorm with its softness and smooth surface finish-es. No other sandpaper on the market can matchthe “KLINGSPOR Gold” for sanding into severeprofiles and for sanding turned parts while on thelathe. Our customers have hounded us about sell-ing this product in sheet form-so here it is! The soft-ness of these sheets has made them almost leg-endary in major furniture factories where they areused to sand even the most demanding contour.

Used for sanding on contoured surfaces, as well as flatsurfaces. These sheets are best suited for use on seal-ers, wash coats, bare softwoods, and between coats offinishes like lacquer, varnish, shellac, or oil.

Lightweight SiliconCarbide Stearate Paper

9" X 11" SHEETS (50 PKS.)80 Grit #BX13533 ............$19.95100 Grit #BX13549 ............$19.95120 Grit #BX13564 ............$19.95150 Grit #BX13578 ............$19.95

180 Grit #BX13592 ............$19.95220 Grit #BX13607 ............$19.95240 Grit #BX13621 ............$19.95320 Grit #BX13646 ............$19.95400 Grit #BX13660 ............$19.95

Micro-Mesh is a unique cushionedabrasive that produces a very fine anduniform scratch pattern.The grit rangeis from 1500, which is close in scale toKLINGSPOR’s 600 grit, up to 12,000.The 12,000 will leave a scratch patternundetectable to the human eye. Micro-Mesh abrasives can polish to a highreflective state or leave a matte orsatin finish depending on where youstop using the series. Micro-Mesh canbe used on either bare wood or wood

MICRO-MESH® CUSHIONEDABRASIVES #MI01010 ........$44.95

6" X 12" MICRO-MESH® SHEETS2400 Grit #SH2400 .................$9.953200 Grit #SH3200 .................$9.953600 Grit #SH3600 .................$9.954000 Grit #SH4000 .................$9.956000 Grit #SH6000 .................$9.958000 Grit #SH8000 .................$9.9512000 Grit #SH1200 .................$9.95

HOBBY KIT: 1 each 3" x 4" sheet of 2400,3200, 3600, 4000, 6000, 8000 grit, 1 - 2" x 3" FoamSanding Block, 1 - 1 oz bottle of micro gloss polish,1 - Flannel cloth #MI01999 ..........$19.95

Ultra Fine Polishing Sheetsfinishes, wet or dry and they last 5 times longerthan ordinary sandpaper. Each kit contains 1-3"x 3" rubber sanding block and 2 each of 9 differ-ent grits each measuring 3" x 6" (1500, 1800,2400, 3200, 3600, 4000, 6000, 8000, 12,000).

The Sandbox Sandpaper Filing Systemis an easy and efficient way to store andaccess various abrasives. Sheets anddisc both can be stored flat andaccessed easy in the Sandbox. Eachweighted divider ensures all abrasivesremain flat and do not curl. Up to 8 gritscan be stored and each divider has a tabthat can be labeled with the appropriategrit number.The Sandbox Filing systemsare made so that each unit can stack ontop of the other. All assembly hardwareand instructions are included.

SANDBOX SANDPAPER INDEX FILE#IF73200 ..............................$29.95

Sandbox Sandpaper Index File

14


PUMP SLEEVES & DRUMS

#EZ30900 ...................3" X 9" ..................$9.95#EZ40900 ...................4" X 9" ..................$9.95

The Perfect Cushion For Your DrumsMany woodworkers are able to utilize a softer surface fordrum sanding. This can sometimes make the differencebetween oversanding and the perfect surface. You’ll alsorealize extended life of your pneumatic drum using thesecotton “socks” instead of just the canvas sleeve.

With these Air-Inflated Drums, contoured or irreg-ular shaped pieces of nearly any size can easilybe sanded to the perfect finish.When filled with air,they are pliable enough to sand sharp contours,yet firm enough to sand flat parts depending onhow inflated they are. Each drum comes with acanvas cover to better protect your workpiece aswell as the drum itself. Closely note the arbor holesizes available before ordering or speak with ourknowledgeable customer service representatives.The arbor needs to be at least 10" long to accommo-date the entire length. THESE DRUMS ARE NOTRECOMMENDED FOR USE ON A LATHE.

Pneumatic Drums Flexibility For The Tough Jobs

Cotton Sleeves for Pneumatic Drums

Flexibility without sacrificing strength or life is the key to PumpSleeves from Klingspor’s Woodworking Shop. You instantlyhave the ability to sand contoured parts such as chair arms andlegs, gun stocks, large molding and other fine pieces.Please measure your drum before ordering and verify whatsize you actually need.

Pump Sleeves

US DELTA2" x 9" 3" x 9" 3" x 9" 4" x 9" 6" x 9" 8" x 9"

320 Grit PU24658 PU64588 PU80169 PU64589 PU24666 PU64591$1.85 2.75 2.75 3.49 4.64 5.95






Dia. x Width

A sanding/buffing machine offers woodworkers the advantage of sanding and buffingirregular pieces. Everything from cabriole legs and spindles to bowls and other turningscan benefit from sanding and buffing. Metal parts such as hinges, knobs and other hard-ware can also benefit from buffing. This is an extremely versatile machine that all shopscould benefit from having. Comes with 1/4" to 4" bushings. Arbors are 1" in diameter and8" long.

JET 1 HP BUFFER#J577110 ..................$229.95Freight Charge ..........$20.00BUFFER STAND#J577114 ..................$169.95JET SOFT COTTON WHEEL8"X1/2"X5/8"#J575856......................$12.95JET HARD COTTON WHEEL8"X1/2"X5/8"#J575859 ....................$12.95

Jet 1 HP Buffer / Sander

Pump SleevesDia. x Width 3" x 6" 4" x 6"320 Grit PU13016 PU13026

$2.50 3.25220 Grit PU13015 PU13025

$2.50 3.25180 Grit PU13014 PU13024

$2.50 3.25120 Grit PU13012 PU13022

$2.50 3.25100 Grit PU13011 PU13021

$2.50 3.2580 Grit PU13010 PU13020

$2.50 3.25

This air-filled sanding drum has extraordinary fea-tures that set it apart from any other sander.The flex-ible rubber drum contains an inflatable air chamberwhich conforms to the work surface and disperses theheat away from the sandpaper. Air circulation insidethe drum maintains the sleeve surface at an idealtemperature without overheating.The result is perfectcontact between the sandpaper sleeve and the worksurface, with no heat build-up or gummy residue leftpermanently in the sandpaper. Even when sandingagainst the grain, Sand Boss eliminates burn markson hard or soft wood surfaces. Because the abrasivenever overheats, sandpaper life is prolonged tremendously and the sleeve surface can beeasily restored with a rubber cleaning block.

SANDBOSS DRUM1-3/4"D X 2-1/2" X 5/16"#HT17500 ............................$28.952-1/2"D X 3-5/8" X 5/16"#HT25001 ............................$32.953-3/4"D X 5-3/8" X 3/8"#HT40000 ............................$49.95

SANDBOSS KITcontains one of each HT17500, HT25001 &HT4000 abrasives and storage case#HT50000 ............................$99.95SANDBOSS DRUM 5"D X 3-1/2"Threaded to fit on 5/8" 11 spindle#HT50001 ............................$89.95

Sandboss Drum

If you have a small shop and concentrateon making small items such as jewelry,intarsia or turned items such as goblets,pens and small bowls, the final step of fin-ishing can be brought to a whole new levelwith the help of the Foredom Bench Lathe.The powerful variable speed bench latheis compact in size, measuring 13" wide,and ideal for use on any work bench. Withits permanent magnet motor, it is extreme-ly quiet and smooth running with all thepower and speed required for a wide vari-ety of polishing and buffing jobs. The castiron base has drilled mounting holes andsuction cup feet for a secure hold on anywork surface you choose. Included in thelathe package are left and right handtapered spindles, bars of Tripoli, platinumwhite and blue, carnauba wax, two 4" buffsand four 3" buffs.

FOREDOM BENCH LATHE KITWITH BUFF & COMPOUND#FO33900 ..........................$239.95

BUFF 3" X 40PLY WHITE MUSLINCOARSE #FO33901 ............$3.95 FINE #FO33902 ....................$3.95BUFF3" X 40PLY LOOSE WHITEMUSLIN COARSE#FO33903 ..............................$3.95BUFF3" X 30PLY FLANNELCANTON #FO33904 ............$4.95BUFF4" X 40PLY WHITE MUSLINFINE #FO33905 ....................$4.95BUFF4" X 28PLY RAZOR EDGEYELLOW SOFT #FO33906 ..$6.95

TRIPOLI BAR 4.5OZ#FO33907 ..............................$3.95PLATINUM BLUE BAR 5OZ#FO33908 ..............................$6.95PLATINUM WHITE BAR 5.75OZ#FO33909 ..............................$7.95 CARNAUBA WAX BAR#BK70000 ..............................$7.95

Bench Lathe Kit With Buff & Compound

PNEUMATIC DRUM3 X 6 #J575705 ..............$44.954 X 6 #J575707 ..............$46.95

15


BUFFING

These fine rubbing agents canturn your ordinary shellac orlacquer finish into an extraordi-nary high end finish. Pumicestone is made from finelyground lava and is available into grades, 2F and 4F, with 2Fbeing the coarser of the two. Afinish rubbed out with thepumice sequence will end up alittle finer than #0000 steel wooland will leave a silky smoothsatin finish.Rottenstone is made from fine-ly ground limestone. It pro-duces an extremely high gloss.It is much finer than pumicestone. There is actually such abig difference that the twoshould not be used as a threepart sequence. Use eitherpumice or rottenstone. Pumicefor satin and rottenstone forhigh gloss. If you want to gowith the rottenstone, pre-sandyour surface with 2000 gritwet/dry paper first.Paraffin Oil is used as the lubri-cating liquid for both rubbingagents. Either sprinkle theabrasives on the surface andthen pour on some oil or keep a

TIP: It is a good idea to have a different Felt Block for each gradeof abrasive powder you use.

pre-mixed oil/abrasive solution in a plastic bottle.Whichever works best for you. Once you have theslurry on the surface, rub with a felt block. It’s best tohave a felt block for each grade of abrasive. Once thefinish has been rubbed out, clean off the surface witheither a tack cloth or soft rag damp with mineral spirits.Be sure to wipe with the grain. No Air Shipments!

FELT BLOCK#BH90210 ....................$5.95PUMICE STONE (1 LB)#BH14025 2F......................................$6.95 #BH14045 4F......................................$6.95ROTTENSTONE (1 LB) #BH15006 ....$6.95PARAFFIN OIL (1 PINT) #BH28645 ..$8.95

• • BUY KIT & SAVE!!!! • •BEHLEN KIT(2F, 4F, Rottenstone,Paraffin, Felt Block) #BH10000 ..$22.95

21/2" MUSHROOM BUFF #SN10001 ....$6.953" MUSHROOM BUFF #SN10002 ....$8.954" MUSHROOM BUFF #SN10018..$10.95MUSHROOM BUFF KIT:SAVE OVER 25% Includes one of each size

#SN11500 ............................$19.95 3" X 60 PLY X 1/4" SHANK BUFFINGWHEEL #SN10000 ..........................$4.954" X 60 PLY X 1/4" SHANK BUFFINGWHEEL #SN10012 ..........................$5.95

Mushroom buffs can be used on var-ious finishes and can be used inhand held drills or in stationarymachines. They can be used inmany different buffing applications,but are ideal when buffing concavesurfaces. Consider having more thanone of each for different compoundsyou may be using.

Now you can get a professional shine thatlooks better than a hand rubbed finishusing Surbuf buffing pads designed specif-ically for use with orbital sander. Surbuf’spatented Microfingers technology usesthousands of soft independent, non-tuftedvertical fibers to distribute your finish deepin every surface pore and then rotates andoscillates these fibers thousands of times a

minute for maximum coverage. Unlike cot-ton, wool or regular foam pads,Microfingers technology minimizes surfaceload up by using less finishing agents thanother pads while at the same time applyinga thin, even layer of these agents overevery micron of surface area. Microfingersfinish the job by polishing and buffing everysurface micron for swirl free, high gloss fin-ishing that looks even better than a handrubbed finish.

5.5" SURBUF 2 PK#KJ10000............................$14.956" SURBUF 2 PK#KJ20000............................$15.957" SURBUF 2 PK#KJ30000 ..........................$16.95

Buffs

Surbuf

Premium Polishing CompoundsMenzerna "World class polishing products since 1888"

Pre-Polishing Paste - 1.65lb#MZ20034....................$14.95Intensive Polishing Liquid - Pint#MZ91012....................$18.95Menzerna Polishing Kit#MZ10000....................$39.95

Menzerna’s pre-polish is the first step of a threestep process that will make your woodworkingproject come alive. After sanding the finish to400 grit, rub down with the Menzerna pre-pol-ish. This can be done either manually or with apower buffer. After pre-polishing, wipe downand repeat the process using the Menzernapolishing compound. This will help you achievea high gloss finish. The surface can be wipeddown between each process using mineralspirits. The last step which will give the surfacean ultra high gloss surface is the IntensivePolishing liquid. This can be buffed out using ahigh quality lambs wool pad.

6" X 60 PLY X 1/2" HOLESEWN BUFFING WHEEL#SN10004 ........................$8.958" X 60 PLY X 1/2" HOLESEWN BUFFING WHEEL#SN10014 ......................$12.95

MENZERNA Polishing Paste - 1.65LB#MZ16340 ............................$14.95

Pumice Stone, Rottenstone, Paraffin Oil &Felt Block Traditional Products That Create Ultra-Fine Polishes

The Wood Buff’s ease of use, coupled with the sheenit produces, makes it a particularly elegant solution tomany finishing dilemmas. The Wood Buff may beattached to a 1725 rpm stationary motor, a woodlathe or a multi use shop tool. The Wood Buff Kitincludes a combination 1/2", 5/8" Adaptor, one end ofwhich attaches to your motor shaft where it is held inplace by set screws. The other end is threaded toaccept the bolts installed in the center of each buffingwheel, enabling you to change the wheels quicklyduring the buffing process. The Wood Buff kit consistof 3, 8" buffing wheels with quick change center bolts,a combination adaptor, two buffing compounds, onebar of carnauba wax and complete instructions.

Finally - a device thatallows you to run threebuffs simultaneously.On one end of this 17"mandrel is a machined#2 Morse taper to fit inthe head stock of your lathe; on the other a center to accept the tail stock.The shaft is 3/4"in diameter with buff spacing 4" apart. The 3-On Mandrel lets you quickly and efficientlyrun small items through the complete wood buffing process without the distraction ofchanging wheels between steps. It may be purchased separately or in a kit form with buffs,compounds and wax included

Beall Wood Buff Kit

3-OnMandrel

BEALL WOOD BUFF KIT#BK70007 ..............$69.95Kit Replacement PartsBUFF WHEELW/ARBOR TRIPOLI 8"#BK70004 ..............$16.95BUFF WHEEL W/ARBORW DIAMOND 8"#BK70005 ..............$16.95BUFF WHEEL W/ARBORCARNAUBA 8"#BK70006 ..............$16.95TRIPOLI BAR#BK50000 ................$4.95 WHITE DIAMOND BAR#BK60000 ................$5.95CARNAUBA WAX BAR#BK70000 ................$7.95TRIPOLI WOOD BUFF8" X 3/4" HOLE#BK83400 ..............$15.95WHITE DIAMOND WOODBUFF 8" X 3/4" HOLE#BK83401 ..............$14.95CARNAUBA WAX WOODBUFF 8" X 3/4" HOLE#BK83402 ..............$14.95

MANDREL KIT WITH BUFFS /COMPOUNDS / WAX#BK70024 ........................$89.95

LATHE MANDREL 3-ONW/MORSE TAPE #2#BK70011 ......................$39.95

16


FINISHING

Mahoney’s Walnut Oil is the best new foodsafe finish we have used in years. It’s 100%Pure Filtered Walnut Oil and hardens into afood safe satin finish for bowls, butcherblocks, wood utensils, and other wood utilityware. Also works great as a satin finish onexotic woods and furniture in general! Wipeon liberally with a soft cloth or paper towel orimmerse object in oil and let soak for 5 min-utes.Let harden for 24 hours and reapply asdesired. Unlike most store bought walnutoils, this walnut oil will harden creating a bet-ter finish.The final step for this food safe processwould be the application of Mahoney’s OilWax. A blend of beeswax, carnauba wax,and walnut oil. This product creates a foodsafe satin sheen for bowls, butcher blocks,wood utensils, and other wood utility ware.Rub on liberally with soft cloth into wood

MAHONEY'S WALNUT OIL 16OZ #MF10000 ........................$12.95MAHONEY'S OIL WAX FINISH 8OZ#MF20000 ........................$12.95

Behlen Furniture Refinisher will easily remove shel-lac, varnish or lacquered finishes. It quickly meltsthrough the finish without removing the wood of itsnatural oils and patina. Furniture Refinisher is alsoan excellent after wash for furniture that has beenstripped using conventional furniture strippers. Itleaves the wood rich and warm and free fromresidues that can cause a white haze, as many moreharsh strippers do. Apply with steel wool or nylonmesh pads

Furniture Refinisher

Behlen Scratch Off Polish is the perfect product for maintenanceand repair in one step. The polish contains special oils and col-orants that help hide and blend minor scratches in darker shadesof finished wood. Just pour a small amount of Scratch Off Polishonto a soft cloth and wipe over the surface. After you allow thepolish to remain for a few seconds, simply wipe it off with a cleanpart of the cloth.

BEHLEN SCRATCH OFF FURNITURE POLISH#B8001255 ..............................$8.95

Scratch Off Furniture Polish

Filters foreign matter or un-dissolved solid par-ticles found in various stains or coatings likepaint, varnish, lacquer and enamels.

FINISH STRAINER - 12PK#M9721001 ......................$3.95Buy 2 packs or more for................................$3.49 each

Finish Strainer

No Air Shipments!

No Air Shipments!

Never let anyone know how hardyou worked to finish a project withthese high-quality disposablegloves.Your skin will be safe fromthe severe chemicals that can beinvolved when using many typesof finishes and solvents. Thesegloves are great for other choresaround the house too, like clean-ing kitchens and bathrooms,changing the oil in the car, etc.

DISPOSABLE FINISHING GLOVES - LG #D2027 ......$12.95/100 pack

Disposable GlovesKeep Your Hands Safe Economically

Tack Cloth A Must Before Applying Finishes

Klingspor’s Woodworking Shop is doing every-thing possible to help you achieve the best finish pos-sible. Use this high quality open mesh tack cloth toclean the last bits of dust off of your workpiece beforeany type of finish is applied. Using the tack cloth is astep that should not be skipped. We have found ableached cheesecloth type that is completely saturat-ed with a resinous material that allows the cloth tostay sticky yet soft throughout its lifespan. Don’t set-tle for an inferior tack cloth...the quality of your finishdepends on it.

TACK CLOTH - 24 PACK #TC00024......................................$16.95

Have you ever been in a bar or a restaurant and noticedmoney, seashells or other items suspended in the finishof a table or other surface? The finish is Mirror Coat.Mirror Coat is a 2 part epoxy resin system speciallydesigned to create high-gloss, clear decorative coatingfor wood and other materials. Unlike most bar top coat-ings, Mirror Coat is mixed in a ratio of two parts resinand one part hardener. This 2:1 ratio makes for a muchharder and more heat resistant coating than typical bartop coatings. No Air Shipments!

MIRROR COAT11/2 PINT #SY00031 ....................$39.9511/2 QUART #SY00032 ....................$59.95

Mirror Coat Bar Top CoatingEasily Create High-Gloss Clear Coatings

Deftoil Danish Oil Finish is a tung oil, urethane blended fin-ish that penetrates, seals and leaves a natural looking finishon wood floors, furniture, paneling and more. The oil andurethane mix makes it both an easy to apply finish as wellas a more durable surface as compared to simple oil finish-es. Deftoil penetrates into the wood, taking the urethanewith it, and leaves a durable finish that will not chip crack orpeel and easy to touch up. If you are looking for the patinaof a project to improve over time, Deftoil is a perfect choice.

DEFTOIL DANISH OIL FINISH NATURALGallon #DF07001 ....................$29.95Quart #DF07004......................$10.95Pint #DF07008........................$7.95

Deft Danish Oil Finish

Now available from Klingspor’s Woodworking Shop is atime saving finish for wood turners. Behlen’s Wood TurnersFinish is a fast drying, ready to use finish designed to beapplied to turning objects while they are still on the lathe. Thisspecially formulated finish dries fast and resists runs, drips and errors and its finish

is dry to the touch in minutes and can berecoated or displayed.

WOODTURNER’S FINISH - PINT#B61108885 ....................$18.95

Woodturners FinishReady To Apply While Working The Lathe

No Air Shipments!

BEHLEN FURNITURE REFINISHER QUART#B7401336..........................................$10.95

These heavyweight, reusable rubber gloves are excel-lent for keeping your hands clean and safe. Whetheryour staining with a variety of stains or stripping furni-ture, these gloves are a necessity in every shop. Keepthem and use them again and again.

Heavy Duty Refinishing Gloves

HEAVY DUTY REUSABLE GLOVES #TC01703 ...................$4.95 pair

Mahoney’s Oil

grain. Let sit for one hour. Buff off with softcloth or buffing wheel. Works best whenapplied over Mahoney's Utility Finish.

17


FINISHING

Swell-LockSwell-Lock is unsurpassed for tightening wood joints.Everything from chair rungs, mortise and tenon joints, doweljoints to hammer and axe handles and other socket joints canbe tightened up with Swell-Lock. Simply clean the wood sur-face and apply Swell-Lock to the portion to be tightened thenpress together. Swell-Lock is not a glue, it actually works byswelling the wood.

BEHLEN SWELL-LOCK #B7454000..............$5.95

ROCKHARD TABLE TOP VARNISHPint #B60328505..........$12.95Quart #B60328506..........$19.95Gallon #B60328507..........$49.95ROCKHARD TABLE TOP VARNISHREDUCERQuart #B60328516............$8.95

RockHard Table Top VarnishThe Name Says It All

Behlen Water WhiteSpar Varnish

RockHard Table Top Varnish is Behlen'stop-of-the-line resin oil varnish. There is noother more durable or harder finish thanRockhard! It is ideal for counter tops, tabletops and any and all surfaces that requiremaximum protection from water, alcohol,chemicals, detergents and any other dam-aging liquids. This Table Top Varnish cre-ates a hard, gloss abrasion resistant sur-face ideal for many applications. Simplybrush on and allow 4 hours to dry for a dustfree finish. Additional coats may be addedas desired. It is recommended that the firstcoat of RockHard Table Top Varnish bemixed 1:1 with RockHard Table Top VarnishReducer. No Air Shipments!

Behlen’s Water White Restoration Varnish is a top qualityphenolic resin, “long oil” varnish for interior or exterior appli-cations. It’s tough, durable, elastic, water proof and with-stands weather and heavy foot traffic. This pale yellow for-mulation is not affected by salt water and contains no lead.

BEHLEN WW SPAR VARNISH QT#B60322756..........................$19.95

COMPLETE SPRAY GUN #PV00267 ..............$5.95POWER UNIT / SPRAY GUN #PV00268..........$4.95 PRODUCT CONTAINER / SPRAY GUN #PV00269 ..........................$1.49

Preval Sprayer Unit“The ideal applicator for Behlen Solar-Lux and otheralcohol based stains”You can spray just about everything with the Preval Spray Gun.This handy portable tool can spray all kinds of liquid solutions.Paint, lacquer, solvents, stains, oil, cleaners, insecticides, fertil-izers, disinfectants, even clear water – Preval does it all.Preval is a big time saver for small jobs. Forget trying to matchcolor swatches on pre-filled spray cans.Preval lets you use yourown paint, or stain, so you get perfect color matching everytime. No painting tool on the planet does as much as easily asPreval.The spray gun with a hundred uses, Preval makes shortwork of the toughest touch-up jobs. It’s perfect for smaller scaleprojects, too – like painting a chair, or varnishing a table. Best ofall, clean-up is a snap.You’ll save time with Preval.You can double your productivity by using a different jar for eachjob. Just insert the power tube, and you’re ready to spray thenew liquid. Uses no CFC’s.

Designed for exterior wood applications, EXTERI-OR 450 varnish provides your wood with a tough,protective finish that will withstand the rigors of thesun, rain, and wind. Ideal for outdoor furniture, doors,and case goods, EXTERIOR 450 is fortified with UVabsorbers to help minimize fading and maximizeperformance. Its built-in mildewcide retards moldand mildew growth.Exterior 450 is tough and flexible, and will resist theexpansion and contraction of the wood through hotsummers and cold winters that typically causescracking and peeling. Available in Satin and Semi-Gloss, it flows well and dries rapidly to a clear finish.

EXTERIOR 450 WB OUT-DOOR FINISH - QUART#GF90055 ....................$22.95

Exterior 450 WaterBased Outdoor Finish

Oz Cream Polish boast a concentrated formula thatcleans, polishes and protects. Just apply, wipe andbuff to a beautiful sheen. Oz Cream Polish is excel-lent for all types of smooth surfaces: wood, marble,tile, leather and painted or chromed metal. Oz isnon-flammable, non-abrasive, greaseless, quickdrying and contains no silicons.

BEHLEN OZ POLISH#B80012415 ..............................$8.95

Behlen Oz Polish

General finishes dye stains are unique, ultra penetratingstains designed to work like solvent based stains. Thedeep rich tones enhance the wood grain and producevibrant colors, especially on woods like cherry, walnutand maple because they penetrate deeply into the cellstructure.They can also be used as a toner when mixedwith General Finishes water based products and are aperfect match when used under pigment based stainsto create that deep, factory finish look. All top coats areacceptable over General Finishes Dye stains.

Dye Stain

Amber#GF90070......$10.95Light Brown#GF90071......$10.95Cinnamon#GF90072......$10.95Medium Brown#GF90073......$10.95

Dark Brown#GF90074......$10.95Merlot#GF90075......$10.95Ebony#GF90076......$10.95Orange#GF90077......$10.95

Empire Red#GF90078......$10.95Vintage Cherry#GF90079......$10.95Yellow#GF90080......$10.95

DYE STAIN - PINT

EF STAIN - PINTCountry Pine#GF90006 ....................$10.95Shaker Maple#GF90007 ....................$10.95Pecan#GF90008 ....................$10.95Antique Oak#GF90009 ....................$10.95Early American#GF90010 ....................$10.95Antique Cherry#GF90012 ....................$10.95Br.Mahogany#GF90015 ....................$10.95Black Cherry#GF90016 ....................$10.95Rosewood#GF90017 ....................$10.95

Whitewash#GF90018 ....................$10.95Espresso#GF90024 ....................$10.95Golden Oak#GF90058 ....................$10.95Black#GF90090 ....................$10.95

Polyacrylic Satin-Quart#GF90019 ....................................$16.95Polyacrylic Satin-Pint#GF90022 ....................................$10.95Polyacrylic Gloss-Quart#GF90020 ....................................$16.95Polyacrylic Gloss-Pint#GF90023 ....................................$10.95Extender/Thinner #GF90021 ........$3.95

EF Wood Stains have been created with technology new towater base stains. Our new EF Stains have all the advantagesof oil base stains: they spread easily, can be repaired, can beblended effortlessly, and have plenty of open time. The thickerformula allows controlled penetration, which will reduce blotch-ing on hard-to-stain woods such as Aspen, Pine and Maple.This stain formula will make wood staining an enjoyable experi-ence for you. No Air Shipments!

Environment Friendly StainBe Conscientious And Get A Good Stain At The Same Time

Peel Away 6 will remove multiple layers of var-nish, urethanes, paint, shellac, and lacquersfrom all surfaces and usually with one applica-tion. It can be used on both interior and exteriorsurfaces such as wood, brick, stone, aluminum,plaster, metal and even fiberglass. The chemi-cals in Peel Away have been chosen for theirvery low evaporation rate and high level ofbiodegradability. It is especially useful whenrestoring beautiful old furniture and will not raisethe grain or discolor the wood. Needs to be usedwith Peel Away paper!

Peel AwayRemove Finishes Without RaisingThe Grain Or Discoloring The Wood

PEEL AWAY 6 QUART#DC60320......................$15.95PEEL AWAY PAPER 3 PK#DC10230........................$5.95

18


This is a box cram-packed full of 5 lbs. ofthe softest, whitest cloths.They have beenprewashed so they’re lint-free, clean andfree of any contaminants. It’s hard to evencall these rags - fine clothing could bemade out of this stuff! You’ll find that apply-ing oils, stains, polishes and rubbing lac-quers and varnishes with these cloths willbe one of the easiest ways to get the finishon your project. Plus, your work will lookbetter, feel better and come out like you’vealways hoped it could. Every shop and

garage should have a box of these as wellas whoever dusts and polishes your furni-ture around the house. Every piece is of agenerous size and can be cut into smallerpieces to make the box go even further.Make your finishing and clean-up as has-sle-free as possible...order your Box ofRags today!

BARGAIN BOX OF RAGS 5LBS.#BC33010..........................$14.95

Bargain Box of Rags Another Shop Must-Have

Steel wool users won’t use anything elsebecause this is the best steel wool you can pos-sibly buy. It’s made from extremely long strand,top quality steel. It resists crumbling better thanany other type of steel wool. Our #00 is fairlyaggressive and faster cutting than the #0000grade which is best suited for applying wax, cut-ting down a finish or polish and light cleaning.

STEEL WOOL -16 PAD PACK#0000 #RH06100 ....$4.95#000 #RH06101 ....$4.95#00 #RH06102 ....$4.95#0 #RH06103 ....$4.95COMPLETE SET1 OF EACH#RH06999................$15.95

Steel Wool For the Woodworking PerfectionistWe feel that this product is asimportant as sanding products toyour overall finish, so we haveincluded it at many of yourrequests. Don’t overlook thisaspect of finishing when youneed a velvety smooth surface.

Woodworkers across the country arefinding the super benefits of this prod-uct. Steel wool will, over time, shredand rust no matter how good it is.These nonwoven nylon 6" x 9" hand pads willaccomplish the same thing that your steelwool will without the long-term problems.Eachtype pad is a different grit so you can use itanywhere you’d use your steel wool.The Fineis equivalent to #1 steel wool for stripping.TheVery Fine is the same as #00 or #000 steelwool and the Ultra Fine is equal to #0000.

GENERAL PURPOSE (GREEN)#NW06211 ........10 PACK/$8.99FINE (MAROON)#NW06216 ........10 PACK/$8.99ULTRA FINE (GRAY)#NW06254 ........10 PACK/$8.99NO ABRASIVE (WHITE)GREAT FOR FINAL RUBDOWN#NW38052 ........10 PACK/$8.99HOLDER #TC66666 ..........$3.95

SyntheticSteel WoolAll the Advantages ofSteel Wool - BUT BETTER!

Without Bloxygen, your varnishes, lacquers, etc.have a tendency to get a “scab” on top which meansthat they are curing, just as if they had been appliedto a surface for finishing. Bloxygen, which is heavierthan air, lays a covering of inert gas over the top ofyour liquid stain or paint preventing “air” from curingthe products. Your finishing products will last longer,stay fresher and be constantly ready for use. NOTFOR USE WITH LATEX PAINTS!! (Each can goodfor 60 applications.)

BloxygenOne Quick Spray Keeps Your Stains & Paints Fresh

BLOXYGEN #BG57000 ....................$9.95

No Air Shipments!

FINISHING

GRANDMA’S LYE SOAP#HW60018 ........................$3.95

Grandma’s Lye Soap is a pure, natural soap withno additives or detergents that will dry out and irri-tate the skin. It is gentle enough to use daily.Other things people use it for is poison ivy, rash-es, insect bites and even clothes.

Grandma’s Lye Soap

HARSH WINTER HANDSOOTHER LOTION #HW53021 ......$6.95

We all know how dry and chapped the hands can getwhen woodworking in the cooler months. The woodseems to pull out every bit of moisture. Harsh WinterHand Soother will not only sooth dry skin and workroughened hands, but will also help prevent it.

Harsh Winter HandSoother Lotion Soothes Hands Without Being Greasy

PDE Paint RemoverWill Remove Up To 8 Coats OfPaint With One DoseIf you are looking for a paint remover that works,look no farther than P.D.E.. P.D.E is non-toxic oncemixed and is easy to use. Simply mix equal partsof PDE and water in a metal container and allow tosit for a few minutes. One dose of PDE is good forup to 8 coats of paint. This product is not to beused on any finish other than paint. This is the bestpaint remover we offer. BEHLEN PDE REMOVER - 1LB

#B70010005 ................$12.95No Air Shipments!

19


FINISHING

Elder And Jenks is one of the oldest brush manufacturers in the country. Their companyhistory goes back to the days of George Washington’s presidency. Their brushes are stillmade to the highest standard. Our best E&J brush is the Capital Ox. Ox ear hair is espe-cially soft. This ox hair brush is ideal when applying varnish, brushing lacquer and othersolvent based finishes and an ultra smooth surface is desired. With a push chiseled edge,the CapitalOx will hold a lot of finish and will allow you to evenly and smoothly flow out thefinish. For high quality finishes and high quality results, the CapitalOx is the best brush weoffer. Another brush for solvent based finishes like varnish and brushing lacquers is theShipmate. It’s 100% white china bristle and has a push chiseled edge. It’s very similar tothe CapitalOx brush. The only difference being it’s made of white china bristle instead ofox hair. The Excel 100% black china bristle brush is a chisel edged brush that’s ideal foralkyd and oil based paint, either interior or exterior. It’s also good for varnishes, shellacsand stains. If you are painting with latex or applying other water based finishes, ournylon/poly blend angle sash brushes are the best choice. Unlike natural bristles, thenylon/poly blend bristles won’t get soft when applying water based products. With an extralong handle and an angled brush, this is a very comfortable brush to use. For the sameapplication with oil based paints, try our angled sash brushes with china bristles.

Poly Brushes Use & Reuse Or Simply Throw Away

Some projects need that quick application of stain,oil, varnish or paint. And there’s nothing more handyor quicker than these Poly Brushes.They smooth outthe finish and cover completely with fewer strokes.Best of all, if you hate the clean up involved in paint-ing or finishing, these can be thrown away after useor if you like, wash them out and use them over &over. Foam brush 3 Pack includes: 1", 2"& 3"

POLY BRUSHES#JN30123 (1 Set) ..........$1.9510 Sets of Brushes..$1.49 ea.20 Sets of Brushes..$1.19 ea.4 PK of 1" Brushes#JEN1 ..............................$1.953 PK of 2" Brushes#JEN2 ..............................$1.952 PK of 3" Brushes#JEN3 ..............................$1.952 PK of 4" Brushes#JEN4 ..............................$1.95

Premium Brushes Get Back To Basics

Kwick Kleen

With this group of products, you’ll have access to a variety of items that will make yourfinishing process easier. Thinners, oils, refurbishers, and solvents are a few of the KwickKleen materials available.

LACQUER THINNERQuart #WM17000 ......$7.95Gallon #WM17128....$18.95

ACETONEQuart #WM18000 ......$7.95DENATURED ALCOHOL

Quart #WM26000 ......$6.95Gallon #WM26128....$12.95

PAINT THINNERGallon #WM90000....$10.95

BOILED LINSEED OILQuart #WM45000....$12.95Gallon #WM45128....$28.95

TURPENTINEQuart #WM69000 ......$8.95

CAPITAL OX VARNISH BRUSH1" #ELD16888............$9.9511/2" #ELD16896..........$13.952" #ELD16900..........$19.953" #ELD16918..........$29.95

CHINA BRISTLE VARNISHBRUSH SHIPMATE1" #ELD11533............$4.9511/2" #ELD11541............$5.952" #ELD11568............$6.9521/2" #ELD11584............$7.953" #ELD11606............$8.95CHINA BRISTLE VARNISHBRUSH EXCEL1" #ELD11428............$2.9511/2" #ELD11444............$4.952" #ELD11487............$5.9521/2" #ELD11509............$6.953" #ELD11525............$8.95

No Air Shipments!Restricted Delivery on Gallon Size.

Sealtite Waxy Moisture Barrier ThatReduces Warping & Checking

Sealtite is used to slow the evaporation of moisture throughthe end grain of your lumber, thus reducing the checking andwarping as wood dries. Sealtite is a waxy substance that isbrushed on the wood and dries to create the moisture barrierthat can easily be scraped off when it is time to use the wood.

SEALTITE - Gallon #SK60000 ....................$15.95

No Air Shipments!

The Fooler was aptly named becausecustomers could not believe a throwaway brush could be of such highquality. The Fooler is a white bristlebrush that’s thicker than most. It’sdesigned to hold a lot of finish anddoes a good job flowing it on. It is,however, a throw away brush andshould not be used on fine finishesbecause it can shed. It is ideal forapplying stain, Danish oils, epoxies,resins, and bottom paints on boats.

Fooler Disposable Brush

FOOLER BRUSH2" #RT20000 ........................$3.953" #RT20001 ........................$4.954" #RT20002 ........................$5.95

High quality finishes require high qual-ity applicators. If you are brushing var-nish, urethane, lacquer or enamel, aBadger Style China Bristle brush willleave an ultra fine finish. These handmade Badger Hair style brushes havea hand formed chiseled edge thatleaves a much smoother coat thanother brush profiles. The shape alsohelps when cutting in.

Badger Brush

BADGER BRUSH 11/2" #RT10000 ................................$15.95BADGER BRUSH 2" #RT10001 ................................$16.95BADGER BRUSH 21/2" #RT10002 ................................$25.95BADGER BRUSH 3" #RT10003 ................................$28.95

Cliff from Waikoloa, HI – “The highest quality sanding/finishingproducts for the best price on the planet.Fast shipping without

ever having a problem. Aloha”

20


FINISHING

This is the polish that your great grandmother would have got-ten from the local cabinetmaker to keep her furniture lookingwonderful and lasting for generations. Craftsman FurniturePolish is a 100-year-old formulation that’s been handed downthrough generations of cabinetmakers and actually nourishesthe finish and helps prevent drying and cracking. It is recom-mended for any wood surface whether paneling, hardwoodfloors or cabinets.This is a top of the line furniture polish that’smade by furniture makers, for furniture makers. Money backguarantee.

CRAFTSMAN POLISH #CP01998......................................$10.95

Kramer’s Antique Improver is the result of years of studies involvingvery old wood finishing recipes and formulas. Hand formulated from14 all-natural ingredients, this product when wiped on with a softcloth, allowed to stand 5 to 15 minutes, then wiped dry, will put morebeauty and life back into your fine pieces than you ever thought pos-sible. Antique Improver restores natural finishes-paint, lacquer, var-nish, and shellac. It cleans, brightens and clarifies the finish, andhelps heal checking, hazing, cracking and rebounds the finish.

ANTIQUE IMPROVER #KM00108..............$16.95

Kramer® Antique ImproverA modern method of renovating an old cracked, or alligator finish,Qualarenu works equally well on old varnish, lacquer, or shellac fin-ishes. Qualarenu may be brushed, sprayed, or padded on an oldsurface. Ready to use out of the bottle, Qualarenu is simplybrushed on with the grain until the imperfections disappear.Qualarenu eliminates the need for restaining and refilling with pastewood filler. Before you decide to totally refinish that old piece of fur-niture, try fixing it with Qualarenu.

Qualarenu Restore Old, Cracked Finishes

QUALARENU (PINT) #B61100055 ................$16.95

HOWARD ProductsRestore And Enhance With These Fine Products

RESTOR-A-FINISHRestor-a-finish is a unique finish penetrat-ing formula that restores the original colorand luster to the finish while blending outminor scratches and blemishes. Restor-a-finish permanently eliminates white heatrings, water marks, scratches, color fade,oxidation, smoke damage, etc. Restor-a-finish cleans the surface and restores thefinish in one step without removing any ofthe existing finish.With a simple wipe-on, wipe-off process,most finished wood surfaces that seem toneed a complete refinishing job can berestored in a few minutes. Before strippingit, try restoring it.

Apply restor-a-finish with either a soft clothor 0000 steel wool. A cloth should beenough on minor scratches and abrasionswhile steel wool may be necessary on moreseriously damaged pieces.

RESTOR-A-FINISH - 8OZNeutral # RF1008......$8.95Maple Pine # RF2008......$8.95Golden Oak # RF3008......$8.95Walnut # RF4008......$8.95Mahogany # RF5008......$8.95Dark Walnut # RF6008......$8.95Dark Oak # RF7008......$8.95Cherry # RF9008......$8.95

Craftsman Polish100 Year-Old Formula Nourishes The Finish

This premium Padding Finish accentuatesthe grain and wood markings. It is used asa modern version of French Polish and isapplied in about 1/10th the time. Using apad, apply in the same manner as FrenchPolish either to raw wood or over any

cured shellac, varnish, paint or enamel fin-ish. It dries to the touch in a very short peri-od of time and leaves a lustrous finish.Qualasole Padding Finish is perfect fortouch up of French Polished surfaces.Compare a panel finished with any com-mercial varnish or lacquer to one finishedwith Qualasole Padding Finish and you’llagree that Qualasole is the only choice!

QUALASOLE PADDING FINISHQUART#B61100016..................$24.95

Qualasole Padding FinishAccentuates Wood Grain Better Than Any Other Product

WOOL LUBE #B7301365 ............$8.95

Wool-Lube Final Preparation For Wood FinishingWool Lube is a specially formulated lubricant thatprepares furniture before waxing or polishing. WoolLube can be applied with either steel wool orwet/dry sandpaper.This is a product that’s excellentfor removing pack marks, soiling or finger prints.After Wool Lube is applied the piece will be ready toaccept its finish. Wool Lube is non-flammable, non-toxic and water soluble.

No Air Shipments!

No Air Shipments!

No Air Shipments!

No Air Shipments!

No Air Shipments!

Don’t your musical instruments deserve the best?Behlen’s Violin Varnish is manufactured specifical-ly for use on fine instruments like guitars, violinsand other stringed instruments. It is a balancedblend of pure Super Blonde Orange ShellacFlakes, gum mastic, and gum sandarac.This com-bination produces a tough, hard, elastic and waterresistant film that offers the ultimate in protectionand functionality. No Air Shipments!

VIOLIN VARNISH - PINT#B60309055 ................................$24.95

Violin Varnish The PerfectBlend For Wooden Instruments

DEFTOIL EXTERIOR WOODFINISH NATURAL -QUART#DF18004..........................................................$12.95

Deftoil Exterior Wood Finish is formulated to protect exteriorwood surfaces from the harmful effects of sun and rain. It canbe used to protect gates, doors, patio furniture and picnictables. Dried out wooden items can be rejuvenated by thepenetrating and sealing qualities of the wood finish.Designed to resist mildew, repel water and resist UV rays, It’sideal for all outdoor projects. NOT recommended for use ontreated pine.

Deft Exterior Wood Finish

No Air Shipments!

Liberon French Polish is ideal for use on furniture, carved wood-work etc. Easy to use, it is ideal for beginners and will beautiful-ly enhance the wood’s natural finish. Using a good quality lac-quer brush or lint-free cloth apply a thin coat of Liberon FrenchPolish, working with the grain of the wood. Allow a drying timeof 3 to 4 hours then gently rub down the dried coat using UltraFine Steel Wool (grade 0000) for a smooth finish. Apply addi-tional coats as required, following the instructions above.Threeto four coats are usually sufficient to achieve a quality finish.

Liberon French Polish

LIBERON FRENCH POLISH 250ML #LL42000 ..........................................................$18.95

21


FINISHINGPINTOak #WF1128 ........$5.95Red Oak #WF1134 ........$5.95Birch #WF1106 ........$5.95Mahogany #WF1122 ........$5.95Maple #WF1124 ........$5.95Natural #WF1126 ........$5.95Pine #WF1130 ........$5.95Walnut #WF1142 ........$5.95Cherry #WF1110 ........$5.95Famowood Solvent

#WFS10000....$6.951/4 PINTBirch #WF41106 ......$3.95Mahogany #WF41122 ......$3.95Maple #WF41124 ......$3.95Natural #WF41126 ......$3.95Oak #WF41128 ......$3.95Pine #WF41130 ......$3.95Red Oak #WF41134 ......$3.95Walnut #WF41142 ......$3.95Cherry #WF41110 ......$3.95

Famowood WoodFiller

Famowood is one of the most respectednames in wood fillers. Along with our sand-ing and finishing products, a great wood filleris essential for making your projects looktheir best. Filling of small holes, dents andeven tearouts is no problem with-out signs ofshrinkage. Plus, it dries fast and may betreated just like wood-sand it, plane it, saw itand drill it. Nine different colors are availableso you can more closely match the color ofyour wood. Famowood is easily sanded andaccepts stain better than any other woodfiller on the market. For the real thing,Famowood is the only way to go.

Open grained woods like Mahogany can be difficultto stain and finish because the pore structureaccepts “too much”. Pore-O-Pac Paste Wood Fillertakes care of this problem. It fills the pores prior toany further staining or finishing coats. This fineblended mixture of silex, pigments and a suitablevehicle provides a smooth glass-like surface to fullycomplete your finishing process. Simply wipe onwith a rag, let settle and wipe off with a grainfiller/spreader. It’s just that easy! You’ve got to trythis filler for the best looking woodworking projectsyou can possibly have. Choose from three differentcolors. Use Naphtha to thin.

NAPHTHA (QUART)#B6500056..................$8.95

GRAIN FILLER / SPREADER#B9023000......................$7.95Burlap (36" x 36")#BL70000........................$2.49

PORE-O-PACMahogany #B7441256 ....$19.95Natural #B7440416 ..........$19.95Medium Brown Walnut#B7441156 ......................$19.95Pore-O-Pac Reducer#B7442006 ......................$14.95

Pore-o-Pac Paste Wood FillerFill Pores for Better Finishes

WOODFIL Epoxy is a two-part, hand mixableepoxy putty used to repair and rebuild realwood. Everything from nail holes to crackscan be repaired with Woodfil Epoxy. It com-pletely fills defect or damaged wood and willnot shrink. This product has a 15 to 25 min-utes work time and can be sanded in an hour.

WOODFIL EPOXY STICKWALNUT #KE10001 ............$9.95TEAK #KE10002 ............$9.95

Blendal Sticks from Mohawk Finishing are aneasy way to add or alter the color of a touch-up job. They are much quicker than powdertouch-ups and offer excellent opacity. All youhave to do is gently rub the stick in the repairarea and lightly feather out with your finger.Individual color sticks available online.

Putty KnifeWOOD HANDLEPUTTY KNIFE 11/4"SW28540......$5.95

WOODFIL Epoxy

Blendal Sticks

OAK #KE10003 ........$9.95CHERRY #KE10004 ........$9.95PINE #KE10005 ........$9.95MAPLE #KE10006........$9.95WHITE #KE10007........$9.95

BLENDAL 11 STICK ASSORTMENT#M3401200 ......................................$39.95

No Air Shipments!

Specified by the US Government, nationalrestoration centers, museums, architects andother professionals, Liquid Wood and Wood Epoxrepresent the greatest advance ever in woodrestoration history. They give new life to rotted,severely damaged windows, columns, frames,structural and decorative wood components.Liquid Wood consolidant reinforces, rebuilds andwaterproofs wood by hardening after penetrating.When dry, it can be painted or glued. After theLiquid Wood has been applied, the surface isready for Wood Epox. Wood Epox, a versatile,high-strength, no-shrink structural putty that isused to repair or replace damaged structures.This 2 part putty system can be used to fill cracks,holes or voids of any size or can be used toreplace missing parts of window sills, structuralcomponents, etc. After an item has been treatedwith this 2 part restoration system, it can besawed, nailed, planed and machined just likewood.

Wood RestorationRebuild, Repair And Replace Damaged Structures

WOOD EPOX A&B QUART#AB10000 ......................$59.95WOOD RESTORATION KIT#AB20000 ......................$39.95LIQUID WOOD A&BPINT #AB30000 ..........$39.95WOOD EPOX A&BPINT #AB40000 ..........$39.95LIQUID WOOD A&B QUART#AB50000 ......................$59.95

Liberon Burnishing Cream is designed to clean, reviveand rejuvenate highly polished surfaces such asFrench Polish, lacquers and varnishes. This creamcan also be used to remove haze and bloom frommost modern finishes. It will also clean ivory, tortoiseshell, mother of pearl, paper maché, brass inlays andfittings. Soak a lint-free cloth with Burnishing Creamand rub vigorously, going with the grain where possi-ble. Allow to dry for 2 to 3 minutes then buff with aclean, dry cotton cloth.

Liberon Burnishing Cream

LIBERON BURNISHING CREAM 8 OZ #LL11500 ............................................$16.95

Liberon Ring Remover will remove most white watermarks and heat marks from highly polished surfaces,including French polishes, lacquers, varnishes and mod-ern hard finishes. Shake well before use. Apply using aclean, lint-free cotton cloth and rub vigorously in a circu-lar motion over the mark until it is removed. Buff with aclean, dry cotton cloth then wax or polish as normal.

Liberon Ring Remover

LIBERON RING REMOVER#LL12700..........................................$15.95

Color Putty is an oil based filler that remainspliable and is easily matched to many oftoday’s name brand finishes. KLINGSPORoffers 17 colors of Color Putty which are eas-ily mixed to fit your finishing needs. 3.68 ozJars

White #CP00100........$2.95Natural #CP00102........$2.95Light Birch #CP00106........$2.95Fruitwood #CP00110........$2.95Butternut #CP00116........$2.95Cherry #CP00118........$2.95Light Walnut #CP00120........$2.95Honey Oak #CP00122........$2.95Redwood #CP00124........$2.95Br. Mahogany#CP00126........$2.95Dark Walnut #CP00130........$2.95Ebony #CP00134........$2.95Nutmeg #CP00136........$2.95Pecan #CP00138........$2.95Briarwood #CP00140........$2.95Teakwood #CP00144........$2.95

Color PuttyFill and Match Colors Easily

22


FINISHINGWater Soluble DyesSimply Mix With Water For The Perfect Dye

Trans-Tint Dyes

Klingspor’s Woodworking Shop con-stantly tries to offer products that are betterfor the environment. In this case, we havechosen to offer a powder dye that is watersoluble.These dyes, after being mixed withwater, can be applied with a rag, a brush oreven sprayed. What’s the difference in ourdyes and others? The number one differ-ence is that these dyes are water soluble.In other words, you mix the powder withwater. Many other stains are either alcoholor oil soluble - they have to be mixed withalcohol or oil. This can be quite messy asyou can imagine, not to mention that thesetypes of solvents are more harmful to youand the environment.Another advantage toour dyes is the particle size. Pigment parti-cles in stains are roughly one micron in sizewhile our dye particles are .001 microns.

This size particle allows the dye to pene-trate deeply into the wood fiber and cancolor the wood from the deepest black tothe brightest yellow without covering up thegrain of the wood.

EACH 1 OZ. BOTTLE MAKES 1/2GALLON OF DYE STAIN ..........$9.95 EA.

Medium Walnut............................#HS3262Antique Cherry Red....................#HS3265Antique Cherry Brown ..............#HS3266Light Red Mahogany ................#HS3267Antique Red Walnut....................#HS3269Light Oak......................................#HS3270Dark Oak ......................................#HS3271Honey Maple................................#HS3272Cherry ..........................................#HS3276Colonial Maple ............................#HS3277Antique Pine ................................#HS3279Turquoise Blue ............................#HS3281Scarlet Red ..................................#HS3282Cardinal Red................................#HS3283Orange..........................................#HS3284Medium Green ............................#HS3285Blue ..............................................#HS3289Purple............................................#HS3291Rosewood ....................................#HS3294

No Air Shipments!

OLD FASHIONED MILK PAINTCOLORS

Barn Red #MP001 ..$16.95Pumpkin #MP002 ..$16.95Mustard #MP003 ..$16.95Tavern Green #MP004 ..$16.95Soldier Blue #MP006 ..$16.95Pitch Black #MP007 ..$16.95Oyster White #MP008 ..$16.95Salem Red #MP009 ..$16.95Marigold Yellow#MP010 ..........................$16.95Bayberry Green#MP011 ..........................$16.95

Light Cream#MP018 ............................$16.95Lexington Green#MP012 ............................$16.95Federal Blue#MP013 ............................$16.95Buttermilk #MP015 ......$16.95Snow White #MP016 ......$16.95

Clear Coat #MP300 ......$15.95Antique Crackle #MP400 ......$19.95Extra Bond #MP200 ......$16.95Color Chart(FREE w/ Order) #MPCHART....$.99

If you’ve been around for a fewyears, you’ve probably seen thebeautiful texture and earth-tonecolors that milk paint produces.Thisis one of the original types of finish-es that was used on early Americanfurniture which makes it all the moreappealing. You’ll be able to createyour own reproductions with easeor just give your new projects aninteresting look. Simply mix themilk paint powder with water andyou’re ready to go. Each bagmakes one quart. Choose from 16colors, plus a clear coat, an antiquecrackle and an extra bond agentwhich helps adhesion to nonporoussurfaces. Give your projects some early American charm. Try Genuine Old FashionedHomemade Milk Paint.

These stains carry the Behlen “Master” label.They are a fast-drying (approximately 1 hour)premixed dye based stains that have atremendous degree of fade resistance andU.V. protection. Solar-Lux also incorporatesnon-grain-raising capabilities with deep pene-tration and translucency that enhances thewood grain patterns. They may be added tolacquers for a shading and highlighting effect.Solar-Lux can be applied to bare wood with arag, brush or sprayer, however they can onlybe applied over an existing finish by spraying.No Air Shipments!

Solar-lux Stains Alcohol Based Wood Stain

Medium Wheat#B50307A35 ..........$11.95Dark Green#B50308A75 ..........$11.95Light Yellow Orange #B50309A25 ..........$11.95Light Brown Mahogany #B5033A105 ..........$11.95Medium Red Mahogany #B5033A115 ..........$11.95Light Red Mahogany #B5033A125 ..........$11.95Cordovan Mahogany#B5033A165 ..........$11.95

Blood Red#B5033A285 ..........$11.95Golden Fruitwood #B5034A565 ..........$11.95Medium Brown Walnut #B5036A205 ..........$11.95American Walnut#B5036A235 ..........$11.95Brown Nutmeg#B5036A265 ..........$11.95Hickory#B5036A285 ..........$11.95Cherry#B5036A405 ..........$11.95

SOLAR-LUX STAIN - PINTS

GEL STAIN- PINTAMERICAN OAK #GF10824 ..................$11.95BROWN MAHOGANY#GF10825 ..................$11.95 CANDELITE#GF10826 ..................$11.95ANTIQUE WALNUT#GF10827 ..................$11.95COLONIAL MAPLE#GF10828 ..................$11.95 GEORGIAN CHERRY#GF10829 ..................$11.95

GOLDEN PINE#GF10830 ..................$11.95 JAVA#GF10831 ..................$11.95NEW PINE#GF10832 ..................$11.95NUTMEG#GF10833 ..................$11.95 PRAIRIE WHEAT #GF10834 ..................$11.95SATIN TOPCOAT #GF10835 ..................$11.95

Gel StainGel Stains are formulated with a combination of pig-ments, oils, and urethanes to produce a durable andbeautiful "hand-rubbed" finish. Gel Stains are oftenused on blotchy woods which are difficult to stainsuch as aspen, pine, birch, and maple. These easy-to-use stains simply wipe on with a cloth or appliedwith a foam brush (no spills or splashes).Gel Topcoat may be used to top coat any stain.Although Gel Stains contain urethane, Gel Topcoathas a higher content of urethane and may be used totop coat Gel Stains for more protection.

No Air Shipments!

Try our Trans-Tint Dyes.These areliquid concentrates that are solu-ble with either water or alcohol.Each 2 oz. bottle makes 1/2 gallonof tint dye. Transtint can be addeddirectly to clear finishes, except oilbased finishes, to make toners.

EACH 2 OZ. BOTTLE MAKES1/2 GALLON OF TINT DYE..................................$15.95 EA.

Honey Amber ................#HS6001

Golden Brown................#HS6002Reddish Brown..............#HS6003Medium Brown ............#HS6004Dark Walnut....................#HS6005Dark Mission Walnut ....#HS6006Dark Vintage Maple ......#HS6009Lemon Yellow ................#HS6020Bright Red......................#HS6021Blue ................................#HS6022Black ..............................#HS6023Green ..............................#HS6028Orange ............................#HS6025

Old Fashioned Milk PaintMake Beautiful Earth-Tone Colors With Texture

No Air Shipments!

23


FINISHING

Briwax is an all naturalproduct consisting mainlyof beeswax and carnaubawax that goes on smoothand easy and leaves adurable finish that is neverwaxy or artificial. Briwaxprotects your work, regard-less of the finish, by seal-ing it and reducing the con-stant effects of oxidation.Using Briwax on top of anyand all finishes will not only protect the fin-ish, it will add a depth and beauty to yourpiece that can only be accomplished bytime itself. Although Briwax can be buffedout with a soft cotton cloth, an excellentalternative is the natural bristle hand brush.

BRIWAX 16 OZ.Clear #BW11000 .....$15.95Light Brown #BW12000 .....$15.95Dark Brown #BW13000 .....$15.95Golden Oak#BW14000 .....$15.95Rustic Pine #BW10000 .....$15.95

BriWax Never Waxy Or ArtificialFeed-N-Wax

Lacacote Sanding Sealer - This shellacbased product is formulated to take advan-tage of the natural attributes of shellac suchas clarity, adhesiveness, sealing and fastdrying. On naturally oily woods, lacacotesanding sealer seals in the oils that typical-ly preclude certain finishes from drying. Italso effectively seals the oils and siliconesfrom polishes and stripper residues oftenfound in refinished woods. It’s a great sealerto use before wax and is also widely used inwoodturning applications.High Build Friction Polish - This shellacbased friction polish requires no sealingbefore application and gives an exceptional-ly high build which dries almost instanta-neously resulting in a beautiful, smoothsheen that compliments the natural beautyof the wood. A brilliant high gloss finish canbe achieved by first sealing the work withcellulose sanding sealer.Cellulose Sanding Sealer - Myland’sCellulose Sanding Sealer is a clear sealer,particularly suited for turned items, that

when used alone, dries to a matt, naturallooking color.When used prior to applicationto High Build Friction Polish, an exceptional-ly high gloss finish can be achieved.

Myland’s Wax - This unique formulationcombines the finest natural waxes availableincluding beeswax, carnauba and shellacwax in a toluene free carrier. Myland’s waxcan be used on all interior wood surfacesover virtually any finish. Myland’s is easy toapply and results in a shine that is lastingand lustrous.

LACACOTE SANDING SEALER -500 ml #MY10000............$14.95HIGH BUILD FRICTION POLISH -500ML #MY20000............$18.95CELLULOSE SANDING SEALER #MY30000 ..........................$16.95MYLAND’S WAX#MY40000 ..........................$14.95

MYLAND'S SAMPLER KIT:1 EACH OF THE ABOVE 4 ITEMS#MY49999 ..........................$49.95

Myland’s Polish & SealersPremium Products From A Trusted Name

Shellawax Friction PolishTurners - You’ll Love The Look Of This Finish

Shellawax has become the favorite among many of our latheturners who marvel at its simplicity. Just shake vigorously andspread over the piece, then buff with a cloth while the piece isspinning. Many other polishing techniques can be used withShellawax to add a high sheen gloss to that special project.

SHELLAWAX FRICTION POLISH#PI10000 .........................$24.95

Feed & Wax is a special blend of beeswax, carnauba wax and orange oil.It enhances the natural beauty and depth of grain in finished and unfin-ished wood. Use Feed & Wax after every Restor-a-Finish application andevery month or so afterwards to maintain the beauty of your wood finish.Polish all wood surfaces to a soft luster while leaving a protective coatingof beeswax and carnauba wax. Feed & Wax prevents the woodfinish from cracking and drying.

FEED-N-WAX - 16 OZ#FW0016 ............$9.95

FEED-N-WAX - 8 OZ#FW0008 ............$6.95

GREATFOR

TURNING

No Air Shipments!

No AirShipments!

Natural Beeswax is a traditional finish thatleaves a low sheen finish and is easy toapply. Beeswax is the perfect finish to usewhen you want to save the natural look of

the wood. The protective property offeredby a wax finish is that it makes the surfaceslicker and helps it reduce damage due toscrapes and scuffs.

BEESWAXNatural Beeswax#BE20000 ....................$14.95Dark Beeswax#BE10000 ....................$14.95

Beeswax Easily Applied For A Low Sheen Finish

Beeswax is very easy to use, either as a fin-ish or a polish. To make our own wax finish,simple grate or shred equal amounts ofbeeswax and turpentine in a suitable con-tainer.Allow a day or so for the beeswax andturpentine to mix into a polish and occasion-ally stir if possible.

Pure Beeswax Block

PURE BEESWAX BLOCK 200G#LL32500 ..............................$19.95

SALAD BOWL FINISH Pint #GF80000..............$12.95Quart #GF80001..............$18.95

Salad Bowl Finish A Food Safe Surface Finish

No Air Shipments!

Wooden bowls, spoons, countertops and butcherblocks need special attention when being finished.Only non-toxic materials can be applied to theseitems making them safe for use when in contact withfood.Behlen’s Salad Bowl Finish is specially formulat-ed with the application ease of an oil finish and thesheen building and resistance properties of a varnish.This tough, dry film contains only food-safe ingredi-ents so there’s no worry that once the surface is dry,after at least 72 hours, there will be no contaminants.Use this as the only finish on wood that will come intocontact with food. Several coats may be built with theSalad Bowl Finish by simply rubbing on with a lint-free cloth, much like applying oil finishes. Do notapply over any stains.Hint: Consider using the Salad Bowl Finish on chil-dren’s furniture, wooden puzzles or any other wood-en toys that young children may play with.Be sure to have a can of Bloxygen because thehandy Salad Bowl Finishes cure quickly.

Salad Bowl Finish The PerfectFinish For Woodenware In Contact With Food

BEHLEN SALADBOWL FINISH 8 oz. #B60300014 ....$8.95Pint #B60300015 ..$12.95Quart #B60300016 ..$18.95

No Air Shipments!

The perfect finish for anything ranging from wooden bowls towooden counter tops. Any surface that needs finishing, butmust be food safe, can be finished with Salad Bowl Finish. Itis easily applied like an oil and has the durability of a varnish.Surface becomes food safe 72 hours after drying.

24


FINISHING

ORANGE OIL Pint #GF30099..............$10.95

Orange OilAll Natural For Cleaning Any Type Of FinishOrange oil can be used on any finish and is excellent at removing everyday dirt and dust. It is always compared to lemon oil, but lemon oil con-tains mineral spirits. Orange oil is all natural and contains real orangerinds. Its fresh, pleasant scent makes it a pleasure to use.

Watco Rejuvenating Oil

WATCO REJUVENATING OIL - PINT#VR06605..........................$7.95

Cleans and restores oil finished wood. Restores beauty byremoving surface grime and creating a renewed luster and pro-tection. Will dissolve waxes so there is no need to strip waxbefore use.Use steel wool with this product to remove minor sur-face stains and scratches. *Not recommended on floors or exte-rior surfaces.

No AirShipments!

Regardless of the name, you’ll appreciate using Teak Oilon most any of your woodworking projects.This Teak Oil isan oil/varnish blend that lends itself well to finishing oilywoods like Teak, Rosewood, Cocobolo, Zebrawood,Ebony, etc. but will penetrate and dry hard on virtually anywood surface and offer a very durable, more heat resistantfinish. Try Teak Oil on surfaces like tabletops that mighthave some contact with heat - it will not become tacky asother finishes might. Go for durability, try this Teak Oil andsee the difference. TEAK OIL - QUART

#B7001416 ..........$12.95

Butcher Block oil is the preferred way to maintain wooden surfaces thatoften come into contact with food. It’s an excellent finish for salad bowls,cutting boards and wooden utensils. General Finishes Butcher Block Oilis manufactured from FDA approved mineral oil.

General Finishes Outdoor Oil is an exterior-rated penetratinglinseed oil. It contains UV stabilizers, mildew prohibitors, andtwice the oil contained in competing brands. We highly recom-mend GF Outdoor Oil for all outdoor wood projects, particular-ly wood furniture. It can be used by itself, over any stain, and onpressure treated wood.

BUTCHER BLOCK OIL - Pint#GF60000 ....................$9.95

This rare oil is the perfect matchfor woodenware such as bowls,knife handles, eating utensils andbutcher blocks. PRESERVE isnon-toxic and perfectly safeimmediately upon application.The deep penetrating qualities ofthis finish prevent food juices and odors from penetrating wooden-ware. A great one-step finish for all kitchen items.MASTER BLEND TUNG OIL-100% PURE produces a tough, hardsurface which is absolutely waterproof, abrasion resistant and non-toxic. Recognized for centuries as the finest of oil finishes, Tung oilpenetrates wood fibers and will not yellow as other finishes do.

Butcher Block OilMaintains Wooden Food Prep Utensils

Outdoor Oil PenetratingLinseed Oil With UV Stabilities

As one of the most impervious, durable oil finish-es, Tung Oil is the choice for many woodworkers.This Tung Oil, also known as China Wood Oil orNut Oil, from Behlen is pure unmodified Tung Oilwith no adulterating agents such as varnishes,soy oils or urethane additives. The advantage isa consistent quality finish that will build up to beextremely hard and durable. That means resist-ance to water, caustic acids, heat and mildew.Because this Tung Oil is so concentrated, it maybe thinned with up to four parts Mineral Spirits toone part Tung Oil before application.

Tung Oil A Preferred, Durable Oil Finish

BEHLEN TUNG OIL Pint #B74000035 ....$14.95

Quart #B74000036 ....$22.95Gallon #B74000037 ....$59.95

Preserve® Master Blend,WoodworkersTung Oil

OUTDOOR OIL - CLEARQuart #GF40000 ..........$18.95 Gallon #GF40001 ..........$46.95

TRU-OIL #BC23035 ....................$9.95

There is no better oil finish! TRU-OIL Gun Stock finish has been the profes-sionals choice for gunstock and furniture finishing for more than 30 years.Its unique blend of linseed and natural oils dries fast and will not cloud, yel-low or crack with age and resist water damage.TRU-OIL penetrates deeplyand forms a tough, clear hard finish that protects and enhances the beautyof fine woods. For a hand rubbed, satin luster, simply buff with steel wooland rubbing compound.

Tru-OilVersatile Enough For Gun Stocks Or Fine Furniture

Watco Danish Oil is a unique blend of pene-trating oil and varnish that stains, seals andprotects in one easy step. It penetrates deepinto wood pores to protect from within and toenhance the natural look and feel of the wood.The penetrating oil hardens in the wood andnot on the wood. Simply brush or wipe on fora traditional, hand rubbed appearance withoutany of the work.

WATCO DANISH OIL - QUARTNATURAL #VR06574......$12.95PINTNATURAL #VR06575......$9.95GOLDEN OAK#VR06515......$9.95 CHERRY #VR06525......$9.95FRUITWOOD #VR06545......$9.95

BLACK WALNUT#VR06535............................$9.95LIGHT WALNUT#VR06555............................$9.95

Danish Oil Maximum Absorbancy For A One-Step Finish

Teak Oil This Oil / Varnish Blend Penetrates And DriesHard On Virtually Any Wood

No Air Shipments! Restricted Delivery on Gallon Size.

No Air Shipments!

No Air Shipments!

No Air Shipments!

No Air Shipments!

No Air Shipments!

Liberon Finishing Oil

LIBERON FINISHING OIL 250ML#LL48500....................................................$15.95

Liberon Finishing Oil is a blend of high quality oils for use onall interior wood, turned woodwork and wooden toys. It is suit-able for use on work tops, kitchen tables and bathroom furni-ture and can also be applied to cork, stone and terracotta.Apply a coat of Liberon Finishing Oil using a brush or lint-freecotton cloth. Allow the oil to penetrate for up to 10 minutesthen wipe off all the excess with a clean lint-free cloth, beforethe surface dries enough to become sticky. Allow to dry for aminimum of 5 hours and apply more coats as required. Werecommend a minimum of 3 coats. The more coats appliedthe higher the sheen and the more durable the finish will be.

MASTER BLEND TUNGOIL- QUART#PF30000................$18.95

PRESERVE MASTERBLEND 8oz.#PF10000 ............$8.95

25


FINISHING

One step clear finishing is now as easy as applying agel stain with Behlen’s Master-Gel Clear Finish. Don’tworry about having to apply a first sealer coat, thisblended urethane finish seals and protects againstwater and alcohol making it suitable for many uses. Itsleveling properties give you a smooth, even finishthat’s almost fool-proof every time. Simply wipe onwith a rag over Gel Stain or any other stain. Quick drytimes of one hour allow you to sand and recoat in ashort period. No Air Shipments!

Mohawk’s Waterborne Pre-CatalyzedLacquer is a water reducible(no more than5%), self cross linking , low VOC emittingtechnology that has good color retention andis suitable for cabinet, millwork, furniture andother high traffic interior wooden surfaces.Waterborne pre-cat lacquer passes all KCMAtesting with as little as 2 coats and can beused as a self sealing system.

Petri Wipe-On Micro-Tropic Gel Polyurethane can be easilywiped on to almost any wood surface producing a beautiful andtough satin finish. This product contains a UV absorber allow-ing both interior and exterior application. No brushes or specialapplicators needed...just a clean lint free cloth.

Wipe-On PolyurethaneEasily Applied For Indoor Or Outdoor Use

BEHLEN MASTER GEL FINISH 12 Oz. Squeeze #B55030013 ........$10.9532 Oz #B55030016 ........................$20.95

ZINSSER BULLS EYE SHELLAC SPRAY#ZR00408..............................$6.95

Shellac is user-friendly and virtually goof-proof. It can beapplied with a brush, pad, sprayer, or wiping cloth. No elabo-rate instructions are needed, good results are almost guaran-teed, and mistakes are easily corrected. In spite of all the won-ders of 21st century clear finish chemistry, there is still no otherfinish that enhances the depth and natural beauty of woodgrain like shellac. Wood that has been finished with shellaclooks soft and natural, not plastic-coated.The finish will not yel-low or darken with age like polyurethanes, and it’s simple tomaintain. Shellac may be tinted with Solar lux stains orTransTint dyes. 3LB Cut

Bulls Eye All Natural Shellac

This is the same product described above, only in a spray can. It’sgreat for smaller items and touch up work. The spray applicationmakes it ideal to use as a sealer under various finishes.No Air Shipments!

Bulls Eye Shellac Spray

QUARTCLEAR #ZR00304........$12.95 AMBER #ZR00704........$12.95

GALLONCLEAR #ZR00301........$36.95 AMBER #ZR00701........$36.95

WATERBORNE PRE-CAT LACQUERSEALER (G)#M64024007 ..............................$42.95 SATIN/40 (G) #M64024407......$42.95SEMI GLOSS/60 (G) #M64024607 ..............................$42.95

ZINSSER BULLS EYE ALL NATURAL SHELLAC No Air Shipments!

Master-Gel Clear FinishAs Durable As Polyurethane

PETRI WIPE-ON No Air Shipments!POLYURETHANE GEL 16OZ#PG50008 ........................$12.95

POLYURETHANE GEL QUART#PG50032 ........................$18.95

The ONLY sanding sealer you will ever need,SealCoat offers the timesaving versatility ofrefined shellac in a pre-mixed 2 lb. cut 100%wax-free formula. It’s the perfect sanding sealerbecause it penetrates the surface, dries quickly,gives a rich tone to wood surfaces and since itcontains no waxes or stearates, SealCoat isguaranteed to be compatible with oil-basepolyurethanes, acrylic finishes, lacquers, cat-alyzed finishes and varnishes. SealCoat is greatfor wood floors – most floor finishing jobs canbe completed in just one day. It’s the perfectsealer for acrylic finishes because it brings outthe natural beauty of wood but will not turn yel-low with age. Wax Free 2LB Cut

ZINSSER BULLS SEAL COATQUART #ZR00854 ....$12.95GALLON #ZR00851....$36.95

Bulls Eye Seal CoatWaterborne Pre-Cat Laquer

No Air Shipments!

GLOSS #VR68041............$15.95 SATIN #VR68141..............$15.95

WATCO Wipe-On Poly provides the strength of polyurethaneprotection with a hand-rubbed beauty. With Wipe-On Poly,you can easily protect furniture with intricate and ornamentaldesigns, or with corners and crevices difficult to reach with abrush.· A superior polyurethane that is easily hand rubbed into

wood · Provides protection against water, stains, household

chemicals, and general wear and tear · Adds an additional level of protection to wood finished with

WATCO Danish Oil · Ideal for interior furniture, cabinets, doors, countertops, and

paneling · Available in gloss and satin sheens

Wipe On Polyurethane

WATCO WIPE ON POLYURETHANE - QUART No Air Shipments!

SEALACELL-CLEAR#GF10000(QT)..........................$17.95SEALACELL-CLEAR#GF10808(PT)..........................$13.95ARM-R-SEAL - QUARTSatin #GF20000............$16.95Gloss #GF20001............$16.95Semi-Gloss #GF20002............$16.95

The 2 step system from General finishes isideal for heavy wear areas such as floorsand table tops but is equally appropriate forcabinets and other furniture. It’s as toughand durable as polyurethane, yet easier toapply and it will never peel.The first step is the wood stain, or seal-a-cellif you choose to finish clear. It is a blend ofoil and varnish with the heavier part beingoil. This ratio allows the finish to penetratedeep into the wood surface effectively seal-ing it. The Arm-r-seal is a similar formulaexcept it is heavier in varnish. This gives thefinish coat its toughness and durability.With a pint of the stain, or seal-a-cell, and aquart of Arm-r-seal, you can properly finisha 100 square foot area with 1 seal coat and3 top coats.

Two Step Finishing SystemGet polyurethane performance without the plastic look

No Air Shipments!

Winner of Fine Woodworking's Best Overall ChoiceAward, High Performance Top Coat is the hardest,most durable consumer polyurethane top coat onthe market today. The specialized urethane modifi-cation provides superior toughness, durability andwater resistance necessary for high wear surfacessuch as table tops and cabinets. High Performanceis a fast drying, low odor, non-flammable alternativeto conventional lacquers. It is suitable for interiorwoodwork, case goods, furniture and cabinets.

High Performance Top Coat

HIGH PERFORMANCE TOP COAT- QUART SATIN #GF90101................................................$22.95

GLOSS/80 (G)#M64024807........................$42.95

26


FINISHINGClear Aerosols

Lacquer Finish

MOHAWK CLEAR AEROSOLS - 13 OZGloss #M1020410 ......$6.95Satin #M1020412 ......$6.95Flat #M1020411 ......$6.95Dead Flat #M1020414 ......$6.95Pre-Cat Aerosol Sealer #M1020413 ....................$6.95

The Pre-Catalyzed Clear Aerosols from Mohawk are the bestaerosol lacquers available. The surface dries very quickly andbuilds a very durable finish that adheres where other finishes will not.This product is very easy to use as a finish or touch up work. It’s avail-able in four sheens. No Air Shipments!

Ultra Classic Toners

Extra Dark Walnut#M1000209 ............................$6.95Dark Red Mahogany#M1000227 ............................$6.95Brown Mahogany#M1000229 ............................$6.95Perfect Brown #M1000249....$6.95Light Natural Oak#M1000321 ............................$6.95

Van Dyke Walnut#M1000353 ............................$6.95Natural Cherry #M1000382 ..$6.95Dark Red Walnut#M1000383 ............................$6.95Classic Cherry #M1000408 ..$6.95Light Golden Oak#M1000415 ............................$6.95Classic Walnut #M1007021 ..$6.95

Ultra Classic Toners utilize a non-fading, non-bleeding dye to provideexcellent clarity. Wood shades can be varied without imparting a"muddy" effect sometimes associated with pigment type toners. Thesesprays have excellent flow out and leave an alcohol and mar resistantfinish. No Air Shipments!

MOHAWK LACQUER FINISH - 13 OZGloss #M1020420......$6.95Satin #M1020422......$6.95Flat #M1020421......$6.95Tone Finish Clear Semi-Gloss

#M1020419......$6.95

If you want a clear nitrocellulose based lacquer finish and aneasy way to apply it, Clear Tone Finish is the way to go. This isthe best seller we have and is the perfect choice for top-coatingwood finishes. No Air Shipments!

No Blush Plus RetarderNo Blush Plus Retarder contains a special solvent designed toeliminate the hazy whiteness and cloudiness in you lacquer fin-ish that’s caused by trapped moisture. Simply spray on the sur-face in a thin coat and allow to it dry before applying next coat.No Air Shipments!

MOHAWK CLEAR LACQUERSANDING SEALER#M1020423..........................$6.95

Tone Finish Clear Lacquer Sanding Sealer fills in and levels sur-face scratches and burn-in repairs. It’s fast drying, easy sandingand has high solids for rapid build up. Seals in stains prior to finaltop coat to help speed up build up. No Air Shipments!

Sanding Sealer

Buy 12 ofsame for

$5.95 each!

Buy 12 ofsame for

$5.95 each!

Buy 12 ofsame for

$5.95 each!

Buy 12 for$5.95 each!

Behlen Aerosol Wiping StainBehlen’s wiping stainsare the same high qual-ity pigment stains usedin many furniture manu-facturing plants, andnow available in a sprayformat. The aerosolpackaging allows theuser to evenly and neat-ly apply a coat of stainto the project’s surface,much more so than the

typical rag dipped in stain. Once the sur-face is covered, use a rag or brush to wipedown the stain to reach the desired shade.When finished, turn the can upside downand spray for a couple of seconds to clean

out the nozzle and you are done.The nexttime you want to use the finish, just shakethe can and begin. Since you will nolonger have to stir the pigment out of thebottom of the can, color will stay more uni-form until the can is empty.

BEHLEN AEROSOL WIPINGSTAIN 13 ozDark Mahogany#B1150831 ....................$9.95Medium Brown Walnut#B1150853......................$9.95Cherry #B1150858 ........$9.95Red Mahogany#B1150873......................$9.95

BEHLEN SHADING/GLAZING STAIN 13 ozWhite #B1140202 ............$8.95 VD Brown #B1141478 ............$8.95

Behlen Aerosol Shadingand Glazing StainThe Behlen Aerosol Shading and Glazing stain shares manyof the traits of the Wiping Stain. It can evenly and neatly beapplied and can be used for faux and decorative finishes andaccenting.

METALLIC AEROSOL - 13 oz

Metallic AerosolThese metallic aerosols are ideal on wood, metal, ceramics and othermaterials. They are perfect for hobby and craft work and a perfect fitfor picture frame makers.

COLORED LACQUER ENAMEL Black Flat #M104F224................$6.95Black Gloss #M104G224 ..............$6.95White Satin #M104S202 ..............$6.95Black Satin #M104S224 ..............$6.95

Colored Lacquer EnamelThese colored lacquer enamels are perfect when the project calls foran opaque finish. The blacks are ideal in the ebonizing process.

No Air Shipments!

No AirShipments!

No Air Shipments!

No Air Shipments!

This spray can handle will turn any spray can into aspray gun. Spray paints, lubricants, adhesives andmore can all be more easily applied using the CanGun. No more tired, cramped or frozen fingers. Theergonomic design allows for even, continuousspraying. The Can Gun provides complete controlover the amount, speed and direction of all aerosols.

Can Gun Jet Spray Handle

CAN GUN JET SPRAY HANDLE #B1205000 ......................$2.95

Rich Pale Gold#M1040438 ..........$9.95Bright Gold#M1040439 ..........$9.95

Silver#M1041542 ..........$9.95Antique Gold#M1040109 ..........$9.95

MOHAWK NO BLUSH PLUS RETARDER AEROSOL#M1030475........................................................$6.95

Ron from Glenshaw, PA - "Your products andservice are great.And I may also add your prices

are very good.Keep up the good work."

27


FINISHING

QUALALACQ SANDING SEALERQuart #B61102006 ....$12.95Gallon #B61102007*....$32.95

QUALALACQ THINNERQuart #B61106316 ......$7.95Gallon #B61106317* ..$19.95

QUALALACQ LACQUERGloss (Quart) #B611100E6 $14.95Gloss (Gallon)#B611100E7*$34.95Satin (Quart) #B61107556..$14.95Satin (Gallon) #B61107557* $34.95LACQUER FLATTENER (QUART)Added to reduce the gloss of lacquers#B61001006 ......................$14.95LACQUER RETARDER (QUART)#B61001336 ......................$14.95No Air Shipments!Restricted Delivery.

Vinyl Sealer is designed for use under Mohawk Pre-Cat lac-quers in high contact areas where improved durability, waterresistance and adhesion are critical.No Air Shipments! Restricted Delivery.

VINYL SEALER - GALLON#M6108007 ............................$26.95

Pre-Catalyzed LacquerMohawk pre-catalyzed topcoat provides a premium quali-ty finish with excellent clarity. It features high moistureresistance, good flexibility, mar resistance and is muchmore durable than regular nitrocellulose lacquers. Whenused over our vinyl sealer, it produces an exceptional fin-ish system for furniture, kitchen and bath cabinets.Mohawk pre-cat lacquer is ready to spray right out of thecan. No Air Shipments! Restricted Delivery.

PRE-CAT LACQUER GLOSS#M61024807 ....................$28.95PRE-CAT LACQUER SATIN#M61024407 ....................$28.95

PRE-CAT LACQUER MATTE #M61024207 ....................$28.95PRE-CAT LACQUER SEMI-GLOSS #M61024607 ....................$28.95

Vinyl Sealer

SANDING SEALERWith this specially formulated Qualalacq

Sanding Sealer, you’ll get a smooth,

hard clear binding coat between the

wood and your lacquer top coats without

leaving a cloudy underbody.

THINNERThis thinner is to be used with the

Qualalacq Sanding Sealer and

Qualalacq Lacquer. It simply promotes

flowage of sealers and lacquers when

spraying

LACQUERThis top-of-the-line clear lacquer is high-

ly resistant to the strongest of alcohols,

water stains, moderate heat and abra-

sion impact. Use Qualalacq Lacquer on

your table tops and other high use areas

for the ultimate in protection. When you

combine the Qualalacq Sanding Sealer,

the Qualalacq Thinner and this

Qualalacq Lacquer, you’ve got a winning

combination that is the most used and

most trusted of all lacquer finishing appli-

cations.

DEFTHANE INTERIOR/EXTERIORPOLYURETHANE - QUARTGloss #DF10016 ..........$14.95Semi-Gloss #DF10017 ..........$14.95Satin #DF10018 ..........$14.95

Defthane PolyurethaneDefthane is a durable interior/exterior polyurethanethat’s ideal for hard use surfaces. It resist abrasions,marring, alcohol and other common household chemi-cals and will also outlast varnish 3 to 1. Defthane canbe used over other finishes and paints. Defthane sealsand finishes interior or exterior wood or metal heavy usesurfaces such as floors, furniture, doors and marine sur-faces above the water line.

No Air Shipments!

Brushing LacquerSlower Drying To MakeBrushing Easier

BRUSHING LACQUER - QUART#B61200156 ....................$14.95BRUSHING LACQUER THINNER#B61201006 ......................$9.95

Use Behlen Brushing Lacquer and you canhave the same high quality finish of high endfurniture makers without the spraying equip-ment. Behlen’s Brushing Lacquer is a highquality nitrocellulose lacquer with a specialsolvent added to slow the drying process.Make sure your surface is sanded to 320 or400 grit and free of dirt and dust. Apply witha high quality brush by “flowing on” the sur-face. This is simply loading the brush with allthe finish it will hold and allowing it to flow onto the surface while you are making yourstroke. Don’t brush like paint. AlthoughBehlen’s is ready to use right out of the can,you may want to thin 10 to 30% make the fin-

ish flow out a little easier. Two coats, in mostcases, are ideal and scuff sanding betweencoats with 400 grit sandpaper is recom-mended. No Air Shipments!

Qualalacq ProductsPerfect for Spray Systems

CLEAR WOOD FINISH - QUARTGloss #DF10704........$14.95Semi-Gloss #DF10804........$14.95Satin #DF10904........$14.95CLEAR WOOD FINISH - GALLONGloss #DF10701........$44.95Semi-Gloss #DF10801........$44.95Satin #DF10901........$44.95CLEAR WOOD FINISH - AEROSOLGloss #DF10713...............$6.95Semi-Gloss #DF10813...............$6.95Satin #DF10913...............$6.95

Deft Water Based LacquerDeft Waterborne Clear Wood Finish is acrylic technology,formulated to embody the positive qualities of Deft WoodFinish brushing lacquer without the environmental andflammability issues of the original solvent formulation. Deftis a self leveling formulation that dries crystal clear in 30minutes and can be applied with a brush, pad, roller orsprayer. It can be used on virtually any interior wood sur-face except for floors

CLEAR WOOD FINISH - QUARTGloss #DF10004.............$10.95Semi-Gloss #DF10005.............$10.95Satin #DF10006.............$10.95CLEAR WOOD FINISH - AEROSOLGloss #DF10007............$6.95Semi-Gloss #DF10008............$6.95Satin #DF10009............$6.95

Professionals and do-it-yourselfers know Deft Clear WoodFinish Lacquer is the brand they can trust for a superior,fast drying and easy to use finish for any interior wood fin-ish. Whether it’s as simple as a picture frame or asdemanding as an antique restoration, Clear Wood Finishmakes the job easier and the results more rewarding.The self leveling formula requires no sanding betweencoats , can be applied with a brush, pad or roller and dries5 times faster than polyurethane. It leaves a crystal clearfinish that resist yellowing over time. Clear Wood Finish provides a deep,rich finish that will enhance all interior wood surfaces except floors.

No AirShipments!RestrictedDelivery onGallon Size.

Deft Clear Wood Finish“The Original Brushing Lacquer”

No AirShipments!

28


FINISHING

Add this gun to your compressor and get excellent spray resultsevery time. This gun will yield high out put with low overspray.

This light-weight and durable die cast alloy gun with stain-less steel fluid needle and body has a fully adjustable spray

pattern. Model includes air adjustment knob with gauge.

HVLP Gravity Feed Gun

Many of our customers build woodeninstruments such as mandolins, violins,guitars and more. If you decide to, don’tput in all the time and then make a mis-take at the finishing point. Behlen’sStringed Instrument Lacquer is ideal formusical instruments. These type ofinstruments have to vibrate and move toproduce their certain sound. They needto be finished with a finish that will movewith the wood. Stringed instrument lac-quer is specially formulated to movewith the wood and remain somewhatflexible. This lacquer must be appliedover Behlen’s vinyl sealer.No Air Shipments!

STRINGED INSTRUMENT LACQUERQuart #B6111406..........$14.95Gallon #B6111407..........$46.95BEHLEN VINYL SEALER - Quart#B6111706 ............................$11.95STRINGED INSTRUMENT LACQUERAEROSOL #B1041406 ..........$9.95VINYL SEALER AEROSOL#B1028000 ..............................$7.95

Fuji recognized thatalthough there wereplenty of lower pricedHVLP turbine systemson the market today,there were none that combinedtop quality with all the features demanded byprofessionals. Features such as a powerful3-stage Turbine Motor, Metal Turbine Caseand Non-Bleed Spraygun with StainlessSteel Components. Plus extra features suchas Air Control Valve, High-Efficiency Aircapfor even less overspray.The Mini-Mite 3™ system replaces the FujiSuper Pro model which was a real favoritewith cabinet makers and professionals forwell almost 2 decades. Fuji installs the samepowerful 3-stage Ametek-Lamb Electric tur-bine motor as used in the Super Model.TheMini-Mite 3™ (MM3) is a professional sys-tem with a standard 3-stage turbine. By

'standard' we mean that the turbine does nothave the patented noise-reduction featureas seen on the Fuji Q-Series. However thenoise level is no more than any other stan-dard HVLP turbine.The MM3 Turbine devel-ops approximately 6psi. This is more thanenough pressure to spray all known coatings(when properly thinned) and all the newerwater-based coatings.

FUJI MINI MITE 3 SYSTEM#HVL-903 ..........................$499.95FUJI MINI MITE 4X SYSTEM4 stage version of the 3X#HVL-905 ..........................$679.95

When the Earlex Spray Station wasdesigned, Earlex wanted to offer a top qualityHVLP system at a great price. Two things awoodworker and DIY person look for. Withthe Earlex HVLP, you’ll achieve a profession-al looking finish that just can’t be producedwith a brush. It will also spray a variety of fin-ishes ranging from lacquers and sealers toenamels and acrylics. Because of its spray-ing versatility, it’s an ideal tool for the remod-eler or woodworker. The unit uses a 2 stageturbine that keeps constant flow of air goingthrough the gun providing an evenly sprayedfinish regardless of the viscosity. It has ahandy built in handle that allows it to easily bemoved around the shop or to a job site. Withthe adjustable aircap, the spray fan can beadjusted from 1" to 12". That adjustabilitycoupled with the high percentage of finishtransfer, you will have minimal overspray.TheEarlex Spray Station comes with a gunw/2mm needle, 1qt teflon lined cup, 13' hoseand gun cleaning kit.

EARLEX SPRAY STATION5000 SEMI-PRO#EA50000 ......................$299.95EARLEX NEEDLE & SEAL1.0MM FLUID TIP#EA50010 ....................$39.95

Fuji Mini Mite3 System

Buffcote LacquerHigh-Solids Buffcoat Lacquer Finish is ahigh quality clear nitrocellulose topcoatformulated to give a hand rubbed effectright out of the spray gun. Your finish willradiate the look and feel of a finely waxed,hand rubbed finish without all of the work.The slightly amber appearance of the fin-ish will add to the patina of the wood.Buffcoat offers a quick dry and quick buildalong with exceptional flow and leveling.This finish practically defines the term"user friendly." Ready to spray right out ofthe can. No Air Shipments!

BUFFCOTE GALLONMATTE #M6143207 ..................$34.95

SATIN#M6143407 ..................$34.95BUFFCOTE AEROSOL SATIN#B103030........................$9.95

Along the lines of the Stringed InstrumentLacquer are the two new Guitar Toner Lacquers.They can be used to add a controllable, evencolor to the guitar. Starcast Amber applies thebasic light colors of the guitar, especially thesound board. Encore Brown is used to tone theback and sides of the guitar, which are usuallydarker than the sound board. Encore Brown isalso used to create a sunburst effect around theedge of the guitar, whether acoustic or solid bod-ied. Often, Encore Brown is used at the edgeand then starcast amber is sprayed over thebrown, in a wider pattern, to create a two tonestarburst. With a little practice, the amateur luthi-er can apply a professional looking finish.

Guitar TonerLacquer

GUITAR TONER LACQUERENCORE BROWN #B1041201 ....................$9.95STARCAST AMBER #B1041202 ....................$9.95

Earlex Spray Station

2.5MM FLUID TIP#EA50025 ....................$39.95EARLEX SPRAY GUNCLEANING KIT#EA50026 ....................$14.95

HVLP GRAVITY FEED GUN #PC00001 ......$99.95

StringedInstrumentLacquer

CLEAR NITRO LACQUER - GALLONGloss #M61025807 ....$28.95 Semi gloss #M61025607 ....$28.95 Satin #M61025407 ............$28.95

NitrocelluloseLacquerClear nitrocellulose lacquer has been the trusted choiceof fine furniture makers and restorers for years. Theseare the preferred and best selling formulations in facto-ries and shops around the world. They are shipping atspray viscosity enabling you to spray directly from thecan and therefore saving you time and money. This is theperfect lacquer for refinishers and people doing spotrepairs. Dries quick and water clear.

No Air Shipments!Restricted Delivery

29


BOOKS

HOW TO CARVE A WOOD-SPIRIT IN A HIKING STICK#AV00202 ................$9.95

STEP BY STEP GUITARMAKING #FX33317.....$22.95

INGENIOUS JIGS #TP82964 ................$17.95

ROUTER JIGS &TECHNIQUES DVD#TP88961..................$19.95

ADIRONDACKCHAIR/ROCKER PLAN#VT50501..............$14.95

WOODTURNING, TWOBOOKS IN ONE#SM65835 ............$19.95

DUST COLLECTIONBASICS BOOK#WK10500 ..............$7.95

UNDERSTANDINGWOOD FINISHING (REV)#FX06808................$22.95

TOM WOLFE CARVESWOOD SPIRITS & WALKINGSTICKS #SF04413 ....$12.95

MAKE YOUR OWNWALKING STICKS#FX33201 ..................$17.95

WORKING WITH ROUTERS#FX34383 ............$24.95

TURNING GREEN WOOD#SM80891..............$17.95

WOOD STRIP CANOEBUILDING#SF05379 ..............$39.95

PRACTICAL FURNITUREDESIGN#TP50783 ............$24.95

BUILDING KITCHENCABINETS#TP84703..............$19.95

TRIM CARPENTRY2ND ED#TP89432..............$19.95

REFACING CABINETS#TP81979..............$19.95

BUILT-INS#TP88732..............$19.95

WOODTURNINGCHESSMAN#FX33737..............$24.95

ULTIMATE BAND SAWBOX BOOK#SM21935 ............$16.95

SHELVES CABINETS& BOOKCASES#TP50493..............$19.95

VIOLIN MAKING /2NDEDITION#FX34352..............$19.95

WOODTURNING, AFOUNDATION COURSE#SM81146..................$19.95

TURNING BOWLS WITHRICHARD RAFFAN#TP85084 ..............$24.95

THE BOW BUILDER'S BOOK#SF27896 ..................$34.95

INTARSIA WOODWORKINGPROJECTS#FX33393 ..................19.95

SHARPENING SIMPLIFIEDVIDEO DVD#EE20000 ..................$24.95

FINE ART OF CARVINGLOVE SPOONS#FX33744..............$24.95

500 WOOD BOWLS#SM04831 ............$24.95

TURNING PENS ANDPENCILS#SM81006 ............$17.95

30


MEASURE & LAYOUT

6 Piece Measuring SetYou get six essential measuring toolsat a bargain price in this kit. The kitincludes a 6" flat leg divider, 6" flat legoutside caliper, 6" flat leg insidecaliper, 6" angular depth gauge, 6"stainless rule with pocket clip and a 0"to 4" brass vernier caliper. 6 PIECE MEASURING SET

#PA79057 ..............................$24.95

The Pro Site Protractor takes error prone calculations out ofthe process of miter cuts. Simply set your saw to the angleyou read. Upside down or backwards, the reading isalways correct. This easy to read tool has two scales.The red scale and arrow shows the angle for mitercuts while the black arrow and scales show theangle to fit a single work piece to an angle. Madeof durable aluminum.

Pro Site Protractor

PRO SITE PROTRACTOR - 12"#SE67752 ....................$64.95

PRO SITE PROTRACTOR - 7"#SE11677 ....................$54.95

This is an ideal measuring tool for capturingdimensions and curves around irregularly shapedobjects. Both sides have clear and easy to readgraduations in both metric and imperial. It meas-ures 3/8" H x 1/4" W x 36" long.

36" FLEXIBLE CURVE#FF36000 ........................................$8.95

36" Flexible Curve

Every shop needs a combination square.This one will obviously measure 45s and90s, but it also has other functions. It can beused as both a depth gage and markinggage. With its built in vial, it functions as alevel. A built in, hardened scriber is alsoincluded. The square head is zinc die castand the blade is satin finished and is gradu-ated in 1/8" and 1/16".

12" COMBINATION SQUARE#GE81100 ............................$19.95

12" Combination Square

The scratch awl is not only handy for marking cuts, theyare also great for starting holes for screws and nails.

SCRATCH AWL #SW69122 ..................$5.95

Scratch Awl

Pencil/Compass Scribers are handy in carpentry andwoodworking. This heavy duty compass will mark a cir-cle up to 9" diameter. It can be used as a scribing guidefor edges and many other layout operations. Made of diecast metal and is rust resistant.

PENCIL COMPASS & DIVIDER #GE84200 ......................................$7.95

Great for workbenches, miter saw stations, tablesaw fences and countless jigs. These self stickingmeasuring tapes read either right to left or left toright. Once installed, they will save you a lot of timeand improve your repeatability.

6' TAPELEFT READING #WK1205 ............$9.95READING TAPE #WK1206 ............$9.95

Self Sticking Measuring Tape

This handy, compact square is ideal forchecking fence angles, saw blade anglesand other critical alignments or just theeveryday marking of lumber. The blademeasures 1" x 5 7/8" and is non-graduated.

6" ENGINEERS SQUARE #BH19058 ........................................$14.95

Engineer’s Square Pencil Compass & Divider

These marking knives feature hardened and tempered car-bon steel blades and rosewood handles. They are ideal forvarious marking applications, everything from tails and pinsto straight cut lines.

2" MARKING KNIFE RH #CN00112 ........$9.95

Marking Knives

Professional WheelMarking GaugeThe grain will not effect this marking gauge.

WHEEL MARKING GAUGE#WK28220 ........................$12.95

Perfect Butt Profile ScriberTraditionally a block of wood and a pencil or a pair ofcalipers are used to Scribe and fit worktops, shelving,flooring but how do you ensure that the scribe pointremains at a constant distance and angle from thescribing surface? The Profile Scriber holds a sprungpencil at the center of 4 interchangeable tracingwheels. Thus ensuring the scriber (pencil) remains atan equal distance from the profiling surface throughoutthe scribing process. The "Perfect Butt" Profile Scriberis designed to allow flush butting of worktops, kitchentops, shelves, flooring and other work pieces intouneven and irregular surfaces, and works wonders foroffsetting contours in creating templates and forms forbent-wood lamination. With the Profile Scriber, profilecopying is as straightforward and simple as drawing aline, and in many cases tracing transfer is eliminatedbecause you copy the profile directly onto the work-piece. Interchangeable wheel sizes: 11/8" - 2" - 23/4" -31/2" diameter.

PERFECT BUTT PROFILESCRIBER#MR00002 ............$26.95

M3 SquareThe M3 Square unique 3-D design enables you to marktwo face edges simultaneously even around moldededges. Clamp the M3 Square anywhere on the Sheffieldsprung steel 9" blade to perform deep-range markingwith precision and accuracy or transfer angles with theintegral lockable bevel gauge.This multifunctional tool willnot only lighten your toolbox, but also take much of thepractical hassle out of day-to-day woodworking opera-tions. Every M3 Square is handmade in England andchecked and tested to a tolerance within 1/100th of 1°.

M3 SQUARE #MR00001 ....................$39.95The Center Finding Rule is another measuringand layout tool no shop should be without. Oneedge is a standard ruler/straight edge that’s grad-uated in 16ths. The other side acts as a centerfinder and is graduated in 1/32". You’ll be able toquickly find the center point without any guessworkor trial and error. Two sizes are available

12" CENTER RULE#FF12000 ........................$8.95

24" CENTER RULE#FF24000 ......................$12.95

Center Rule

Accurately mark and measure any angle from zero to 180degrees both to the right and left. All components of thisprotractor are stainless steel and help keep it corrosionfree. It features finely etched numbers and degree marks,

6" beam andbrass lock knob.

STAINLESS STEEL PROTRACTOR #WK33860 ....................$14.95

Stainless Steel Protractor

MEASURE & LAYOUT


31

Corner TemplatesNo more wasted time searching for the right sizecan or jar lid when trying to mark off a cornerradius. Quick Corner Templates are easy to useand eliminate all the guess work. They are colorcoded, transparent and made of durable highstrength engineering resin. Select the desiredcorner radius or angle, slide the template on to thecorner and draw your line. It’s that simple

CORNER TEMPLATES SET OF 4 #BH27125..........................$24.95

The Centerpoint tape measure makes it very easy tofind the center point of your work, both in the shopand on the job. Whether it’s a desk top or a framedwall, finding the center has never been faster. Simplymeasure the distance using the top scale and thenfind the same reading on the bottom scale. It’s thatquick.The heavy gauge tape and tough plastic hous-ing make this tool as durable as it is useful.

If transferring detailed and accurate borders or edges ispart of your job, Accu*Scribe can make these operationsmore precise. Installers of countertops, cabinets, tile,trim, and stone will appreciate two knurled tightness andpositioning screws allowing the reach often needed forspecial applications. Make your mark with Accu*scribe!

ACCU*SCRIBE PRO #AS10000 .........$19.95

Here’s the speedy simple way to dupli-cate the profile that doesn’t quite trans-late by hand outlining. This 10" dualscale gauge has four non-slip surfacesfor sure handling. 186-cradled feelerssurround spindles, trim, and joineryensuring the perfect fit.

10" CONTOUR GAUGE #GE83700 ....................................$12.95

Contour Gauge Easily Duplicate Complicated Profiles

CENTERPOINT TAPE 16' #CF97161 ..................................$16.95

Accu*Scribe ProAccurately Transfer Edges And Borders

Gauge blocks are a quick way to many easyand accurate set ups. Whether checking thewidth of dados, bit or blade heights above thetable or any of a number of settings, theseblocks make it quick and easy. The set con-tains 1/8", 3/16", 1/4", 3/8" and 1/2" blocks.The blocks can be stacked to make otheraccurate measurements.

4" BRASS SET UP GAUGE BLOCKS 5PC #W9810..........................$14.95

Traditional marking gauges are a must in anyshop. The most practical is the beech gauge.It’s 100% beech and measures 8" overall. Thenext step up is the rosewood marking GAUGE.It has polished brass in the wear areas alongwith a brass, tightening knob. The best one weoffer is the rosewood double marking GAUGE.It has a standard marking pin on one side andtwo marking pins on the other. The double pinsare adjustable and ideal for marking mortise lay-outs. It too has polished brass in all of the wearareas.

A. MARKING GAUGE BEECH 135#CN00135 ............................$12.95

B. ROSEWOOD & BRASS#CN00138 ............................$27.95

Marking Gauge

A.

B.

Set Up Gauge Blocks

Tri ScribeTrammel Compass: Attach these trammelheads to any rule up to 3/32" thick, 2" widewith a scribe point at one end and a pencilat the other for the only flat lying compasson the market. Tri Scribe is designed to lieflat on your workpiece, making it inherent-ly stable, giving you precision and constantaccuracy for arcs and circles. (Diameteronly limited by length of rule)Marking Gauge – Mortise Gauge – PanelGauge: Adding a single or both Tri Scribeto your try-square/combination square willtransform it into a very accurate and stablemarking gauge or mortise gauge.

Attach to a longer blade try-square/combi-nation square to get great depth whenmarking panels with the same accuracyand ease that you mark mortises, tenon,rabbets etc.

TRI SCRIBE #MR00004 ......$19.95TRI BLADE #MR00005 ........$5.95

Point 2 PointHow do you divide a span of wood - or anyother material - into several equal partsinstantly without the use of calipers, a ruleror calculator? Just expand then contractthe Point 2 Point to give an instant visualguide to locations. Quickly work out thecorrect number and position of dowels,screws, pins, or calculate the maximumnumber of strips that can be cut from aboard. The Point 2 Point has a 4-pointbrass locking mechanism enabling you totransfer your locked measurements

POINT 2 POINT#MR00003 ......................$22.95

between boards or over large areas.Designed for both right and left-handeduse with a maximum expansion of 2ft.

12" T-SQUARE#PK36004 ..........................$79.95

A traditional story stick is typically a scrapof wood marked with common measure-ments for transferring to different workpieces. This new story stick is a modern,updated version of the time tested tool.At36" long, you’ll save time by not having tore measure and re mark every cut, holeor screw location. A different scale isengraved on each side of the stick. Oneside has a standard fractional scale whilethe other side has a 0-18"-0 center scale.An adjustable stop is used to reference thestick from the edge of the board, which istypically the zero mark. The stop can alsobe positioned anywhere along the length of

the stick so that it canbe used as a stoprule. Included are 4adjustable steel tabs with a micro slot andV notch for marking.

Story Stick

Drawing straight, accurate lines can be chal-lenging when relying on a tape measure and aquestionable straight edge. Each T-Square isan accurately machined, anodized and laserengraved aluminum beam featuring rules alongboth edges graduated in 1/32" increments andprecisely spaced 1 mm holes every 1/16".Simply choose your measurement, place yourpencil in the appropriate hole and slide the T-Square along the edge of the panel. It’s a greattool for laying out shelf pin locations and comeswith a wall mountable storage case.

12" T-Square

Centerpoint Tape Measure Quick And Easy WayTo The Middle Every Time

STORY STICK#PK36002 ..........................$34.95

DIGITAL FRACTIONAL CALIPER #IP10033 ............$29.95

Digital Fractional Caliper“Reads in both inches & metric”

This new 6" digital caliper is for the craftsman who needs the versatilityof measuring in fractions, SAE or metric. This one tool does it with thepush of a button. Graduations when measuring are inches, fractionsand metric and it can be zeroed out at any point. Includes caliper, bat-teries and a hard plastic storage case.


ROUTING

Produce a variety of joints with thisDovetail Jig from Porter cable. The jigwill cut through, half blind, rabbeted,dovetail dados and box joints on stockranging from 1/4" to 11/8". All tem-plates are from machined aluminum.This Dovetail Jig comes complete withcarbide bits, template guides and nuts,templates and operating manual.

PORTER CABLE 12" DELUXEDOVETAIL JIG#PC04212 ..................$169.95PORTER CABLE 11/32"STRAIGHT BIT / PC04212#PC43743 ....................$19.95

PORTER CABLE 7° DOVETAILBIT /PC04212#PC43776 ....................$19.95PORTER CABLEMINI DOVETAIL TEMPLET KIT#PC04215 ....................$79.95

Porter Cable 12" Deluxe Dovetail Jig

Porter Cable 12" ComboDovetail Jig Kit

Benchdog Featherboards

32

Benchdog Tandem FeatherboardsThe tandem Feather-Loc is the same as the regular Feather-loc, but 3 times as high. Itis ideal for thicker stock or boards that run on edge. Great for re-sawing.#BD00300........................................................$39.95

DOUBLE FEATHERBOARDSwithout slot adapter#BD20000..............................$24.95BENCHDOG MITER SLOTADAPTER #BD10100 ............$9.95SINGLE FEATHERBOARDwith miter slot adapter#BD00100..............................$23.95

Benchdog Feather-LocFeatherboardThis is the best feather board on the market.Adaptable to any .75 inch miter slot, the featherboard’s slot adapter expands in the slot whentightened down. The body of the board is atough polymer that will never wear out! Theexclusive "setup feather" makes setting the ten-sion fast, easy and repeatable. When you needa new feather board, this is the one to buy.

Produce a variety of joints withthis new dovetail jig kit fromPorter Cable. With this onekit, you’ll be able to producestandard and mini throughdovetails, standard and mini boxjoints(with additional bits), stan-dard and mini half blind dovetails,rabbeted half blind dovetails andsliding dovetails. Includes all neces-sary templates, four routerbits, four template guidesand 2 lock nuts.

PORTER CABLE12" DELUXEDOVETAIL JIG#PC04216 ......$199.95

Benchdog’s ProTopPhenolic Router Tableis made with durable3/4" phenolic materialthat provides a smoothflat surface. Workpieces glide effortless-ly across the smooth231/4" x 311/2" surfacewhile the built in dualtrack can be used withstandard miter gaugesor feather boards toany T – Bolt type jig.The cut out for the 1/4"insert (sold separately)rest on an innovative

No other router lift has this kind ofrange, speed and accuracy. Speakingof accuracy, how’s 0.001” adjustmentresolution with no need for an expen-sive digital read out. Prolift is designedfor demanding, heavy, daily use. It is adirect drive lift designed specifically forthe Porter Cable 7518 motor. Being adirect drive design, the possible compli-cations and slop associated with belts,chains and gears is eliminated.

Benchdog ProLift

BENCHDOG PRO TOP PHENOLICTABLE (40-101)#BD40101 ..........................$239.95

BENCHDOG PRO TOP PHENOLICTABLE/FENCE#BD40201 ..........................$340.00

BENCHDOG PROLIFT (40-150)#BD40150 ......................$329.95

BENCHDOG PROPLATE STANDARD GROUP 1PORTER CABLE 7518, 7519, 7538, 7539;MILWAUKEE 5625-20; TRITON TRA0018-1/4" X 11-3/4" X 1/4" ALUMINUM1-1/2" BIT OPENING #BD40120 ............................$59.95

BENCHDOG PROPLATE LARGE GROUP 1BOSCH 1619; FREUD FT2000;DEWALT 625; 8-1/4" X 11-3/4" X 1/4" ALUMINUM1-1/2" BIT OPENING #BD40123 ............................$59.95

10 point plate leveling system.A ProFence uses a heavy duty one piece aluminum framethat is fully machined on the face and bottom surfaces,ensuring your fence is flat, true and square. The top edgeof the fence has T slots that are handy for feather boardsand jigs. MDF sub fences adjust without tools and can beadjusted for zero clearance set ups. A bit guard and 21/2"dust collection is also included.

Circle Cutting Router JigsThese high quality circle cuttingjigs will enable your router to cutliterally hundreds of differentsized circles. The jigs are madefrom heavy duty acrylic andhave screen printed markingsthat are easy to read. Holesfrom 1" to 71/2" can be cut withthe small jig while the mediumand large cut holes from 7" to183/16" and 7" to 523/4". All jigscome with mounting screwsand starting pins.

ROUTER CIRCLE JIGA. SMALL #JT00400 ..........$29.95 B. MEDIUM #JT00270 ..........$39.95C. LARGE #JT00300 ..........$49.95

Base Plate Adapter Most router template guides are for routers with13/16" openings in the router base. If your router does not have this size hole, you canreplace the base altogether with the Jasper Base Plate Adapter.This router base enablesvirtually all routers to accept the standard size 13/16" template guides.

D. BASE PLATE ADAPTER #JT00500........................$16.95

A.

C.

D.B.

Benchdog Pro Top Phenolic Table/Fence

33

ROUTING


TURNLOCK SIGNPRO#WS12120 ............................$59.9511/2" EXTRA LETTERS#WS22010 ..............................$8.9921/2 EXTRA LETTERS#WS22020 ..............................$8.99

Turnlock SignPro Create Beautiful Signs With Your Router

ROUTER INLAY KIT #WS12080 ........$24.95SPIROCRAFTER #WS20000..........$42.95

LONG REACH ROUTER BITS 3PC 1/4" SHANKTungsten Carbide Tipped for a durable long lasting bit; 2-3/8" overall lengthis ideal for sign making; 1/4", 3/8", and 1/2" core box bits with 1/4" shank; 1/4"bit for 1.5" templates (Included with SignPro); 3/8" bit for 2.5" templates(Included with SignCrafter & SignPro); 1/2" for 'bold' 2.5" letters

#WS22100....................................................................$22.95

The SignPro helps you create profes-sional looking signs with your router.The adjustable clamping system allowsyou to rout signs up to 36" in length.SignPro includes a TurnLock BasePlate that will fit most popular routers.With TurnLock as an integral feature onthe Base Plate, bushing exchange istool-free, hardware-free, and takes onlyseconds. The templates, 164 in total,come in two sizes (11/2" and 21/2") andare self-spacing, so no measuringbetween characters is required. TwoTurnLock Bushings (7/16" and 5/8")and a 3/8" and a 1/4" Core Box bit areprovided. Now includes 40 verticalnumber templates!

This is a great way to store all of your cut-ting tools. Everything from very small bursto full size router bits can be stored. Eachtray measures 4.25" x 3" and interlockswith other trays creating a storage sys-tem. The 1/2" tray holds 8 bits. The 1/4"and 1/8" trays each hold 40 bits.

Bit Tray Easily store up to 40 bits!

BIT TRAY W/ 1/2" HOLES#FF03812 ................................$2.95

1/4" HOLES #FF03814 ........$2.951/8" HOLES #FF03818 ........$2.95BUY ANY 5 AND PAY $2.36 EA.

Creating great-fitting repairs or deco-rations on your wood pieces is a snapwith the Inlay Kit! Using the two pro-vided templates, you can choose frombowtie, heart, star, or circle shapes.The Inlay Kit includes a TurnLockBase Plate that will fit most popularrouters. Once in place, the Base Plateaccepts all Milescraft TurnLockBushings and accessories through asimple twist and lock action. There isno need to re-center the base, or to maintain more than one base and router set for tem-plate work.The kit includes two bushings and a 1/8" solid carbide down-cut Spiral bit, soyou can get to work immediately! Best when used with the Spirocrafter.

Spirocrafter Sketch, carve, and rout with one jig!This unique jig is excellent for sketching, carving and routing. By rotating the template inthe holding frame, a sequence of cuts or sketches can be overlapped, in the end makingone of many possible designs. Great for cabinet doors. Can be used to sketch designsfor hand carving or a plunge router can be used to router the design.

Router Inlay Kit Easily create great-looking inlays!

Porter Cable Template Guide Set

O.D. I.D. G.H.3/4" 21/32" 7/16"7/16" 11/32" 5/32"1/2" 13/32" 5/16"3/8" 9/32" 5/16"51/64" 5/8" 9/16"5/8" 17/32" 9/16"5/16" 1/4" 5/32"

PC TEMPLATE GUIDE SET#PC42000................................$39.95

Each guide is machined from a spe-cial aluminum for precision and longlife. Set includes the following:

Individual template guides available on www.woodworkingshop.com

DESIGN / INLAY KIT NOW GET BOTH FOR

$44.95#WS12070X

This inlay kit enables you and your router to cut pre-cise inlays. Whether decorative or structural, an inlaycan add a creative look to any project.

ROUTER INLAY KIT#FR15000..................................$34.95ROUTER INLAY KIT & TEMPLATE IncludesFreud Inlay Kit and Template (shown above)#FF40000 ..................................$42.95

Router Inlay Kit

The Butterfly Template, along with the inlay kit,enables you to cut butterfly keys in just minutes.Butterfly keys are both decorative and structur-al when cut in above a glue joint.Template has4 inlays ranging from 111/16" to 21/2" in length.

ROUTER INLAY KIT &TEMPLATE Includes Freud Inlay Kit(shown below) and Template#FF40000 ..................$42.95

Butterfly InlayTemplate

BUTTERFLY INLAY TEMPLATE#FF00004..........................$12.951" x 36 Yards 2-Sided Tape#CT31100 ..........................$6.95

PIONEER 12PC ROUTER BIT SET#PN12020 ......................$89.95

All bits are carbide tipped and Teflon coated for extrastrength and durability and come in a wooden stor-age case. Set consists of:3 Straight Bits: 1/4" x 3/4", 1/2" x 1-1/4", 3/4" x 1-1/4"1 Flush Trim Bit: 1/2" x 1/2"; 1 Round Nose: 1/2" x 1-1/4"; 1 Dovetail: 1/2" x 1/2" 14 DEGREE1 V Groove: 1/2" x 1/2"; 1 Round Over: 1/2" Radius1 Cove: 1/2" Radius; 1 Chamfer: 1-1/2" x 23/32"1 Rabbeting: 1-1/2" x 1/2"; 1 Roman Ogee: 1/4"Radius

Pioneer 12 Piece Router Bit Set

PIONEER 8PC RABBETING BIT SET #PN02000 ......................$29.95

PIONEER 1/2 SHANK TONGUE & GROOVE SET #PN84410 ......................$32.95

Rabbeting set consists of: 1/2" shank, 3/8" CH, 1-1/4" Diameter Bit6 bearings: 3/8", 1/2", 5/8", 3/4", 7/8" & 1"Bearings allow you to cut rabbets from 3/16" to 1/2"

Pioneer Tongue & Groove Cutter Bit 1/2" Shank. 1/4'' cutter width,1-5/8'' cutter diameter, 7/8" bearing. One pass on 3/4" stock leavesa 1/4" x 3/8" tongue. Remove a cutter and cut 1/4" groove.

Pioneer 8 Piece RabbetingBit Set

Pioneer Tongue and Groove Set

PIONEER 3PC 1/2 SH CABINET DOOR SET#PN03020 ......................$99.95

This raised panel door kit comes with a reversible rail andstile cutter set as well as an 18 degree panel bit. All bitsare 1/2" shank, carbide tipped and come in a wooden box.

Pioneer 3 Piece CabinetDoor Set

34


ROUTING

DOUBLE FLUTE STRAIGHT BITSOverall Diameter x Carbide Height04-100 1/8" D X 3/8" CH........................$13.9504-102 3/16" D X 1/2" CH ....................$14.9504-104 1/4" D X 1/2" CH........................$14.9504-106 1/4" D X 3/4" CH........................$15.9504-108 1/4" D X 1" CH ..........................$15.9504-111 7/32" D X 3/4" CH ....................$14.9504-118 5/16" D X 1" CH ........................$15.9504-126 3/8" D X 11/4" CH........................$17.9504-127 15/32" D X 3/4" CH ..................$19.95

04-132 1/2" D X 1" CH ..........................$16.9504-140 3/4" D X 3/4" CH........................$19.9512-100 1/4" D X 3/4" CH ......................$18.9512-102 1/4" D X 7/8" CH ......................$18.9512-106 5/16" D X 1" CH ......................$16.9512-108 3/8" D X 1" CH ..........................$17.9512-110 3/8" D X 11/4" CH........................$17.9512-116 1/2" D X 1" CH ..........................$17.9512-118 1/2" D X 11/4"CH ......................$17.9512-122 1/2" D X 11/2"CH ........................$19.9512-130 1/2" D X 21/2" CH........................$29.95

12-136 5/8" D X 1" CH ..........................$21.9512-142 5/8" D X 2" CH ..........................$24.9512-150 23/32" D X 11/4" CH ..................$25.9512-152 3/4" D X 1" CH ..........................$22.9512-156 3/4" D X 11/2" CH........................$23.9512-172 1" D X 11/4" CH ..........................$26.95

FLUSH TRIM "V" GROOVE BIT48-102 5/8" D X 1" CH ..........................$27.9548-112 5/8" D X 1" CH ..........................$28.95"Leaves a 1/8th" V Groove

TRADITIONAL BEADING BITS80-102 1/8" RADIUS X 9/16" CH ........$29.9580-104 3/16" RADIUS X 11/16" CH ....$34.9580-122 1/8" RADIUS X 9/16" CH ........$31.9580-124 3/16" RADIUS X 11/16" CH ..$34.9580-128 9/32" RADIUS X 3/4" CH ........$39.9580-130 3/8" RADIUS X 1" CH..............$44.95

BEADING BITS36-104 1/8" RADIUS..............................$28.95

Freud Premium router bits have many features and benefits. The smaller grain carbide used makes for a sharper bit for a longer time. Anti-kick back design allows for the deepestand safest cut possible. All Freud bits are computer balance that reduces the possibility of chatter while routing. Freud manufactures top quality cutting tools for every level of woodworker. Hundreds of other Freud profiles also available from Klingspor’s Woodworking Shop and online at www.woodworkingshop.com. NOTE: Red item numbers indicate a1/2" shank. All other shanks are 1/4".

DOUBLE FLUTESTRAIGHT BIT

FLUSH TRIM “V”GROOVE BIT

TRADITIONALBEADING BIT

BEADING BIT

MORTISING BIT

BOTTOMBEARING FLUSHTRIM BIT

TOP BEARINGFLUSH TRIM BIT KEY HOLE BIT

UP SPIRAL BIT DOWNSPIRAL BIT

ROUND NOSEBITS

SLOT CUTTERARBOR

MATCHED RAIL& STILE SETS

2+2 RAISEDPANEL BIT

SLOTTING CUTTER TONGUE &GROOVE BITS

DOVETAIL BIT

CHAMFERBIT

COVE BIT

CANOEJOINT BIT

LOCKMITER BIT

RABBETING BIT& BEARING SET

ROUNDINGOVER BIT

35

ROUTING


36-108 3/16" RADIUS............................$30.9536-110 1/4" RADIUS..............................$30.9536-112 5/16" RADIUS............................$32.9536-114 3/8" RADIUS..............................$32.9536-116 1/2" RADIUS..............................$36.9536-124 3/8" RADIUS..............................$33.9536-126 1/2" RADIUS..............................$44.95

MORTISING BITS16-100 1/2" D X 1/2" CH ......................$16.9516-104 3/4" D X 1/2" CH........................$17.9516-110 1/2" D X 1/2" CH........................$17.95

BOTTOM BEARINGFLUSH TRIM BITS42-100 3/8" D x 1" CH ..........................$16.9542-104 1/2" D X 1" CH ..........................$16.9542-106 1/2" D X 1/2" CH........................$16.9542-110 1/2" D X 1" CH ..........................$18.9542-114 1/2" D X 11/2" CH........................$20.9542-116 1/2" D X 2" CH ..........................$28.9542-118 3/4" D X 1" CH ..........................$23.9544-104 1/2" D X 1/2" CH........................$25.9544-108 1/2" D X 11/2" CH........................$37.95

TOP BEARING FLUSH TRIM BITS50-102 1/2" D X 1" CH ..........................$22.9550-104 5/8" D X 1" CH ..........................$25.9550-106 3/4" D X 1" CH ..........................$26.9550-112 1" D X 1" CH..............................$30.95

RABBETING BIT & BEARING SET32-504 1/2" CH ......................................$54.95FLUSH, 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"32-526 3/4" CH ......................................$58.95FLUSH, 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"

ROUNDING OVER BITS34-100 1/16" RADIUS............................$25.9534-104 1/8" RADIUS..............................$25.9534-108 3/16" RADIUS............................$30.9534-110 1/4" RADIUS ............................$30.9534-112 5/16" RADIUS............................$32.9534-114 3/8" RADIUS..............................$32.9534-116 1/2" RADIUS..............................$35.9534-120 1/4" RADIUS..............................$31.9534-124 3/8" RADIUS..............................$33.9534-126 1/2" RADIUS..............................$44.9534-127 5/8" RADIUS..............................$47.9534-128 3/4" RADIUS..............................$50.95

KEY HOLE BIT70-104 25/64" D X 3/16" D X 7/16" CH

....................................................$19.95DOVETAIL BITS22-104 1/2" D X 14˚ X 1/2" CH ............$16.9522-112 1/2" D X 14˚ X 1/2" CH ............$22.9522-122 1/2" D X 8˚ X 13/16" CH ..........$18.9522-124 1/2" D X 14˚ X 1/2" CH ............$18.9522-134 3/4" D X 14˚ X 3/4" CH ............$28.95

CHAMFER BITS40-100 23/32" D X 15˚ X 1/2" CH

....................................................$27.9540-101 11/4" D X 22.5˚ X 7/8" CH

....................................................$32.9540-102 15/16" D X 25˚ X 1/2" CH

....................................................$27.9540-104 11/2" D X 45˚ X 1/2" CH ............$30.9540-114 13/4" D X 45˚ X 5/8" CH ............$34.9540-118 21/2" D X 45˚ X 1" CH ................$59.9540-206 111/32" D X 30˚ X 3/4" CH

....................................................$43.95

COVE BITS30-098 1/8" RADIUS..............................$28.9530-102 1/4" RADIUS..............................$31.9530-104 3/8" RADIUS..............................$34.95

30-112 3/8" RADIUS..............................$33.9530-114 1/2" RADIUS..............................$35.95

CANOE JOINT BIT99-017 CANOE FLUTING BIT/ 1/8" RADIUS

....................................................$52.9599-018 CANOE BEADING BIT/ 1/8" RADIUS

....................................................$47.95

LOCK MITER BIT99-034 LOCK MITER 1/2" TO 1" STOCK

....................................................$93.9599-035 LOCK MITER 3/8" TO 3/4" STOCK

....................................................$79.95UP SPIRAL BITS75-100 1/8" D X 1/2" CH ......................$19.9575-101 3/16" D X 3/4" CH......................$19.9575-102 1/4" D X 1" CH ..........................$19.9575-104 5/16" D X 1" CH........................$47.9575-106 3/8" D X 11/4" CH........................$45.9575-108 1/2" D X 11/4" CH........................$58.9575-109 1/2" D X 2" CH ..........................$69.95

DOWN SPIRAL BITS76-100 1/8" D X 1/2" CH........................$19.9576-102 1/4" D X 1" CH ..........................$19.9576-106 3/8" D X 11/4" CH........................$44.9576-108 1/2" D X 11/4" CH........................$50.95

ROUND NOSE BITS18-100 1/16" R X 3/8" CH......................$19.9518-102 3/32" R X 3/8" CH......................$19.9518-104 1/8" R X 3/8" CH........................$18.9518-106 3/16" R X 3/8" CH......................$21.9518-108 1/4" R X 3/8" CH........................$22.9518-110 5/16"R X 7/16" CH ....................$26.9518-112 3/8" R X 7/16" CH......................$25.9518-113 1/2" R X 3/4" CH........................$42.9518-114 1/8" R X 3/8" CH........................$25.9518-115 3/16" RX 3/8" CH ......................$28.9518-116 1/4" R X 11/8" CH........................$33.9518-122 3/8" R X 11/4" CH........................$40.9518-126 1/2" R X 11/4" CH ......................$53.95

SLOT CUTTER ARBORS60-100 SLOT CUTTER ARBORS

5/16"D X 25/64"AH......................$7.9560-102 SLOT CUTTER ARBORS

5/16"D X 25/64"AH......................$7.95

SLOTTING CUTTERS56-100 SLOTTING CUTTER

2" D X 5/16" BD X 1/16" CH ....$18.9556-108 SLOTTING CUTTER

2" D X 5/16" BD X 1/8" CH ......$18.9556-109 SLOTTING CUTTER

2" D X 5/16" BD X 5/32" CH ....$18.9556-112 SLOTTING CUTTER

2" D X 5/16" BD X 1/4" CH ......$18.95

TONGUE & GROOVE BITS99-036 ADJUSTABLE 2 PC. TONGUE

& GROOVE SET ......................$79.95

MATCHED RAIL & STILE SETS99-260 7/32" RADIUS COVE SET ......$99.9599-261 13/64" RADIUS DOUBLE OGEE SET

....................................................$99.95 99-263 9/32" RADIUS COVE SET ......$99.95

2+2 RAISED PANEL BITS99-513 7/16" RADIUS DOUBLE OGEE

....................................................$79.9599-515 18˚ BEVEL ................................$79.9599-516 17˚ BEVEL ................................$94.9599-518 11/2" RADIUS COVE..................$94.9599-520 25/32" & 5/32" RADIUS OGEE

....................................................$94.95

The Colt palm router is the first small router to offer power, pre-cision, versatility and comfort. It is ideal for many routing appli-cations. Applications typically done with a laminate trimmer tojobs done with full size routers can now be done with the Colt.A variable speed control adjusts’ the speed anywhere 16,000 to35,000 rpms. The ergonomic, palm grip design makes the Coltthe most comfortable router in its class, and for enhanced com-fort, it features a soft grip. Start up torque is minimized thanksto the soft start feature, and the Bosch exclusive finger sup-port pockets on the front of the base provide added stability.At 3.3 lbs, its weight makes it ideal for many vertical applica-tions such as trimming out hinge mortises on doorjambs. Witha superior motor, versatility and ergonomics, Bosch Colt PalmRouter puts routing power and precision in the palm ofyour hand.

Bosch Colt VS Palm Router

The power to weight ratio on the T-4 plunge routermakes it a great choice for lighter applications in theshop or on the job site. A 6.6 amp motor and variablespeed from 11,500 to 32,000 rpms make it a very ver-satile router. It is ideal for various applications from

edge work and inlay to use on a dovetail jig.Since it weighs only slightly more than apound, it can easily be removed from thebase and used in power carving/die grinder

type applications.The T-4 kit comes completewith router, case 6mm, 1/4" and 8mm col-

lets, 5/8" guide bushing, edge guideand 13/8" hose adapter

TREND T4 ROUTER#TD40000 ....................$109.95

BOSCH COLT VARIABLESPEED PALM ROUTER#BO00020 ....................$129.95 1 SPEED PALM ROUTER#BO00021 ......................$99.95

BOSCH ROUND SUBBASE#BO24170 ......................$11.95

Trend T4 Router

This is the most popular table router on the market. The3.25 hp motor and speed settings of 10, 13, 16, 19 and 21thousand, this router will easily handle any type of cut-ters.

3.25HP 5 SPEED ROUTER#PC07518 ................................$349.95MOTOR ONLY #PC75182........$299.95PORTER CABLE 1-3/4 HP VS ROUTER690LRVS ##PC00699 ..................$159.95

Porter Cable 3.25 HP5 Speed Router“#1 Router for Router Tables”

Route-A-Corner templates are designed to aidthe woodworker in routing smooth, accurate andprofessional looking corners. The templatescome in handy when routing uniform corners onlarge, hard to handle or stationary projects suchas countertops, tables and built-ins. The setincludes convex, concave and 45 degree angledtemplates.

Route-A-Corner Set

ROUTE-A-CORNER SET (6PC) #BH27000 ......................................................$49.95

36


BLADES

Freud Saw BladesA world leader in cutting tool technology, Freud has earneda reputation for producing quality woodworking tools andaccessories.With several unique design features, Freud sawblades are among the longest lasting, best performing in theindustry. Choose from a variety of blade designs, sizes andunique coatings to select the best blade to suit your project.Freud saw blades – Precisely what you need. 12" X 96T ATB PERMA-SHIELD -

Freud’s premium cut off blade#FR01678 (LU85R012)........$124.95

12" X 72T SLIDING CROSSCUT- Freud’s premium sliding miter blade#FR91003 (LU91R012) ............$79.95

CROSSCUTTING RADIAL ARM/ SLIDING MITER

10" X 60T SLIDING CROSSCUT -Fine finish blades for sliding miter &radial arm saws#FR00091 (LU91R010) ..........$64.95

10X30 TK GLUE LINE RIP - the only thin kerfripping blade that delivers true glasssmooth rips every time#FR75010 (LM75R010) ....................$59.95

10X24T RIP FLAT - For smooth, heavy dutyfast ripping #FR01486 (LM72R010)$59.95

10 X 24 RIP PERMA-SHIELD- Thin kerf Heavy Duty ripping blade #FR01677 (LU87R010) ..................$44.95

10" X 30T GLUE LINE RIP- heavy duty rip/excellent finish#FR74010 (LM74R010) ..................$69.95

RIPPING BLADES

10" X 80T DBL SIDED LAMIN#FR00097 (LU97R010) ..............$94.95

10" X 80T ONE SIDED LAMIN#FR00098 (LU98R010) ..........$94.99

LAMINATES / PLYWOOD

10" X 80 ULTIMATE CUT OFF- #FR01615 (LU85R010)......$84.95

10" X 80T ULTIMATE CUT OFFTHIN KERF -#FR35619 (LU74R010)..........$69.95

10" X 50 COMBINATION BLADE - #FR00810 (LU80R010)..........$84.95

10" X 60T CROSS CUT - #FR01060 (LU73M010) ......$64.95

CROSSCUT TABLE SAW

10" X 80T TK PLYWOOD- Thin kerfplywood and melamine blade #FR04164 (LU79R010) ......$74.95

10" X 40 FUSION COMBO BLADE-40 tooth, full kerf combination blade#FR00410 (P410) ................$99.95

10"X50T PERMA-SHIELD COMBOBLADE - Heavy Duty combo blade#FR01554 (LU84R011) ..........$69.95

10" X 50 COMBINATION BLADE - Thinkerf premium combination blade#FR00083 (LU83R010) ..........$54.95

RIPPING & CROSSCUTTING BLADES

10" X 60T COMBO BLADE- long life comboblade for hardwood or man-made materials #FR00082 (LU82M010) ....................$39.95

DIABLO 7-1/4" X 24 BLADE - Thin kerfcombination blade#FR19091 (D0724A) ........................$9.95

DIABLO 7-1/4" X 40 BLADE - Thin kerfcombination blade#FR19107 (D0740A) ......................$15.95

The tablesaw is an essential toolin woodworking and carpentry.Tablesaws excel at ripping woodto width, but they can do so muchmore. Outfitted with the rightaccessories and jigs, a tablesawcan cut accurate joinery, cutbevels, raise panels and even cutcoves for crown molding. Learnhow to make this versatile toolwork for you as well as all thenecessary maintenance and tuneup procedures. 220 pages

These Calibration and Sanding Disks are a realtime saver when aligning a saw.They are preci-sion ground and extra thick for absolute balanceand flatness. When mounted in your table saw,you can get an accurate angle reading using asquare or various other measuring devices.Since the disk has no teeth, the reading andresults will be much more accurate than thosetaken on a saw blade. After your alignment isset, replace the disk with a saw blade. The diskcan also be used for disk sanding. Simply applya PSA sanding disk and you have a practicaland affordable disk sander.

FREUD 10" CALIBRATION &SANDING DISK#FR00010 ....................$29.95

FREUD THIN KERF PLYWOOD48TPI /TS55 (LU79R006M20)#FR06200 ......................$49.95

FREUD THIN KERF GENERAL28TPI /TS55 (LU86R006M20)#FR06201 ......................$37.95

FREUD THIN KERF RIP 14TPI/TS55(LU87R006M20)#FR06202 ......................$29.95

Freud 10" Calibration& Sanding Disk The Freud Pro Stacked Dado Set has negative

hook angles that provide flat groove bottomsand virtually all splinter free cuts. It has 2outside blades with 5, 2 sided chippers andall have the anti-kickback design. Thisresharpenable set will cut grooves from 1/4"to 13/16" in 1/16" increments.

6" ECONO-PRO DADO#FR02060 ................................$89.95 8" ECONO-PRO DADO#FR02080 ................................$99.95

Freud Econo-Pro Dado

The Freud 500 Series Dado Set cuts everything fromveneered plywood to laminates and solid wood andleaves all with not only a chip and splinter free finish,but also with a completely flat bottom. It was the first toinclude a 3/32" chipper to give it the flexibility of anadjustable dado to help deal with today’s undersizedplywoods. With the 3/32" chipper, the dado can beadjusted to 1/32" increments.

6" SUPER DADO SET#FR05060 ..........................................$179.95 8" SUPER DADO SET#FR05080 ..........................................$199.95

Freud has developed a method of creating perfectlysquare, flat-bottom box joints, on a table saw withoutusing a Dado Set or Saw Blade. The SBOX8 BoxJoint Cutter Set makes box joint construction easy,producing strong, accurate joints without shims orawkward adjustments. This patent pending innova-tion enables users to produce perfectly square, pre-cise box joints quickly and cleanly the very first time-and every time.The set is easy to use, simply install the8" diameter, 5/8" arbor blades on a table saw with theblades back to back for 1/4" box joints, or face to facefor 3/8" box joints.

8" BOX JOINT BLADE SET #FR39686 ..............$94.95

Freud Super Dado Set8" Box Joint Blade Set

Jet’s tenoning jig has fully adjustable stops for securely holdingstock on end while cutting tenons at various angles and thick-nesses. It can be used in any standard 3/4" x 3/8" miter trackand also has a removable T. The Jet tenoning jig can be usedon both left and right tilt table saws.

JET TENONING JIG WITH QUICK RELEASE#J708295 ..............................................$109.95

Jet Tenoning Jig withQuick Release

GUIDE TO TABLESAWS#TP50110..........................$19.95

CompleteIllustrated Guide

to TablesawsEven if you spend hundreds or thousands ofdollars on a table saw, a super smooth, burnfree cut is not guaranteed. Even the bestsaws need to have the blade and fence prop-erly aligned to the miter slot. Tape measuresand straight edges will get close, but won’tallow you to get the best from your blade andsaw. The Woodpeckers Saw Gauge makesthe task faster, easier and much more accu-rate. Simply take the gauge out of the box, noassembly required, and drop it in the miter slot.By sliding the gauge up and down the blade orfence, you’ll know exactly which way to makethe adjustment.

Woodpeckers Saw Gauge

THESE BLADES FIT THE FESTOOL TS55 CIRCULAR SAW

SAW GAUGE #PK36008 ................$79.95


37

BLADES


38


14" BANDSAW TIRE #CI00014................$20.95

72" Blades 72 X 3/16 X 10 TPI #CI723160..............$18.9572 X 1/4 X 6 TPI #CI721460..............$18.9572 X 3/8 X 4 TPI #CI723840..............$18.9572 X 1/2 X 4 TPI #CI721240..............$19.95

80" Blades 80 X 3/16 X 10 TPI #CI803161..............$20.9580 X 1/4 X 6 TPI #CI801460..............$20.9580 X 3/8 X 6 TPI #CI803860..............$20.9580 X 1/2 X 4 TPI #CI801240..............$21.95

93-1/2" Blades For Most 14" Bandsaws93-1/2 X 1/8 X 14 TPI #CI931814 ............$24.9593-1/2 X 3/16 X 10 TPI #CI935361..............$22.9593-1/2 X 1/4 X 4 TPI #CI932144..............$21.9593-1/2 X 1/4 X 6 TPI #CI931406..............$21.9593-1/2 X 1/4 X 10 TPI #CI931410..............$21.9593-1/2 X 3/8 X 4 TPI #CI931238..............$21.9593-1/2 X 3/8 X 6 TPI #CI932386..............$21.9593-1/2 X 1/2 X 4 TPI #CI932124..............$22.9593-1/2 X 1/2 X 2 AS #CI931222..............$23.9593-1/2 X 3/4 X 2-3 VPC #CI931223..............$27.9593-1/2 X 3/4 X 10 TPI #CI931234..............$26.95

105" Blades For 14" w/ riser block extensions.105 X 1/8 X 14 TPI #CI105814 ............$26.95105 X 3/16 X 10 TPI #CI105361..............$24.95105 X 1/4 X 4 TPI #CI105145..............$21.95105 X 1/4 X 6 TPI #CI105146..............$21.95105 X 3/8 X 4 TPI #CI105384..............$22.95105 X 1/2 X 3 TPI #CI105123..............$23.95105 X 1/2 X 4 TPI #CI105124..............$23.95105 X 1/2 X 2 AS #CI105122..............$24.95105 X 3/4 X 2-3 VPC #CI105323..............$29.95

111" Blades111 X 3/16 X 10 TPI #CI111316..............$24.95111 X 1/4 X 4 TPI #CI111144..............$24.95111 X 1/4 X 6 TPI #CI111146..............$24.95111 X 3/8 X 6 TPI #CI111386..............$24.95111 X 1/2 X 2 AS #CI111122..............$25.95111 X 1/2 X 4 TPI #CI111124..............$24.95111 X 1/2 X 6 TPI #CI111126..............$24.95111 X 3/4 X 2-3 VPC #CI111423..............$30.95

133" Blades For 18" Bandsaws133 X 3/16 X 10 TPI #CI133316..............$26.95133 X 1/4 X 6 TPI #CI133146..............$25.95133 X 3/8 X 4 TPI #CI133384..............$26.95133 X 1/2 X 4 TPI #CI133124..............$27.95133 X 1-1/4 X 3/4 TPI #CI133114 ............$43.95

OLSON COPING SAW#OL63510............................................$12.95FINE CUT COPING BLADES 20 TPI#OL30300..............................................$3.95STANDARD CUT COPING BLADES 15TPI#OL30400..............................................$3.95FAST CUT COPING BLADES 10TPI#OL30600..............................................$3.95

Scroll Saw BladesDOUBLE TOOTH - cuts fast, leaves smooth surfaceSKIP/REVERSE - smooth, splinter free finish on top & bottomSPIRAL TOOTH - cuts in all directionsCROWN TOOTH - cuts on up & down stroke

#1 5" PLAIN 30 DOUBLE TOOTH#OL43400..............................................$4.95#3 5" PLAIN 23 DOUBLE TOOTH#OL43500..............................................$4.95#5 5" PLAIN 16 DOUBLE TOOTH#OL43600..............................................$4.95#12 5" PLAIN 10 DOUBLE TOOTH#OL43900..............................................$4.95#3,5,9 5" PLAIN DOUBLE TOOTHASSORTMENT PACK #OL49300 ....$12.95

5" PINNED SCROLL BLADE 9/5 REVERSETOOTH #OL42003................................$3.955" PINNED SCROLL BLADE 18.5 SKIPTOOTH #OL42401 ............................$3.95#2 5" 28/21 SKIP/REVERSE-TOOTH#OL44002..............................................$4.95#9RG 5" PLAIN 12/9 SKIP/REVERSE TOOTH#OL45502..............................................$4.95#7RG 7" PLAIN 10/7 SKIP/REVERSE TOOTH#OL45702..............................................$4.95#9RG 9" PLAIN 8/6 SKIP/REVERSE TOOTH#OL45902..............................................$4.95#2,5,7 5" PLAIN SKIP-TOOTH ASSORT-MENT PACK#OL49400......................$12.95#0 5" PLAIN BLADE SPIRAL 46 TOOTH#OL46100..............................................$5.95#4 5" PLAIN BLADE SPIRAL 36 TOOTH#OL46500..............................................$4.95#2 5" PLAIN 20 CROWN TOOTH#OL62200..............................................$5.95#5 5" PLAIN 16 CROWN TOOTH#OL62500..............................................$5.955" PINNED SCROLL BLADES 15 TOOTH#OL41101..............................................$3.955" PINNED SCROLL BLADES 10 TOOTH#OL41201..............................................$3.955" PINNED SCROLL BLADEASSORTMENT PACK #OL49500....$12.95

Bosch is the world-wide market leader for jig sawblades. This means uncompromising quality, innova-tive ideas and universal use.3"/20TPI SPLINTER FREE 2 SIDES#BOT101AO............................$6.954"/10TPI STRAIGHT/FINE CUT JIGSAW#BOT101B ..............................$8.954"/10TPI SPLINTER FREE DOWN CUT#BOT101BR............................$9.954"/6TPI FAST/STRAIGHT CUT JIGSAW#BOT101D ..............................$8.953"/24TPI THIN METAL JIGSAW#BOT118A ..............................$7.953"/12TPI SCROLL CUT JIGSAW#BOT119BO............................$7.95

4"/6TPI FAST/CLEAN JIGSAW#BOT144D ..............................$8.954-1/2" PREMIUM COMBO WOOD BLADE#BOT234X ............................$10.954-1/2" JIG SAW BLADE#BOT308B ............................$12.955-1/4" PREMIUM MULTI PURPOSE #BOT345X ............................$12.95BOSCH 10PC JIGSAW ASSORTMENT #BOT5002 ............................$16.95

Premium LowTensionBandsawBladesThese blades are industry leading bandsawblades and we are proud to be a distributorof these fine products.• Blades are milled, not stamped silicon steel bandsaw blades.• Blades are low tension, thin kerf blades which reduce the

need for more horsepower.Listed below are most common sizes. We can special order anysize or tooth combination.VPC - Variable Positive Claw - Great for green or dry wood!AS - Alternate Set - Great for green wood - WoodturnersTake Notice!

Jig Saw Blades

Coping Saw & Blades

SAW BLADE LUBRICANT #OL70010...........$7.95

Olson Saw Bladelubricant is specifical-ly made to keep metal, plastic and wood cut-ting blades from clogging from chips or pitch.

Pinend Scroll Saw Belts 1/4" Combo#CC25003 ..............$7.951/4" G120#CC25120 ..............$7.951/4" G180#CC25180 ..............$7.951/2" Combo#CC50001 ..............$7.951/2" G120#CC50120 ..............$7.951/2" G180#CC50180 ..............$7.95

Pinless Scroll Saw Belts1/4" Combo#CC25504 ..............$7.951/4" G120#CC25512 ..............$7.951/4" G180#CC25518 ..............$7.951/2" Combo#CC55002 ..............$7.951/2" G120#CC55120 ..............$7.951/2" G180#CC55180 ..............$7.95

Scroll Saw Belts

ScrollSander abrasives are easy to use and quicklysmooth edges of scroll saw projects. Use on wood, plas-tic, metal and composites. These durable, cloth backedbelts remove bumps, burn marks and feathering and cor-rect wandering from the cut line in seconds.

Saw Blade Lubricant

39


These drilling accessories are essentialfor anyone who ever installs hinges.The spring loaded guard automaticallycenters the drill bit in the screw hole,leaving a perfectly centered pilot hole.

Self-Centering Hinge Drilling Bit

1/4" #FB-001 ................$7.953/8" #FB-002 ................$7.951/2" #FB-003 ................$7.955/8" #FB-004 ................$8.953/4" #FB-005 ..............$10.957/8" #FB-006 ..............$11.951" #FB-007 ..............$11.9511/8" #FB-008 ..............$12.9511/4" #FB-009 ..............$13.9513/8" #FB-010 ..............$15.9511/2" #FB-011 ..............$18.9515/8" #FB-012 ..............$21.9513/4" #FB-013 ..............$22.95

17/8" #FB-014 ..............$23.952" #FB-015 ..............$25.9521/8" #FB-016 ..............$29.9516 PC FORSTNER BIT SETIncludes one of each bit listed

#FB-100 ............................$179.954 PC FORSTNER BIT SETIncludes: FB-001, FB-003, FB-005 & FB-007

#FB-104 ..............................$35.957 FORSTNER BIT SETIncludes: FB-001, FB-002, FB-003, FB-004,FB-005, FB-006 and FB-007

#FB-107B ..........................$59.95

These Austrian made forstner bits are amongthe finest made. They are manufactured toexacting tolerances using heat treated steel.Designed with center point, two periphery cut-ting edges and recessed shank, these bits willprovide accurate and consistent results.

Forstner Bits

The precision drill guide, with your electric drill, brings drill pressaccuracy to hand held drilling jobs. Attaching directly to all 3/8"and 1/2" drills, the precision drilling fixture assures accuratedrilling of right and variable angled holes. It’s an excellent wayto drill dowels making it great for chair work. It’s made of fiber-glass reinforced plastic and has adjustable depth stop and pro-tractor scale.

Precision Drill Guide

PRECISION DRILL GUIDE #PDG-001 ......$39.95

#3 HINGE BIT #PA79140 ....$8.95#5 HINGE BIT #PA79141 ....$8.95#9 HINGE BIT #PA79142 ....$8.95

#12 HINGE BIT #PA79143 ....$10.95#14 HINGE BIT #PA79144 ....$10.95

VERITAS TAPERED SNUG PLUGCUTTERS SET OF 3 (1/4"- 3/8"-1/2") #VT12740 ..................................$42.95

It can be difficult to fit plugs perfectly.If the hole is not drilled perfectly, thehole can be slightly over sized whichwill make your plug undersized. Thisproblem can become very noticeableonce you apply the finish. TheVeritas Snug Plug cutters aredesigned to cut slightly taperedplugs. The first 1/8" is the stated sizeof the plug, but then it flares out at a3 degree angle. This allows you totap in the plug until it is snug, thentrim flush with a saw. You will have aplug that fits perfectly, with a nearlyinvisible seem between the plug andthe surface.

Tapered Snug Plug Cutters

When you need this tool, nothingelse will do. The 16 piece hole sawkit will cut smooth, clean and accu-rate holes through material up to 1"including drywall, wood and plaster.It’s great for plumbers, electricians,remodelers and the DIY’er in gener-al. The kit includes a case and every-thing need to drill holes measuring3/4", 7/8", 11/8", 11/4", 11/2", 13/4", 2",21/2", 3", 31/2", 4" and 5".

16 Piece Hole Saw Kit

Milescraft Drill90 Convert your drill into a right-angle tool!

DRILL90 #WS13900......................$19.95

Being able to drill “around corners” is prob-ably the most common application of theDrill90. By changing the drilling angle, thedrill can function effectively in narrow orobstructed areas that would otherwise beunreachable. The ergonomic handle,which easily twists onto either side of theattachment’s housing, provides extra con-trol and handling ease for right or left-handusage. The chuck is already installed,making the job of using your drill that mucheasier! Fits any 3/8" or larger drill.

16 PC HOLE SAW KIT#GT42047 ................................$17.95

The 22 piece tapered drill bit setincludes a tapered bit, stop collar andadjustable counter sink for screw sizes 5through 12.

22 PIECE TAPERED DRILL BIT SET #TDS-007 ....................$29.95

22 Piece Tapered Drill Bit Set

3PC HINGE DRILL BIT SET CONSISTSOF 7/64", 9/64" AND 11/64"#GT35330 ..................................$10.95

7/8" TO 4" CIRCLE CUTTER#GE40000 ................$14.95REPLACEMENT BLADE#GE45000 ..................$4.95

5PC HSS 12" DRILL BIT SETSET CONSIST OF 1/8", 3/16", 1/4”,5/16" AND 3/8"#GT35297 ....................$18.95

3PC 25" DRILL BIT SETSET CONSIST OF 1/8",3/16" AND 1/4"#GT35393 ................$12.95

Pilot drill sets drill and countersink in one easy operation. Theset contains 4 different countersinks with the pilot bits meas-uring 3/32", 7/64", 1/8" and 9/64". Each countersink has anadjustable drill depth. Fits in all 1/4" and larger chucks.

4 Piece Counter Sink Set

4 PIECE COUNTER SINK SET #GE00034 ....................................$14.95

Drill Bit Set

DRILLING

40


DRILLING

The ultimate package for pocket hole join-ery from “The Pocket Hole Professionals”.The K3 Kreg Jig is packed with loads ofinnovative features. The first of these fea-tures is a three drill guide block that cannow be used in two separate tool bodies.Slide the block into the benchtop base anddrill pocket holes on your workbench, orremove the drill guide block and quicklyplace it into the smaller, portable base foruse on the job site. The face of the drillguide block now features a metal insertthat will produce years of clean-cut pocketholes. In addition, the benchtop base fea-tures patent pending front side clampingthat places the clamp handle on the sameside or the work as your drill - No morereaching around the workpiece to clamp!Are you tired of having to clean up woodchips after a day of drilling pocket holes?The benchtop base also accepts a snap-on dust collection shroud that can be easi-ly connected to a shop-vac for chip freedrilling! We’ve also built-in more heightadjustment into the drill guide block, allow-ing you to center a screw in material from1/2" to 1-1/2" thick in 1/8" increments.

Another addition to the K3 model is theMaterial Support Stop. This innovative fea-ture allows you to place pocket holes inexactly the same location on multiple work-pieces for true production style pocket holedrilling. The stop is hinged so it can be eas-ily moved out of the way when drilling pan-els. Quite simply, the Kreg Jig K3 MasterSystem is the most feature packed pockethole tool on the market, from the legendaryleader in pocket hole technology.

WASHERHEAD SCREWS1" #8 (COARSE 100 PK)#KR12511 ......................$4.9511/4" #7(FINE 100 PK)#KR00100 ......................$4.9511/4" #7(FINE 500 PK)#KR00500 ....................$16.95

11/4" #7(FINE 1000 PK)#KR12500 ....................$23.95Weatherproof11/2" (COARSE 100 PK)#KR15012 ......................$7.95

Kreg Jigs

Kreg Jig K3 Master System

KREG JIG K3 MASTERSYSTEM#KR30000......................$139.95 KREG JIG BIT#KRE-002 ...................... $16.95

Our industry leading line-up features products atevery price level that arepacked with features thatwill make your next wood-working project a breeze.Regardless of which toolyou choose, rest assuredthat it is manufactured withlegendary Kreg quality.TheKreg Jig® is the perfectchoice for DIY’ers and any-one new to Pocket-ScrewJoinery. Whether you’rebuilding your first set ofgarage storage shelves ormaking simple repairsaround the house, the KregJig® can help you finish thejob in less time, and with farless effort than you everthought possible. Its simpledesign gives you the confi-dence to start the project,and with joints as easy as“Drill. Drive. Done!” – you’ll

Kreg Jig K4X

If you’re ready to start your next wood-working or home improvement project, theR3 Kreg Jig® is the tool for you. We’veloaded this jig with a ton of features thatallow you to put projects together morequickly than ever before. Whether you’relooking to build that bookcase for yourhome office, cabinets for the kitchen, plantstand for the deck, or simple storageshelves for your garage, this is the tool thatwill allow you to build like a professionaland be the envy of your neighborhood.• 9 Position Settings • Wood Chip Relief Holes • Clamp Adapter • Organized Carrying Case • Hardened steel drill guides with

lifetime warranty

Perfect Pocket Hole Jig for the Do-It-Yourselfer

R3 KREG JIG#KRE-333 ..............................$44.95

Most of the time pocket holes can beplaced on the backside or underside of aproject where they are hidden from view.From time to time however, you may findthe need to place one in a visible loca-tion.We make solid wood plugs in a vari-ety of wood species that can be glued inand sanded flush to conceal the hole.

POCKET HOLE PLUGS (50 PACK)SOLID PINE WOOD #KRE-015................................$7.95SOLID OAK WOOD#KRE-016................................$7.95SOLID MAPLE WOOD#KRE-017................................$7.95

SOLID CHERRY WOOD#KRE-018................................$7.95SOLID WALNUT WOOD#KRE-019................................$7.95

Pocket Hole Plugs

Switch from drilling to driving in seconds. The all new 3/8"hex-shank step drill bit snaps directly into the QuickChange Chuck. No need for a bit adaptor. This new kitmakes the Kreg Jig process even faster.

Kreg Quick Change Kit

KREG QUICK CHANGE KIT#KRE-515 ..................................$29.95

actually want to finish it. Includes everything you need to getstarted with Pocket-Screw Joinery, including Kreg Jig®, SteppedDrill Bit, 6” Square Driver, Starter Screw Set, Starter Plug Set,SkillBuilder™ DVD, and Quick-Start Guide, all inside a compactand durable carrying case.

Kreg’s new Micro Pocket Drill guide allowswoodworkers to drill a pocket hole which is 25%smaller than our standard pocket holes and isperfect for 1/2" material. The smaller pockethole and shorter 3/4" pan head screws work tosecure thinner materials and still keep the headof the screw below the finished surface, while atthe same time easing the drill stroke and creat-ing smaller more low profile pocket holes forevery day use. The Kreg Micro Pocket Drillguide is fully compatible the Kreg Jig and KregJig Master Systems.

KREG MICRO POCKET DRILLGUIDE #KR75501 ................$44.95KREG MICRO POCKET DRILL BIT#KR75502 ..............................$16.95KREG MICRO POCKET DEPTHCOLLAR #KR75503................$2.95

KREG MICRO POCKET 3/4"SCREW (100) #KR75100 ......$3.95KREG MICRO POCKET 3/4"SCREW (500) #KR75500 ....$15.95

Micro Pocket Drill Guide

KREG JIG K4X #KR40001..........................$99.95KREG QUICK CHANGE POCKET HOLE BITADAPTOR (not shown) #KRE-516....................$7.95KREG QUICK HEX SHANK BIT (not shown)

#KRE-517 ....................................................$17.95

41

DRILLING


1-1/4"#8(COARSE 1000)#KR01250 ........$21.501-1/4" (COARSE 100)#KR12510 ............$4.951-1/4" (COARSE 500)#KR12550 ..........$16.951-1/2" #7(FINE 1000)#KR15000 ..........$25.951-1/2" (COARSE 100)#KR15010..............$4.95

1-1/2" #7(FINE 100)#KR15011..............$4.951-1/2" (COARSE 500)#KR15050............$17.951-1/2" #7 (FINE 500)#KR15051 ..........$17.952-1/2" (COARSE 50)#KR25010..............$4.952-1/2" (COARSE 250)#KR25250............$12.95

Kreg Washerhead Screws

No tool box should be without a Damaged Screw Remover Kit. It canremove both stripped screws and free spinning screws. The 2 pack ofremovers will remove screws from size 6 to size 14. Each bit is doubleended. One end drills out the head of the screw and the other end isthreaded to dig in when the screw is reversed out.

Damaged Screw Remover

What first appears to be a 135 degree, split point 1/4"drill bit, is actually a multi-purpose drilling tool. The M2High Speed Steel, titanium nitride coated bit also has90 sharp cutting teeth along the sides. It is ideal forroughing out holes in plywood, wall board and plas-tics. Just drill the hole and ream. The drill bit offersfast, easy drilling, even in steel. This is another greattool to have in the shop or the tool box.

Beaver Saw Drill

Forstner Bit Set

Wood ScrewsOnce you use a squaredrive screw, you’ll never goback to any other kind.They are much easier todrive than phillips or slotstyles and take a lot moretorque before they cam out.

WOOD SCREW Price Per Pound6 X 11/2" FACE FRAME SCREW#PAN6112............................$5.956 X 11/4" FACE FRAME SCREW#PAN6114............................$5.956 X 15/8" TRIM SCREW#PAN6158............................$5.956 X 21/4" TRIM SCREW#PAN6214............................$5.95

WOOD MASTER SCREWSPrice Per Pound8 X 1" #PAN8001......$4.998 X 2" #PAN8002......$4.99

8 X 3" #PAN8003......$4.998 X 11/4" #PAN8125......$4.998 X 13/8" #PAN8138......$4.998 X 11/2" #PAN8150......$4.998 X 13/4" #PAN8175......$4.998 X 21/4" #PAN8214......$4.998 X 21/2" #PAN8255......$4.998 X 23/4" #PAN8234......$4.9910 X 2" #PAN1002 ....$4.9910 X 3" #PAN1003 ....$5.4910 X 11/4" #PAN1025 ....$4.9910 X 11/2" #PAN1050 ....$4.9910 X 13/4" #PAN1075 ....$4.99

ROBERTSON DRIVER#1 X 2" BIT #PAN1200......$1.49#1 X 4" BIT #PAN1400......$1.49#2 X 1" BIT #PAN2100......$1.49#2 X 2" BIT #PAN2200......$1.49#2 X 3" BIT #PAN2300......$1.49#2 X 4" BIT #PAN2400......$1.49#2 X 6" BIT #PAN2600......$2.95

ECONOMY 16 PIECE FORSTNER BITSET #FBS-009 ......................$49.95

DAMAGED SCREW REMOVER #2 & #3#AC30000..................................$18.95

BEAVER SAWDRILL#BV20000 ................$6.95

The Drive 90 is a compact, right angle drill acces-sory that easily reaches awkward corners and diffi-cult angles. A die cast, zinc body houses the gearsthat are capable of 100 In. lbs of torque at 400rpms. Its’ magnetic 1/4" hex socket accepts andhandles all 1/4" drive bits and the tool fits any drill.

MILESCRAFT DRIVE 90#WS01302 ..........................$22.95

DRILL STUBBY BIT SET 6PC 1/4"SHANK: 3/32", 1/8", 3/16", 1/4",5/16", 3/8" X 1/4" HEX SHANK#WS23000 ..........................$19.95

DRILL STUBBY BIT SET 5PC 1/4"SHANK: 3/32", 1/8", 3/16", 1/4",5/16" X 1/4" HEX SHANK#WS23200 ..........................$14.95

Milescraft Drive 90

Set contains 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1",11/8", 11/4", 13/8", 11/2", 15/8", 13/4", 17/8", 2" and 21/8".

This extruded aluminum frame accepts materialup to 2" thick. Distances between the holes canbe adjusted easily from 3/4" to 23/8" on center orthey can be used separately. Secured either byclamps or screws, the jig can be used on virtual-ly any work surface. The jig includes a 6" #2drive, 3/8" step drill bit, stop collar, hex keys and30 self- tapping, pan head screws.

Pocket Hole Jig

POCKET HOLE JIG #BH12600....................................................$44.95

This jig is the best doweling jig a wood worker canown. With its patented automatic self-centeringaction, you will hit the center every time. A largesteel clamping screw tightens the jig like a vise with-out damaging the wood. The drill guide center ishardened and the guide holes are precision drilledand reamed for accuracy. Six drilling sizes of 3/16",1/4", 5/16", 3/8", 7/16" and 1/2" and a thicknesscapacity of 2" are all standard with this self-con-tained unit.

DOWELING JIG#WT10000................$46.95

Deluxe Doweling Jig

1/8" through 1/2" in 1/16" increments#WK28030 ......................$7.95

These centers are made to mark both the center of a holeand the center of a dowel rod. Each kit contains 2 eachof 1/4", 5/16", 3/8" and 1/2".

8 PC DOWEL/TENON CENTER KIT#CL70008 ......................$5.95

7 Piece Drill StopCollar Set

8 Piece Dowel / Tenon Center Kit

Screw Extractor SetDon’t let broken or stripped screws slow you down again.This isthe easiest way to remove broken and stripped screws withoutdamaging the work piece. The kit includes 5 multi-fluted steelextractors and 5 cobalt drill bits capable of removing screwsranging from 3/32" to 5/8".

SCREW EXTRACTOR SET 10PC #GT53105 ................................................................$18.95

150, 1" FINE / 150, 11/4" FINE / 75, 21/2" FINE /150, 11/4" CRS / 150, 1" CRS

KREG SCREWASSORTMENT KIT#KR00020......................$29.95

Kreg ScrewAssortment Kit

42


MACHINE ACCESSORIES

HD UNIVERSAL MOBILE BASE #J708118 ............................$69.9536" EXTENSION BAR PR. #J708116 ............................$24.9550" EXTENSION BAR PR. #J708117 ............................$34.95

These universal bases are sure to replace all otherson the market. Each of these bases is fullyadjustable without any tools.They have locking cast-ers and will raise the machine just .5" from theground, keeping the surface where you need it. Theheavy duty is adjustable from 18" to 28" square andsupports 600 lbs. The industrial base can support1200 lbs and adjust from 24" square to 34" square.Each base can be outfitted with extension bars thatmake the bases even more adjustable.

Jet Universal Mobile Bases

We've latched on to the best drive belts for your motordriven tools - the PowerTwist V-Belts. These offer dura-bility, convenience, and exceptional vibration reduc-tion. A real plus is that they are easily installed withoutdismantling your drive components. These unique andfunctional belts will prove to be wonderful investmentsin your shop.

Power Twist Drive BeltCustomize Your Motor-Driven Set-Up

Ceramic Cool BlocksCeramic cool blocks will make your blade runcooler, cut better and last longer. The blocksthemselves will easily outlast any other block onthe market! Ceramic cool blocks are an excel-lent and affordable way to make a very notice-able improvement to an already good bandsaw.

COOL BLOCKSDELTA 14" #SA10000......$15.95JET 14" #SA10001 ........$15.95

This patented knife setting jig helps you set joint-er knives in perfect alignment every time. It willalso let you accurately shift nicked knives lateral-ly to make your knives last as long as possible.Works on jointers from 4 to 8 inches.

Magnaset For Jointer

MAGNASET FOR JOINTER#MAG-001 ................................$47.95

Kreg Precision Bandsaw FenceIntroduce a new level of accuracy to yourband saw with Kreg’s Precision Band SawFence. The fence is adjustable in two dimen-sions for ease in setting its parallel to theblade. Cutting accuracy and repeatability isfurther enhanced by a precision lens cursorthat reads off the included scale. It mounts tomost 14” band saws including Jet, Delta,General, Grizzly and many more. Optionalaccessories include a micro-adjuster and are-saw guide.

KREG PRECISION BANDSAW FENCE #KR72000 ..................$109.95

Ceramic Thrust BearingDoes your band saw squeal when youmake your cuts? If it does, you couldimprove your machines performance witha Ceramic Thrust Bearing. These are thebearings, upper and lower, that are behindthe band saw blade and keep it in placewhen you apply pressure making your cut.The stock bearings are not made for thetype pressure they absorb. They are madefor pressure along the edge, like on arouter bit.

These ceramic bearings don’t spin likethe ones that come on the bandsaw. Theyare fixed and will never wear out. If they, forsome reason, were to slightly wear, theycan be rotated the full 360 degrees. Theywill easily out last most bandsaws. The

bearings fit Jet, Delta and most other 14"imported bandsaws.

CERAMIC THRUST BEARING/JET,DELTA 14" • 13/16" DIAMETER X3/8" THICKNESS, CENTER HOLE 25/64"#SA10002 ............................$19.95

These industrial planer and jointer knivesare made from a premium high speedsteel stock. Each is pre-ground to a razorsharp edge to provide a super smooth cut.

Jointer Planer Knives

JOINTER KNIFE SET6" X 5/8" X 1/8" POWERMATIC / DELTA / JET #FR60248 ..$34.958" X 3/4" X 1/8 #FR60354 ..................................................$44.95 15" X 1" X 1/8" DELTA / JET #FR60514 ............................$69.95

Cool Blocks extend the life of your band saw blade andimprove blade performance. Cool Blocks are made of acomposite material called “Graphite ImpregnatedPhenolic Laminate”. It contains 3 synthetic dry lubricantsthat lubricate the blade but do not make it oily. CoolBlocks allow the blade to run cooler and last longer. Theywork particularly well on thinner blades used for tightradius work.

Cool Blocks

COOL BLOCK SETDELTA 14" SAW #CBL-001....................$12.9514" BANDSAWS #CBL-003 ..................$12.95

The HTC 2000 adjustable mobile baseis truly a universal fit. Featuring 400 lb.capacity, this base extends from 12" x 12"to 36" x 36" square or 20" x 52" in a rectangular configura-tion. Assembles easily using 4, 12" and 4, 18" side rails,with holes spaced every one inch. Foot operated leversraise and lower the base and there is a full 7/8" clearance under leveling feet duringmovement.

MOBILE BASE #HTC2000 ..........$69.95

HTC Mobile Base

4" POLY CASTER/PLATE FIXED #WK26050....................$8.954" POLY CASTER/PLATE/DBL LOCK #WK26100..................$12.95

These casters feature a polyurethane wheelmolded polypropylene hub with an oil-lessbearing. They are excellent for a wide varietyof applications where quiet operation, highwear and high corrosion resistance is neces-sary. They have a 275 lb. capacity and comein both fixed and swivel/wheel lock designs.

4" Polyester Casters

POWER TWIST - Price Per Foot1/2" DRIVE BELT #FD40830 ....$9.953/8" DRIVE BELT #FD04050......$9.95

SAVE -1/2" DRIVE BELT 4 FOOT PACK#FD04181 ..................................$36.95

INCRA MITER GAUGE #IN27000 ....$59.95

INCRA Miter GaugeMost machine manufacturers don’t offer quality mitergauges with their table saws. With this miter gauge fromIncra, your saw will live up to its potential. Its miter bar isoutfitted with four expansion disk that can be adjusted tomake it glide perfectly in your miter track. 27 laser cut Vstops insure accuracy for the more common anglesalthough any angle from 0 to 60 can easily be repeated.

43


METAL / TOOL PROTECTANTS

Goodbye rust. The Sandflex Abraser Block willraise a few eyebrows when it comes to gener-al shop cleanup and maintenance. The popu-larity of these jewels continues to grow andmany publications are recognizing the useful-ness also. Popular Mechanics calls it “one oftheir most timesaving and versatile products,”Fine Woodworking Magazine, AmericanHow-To and Family Handyman Magazinealso tell their effectiveness. Now some of youare asking, what exactly do these things doand how are they used? We couldn’t list allthe uses on this page but some of the morepopular uses include:• cleaning table saw tops to a smooth,

silky finish• bandsaw tables and jointer tables will

be smoother than when youbought them

• clean rust and scalefrom chisels, carvingtools and saw blades

• put an unbelievableshine on stainless steelkitchen sinks and pots &pans

• scrub soap scum and dirtfrom showers (ceramiconly) and toilet bowls

• clean solid surfacematerials like Corian® (itwill even sand the jointswhen countertops are installed) .

Simply use the block like an eraser, rubbingfirmly on the surface. Combined with oil, wateror any cleaning fluid, the results can be even

more spectacular.There’s no secret, the 3" x 2" x 3/4" block ismade of a semi-flexible rubber compound withgrits impregnated throughout the block. So, asyou use it new grits are constantly exposed—never dulls or clogs up. Another plus is thatthey’re so inexpensive that if you need to

clean up a concave or convex sur-face, you can “carve” theSandflex Block to anyshape. No tool box or

household should be withoutthe Sandflex Abraser Block.

Choose from three grits,coarse, medium and fineor to get the most value,order the kit that includes

one of each!

SIZE: 3" x 2" x 3/4"

Shine and protect your machinery in just minutes.The easiest and fastest wax available and the onlywax that actively blocks rust and corrosion. Protectseverything from machinery and appliances to carsand trucks.

BULLFROG FAST WAX & RUSTBLOCKER 32oz#BF98198 ..................................$10.95Prevent rust before it starts. Sprayed on, it forms aninvisible "moisture resistant umbrella" that sealsexposed metal surfaces against rust and corrosion.Great for anything in the shop from machinery topsto gears, chisels to hand planes.

RUST BLOCKER #BF93896 ..$12.95Protect enclosed areas from rust and corrosion.Simply hang these Rust Blocker products in any-thing from a toolbox to a tool locker. Choose fromthe different sizes based on the area you need toprotect.

Bullfrog Rust Remover

Boeshield MetalProtectantsThe Resin, Gum & Pitch Remover will keepyour cutting tools like saw blades and routerbits performing to their utmost. This non-toxic, biodegradable formula gentlyremoves the unwanted build-up quickly andeffectively.If rust has already become a problem onsome of your tools, Rust Free will remove itwithout harm to your tools. Also works greaton rust stains on porcelain, concrete orcloth. This is a must-have for every shop.No Air Shipments!

RUST & STAIN REMOVER#TB00008 ......................$9.95BLADE & BIT CLEANER#TB80088 ......................$9.95T-9 WATERPROOFLUBRICANT - AEROSOL#TB90004 ......................$8.95

RUST REMOVER16oz #BF94236 ..............$12.95

3" EMITTER STRIPS 6PK Each strip protects 1 cu ft#BF91016......................$9.95EMITTER CUPEach cup protects 11 cu ft#BF91112......................$9.95EMITTER SHIELDEach shield protects 100 cu ft#BF91321....................$12.95

Finally, a rust remover that’ssafe to use and is safe for theenvironment and it reallyworks. Cleans up with waterand has Vapor CorrosionInhibitors to prevent metalsfrom flash rusting. Machinery,lawn and garden equipment and anything else made ofmetal will benefit from Rust Remover. No Air Shipments!

Sandflex® Blocks“One of the Most Timesaving and Versatile Products.”

Rust Remover onHand Saw Blade

Sandflex Coarse Abraser Block#SA99999 ..........................$3.95Medium Abraser Block#SA99998 ..........................$3.95

Fine Abraser Block#SA99997 ..........................$3.953 Sandflex Blocks (one of ea. grit)#SA99996 ..........................$9.95

TopCote Have the Smoothest Tool Tops Ever

Use TopCote along with Sandflex blocks to achieve a silky smooth sur-face on your table saw tops, band saw tables, scroll saw tops, and othertools. Compared to paste wax, TopCote is 30% slicker and preventsrust 5 times longer - plus it’s easier to apply. TopCote contains no sili-cone or petroleum so it won’t stain your wood or interfere with glues orfinishes. No Air Shipments!

5.5 OZ TOPCOTE #BOS1005 .....$10.9510.75 OZ TOPCOTE #BOS1075 .....$14.95

A frequent complaint that we hear from our customers is blade and bitdullness and performance. For increased blade life, cooler operating,cleaner cuts and decreased burns, Pitch Rx can deliver. A non-flamma-ble, biodegradable, phosphate-free, abrasive-free, no silicone, and non-aerosol product, Pitch Rx will remove stubborn pitch that ruins yourblade, bit, and knife-edges. Simply soak blade for just 2-3 minutes. 1-pintsize is economical and effective.

BELT & SAW CLEANER #AT16000 ................$13.95

Pitch RX Belt & Saw CleanerQuickly Removes Stubborn Pitch & Gum

This dry lubricant forms a thin, low-friction coating that mechanicallybonds to the surface, providing excellent lubrication under high tempera-tures and pressure. 801 reduces friction, inhibits resin build up, and pro-longs tool life. This spray contains no silicon or oil and will not affect woodfinishes. Use on saw blades, router bits, drill bits and virtually all other cut-ters for outstanding lubricating action.

WOODWORKER’S DRY COAT LUBE#SW00801 ........................$9.95 No Air Shipments!

Woodworker’s Dry Coat Lube

The performance and life of your cutting tools are clearly affected bypitch and gum build up. Not only does pitch and gum shorten the lifeof the cutting tool, but it can leave sloppy cutting edges and burn yourstock. Sprayway® Pitch and Gum Remover is an easy one step solu-tion to these problems. Simply spray it on the blade, bit or cutter andwipe it off. It’s that simple. So remember, it pays to keep those expen-sive cutting tools at their best. No Air Shipments!

Pitch & Gum Remover Increase The LifeAnd Performance Of Your Cutting Tools

SPRAYWAY® PITCH & GUM REMOVER#SW00836 ..............................$7.95

44


TABLE SAW ACCESSORIES

KREG PRECISION MITER GAUGE SYSTEM - Includesfence & flipstop #KR71020 ...........................$159.95

KREG JIG & FIXTURE BAR 30"#KR73030 ............................$25.95KREG ADJ MITER TRAK 42"#KR74020 ............................$26.95KREG MINI TRAK 48" W/4'TAPE#KR75060 ............................$20.95KREG TOP TRAK 24"#KR77120 ............................$23.95KREG TOP TRAK 48"#KR77140 ............................$36.95

KREG SELF ADHESIVEMEASURING TAPE12' RH #KR77230................$7.9512' LH #KR77240................$7.95NON-ADHESIVE4' R&L #KR77270 ................$5.95

KREG TRAK CLAMP#KR75110..............................$5.95

The accuracy of thewoodworking equip-ment in your shop is animportant part of youproject turning out justright. Whether it beyour tablesaw, miter-saw, drill press orbandsaw, Kreg’s line ofmeasuring acces-sories will help get thehighest level of accura-cy possible from your machines. They are equally beneficial whenbuilding jigs and fixtures. Not only will your results be more precise,they will be easily repeatable. The consistency and accuracy of manyoff the imports is lacking. Sometimes they fit and sometimes theydon’t. Unlike many import brands that “appear” to be the same item ata fraction of the price, The Kreg product is the real thing and there isa difference. It’s fit and finish is perfect and it does exactly what it saysit will do. These products will enable you to get the most out of themachines you have invested in.

Board Buddies are an anti-kickback device ideal for table sawand router table fences. The high grip rubber wheels helphold the stock snug against the fence while cutting or routing.Not only do they hold the stock against the fence, the wheelsonly turn clockwise which helps in the case of kick back.Board Buddies mount to fences 3" x 3.5" high and 1" or wider.A 24" accessory track is sold which allows the Buddies toslide to any spacing. Board Buddies are only sold in pairs.

BOARD BUDDIES YELLOW #WK11040......$39.95 BOARD BUDDIES 24" TRACK #WK11080 ..$16.95

Board Buddies

The Clamping Miter Gauge is safer than the standard because itenables you to keep your hands away from dangerous blades. Ithas a comfortable D-handle grip, built in sliding stop and positivetrigger clamping action. It fits standard 3/8" x 3/8" miter slots andhas positive angle stops at 90 and 45 degrees, both right andleft. The bar with a stop extends up to 12".

CLAMPING MITER GAUGE #WK13230 ............$42.95

Clamping Miter Gauge

Kreg Precision Miter GaugeSystem

Slick Tape Tune Up Your FencesUHMW has become the frictionreducing material of choice thesedays. KLINGSPOR now offers aroll of 3" x 36" Slicktape for yoursaw fence, router fence or anyother specialty application.

Get the most out of your machinery. Use a dial indicator to accurately set upyour machinery to be its best. The powerful magnetic base has an infinitelyadjustable control arm, fine tuning beam and magnet switch. Add to this the 1"travel dial indicator with divisions of .001", .100" per revolution and a .100"counter and any set up job is a snap.

Dial Indicator

DIAL INDICATOR WITH MAGNETIC BASE #WK32070 ........$36.95

SLICK TAPE#FF33000 ................$9.95UHMW SHEETS3/4" X 36" X 3/8"#FF60001 ................$9.95

The new blade changer from Milescraft will make bladechanges faster and easier. Its universal design allows it to workwith blade sizes ranging from 7.25" to 10". With the handle off-set, you can still have a firm grip on the blade while not block-ing your view of the arbor.

Milescraft Blade Changer

MILESCRAFT BLADE CHANGER#WS34010 ..................................................$12.95

The Tilt Box is a digital inclinometer that will read relative angles to a resolu-tion of .05 with an accuracy of plus/minus .1. Turn it on, place it on your tablesaw and press the zero button to establish relative zero. Then attach mag-netized Tilt Box to your blade. It will register the relative angle between theblade and the table surface. The display is large and easy to read. Poweredby 9 volt battery (Included).

TILT BOX INCLINOMETER #BK70012....................$39.95

Tilt Box Inclinometer

Multi-UseMeasuring ToolGreat for setting up a saw or router.

MULTI-USE MEASURING TOOL#BH13080 ............................$12.95

The Mag Jig is the perfect accessory for the woodworkerthat likes to make his own jigs. Any jig that is used on acast iron or steel surface can be made more efficient anduser friendly with Mag Jigs. Instead of covering the sur-face with C clamps and bar clamps, the Mag Jig is aclamping device that’s built into the jig. A quick drilledhole is all that’s needed to mount the Mag Jig. Onceinstalled in the hole, a simple 1/4 turn of the knob eitherengages or releases the magnetic force.20mm jigsrequires a 30mm hole/30mm jig requires a 40mm hole

MAG JIG 20MM #MT06004 ............$26.95MAG JIG 30MM #MT06005 ............$34.95

Mag Jig

T-Slot Track Hold Down With KnobThis hold down clamps the 3/8" x 3/4" T-Track and quicklysecures with the twist of a knob. By turning the clamp head 180degrees to the work piece, the clamp offers a dual capacity of 0to 3/4" and 0 to 21/2". T-tracks are available in 3 lengths.

T-SLOT TRACK 12" #WK27230 ................$5.95T-SLOT TRACK 24" #WK27240 ................$7.95 T-SLOT TRACK 36" #WK27250 ..............$9.95 T-SLOT TRACK HOLD DOWN WITH KNOB #KR75110 ........$5.95

45


TABLE SAW ACCESSORIES

This particular push stick has 8 built in functions.Other than its ergonomic design, the push stickhas depth gauge, 45 degree angle, 30/60degree angle, 6" hook rule, 9" rule, center finderand a 90 degree rule.

SAW-AID PUSH STICK#UC60000..........................$16.95

Saw-Aid Push Stick

Zero clearance inserts are a very efficient way totune up a table saw. They are ideal when cuttingwoods that tend to chip or any time you are using adado blade. Simply install the insert and slowlyraise the blade through the surface. These insertsare not like those cheap, imported jobs that are sel-dom flat.The US made inserts are made of one halfinch high density phenolic resin and are complete-ly flat. There are also four adjustment screws thatwill help you get the insert perfectly level in yourtable. Measurements are for table saw openings.

DELTA INSERT 33/4x133/8

#LC10000 ..............$22.95CRAFTSMAN INSERT33/4x14#LC10001 ..............$22.95JET & GENERAL INSERT37/16 x 121/2 x 7/16#LC10002 ..............$22.95POWERMATIC INSERTfor 66 saw only#LC10003 ..............$22.95POWERMATIC PM2000WITH SLOT#LC10005 ..............$29.95

Table Saw Inserts

The Miter 1000 Miter Gauge is built to veryhigh standards with every detail in mind.Adjustments are made to the miter barthat totally eliminate all slop in the mitertrack that is so common on other mitergauges.The miter gauge is indexed every5 degrees over the full range of 180degrees. The fence itself is 18" and has afully adjustable sliding stop.

INCRA 1000 MITER GAUGE#IN10027......................................................$109.95

INCRA 1000 Miter Gauge

Magswitch feather boards give you all of the benefits oftraditional feather boards with one major advantage-complete flexibility. Unlike regular feather boards whichare essentially tied to a miter slot, Magswitch featherboards can be attached anywhere on the steel table orfence. They utilize the same 20mm Mag Jig that’s soldseparately.The Vertical Featherboard attachment can beadded to keep constant down force on your work piece.

PRO TABLE FEATHERBOARD30MM #MT10328 ............................$48.95

VERTICAL FEATHERBOARDATTACHMENT /PRO #MT10339 ............................$12.95

Magnetic Featherboards

The Double Ended Feather-board is made ofhigh impact poly styrene. One side of the feath-erboard has 1/8" fingers for light to mediumpressure while the opposite side has 3/16" fin-gers which help with larger items that requiremedium to heavy pressure. It is made to beused with the standard 3/4" x 3/8" miter slot butcan also be mounted in a vertical position.

DOUBLE ENDED FEATHERBOARD #PA79074............................$12.95

Double Ended Feather Board

The new Milescraft feather boards works on both table saws and router tables, on the tabletop or the fence. It comes with everything need to mount, including 5/8" and 3/4" miterbars. The dual/tandem model can be used as one or taken apart and used individually.

Milescraft Feather Boards

FEATHERBOARD#WS14060............................$14.95

FEATHERBOARD DUAL/TANDEM#WS14070............................$29.95

The latest Magswitch feather board is the UniversalModel. It utilizes the same magnetic designs of theirother models, but it is much more versatile in that itcan be used on either side of the blade and even onfences.

UNIVERSAL FEATHERBOARD#MT10015 ............................$39.95

Universal FeatherboardThe Magswitch brand of magnetic holddowns has been on the market for a coupleof years. With their unique “twist to engage”locking magnetic system, Magswitch hasrevolutionized machine jigs and hold downs.Their latest addition to the line is theMagFence Universal Mounting Base Kit.The kit consists of a magnetic base and twoattachments that mount 90 degrees to thetable surface.One attachment is flat and hasroller bearings on its face while the other hasa 7 degree bevel on each side with a bear-ing at the center point. The beveled attach-ment would be perfect for the band sawwhile the flat attachment would help out on

MagFence UniversalMounting Base Kit

The new Woodpeckers Coping Sled is sim-ply the best tool on the market for producingperfect end grain cuts on you router orshaper table. It addresses every issue thatcomes with doing those tricky end grain cutslike those on the rails of doors. The stock isheld down securely and perfectly square toyour fence, set up easily and keeps yourhands free and clear from the cutter.Weighing in at 8 lbs. and measuring 111/2"square, the coping sled will absorb much ofthe vibration and will slid easily across thework surface. Stock up to 51/2" wide and 11/2"thick will fit on the coping sled.

COPING SLED#PK36007 ..........................$139.95

plete with 36" fence, 2 flip stops, 2 hold downclamps and one sacrificial filler.

COMPLETE DRILL PRESS TABLE#PK36006 ..........................$134.95

Coping Sled

Woodworking applications on a drill pressrequire repeatable set ups and amplesupport for large panels. Most drill presstables don’t have the table space forthese applications. This fully outfitted drillpress solves these problems. At 1" thick,this high pressure laminate 16" x 23" isextremely sturdy. The 36" fence isadjustable right to left and front to back.Both the fence and the embedded track itattaches to are engraved with inch scalesmaking it very easy to set up and adjust.All of the embedded tracks are 1/4" com-patible for clamps and accessories andthe table attaches from underneaththrough slots in the original drill presstable. The drill press table comes com-

Complete Drill Press Table

a jointer as well as many other applica-tions.

MAGFENCE UNIVERSAL MOUNTINGBASE KIT #MT10110 ..............$149.95MOUNTING BASE #MT10112 ....................................$24.95


DISC SANDING

46

Disc SandingThe use of discs for a variety of sanding and finishing applications con-tinues to grow in popularity and with the many different types of sanderson the market, the disc’s versatility is almost unmatched. You name itand a disc can probably accomplish it - from coarse grits for leveling, tomedium grits for general purpose sanding, to fine and very fine grits forfinal sanding and finish sanding. Klingspor’s Woodworking Shop offers adiverse range of materials to accomplish virtually any task you might bein need of completing.

One of the foremost materials in our line-up is our stearate aluminumoxide. It’s a truly multipurpose product that has become a mainstayamong woodworkers for many years.

Stearate DiscsWhen sanding sealer or soft resinous woods the only thing that willget you through the job is a material that won’t clog up with the resinor wood dust. This happens to be the best industrial grade stearatedsandpaper you can buy to tackle those situations and it’s no more expen-sive than the “hobby grade” stearate products that our competitors sell. Inaddition to bare wood sanding, you’ll find our stearate is perfect for• sanding between coats of paint on wood or metal,• sanding auto body components, plastics, and even fiberglass• with the huge increase in installations

of solid surface materials you’ll findthe Klingspor stearate to be a top per-former for these applications.

Depending on the grit, this quality mate-rial is offered in a B-weight or C-weightpaper backing.

Hook & Loop Hole Chart

AEG TXE 150Milwaukee

Bosch 1370DEVSFein 6" RandomOrbit Sander

Dewalt 443Bosch 3727Porter Cable 7336

Fein8"16 holes

Bosch 3107DVSBosch 3725Bosch 3283DVSBosch 1295D, DHDewalt DW421, DW423MakitaRyobi RS200KLINGSPOR Sander

Porter Cable 333Dynabrade 57016 (PSA)

Ryobi RS115Ryobi RS112 Craftsman®

Makita

Festool5" 9 holes6" 9 holes

Hook & Loop ContourCushion Pad5" X 5 HOLE#FR50505 ................................$6.955" X 5 HOLE EXTRA SOFT#FR50506 ................................$8.955" X 8 HOLE #FR50808 ................................$6.95

5" X 8 HOLE EXTRA SOFT#FR50809 ................................$8.956" X 6 HOLE #FR60606 ................................$8.95

LightweightPaper DiscsOur lightweight paper discs achieve twothings for you and your shop. They pro-duce a soft consistent finish and theyaccomplish this at an economical price.This material is a open coat aluminum oxide, fullyresin bonded to a lightweight paper backing. Thenature of this paper allows for keeping a very evensanding face while offering some conformability. You’llappreciate the fine finishes that our lightweight paper produces.

5" 5" 6"8 holes 5 holes 6 holes

220 Grit VD70005 VD70011 VD70040$13.95 13.95 17.95

180 Grit VD70044 VD70045 VD70043$13.95 13.95 17.95

150 Grit VD70004 VD70010 VD70039$13.95 13.95 17.95

120 Grit VD70003 VD70009 VD70038$13.95 13.95 17.95

100 Grit VD70002 VD70008 VD70037$13.95 13.95 17.95

80 Grit VD70001 VD70007 VD70036$13.95 13.95 17.95

60 Grit VD70000 VD70006 VD70035$13.95 13.95 17.95

50 Pack “Lightweight” AluminumOxide Economical Paper Kling-On®

(hook & loop) Discs

Kling-On® Conversion KitEconomically Switch Your StickyBacking Pads to Hook & Loop

For those of you changing over your PSA back-ing pads to hook & loop, we have developed thenext great advancement; pre-punched “hook”with a sticky backing. Simply choose the correct hole pattern, peel and stick. Instantly yourPSA backing pad is transformed into one which accepts hook & loop sandpaper. Deviseyour own hook & loop sanding system - buy our convenient 12" pieces.

5 Pack PSA Hook & Loop Discs5" no hole #VC51000......................$7.956" no hole #VC60000......................$8.955" 5 hole #VC50500......................$7.955" 8 hole #VC50800......................$7.956" 6 hole #VC60600......................$8.956" 8 hole #VC60800......................$8.956" 16 hole #VC60160......................$8.95

12" X 24" PSA VELCRO® SHEET #VC12040 ............$14.95 ea.

47

DISC SANDING


41/2" 5" 5" 5" FESTOOL 5" 6" 6" 6" FESTOOL 6" FEIN 8"8 holes no holes 8 holes 5 holes 9 holes no holes 6 holes 8 holes 9 holes 16 holes

“Stearate”Aluminum Oxide Non-Loading Kling-On® (hook & loop) Discs

Grit

VD90114 VD90155 VD90119 VD90124 VD90074 VD90094 VD90129 VD90134 VD90174 VD90194$4.95 4.95 4.95 4.95 4.95 6.75 6.75 6.75 6.75 8.95

VD60135 VD60086 VD83005 VD82005 VD60092 VD60098 VD84005 VD60104 VD60110 VD60116$15.95 $15.95 15.95 15.95 15.95 21.95 21.95 21.95 21.95 30.95














VD60128 VD60117 VD60119 VD60118 VD60120 VD60065 VD60042 VD60066 VD95303 VD20240$15.95 $15.95 $15.95 $15.95 15.95 21.95 21.95 21.95 21.95 30.95















Our Best Selling Sandpaper!

1500 10 Pack

50 Pack

1200 10 Pack

50 Pack

1000 10 Pack

50 Pack

800 10 Pack

50 Pack

600 10 Pack

50 Pack

400 10 Pack

50 Pack

320 10 Pack

50 Pack

240 10 Pack

50 Pack

220 10 Pack

50 Pack

180 10 Pack

50 Pack

150 10 Pack

50 Pack

120 10 Pack

50 Pack

100 10 Pack

50 Pack

80 10 Pack

50 Pack

60 10 Pack

50 Pack

48


DISC SANDING

This is the real thing – the product that furniture manufacturers from around the world count on day in and day out to outlast andoutperform other paper products from international competitors. It’s available to you for use in your very own shop as well! You heardit correctly – you’ll get the exact material when you order these discs from Klingspor’s Woodworking Shop.

This product is produced from the finest components; aluminum oxide grains, premium resins, and a heavy F-weight paper backing. It’sideal for sanding all types of wood or for grinding and polishing metal. A unique “Anti-static” property has been added so that your sand-ing dust is more easily removed from the sanding surface and from the air by whatever form of dust collection you use. In other words, the static produced while sand-ing which normally makes the sanding debris either stick to your workpiece or to the abrasive itself, is eliminated making a safer and more enjoyable work area.

All in all, this is the longest lasting and best performing disc material on the market. Find out what you’ve been missing and try these heavy weight discs today.

The Advanced Coating Technology (ACT) developed by KLINGSPOR Abrasives is a true synergy between process and prod-uct. It is a process innovation explicitly geared for the improvement of grain adhesion in coated abrasives. The result is sub-stantially more abrasive strength with a noticeably longer service life to your abrasive product. Look for the ACT logo to beassured of the longest lasting coated abrasive products on the market today.

“Heavy E-Weight” Paper Kling-On® (hook & loop) Discs

Advanced Coating Technology

Festool41/2" 5" 5" 5" 6" 6" 6" 5" 6"

Grit 8 holes 8 holes 5 holes No holes No holes 6 holes 8 holes 9 holes 9 holes

400 10 Pack VD98049 VD98019 VD98009 VD98070 VD80108 VD98029 VD80060 VD98100 VD98079$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95

50 Pack VD80059 VD80088 VD80090 VD80111 VD80013 VD80109 VD80111 VD80114 VD80116$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95

















Advanced Coating TechnologyConventional Abrasive

Abrasive with ACT Technology

Grain Break-out

Time

Stoc

k re

mov

al

49

DISC SANDING


5" 6"No holes No holes

220 Grit SD00618 SD49609$15.95 $20.95

180 Grit SD00617 SD49608$15.95 $20.95

150 Grit SD00616 SD49607$15.95 $20.95

120 Grit SD00615 SD49606$15.95 $20.95

100 Grit SD00614 SD49605$15.95 $20.95

80 Grit SD00613 SD49604$15.95 $20.95

60 Grit SD00612 SD49603$15.95 $20.95

40 Grit SD00611 SD49602$15.95 $20.95

36 Grit SD00610 SD49601$15.95 $20.95

This material continues to “wow”the woodworking markets withits softness and with itssmooth surface finishes. Plus,no other sandpaper can matchKlingspor Gold’s flexibility - perfectfor disc sanding with an extra soft backing pad on contoured surfaceslike chair bottoms or bowl sanding on the lathe. The secrets are in our special Egyptiancloth backing and in the unique sanding additive. Try these for your most prized work-pieces and see why the Klingspor Gold material is almost legendary.

Kling-On® KLINGSPOR GOLDCloth Backed Discs-10 Pack

3" 5" 5" 5"GRIT No Hole No Hole 5 holes 8 holes

400 CD31001 CD50510 CD55020 CD58030$4.50 7.50 7.50 7.50

320 CD31002 CD50511 CD55021 CD58031$4.50 7.50 7.50 7.50

220 CD31003 CD50512 CD55022 CD58032$4.50 7.50 7.50 7.50

180 CD31004 CD50513 CD55023 CD58033$4.50 7.50 7.50 7.50

150 CD31005 CD50514 CD55024 CD58034$4.50 7.50 7.50 7.50

120 CD31006 CD50515 CD55025 CD58035$4.50 7.50 7.50 7.50

100 CD31007 CD50516 CD55026 CD5803$4.50 7.50 7.50 7.50

80 CD31008 CD50517 CD55027 CD58037$4.50 7.50 7.50 7.50

AZ-Plus 50 Pack Alumina ZirconiaPaper Kling-On® (hook & loop) Discs

5" 5" 5" 6" 6"No holes 8 holes 5 holes No holes 6 holes

220 Grit VD49109 VD49118 VD49127 VD49136 VD49145

$21.95 $21.95 $21.95 $33.95 $33.95180 Grit VD49108 VD49117 VD49126 VD49135 VD49144

$21.95 $21.95 $21.95 $33.95 $33.95150 Grit VD49107 VD49116 VD49125 VD49134 VD49143

$21.95 $21.95 $21.95 $33.95 $33.95120 Grit VD49106 VD49115 VD49124 VD49133 VD49142

$21.95 $21.95 $21.95 $33.95 $33.95100 Grit VD49105 VD49114 VD49123 VD49132 VD49141

$21.95 $21.95 $21.95 $33.95 $33.9580 Grit VD49104 VD49113 VD49122 VD49131 VD49140

$21.95 $21.95 $21.95 $33.95 $33.9560 Grit VD49103 VD49112 VD49121 VD49130 VD49139

$21.95 $21.95 $21.95 $33.95 $33.9540 Grit VD49102 VD49111 VD49120 VD49129 VD49138

$21.95 $21.95 $21.95 $33.95 $33.9536 Grit VD49101 VD49110 VD49119 VD49128 VD49137

$21.95 $21.95 $21.95 $33.95 $33.95

Check www.woodworkingshop.com for AZ-Plus 10 Packs.

KLINGSPOR comes through againwith another high performancesanding product. Our AZ Plus mate-rial combines the superior strengthof Alumina Zirconia abrasive grains,the levelling properties of a paperbacking, and a great stearate addi-tive that prevents loading and clog-ging into one fabulous product.You'llappreciate this combination whensanding bare wood and when sand-ing sealer coats.Let's look at the advantages of eachof the components - the AluminaZirconia grains work great fordimensioning of wood as well thegrinding of stainless steel and otherhard steels, the sanding of bodyfillers, and other hard to sand mate-rials. Even with aggressiveness ofthe grains, AZ PLUS offers a veryconsistent finish with the levellingproperties of the C & D weightpapers and will stay sharper longerwithout loading. This product willsoon fill every woodworking andbody shop in the country. Try ittoday!

AZ-Plus 50 Pack Alumina ZirconiaPSA Discs

Iron Squares Fingers TeardropGrit400 SK73118 SK73449 SK73559 MT90400

$4.95 4.95 3.95 4.95320 SK73117 SK73448 SK73558 MT90320

$4.95 4.95 3.95 4.95220 SK73116 SK73447 SK73557 MT90220

$4.95 4.95 3.95 4.95180 SK73115 SK73446 SK73556 MT90180

$4.95 4.95 3.95 4.95150 SK73114 SK73445 SK73555 MT90150

$4.95 4.95 3.95 4.95120 SK73113 SK73444 SK73554 MT90120

$4.95 4.95 3.95 4.95100 SK73112 SK73443 SK73553 MT90100

$4.95 4.95 3.95 4.9580 SK73111 SK73442 SK73552 MT90080

$4.95 4.95 3.95 4.9560 SK73110 SK73441 SK73551 MT90060

$4.95 4.95 3.95 4.9540 SK73109 SK73440 SK73550 MT90040

$4.95 4.95 3.95 4.95

The Skil Octo® Sander has proven to be an interesting item with plenty of uses around thehome in in the wood shop. To get the best possible performance out of this sander, besure to use only Klingspor Abrasives. The sanding accessories for the Octo® sander areproduced from our world famous aluminum oxide stearate material which offers no load-ing, fast cutting, and long life.

Skil Octo® Sandpaper

PS 33 KO- 10 PACKS

Diane from North Branch, NY - "I have ordered sandingdiscs several times and was always

happy with your products and prompt service."

50


DISC SANDING

Here’s our best cloth disc material for the largestationary disc sanders from Powermatic andGeneral. This aluminum oxide cloth will performwell and last longer than virtually any other disc outthere. The PSA (sticky) backing is convenient for these large diameter disc sanders.

20" Premium Cloth PSAAluminum Oxide Discs

EACH 220 Grit 180 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# AD51900 AD51868 AD51837 AD51813 AD26732 AD26691

20" NH $14.95 14.95 14.95 14.95 14.95 14.95

Grit 5" 6" 8" 9" 10" 12"220 AD26876 AD26877 AD26880 AD26881 AD26882 AD26883

$4.95 5.95 10.45 12.95 15.95 22.50 180 AD51859 AD51861 AD51863 AD51865 AD51866 AD51867

$4.95 5.95 10.45 12.95 15.95 22.50150 AD51845 AD51847 AD51849 AD51850 AD51851 AD51852

$4.95 5.95 10.45 12.95 15.95 22.50120 AD51824 AD51827 AD51853 AD51831 AD51832 AD51833

$4.95 5.95 10.45 12.95 15.95 22.50100 AD51802 AD51804 AD51806 AD51807 AD51808 AD51809

$4.95 5.95 10.45 12.95 15.95 22.5080 AD51775 AD51777 AD51779 AD51781 AD51783 AD51784

$5.05 6.25 10.85 13.65 16.85 23.75 60 AD51750 AD51751 AD51753 AD51754 AD51755 AD51757

$5.25 6.65 11.35 14.45 17.75 25.1550 AD26644 AD26645 AD26648 AD26650 AD12665 AD26652

$5.45 6.95 11.85 15.25 18.75 26.6540 AD51731 AD51733 AD51734 AD51735 AD51736 AD51737

$5.75 7.35 12.35 16.15 19.85 28.1536 AD51712 AD51714 AD51716 AD51717 AD51718 AD51719

$5.95 7.75 12.95 17.00 20.65 31.25

COMBO AD00005 AD00006 AD00008 AD00009 AD00010 AD000124 PACK $6.95 7.95 12.95 14.95 17.95 24.95COMBO PACK INCLUDES ONE EACH OF 60 GRIT, 100 GRIT, 150 GRIT & 220 GRIT

Our PSA discs are made of full resin bondedAluminum Oxide, heavy cloth backedmaterial along with an adhesive thatholds fast yet does not gum up your back-ing pad. Our competitors often use inferi-or materials or scrap in the manufacture oftheir discs. We at Klingspor’s WoodworkingShop use only top quality industrial goods.You get an extended grit range so that youpick the perfect finish every time. Priced in packs of 5.

Cloth PSA Discs

50 Pack

Silicon Carbide B WeightStearateDisc Rolls—100 Quantity

5" 6"Grit no holes no holes400 SD08672 SD08822

$20.95 25.95320 SD06335 SD08221

$20.95 25.95240 SD08813 SD08818

$20.95 25.95220 SD06279 SD08814

$20.95 25.95180 SD06278 SD08704

$20.95 25.95150 SD08637 SD08821

$20.95 25.95120 SD06276 SD08608

$20.95 25.95100 SD08446 SD08820

$20.95 25.9580 SD06520 SD08575

$20.95 25.95

Aluminum OxideB/C Weight Stearate100 Quantity

5" 6"Grit no holes no holes1500 SD21170 SD21196

$20.95 25.951200 SD21169 SD21195

$20.95 25.951000 SD21168 SD21194

$20.95 25.95800 SD21167 SD21193

$20.95 25.95600 SD21166 SD21192

$20.95 25.95400 SD21165 SD21191

$20.95 25.95320 SD21164 SD21190

$20.95 25.95220 SD21157 SD21188

$20.95 25.95180 SD21154 SD32511

$20.95 25.95150 SD32509 SD32510

$20.95 25.95120 SD25141 SD25142

$20.95 25.95100 SD25139 SD25140

$20.95 25.9580 SD25138 SD25137

$20.95 25.95

PSA DiscRolls

5" 5" 6"no holes 5 holes no holes

1500 Grit SD81011 SD82006 SD81023$11.95 11.95 15.45

1200 Grit SD81010 SD82005 SD81022$11.95 11.95 15.45

1000 Grit SD81009 SD82004 SD81021$11.95 11.95 15.45

800 Grit SD81008 SD82003 SD81020$11.95 11.95 15.45

600 Grit SD81007 SD82002 SD81019$11.95 11.95 15.45

400 Grit SD81005 SD82001 SD81017$11.95 11.95 15.45

320 Grit SD40008 VD41881 SD50008$11.95 11.95 15.45

220 Grit SD40006 VD40073 SD50006$11.95 11.95 15.45

180 Grit SD40005 VD39843 SD50005$11.95 11.95 15.45

150 Grit SD40004 VD38821 SD50004$11.95 11.95 15.45

120 Grit SD40003 VD39278 SD50003$11.95 11.95 15.45

100 Grit SD40002 VD40992 SD50002$11.95 11.95 15.45

80 Grit SD40001 VD38820 SD50001$11.95 11.95 15.45

60 Grit SD40000 VD47862 SD50000$11.95 11.95 15.45

PSA Paper Stearate AluminumOxide Discs

Our discline continues togrow with theaddition of these 9"discs for your belt/disc combinationmachines. The discs are made of our pre-mium aluminum oxide material on a heavyweight paper backing for extended life andconsistency of finish. In addition, this mate-rial is antistatic so there is less clogging ofthe abrasive. These are an great alterna-tive to the higher priced cloth backed discs.

9" HeavyweightDiscs

5 PACK 9" PSA 9" K/OGrit no holes no holes320 AD06131 KD90366

$7.95 9.95220 AD06092 KD78384

$7.95 9.95180 AD06077 KD90365

$7.95 9.95150 AD06061 KD70686

$7.95 9.95120 AD06045 KD57795

$7.95 9.95100 AD09219 KD40301

$7.95 9.9580 AD09206 KD55148

$7.95 9.9560 AD09174 KD60318

$7.95 9.9540 AD05934 KD57008

$7.95 9.95

No AirShipments!

DISC SANDING


51Stearate Kling-On® Discs for Small Hook & Loop PadsFlexible, non-loading discs. Great for woodturning!

Discs for Sanding on the Lathe- Klingspor’s Woodworking Shop has laid out a tremendous variety of

discs and accessories for use on the lathe. Try some of these today tocomplete your vessel turnings.

GRIT 1" 11/2" 2" 3"1500 10 Pack KD40015 KD11915 KD50015 KD60015

$2.75 3.25 3.75 4.4550 Pack KD61915 KD60915 KD62915 KD63915

$6.75 8.55 10.95 13.951200 10 Pack KD40014 KD11912 KD50014 KD60014

$2.75 3.25 3.75 4.4550 Pack KD61912 KD60912 KD62912 KD63912

$6.75 8.55 10.95 13.951000 10 Pack KD40013 KD11910 KD50013 KD60013

$2.75 3.25 3.75 4.4550 Pack KD61910 KD60910 KD62910 KD63910

$6.75 8.55 10.95 13.95800 10 Pack KD40012 KD11800 KD50012 KD60012

$2.75 3.25 3.75 4.4550 Pack KD60600 KD60800 KD62800 KD63800

$6.75 8.55 10.95 13.95600 10 Pack KD40011 KD11600 KD50011 KD60011

$2.75 3.25 3.75 4.4550 Pack KD61600 KD61800 KD62600 KD63600

$6.75 8.55 10.95 13.95400 10 Pack KD40010 KD11400 KD50010 KD60010

$2.75 3.25 3.75 4.4550 Pack KD61400 KD60400 KD62400 KD63400

$6.75 8.55 10.95 13.95320 10 Pack KD40009 KD11320 KD50009 KD60009

$2.75 3.25 3.75 4.4550 Pack KD61320 KD60320 KD62320 KD63320

$6.75 8.55 10.95 13.95240 10 Pack KD40008 KD11240 KD50008 KD60008

$2.75 3.25 3.75 4.4550 Pack KD61240 KD60240 KD62240 KD63240

$6.75 8.55 10.95 13.95220 10 Pack KD40007 KD11220 KD50007 KD60007

$2.75 3.25 3.75 4.45 50 Pack KD61220 KD60220 KD62220 KD63220

$6.75 8.55 10.95 13.95180 10 Pack KD40006 KD11180 KD50006 KD60006

$2.75 3.25 3.75 4.4550 Pack KD61180 KD60180 KD62180 KD63180

$6.75 8.55 10.95 13.95150 10 Pack KD40005 KD11150 KD50005 KD60005

$2.75 3.25 3.75 4.4550 Pack KD61150 KD60150 KD62150 KD63150

$6.75 8.55 10.95 13.95120 10 Pack KD40004 KD11120 KD50004 KD60004

$2.75 3.25 3.75 4.4550 Pack KD61120 KD60120 KD62120 KD63120

$6.75 8.55 10.95 13.95100 10 Pack KD40003 KD11100 KD50003 KD60003

$2.75 3.25 3.75 4.4550 Pack KD61100 KD60100 KD62100 KD63100

$6.75 8.55 10.95 13.9580 10 Pack KD40002 KD11080 KD50002 KD60002

$2.75 3.25 3.75 4.4550 Pack KD61080 KD60080 KD62080 KD63080

$6.75 8.55 10.95 13.9560 10 Pack KD40001 KD11060 KD50001 KD60001

$2.75 3.25 3.75 4.4550 Pack KD61060 KD60060 KD62060 KD63060

$6.75 8.55 10.95 13.95

Heavyweight Kling-On® Discs for Small Hook & Loop PadsHeavier Backing! Longer Lasting!

GRIT 1" 11/2" 2" 3"400 10 Pack KD10010 KD41400 KD20010 KD30010

$3.75 4.25 4.75 5.7550 Pack KD81400 KD80400 KD82400 KD83400

$8.95 10.45 11.95 15.95320 10 Pack KD10009 KD41320 KD20009 KD30009

$3.75 4.25 4.75 5.7550 Pack KD81320 KD80320 KD82320 KD83320

$8.95 10.45 11.95 15.95240 10 Pack KD10008 KD41240 KD20008 KD30008

$3.75 4.25 4.75 5.7550 Pack KD81240 KD80240 KD82240 KD83240

$8.95 10.45 11.95 15.95220 10 Pack KD10007 KD41220 KD20007 KD30007

$3.75 4.25 4.75 5.7550 Pack KD81220 KD80220 KD82220 KD83220

$8.95 10.45 11.95 15.95180 10 Pack KD10006 KD41180 KD20006 KD30006

$3.75 4.25 4.75 5.7550 Pack KD81180 KD80180 KD82180 KD83180

$8.95 10.45 11.95 15.95150 10 Pack KD10005 KD41150 KD20005 KD30005

$3.75 4.25 4.75 5.7550 Pack KD81150 KD80150 KD82150 KD83150

$8.95 10.45 11.95 15.95120 10 Pack KD10004 KD41120 KD20004 KD30004

$3.75 4.25 4.75 5.7550 Pack KD81120 KD80120 KD82120 KD83120

$8.95 10.45 11.95 15.95100 10 Pack KD10003 KD41100 KD20003 KD30003

$3.75 4.25 4.75 5.7550 Pack KD81100 KD80100 KD82100 KD83100

$8.95 10.45 11.95 15.9580 10 Pack KD10002 KD41080 KD20002 KD30002

$3.75 4.25 4.75 5.7550 Pack KD81080 KD80080 KD82080 KD83080

$8.95 10.45 11.95 15.9560 10 Pack KD10001 KD41060 KD20001 KD30001

$3.75 4.25 4.75 5.7550 Pack KD81060 KD80060 KD82060 KD83060

$8.95 10.45 11.95 15.95

Sander Sitter

SANDER SITTER#BX10000 ......................$24.95

• Heavier rubber cushion pad for more stability• Smoother and quieter bearings with

“lubriplate”• All new “spin control adjustmentDon’t ever stop in the middle of a sanding projectagain. This is a great new way to save time andmoney. The Sander Sitter is a landing pad for yourR.O. Sander and it works great. Just sit your 5"sander on the pad and watch it do it’s magic. Thebest thing is that the sandpaper is being cleaned asit is resting in the pad. Don’t delay. This is a must forall woodworking shops that have 5" Sanders.

Thomas from Medford, OR –“I have dealt with Klingspor offand on for many years from different parts of the country

and have never been disappointed with the service orthe products. I remember when you folks started with

only sandpaper. Keep it up.”

52


DISC SANDING

2" 3"Grit no holes no holes400 10 Pack KD50060 KD60066

$3.85 4.6550 Pack KD54400 KD64400

$13.95 16.95320 10 Pack KD50059 KD60059

$3.85 4.6550 Pack KD54320 KD64320

$13.95 16.95220 10 Pack KD50057 KD60057

$3.85 4.6550 Pack KD54220 KD64220

$13.95 16.95180 10 Pack KD50056 KD60056

$3.85 4.6550 Pack KD54180 KD64180

$13.95 16.95150 10 Pack KD50055 KD60055

$3.85 4.6550 Pack KD54150 KD64150

$13.95 16.95120 10 Pack KD50054 KD60054

$3.85 4.6550 Pack KD54120 KD64120

$13.95 16.95100 10 Pack KD50053 KD60053

$3.85 4.6550 Pack KD54100 KD64100

$13.95 16.9580 10 Pack KD50052 KD60052

$3.85 4.6550 Pack KD54080 KD64080

$13.95 16.9560 10 Pack KD50051 KD60051

$3.85 4.6550 Pack KD54060 KD64060

$13.95 16.95

Improvements to sanding techniques often seemfew and far between. The addition in the past cou-ple of years, of the soft sanding pads wasreceived with great enthusiasm. Turners wereespecially excited, but great care had to be takento make sure that the edges of the discs didn’tgouge the workpiece. So here’s the answer tothat problem – our Scalloped-Edge discs. Thescalloped edges wrap around the edge of thesanding pad so there’s no sharp disc edge toscratch your work.These discs are made from our most popularsanding material- the now-famous KLINGSPORaluminum oxide stearate. You’ll realize exception-al life along with exceptional finishes.

Sponge PadsThese foam pads are much softer and conformbetter to severe contours. Max RPMs 1500.

Bowl turners, this is it! This is a high-density, yet soft, discpad that affords you extra-long life. You bowl turners knowthat getting into the corners and rounded areas of your bowlas it’s on the lathe is one of the biggest concerns. With theuse of Kling-On® (hook & loop) discs you’ve now got anextremely convenient way to change grits and keep thesanding process going. We’re sure you’ll find a number ofother uses for these so—don’t miss out on these spongepads. Max RPMs 1500.

Hook & Loop Pads For Bowl Sanding

HOOK & LOOP1" #FP25100 ..................$9.952" #FP50200 ................$12.953" #FP75200 ................$12.95

SET OF 3 (1 OF EA.)#FP30000 ........................$26.85

B.

A.

C.

A. SPONGE PAD PSAWITH SPINDLE

2" SOFT #FR71003........$8.953" SOFT #FR71005........$9.951" MEDIUM #FR71000........$8.952" MEDIUM #FR71002........$8.953" MEDIUM #FR71004........$9.95

B. SPONGE PAD HOOK & LOOPWITH SPINDLE

1.5" SOFT #FR71500........$7.952" SOFT #FR72000........$8.953" SOFT #FR73000........$9.953.5" SOFT #FR73400......$10.955" SOFT #FR73001......$15.95SPONGE PAD SOFT SET1 each of 1.5", 2" and 3#FR73999 ............................$21.95

C.2" MEDIUM #FR72001........$8.953" MEDIUM #FR72999........$9.955" MEDIUM #FR73002......$15.95

INTERFACE PAD HOOK & LOOPEXTRA THICK - Great for addingextra cushion to your sanding pads3" PAD x 1/2" THICK#FR73301 ................................$5.953" PAD x 1" THICK#FR73300 ................................$5.955" x 5 Hole PAD x 1/2" THICK#FR50505 ................................$6.955" x 5 Hole PAD x 1" THICK#FR50506 ................................$8.955" x 8 Hole PAD x 1/2" THICK#FR50808 ................................$6.955" x 8 Hole PAD x 1" THICK#FR50809 ................................$8.95

HOOK & LOOP HAND HOLDER(BONE SHAPED) 1/2" thick mediumfoam pad for use with 2" or 3" discs #FR73302..............................$10.95

This is the ideal sanding tool forwood turners. A 2" diameterVelcro pad, with 90degrees of adjustability,attached to a 9" ash han-dle allows the turner to thor-oughly sand the turning while it isstill on the lathe. The rotation of thework piece itself spins the sandingpad. The Sandmaster is a fast andefficient way to sand bowls andplatters without getting the tradition-al radial sanding lines. Once youhave the turning thoroughly sand-ed, a goblet buff can replace the

Velcrosanding pad.

This tool not only saves theturners time, but also gives

better results. Sandmasterincludes 10 disc assortment.

Sorby Sandmaster

SORBY SANDMASTER#SZ00036 ......................$54.95HARD H&L FLEXI-PADNON-TAPERED2" #FP50200 ................$12.953" #FP75200 ................$12.95

Scalloped DiscsHook & Loop Paper

Our new Tool Zone Angled Drilloffers a unique, ergonomic shape.The 55 degree angled chuck of thedrill makes it just the right tool foreasy access to confined workingareas.The design is well-suited for avariety of tasks, but many bowl turn-ers are finding this to be the idealtool for bowl sanding. Simply chuckin one of our sponge pads and you’llsee how easy it can be to sand intothe internal curves of the bowl. Thecomfortable grip with a convenientpaddle switch fits well in the hand

and makes it easier to use forextended periods of time.Heat treat-ed, precision-cut gears ensure thatpower is properly and smoothlytransferred to the 3/8” reversiblechuck. This exceptional drill is also agreat tool for tradesmen who wouldoften need to drill into spots that arenot easily accessible with a conven-tional drill. 0-1400 no-load rpms3.8 amps

TOOL ZONE 3/8"ANGLED DRILL#TZ20000 ..................$59.95

3/8" Angled Drill Perfect For Sanding Turned Bowls

Brad from Canton GA - This is the third time I havereceived products from you.Each time I have been

notified of the order and then the shipping information.Each time the shipment has been delivered within daysof ordering. I want to commend you on doing business

with the customer as the foremost consideration.I will continue to order from your site.

In shortly over a decade, Crown Tools have evolved asone of the finer manufacturers of high quality handtools. Although a relative newcomer to the toolindustry, the staff behind the scenes has been intool manufacturing for nearly forty years.Crown manufactures the largest range ofhand tools in the UK. Their line covers allpoints of interest from wood carvingand turning to general woodworkingand building trades.Crown’s high-speed steel woodturn-ing tools have rapidly become favorites among many discerning woodworkers. Madefrom M2 high speed steel (Rockwell 62/64) and beech or rosewood handles, these toolsare comfortable to use and will hold an edge 6 times longer than a carbon steel tool.All of Crown’s marking, layout and carpentry tools also feature top quality materials suchas beech and rosewood handles, brass and tempered steel. Chisels and carving toolsare hot forged from the finest carbon steel and are honed ready for use. The Pro PMuses powdered metallurgy technology that offers a higher working hardness, superiorresistance and excellent grindability. Below is a small sampling of what is available.Check our website for a complete selection of Crown products.

Crown Turning Tools

3/4" ROUGHING GOUGE #CN00230 ..............................$49.9511/4" ROUGHING GOUGE#CN00231 ..............................$59.9513/4" ROUGHING GOUGE#CN10017 ..............................$79.953/8" BOWL GOUGE#CN00241 ..............................$49.951/2" BOWL GOUGE#CN00242 ..............................$59.951/2" BOWL GOUGE, ELLSWORTH 17"#CN24201 ..............................$89.951/16" PARTING TOOL #CN10018 ..............................$38.951/8" PARTING TOOL #CN00244 ..............................$38.953/16" DIAMOND PARTING TOOL#CN00246 ..............................$44.953/4" OVAL SKEW#CN00250 ..............................$39.953/4" SQUARE END SCRAPER#CN00254 ..............................$34.953/4" ROUND SIDE CUTTING TOOL#CN00265 ..............................$39.95

3/8" SPINDLE GOUGE#CN23600 ..............................$29.951/2" SPINDLE GOUGE #CN02312 ..............................$42.951/4" BEADING TOOL#CN00276 ..............................$39.953/8" BEADING TOOL#CN27600 ..............................$32.95

PRO PM3/8" SPINDLE GOUGE#CN00236 ..............................$44.951/2" SPINDLE GOUGE#CN00237 ..............................$48.951/4" BOWL GOUGE#CN00240 ..............................$56.953/8" BOWL GOUGE#CN24100 ................................62.951/2" BOWL GOUGE#CN24200 ..............................$76.953/4" ROUGHING GOUGE#CN10037 ..............................$84.95

5 PIECE WOODTURNING SET 280#CN00280 ....................$159.95

8 PIECE WOODTURNING SET 285#CN00285 ....................$249.95

5 PIECE MINIATURE SET 295#CN00295 ......................$99.95

3 PIECE PEN TURNING SET 296A#CN00296 ......................$79.95

1/2" ROUND NOSE SCRAPER#CN00260 ......................$39.953/4" ROUND NOSE SCRAPER#CN00261 ......................$49.9511/2" ROUND NOSE SCRAPER#CN02562 ......................$69.95

SKEWCHIGOUGE#CN10020 ......................$34.95

If you turn, your shop can’t be with out a cen-ter finder. It helps save wood and makes turn-ing a lot more safe.

Center Finder

CENTER FINDER#BH19068........................$5.95

LATHE ACCESSORYCHUCK #2 MT 0-1/2"#WT18527..................$22.95

Handy Accessories#2 MT SPUR DRIVE CENTER#J708330 ........................$22.95#2 MT BALL BEARINGLIVE CENTER#J708331 ........................$24.95

STRONGHOLD CHUCK#ON2137 ......................$289.95*TALON CHUCK#ON2985 ......................$234.95*

* Price includes adapter#3 JAWS /STRONGHOLDcompresses 37/8" to 51/4" / expands 41/2" to 6"#ON2106 ..........................$54.95#3 JAWS /TALONcompresses 27/8" to 45/8"/expands 33/8" to 47/8"#ON3015 ..........................$49.95JUMBO JAWS/STRONGHOLDcompresses 23/4" to 11" / expands 43/4" to 12"#ON2136 ..........................$98.95JUMBO JAWS/TALON compresses 27/8"to 103/4" / expands 47/8" to 113/4"#ON2047 ..........................$98.95

STEP JAWS/ TALON compresses 3/8" to 17/8" / expands 1" to 23/8"#ON2156 ..........................$40.95MINI JUMBO JAWS/TALONcompresses 2" to 77/8" / expands 4" to 97/8"#ON2967 ..........................$93.95

The Talon chuck’s lightweight andcompact size make it ideal for thesmall to medium lathe. The chuckis only 31/2" in diameter andweighs slightly more than 3pounds and is self-centering. Aone handed operation tightensthe 5 to 1 ratio chuck with plenty ofclamping power.If you are turning large, heavybowls, the Stronghold chuck is thebest choice. Although it has manyfeatures in common with theTalon, it is 41/2" in diameter and

weighs around 8 pounds making it ideal for largerlathes and larger turnings.

ONEWAY #2MT LIVE CENTER#ON2064 ........................$120.95

Oneway Lathe Chucks

Once only found in the top quality grinders onthe market, now the Crush Grind Mechanismis available to the typical do-it-yourselfer.Crush Grind is the original ceramic mill mech-anism and comes with a 25 year warranty. It’sfully adjustable, fine and coarse, and will neverrust. Crush Grind will work with salt, pepperand spices. The CG11100 design allows for amill up to 8" and the CG26000 can be trimmedto fit mills from 4" to 12". Mechanisms comewith complete instructions.

CRUSH GRIND 10" SHAFT MECHANISM #CG26000..............$16.95

Crush Grind MechanismMake your own pepper mills

53


TURNING

54


TURNING

Robert Sorby is the world’s premier manufacturer of specialist woodworking tools with aheritage that dates back over two hundred years. Throughout that time, the policy atRobert Sorby has been to produce tools at unrivaled quality, such that they remain thetools by which all others are judged. Robert Sorby produces more woodturning tools thananyone else in the business. They also manufacture the tools themselves, no tools aresourced out from second hand manufacturers. All Sorby turning tools are produced fromM2 high speed steel and feature top quality ash handles.

Robert Sorby Turning Tools

HOLLOWMASTER KIT - RS230KT#SZ00001 ..................................$79.95ROUND END SWIVEL TIP - RS211C#SZ00002 ..................................$15.95FULL ROUND SCRAPER TIP-RS230C#SZ00003 ..................................$15.95

FINGERNAIL BOWL GOUGE- 842FLH1/4" #SZ00006..........................$54.953/8" #SZ00007..........................$72.951/2" #SZ00008 ..........................$84.95

FINGERNAIL SPINDLE GOUGE - 840FH3/8" #SZ00009 ..........................$40.951/2" #SZ00010 ..........................$50.95

SWAN NECK HOLLOWING TOOL855H 20" #SZ00021 ................$59.95859H 24" #SZ00022 ................$64.95REPLACEMENT TIP #SZ00042 ..................................$14.95

SPIRALLING SYSTEM - 330H#SZ00026 ............................$189.95

A DOUBLE COVE TIP 3/8" &5/8" - RS235C#SZ00016........................$19.95

B DOUBLE COVE TIP 1/4" & 1/2"- RS238C#SZ00017 ......................$19.95

C RECESS TIP 45 & 60 DEGREE- RS234C#SZ00018 ......................$19.95

D DOUBLE BEAD TIP 3/8" & 5/8"- RS236C#SZ00019 ......................$19.95

E DOUBLE BEAD TIP 1/4" & 1/2"- RS239C#SZ00020 ......................$19.95

CONVEX SCRAPER CUTTER - 827C #SZ00014 ..................................$14.95MULTI TIP HOLLOWING TOOL -RS200KT #SZ00015 ................$89.95TEAR SHAPED SCRAPER - RS200C#SZ00089 ..................................$15.95ROUND END SWIVEL TIP - RS211C#SZ00002 ..................................$15.95

ROUND SKEW CHISEL - 813H1/4" #SZ00004..........................$34.953/8" #SZ00005..........................$39.95

FLUTED PARTING TOOL 3/16" - 832H#SZ00011 ..................................$69.95

PARTING TOOL - 830H1/8" #S83042 ............................$39.951/4" #S83043 ............................$46.95

MICRO HOLLOWING SETThis handy set is ideal for the turner producingminiature boxes or hollow forms. It utilizes thesame anodized aluminum handle as the othermicro set. With the introduction of a specificallydesigned micro boring tool for initial wasteremoval, a micro swan neck hollowing tool anda micro round nose scraper, this hollowing setgives the woodturner the ability to hollow outdelicate vases.#SZ00130 ..............................$54.95

MICRO SPINDLE SETHaving interchangeable blades makes this setan attractive set for any woodturner wanting toturn fine intricate spindle pieces. The set com-prises an aluminum handled and 1/2" (13mm)gouge for roughing down and basic shape anddesign. A 1/4" (6mm) skew for fine detail and a5/32" (4mm) beading & parting tool for detailingand parting off. Ideal for pen turners.

#SZ00131 ..............................$54.95

MICRO SPIRALLING SYSTEM#SZ00133 ..............................$69.95MICRO TEXTURING CUTTER#SZ00132 ..............................$16.95

MICRO SANDMASTER SETThe micro Sandmaster comprises of an alu-minum handle, micro Sandmaster head, 1"(25mm) foam pad and eight abrasive discs, twoof each of the 120, 180, 240 and 400 grits , twoAllen keys and an instruction leaflet.#SZ00134 ..............................$54.95See page 51 for KLINGSPOR 1" discs

6PC BEGINNERS SET - 67HS#SZ00090 ................................$259.95

MICRO TURNING SET - 45HSIncludes 1/4" and 1/8" Spindle Gouge,1/4" Round Nose Scraper, 1/4" skewChisel and 1/16" Parting Tool#S4500......................................$129.95

ROUGHING OUT GOUGE - 843H3/4" #S84348 ..............................$69.9511/4" #S84349 ..............................$94.95

BOWL GOUGE - 842LH1/4" #S84243............................$59.953/8" #S84245............................$69.951/2" #S84246............................$84.95

SPINDLE GOUGE - 840H1/4" #S84043............................$39.953/8" #S84045............................$42.951/2" #S84046............................$52.95

BEDAN PARTING TOOL 3/8" - 834H#S83445......................................$50.95

CHATTERTOOL W/3 CUTTERS -RS215KT #SZ00064..................$69.95

F

F 28" SWIVEL TIP PROBE - 8803H#SZ00025 ......................$99.95

45° SHEAR SCRAPER - 826H#SZ00012 ..................................$42.95

OVAL SKEW - 809H3/4" #S80948............................$50.951" #S809410..........................$60.95

55


PEN TURNING

1-9 10-24 25+A. FANCY PEN KIT /GOLD #XR30000 ........$3.25 ........$2.75 ........$2.45B. FANCY PENCIL KIT /GOLD #XR30002 ........$3.75 ........$3.25 ........$2.95C. COMFORT PEN KIT /GOLD #XR40000 ........$3.95 ........$3.45 ........$2.90D. COMFORT PENCIL KIT /GOLD #XR40001 ........$4.49 ........$3.95 ........$3.65E. CIGAR PEN KIT /GOLD #XR60000 ........$5.95 ........$4.95 ........$4.65F. EURO PEN KIT /GOLD #XR00009 ........$5.45 ........$4.75 ........$4.45G. DESIGNER TWIST

PENCIL KIT /GOLD #XR15000 ........$5.95 ........$5.25 ........$4.85H. PREMIUM DESIGNER PEN

KIT /GOLD #XR16000 ........$5.65 ........$4.95 ........$4.75I. CEO TWIST PEN KIT /GOLD #XR17000 ........$6.25 ........$5.45 ........$5.15J. CLASSIC FOUNTAIN PEN

KIT /GOLD #XR18000 ........$6.25 ........$5.45 ........$5.15K. CLASSIC TWIST PEN KIT /GOLD #XR19000 ........$6.25 ........$5.45 ........$5.15L. CLASSIC ROLLERBALL

PEN KIT /GOLD #XR20000 ........$6.25 ........$5.55 ........$5.25M. TEACHER PEN KIT /GOLD #XR22000 ........$4.45 ........$3.95 ........$3.65N. KEY RING KIT /GOLD #XR23000 ........$2.95 ........$2.60 ........$2.35O. POLARIS TWIST PEN KIT /GOLD #XR28000 ........$6.75 ........$5.95 ........$5.65

ALL QUANTITY PRICE BREAKS ARE ON SAME ITEM ONLY - NO MIX AND MATCHING.

Pen MakingPen making has become one of the fastest segments of woodworking. Notonly is it a satisfying hobby for the novice, it can also be lucrative for the moreexperienced turner. They require little investment and custom made pensmake great gifts that will last a lifetime.We have several styles to choose fromand each kit comes with detailed instructions.

ACCESSORIES FOR KITSMANDREL #1 MT #XR80000........$24.95MANDREL #2 MT #XR80001........$24.95 REPLACEMENT SHAFT#XR80002..........................................$9.95TUBE INSERTION TOOL#XR80007........................................$10.95PEN DISASSEMBLER 7MM#XR80008........................................$19.95SLIMLINE BUSHING #XR50000 ....$5.95CIGAR BUSHING #XR50001 ..........$5.95EURO BUSHING #XR50002 ..........$5.95

CLASSIC TWIST BUSHING#XR50003..........................................$5.95BUSHING /PREMIUM DESIGN#XR80006..........................................$6.95BUSHING /CEO PEN#XR80004..........................................$6.95BUSHING /CLASSIC ROLLER#XR80009..........................................$6.95BUSHING /POLARIS PEN#XR80003..........................................$6.95BUSHING /COMFORT PEN#XR80010..........................................$6.95

Use the Pen Mill Kit to square off the end ofthe pen blank and tubes prior to final assem-bly. The kit includes a 3/4" squaring cutter, a7mm, 8mm, 9mm and 10mm pilot cutter,allen wrench and sleeve adaptor.

7 PIECE PILOT PEN MILL#XR43000..............................$35.95

3/4" X 3/4" X 5" PEN BLANKS - 10PK

A.B. C. D. E. F.

G. H. I. J. K.

L. M. N. O.

AFRICAN PADAUK#TS20000 ............$9.95

BLOODWOOD#TS20001 ..........$10.95

BOCOTE#TS20002 ..........$12.95

BUBINGA#TS20003 ............$9.95

COCOBOLO#TS20004 ..........$14.95

EBONY#TS20005 ..........$28.95

KINGWOOD#TS20006 ..........$19.95

OLIVEWOOD#TS20007 ..........$18.95

PINK IVORY#TS20008 ..........$19.95

PURPLEHEART#TS20009 ............$9.95

ZEBRAWOOD#TS20010 ..........$12.95

Gordon from Sparta, TN - "Just started to turn on a lathe, hope to bedoing a life time of business with Kingspor!"

56


TURNING/CARVING

SOVEREIGN SYSTEM 16" W/3/8 & 1/2 COL #SZ10000 ......$89.95SOVEREIGN SYSTEM 22" W/3/8 & 1/2 COL #SZ10001 ......$99.95SOVEREIGN SYSTEM 16" HAN-DLE ONLY #SZ10002............$69.95SOVEREIGN SYSTEM 22" HAN-DLE ONLY #SZ10003............$79.95SOVEREIGN COLLET 3/8"#SZ10004 ..............................$17.95SOVEREIGN COLLET 1/2"#SZ10005 ..............................$17.95SOVEREIGN COLLET 1/4" PILOTBORED #SZ10006 ................$17.95SOVEREIGN COUNTERWEIGHT#SZ10007 ..............................$16.95SOVEREIGN SIDE HANDLE#SZ10008 ..............................$19.95SOVEREIGN THREADEDCOUPLER #SZ10009............$19.95

TOOL INSERTSBOWL GOUGE 1/4" (842)#SZ10010 ..............................$38.95FINGERNAIL BOWL GOUGE 1/4"(842F) #SZ10011 ..................$38.95BOWL GOUGE 3/8" (842)#SZ10012 ..............................$52.95FINGERNAIL BOWL GOUGE 3/8"(842F) #SZ10013 ..................$52.95BOWL GOUGE 1/2" (842)#SZ10014 ..............................$64.95

FINGERNAIL BOWL GOUGE 1/2"(842F)#SZ10015 ....................$64.95BOWL GOUGE 3/4" (842)#SZ10016 ..............................$74.95X-LONG BOWL GOUGE 1/2" (8427)#SZ10017 ..............................$76.95X-LONG BOWL GOUGE 3/4" (8427)#SZ10018 ..............................$89.95SPINDLE GOUGE 3/8" (840)#SZ10019 ..............................$28.95FINGERNAIL SPINDLE GO 3/8"(840F) #SZ10020 ..................$28.95SPINDLE GOUGE 1/2" (840)#SZ10021 ..............................$36.95FINGERNAIL SPINDLE GO 1/2"(840F) #SZ10022 ..................$36.95LONG & STRONG SPINDLE 3/8"(841) #SZ10023......................$42.95LONG & STRONG SPINDLE 1/2"(841) #SZ10024 ....................$48.95MULTI TIP HOLLOWING TOOL W/3TIPS #SZ10025......................$74.95MIDI MULTI TIP HOLLOWINGTOOL #SZ10026 ..................$67.95X-LONG MULTI TIP HOLLOWINGTOOL #SZ10027..................$84.95HOLLOWMASTER W/2 TIPS#SZ10028 ..............................$64.95MIDI HOLLOWMASTER W/2 TIPS#SZ10029 ..............................$57.95 X-LONG HOLLOWMASTER W/2TIPS #SZ10030......................$79.95

Sovereign is a new handle system forwoodturners. Like all other Robert Sorbyproducts it is made in Sheffield to themost exacting engineering standards.Sovereign is the name of the inter-changeable handle which comes in twolengths - 16" and 22". The handles aremade of aluminium and alloy in combi-nation to give the best of strength, bal-ance and vibration dampening qualities.Each handle comes with a durableSoftex grip for extra comfort. Additionalknurling provides a further non-slip sur-face. Both handles will take turning chis-els with a 5/8" diameter shaft. Alsoincluded are 3/8" and 1/2" collets toaccept tools with those diameters there-by allowing the turner to use hisSovereign for a whole host of differentchisels. The Sovereign handles and col-

Foredom’s new Belt SanderAttachment is the perfect accessory foranyone who owns a Foredom PowerCarver. The Belt Sander Attachmentcan be used free hand of secured to awork surface using the hand pieceholder. Made of high quality aluminumand permanently sealed ball bearings,the Belt Sander Attachment enable youto smoothly sand, grind and polishsmaller items of varying material in amuch more controlled manner. Theattachment is made to connect directlyto Foredom’s H.30 handpiece. If youdon’t have the H.30 handpiece, the BeltSander Attachment is available with thehandpiece included. Abrasive belts forthe attachment measure 9/32" x 10 1/8"

The Detail Knife has a very finepoint for making the very narrowcuts associated with detailing. Itsstraight 1-1/2" blade can accom-modate larger stock removal ifneeded. The mini-detail knife hasour smallest 3/4" straight blade. It ismade from ultra-thin material so asnot to disturb adjacent wood forvery delicate cuts.

BELT SANDER ATTACHMENT WITHOUTHANDPIECE Includes Abrasive Belts: 3-100G,4-180G, 3-240G #FO79721....................$79.00BELT SANDER ATTACHMENT WITH HAND-PIECE Includes Abrasive Belts: 3-100G, 4-180G,3-240G #FO79723 ..............................$129.00HANDPIECE HOLDER#FO00030..............................................$41.95

WHITTLER'S KIT KNIFE SET 2PC #KN300 ....................................$39.95

FLEXCUT SPECIAL EDITION FORGEDKNIFE SET #KN200 ................$249.95

Foredom Belt Sander Attachment

Whittler’s Kit Knife Set

Sorby Sovereign System

The mini pelican knife has a curved7/8" blade that offers a clean slicingaction similar to a skew. The point isnarrowed for a tight turning radiuswhile still being durable. Cuts verywell in hollow areas.The mini-detail knife has our smallest3/4" straight blade. It is made fromultra-thin material so as not to disturbadjacent wood for very delicate cuts.The mini-chip carving knife has a5/8" ultra thin blade, making unwant-ed chipping in delicate cuts less like-ly. The smaller handle is faceted withmultiple control points to allow them

to be held in a variety of comfortable positions

SLIM HANDLE DETAIL KNIFE SET 3PC#KN400 ............................................$59.95

Slim Handle Detail Knife Set

Flexcut has created a Special EditionForged Knife Set, which achieves thatrare blend of beauty, function and pre-cision technology.First and foremost, all of the knifeblades are state-of-the-art in this one-of-a-kind set. They are designed formaximum performance from the high-est quality steel. Each blade is preci-sion machined and drop-forged usingthe latest technology. It is triple heat-treated to make a hard cutting edgethat stays sharp. Each knife is expert-ly hand-sharpened and tested beforeshipping, so it’s ready to use right outof the box.

Each knife handle is made fromexquisite South American Bocotewood. The beauty of the grain isbrought out by a durable high-glossfinish. Each handle has top qualitynatural leather inlays for more grip-ping power and extra comfort.

Flexcut’s Special Edition woodcarv-ing knives come in a fine wooden dis-

play case custom madein Napa Valley. Eachcase has a contemporary plexiglass lid and afoam lining with cut outs for each knife to keepand protect your collection. A buckle-sized silverlogo completes the set, standing for Flexcut’sunwavering leadership and innovation in wood-carving products worldwide.

let system are ideal for quick change from onetool to another. At the same time they enablethe turner to lengthen or shorten the toollength. Sovereign systems consist of a handleand 2 collets.

Special Edition Forged Knife Set

57


CARVING

10 PIECE RIFFLER FILE SETMeasures 51/2" long.Random tips#BH13100........................$9.955 PIECE RIFFLER FILE SETMeasures 7" long.Random length.#BH13105........................$9.95

THUMB PROTECTOR#OC41500 ......................$1.95THUMB PROTECTOR X-LG#OC41599 ......................$1.95

Carving Knife

CARVING KNIFE17/8" Blade #RM10000 ............$16.9511/2" Blade #RM20000 ............$16.95

These hook knives allow carvers to work in hollowswith ease. They are ideal for spoon carvers.Handedness is designated by pulling tool toward you.

HOOK KNIFERIGHT HAND #KN26 ................$24.95LEFT HAND #KNL26 ..............$24.95

These US made Carving knives are the idealknives for both novice and veteran alike.Theprice makes them attractive to the beginnerand the quality keeps the veteran satisfied.Each knife is made from uniformly hardenedand tempered high carbon cutlery steel andis precision ground.

WHITTLING KNIFE11/2" Blade #RM30000 ..........$9.95

Hook Knife

A. The Crown Draw Knife is a heavy duty knife made of high quality, hardened and tempered steel.Perfect for many wood working applications, whether stock removal or the final shaping.CROWN 11" DRAW KNIFE #CN10001....................................$64.95B. With as much spring as Flexcut’s regular carving knives, this draw knife can be used to do hol-low or round work.The tool comes with a polished razor edge.5" FLEXIBLE DRAW KNIFE #KN16..........................................$39.95

A.

B.

11" DrawKnife & 5"FlexibleDraw Knife

These round head mallets are made of tough urethane that’snon-marring and quiet during use. The handles are very com-fortable and made of smoothly sanded maple. There are threeweights to choose from.

Mallets

ROUND HEAD MALLETS

Once only associated with duck and birdcarvers, woodburners are now used byeveryone from leather workers to woodworkers and on materials ranging from boneto gourds. The Cub woodburning unit is aneconomical way to get started in the art ofwood burning. The Cub’s handpiece, soldseparately, accepts many different tips. Tipsare available for a wide variety of applica-tions and effects. Temperature on the burn-ing unit is fully adjustable for different types ofwood and different tips.

Woodburning UnitWoodworker’s Branding IronConveniently Mark Your WorkA labor of love deserves recognition. As a finaltouch, add your own message or one of threetitles including your name to that finished piece.Though not a high volume model, this US made125-watt features ceramic insulated, nickel-chrome element, 3 prong plug, and hardwoodhandle suitable for use where lower temperaturesand fewer impressions are needed. Price includes2-week turnaround on branded brass head, stor-age case, tool stand, and user instructions.

WOODWORKER’SBRANDING IRON#CM12500................$62.95

CUB WOODBURNING UNIT(does not include handpiece)#CE99999 ..........$69.95

GUARD-TEX TAPE 3/4" x 30 yds.#GB41308......................$3.49

12 OZ #MW12000....$29.9518 OZ #MW18000....$33.95

20 OZ #MW20000....$34.9530 OZ #MW30000....$35.95

ROTATING BUR HOLDER#FO10082 .......................$18.95

Rotating Bur HolderA rotating bur and tool holder meant for seriouswoodcarvers! It will not only help organize your bits,but will help keep them from damage and gettinglost.The rotating holder will hold 92, 1/8" bits and 13,1/4" bits. In addition, there are 7 spaces for drill bitsranging from 1/16" to 5/32". A 3" x 23/4" center cupalso comes with holder and helps with storing smalltools such as files and screw drivers. Burs not included.

AccessoriesREPLACEABLE TIP HANDLE#CE99992 ......................................$15.95LONG M TIP RT-LM #CE99993 ......$7.95SPADE TIP RT-E #CE99994............$7.95

SHADING TIP RT-S #CE99995 ......$7.95WRITING TIP RT-C #CE99996 ......$7.95EZ TIP PULLER #CE99997 ............$5.95HANDPIECE CLIP #CE99998 ........$1.29

Woodburning Mega KitKIT Includes: #CE99992 Replaceable Tip Handle, #CE99993 Long M TipRT-LM, #CE99994 Spade Tip RT-E, #CE99995 Shading Tip RT-S,#CE99996 Writing Tip RT-C, #CE99997 EZ Tip Puller, #CE99998 HandPiece Clip, #CE99999 Cub Woodburning Unit #CE90000 ................$109.95

Flexcut Carvin’ JackThe Carvin’ Jack is an easy way to keep your whole carving kit with youat all times. The pocket-knife-like tool still uses the same spring steel asall the other Flexcut tools and contains six different profiles in one han-dle just over 4" long. It contains a detail knife, straight gouge, hookknife, V scorp, gouge scorp and chisel.

FLEXCUT CARVIN’ JACK RIGHT HAND#JKN91..........................................................................$109.95

A rasp in woodworking is a very versatile tool. It canallow you to shape and form areas of irregular shapesand grain patterns very quickly.Both rasps are 10" longand are designed for work in wood, plywood, wallboard, plastics and other materials. Theirhalf round edges and surfaces aretapered towards the point.The sur-faces are rasp cut and theedges are single cut.

10" HALF ROUND RASP / COARSE#SK21010 ............................$16.9510" CABINET RASP / FINE#SK31030 ............................$24.95

10" Rasps

58


CARVING

The SR series combines the best andmost important features, power,reversibility and reliability, into one motor.This motor, packaged with the 5240 kit,offers 33% more power than before. Itsreversibility is ideal for left handed usersand special techniques. Packaged in the5240 kit is a 47 piece accessory kit in arotating bur and tool holder plus a smallerround bur holder with a lid. Accessoriesinclude purple ceramic sanding bands &disc, V stones, ScotchBrite, radial bristledisc, typhoon carbide burs, CeramCutBlue Stones and more.

Foredom Flexible Shaft Motor Tool

Reciprocating ChiselForedom’s reciprocating chisel handpieceturns your Foredom rotary tool into aPower Chisel Carver. The easy to usechisel hand piece is recommended for usewith Foredom’s 1/3HP series TX or new1/6HP series SR motors and it attaches toany flex shaft machine with a standard keytip shaft. The chisel handpiece reachesoptimum performance when usedbetween 1000 and 8000 rpm. It’s also rec-ommended that the benchtop dial speedcontrol be used in place of the standardfoot pedal.

Now includesFur, Feathers

and Fins-A how to Powercarving

DVD from author andteacher Frank Russell.

A 3 disc, 3 Hourinstructional

FOREDOM FLEXIBLESHAFT MOTOR TOOL #FO5240 ..............................................$229.95#93 REPLACEMENT INNER SHAFT #FR00093........................$12.95

FLEXCUT 5 PIECE PALM TOOLKIT #SK106 ......................$44.95

FLEXCUT 11 PIECE PALM TOOLKIT #SK107 ......................$79.95

Flexible Steel CarvingToolsFlexcut carving tools have earned a high rep-utation over the years. Being made from highquality spring steel, the tools have a certainflexibility that allows you to get more fromeach tool compared to that of conventionalrigid carving tools. The cutting edge of eachtool is hardened and honed to razor sharp-ness and ready to use right out of the pack-age. These tools fit comfortably in the palmand are good for smaller projects and detailwork. Two kits of palm tools, a 5 pc and an 11pc, are offered in a durable tool roll. Each kitfeatures a handle and quick connect, inter-changeable blades.* Individual tools available online.

Scotch Brite Radial Bristle Disc’s thin, flexible bris-tles get into hard to reach areas without removingdetail or making flat spots. Carvers can remove thefuzz from their pieces without harming any of theunderlying details. The coarser grits can be used tocarve and texture while the finer grits will smooth,burnish and polish. Abrasive grains embeddedthroughout the bristles enable them to work fasterand last longer than other sanders and buffs. Theygenerate little or no dust nor the heat associatedwith rubber wheels and buffs. Although 5000 rpmsis ideal for wood carving, recommended speed formost applications is between 1,000 and 18,000rpms. 30,000 is the maximum speed.

RADIAL BRISTLE 3/4" KIT /10PCIncludes: 3 - 80grit, 3 - 400grit,3 - 6 micron & 1/16" mandrel#FO45190..............................$12.95RADIAL BRISTLE 1" KIT /10PCIncludes: 3 - 36grit, 3 - 80grit,3-120 micron & 1/8" mandrel#FO45390..............................$15.95

RADIAL BRISTLE - Discs only1/16" ARBOR HOLE 3/4" G120WHITE 6PK #FO45126..........$7.95

3/4" G220 RED 6PK#FO45136................................$7.953/4" G400 BLUE 6PK#FO45146................................$7.951/8" ARBOR HOLE 1" G120 YEL-LOW 6PK #FO45346..............$9.951" G80 WHITE 6PK#FO45356................................$9.951/8" MANDREL / 3/4" BRISTLEDISCS #FO45006..................$1.951/8" MANDREL / 1" BRISTLEDISCS #FO45020..................$1.95

Radial Bristle Disc

Carving & Whittling KitThese tool kits from Warren Cutlery contain highquality, razor sharp blades made from tungstenalloy tool steel.They are uniformly hardened andtempered to stay sharp and may be resharp-ened or even inexpensively replaced.The walnuthandles have 3 way locking chucks that willaccept blades or gouges.

CARVING KIT W/CASE: contains a wal-nut handle, 1 large blade, 6 blade assort-ment and 2 gouges.#WR10000............................$46.957 PC. BASIC WHITTLING KIT: containsa walnut handle and a 6 blade assort-ment #WR10001 ................$22.95

4 PC. BASIC WHITTLING KIT:contains a walnut handle and 3large blades#WR10002 ................$24.95

Engraving Set - Great for Wood Carving

Proxxon's engraver will help you createmore realistic carvings by giving you theability to produce more intricate detail.The engraver's small size and lightweight is most comfortable in the handand accepts small bits of all types (dia-mond, steel, and ceramic). This versa-tility allows you to construct the finest ofdetail, like duplicating a single hair. Thekeyless friction chuck makes changingbits quick and easy – a must for thosemaking a variety of different types of

cuts. This engraver is a welcome additionto any woodcarver's toolbox.

PROXXON ENGRAVING SET #PX38635 ..........................$49.95

NO. 50 CHISEL HANDPIECE WITH 6CHISELS #FO50100....................$79.95DIAL CONTROL WITH NO. 50 CHISELHANDPIECE#FO50001 ....................................$159.95CHISEL SET 6PC #FO50200 ....$39.95

These incredibly comfortable carv-ing knives are made of the samehigh quality steel as all otherFlexcut tools. They hold their edgefor a very long time. With their con-toured handle, these knives aresuited for long periods of carving.

SKEW KNIFE #KN11 ....$16.95 CUTTING KNIFE#KN12 ............................$17.95DETAIL KNIFE #KN13 ..$18.95ROUGHING KNIFE #KN14 ............................$19.95CHIP CARVING KNIFE#KN15 ............................$17.95PELICAN KNIFE#KN18 ............................$21.95

Flexible Steel Carving Knives

MINI PELICAN KNIFE #KN19....$22.95

HOOK KNIFERIGHT HAND #KN26..............$24.95LEFT HAND #KNL26..............$24.95

KNIFE SETDetail knife, cutting knife, pelicanknife, mini pelican knife #KN100 ..................................$69.95

Ray from Olin, ND – “BUY all my carving needs here.”

59


SHARPENING

Woodworkers of all skills are turning to Japanesewaterstones to keep their tool edges sharp. Not onlydo these stones cut very aggressively, but theycome in a comprehensive range taking care of allyour sharpening needs. All Japanese stones areman made which means they are free of impuritiesand have a very consistent grit size. Only water isneeded to lubricate the cutting stones. Since thestones are relatively soft, they are constantly expos-ing new grit with each stroke. Another benefit of thestone is the way they build up an abrasive sludgewhen used.This “loose” grit is what helps the stonesgive their excellent finish. No stropping or polishingcompound is needed when using these waterstonesbecause they polish as they hone.

Japanese Waterstones CompleteSharpening & Honing

JAPANESE WATERSTONES800g 8" x 21/2" x 11/4" #D1067 ......................$22.951000g 8" x 21/2" x 11/4" #D1068 ......................$22.951200g 8" x 21/2" x 11/4" #D1069 ......................$23.956000g 8" x 3" x 7/8" #D1070 ......................$39.958000g 8" x 3" x 7/8" #D1071 ......................$69.95Waterstone Holder#BH19048 ..................$19.951000/6000 combowaterstone#D1130 ......................$44.95

Work Sharp SharpeningSystem

The new Work Sharp WS3000 is a precisionwood tool sharpener that offers unmatchedaccuracy, ease of use and repeatability. Thisinnovative dry sharpening system producespredictable and accurate results every time ona wide variety of tools without affecting toolsteel temper. Various chisels, plane irons,lathe tools, carving tools and more can besharpened on the WS3000.Work Sharp’s repeatable sharpening portenables sharpening of 20, 25, 30 and 35degree angles on chisels and plane irons up to2" without the assistance of any jigs. All of theangles necessary are built in to the sharpeningport, not in a fixture or jig, so changing anglesis simple and fast. Also offered is a slotted“see through” wheel for sharpening of carvingand turning tools. You’ll be able to see the sur-face that you are grinding. Forced air coolingand the sharpening port heat sink allow forhigher removal rates without affecting the steeltemper. The WS3000 offers features that thediscerning woodworker expects anddemands. The Work Shop will quickly earn apermanent place on your workbench.

Use this diamond hone to reshape mount-ed abrasive points by lightly touching arotating point to the diamond surface. It isalso handy for hand smoothing and shap-ing glass, metal, stone, bone and plastic as well as touching up chisels and steel instru-ments. The 3/4" x 2" diamond is mounted on a 6" plastic handle.

Handy sharpener for people on the go! Carbide side quicklysets the edge and the Ceramic side does a nice job finishingthe edge. Quick, easy, and a must have for all knife owners.

2 Step Knife Sharpener

WORK SHARPWOOD TOOL SHARPENER#PT03000............................$199.95LEATHER HONE KIT#PT02001..............................$29.95ABRASIVE KIT SLOTTED#PT02002..............................$14.95ABRASIVE KIT COARSE#PT02005..............................$14.95TEMPERED GLASS WHEEL KIT#PT02023..............................$19.95SLOTTED WHEEL KIT#PT02029..............................$19.95ABRASIVE KIT FINE#PT02043..............................$14.95ABRASIVE KIT HONING#PT02044..............................$14.95WIDE BLADE ATTACHMENT#PT02020..............................$79.95

2 STEP KNIFE SHARPENER #SA00011 ......$4.95

The best stropping compound we have! Try thiscompound before you decide to stone sharpenyour knives. It will save you a lot of time.

Yellowstone Honing Compound

YELLOWSTONE HONING COMPOUND#HRBD1 ........................................$9.95

Diamond Hone

DIAMOND HONE FINE 600G #FO10343 ................................$9.95DIAMOND HONE MEDIUM 400G #FO10344 ................................$9.95

The sharpening process starts withordinary sandpaper. After the sandpa-per stage is completed, it’s time for theleather belts or sleeve. The first step isto apply a little honing compound to theleather. Apply the compound while theleather is not under power-this will helpconserve the compound. Once the cut-ting edge is applied to the leather belt or sleeve, thetool will be done in minutes. To achieve a high polishon your tool, try the linen belts.

Surgi-Sharp Belts & SleevesPower Honing Made Simple

Leather Belt 1"x30" #WP30000 ..............$16.95Leather Belt 1"x42" #WP42000 ..............$19.95Yellowstone Honing Compound#HRBD1 ....................................................$9.952" x 11/2" Quick Lock Sanding Drum #CL32245 ..................................................$4.95 Surgi-Sharp Sleeve

The Work Sharp 2000 is a dry sharpening andgrinding system the uses double sided150mm Edge-Vision Wheels with multiple gritadhesive backed abrasives to provide a opti-mal grinding and sharpening surface. WorkSharp offers 3 easy ways to grind and sharpen:Freehand on top, the chisel and plane iron portand the Edge Vision port. Work Sharp’s preciseand repeatable chisel sharpening port allowseasy sharpening of 25 degree angle chiselsand plane irons up to 1 5/8” wide. The dia-mond lapping abrasive in the sharpening portincreases burr removal, speeds sharpening andallows for one step re-sharpening. The Edge Visionport allows you to see the cutting edge as you sharpenor grind a wide array of carving, lathe and other specialtytools. The Work Sharp’s versatile design allows for a wide array of grinding and sharpen-ing tasks and is easier and safer than a bench grinder.

WORK SHARP 2000Contains Tool Sharpener, EdgeVision Sharpening Wheel, 8 PieceAbrasive Wheel, Tool Rest & User’sGuide#PT20000 ..............................$99.95 WS2000 KNIFE SHARPENINGBELT ACCES KIT#PT20080 ..............................$19.95

WS2000 KNIFE SHARPENINGATTACHMENT#PT20090 ..............................$34.95WORK SHARP WS2000 EDGEVISION WHEEL#PT02024 ..............................$24.95WORK SHARP WS2000 ABRASIVEKIT #PT02174 ....................$19.95

Worksharp 2000

Free Knife Sharpening System with purchase of Worksharp 2000via mail in rebate 10-01-09 through12-31-09

60


SHARPENINGIndia Sharpening Stones

INDIA SHARPENING STONES8" X 3" FINE #NR54460 ............$16.958" X 3" MEDIUM #NR54461 ......$16.958" X 3" COARSE #NR54462 ....$16.95

BUY ALL THREE AND SAVE!#NR54463....................................$42.95SHARPENING OIL #NR87760......................................$5.95

India stones can’t be beat fortheir versatility. They are smoothcutting and leave a long-lastingedge. These are the best choicefor all -around sharpening. Theyare ideal for the wood worker,carpenter or mechanic. Eachstone comes with a plastic stor-age case with non-skid feet.

Producing razor sharp tools and finely finished bevels hasmoved from an art form to a science. Any grinding job,skews, scrapers or gouges are all easy prey for this jig. TheWolverine will speed up your grinding, give you sharpertools and prolong the life of both tools and grinding stones.The Wolverine turns most inexpensive 6", 7" or 8" grindersinto excellent sharpening machines. Includes platformshown below.

The Delta 8" Variable speed grinder is idealfor most shop applications. With 2 speeds,1725 and 3450 rpms, the grinder can doboth fine sharpening and aggressive grind-ing.The 2 included stones are 36 and 60 gritand finer stones are available. A Tool-Lessquick change system allows you to changestones quickly. At 48 lbs, this grinder isheavy enough to stay stable while in use,but can easily be lifted and stored. Its baseis also drilled so it can be bolted to a surface.Also included is a diamond wheel dresserand flexible work light.DELTA 8" VARIABLE SPEED

GRINDER #DT45000 ............$169.95SHIPPING CHARGE................$25.00DIAMOND WHEEL DRESSING TOOL#PA24022 ................................$12.95FINE 8" X 1" WHEEL#NR88282 ................................$24.95

EXTRA FINE 8" X 1" WHEEL#NR88283 ................................$24.95FINE 6" X 1" X 1" WHEEL#NR88262 ................................$18.95X-FINE 6" X 1" X 1" WHEEL#NR88263 ................................$18.95

WOLVERINE GRINDING JIG #ON2291......$87.95

8" Variable Speed Grinder

The Wolverine Vari-Grind will properly shape and maintain theedge on standard bowl gouges, the modern side grind shapeand the traditional fingernail shape.

WOLVERINE VARI-GRIND ATTACHMENTA. Tools up to 5/8" dia. #ON2480 ..........$52.95B. Tools 1/2" to 11/8" dia. #ON3074 ........$52.95

The Wolverine Skew Grinding Attachment will enableyou to quickly and accurately grind your skew. By keep-ing the skew at the proper angle, the edge will not getrounded over which is the main problem when sharpen-ing a skew. The sharp, uniform edge produced willleave an incredible finish.

WOLVERINE SKEW GRINDING ATTACHMENT#ON2690 ............................................$32.95DRESSING ATTACHMENT#ON2292 ............................................$65.95

Wolverine System

Powerstrop - Easy Edge Maintenance

Maintain the edges of your carving toolsand woodturning tools with this greatleather stropping wheel. Simply mount it inyour drill and you’re ready to go. Nothingcan put an edge on your cutting tools betterthan a leather strop and this one will bring itto razor sharpness. The deluxe kit includestwo stropping wheels - one is 3/4” wide andthe other is V shaped for sharpening of

gouges, V gouges and veining tools. Alsoincluded is a mandrel for each wheel and ablock of polishing compound.For best results, we recommend the usethe “Yellowstone” compound listed below. Itwill give your tools the “Magic Edge”.

STANDARD POWER STROP KITIncludes:3.5" X .75" Leather HoningWheel, Honing Compound, .25" ShankMandrel #PWS10 ..................$19.95Yellowstone #HRBD1 ............$9.95DELUXE POWER STROP KITIncludes: 3.5" X .75" Leather HoningWheel, 3.5" X .25" V Shaped HoningWheel,Honing Compound, 2 .25" ShankMandrels #PWS20 ................$32.95

A.

B.

C.D.

E.

F.

G.H.

A. INDIA 3/8" HALF ROUND FINE4" X 3/8" #NR86380 ............$9.95B. INDIA 3/8" HALF ROUND MED.4" X 3/8" #NR86385 ............$9.95C. INDIA TAPERED SLIP FINE 4" X 1/2" X 1/4"#NR86650 ..$12.95 D. INDIA TAPERED SLIP MED.4" X 1/2" X 1/4"#NR86655 ..$12.95 E. INDIA ROUND EDGE SLIP FINE- 4" X 1" X 7/16" X 3/16" #NR87135 ..............................$9.95

F. INDIA ROUND EDGE SLIP MED.- 4" X 1" X 7/16" X 3/16" #NR87140 ..............................$9.95G. INDIA CARVING TOOL SLIP QMED. - 21/4" X 7/8" X 3/16" #NR87220 ..............................$9.95H. INDIA CARVING TOOL SLIP SMED. - 21/4" X 7/8" X 3/16"#NR87230 ..............................$9.95

With this Wolverine system, or Flat Tool accessory if you already own the WolverineSystem, you’ll be able to use your 6" or 8" bench grinder to sharpen chisels andplane irons up to 2.5".

ACCESSORIES FOR THEWOLVERINE JIG (1) Arm Support,(1) Honing Jig #ON3601 ....$87.95

COMPLETE SYSTEM (1) Base,(1) Support Arm, (1) Honing Jig#ON3572 ..........................$109.95

The new Sharp Fast Tool GuideSharpening System is the easiestway to accurately and safely sharp-en bowl and spindle gouges.Where some other systems counton the users coordination and focuswhile free hand sharpening the tool,The Sharp Fast has a pivoting toolholder that securely holds the tooland effortlessly keeps it on thewheel surface and won’t let it slip offeither side. Being fully adjustable,virtually any profile can be pro-duced on any gouge ranging from1/4" to 3/4" and a built in depth con-trol will keep you from grinding off tomuch material. The basic SharpFast guide is immediately adaptableto other holding bases without mod-ification. Other jigs available. Madein the USA.

SHARP FAST SYSTEM COMPLETE/S900-C #CA90000 ......................$109.95SHARP FAST BASIC GUIDE /S900#CA90001 ........................................$84.95SHARP FAST TOOL HOLDER /S900#CA90100 ........................................$60.95SHARP FAST HOLDING BASE /S900#CA90300 ........................................$31.95

This affordable 2 stage honing guide opensfrom 1/8" to 23/4". Knurled and slotted snugsup to your plane irons or chisels while glidingsmoothly across stone or abrasive materials.

HONING GUIDE #BH19117 ......$14.95

Honing Guide

Sharp Fast System

61

SHARPENING


Norton waterstones are a cut above the entrymodel stones. These stones are softer, andwhen lubricated with water, quickly build up asuper fast cutting slurry. The grit sequence cre-ates an efficient cutting schedule that keeps youfrom wasting time by sharpening with either tofine or to coarse of a grit.Waterstones work fasterand produce a keener edge than regular stones.

WATERSTONE 8" X 3"1000 GRIT #NR89506......$44.954000 GRIT #NR89507......$59.958000 GRIT - New Lower Price#NR89508 ........................$74.95SET OF 3 #NR89509 ..$169.95COMBINATION STONES220/1000 GRIT#NR24335 ........................$42.954000/8000 GRIT#NR34336 ..........................$79.95

NortonWaterstones

The new Tormek T-7 reflects 30 years orTormek evolution. Improved motor isolation,all stainless steel grindstone hardware, animproved horizontal base, animproved powder coat finishand an improved UniversalSupport with micro adjust,calibrated thumbwheel andquick lock are just some ofthe features you’ll find onthe new sharpening sys-tem. The key word whensharpening the Tormekway is repeatability. Sincethe tools are guided in jigs,you are only removing a minuteportion of the steel at eachsharpening. Not only does thesystem put the best possibleedge on the tool, but alsoincreases its useful life. The per-fect edge can even be put on complicatedshapes like various gouges and skews withradiused edges. Once you have your shapecreated, you can sharpen in under a minute.The water cooled, slow speed grindstone willnot only put the perfect edge on your tool, butwill do it without overheating the steel andcausing it to lose its hardness. It also pre-vents grinding dust in the air and deposits allsteel particles in the water trough. The final

TORMEK Super Grind SystemThe Ultimate in Sharpening Systems

step in the process is on the leather hon-ing wheel, which lets you polish the edgeto razor sharpness. Since 1973, Tormekhas introduced many new techniquesand set the standard in water cooledsharpening. Buying a Tormek is a safeinvestment in quality and performance.You are assured that all future develop-ments will fit your machine.

TORMEK ACCESSORIES: Honing Compound #TM00070 ......$7.95Planer/Jointer Blade Jig#TM50000 ..................................$164.95Profile Jig #TM00080 ................$149.99Stone Grader #TM40000............$24.95Universal Support with Micro Adjustment#TM10555 ....................................$37.95Diamond Truing Tool #TM30001..$75.95Axe Jig #TM60000........................$15.95Knife Jig #TM22220......................$32.95Long Knife Jig 140MM#TM14000 ....................................$47.95Scissors Jig #TM90000................$44.95Short Tool Jig #TM32000 ............$23.95Gouge & Turning Jig#TM18500 ....................................$82.95Skew/Roughing Gouge /Multi-Jig

#TM50505 ....................................$58.95Turning Tool Rest #TM70000 ......$31.95Profiled Honing Wheel#TM11111 ....................................$54.95Machine Cover #TM38000 ..........$22.95Turning Tool Setter #TM00100 ....$28.95

HANDTOOL KIT: Includes Knife Jig,Long Knife Jig, Scissors Jig, Short ToolJig and Axe Jig#TM70500 ..................................$157.95

WOODTURNER’S KIT: Includes GougeJig, Multi Jig, Turning Tool Setter, ToolRest, Profiled Leather Honing Wheel,Machine cover, and Woodturner’sInstruction Box#TM70800 ..................................$289.95

ProEdgeSharpeningSystemProEdge is a revolutionary sharpen-ing system introduced by RobertSorby. In fact, the concept is far fromnew as the ProEdge largely repli-cates the tool sharpening systemwhich has evolved in the RobertSorby factory over many, manyyears. This compact system is nowavailable to woodworkers whetheroperating in a large workshop orsmall shed. Central to the ProEdgeis an abrasive belt which is a quickand efficient method of putting akeen edge on each and every tool.The cool running belt avoids any over-heating.The system comes with an anglesetter which allows the user to accuratelylocate most of the common sharpeningangles required by woodworkers.However, the user can easily set his ownangle if he wishes to move away from anyof these common pre-set angles - 15, 20,25, 30, 35, 45, 60, 80 and 90 degrees.The ProEdge is ideal for those who need

to sharpen carving tools, bench chisels,framing chisels, turning tools, plane irons,router bits, garden tools and much more.The ProEdge Plus includes a number offurther accessories of especial value tothe woodturner - a skew chisel jig, a fin-gernail gouge profiler and a standardgouge jig. Proudly made in SheffieldEngland * See Robert Sorby TurningTools Page 54

PROEDGE SHARPENINGSYSTEM #SZ00095................$529.95SHIPPING CHARGE ............$25.00SORBY PIGTAIL#SZ00110 ..................................$29.95

SORBY BUFFING MOP#SZ00111 ..................................$26.95SORBY HONING POLISH#SZ00112 ..................................$14.95SORBY TIP HOLDER#SZ00113 ..................................$14.95

PROEDGE SHARPENING BELTCOMBO: one of each grit - All AluminumOxide material. Kit includes 1 each - 60, 80,120, 220, 400 grit belt #SB21300 ..................................$14.9560 COARSE #SB21306 ............$3.9580 MEDIUM #SB21307 ..............$3.95120 MED/FINE #SB21309..........$3.95220 FINE #SB21310 ..................$4.25400 EX FINE #SB21311 ............$4.25

KLINGSPOR FAMOUSGOLD ALUMINUM OXIDE220G GOLD #SB21312 ..............$4.25320G GOLD #SB21313 ..............$4.25400G GOLD #SB21314 ..............$4.25

KLINGSPOR'S BEST CERAMICALUMINUM OXIDE:60G CERAMIC #SB21304..........$4.9580G CERAMIC #SB21305..........$4.95

TORMEK BLACK-STONE SILICONThe Tormek Blackstonedelivers fast steel removal on HSS, exoticalloys and tools with large bevel areas.#TM25001 ..........................$179.99

TORMEK JAPANESEWATERSTONEThe Japanese wheel leaves an ultra finesurface finish on hand tools where minimalsteel removal is needed.#TM25002 ..........................$219.99

TORMEK T-7 GRINDERconsist of: square edge jig, truing & dressing tool,stone grader, angle master, honing compound,handbook and DVD.#TM77777 ..........................$589.95

TORMEK T-3 GRINDERdurable ABS plastic housing, a 120 wattmotor, 8" x 1.5" stone. All current Tormekjigs can be used on the T-3, includes squareedge jig, anglemaster, honing compound,hand book and DVD #TM33333 ..........................$339.95

Go to www.woodworkingshop.com for additional Tormek information and videos

62


SHARPENING

KLINGSPOR’s self-adhering silicon carbide paper rollscan be used for a number of different applications.Two ofthose are rubbing finishes and sharpening. When finish-ing with Danish Oil for instance, this wet/dry paper cannot only be used between each coat, but can be used torub in the oil itself.Working progressively through the gritrange, you will achieve the smoothest and deepest look-ing oil finish possible. For sharpening, stick the abrasiveto a flat surface, like glass, and simply treat it like a sharp-ening stone. It’s amazing how this will not only sharpen,but polish your chisels and plane irons.

Abrasive Rolls for Finishing and Sharpening

320 Grit 220 Grit 120 Grit 80 GritITEM# AR23320 AR23220 AR23120 AR230806" x 5m $12.95 12.95 12.95 12.95

HEAVYWEIGHT ALUMINUM OXIDE PSA PAPER ROLLS

SILICON CARBIDE WET/DRY2000 1500 1200 1000 800 600 400 320 280 240Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit

ITEM# AR11290 AR11280 AR11270 AR11260 AR11250 AR11240 AR11230 AR11220 AR11210 AR112006" x 5m $9.95 9.95 9.95 9.95 9.95 9.95 9.95 9.95 9.95 9.95

Precision Diamond SharpeningSystem Sharpen Plane Irons and Chisels with Ease

Now you can use the most fool-proof method of sharpening planeirons and chisels ever. No set-uptime is required to achieve perfectflat ground surfaces every time.Using the two diamond stones (pri-mary, and finishing) that are guar-anteed for 2 years, you’ll realizewhy this is called the biggest inno-vation in hand sharpening in years.There are 25 degree and 30degree fixed sharpening angles forprimary and secondary edges withthe ability to create micro second-ary angles for the ultimate fineedge. Simply place the tool to besharpened on the PSS, hold it stilland slide the top side to side and

let the diamond do the work. It’sthat safe, simple, and quick to keepyour tools in top cutting form.Forget your fiddly old guides andjigs and get the Precision DiamondSharpening System today!

PRECISION DIAMONDSHARPENING SYSTEM#MR00008 ..................$74.95DMT EXTRA COARSEREPLACEMENT STONE#MR00009 ..................$12.95DMT FINE FINISHINGREPLACEMENT STONE#MR00010 ..................$12.95DMT SUPER FINEREPLACEMENT STONE#MR00011 ..................$12.95DMT PREPARATIONSTONE #MR00012 ....$12.95DMT FINISHING STONE#MR00013 ..................$12.95

This 3 pc DiamondHone Block Set isthe perfect sharp-ening accessory tohave around theshop. The kit con-tains a coarse,medium and finediamond block.Each block has a 3layer diamond thatis nickel bonded to a flat alloy frame. They are ideal for sharpeninghigh speed and carbide steels. You can accomplish all aspects ofsharpening from cleaning up nicked edges to honing the tool edge toa razor finish. Sharpen chisels, router bits, knives and plane irons.

2" x 6" Diamond Hone Block

2" X 6" DIAMOND HONE BLOCK SET 3PC#GT46632 ..................................$12.95

SHOP STROP#SS11111............................................................$29.95SHOP STROP COMBO Includes two each of 150, 320, & 600grit KLINGSPOR PSA replacement discs #AD99060 ....$3.95

Shop Strop uses the same sharp-ening principle of honing with pro-gressively finer grits of abrasivesimilar to a barber stropping arazor. Because the edge is heldlevel, sharpening can be closelyobserved and controlled. Thewider surface area accommodateslarger blades than the normal, nar-row grinding wheel edges. Thecomplete sharpening systemincludes hex arbor disc withleather disc, stropping compound,aluminum disc, and two 4"KLINGSPOR PSA discs each in150, 320, and 600 grits. Makes adrill press a sharpening center.

Shop Strop Turn Your Drill PressInto a Sharpening Center

Sharpening System The Veritas Honing Guide has been redesigned,increasing its range, capacity and accuracy. The maindifference in the MK11 is its blade registration systemthat squares the blade and sets the bevel in one easystep. The guide has 3 gross bevel angle configurations,25˚ to 54˚, 15˚ to 40˚ and a third for back bevels. Eachone has incremental adjustments within each range toenable you to perfectly hone in on the desired angle.The Veritas MK11 can easily accommodate chisels asnarrow as 1/4" and blades as wide as 27/8" and up to1/2" thick.

SHARPENING SYSTEM (Stone not included)#VT05091....................................$59.95

The 400 grit Diamond Sharpening Cone isthe perfect tool for touching up router bits,shaper cutters and carving or turning tools.They work equally as well on serrated cutleryand fish hooks. No tool or tackle box shouldbe without a Diamond Sharpening Hone.

Diamond Honing Cone

DIAMOND HONING CONE#WK24730............................$7.95

Our 2 hone strops are unique because of the special rubberlike material used on the strop. This material eliminates theinconsistencies of leather and will greatly outlast leatherstrops. The strop surface can be renewed periodically witha little detergent and water. Each strop is bound to a wood-en handle and has a round edge for honing the inside ofgouges and a 45 degree edge for the inside of V tools.

HONE-STROPLARGE #MW41000......................$19.95SMALL #MW40000......................$14.95

2" X 12" LEATHER STROP (for leather only)#CA10000................................................$9.95

Hone-Strop Hones a Variety of Shaped Blades

The Flexcut Slip Strop is an economical way of maintain-ing the razor edge on carving tools. It has been speciallymolded to allow for polishing and deburring the hard toreach areas on the inside of V tools and gouges as wellas the outside edge bevels. Either side of the strop canbe used. Each Slip Strop comes with a mini-bar ofFlexgold polishing compound and detailed instructions.

FLEXCUT SLIP STROP #PW12 ....................................................................................$12.95

Flexcut Slip Strop

simply remove unwanted stock when-ever and wherever needed. Don’t limityour uses to just woodworking andyou’ll see many other home uses forthis kit - grind weld seams, sheetmetal, even lawn mower blades.

41/2" Coarse Discs (25 Pk.)#CD48363 ............$13.95Buy 2 or more & pay $10.00 each7" Coarse Discs (25 Pk.)#CD48365 ............$16.95Buy 2 or more & pay $13.00 each

41/2" x 7/8" (25pk. & Pad)#CD13005............$19.957" x 7/8" (25pk. & Pad)#CD13006............$24.95

BACKING PADS FOR COARSEAND FIBRE DISCS41/2" Coarse Disc Backing Pad#BP48369 ........................$8.95

5" Coarse Disc Backing Pad#BP48371 ........................$9.957" Coarse Disc Backing Pad#BP48370 ......................$12.95

4.5" Fibre Disc 25 Pack#FD99945 ..................$19.955" Fibre Disc 25 Pack#FD99950 ..................$24.957" Fibre Disc 25 Pack#FD99970 ..................$29.95

Many new tools for stock removal and fin-ishing are made specifically for anglegrinders. Here you’ll find 25 coarse discsalong with a backing pad so that you cansafely mount these discs and use them onyour angle grinder. Make the initial con-tours for a windsor chair seat, carve outthe beginning shape of a carved piece or

“Hog Off Material Quickly YetWith Complete Control.”

Coarse Discs - Start Your Carving Off Right

Super Zirconium Fibre Disc Kit

BESTBUY!

Kit includes 5 pack each of 24, 36, 50, 60 and 80 grit Alumina Zirconia top qualityfibre discs. Fibre discs are also available in 5 packs. Call or check online atwww.woodworkingshop.com

A unique feature about all Lancelot chains isthat they are a full house design which sim-ply means the chain circlet consists ofconsecutive left and right teeth - theteeth are not separated by skip linkscommon to standard chain saw.All ourblades have twice the amount of regu-lar teeth resulting in the blade poweringits way through the hardest of woods andother soft non ferrous materials. This impor-tant feature, combined with the speed of theangle grinder rotating at between 10,000 to13,000 rpm's provides users with the most effi-cient and powerful cutting and shaping powertool accessory in the world. Lancelot andSquire are versatile blades which will cut in anydirection. Do NOT use Lancelot or Squire onany Makita brand grinders. We only recom-mend use of 4-1/2" (115mm) angle grinderswith a constant pressure switch (paddle, kill ordead man switch).

Klingspor’s Woodworking Shop was the first to offer flap discs as acarving and shaping tool. Since then, we’re seeing them everywhere.Bottom line is that they really do work. We’ve come up with a twist onthis type of item – the quick change flap disc. Simply affix the backingplate to your angle grinder and keep it there. Then simply twist on theflap discs as you need them. Change grits quickly – it’s ideal for multi-ple uses for shaping of parts. Plus you’ll find plenty of uses around thehome for these as well. They work great on metal, plastics, wood, etc.

Flap discs are an exclusive of Klingspor’sWoodworking Shop. They fit on any 41/2" or 5"angle grinder and will do the work that the “chain-saw” type carving and shaping tools do but withoutthe danger involved.There are two types available; theSMT 626 model and the SMT 628 model.The 628 is a com-pletely flat disc that should be used mostly on flat surfaces for simpleshaping like making the dips in the seat of a rocking chair. The 626 model has slightlyupturned edges so that working on rounded or concave surfaces is possible.

SMT 626

SMT 628

120 Grit 80 Grit 50 Grit 36 GritITEM# MD98061 MD98058 MD98050 MD9804441/2" x 7/8" $6.99 6.99 6.99 6.99

120 Grit 80 Grit 50 Grit 36 GritITEM# MD27973 MD27661 MD27972 MD2754841/2" x 7/8" $6.99 6.99 6.99 6.99

Flap Discs Shape Your Work

Quick Change Flap Discs

CMT 726*

CMT 728*

120 Grit 80 Grit 60 Grit 40 GritITEM# QF40613 QF40612 QF40611 QF4061041/2" $4.95 4.95 4.95 4.95

120 Grit 80 Grit 60 Grit 40 GritITEM# QF40623 QF40622 QF40621 QF4062041/2" $4.95 4.95 4.95 4.95

41/2" BACKING PLATEFOR FLAP DISCS#QF40000 ................................$5.25

FLAP DISC KIT - one of each grit andbacking plate SAVE $15.00 #QF49999 ..............................$29.95

LANCELOT 5/8" 14 TOOTH#KX45814 ..........................$44.9514 TOOTH REPLACEMENTCHAIN #KX40014..............$22.95LANCELOT 5/8" 22 TOOTH#KX45822 ..........................$44.9522 TOOTH REPLACEMENTCHAIN #KX40022..............$22.95

* Must be used with #QF4000 Backing Plate

Merlin is a light and compact tool set that consistof a high quality, German made Proxxon longneck angle grinder and five different accessories.With it’s electronic variable speed range of3,300 to 13,000 rpms, notonly is the Proxxon grinderan incredible tool, but thevariety of included acces-sories make this set idealfor start to finish detail onmost woodworking and carving projects. It isalso excellent for paint and rust removal, cuttingsmall components, sharpening tools, auto repairsand model and tool & die making. The kitincludes 5 incredible 2" accessories for wood,glass, metal and ceramics.

MERLIN MINIATURE POWERCARVING SET#KX10005......................$199.95

Merlin Miniature Power Carving Set

This unique wheel was developed to replace wire wheelsas a quick and easy way to remove paint, rust, and sur-face contaminants from metal. Perfect for usearound the house on yard equipment andtools, wrought iron rails, car parts, and manyother everyday items. Choose from either a4" size or a 6" size – both with a 1/2" arborhole. Easily chucks into any 1/4" tool.

Each wheel must be used with the reusable man-drel kit. The mandrel kit includes 2 each of washer sizes13/4" dia, 11/2" dia, and 1" dia to improve stability an usabil-ity of the wheel as it wears.

Rust & Paint Removal Wheel

POWER WHEEL MANDRELKIT (REUSABLE) 2.5" OALMANDREL#MD98082 ..............$5.95

POWER WHEEL 4"-1/2" ARBOR*#MD98080 ........$8.95POWER WHEEL 6"- 1/2" ARBOR*#MD98081 ......$13.95 *Items above must have Mandrel

POWER WHEELSTARTER KITincludes one each of 4" & 6"wheels and mandrel kitSAVE $5.00#MD98100 ......$23.85

Lancelot “For use on angle grinders with 5/8" spindles”

63

POWER GRINDING


64


POWER GRINDING / SAFETY

The new and improved AirPro Face shield is afully protected air circulating face shield that’sideal for all woodworking applications, evenmachining MDF material. Unlike the previousversion, the motor is now positioned away fromthe forehead area, reducing noise and vibration.There is now an attachment area for the option-al hearing protection. With new twin filters thatare 98% efficient, the AirPro has twice the filter-ing strength of the previous model. Not only isthe AirPro a much improved unit, it will runlonger due to its new 8 hour battery.

AIRPRO FACE SHIELD#TD40001..........................$329.95VISOR OVERLAY(10PK)/AIR/PRO#TD40003 ............................$29.95

EAR DEFENDERS(PR)/AIR/PRO#TD40004 ............................$44.95BATTERY CRADLE/AIR/PRO#TD40005 ............................$46.95

VISION-SAVER SAFETY GLASSES #AE13045..........................$3.95

Our Vision-Saver glasses offer excellent cover-age. The comfortable, lightweight design is per-fect for extended wear. Features include ANSIZ87.1 approved impact resistance, economicalpricing, brow guard, and adjustable temple.

Vision-Saver Safety Glasses

WIDE VIEW SAFETY GLASSES #AE13120..................$3.95

With a wide field of vision and integralside shields, you’ll get excellent protectionfrom these glasses. The adjustable tem-ples offer the perfect fit while “pulling” theglasses close to the face. Featuresinclude ANSI Z87.1 approved impactresistance, economical pricing, browguard, and adjustable temple.

Wide View Safety Glasses

WRAP-AROUND SAFETY GLASSES #AE13132 ........$4.95

These top-notch wrap-around glassesoffer contemporary styling with out-standing performance. The close-to-the-face fit and extreme light weightmake these ideal for extended wear.Features include ANSI Z87.1 approvedimpact resistance, economical pricing,and wrap-around coverage.

Wrap-Around Safety Glasses

WIDE VIEW W/LED LIGHT SYSTEM #AE13155 ........$12.95

With a wide field of vision and integral sideshields, you’ll get excellent protection fromthese glasses PLUS the added benefit of twoextra-bright LED lights. These are excellent for usein dark work areas and in areas where extra detailmust be easily seen. Adjustable temples offer the per-fect fit. Features include ANSI Z87.1 approved impactresistance, bright LED lights with replaceable batteries,brow guard, and adjustable temple.

Wide View Safety Glasses withLED Light System

Airpro Face Shield

This unique motorized carverfrom Proxxon, is perfect for alltypes of wood carving, modelbuilding and wood artistry.You’llappreciate the 11,000 cuts perminute while accomplishingnumerous different carvingtasks. In addition, this great lit-tle tool will aid in renovatingand working on furniture, reconditioningantiques, line cutting, delicate paint removal,and working of plastics and plaster.The tool isexceptionally quiet and the chisel does notengage the motor until pressure is applied.Accepts Flexcut reciprocating chisels that areavailable in a variety of shapes and sizes.Comes with 3 blades – U, V, and flat.

PROXXON Power Carver

PROXXON POWER CARVER#PX38642 ................$134.95Power Carver Cutter Set / 5PK#PX28572 ..................$39.95Flexcut cutter Set / 4 PK#RG310......................$32.95

Tool Zone 41/2" Angle Grinder

TOOL ZONE 41/2" ANGLE GRINDER #TZ10000 ....................................$59.95

HEAD GEAR WITH FACE SHIELD#AE01055 ........................$14.95REPLACEMENT SHIELD#AE01060 ..........................$8.95

DISPOSABLE COVERALLLarge #AE96010 ..........................$8.95X-Large #AE96012 ..........................$8.95XX-Large #AE96014 ..........................$8.95

Headgear w/ Face Shield

Disposable Coverall

Convenient headgear with faceshield combination isan easy all-in-one way to protect the entire face and

front portion of the head when flying debris comesinto play – perfect for wood turners! The ratchet

adjustment offers the best possible fit. The polycar-bonate faceshield is simple to detach for quick

replacement when worn or scratched.

This coverall protects from harmful paint overspray, sandingdust, dirt, grease, grime, and pesticides. It’s made from

polypropylene non-woven material that’s lightweight and com-fortable. Elastic on wrists and ankles create an even barrier of

protection; plus, it’s washable so you can reuse.

• Paddle Switch with Lock-on — For better operator comfort and control• Vibration Control Handle — Reduces vibration up to 60%, providing uncompromising

comfort for extended periods of work• AC/DC capability — Extends the versatility of the tool by working from DC outlets such

as welders and generators• 5/8" -11 Spindle — wide flexibility for mounting most popular accessories• Tool-free adjustable guard — Quick guard installation and adjustments• Spindle Lock — For quick wheel changes

With these wide vision safety glasses, you’ll getexcellent coverage as well as the ability to wearthese over your prescription eyewear. Featuresinclude ANSI Z87.1 approved impact resistance,economical pricing, brow guard, and vented sides.

OVER THE GLASSES SAFETY GLASSES #AE13010 ..........................................................$3.95

Over-the-Glasses Safety Glasses

John fromColumbia, SC -

“Have used your products in thepast and they hold up better than

others that I have used."

65

SAFETY


Our most economical ear muff offers excellent protection of 26NRR. Its rugged, non-conductive plastic construction makesit best suited for your woodworking use and outdoor applica-tions as well. The soft foam ear cup cushions and con-toured, foam padded headband give a secure fit. Other fea-tures include: pivoting cup attachment for equal pressure distri-bution, easy slide cup adjustment, and internal acoustic foampad. 26 NRR

This ear muff offers exceptional protection across a wide range of haz-ardous noise situations and the durable high impact ABS cups make itperfect for all of your woodworking applications. The broad, super-softear cushions with high-density, slow-recovery foam create a low-pres-sure, secure seal that rests evenly on the entire ear. 26 NRR

In addition to comfortable, cushioned ear cups and a paddedadjustable headband, KLINGSPOR’s electronic ear muff featuresbuilt-in integrated circuits and scannable FM station searching. Withthis ear muff, you have the option of selecting either electronic noise-proofing or a radio function. So tune to your favorite FM channel andenjoy entertainment while protecting your hearing at the same time.Controls include on/off volume control, FM scanning, LED indicator,and resume and auto search functions. Includes two easy toreplace1.5 V batteries for instant use. 27 NRR

This maintenance-free respirator comes com-pletely assembled with organic vapor cartridgesand P95 particulate prefilters. This NIOSHapproved respirator offers state-of-the-art design,performance, and comfort. It features a soft, light-weight elastomeric facepiece, and cradle suspen-sion with easy-adjust headstraps that facilitate acomfortable and proper fit. The design providesa greater field of vision and allows workers to useglasses or goggles. The prefilters allow this sys-tem to be used with oil and/or solid particulates.Simply replace the particulate prefilters as need-ed to extend the life of the built-in cartridges.

These bullet-shaped earplugs make it easy to get aproper fit because they adjust to the shape and sizeof the ear canal. This disposable earplug is madeof slow-recovery non-irritating foam that providescomfort with low pressure on the ear canal.Available corded or uncorded. 200/box 27 NRR

Bullet EarplugsKEVLAR GLOVES - PAIR - LARGE#KV10000 ........................................$12.95

ECONOMY EAR MUFF#AE51301 ..........................................$9.95

HEPA dust protection (99.97% minimum filtering efficiencydown to 0.3 microns) provides for your safety when work-ing in particulate dust. Mouthpiece allows user to draw fil-tered air through the two large filters located behind theusers head. Great for those with beards. Compatible withface shields and other ear and eye protection.The Resp-O-Rator Jr. uses a single two sided particulate filter (over 97%filtering efficiency down to 0.3 microns) made for light dutyconditions.

These fine gloves offer the best of both worlds. TheKevlar fibers protect against accidental cuts fromcarving knives plus they offer superior grip of theobjects being carved. Not for use with moving orserrated blades.

Resp-O-Rator

Mouth Piece - 2PK#RP00008 ..............$4.95Replacement Filters - 2PK#RP00099..............$8.95

BLUE NITRILE DISPOSABLE GLOVES100PK LG #AE18002 ................$15.95100PK XL #AE18003 ..................$15.95

Kevlar Gloves

RESP-O-RATOR #RP00007 ........$49.95RESP-O-RATOR JR. #RP00006 ....$9.95

DUAL CARTRIDGE RESPIRATOR -MEDIUM #GH08211 ..............$19.95LARGE #GH08311................$19.95

REPLACEMENT PARTICULATEPREFILTERS (10 PK)#GH00095 ..................................$13.95

These nitrile material gloves will soon become yourfavorite gloves for a number of tasks around the shopand around the home. Nitrile gloves offer unique char-acteristics of abrasion and cut resistance (three timesmore puncture resistant), are more resistant to a vari-ety of harsh chemicals, are more form fitting, and area hypoallergenic alternative to latex rubber gloves.

Nitrile Gloves

EARPLUG - UNCORDED#AE50003 ..........$2.95/10 prs

EARPLUG - CORDED#AE50004 ..........$3.95/10 prs

This column-shaped earplug offers a more traditionshape and design. They still give a proper fit withnon-irritating foam that expands to fill the ear canal.Available corded or uncorded. 200/box 27 NRR

Column Earplugs

EARPLUG - UNCORDED#AE50005 ..........$2.95/10 prs

EARPLUG - CORDED#AE50006 ..........$3.95/10 prs

These particulate respirators are NIOSH approved.This means the filter medium has an efficiency of atleast 95% against airborne particulates 0.3 microns insize that are free of oils.The soft inner facepiece layer ofthese is non-irritating and comfortable to wear for longperiods of time.The shell doesn’t absorb as much mois-ture from exhaled breath as other masks. The respira-tors maintain low breathing resistance.

NIOSH Approved N95Particulate Respirators

N95 PARTICULATE RESPIATOR#AE82100 ............................$17.95/20/boxN95 PARTICULATE RESPIATOR W/VALVEValve helps to reduce heat and moisture build-up inside ofthe mask. Perfect for use anywhere but ideal in hot, humidareas. #AE88120..................$17.95/10/box

Economy Ear Muff

Top Quality Ear Muff

Electronic Ear Muff w/Radio

TOP QUALITY EAR MUFF#AE51312 ........................................$13.95

ELECTRONIC EAR MUFF W/RADIO #AE53002..............$39.95

One-Step Maintenance -Free Respirator

This is the best nuisance dust mask we offer. Heavy.75" straps that utilize both hook and loop andmechanical fastening devices along with anadjustable nose piece make this mask very effectiveand easy to adjust. The mask is completely handwashable and can last for years with proper care.

DUST BEE GONE MASKMEDIUM #DB10000 ........$34.95LARGE #DB11000 ........$34.95 XLARGE #DB12000 ........$34.95

Dust Bee Gone Nuisance Dust Mask

This is one of the most comfortable earplugs you’ll everfind, plus they’re reusable.The triple flange design allowsthis single-sized earplug to fit in all different size earcanals and to dampen as much noise as possible.

TRI-FLANGE EARPLUGS #AE30010 ............$2.49

Tri-Flange Earplugs Extremely Comfortable


DRUM SANDERS

66Supermax Drum Sanders set the standard for abrasive drum sanding years ago and are still the benchmark in theindustry. Unlike many of their competitors, Supermax Drum Sanders are still manufactured in The United States andcarry a 2 year warranty.

Supermax Drum Sanders are very versatile and will save you time while also giving you better results. Using a coars-er grit, your glued up panel can go straight from the clamp rack to the sander. Any panel you sand will come outperfectly dimensioned. Ultra thin stock can also be sanded since the drum can go all the way to the conveyor. Railand stile stock can be ganged and placed on edge to clean up any saw marks. If you typically work with highly figuredwoods, the Supermax will do what no planer can. It will sand and dimension the wood with absolutely no tear out orsnipe. This has always been a very popular machine for luthiers because of its ability on figured woods as well as itsaccuracy. Abrasive planing rough sawn stock is made much easier with ‘SandSmart”. SandSmart electrically moni-tors the load on the drum(s) and conveyor if necessary and will then resume the initial conveyor speed once loaddecreases.

The key benefit of the Supermax Drum Sander line is its ability to give you a perfectly dimensioned, flat piece ofstock that’s free from tear out and snipe. Whatever you may build, you will arrive with a better end product if youstart with perfectly machined stock.

SuperMax Tools

Conveyor Belts forPerformax, Jet andSupermax Sanders

SUPERMAX 25 1PH SINGLE DRUM #S733003 ..............................$3600.00*SUPERMAX 25X2 1PH#S613003 ..............................$4000.00*SUPERMAX 25X2 3P#S613103 ..............................$4000.00*SUPERMAX 37 1PH SINGLE DRUM #S736003 ..............................$5000.00* SUPERMAX 37X2 1PH#S637003 ..............................$5600.00*

SUPERMAX 37X2 3PH#S637103 ..............................$5600.00*SUPERMAX PRO 25#S625002 ..............................$2200.00*SUPERMAX 50X2 1PH#S650102 ..........................$11,500.00*SUPERMAX 50X2 3PH#S650302 ..........................$11,500.00**Call For Shipping

CONVEYOR BELT / 10-20#PM17020 ..................................$19.95 CONVEYOR BELT / 22-44 PLUS#PM17022 ..................................$89.95CONVEYOR BELT / 2244 & OLD 25#PM17076 ..................................$89.95CONVEYOR BELT / SUPERMAX 25#PM17086 ................................$112.95CONVEYOR BELT / SUPERMAX 37#PM17087 ................................$165.95CONVEYOR BELT / 16-32#PM26253 ..................................$45.95

Drum Size 58' # of Wraps 163' # of Wraps10"16"22"25"37"

137553

372115139

This is an excellent product for the drum sanders that require a 3” roll forwrapping. This is one of our premium aluminum oxide products with a poly-ester backing for super longevity and performance. Buy these in either 58 ftrolls or in greater bulk units of 50 meters (163 ft). *lengths are based on the listed

drum lengths with 5" diameter

BULK ROLL SIZE 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit 36 Grit

ITEM# DT00220 DT00180 DT00150 DT00120 DT00100 DT00080 DT00060 DT000362" x 45mt $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $63.95 $71.95Each roll enough for 12 wraps

3" 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit 50 Grit 36 Grit 24 Grit

ITEM# PE09366 PE09365 PE09364 PE09363 PE09362 PE09361 PE11448 PE09360 PE09359 PE09358 PE09357 PE0935658 FEET $34.95 34.95 34.95 34.95 34.95 34.95 34.95 34.95 37.95 39.95 43.95 49.95

ITEM# PE09369 PE09368 PE47862 PE63751 PE62619 PE60474 PE09379 PE54773 PE07953 PE30828 PE03016 PE27258163 FEET $84.95 84.95 84.95 84.95 84.95 84.95 84.95 84.95 109.95 115.95 126.95 145.95

4 PACK SIZE 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit 36 Grit

ITEM# DT31821 DT31820 DT31822 DT31819 DT31818 DT31817 DT31816 DT318152" PRE-CUT $24.95 $24.95 $24.95 $24.95 $24.95 $24.95 $29.95 $34.95

DRUM SANDER ROLLS FOR DELTA - CLOTH

ABRASIVE CLEANING STICKS8" x 2" x 2" #BS99801 ....$7.95

Alumina-Zirconia Rolls Tough Alumina-Zirconia grain that are resin bonded to a heavy weightcloth backing make for an abrasive that will outsand and outlast any other abrasive on the market. It also tends to run alittle cooler than typical abrasives, which makes it load less, making it ideal for tough drum sander applications. 3" wide.


ITEM# PE40210 PE40280 PE40260 PE40250 PE40240 PE40236 PE4022458 FEET $48.95 49.95 50.95 53.95 57.95 59.95 68.95


3" & 4" Rolls for Drum Sanders-Cloth

4" 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit


67


ROLLS

With a ton of uses, it made perfect sense for the Klingspor’s Woodworking Shop to add pre-glued rolls to the growing list of new products. Stickthis paper to any hand sanding block or power sheet sander and sand to your heart’s content. This is our heaviest paper backing, teamed up withpremium aluminum-oxide grains to give you the ultimate in life and consistency. The grains are applied in an open coat form that resists loading tooearly. So, cut these 41/2" rolls to any length you like and get The Most Sanding Power for Your Money!®

You won’t find a heavier paper for your oscillat-ing sheet sanders than this material from theKlingspor’s Woodworking Shop. Order aroll and cut your own sheets to fit most sheetsander models. Use with the Bosch, Porter-Cable, Ryobi or Dewalt 1/4 & 1/2 SheetSanders for best results.

SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# AR20271 AR20270 AR20268 AR20267 AR20266AR20265 AR20264 AR20263 AR202624 1/2"x 10Yds. $27.95 27.95 27.95 27.95 27.95 27.95 27.95 29.95 31.95

SIZE 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

ITEM# PR99386 PR98949 PR00047 PR98762 PR10255 PR993764 1/2"x 10Yds. $19.95 19.95 19.95 19.95 19.95 19.95 ITEM# PR08482 PR99636 PR32712 PR00924 PR99186 PR0103941/2" x 25 Yds $33.95 33.95 33.95 33.95 33.95 33.95

Heavyweight Paper PSA Rolls

Heavyweight Paper Rolls Heavier Paper Material Extends Oscillating Sheet Sander Use

Stearate PSA Rolls An addition to our PSA rolls, this stearate roll will offer you great performance and economy aswell.You’ll save money buying rolls and cutting the sheets for your PSA sheet sanders yourself.You’ll also come up with your own hand sand-ing devices for this useful sticky-backed material. This is our premium stearate material that consists of our top quality aluminum oxide grainsheld to a heavy C-weight paper backing with heat resistant resins and finally coated with our zinc stearate to reduce loading.

Stearate Paper RollsUse these rolls on your sheet sanders to get the best possible finish with no loading. Most of the popular sheet sanding tools offer a “clip in” method.Used with the clips, these plain stearate rolls are a real money saver. Because of the heavy weight backing and the stearate coating, you’ll get maxi-mum life and maximum performance.


ITEM# PR62955 PR50409 PR39004 PR39003 PR38409 PR34872 PR36165 PR35101 PR675824 1/2" x 10 Yds. $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95

READY-TO-WRAP Abrasives Strips (A KLINGSPOR Abrasive Product)They are ready to use right out of the box and you get a perfect fit every time!

36 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit 180 Grit 220 GritAluminum Oxide Cloth PE69036 PE69060 PE69080 PE69100 PE69120 PE69150 PE69180 PE69220PRICE $87.95 87.95 87.95 87.95 87.95 87.95 87.95 87.95

Alumina Zirconia PE68036 PE68080 PE68120PRICE $129.95 99.95 99.95

READY-TO-CUT Pre-marked Bulk Rolls (A KLINGSPOR Abrasive Product)

READY-TO-WRAP® ABRASIVESKlingspor’s Woodworking Shop is pleased to announce the availability of Ready-To-Wrap® Abrasive Strips for the entire Jet Drum Sanding Line. Ready-To-Wrap®

Abrasive Strips are properly cut to match your machine drum size. Packages con-tain 6 strips for 10" drums, 4 strips for 16" drums, 3 strips for 22" drums, 3 strips for25" drums or 2 strips for 37" drums. Jet uses quality KLINGSPOR Abrasives mate-rials for their Ready-To Wrap.

Surfacing rough lumber heavy stock removalSurfacing anddimensioningboardsLightSurfacingFinish sanding,minimal stockremovalFinish sanding, no stock removalFinal finishsanding

400 320 220 180 150 120 80 60 50 36 24

X X

XXX

X

XX

X

XX

FIN

EM

ED

IUM

10-20 16-32 22-44 25 X 2 37 X 2220 Grit PE61220 PE66220 PE62220 PE65220 PE67220

$29.95 29.95 29.95 29.95 29.95180 Grit PE61180 PE66180 PE62180 PE65180 PE67180

$29.95 29.95 29.95 29.95 29.95150 Grit PE61150 PE66150 PE62150 PE65150 PE67150

$29.95 29.95 29.95 29.95 29.95120 Grit PE61120 PE66120 PE62120 PE65120 PE67120

$29.95 29.95 29.95 29.95 29.95100 Grit PE61100 PE66100 PE62100 PE65100 PE67100

$29.95 29.95 29.95 29.95 29.9580 Grit PE61080 PE66080 PE62080 PE65080 PE67080

$29.95 29.95 29.95 29.95 29.9560 Grit PE61060 PE66060 PE62060 PE65060 PE67060

$29.95 29.95 29.95 29.95 29.9536 Grit PE61036 PE66036 PE62036 PE65036 PE67036

$29.95 29.95 29.95 29.95 29.95Combo PE61000* PE66000** PE62000***Pack $29.95 29.95 29.95

X-C

OA

RSE

*Includes: 2-36 Grit, 2-80 Grit & 2-120 Grit**Includes: 1-36 Grit, 2-80 Grit & 1-120 Grit

***Includes: 1-36 Grit, 1-80 Grit and 1-120 Grit

16" (Black)22" (Red)25" (Green)37" (Blue)

141096

1914128

READY-TO-CUT QUANTITIES

Drum Size36 Grit Abrasive

# of Wraps 60 Grit & Finer

# of Wraps

READY-TO-CUT® ABRASIVES - ClothThe READY-TO-CUT® is an upright box that allows the sandpaper to be reeledout of a hole on the bottom of the box like a dispenser. Each reel of abrasivesandpaper is marked and color coded;simply find the color line that correspondswith your drum size and cut along the line.

SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

ITEM# AR33040 AR33032 AR33022 AR33018 AR33015 AR33012 AR33010 AR330084 1/2" x 10 Yds. $17.95 $17.95 $17.95 $17.95 $17.95 $17.95 $17.95 $17.95


68

Many, many requests have led us to addingthis product to our catalog - rolls for populardrum sanders.There seems to be nowhereelse that these can be purchased and asusual, quality is the name of the game.Ourrolls are made of our heaviest paper-backedaluminum oxide material with the hook &loop already affixed to the backing.No mess-ing around with trying to do that

We, at Klingspor’s Woodworking Shop, are again one of the first to offer hook & loop sandpaper in roll form so that you can use it on any of yourtools and make convenience the name of the game. Cut just the length you need for use on all of your hook & loop compatible machines. Reusingpaper that’s not worn out when you take it off the machine saves you time and money. Also, we’re using our heavy paper roll material to make sureyou get extremely long life and the same finish from one piece to the next. So, your machines don’t take hook & loop? Order the Kling-On®

Conversion Kit and change over your power tools to a more convenient fastening system.


ITEM# KR20294 KR20293 KR20291 KR20290 KR20289 KR20288 KR20285 KR20282 KR202794 1/2" x 10 Yds. $34.95 34.95 34.95 34.95 34.95 34.95 34.95 35.95 37.95

Hook & Loop Rolls for Drum Sanders

6" x 25 Yds220 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit 40 GritKR38150 KR38148 KR34822 KR38146 KR38145 KR38143 KR38141$69.00 69.00 69.00 69.00 71.00 76.00 80.00

This has been a requested product for some time and Klingspor’s Woodworking Shop is able to offer our premium stearate materialin Kling-On® (hook & loop) roll form. Many of the newest sheet sanders accept hook & loop sandpaper and this roll will give you the bestprice per sheet ratio. Simply cut the material to size, stick it on the sander’s backing pad and you’re ready to go.

Stearate Kling-On® (Hook & Loop) Rolls

SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit

ITEM# KR48422 KR33320 KR33220 KR33180 KR33150 KR33120 KR33100 KR330804 1/2" x 10 Yds. $20.95 20.95 20.95 20.95 20.95 20.95 20.95 20.95ITEM# KR54767 KR54766 KR54765 KR54764 KR54762 KR54760 KR54758 KR547563" x 25 Yds. $32.95 32.95 32.95 32.95 32.95 32.95 32.95 32.95

Heavyweight Paper Kling-On® Rolls

This material is taking the woodworking market by stormwith its softness and smooth surface finishes.No other sand-paper on the market can match the “KLINGSPOR Gold” forsanding into severe profiles and for sanding turned partswhile on the lathe. Our customers have hounded us aboutselling this product in roll form-so here it is! The softness ofthese rolls has made them almost legendary in major furni-ture factories where they are used to sand even the mostdemanding contour.

KLINGSPOR GOLD Non-Loading EgyptianCloth Rolls A Woodturner’s Dream Paper

Gold Rolls10 YARDS 1" 2" 3" 6"400 Grit SR00787 SR00887 SR00917 SR84759

$7.95 14.95 21.95 39.95 320 Grit SR00786 SR00886 SR00916 SR84758

$7.95 14.95 21.95 39.95 220 Grit SR00785 SR00885 SR00915 SR84757

$7.95 14.95 21.95 39.95 180 Grit SR00784 SR00884 SR00914 SR84756

$7.95 14.95 21.95 39.95 150 Grit SR00783 SR00883 SR00913 SR84755

$7.95 14.95 21.95 39.95 120 Grit SR00782 SR00882 SR00912 SR84754

$7.95 14.95 21.95 39.95 100 Grit SR00781 SR00881 SR00911 SR19388

$7.95 14.95 21.95 39.95 80 Grit SR00780 SR00880 SR00910 SR84753

$7.95 14.95 21.95 39.95

yourself.These are a convenient length of twenty-five yards and are ready to put onto themachine.When it comes to offering the best possible products, you know where to go -Klingspor’s Woodworking Shop. Do yourself a favor and try KLINGSPOR’s industrial rollsmade specifically for Woodmaster® machines.

Wedge Tight1" Wide #WT55010 ..........$10.952" Wide #WT55020 ..........$12.95Both 1" & 2" #WT55000 ..........$19.95

Ideal for use with our shop roll or “gold”material

ROLLS

As a world leader in manufacturing industrial abrasives, KLINGSPORhas ample opportunity to reduce your sanding costs by making avail-able every possible piece of first quality, industrial sanding materialwhether we think it’s scrap or not.We found ourselves tossing out pre-

cious pounds of edge rolls that are taken from our automatedmachines when the “jumbo rolls” are cut into smaller, more con-

venient rolls. The “trim” is perfectly good, first quality narrowroll stock typically in widths from 1/2" wide to 4" wide.

These, we found, are perfect for lathe work, sandingspindles, chair legs and other turned parts. Haveyou ever thought that sandpaper could handle

your initial stock removal while your “turning chunk” is firstplaced on the lathe? We tried this and it saves your tools from exces-sive wear and will never bog down your lathe. For this cheap price,

isn’t it worth it! Also consider this deal if you find yourself constantlybuying rolls to complete odd jobs around the house from plumbing towindow glazing. As with our other bargain boxes, a more than gener-ous supply is included because the rolls are longer in length and vari-ety is a necessity to complete many different jobs. To you this meansnever running around the house looking for that special strip of sand-paper to either keep your lathe projects looking their best or tacklinga task in the bathroom, all at a price that saves you hundreds of dol-lars! Do yourself a favor, buy the Bargain Box of End Rolls today!Remember, save the environment, more sandpaper put to good useis less in landfills! Med./Fine (100 Grit & Finer) Only!

20LB BARGAIN BOX OF END ROLLS#BB00001 ................................................................$31.95

Bargain Box of End Rolls A WOODTURNERS MUST HAVE!!!


69

ROLLS / FOAM SANDING

FIN

EM

ED

IUM

600 Grit

400 Grit

320 Grit

220 Grit

180 Grit

150 Grit

120 Grit

100 Grit

80 Grit

1"SR81962

$4.95SR81687

$4.95SR81444

$4.95SR81171

$4.95SR81034

$4.95SR80904

$4.95SR80750

$4.95SR80637

$4.95SR80495

$5.95

1"SR47252

10.95

SR00870

10.95

SR00355

10.95

SR01071

10.95

SR00353

10.95

SR99801

10.95

SR99189

10.95

SR00351

10.95

SR80496

11.95

11/2"SR69568

6.95SR81713

6.95SR81473

6.95SR81178

6.95SR81048

6.95SR80910

6.95SR80762

6.95SR80647

6.95SR80505

7.95

11/2"SR45848

14.95

SR01037

14.95

SR99046

14.95

SR01072

14.95

SR99100

14.95

SR99698

14.95

SR99047

14.95

SR01035

14.95

SR01034

15.95

2"SR48674

8.95SR81725

8.95SR81494

8.95SR81188

8.95SR81059

8.95SR80917

8.95SR80770

8.95SR98957

8.95SR80514

9.95

2"SR78172

18.95

SR81721

18.95

SR01046

18.95

SR01073

18.95

SR99319

18.95

SR99885

18.95

SR98752

18.95

SR99213

18.95

SR99699

19.95

3"SR81985

12.95SR99585

12.95SR98760

12.95SR81192

12.95SR81077

12.95SR80936

12.95SR80791

12.95SR80671

12.95SR80533

13.95

3"SR99536

27.95

SR99190

27.95

SR01050

27.95

SR01074

27.95

SR80178

27.95

SR99735

27.95

SR99012

27.95

SR99580

27.95

SR99114

28.95

4"SR82003

17.95SR81754

17.95SR81529

17.95SR01078

17.95SR81092

17.95SR80942

17.95SR80804

17.95SR99450

17.95SR80547

18.95

4"SR71894

36.95

SR99697

36.95

SR98749

36.95

SR01075

36.95

SR98750

36.95

SR00352

36.95

SR99637

36.95

SR99695

36.95

SR00350

38.95

6"SR45242

25.95SR81763

25.95SR02958

25.95SR01079

25.95SR00709

25.95SR80961

25.95SR98787

25.95SR00710

25.95SR80573

27.95

6"SR78982

54.95

SR01061

54.95

SR01060

54.95

SR01076

54.95

SR01058

54.95

SR01057

54.95

SR01056

54.95

SR01055

54.95

SR00925

57.95

Shop Rolls A Multitude Of Uses Abound From The World’s Best Shop Roll Material Black = 10 yards Blue = 25 yards

EX

TRA

FIN

E

Whether you’re a turner, a carver orjust need to sand that certain littlespot, you’ll be raving if you try ShopRolls from Klingspor’sWoodworking Shop.This long last-ing, cloth-backed, aluminum oxidematerial from KLINGSPOR is spe-cially woven to be extremely flexibleyet get you through those situationswhen you must fold, crimp and twistyour sandpaper to the desiredshape—all without scratching andpossibly ruining your workpiece.Shop Rolls not recommended fordrum sanding.

When we introduced these Foam HandSanding Blocks and Pads a couple of yearsago, we had no idea what kind of impactthey would make. Home woodworkers, pro-fessionals and large furniture manufacturershave all found a large number of uses forthese items. Nothing is better for final sand-ing of simple contours and profiles - thisseems to be the consenses anyway. Nowwith the variety of kits and grits available, youcan’t go wrong.There will certainly be some-thing to fit that certain need in your shop.We’ll only offer the best product at the bestprice.While using these blocks and pads, remem-ber that if you keep them “clean” they will lastlonger. So, occasionally bang the block onyour hand or your workbench and knock thewood particles out. If you keep this up, you’ll

think these things never wear out. If it gets tothe point where you think the block isclogged beyond further use, head to the sinkand wash it out. It’ll be almost like new again!Obviously these are a must for every wood-working shop!The thin “pad” is best for more severe con-tours and smaller radius’. The foam is verysoft and forgiving making it perfect for mold-ing, narrow edges and small turned parts.Sized at 5" long by 4" wide and about 1/2"thick, this pad fits perfectly in your hand.Thethicker “block” works quite well on flat sur-faces where you might be concerned aboutgouging the workpiece, as well as concaveor convex surfaces and around most largercurved parts.This 4" long by 3" wide by 11/4"thick block offers great versatility andextraordinary life.

SANDING BLOCK - 4" x 3" x 11/4"3 Pk. (60 Grit) #FA00060 ..........$2.993 Pk. (80 Grit) #FA00080 ..........$2.993 Pk. (100 Grit) #FA00100 ..........$2.993 Pk. (120 Grit) #FA00120 ..........$2.993 Pk. (180 Grit) #FA00180 ..........$2.993 Pk. (220 Grit) #FA00220 ..........$2.996 PK. SAMPLER (60, 80, 100, 120, 180, 220 Grit)

New Lower Price #FA10000 ..........$6.50

Foam Hand Sanding Blocks & Pads... Rub OutSimple Contour & Profile Sanding Problems.

SANDING PADS - 5" x 4" x 1/2"3 Pk. (60 Grit) #FA06000.........$2.993 Pk.(80 Grit) #FA08000.........$2.993 Pk. (100 Grit) #FA01000.........$2.993 Pk. (120 Grit) #FA01200.........$2.993 Pk. (180 Grit) #FA01800.........$2.993 Pk. (220 Grit) #FA02200.........$2.996 PK. SAMPLER (60, 80, 100, 120, 180, 220 Grit)

New Lower Price #FA20000.........$6.50

ANGLED SPONGES10 Pack 120 Grit #FA04120.....$10.9510 Pack 180 Grit #FA04180.....$10.95

PRICE PER PACK

UltraFlex Sanding Pads are the premium foampads on the market. These incorporate a densefoam structure and a full, even coating of either

aluminum oxide or silicon carbide grains. Thismakes for an extremely long-lasting pad that

is very flexible for finish-sanding of con-toured parts and profiles. The pad meas-

ures 41/2" wide and 51/2" long.

So you like the way sandingsponges work on your woodprojects, but can't quiteget into those tightareas? With ourAngled Sponges, youcan take care of this lit-tle shortcoming. Oneedge of our standard block sponge hasnow been brought to a thin angle allowing you toslide it into tight spaces and accomplish your tough sand-ing tasks. These are meant for finishing only so we offertwo fine grits in these amazing sanding sponges.ITEM# FA03443 FA03442 FA03441 FA03440

A/O Ultra Flex Pads 10 $9.95 $9.95 $9.95 $9.95ITEM# FA03553 FA03552 FA03551 FA03550S/C Ultra Flex Pads 10 $9.95 $9.95 $9.95 $9.95

Foam

Top Coat of Resin

Grit

Base Coat ofResin

ORDER250&GETA PRICEBREAK!Ask our Customer

Service Departmentwhen ordering.

Pack 320 220 Grit 180 120Quantity Grit Grit Grit Grit

Angled Sponges

Our Longest Lasting, Most Flexible Sanding Pad

Ultraflex Sanding Pads

70


SLEEVE SANDING

41/2" Sanding Sleeves for Porter-Cable, Clayton, Delta & Ryobi Oscillating Spindle SandersSleeves Packaged & Priced Per Each

With the Robo Sander™, you have abuilt-in template guide to follow thatshape a sand it precisely. Basically, thisis the same idea as you’ve seen inrouter bits for years; a “pilot bearing”rolls along your workpiece that you’refollowing and won’t allow you to “over-sand”. It’s real advantage is that it willshape parts that are too thick to beshaped with a router and without thetearout and safety risks of a router.Production shops could make use ofthis tool as well. Three sizes are avail-able, 3" x 3", 2" x 2" and 1" x 2".

Robo Sander™

Ever Had a Curve or Particular Shape That YouWish You Could Copy?

ROBO SANDERS1" x 2" #RS10000 ..............$17.952" x 2" #RS20000 ..............$19.953" x 3" #RS30000 ..............$29.95Set of 3 #RS40000..............$59.95

1/2" x 41/2" 3/4"x 41/2" 1"x 41/2" 11/2" x 41/2" 2"x 41/2" 3"x 41/2"150 Grit SS20630 SS20609 SS20614 SS20615 SS20620 SS20621

$1.20 $1.31 $1.38 $1.48 $1.89 $2.10100 Grit SS20607 SS20610 SS20613 SS20616 SS20619 SS20622

$1.20 $1.31 $1.38 $1.48 $1.89 $2.10 60 Grit SS20606 SS20611 SS20612 SS20617 SS20618 SS20623

$1.20 $1.31 $1.38 $1.48 $1.89 $2.10

Buy the 18 Piece 41/2" Sanding Sleeve Kit & Save Money! 18 pc. Sanding Kit (1 of each size & grit) #SS10000......$23.95

MICROPLANE ROTARYSHAPER 2"#GP30041 ..........................$12.95

MICROPLANE ROTARY REPLACEBLADE 2"#GP30040 ............................$8.95

Delta’s bench top oscillating spindlesander features a large 18" diameter, castiron work surface. The machine is poweredby a .75 hp induction direct drive motor that7/8" spindle stroke 60 times per minute.With a dust collection system attached tothe 11/2" dust port, the sander becomes vir-tually dustless. Each of the differentdiameter drums comes with their owntable insert that keeps anything from slid-ing between the table and the spindle.**Includes spindle kit**

Delta B.O.S.S.

Designed for low speed power shap-ing without clouding the air with dust,Microplane® Rotary Shaper DrillAttachments have recently beenimproved based on your feedback!Each has been redesigned to includereplaceable blades with a newimproved tooth pattern to minimizeclogging. They work great on a drillpress!

Microplane Rotary Shaper

DELTA B.O.S.S. Standard EquipmentIncludes: 1/2" Spindle, Dust BagComplete 5 Piece Spindle Set#DT31780 ..........................$279.95Freight Charge......................$10.00

SANDING KIT Includes:1",1.5", 2",3" drums, metal plates, and abra-sives #DT31781 ..................$89.95

Buy the 27 Piece 6" Sanding Sleeve Kit & Save Money! 27 pc. Sanding Kit (1 of each size & grit) #SS60024...........$47.95

1/4"x 6" 3/8"x 6" 1/2"x 6" 5/8"x 6" 3/4"x 6" 1" x 6" 11/2" x 6" 2" x 6" 3" x 6"

150 Grit SS01830 SS01829 SS11544 SS01845 SS01847 SS01723 SS01732 SS36352 SS99150$1.79 $1.85 $1.95 $2.19 $2.24 $2.29 $2.39 $2.69 $2.99



6" Sanding Sleeves For Jet / Powermatic Spindle Sander


CLAYTON OSC SPINDLE SANDER/MODEL 75#HTC7500 ............................$199.95

The new model 75 oscillating spindlesander follows a long line of Clayton indus-trial sanders. Although compact in size, themodel 75 is built to give the woodworkinghobbyist years of lasting performance at agreat price. With a cast iron table measur-ing 111/2" x 141/2", the compact machine hasmore than enough table space for mostshop applications. A 1.2 HP motor turns the41/2" sanding drum at 2000 rpms and 58oscillations per minute, each oscillationhaving a 5/8" stroke.The model 75 accepts6 different size sleeves, a 1/2", 3/4", 1", 11/2",2" and 3".

Clayton OSC Spindle Sander

SLEEVE SANDING


71You’ll find hundreds of uses for these Sanding Sleeves from Klingspor’s

Woodworking Shop. Getting the desired smoothness on theedges of your workpiece or in a hole can sometimes be difficult.The same high quality material that goes into our premium belts is

used in the making of our Sanding Sleeves. Simply slide thesleeve over an expandable rubber drum with a 1/4" shank and

you’re ready to go. No gluing, no lapping, no worries.Packaged in quantities of 5 for your convenience.

Assortment includes one pack of each grit.

Dia x Length ITEM PRICE3/8" x 1/2" CL00608 $2.491/2" x 1/2" CL08085 $2.951/2" x 3/4" CL08125 $2.951/2" x 1" CL00816 $2.951/2" x 2" CL08325 $3.953/4" x 1/2" CL12085 $3.953/4" x 3/4" CL12125 $3.953/4" x 1" CL12165 $3.953/4" x 2" CL12325 $3.951" x 1" CL16165 $3.951" x 2" CL16325 $3.9511/2" x 1" CL11201 $3.9511/2" x 11/2" CL24245 $3.9511/2" x 2" CL24365 $4.952" x 1 1/2" CL32245 $4.952" x 2" CL32325 $5.952" x 3" CL32485 $8.952 1/4" x 3" CL36485 $14.952 1/2" x 3" CL25305 $15.953" x 3" CL48483 $16.95

Drum expands with just a twist.

Our Price Guarantee: We will Meet any NationallyAdvertised Price on any Equivalent Product in our Catalog.

Quick-Lock Sanding Drums

Mini Size Sanding Drum Kit

Klingspor’s Woodworking Shop does itagain—other companies try to get you tobuy those old- fashioned rubber sandingdrums that require you to use a wrench orspecial tool to tighten or loosen the abra-sive sanding sleeve. Don’t waste yourmoney! You can change grits or replaceworn sleeves quickly by simply grabbingthe knurled cylinder and giving a twist ofthe wrist. It’s that easy! With such a widevariety of sizes, you’re sure to find one (orseveral) that will tackle your sandingneeds. These work best when used withSanding Sleeves from Klingspor’sWoodworking Shop.Buy them each, or meet any applicationwith the variety in the convenient kits list-ed below. All drums have a 1/4" shank,except 3" x 3" which has a 3/8" shank.

Throw Out That Little Wrench

QLK-12 “Quick-Lock”Extra-Long SandingDrum Kit Contents: Drums: 1/2" x 2",3/4" x 2", 1" x 2", 11/2" x 2". SleevesIncluded: One fine (120 Grit) and onecoarse (50 Grit) for each drum size.QLK12 Set #CL00175 ......$16.95

QLK-15 “Quick-Lock”Sanding Drum Kit Contents:Drums: 1/2" x 1/2", 3/4" x 1", 1" x 1", 11/2" x11/2", 2" x 11/2". Sleeves Included: One fine(120 grit), and one coarse (50 grit) foreach drum size.QLK15 Set #CL00155 ......$18.95

FINE MEDIUM COARSE

SIZE DIA. X LENGTH X SHANK3/4" x 21/4" x 1/4" #SG00065........$8.951" x 3" x 1/4" #SG00055......$12.952" x 3" x 1/2" #SG00045......$13.8521/2" x 3" x 1/2" #SG00035......$14.953" x 3" x 1/2" #SG00025......$15.953" x 6" x 1/2" #SG00015......$19.95

Sleeveless DrumsA New Twist on an Old IdeaMake your own sanding system—justwrap, tuck and sand. These drums forsanding edges, curves and holes simplyuse your standard lightweight (A or Bweight only) sheets. Each drum is individ-ually balanced to give you smooth per-formance and excellent finishes.The coreis made of lightweight aluminum so itdoes not wear out but don’t worry aboutgouging the workpiece—each drum iscovered with a sponge rubber. Use thesein your drill press, lathe or hand-held drill(please keep in mind shank diameter).

This kit contains five popular miniature sizeddrums especially designed for work on small,intricate areas and parts. All drums have an1/8" shaft which allows them to be used inflexible shafts, drills and mini power tools likeForedom and Proxxon. Kit includes one each:3/8" x 1/2", 1/2" x 1/2", 1/2" x 3/4", 3/4" x 1/2",3/4" x 3/4" drums and one 50 grit and one 120grit sleeve for each drum listed.

SS01827$1.94

SS018311.94

SS018352.00

SS018322.05

SS018401.94

SS018442.00

SS018412.05

SS018492.18

SS018572.23

SS018582.61

SS018662.90

SS018342.90

SS018433.03

SS018513.27

SS018593.45

SS018673.47

SS018685.35

SS018735.35

SS018805.47

SS018906.35

SS01596$1.94

SS016021.94

SS016082.00

SS016032.05

SS016161.94

SS016212.00

SS016172.05

SS016242.18

SS016322.23

SS016332.61

SS016422.90

SS016062.90

SS016193.03

SS016263.27

SS016343.45

SS016433.47

SS016445.35

SS016495.35

SS016525.47

SS016576.35

SS01128$1.94

SS011331.94

SS011382.00

SS011342.05

SS011471.94

SS011492.00

SS011462.05

SS011572.18

SS011672.23

SS011682.61

SS011792.90

SS011362.90

SS011483.03

SS011593.27

SS011693.45

SS011813.47

SS011825.35

SS011925.35

SS012025.47

SS012146.35

SS00100$5.29

SS001015.29

SS001025.45

SS001035.62

SS001045.29

SS001055.45

SS001065.62

SS001075.94

SS001086.11

SS001097.10

SS001107.92

SS001117.92

SS001128.25

SS001138.91

SS001149.41

SS0011510.40

SS0011615.00

SS0011715.00

SS0011815.30

SS0011917.50

ASSORTMENT

MINI SIZE DRUM SANDING KIT#CL00020 ......................$8.95

Sanding Sleeves

9" Sanding Sleeves (Clayton, Jet)

Buy Set of 12for Only

$2895

(1 of each size & grit)

#SS90012

3/4" x 9" 1" x 9" 2" x 9" 3" x 9"

150 Grit SS32992 SS32999 SS32993 SS01892$2.49 $2.59 $2.98 $3.49

100 Grit SS01622 SS01629 SS01647 SS01659$2.49 $2.59 $2.98 $3.49

60 Grit SS01150 SS01160 SS01184 SS01217$2.49 $2.59 $2.98 $3.49

Dia. x LengthITEM#3/8" x 1/2" ITEM#1/2" x 1/2ITEM#1/2" x 3/4"ITEM#1/2" x 1"ITEM#3/4" x 1/2"ITEM#3/4" x 3/4"ITEM#3/4" x 1"ITEM#1" x 1"ITEM#11/2" x 1"ITEM#11/2" x 11/2"ITEM#2" x 11/2"ITEM#1/2" x 2"ITEM#3/4" x 2"ITEM#1" x 2"ITEM#11/2" x 2"ITEM#2" x 2"ITEM#2" x 3"ITEM#2 1/4" x 3"ITEM#2 1/2" x 3"ITEM#3" x 3"

Jeff from Elon, NC - "Very good products especially the sandpaper."


SANDERS

72

Dynabrade Air PoweredRandom Orbit Sanders

AccessoriesREPLACEMENT PADSoft 5" No Hole #DY56102 ......$19.95

Medium 5" No Hole #DY56106 ..$19.955x5 PSA #DY56100 ......$23.955x5 Kling-On® #DY54326 ......$26.95

• 6.5 amps with variable speeds from 3100to 6650 Random orbit and Eccentric orbit

Bosch 6" Dual ModeRandom Orbit Sander

BOSCH 6" DUAL MODE RANDOM ORBIT SANDER#BO1250DEVS ..............$234.956" EXTRA SOFT PAD#BO06601 ........................$18.95

6" SOFT PAD #BO06602 $18.956" HARD PAD #BO06603 $18.95HOSE & ADAPTER KIT#BO03353 ........................$24.95

Porter Cable has unveiled the lat-est innovation in sanding todaywith its Low profile 390 RandomOrbit Sander. The new sanderfeatures new patent pendingENDURATECH™ motor technol-ogy for improved productivity,durability and control. Rated at3.5 amps, the ENDURATECH™motor uses brushless technologythat reduces the number of wear-able components by 71%, givingthe motor 5 to 10 times longer lifewhen tested against traditionalpalm grip sander motors. Otherthan increased durability, the new390 features two more innova-tions that improve performance.They are electronic load controland electronic motor braking.Resembling many of the pneu-matic random orbit sanders, the390 is designed with a muchlower center of gravity allowingthe user to have his hand 31%closer to the work surface, anergonomic design that leads to

Porter Cable Low Profile RandomOrbit Sander

DYNABRADE PSA NON-VAC SANDER• Requires 15 cfm @ 90 PSI to operateat 12000 OPM’s5" #DY59020 ..............................Reg.$189.95ON SALE NOW - Save $50.00 - Pay $139.95

• 3.3 amps with variable speedsfrom 4000 to 12000 OPM’s3725 5" RANDOM ORBITSANDER#BO37250 ........................$134.953727 6" RANDOM ORBIT SANDER#BO37270 ........................$144.95

5" Accessories 5" Soft Backing Pads#BO20742 ....$16.955" Med. Backing Pad#BO20743 ........................................$16.955" Hard Backing Pad#BO20744 ........................................$16.95Vacuum Adapter #BO00006............$6.95Micro Filter #BO17259 ....................$14.95Crush Proof Hose & Adapter Kit*#BO03353 ........................................$24.95* Contains hose and hose to vac adapter. Does notcontain hose to tool adapter BO00006

6" Accessories 6" Extra Soft Backing Pads#BO06601 ........................................$18.956" Soft Backing Pad #BO06602......$18.956" Hard Backing Pad #BO06603 ....$18.95Vacuum Adapter #BO00006............$6.95Crush Proof Hose & Adapter Kit*#BO03353 ........................................$24.95* Contains hose and hose to vac adapter. Does notcontain hose to tool adapter BO00006

Bosch 5" Random Orbit Sander KitBOSCH RANDOM ORBIT SANDER KIT• 2.2 amps with variable speeds from7000 to 12000 OPM’s#BO1295DVSK................$79.955" x 8 hole PSA Pad/1295#BO00109 ........................$12.95Replacement Filter/1295#BO14127 ..........................$8.95

Bosch 5" & 6" Random OrbitSanders

• 3 amp motor for power and durability in the shop• Dust canister much improved over cloth bags• Improved ergonomics with rubber top grip• Top cap design allows easy service and cleaning• Plastic carrying case• Dual dust ports accept 1" & 1.5" hoses• Variable speeds from 7500 to 12000 opms#PC00343VSK................$74.95

Porter-Cable 5" Random Orbit Sander

5" x 5 or 5" x 8 Hole Hook & Loop#PC13909..............................$16.95343 5" x 8 Hole Hook & LoopBacking Pad #PC343001 ....$29.95343 5" x 8 Hole PSA Backing Pad#PC344001............................$29.95332 5" x NH Replacement Pad#PC13900..............................$19.95333 Replacement Pad#PC13904..............................$19.95

333 Contour Replacement Pad#PC13905..............................$19.95333 & 334 Replacement Canister#PC13950..............................$12.95Dust Collection Hose(Use with standard 11/2" Vac)#PC39332..............................$22.95Hose Adapter 11/2" to 21/2"#PC39335................................$8.95Hose /Adapter Kit for 333 & 334#PC33325..............................$29.95

ACCESSORIES FOR 332, 333, 334 & 343

much less fatigue and more control while sanding. The390 comes with a variable speed motor that ranges from7,000 to 12,000 opms, 5" / 8 hole hook and loop backingpad, a built in 1" to 1.5" vacuum hose attachment andstorage case.

PORTER CABLE LOW PROFILE RO HOOK& LOOP SANDER KIT #PC00390K ..$129.95PORTER CABLE LOW PROFILE RO HOOK& LOOP SANDER #PC00390 ............$119.95

Accessories5X8HOLE H&L BACK PAD #PC390001 ......$34.955" NO HOLE PSA PAD #PC392001 ............$34.955X8HOLE PSA BACK PAD #PC394001 ......$34.95

BOSCH ROS10 5" R/O SANDER- one speed,12,000 opms#BO10100 ............................$59.95BOSCH ROS20VSK 5" R/OSANDER 7,500 - 12,000 opms#BO20201 ............................$79.95

Accessories5X8 K/O SOFT BACKING PAD#BO34000 ..............................$16.955X8 K/O HARD BACKING PAD#BO35000 ..............................$16.955" SPONGE APPLI/ROS10 &ROS20VSK #BO13000 ..........$9.95 5" BUFF PAD /ROS10 & ROS20VSK#BO14000 ................................$9.955" PSA SOFT PAD/ROS10 &ROS20VSK #BO36000 ..........$16.95

Bosch 5" RandomOrbit SanderThe newly designed Bosch sanders have amuch more ergonomic feel whether you holdit from the top or the sides. Not only has thelook and feel been updated, the sander hasalso been re-engineered to operate at muchlower vibration levels. Maybe the most practi-cal change is the transparent dust canister.The ROS20VSK has variable speeds from7,500 to 12,000, 3/32" opms. The variablespeed sander comes with a storage case, buta single speed version, 12,000 opms, comeswith out a case.

PORTER CABLE 330 1/4 SHEET SANDER• 1.2 amp motor with 14000 OPM#PC00330............................$89.95Replacement Pad for 330 Sander#PC13597 ....................................$9.95

Porter-Cable 330 1/4Sheet Finishing Sander

Now from the true experts in sanding, get a random orbit sander that does a lot more than just cut themustard! Klingspor is pleased to offer its 5" palm style random orbit sander available in either a single-speed or a variable speed version.We’ve incorporated the latest random orbit technology into this sanderso you can achieve aggressive stock removal and swirl-free finishes at the same time. Your hand posi-tion will remain comfortable with a soft ergonomic grip and smooth operation. A special dust canister withan integrated paper filter has been included that offers extra filtering capacity. The sanders include: 1soft backing pad, 1 pad wrench; 5mm hex; 5 sanding discs and 1 special dust canister. Allsanders carry a 1 year warranty and are guaranteed for 30 days.

Pad Dampering

VariableSpeedControl

Throughthe pad dustextractionErgonomic, soft grip

Dust sealed switch

KLINGSPOR 5" RANDOM ORBIT SANDER

For optimalperformance,

we recommendKLINGSPOR

sanding discs!

KLINGSPOR RANDOM ORBIT VARIABLE SPEED SANDER#KA1893DVS • 2.2 amp motor with variable speeds from 7000 to 12000 OPMs

5" Soft Hook & Loop Backing Pad#KA00031..............................$14.95 5" Hard Hook & Loop Backing Pad#KA00032..............................$14.95Crush Proof Vacuum Hose#KA00011..............................$22.95

Vacuum Hose Adapter#KA00066................................$5.95 Adapter for 11/4" and 11/2" Hoses#KA00022................................$4.95

Reg. Price $79.95 • Sale Price $69.95

NOW ONLY $49.95

73

SANDERS


“Stearate” Aluminum Oxide Non-Loading Kling-On® (hook & loop) Discs

The new Bosch Multi-X tool is a necessarytool for either the woodworker, DIY’er orcontractor. The cordless tool can sand in avariety of tight spaces, it can cut out variousmaterials in tight spots and do it all withoutbeing tethered by a cord. A variable speedswitch enables you to dial in the optimalspeed for each different accessory.

BOSCH PS50-2B MULTI-XCORDLESS TOOL KITKit includes: (1) Hard Carrying Case, (2)Litheon™ 12V Max Batteries - BAT411, (1) 30Minute Charger - BC430, (1) Adapter, (1)Sanding Plat, (1) Sanding Paper Pad, (1) HCSPlunge Cut Blade (1-5/8x1-1/2), (3) HCSPlunge Cut Blade (3/8 x 1-1/4), (1) BIMSegment Blade (3-1/2 x 7/8)

#BO50200..............................$199.95

3-1/2" X 7/8" BIM FLUSHCUTBLADE #BO61649..................$49.95 1-1/2" X 5/8" HCS PLUNGECUTBLADE #BO61650..................$27.95

3/4" X 1-1/4" HCS PLUNGECUTBLADE #BO61651..................$12.95 3/8" X 1-1/4" HCS PLUNGECUTBLADE #BO61652 ................$11.95 3/4" X 1-1/4" BIM PLUNGECUTBLADE #BO61653..................$13.95 3/8" X 1-1/4" BIM PLUNGECUTBLADE #BO61654 ................$12.95 3-1/2" X 7/8" RIFF GROUT BLADE#BO61655................................$49.95

5 PACK K/O BOSCH TRI DISCS 60G #BT29280..........$3.9580G #BT29281..........$3.95100G #BT29282..........$3.95120G #BT29283..........$3.95150G #BT29284..........$3.95180G #BT29285..........$3.95220G #BT29286..........$3.95280G #BT29287..........$3.95320G #BT29288..........$3.95400G #BT29289..........$3.95

Bosch PS50-2B Multi-X Cordless Tool Kit6" DUAL MODE RANDOMORBIT SANDER #FS571594 ..........................$495.006" DUAL MODE RANDOM ORBITSANDER & VAC PACKAGE -INCLUDES CT 22 DUST EXTRAC-TOR #FSP2571594............$949.00

Accessories 6" FASTFIX SANDING PADHARD #FS493915 ..................$38.00SOFT #FS493916....................$38.00SUPER SOFT #FS493917 ....$38.00

INTERFACE PAD D5"#FS492212 ............................$18.50

5" Dual Mode RandomOrbit Sander5" DUAL MODE R/O SANDER #FS571536 ..........................$395.00Accessories H&L SANDING PADSUPER SOFT #FS492126 ..$29.50SOFT #FS492125 ................$29.50HARD #FS492127................$29.50INTERFACE PAD D5" #FS492271 ................$17.50

6" ETS 150/3 RANDOM ORBITSANDER #FS571540..............$285.006" ETS 150/5 RANDOM ORBITSANDER #FS571541 ............$285.00Accessories 6" HOOK & LOOP SANDING PAD -SOFT #FS486381......................$38.006" HOOK & LOOP LONGLIFESANDING PAD- HARD #FS484850 ..............$38.00- SOFT #FS491935................$38.00

5" Random Orbit Sander

6" Random Orbit Sander

5" RANDOM ORBIT SANDER #FS571610............................$170.00Accessories 5" HOOK & LOOP SANDING PAD- SOFT #FS492280 ..................$29.50- SUPER SOFT #FS492282....$29.50TURBO FILTER BAGS - 5 PACK#FS489128 ..................................$8.50

6" Dual Mode Random Orbit Sander

1500 Grit 1200 Grit 1000 Grit 800 Grit 600 Grit 400 Grit 320 Grit 240 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

VD83005 $15.95

VD83004 $15.95

VD83003 $15.95

VD83002 $15.95

VD83001 $15.95

VD83000 $15.95

VD60030 $15.95

VD60118$15.95

VD60005 $15.95

VD60044 $15.95

VD60004 $15.95

VD60003 $15.95

VD60002 $15.95

VD60001 $15.95

VD60000 $15.95

5"8 holes

ITEM #

50 PK

74


SANDERS

• 3.7 amps with variable speeds from2500 to 6000• Kit includes sander, dust hood, dusthose and plastic case

BOSCH 1/4 SHEET FINISH SANDER• 2 amp motor with 12000 OPM#BO1297DK ..........$54.95

Bosch 1/4 SheetFinish Sander

Porter-Cable Right Angle RandomOrbit SandersPORTER-CABLE 97455 (5")#PC97455 ..........................$159.95PORTER-CABLE 97466 (6")#PC97466 ..........................$164.95Replacement Dust Collection Kit:Hood, Hose, Adapter 97455, 97466#PC73333 ............................$32.955" H & L Replacement Pad#PC15000 ............................$24.956" Replacement Pad for 97466#PC18001 ............................$24.95

MODEL 352VS 3X21 • 8 amp motor with variable speeds from850 to 1300 SFPM#PC00352VS ..................$179.95MODEL 362VS 4X24• 12 amp motor with variable speeds from1000 to 1500 SFPM#PC00362VS ..................$229.95

MODEL 360VS 3X24 • 12 amp motor with variable speeds from1000 to 1500 SFPM#PC00360VS ..................$229.95

Porter-Cable DustlessBelt Sanders

REPLACEMENT DUST BAGASSEMBLY (Bag & Nozzle) for 352VS,360, 362 #PC39334..................$14.95

3" GRAPHITE PAD for 360, & 352 VSSanders #PC48118 ....................$9.954" GRAPHITE PAD for 362 Sander#PC48119 ..................................$10.95

10 PACK 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# SB41900 SB41899 SB41896 SB41895 SB41894 SB41893 SB16318 SB34346 SB32413 3/8" x 13" $7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.50

The Proxxon Bandfile is a versatile belt sander that can be used for finishing, cleaning mortis-es, de-buring metal and sculpting. The 2 sided belt arm is adjustable within 60 degress andis released with the push of a button. One side of the belt arm has a flat, steel platen whichis ideal for flat surfaces while the other side has no platen. The platen free side allows thesander to be used on convex, contoured surfaced. The sander uses a 3/8" x 13" belt and isadjustable from 300 to 700 sfpm.

PROXXON BANDFILE / BELT SANDER#PX38536 ......................$139.95

Proxxon Bandfile / Belt Sander

This Compact Belt Sander from Porter Cable can be used likean abrasive block plane. Using a 21/4" x 14" belt, the sander caneasily be used with one hand, although a detachable front han-dle is included. It’s ideal for installers, remodelers and trim car-penters. A rubber grip makes the sander easy to handle onboth horizontal and vertical surfaces. The sander can be con-nected to a dust hose if dust collection is required.

COMPACT BELT SANDER with 3 pack of belts#PC00371K ...................................................................................$119.95

1274DVS 3"X 21" BELT SANDER• 6.6 amp motor with variablespeeds from 550 to 1100 SFPM #BO1274DVS ......................$149.95

Bosch BeltSanders

Porter-Cable CompactBelt Sander

150 120 100 80 60 ComboGrit Grit Grit Grit Grit (1 of each grit)

21/2" x 14" EB26150 EB26120 EB26100 EB26080 EB26060 EB26000$5.95 $5.95 $5.95 $5.95 $5.95 $8.95

Price Per 3 Pack

• 2.4 amps, 14000 opms for power and durabilityin the shop

• Dust canister much improved over cloth bags• Improved ergonomics with rubber top grip• Top cap design allows easy service and clean-

ing• Dual dust ports accept 1" & 1.5" hoses#PC00342K ...................$49.00

Porter-Cable Model 342K Dustless1/4 Sheet Sander

Porter Cable PneumaticRandom Orbit Sander

5" PNEUMATIC R/O #PC00005 ..............$129.95

5" PNEUMATIC R/OVAC READY#PC00006 ......$129.95

5" N/H PSA PAD /PC00005#PC00036 ..........................$20.955"X5H PSA VAC PAD /PC00006#PC00037 ..........................$20.95

5" N/H H&L PAD /PC00005#PC00038 ..........................$23.955"X5H H&L VAC PAD /PC00006#PC00039 ........................$23.95

Accessories

Kling-On® Diamond Discs - Packaged & Priced in Packs of 5.

PSA Diamond Discs - Packaged & Priced in Packs of 5.400 Grit 320 Grit 280 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# PT43579 PT43578 PT43576 PT43574 PT43573 PT43572 PT43571 PT43570 PT43569 PT43568$3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50

400 Grit 320 Grit 280 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 GritITEM# PD43466 PD43465 PD43464 PD43463 PD43462 PD43461 PD43460 PD43459 PD43458 PD43457

$3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95

220 Grit 150 Grit 120 Grit 100 Grit 80 GritITEM# AR43567 AR43566 AR43565 AR43564 AR43563

$9.95 9.95 9.95 9.95 9.95

21/2" x 10 yd. PSA Rolls

Sandpaper for Profile Sanders

• Requires 15 cfm @ 90 PSI to operate at 12000 OPM’s

75


DETAIL SANDING

These easy to hold, lightweightsander/filers are perfect tools forsmall, intricate sanding and filingapplications. They are an excel-lent choice for electronic techni-cians, professionals, craftsmanand hobbyists. With its 6000reciprocating strokes perminute, sanding and filing is easy and less stressful on your wrist. Thesander/filers are designed for smoothing tight areas that are otherwiseimpossible to get to. With either of these tools, you will find yourselfsanding areas that you would often leave untouched. If you ever findyourself doing detailed work, the Wahl sander/filer is a tool you should not be without.

Wahl Detail Sander Take Care of Intricate Sanding & Filing

ELECTRIC FILER / SANDER#WH67800 ....................$58.95Kit Includes: Power Unit, 1 Sander Pad - 220 Grit,Flat Needle File, Round Needle File, TriangleNeedle File and a Half Round Needle File.

NEEDLE FILEFlat #WH67600 ........$4.95Round #WH67610 ........$4.95Triangle #WH67620 ........$4.95Half Round #WH67630 ........$4.95

Sanding Pad Pack (3)#WH67640 ......................$4.95Sanding Sheets (12)400 Grit #WH67650 ............$4.95220 Grit #WH67660 ............$4.95100 Grit #WH67670 ............$4.95Sanding Sheets Assortment(4 sheets each of 100, 220 & 400 grit)#WH67680 ......................$4.95File / Sander Assortment#WH67690 ....................$13.95

INFLATABLE ROUND SANDER 15/8" X 19/16" #KX11341........................................$39.95REPLACEMENT BLADDER /KX11341#KX11347..........................................$8.95SANDING SLEEVE ASSORT 4PK/KX11341#KX11342..........................................$9.95SANDING SLEEVE G60 3PK/KX11341#KX11343..........................................$8.95SANDING SLEEVE G120 3PK/KX11341#KX11344..........................................$8.95SANDING SLEEVE G180 3PK/KX11341#KX11345..........................................$8.95SANDING SLEEVE G320 3PK/KX11341#KX11346..........................................$8.95

Guinevere Sanding System

Angles, edges, cornersand curves — theTadpoles will sand themall. Just wrap sandpaperaround these little won-ders and sand your*concave and *convexsurfaces and profileswithout worry of sandingaway any desired contours.Get into a variety of angles with the pre-shaped angled headsof 30º, 45º, 60º and 90º. Perfect for furniture, toys, molding, etc.

E.

A.C.

B.

D.

A. Concave set sizes 1/4", 3/8", 1/2",5/8" and a thick flat sanding pad#KL12000 ............................$4.95B. Convex set w/sizes 1/4", 3/8",1/2", 3/4" and a flat, thin sanding pad#KL20000 ............................$4.95C. Three piece Convex set 3/8",7/8",1" #KL21000 ................$4.95

D. Three piece Concave set 3/4",7/8", 1/2" #KL31000 ............$4.95E. Angles set w/30 º, 45 º, 60 º, 90ºangles #KL71000 ................$4.95Complete set of all#KL50000 ..........................$19.95

*concave - hollowed or rounded inward like the inside of a bowl; arched in; curving in.*convex - curved or rounded like the exterior of a sphere or circle; arched outward.

Tadpole Contour SandersAngles, Edges and Curves Sanded without a Flaw!

Guinevere is a miniature sanding systemfrom King Arthur’s Tools that actually con-forms to the shape you are sanding.Guinevere uses four sanding grits, coarse toextra fine, mounted on inflatable rubbersanders that are fitted to a flexible shaft – Allpowered by a quiet 1/2HP (300watt) motor.This system of inflatable sanders adapts tothe shape of your work, from concave to con-vex, angled or flat.The long life sanding cloth

sleeves allow you to quickly change betweendifferent combinations of sanders and grits.

GUINEVERE TOTALSANDING SYSTEMconsists of Motor, Flex Shaft, pneumatic drumw/4 sleeves, pneumatic round sander w/4sleeves, hand pump and belt cleaning stick#KX11340....................................$299.95

INFLATABLE DRUM SANDER 15/8" X 13/4"#KX11351........................................$32.95REPLACEMENT BLADDER /KX11351#KX11357..........................................$8.95SANDING SLEEVE ASSORT 4PK/KX11351 #KX11352 ........................$8.95SANDING SLEEVE G80 4PK/KX11351#KX11353..........................................$8.95SANDING SLEEVE G150 4PK/KX11351#KX11354..........................................$8.95SANDING SLEEVE G220 4PK/KX11351#KX11355..........................................$8.95SANDING SLEEVE G320 4PK/KX11351#KX11356 ........................................$8.95

INFLATABLE DRUM SANDER 3/4" X 1"#KX11361........................................$30.95REPLACEMENT BLADDER /KX11361#KX11367..........................................$9.95SANDING SLEEVE G80 3PK/KX11361#KK00121..........................................$4.95SANDING SLEEVE G120 3PK/KX11361#KK00122..........................................$4.95SANDING SLEEVE G150 3PK/KX11361#KK00123..........................................$4.95SANDING SLEEVE G220 3PK/KX11361#KK00124..........................................$4.95SANDING SLEEVE G320 3PK/KX11361#KK00125..........................................$4.95SANDING SLEEVE G400 3PK/KX11361#KK00126..........................................$4.95

INFLATABLE DRUM SANDER 11/8" X 31/8"#KX11371........................................$49.95REPLACEMENT BLADDER /KX11371#KX11377........................................$10.95SANDING SLEEVE G50 3PK/KX11371#KK00131..........................................$8.95SANDING SLEEVE G80 3PK/KX11371#KK00132..........................................$8.95SANDING SLEEVE G120 3PK/KX11371#KK00133..........................................$8.95SANDING SLEEVE G150 3PK/KX11371#KK00134..........................................$8.95SANDING SLEEVE G220 3PK/KX11371#KK00139..........................................$8.95SANDING SLEEVE G320 3PK/KX11371#KK00136..........................................$8.95SANDING SLEEVE G400 3PK/KX11371#KK00137..........................................$8.95

GUINEVERE SANDING &POLISHING KITConsists of a small pneumatic sanding drum,a long pneumatic sanding drum, 4 packassortment of small sanding sleeves, 4 packassortment of long sanding sleeves, a brushsleeve for the small and long drum, 2 clothsleeves for each of the small and long drum,container of organic wax, micro hand pumpand belt cleaning stick.#KX11390 ..........................$109.95

11341 11351

GUINEVERE BASIC SANDING KITconsists of pneumatic drum w/4 sleeves, pneumaticround sander w/4 sleeves, hand pump and beltcleaning stick #KX11360 ..............$109.95

FLEX SHAFT SANDING KITconsists of KX11360 plus a flex shaft.#KX11350....................................$179.95

Peter from Crozet,VA - "Great sandingproducts and tools.Used you extensivelywhile I was teaching woodworking at aprivate school."


76

DETAIL SANDING

Proxxon Triangles - Packaged & Priced in Packs of 10.400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# PX00400 PX00320 PX00220 PX00180 PX00150 PX00120 PX00100 PX00080 PX00060

$4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95

Finally there is a detail sander that will sway those of youwho have resisted the lure of the detail sander. The firstof the Proxxon items to be featured in Klingspor’sWoodworking Shop, the Detail Sander is a small yetefficient tool for very tight spots, corners, sides, andnormally inaccessible areas. This premium sander uti-lizes the most popular and most efficient oscillatingmotion to give the best possible results.A variable speedcontrol from 3000 oscillations per minute to 10,000 oscil-lations per minute lets you select the proper speed foruse on numerous different materials.The actual sandingarea of the Proxxon Detail Sander is smaller than that ofmost of the other detail sanders on the market so you’ll beable to get into tighter areas, smaller corners, etc.

With the available accessories, the versatility of theProxxon Detail Sander will amaze you - add this to yourlist of must-haves for your sanding and finishing.

PEN SANDER SHEETSEach pack consists of 15 pieces of each profile and is kiss cut to help peeloff and use when needed.Total pack, 60 pieces.

PROXXON POLISHING SET POLISHING set accessory contains a non-wovenDelta pad and both a hard and a soft felt pad.This set is ideal for attaining a high-gloss fin-ish on steel and for rubbing finishes on wood. #PX28888..................$4.95HIGH SPEED STEEL SAW BLADE High speed steel saw blade accessory offersprecision cutting - even into corners. Cuts wood, ceramics, plaster and other materialsaround the home. 21/2" in diameter. Also fits Fein® Detail Sander#PX28900 ......................................................................$24.95

Here’s a multi-purpose tool that will raise a feweyebrows! This slim line machine featuresa die-cast head and machined bearingsfor a lifetime of performance. It can beused for prolonged periods for drilling,grinding, polishing, cleaning, cutting, andengraving - unlike many similar tools out therecan only be used for short bursts of use.This is ahigh speed machine with a specially balanced motorthat has an infinitely variable electronic speed control for speeds from 5000 rpm to20,000 rpm. Six triple-slit steel collets come with this unit and allow the flexibility to usea variety of drilling/grinding/cutting attachments from manufacturers everywhere. Alsoincluded are 34 bits and cutters. Among the items included are 21 cutting wheels, 4grinding discs, 4 burrs, 4 mounted points, and a wire brush wheel.

A. PROXXON PROFESSIONAL DRILL GRINDER#PX38481 ....................................................$109.95B. PROXXON FLEXISHAFT #PX28620 ....$42.95C. PROXXON UNIVERSAL HOLDER#PX28603 ......................................................$29.95BUY ALL 3 AND SAVE #PX30001 ........$164.95

Professional Drill Grinder Accomplish Multiple TasksWith This Versatile Tool

Pen Sander

A.

PS12 400 Grit 240 Grit 180 Grit

ITEM# PX28826 PX28824 PX28822$6.95 6.95 6.95

Both the discs andcones are aluminumoxide. This makes themuseful on wood, metaland other surfaces. Thecones fit on a pointedrubber drum that tightlyholds them in place buteasily releases themwhen worn. Both man-drels are excellent forhard to reach places.3mm / 7/64" shank

PROXXONIntricateSanding

A.

B.

A. PSA PAD (1-11/16") with 1/8" shaft.This pad includes anassortment of discs – 5-120 grit and 5-150 grit PSA discs#PX28982 ............................................$4.50REPLACEMENT DISCS for the Proxxon PSA Pad.Includes 10-120 grit and 10-150 grit#PX28983 ............................................$3.95

B. INTRICATE SANDING SLEEVES with 1/8"shank arbor. Sleeve measures 1-23/64" and comes pack-aged as a kit. Kit includes 5- 80 grit sleeves and 5-150 gritsleeves. #PX28987..............................$12.95REPLACEMENT SLEEVES for the PX28987.10 pack that consists of 5- 80 grit and 5- 150 grit replace-ment sleeves. #PX28989 ......................$10.95

PROXXON DETAIL SANDERPacked in a sturdy, plastic case. Complete with4 sanding pads, sanding fleece and hardand soft felt polishers.

#PX10000 Reg. ........$119.95

REPLACEMENT TRIANGULAR PAD#PX38520......................$9.95

This is the most detailed of the detail sanders.The Proxxon PenSander produces 8000, 2.5mm linear strokes per minute. It’sideal for surfaces, slots and tight corners. It’s an excellent toolfor model makers, carvers, furniture refinishers and makersalike. The tool comes with 8 attachments and 45 pre-cut piecesof sandpaper.

PROXXON’S COMPLETE LINE OF TOOLS IS AVAILABLE ON WWW.WOODWORKINGSHOP.COM

B.

Detail Sander “Affordable Quality Detail Sanding”

PROXXON PEN SANDER W/COMPACT AC 2/S ADAPTER(powers 1 tool) KIT#PX28000 ................$62.95

PROXXON 12V PENSANDER #PX28594 ................$48.95

W/ FULL SIZE ADAPTER 5/E(powers 3 tools) KIT#PX28001 ................$89.95

PROXXON Micromot ACAdapter 5/E#PX38704 ................$49.95PROXXON Micromot ACAdapter 2/S#PX38706 ................$22.95Replacement AttachmentAngles PX28594 (3 PCS)#PX28594A ..............$6.95Replacement AttachmentStraight PX28594 (4 PCS)#PX28594S ................$6.95

Cone Points A Must For Carvers!Reach tight spots quickly & easily

X-F

INE

FIN

E

A-1 C-14 K-115 PACK (5/16" x 1" x 15˚) (3/8" x 2" x 5˚) (3/16" x 1" x 21/2˚)

320 Grit CP37013 CP37018 CP37024$5.45 $5.95 $5.15

240 Grit CP37012 CP37017 CP37023$5.45 $5.95 $5.15

180 Grit CP37011 CP37016 CP37022$5.45 $5.95 $5.15

120 Grit CP37010 CP37015 CP37021$5.45 $5.95 $5.15

MANDRELSA1 MANDREL #CP38001 ....$7.95C14 MANDREL #CP38002 ..$7.95K11 MANDREL #CP38003 ..$6.95

CONE POINTS KIT Includes: A-1 Mandrel, 180 Grit Cone, 320 Grit Cone; C-14 Mandrel, 180 GritCone, 320 Grit Cone; K-11 Mandrel, 180 Grit Cone, 320 Grit Cone

Regular Price.......$30.95 #CP37000.........SALE $19.95


77

FEIN MULTIMASTERSELECT FMM 250Q250 watts , 11,000 –20,000 rpms ,16 ft cable,new QuickIN rapidchange system, starmount on output shaft,Kit Includes: FMM 250QQuick Change sandingpad, 15 sheets of sand paper, 1 universal E-cut blade, 1 rigid scraper blade,carbide blade; HSS blade #FE25001 ............................................$309.00

A.

B.

E.

C.

F.

G.

D.

Fein Multimaster ToolTHE NEW MULTIMASTER IS NOW 40% MORE POWERFUL The universal tool for renovation and remodeling is now more powerful,versatile and ergonomic than ever. Common remodeling task such asreplacing windows, flooring and tile are just some of the many applica-tions that are completed faster and with better results thanks to theMultiMaster. There are also attachments that will enable you to sandmoldings, remove caulking, sand louvers and much more. The new starshaped punch out on the accessories assures all the extra power istranslated to the accessory and making it impossible to slip. A newQuickIn tool changing system makes all accessory changes quick andtool free. Made in Germany

SANDER ACCESSORIESH&L Triangle Pad/2pk

#FE29026 ................$16.95H&L Triangle Pad with holes / 2pk

#FE36029 ................$22.95Thick Sanding Finger 9/32" 2pk

#FE59023 ................$21.95I. Universal E-Cut 11/8"

1pk #FE51018 ................$28.953pk #FE51020 ................$57.9510pk #FE51030 ..............$169.95

J. Universal E-Cut 13/4"1pk #FE52010 ................$31.953pk #FE52020 ................$62.9510pk #FE52030 ..............$189.95

K. Carbide Rasp Triangle1pk #FE01014 ................$49.95

L. Carbide Rasp Finger1pk #FE02017 ..............$49.95

M. Segmented Carbide Rasp Blade1pk #FE18016 ................$56.95

N. Thin Carbide Rasp Blade1pk #FE25010 ..............$49.95

Fein E-Cut Combo Pack Contains oneeach C, G, J #FE27040 ..........$89.95

K. L.

J.

FEIN MULTIMASTER TOP FMM 250Q250 watts , 11,000 – 20,000 rpms,16 ft cable, new QuickIN rapid change system,star mount on output shaft. Kit Includes: FMM 250Q Quick Change sanding pad,15 sheets of sand paper, 1 universal E-cut blade, 1 rigid scraper blade, carbideblade, HSS blade PLUS carbide rasp, dust extractor, profile sanding set, perforat-ed sanding pad and paper, plastic case#FE25003 ....................................................................................$399.20

SAW BLADE ACCESSORIESA. Flush Cut 31/8" Wood Blade

1pk #FE13999 ..................$30.95B. Flush Cut 31/8" HSS Blade

1pk #FE44014 ..................$56.95 C. 13/8" E-Cut Blade/Fine Tooth

1pk #FE33017 ..................$23.953pk #FE33030 ..................$47.9510pk #FE33040 ................$143.95

D. 21/2" E-Cut Blade/ Fine Tooth Tapered1pk #FE34015 ..................$25.953pk #FE34025 ..................$51.9510pk #FE34030 ................$149.95

E. HSS Segmented Sawblade 31/8"1pk #FE06015 ..................$54.952pk #FE06070 ..................$99.95

F. E-Cut Blade / Straight CRS 13/8" 1pk #FE26013 ..................$29.953pk #FE26030 ..................$59.9510pk #FE26040 ................$169.95

G. E-Cut Blade/ 21/2" Coarse Tapered1pk #FE27017 ..................$32.952pk #FE27020 ..................$64.9510pk #FE27030 ................$179.95

H. Rigid Scraper Blade1pk #FE78017 ..................$24.95

H.

MULTIMASTER WOOD KIT INCLUDES: 1-H&L Sanding Pad, 1-(5 pack) - 60 gritSandpaper, 1-(5 pack) - 120 grit Sandpaper, 1-126 Precision E-Cut Blade, 1-127 Standard E-CutBlade, 1-151 Universal E-Cut Blade #FE67402 ....................................$127.95

MULTIMASTER FLOORING KIT INCLUDES: 1-Scraper Blade, 1-Carbide Rasp (foraggressive material removal on wood, stone and concrete), 1-Convex Knife Blade (for cuttinglinoleum, carpet, rubber and cardboard), 1-133 E-Cut Blade (for aggressive wood cutting), 1-127E-Cut Blade, 1-134 E-Cut Blade #FE67411 ........................................$127.95

MULTIMASTER TILE KIT INCLUDES: 1-Thin Carbide Blade, 1-Normal Carbide Blade,1-Carbide Rasp (removes old adhesive - prepares wall surface for new adhesive), 1-ScraperBlade,1- E-Cut Blade (use to undercut door jambs and counter kicks, makes room for new tile),1-E-Cut Universal Blade #FE67399 ..................................................$127.95

FEIN MULTIMASTERSTART FMM 250250 watts , 11,000 –20,000 rpms ,16 ft cable,star mount on outputshaft, Kit includes:FMM 250, sanding pad,15 sheets of sand paper,1 universal E-cut blade, 1 rigid scraper blade, mounting screw, wrench, cardboardbox with handle#FE25000 ....................................................................................$209.00

I.

M.N.

FEIN

78


DUST COLLECTIONDust Collection Accessories

A. UNIVERSAL FLANGES6" Universal Flange for Tablesaw#WK10100................................$6.9514" Universal Flange for Tablesaw #WK10050................................$8.95B. HOSES2" x 10' Hose #WK10260 ....$10.9521/2" x 10' Hose #WK10270 ....$11.953" x 10' Hose #WK10280 ....$12.954" x 10' Hose #WK10310 ....$16.954" x 10' Clear Hose#WK10340 ..............................$36.954" x 20' Hose#WK10320........$24.955" x 10' Hose#WK10330........$23.95C. SPLICES3" Splice #WK10180 ..........$3.954" Splice #WK10190 ..........$4.95D. ELBOWS3" Elbow #WK10160 ..........$4.954" Elbow #WK10170 ..........$5.95

E.Y CONNECTORS3" Y Connectors #WK10140....$4.954" Y Connectors #WK10150....$5.954" Y Connectors with 21/2" Branch#FF10760....................................$5.95 F.T CONNECTORS3" T Connectors #WK10120....$4.954" T Connectors #WK10130....$5.95G.WIRE CLAMPS2" Wire Hose Clamp#WK13150 ....................................$.793" Wire Hose Clamp#WK13160 ....................................$.894" Wire Hose Clamp#WK13170 ....................................$.995" Wire Hose Clamp#WK13180 ....................................$.99H. BLASTGATES3" Blastgate #WK10060 ........$4.954" Blastgate #WK10070 ........$5.95

Quick Adapters - they screw into your hoses(no clamps!) and quick-fit into your tools.

A.

B.C.

D.

E.

F.

J.

K.

L.

G.

H.

I.

M.N.

Hose sections may be purchased separately.The hoses are madeof tough polyethylene that are flexible yet extremely strong anddurable. Available in the most asked for sizes: 2" x 10 ft., 4" x 10 ft., 4"x 20 ft.

"T" Connectors are for the design of a main line and a branch sys-tem to service each machine in the shop. T's are mostly used whenspace or design limitations will not allow the use of Y's. Both 3" and 4"are available.

"Y" Connectors serve the same function as T's because theyenable you to split the main line to service more than one machine.Both 3" and 4" are available.

Reducers allow you to step down from a larger main line to small-er branch lines.This step down increases air velocity near the machinewhere it's needed most. Three sizes are available from 4" to 3", from3" to 2" and for the downdraft table listed above, a 4" to 2 W'.

Splices round out the full line of special fittings for dust collection.When you need to connect full sections of hose for longer runs or touse small sections, simply clamp in a splice and you're all set.Availablein 3" and 4".

Plastic Blastgates, available in 3", 4",5" and 6" are an economicaland efficient way to close off a hose not in use and regulate air flowwhere you need it and when you need it.

Elbows are necessary whenever ductwork changes direction, suchas from the dust collector to an overhead main line and when connect-ing individual machines to branch lines. Available in 3" & 4".

O.

Aluminum 4" Blastgate#WK11420 ..................................$8.955" Blastgate #WK10080 ........$8.956" Blastgate #WK10090 ......$10.954" Blastgate Quick Coupling#FF10570....................................$5.95I. REDUCERS21/2" to 21/4" Adapter#FF10590....................................$4.954" to 3" Reducer #WK10110 ....$4.953" to 2" Reducer #WK10200 ....$3.953" to 21/2" Reducer#WK10410..................................$4.954" to 21/2" Reducer#WK10440..................................$4.955" to 4" Reducer #BH19246 ......$6.955 GALLON SEPARATOR LID#WK20490 ................................$24.95FLOOR SWEEP 4" Port - 21" Wide#WK10030 ..................................$7.95GROUNDING KIT#BH19250 ....................................$9.95J. QUICK ADAPTER

4" Adapter #FF10360 ....$5.954" to 21/2" Adapter #FF10421 ....$5.954" to 21/4" Adapter #FF10460 ....$5.955" x 4" Adapter #FF10440 ....$5.95K. 2.5" TO 1" STEP ADAPTERInternal Dia. Fits 11/4", 11/2" & 21/2";Outer Dia. Fits 1", 11/4" & 2"#BH19249 ....................................$4.95L. 16" X 13" FUNNEL W/4" PORT#BH19219 ..................................$19.95M. NON-QUICK CONNECT 4" - 21/4"#DT50482 ....................................$4.95N. 4" QUICK CONNECTDISCONNECT #FF10470 ..........$5.95O. 21/2" UNIVERSAL DUST PORT#WK10420 ..................................$5.49

STEEL BAND HOSE CLAMPS2" #WK10250 ........................$.8921/2" #WK13130 ........................$.893" #WK10210 ........................$.99 4" #WK10220 ........................$.995" #WK10230 ........................$.99

B. Fein® Turbo IIAutostart VS#FE92025 ................$399.00

C. Fein® Turbo IIIAutostart VS#FE92026....................$469.00

A. Fein® Turbo IAutostart VS#FE92024 ................$299.00

Model A. FE92024 B. FE92025 C. FE92026Autostart Yes Yes YesVariable suction control Yes Yes YesVoltage 120V 120V 120VWatts 1000W 1050W 1200WStatic water lift 90in. 90in. 99in.Air flow 116cfm 116cfm 126cfmWeight 173/4 lb. 281/2 lb. 36lb.Power cord 16ft. 16ft. 16ft.Hose length 16ft. 16ft. 10ft.Hose Diameter 11/4 in. 11/4 in. 21/4 in.Capacity dry 6gal. 9gal. 15gal.Capacity wet 5.3gal. 6.8gal. 12gal.Noise at 31/2 ft. 62dB(A) 57.8dB(A) 57.8dB(A)

79

DUST COLLECTION


4" Floor SweepDust Hood

4" FLOOR SWEEP DUST HOOD#FF30001 ..................$49.95

Once hooked to a 4” hose from your dust collectionsystem, you basically have a vacuum cleaner for theshop. The Floor Sweep allows you to take the col-lection to the dust instead of the other way around.This accessory can totally finish off your dust collec-tion system. When in a stationary position, it alsofunctions as a regular floor sweep.

CONTRACTOR SAW DUST COLLECTORBAG #KP10000..........................$39.95

Contractor Saw Dust Collector Bag

Filter Dustbag

This is the one machine that will sit in your shopand gather dust. Fine dust that is. With its threespeed fan, automatic shut off and .3 micron filter,this fine air filter circulates shop air and capturesthe finest, and most harmful, dust that otherwisestays suspended. Even with an efficient dust col-lector and ceiling mounted machine, you stillneed a Fine Air Filter.

This 1 micron top bag fits 20" dust collectors and allows plen-ty of air flow while remaining 99% efficient.

1 MICRON FILTER DUSTBAG 20"#BH11765 ..................$44.95

Designed with the mounting holes at90 degrees from each other, the JHooks can be used to hang 4 inch dustcollection hose from floor joists oralong your wall.

4" J HOOKS (5PK) #BH11748 ......................$14.95

3 SPEED FINE AIR FILTER#WK17460 ..................$109.95REPLACEMENT FILTER /WK17460#WK36150........................$10.95

This is the final step to a first class dust collec-tion set up. The remote control system allowsyou to activate your dust collector from any-where in the shop. Up to 75 feet away. For avery small additional investment, you can takeyour dust collection system from ordinary toextremely practical and efficient. Comes readyto plug in and has 2 remote switches.

REMOTE DUST COLLECTORSWITCH #WK30380..................$44.95REMOTE DUST COLLECTORSWITCH 220V #WK33460 ......$44.95

Remote Dust Collector Switch

Quantity 1 10 2023/4" #WK21050 $.79 $.59 $.4931/4" #WK21060 $.89 $.69 $.5941/4" #WK21070 $.95 $.69 $.69

Dust Hose Hangers Metal hose hangers are mandatory for a properly installeddust collection system. They not only keep the hose inplace and out of the way, but they also provide a place tohelp conceal the grounding wire.

Micro Vacuuming ToolsReaches Those Hard To Get At Places

Cleaning up of those last bits of sandingdust or sawdust can be tedious. You cango through the motions with a shop brushand tack cloth but you can’t use these in

small, hard-to-reach areas. So, just forthese reasons, we are pleased to offer theMicro-Vacuuming Tools. With a variety ofdifferent nozzles, you’ll be able to take careof all of those pesky problems. You caneven use this device on your power tools tokeep them clean and running efficiently.Simply use the included attachment tohook the micro tools to your vac and you’reready to go-it couldn’t be easier! Connectsto 11/2" and smaller hose only!

MINI-VAC ATTACHMENT KIT#MV30000............................$9.95

The Dust Cutter Dust Collection bagis perhaps the easiest option for dustcollection on your contractor saw. Itfits any contractor saw type machinethat has an enclosed motor and abase measurement of 20" x 17". Thebottom of the bag has a zipper toallow for easy cleaning withoutremoving the bag from the saw.Leaving the zipper undone, a funnelis created that will drop the dust intoa pan or container of your choice.With the zipper closed, you can alsoconnect either a 11/4" or 21/2" dust col-lection hose to the bag. Use gravityor suction, the choice is yours.

Dust Collection Nozzlew/StandThis fully adjustable dust collection nozzle fits any 4" flexible hoseattached to a dust collector and provides a quick and easy pick-upsource for dust producing machines. The stand can be adjusted a full360˚ and 180˚ to the side. It adjusts from 24" to 431/2". Nozzle measures11/8" x 121/2".

DUST COLLECTION NOZZLE W/STAND#WK22670 ..................$44.95

Mobile Dust ExtractorCT 33 Hepa

MOBILE DUST EXTRACTOR CT 33HEPA #FS583368 ......................$580.00Disposable Filter Bags/ CT 33 - 5 Pack#FS452970 ....................................$31.00

3 Speed Fine Air Filter

4" J Hooks

Lathe Dust HoodOpening measures 8" x 8" andaccepts a 4" hose.

LATHE DUST HOOD#BH19217 ......................$19.95

80


FLOOR SANDING / HARDWARE

Silicon Carbide Paper Edger Discs - 50 Pack120 Grit 100 Grit 80 Grit 60 Grit 50 Grit 40 Grit 36 Grit 24 Grit 20 Grit 16 Grit

3/0 2/0 1/0 1/2 1 11/2 2 3 31/2 4ITEM# ED96177 ED90804 ED90803 ED90802 ED97241 ED97242 ED97244 ED97247 ED97248 ED972497"x 5/16"(8-Slit) $15.23 15.23 16.28 18.90 19.95 21.00 23.10 26.78 31.50 32.55

Mesh ScreenDiscs

150 Grit 120 Grit 100 Grit 80 Grit 60 Grit

ITEM# ME93494 ME93495 ME93496 ME93497 ME9349813" Disc $2.00 2.42 2.80 2.93 3.54ITEM# ME93505 ME93506 ME93507 ME93508 ME9350915" Disc $2.30 2.45 2.82 3.42 4.13ITEM# ME93510 ME93511 ME93512 ME93513 ME9351416" Disc $2.64 2.79 3.24 3.93 4.74ITEM# ME93515 ME93517 ME93518 ME93519 ME9352017" Disc $3.35 3.54 4.10 4.97 5.99

16" x 1" Price Each Price 10+

FM93538 White Soft Polishing Pad $4.45 $3.95FM93539 Red Buffing Pad 4.45 3.95

17" x 1"FM93540 White Soft Polishing Pad 5.65 4.95FM93541 Red Buffing Pad 5.65 4.95

Floor MaintenancePadsWHITE = Soft PolishingRED = Buffing

FLOOR SANDING Other floor sanding items available on WWW.WOODWORKINGSHOP.COM

Silicon Carbide Paper Floor Sanding Discs120 Grit 100 Grit 80 Grit 60 Grit 50 Grit 40 Grit 36 Grit 24 Grit 20 Grit 16 Grit

3/0 2/0 1/0 1/2 1 11/2 2 3 31/2 4ITEM# PD97448 PD97447 PD97446 PD97445 PD97444 PD97443 PD97437 PD97441 PD97440 PD9743915"x 2" $1.19 1.19 1.32 1.43 1.61 1.64 1.81 2.26 2.35 2.52ITEM# PD95430 PD95538 PD95537 PD97130 PD97131 PD97132 PD95139 PD97134 PD95317 PD9557716"x 2" $1.42 1.42 1.51 1.68 1.87 1.92 2.14 2.49 2.71 2.88ITEM# PD98101 PD98102 PD98103 PD98104 PD98105 PD98106 PD98107 PD98109 PD98110 PD9811117"x 2" $1.61 1.61 1.74 1.93 2.11 2.21 2.44 2.91 3.09 3.27

Drawer Guide Jig

Concealed Hinge Boring ToolThis one jig allows you to drill the holes for both the hinge andthe mounting plate for all brands of European hinges. All you’llneed is a 13/8" forstner bit and a #5 hinge bit. The distance fromthe door edge to the hinge hole is adjustable and easily repeat-able. A built in V-shaped center mark enables you to put thehinge hole exactly where you want it. Made of high impact poly-carbonate, the jig will last for years even under frequent use.

CONCEALED HINGE BORING TOOL#EUR-014 ..............................$8.9513/8" FORSTNER BIT#FB-010................................$15.95#5 HINGE BIT #PA79141 ......$8.95

The drawer guide jig will work with regular or full extension slides.Yousimply adjust the sliding drill guides to where they match up with theholes on the drawer slide. Put the guide in the cabinet, using the cen-ter-line to match up to your reference mark, and drill your pilot holes.All marks will be 90 degrees to the cabinet edge. This durable poly-carbonate jig offers repeatable accuracy and a very affordable price.

SHELF PIN DRILLING JIG#BH19651 ........................$24.955MM #BH19139..............$9.951/4" #BH19138..............$9.95

DRAWER PULL JIG#BH19650 ......................$12.95

Shelf Pin Drilling Jig Drawer Pull JigThis jig provides a quick and accurate way todrill shelf pin holes in any project. It preciselyspaces shelf pin holes 1.25" apart, at either37mm or 64mm from the edge of your work.By indexing the jig with a shelf pin, any lengthmay be drilled.The shelf drilling jig comes witha 1/4" self centering drill bit.

This easy to use jig enables you to quicklyand accurately locate the drilling holes fordrawer pulls. Mark center line, choose boringwidth needed and position wooden guide forcorrect spacing and lock. Align over centerline and mark holes. Remove jig and drill.

Our side mounted, telescopic, full extensiondrawer slides carry heavy loads smoothlyand silently with the help of double ballbearing raceways.With a 100 lb rated on an18" size, this rust resistant, nickel platedsteel slide incorporates a positive “antibounce back” when closed. The slidesmeasure 1/2" thin and 13/4" high.

DRAWER GUIDE JIG #EUR-015............$9.95

.75" TABLE TOPFASTENERS 10 PK#SL20000...............$2.95

Screw into undersideof table top to fastenthe apron of tables tothe top. Sold in packsof 10.

Table Top Fastener

Drawer Slides

FIGURE 8 DESKTOP CLIP(10PK)#SL20001............$2.99

FULL EXT DRAWER SLIDE/PAIR 12" #WY10062 ....................$9.9516" #WY10015 ..................$10.9518" #WY10016 ..................$11.9520" #WY10017 ..................$12.9524" #SL20123....................$14.9522" #SL20124....................$13.95

SELF CLOSING FULL EXT DRAWERSLIDE14" #SL30914....................$10.9516" #SL30916....................$12.9518" #SL30918....................$13.9520" #SL30920....................$14.9522" #SL30922....................$15.95

81


SHOP HELPERS

There is finally an apron designed by cabinet makers forcabinet makers. With extra long straps, the apron will fit allsizes and can be tied off in the front or the back. Its longlength gives total protection for your clothing. Convenientchest high pockets are ideal for note pads, calculators orpencils. The large side pockets, not front pockets that get inthe way, come with top flaps to keep out dust and are sizedto hold everything from calipers to cell phones.When it’s timeto take a break, there is even a strategically placed piece ofVelcro that holds the bottom of the apron up on your shoul-der strap. This fine apron is made of 100% cotton and iswashable and color fast.

Cabinet Maker’s Apron

TORMEK APRON #TM90001............$39.95

Canvas Aprons

Leather Aprons

B.

A. 16 POCKET FULLAPRON#PP83200............$22.95

B. 8 POCKET FULL APRON#PP82208............$16.95

A.

Most woodworkers are constantly misplacing theirpencil in the shop and usually the tape measure is notclose when you need it and wearing a tool belt in theshop can cumbersome. The Sidekick is the perfectsolution. It’s made to hold a pencil and tape measureonly. Made of top quality leather and heavily stitched,it loops on to any belt up to 13/4" and has a steel tapemeasure clip that is riveted into place. Perfectly sized,you won’t even know the sidekick is there until youneed your pencil or tape.

Sidekick Tape andPencil Holster

SIDEKICK TAPE & PENCIL HOLSTER #WD20000 ........................$16.95

A. SHORT APRONWITH FLAPS#PI23320 ............$54.95B. LONG APRONWITH FLAPS#PI23330 ............$52.95

The saddle leather aprons feature small top pockets that are ideal for pencils,scales other small items. The bottom pockets are larger and have flaps abovethem to keep out the saw dust. Adjustable cross shoulder straps keep the apronfrom hanging on you neck.

A. B.

Mug BossTurn any coffee mug into a desk top “Tool” organizer.

#PP99981..........$4.95 Buy 3 or more pay $4.00"Great Gift for Your Woodworking Friends and Family"

The ultimate achievement in a great tool bag is function-ality. The first goal is to see and access your hand tools

instantly while the second goal is to keep the toolssecure, covered and in place during storage or trans-

portation. All VETO PRO PAC bags are designedwith these functions in mind. Day to day use

requires strong, durable materials.Polypropylene is used on the base and thesides are made of a weatherproof, PVCimpregnated denier material. The LC meas-ures 13.5" x 19" x 9.5" and features 57pockets

of varying sizes and has capacity for 75 toolswhile the XL model has 67 pockets and has the

capacity for 100 hand tools. All of the VETO bagshave been designed to, and have successfully, eliminatedthe frustration and aggravation we’ve all experienced tryingto store, organize, transport and access hand tools.

VETO PRO PAC TOOL BAGXL #VP10000 ..........$149.95 LC #VP20000 ............$129.95

Veto Pro Pack

Color may vary.

ANTI-VIBRATION GLOVESSMALL #OC42201 ..........$19.95

LARGE #OC42200 ........$19.95X-LARGE #OC42202 ....$19.95XX-LARGE #OC44300....$19.95

Anti-Vibration Gloves Your Hands Will Thank YouUsing power tools and some hand tools can really makeyour hands uncomfortable and can cause long-termdamage even up into the shoulder area. Try these Anti-Vibration gloves. The palms are filled with a gel thatabsorbs the vibration caused by power tools and cush-ions while using hand tools. A cut-out finger design andan elastic and terry cloth back make a glove that isextremely comfortable.Your hands will thank you!

While sanding your latest project, how did thosetired legs feel? We’d guess pretty bad since mostshops have a concrete floor. Here’s your dreamcome true - the Dyna-Mat. Made of a dense foamthat’s stiff enough to take years of use in your shop,yet soft enough to give you a cushiony surface tostand on that reduces fatigue and pain, the Dyna-Mat is a much needed tool for every woodworker.

DYNA-MAT FLOOR MAT (2' x 3')#DM00021 ..................................$15.953 OR MORE ....................$12.95 EACH

You won’t need any clamps to hold yourworkpiece down when you use this gripperpad.This is the best pad of this type that wehave found. It incorporates a “mesh” designso the sanding dust falls through the padand doesn’t lessen the ability to hold fast.Stay-Put gripper pads are thicker than mostso there’s less damage to your workpieceand more power to “stay put”.

BLACK MESH ROUTER PAD Size: 2' x 3' #RP19116 ........................$7.95

Black Mesh Sanding Pad

Anti-Fatigue Floor Mat

This urethane super-gripping pad fromKlingspor’s Woodworking Shop allows you tosand and rout small or irregularly shaped itemswithout using clamps or nails. Made of a urethanerubber with urethane elastomer adhesives, thispad is sure to hold fast items like door frames,plaques, etc. Pad size 2' x 3'.

Gripper Pad Roll It Out and Forget About Using Clamps

GRIPPER PAD #RP13515 ..........$8.95


SHOP HELPERS

82

Magnetic Parts TrayHow much time gets wasted looking for that one nut orbolt that gets dropped and rolls away to some unseenplace? You can now fix that problem forever. Magneticparts trays are the ideal accessories for any shop.Whether your shop is for woodworking or automechanics or anything in between, if there areloose part like washers, nuts or bolts, magnetictrays will help keep them together.

MAGNETIC PARTS TRAYROUND 6" #GT67440 ..........$5.95 9-1/2" X 10" #GT67442 ......$12.956" X 14" #GT67444........$10.95

Wrap N StrapCords are always a source of aggravation and clutter.Whether extension cords, appliance cords, compressorhoses or even rope, they are seldom kept neatly in place.Wrap N Strap cord straps will keep any cord or excess cordneatly organized and in place. Offered in sizes ranging from 9to 24 inches, there is a Wrap N Strap for anything that needsto be secured. Everything from small appliances, hand toolcords, compressor hoses to jumper cables, ropes on watercraft, camping gear and tie downs for RVs and more.Wrap NStraps are like clamps, you can never have to many.

WRAP N STRAP FASTENERS

9" (5PK) #WP90000 ............................$7.9512" (5PK) #WP91200 ..........................$9.9524" (3PK) #WP92400 ..........................$11.95

The next time you get a splinter, take it outwith the tweezers that have a built in magni-fying glass.No bifocals needed with this tool.Just hone in on the splinter and snatch it out.Not only are the tweezers good for removingsplinters, they are an excellent tool for manydifferent detail applications. Whether remov-ing debris from a wet coat of finish or repair-ing a detailed piece of small work.

5 X Tweezer & Magnifier

TWEEZER & MAGNIFIER#GE42500 ......................$6.95

The new Mini Lingo E/D moisture meter has a bright, easyto read digital display and a moisture measuring range from6 to 45%. This wide range means it measures low enoughfor professional woodworkers, cabinet makers and hard-wood floor installers but also reads high enough for con-struction lumber, wood turning blanks and more. Above10%, the meter reads in 1% but reads at .1% incrementsbelow 10%. The new mini lingo comes with 2 settings forcalibrations of different wood species. Simply push the pinsinto the wood surface to get your reading.

MINI-LIGNO E/D MOISTURE METER #LI10001.............................................$119.95

Wagner® Pinless Moisture Meter

Mini-Ligno E/D Moisture Meter

This Wagner meter has a deep penetrating, pin-free nar-row sensor that makes the meter ideal for narrow piecesof wood like molding and trim work. Equipped with quick-reading LED indicators which measure moisture from 4%to 22%, the meter is easily read in dim light. The L609penetrates 1/2" into the wood so stains and finishes do notaffect the reading. Each unit comes with an instructionbook which includes species adjustments for more thanone hundred of the most used hardwoods and softwoods.Includes instructional CD.

WAGNER MOISTURE METER#WM60900 ...................................$179.00

Well, no electricity and no batteries areneeded to operate this system—just goodold arm power (and not really much ofthat!). This extra-large, oversized dustpanhas become a favorite at Klingspor’sWoodworking Shop because it onlytakes one person to operate. Sit the panon the floor or on the ground. There’s noholding necessary and what a load it col-lects! You empty it only once.The dustpanstill has its place in the woodworking shop.Use the dustpan with our horsehair/polyblend brush and you’ve got a great team.

This brush isso soft youmight evenwant to useit to dust your furniture.

Oversized Dustpan& Soft BrushClean-Up The Way It Should Be Done

DUSTPAN 17" WIDE, 9 1/2" DEEP#GT00010 ......................$12.95HORSE HAIR BRUSH#HB44003......................$12.95BUY THE KIT & SAVE#GT00000 ......................$20.95

Got a nasty splinter and need some precision? Thesejewels will take care of the tiniest of them all. They trulyhave pinpoint accuracy and will last a lifetime. Each paircomes in a handy plastic tube for easy carrying andstorage. Keep some handy in the shop and around thehome. Fits on your keychain!

Precision Tweezers

#UB52000..................................$4.95

This sophisticated, highly sensitive electronic tool offers fea-tures and capabilities found more on expensive professionalmoisture meters. The compact, ergonomic meter is easy tooperate and useful when selecting lumber. It is ideal for profes-sionals who require pin-point accuracy when measuring mois-ture content in lumber, green wood, timbers, concrete, drywall,plaster and other construction materials. The meter has an illu-minated LCD bar graph display and large scale that displaysmoisture in wood ranging from 0 to 44%.

PRECISION DIGITAL/LED MOISTURE METER#GE80000 ............................$69.95

Precision Digital LEDMoisture Meter

The Lumber Wizard is a powerful precision handheld metal detector designed specifically forwoodworkers. The Lumber Wizard provides pow-erful and precise detection of small metal objectsthat can be buried deep inside new or reclaimedwood. Designed for noisy shops, the detectorvibrates as it sounds. This tool is great for theshop as well as the saw mill.

This metal detector has been designed to detect metalobjects under soil, sand, glass, plastic, wood and cloth. TheLittle Wizard is an essential shop tool for anyone who workswith reclaimed lumber.The $20.00 spent on this tool will eas-ily pay for itself by prolonging the life of your cutting tools.

LUMBER WIZARD #LW10001 ......$89.95

LITTLE WIZARD METAL DETECTOR#LW10000 ............................................$19.95

Little Wizard Metal DetectorFind Metal Objects Before They Ruin Your Cutting Tools

Lumber Wizard A True Safety Product That Could Save You,Your Machinery AndYour Blades

SHOP HELPERS


83

This is a fast and easy way to store your tools.The 24" magnetic tool bar securely holds a widevariety of tools from turning and carving toscrewdrivers and hammers.

Magnetic Tool Bar

MAGNETIC TOOL BAR13" #MS10000 ............$14.9524" #MS20000 ............$18.95

You can’t believe the strength of these magnets untilyou actually have them in your hand. Each of thesetwo magnets have several pounds of holding strength.They are like a refrigerator magnet on steroids. Theyhave so many uses. Use them to hold wrenches onthe cabinet of a machine, hold keys in secret places,chuck keys on drill presses, not to mention using themto hold cabinet doors closed by recessing them in theback of the face frame. The uses are endless.

1" RARE EARTH MAGNET#MS90003 ......................$4.49

RARE EARTH MAGNET 5PK3/8" #MS90005 ..............$5.951/2" #MS90006................$9.95

Rare Earth Magnet

These miter sliders are the best way tomake a variety of jigs. Each miter slider ismachined perfectly to fit in a standard 3/8"x 3/4" miter track and is adjustable for aperfect, no slip fit. Included with each miterslider are plans to build a crosscut jig, miterjig and a feather board.

18" INCRA MITER SLIDER#IMS-101....................$16.95 each

24" INCRA MITER SLIDER #IMS-102....................$21.95 each

Incra Miter Slides

These nylon brushes are great for clean-ing deep crevices and hard to reach cor-ners. They are soft enough not to scratchmost surfaces while still stiff enough toeffectively remove grit and grime.They arevery handy when restoring furniture.

12 Piece Nylon Brush Set

12 PIECE NYLON BRUSH SET#WK24800 ....................$7.95

12 PIECE BRASS BRUSH SET#WK24810 ....................$8.95

12" Drill Extension Use with Sanding Mops,Foam sanding pads, orMushroom Buffs for get-ting to hard to reachareas. - Great forWoodturners

12" EXTENSION1/4" Shanks #CY36212 ..........$9.95

6" FORSTNER BIT EXTENDER3/8" Shanks #FF16000........$12.95

As everyone knows, solid wood frame and panel furniture and doors have to be built withexpansion and contraction in mind. If you don’t, the wood will, more than likely, crack.SpaceBalls are made of rubber and slightly larger than the 1/4" groove they fit into for asnug friction fit. Simply size your panel smaller on all sides by 1/8" and insert theSpaceBalls in thegroove. After assembly,your panels will be auto-matically centered in theframe and will be free toexpand and contractwith the seasons. Plus,when your panels are attheir smallest, they willnot rattle.

Spaceballs No more rattling panels!

SPACEBALLS 100 PACK#RO10000 ............................$4.95BUY 5 OR MORE..........$3.95 EA

Slideez lubricates wood, metal or plastic and lasts muchlonger than other forms of lubrication. It prevents binding ofall moving parts. Drawers, windows and doors work mucheasier with Slideez. Slideez also excels as a rust preventativefor many metal tools. This product is non flammable, will notstain and contains NO silicon.

BEHLEN SLIDEEZ 4OZ #B7501203..............$5.95

Slideez

8" Hold DownPerfect For Virtually All Projects

There is no more simple bench clamp or onemore useful than this hold down clamp.Simplydrill a 3/4" hole in any flat work surface andhave a instant hold down clamp. No shopshould be without these practical items.Excellent for carving, routing, sanding or anyother process where the wood has to stay still.

8" HOLD DOWN#ACC1708 ....................$10.95

CORNER CHISEL #BH19592 ....$12.95

Ball Bearing Rollers can be used in manyplaces in the shop. They can be used tomake outfeed tables behind your table saw,planer or bandsaw. Any place where you typ-ically move lumber, sheet goods or productcan benefit from the Ball Bearing Rollers.Unlike many roller stands, the ballbearingscan move in all directions.Assembly lines, fin-ishing tables and work surfaces can easily becovered with ballbearings allowing anythingto be moved effortlessly in any direction.

Ball Bearing Rollers

BALL BEARING ROLLER 5/8"(6 PACK) #BH19100K..........$22.95

Corner Chisels Quickly Clean Up Corners

CORNER CHISELS - Pair#CN00175 ................................$22.95

There is no better tool for cleaning up those hard to getareas. The corner chisel is ideal for removing glue linesfrom 90 degree joints, drawer corners and any othertough areas.The blade width is 1/4" wide and 3" long. Inthe pair, one chisel is bent left and one is bent right.

This corner chisel is the answer to clean, quick andaccurate mortising. Whether you’re hand cutting orrouting, this 3/8" wide, 90 degree pre-sharpened,spring loaded HSS blade gives you an edge whenforced into a corner.

Corner Chisel Quick, Clean Mortised Corners

With a powerful magnetic base, this light will adhere to any steel surface. Useon drill presses, bandsaws, scroll saws and many other machines where youneed extra visibility. Also good for automotive use and general workshop light-ing. The flexible 14" arm may be positioned in a variety of ways to accommo-date different machines and applications. 40 watt bulb not included.

Magnetic Light

MAGNETIC LIGHT #DT25869 ........$24.95

84


SHOP HELPERS

More than dovetails can be cut with thissaw. The incredibly sharp Shark Saw canbe used to flush cut, do craftwork and anyother detail work.The saw cuts on the pullstroke, which maximizes the control andaccuracy of the cut. A push button bladerelease makes changing the blade andsaw storage fast and easy.

6.5" DOVETAIL SAW#S102204 ......................................$15.9524 Pt. Replacement Blade#S012204 ..................................$10.9519 & 24 TPI Double Blade- Not Shown #S012205 ..................$18.95

Shark Saw 6.5" Dovetail Saw

Shark Saw uses the innovative pull-to-cut blade. Every aspect of its design, theshape of the teeth, thickness, balance and even the angle of the blade to thehandle, was created to ensure maximum performance and minimal fatigue.

GENERAL CARPENTRY12" 14 TPI #S102312 ............$20.9519 TPI Replacement Blade#S012410 ..............................$17.95

14 TPI Replacement Blade - Not Shown#S012312 ..............................$14.95

Shark Saw General Carpentry Saw

SHINTO SAW RASP - 11" BLADE#JSW-040 ....................$24.95

Shinto Saw RaspShinto Saw Rasp is manufactured fromhigh quality saw blades with coarse teeth,11 per inch on one side and 25 per inchon the other. Because of the saw toothdesign, clogging is eliminated. Use thecoarse side for shaping and very rapidstock removal and the fine side for the fin-ish cut. Wood carvers love these rasps.They are also suitable to use on plastics,fiberglass and soft metals.

BACK SAW 12" 12TPI#ACC66012 ....................$9.95

HAND SAW 22" 7TPI/8PPI#ACC66221 ..................$16.95

The Pony line of hand saws use Fineline Technology that provides 3 diamond ground cut-ting edges on each tooth as opposed to the typical hard point. Induction hardened teethprovide up to 5 times more cutting life. The Western Style saw has 8 tpi and can be usedon wood, MDF and plasterboard requiring coarse cuts. For dovetails and miter box appli-cations, the Back Saw with 12tpi is the perfect fit. Both saws cut on both the push andpull stroke.

VERITAS DOUBLEFLUSH CUT SAW#VT53601 ................$25.95

Flushcut Saw

Pony Saws

GORILLA TAPE - 105' #GG00356..............................................$9.95

Gorilla TapeGorilla Tough, now on a roll. Gorilla Tape bonds tothings that ordinary tapes can’t, including brick,stucco, wood and more. It can even be used inplace of electrical tape. Made with double thickadhesive, strong reinforced backing and a tough allweather shell, it’s the biggest, strongest thing to everhappen to tape.

The Deluxe Universal Razor Saw is the per-fect saw for model and miniature making anddetailing in carpentry and cabinet making.It’s razor sharp teeth will cut all types ofwood, plastic, copper and brass.The Universal Razor Saw with an Aluminummiter Box is the perfect set up for all arounddetail work. The miter box, with .014” kerfsand 90, 45 and 30 degrees, has channels grooved in the bottom to help hold dowels andstrips in place. It can be used with materials up to 15/16" thick and 2” wide.

DELUXE UNIVERSAL RAZOR SAW 24 TPI #ZN35560 ................$9.95DELUXE SAW & MITER SET #ZN35221 ..............$19.95

Deluxe Universal Razor Saw

DOUBLE FINE SAW 81/2"23 PT & 18 PT #S102450 ......$27.95

23 & 18 TPI Replacement DoubleBlade #S012450......................$18.95

Shark Saw Fine Cut Saw

This simple roller design makes it easy to apply thecorrect pressure to laminates and veneers. Thedense, 3" rubber roller is non-marking and will workright up against a wall for those flush applications andwill leave a scratchless finish. Overall length is 12"

J Roller

J ROLLER #BO0034601 ..............$16.95

FRANKLIN TITEBOND COLD PRESS VENEER 16OZ #FG05175 ....................................................$9.95

VENEER TAPE 3/4" X 650'2 HOLE#SV20005 ..............$6.95

Veneer SoftenerPro-Glue veneer softener is the professional choice for taming curved, wavyor buckled veneers. Used only on un-backed veneers or solids, Pro-GlueVeneer Softener is applied to the wood with the convenient trigger sprayerand allowed to soak in, penetrating all the fibers; then it is placed under aweighted platten or board and allowed to rest, generally overnight. Theresult is a veneer that is flatter, more flexible and much easier to work with.

PRO-GLUE VENEER SOFTENER 16OZ #VC00122 ............$9.95

VENEER EDGE TRIMMER#VF10000 ....................................$9.95EDGE TRIMMER BLADES (5)#VF20000......................................$2.95

Veneer Edge Trimmer

This heavy duty roller stand helps turn a two man job into one. The13" smooth roller adjust from 28" to 43" and will support 150lbs whileonly weighing only 12 lbs.

Heavy Duty 13" Roller Stand

HD 13" ROLLER STAND #J709207 ..............$39.95



85

Glue Bottle with Brush

GLUE SPREADER KITNEW LOWER PRICE#BH19119..............$14.95

ACCORDION SQUEEZE BOTTLE#CA00505...........................$2.95

BISCUIT GLUE BOTTLE#BH19042 .......................$6.95

GLUE BOTTLE WITH BRUSH#FF01000..................................$5.95

GLUE INJECTOR #BH19405 ............$29.95

This yellow glue formula has been made especially forKLINGSPOR. Klingbond glue has met and exceeded the

standards set and used by major furniture manufacturers.As far we know, this is one of the few

glues available to home wood-workers that does. It is fast tack-ing, fast setting and when proper-

ly applied, it develops bondsstronger than the wood

itself. Klingbond is asuperior strength aliphat-ic resin glue specially for-mulated to work on hard-woods and soft woods aswell as many otherporous surfaces. For theperfect all-around glue foryour shop that is non-haz-ardous, solvent resistantand heat and moistureresistant, Klingbond is theglue for you. Remember, ifit’s good enough for manu-facturing environments, it’sgood enough for you.

KLINGBOND GLUEGallon #KB12800 ........$17.95 Quart #KB32000 ..........$8.95

Glue Injector Forces Glue into Tight Spots

Accordion Squeeze Glue Bottle

Biscuit Hole Glue Bottle

Got a tight spot that needs a little glue? Well, this handy lit-tle glue dispenser will get the glue right where you need it.Fix loose chair or table legs or use the tiny pinpoint nozzleto get into the toughest little opening. The soft, yet durablebottle design allows you to gently squeeze just the rightamount of glue into the desired spot.

This glue container is a very efficient way to storeand use wood glue. The container comes with a lidthat keeps air away from the glue and the glue brushsimultaneously. Just leave the supplied glue brush inthe glue well and put the top on. When using theglue, the lid stores easily on top.

Need to get some glue into a tight spot? With this deviceyou’ll be able to “squeeze” and force glue right where youneed it. It’s built like a heavy-duty syringe that offers maxi-mum pressure to “push” glue in to the tiniest of spaces.Perfect for repairs and restoration work.

Shoot the glue right where it needs to be whileusing biscuit joinery. This slotted dispenserapplies an even coating of glue for perfect holds.

Klingbond Glue The Industry’s Best Yellow Glue

With all the new joining systems, jigs, etc. on the mar-ket today, it’s hard to get the right amount of glue youneed in the right spot.Whether you’re gluing in pinpointsituations, biscuits, dowels, butterfly’s, mortise andtenons, dovetails or flat surfaces there’s a “nozzle” to fitalmost any situation. For extended periods of gluing,there’s a built-in “wet-well” that keeps the glue from dry-ing on the tip. And everything fits into the attractive anduseful base.The set includes: 1 roller head for flat surfaces, 1 flatnozzle for biscuit joinery, 1 pinpoint head for precisiongluing, 1 round head for 1/2" dovetails, 5 heads fordowel holes (1/4", 5/16", 3/8", 7/16", 1/2"), 1 wet-well, 1adapter cap, 1 base unit and the 8oz. squeeze bottle.

Glue Spreader Accessory Kit “Had TroubleGetting Glue In The Right Spot Lately?”

These bottles are ideal for most any solution you usearound your shop or house. Great for glues, stains, fin-ishes and much more.

Refillable Bottles

ROUND BOTTLE W/ CAP KIT8 OZ #IM00003 ........$1.9916 OZ #IM00004 ........$2.49REPLACEMENT CAP #IM00229 ........$0.39

You can now put glue and epoxy exactly where youneed it. The injector set includes a 6cc, 15cc and30cc injector plus an accordion squeeze bottle. Thisis a great tool for furniture and antiques repairs.

4 PC GLUE INJECTOR SET#PA79409 ..........................$7.95

Glue CaddyHolds 3, 2 oz(oval) bottles and 2, 4or 8 oz(round) bottles (Glue not included)Pre-drilled for easy hanging.

GLUE CADDY /5 BOTTLE#CA00580 ....................$9.95

4 Piece Glue Injector Set

Apply glue faster and with less mess thanyou can imagine with this glue spreader.Theroller on the end of the glue bottle spreadsglue evenly on the edges of boards and onslightly irregular shapes.Simply open the“faucet” and glue runs evenly onto the rollerand therefore evenly onto your workpiece.The Glue Spreader from Klingspor’sWoodworking Shop saves you clean uptime as well. No more rags, no more fingers

covered with glue and no more messy bot-tles laying around your shop - just this con-venient, timesaving device. Your glue caneven be stored in this bottle because it has aplug that keeps it just as fresh as if it were inthe original bottle. Another plus is it savesglue and MONEY!

GLUE APPLICATOR WITH BRUSH#GA26000..........................$7.95

GLUE ROLLER BOTTLE#BH19044.. ....................$7.95

Glue Spreader Take The Mess Out of Spreading Glue

GLUE

86


GLUE

Glue application can be very messy and canaffect the final finish if you are not careful. Tomake this stage a little more easy, use thesedisposable glue brushes. The brush has a45/8" handle and a Chinese hog bristle stockmeasuring 1/2". Having a box of these gluebrushes in the shop is a must.

You’ve seen it and read about it - GorillaGlue. Gorilla Glue is more economical thanthe other glues in that it takes just 1/2 ounceto cover one square foot. That’s three to fourtimes the coverage of normal wood gluesand it’s stronger and more versatile.This is apolyurethane adhesive. That means it’s100% waterproof, 100% solvent-free, con-tains no fillers, is non-toxic when cured,requires no mixing and makes for easyclean-up. On top of these “technical” fea-tures, the part we like best is it doesn’t clogyour sandpaper, won’t dull your tools and isstainable.

This is the most durable gluingdevice that you’ll ever find. In addi-tion to it’s durability, the CentroGluer puts glue right where it’s

needed.We have tested this wonder-ful device and found that it keeps the

glue fresher longer.This gluer is made of a heavyduty rubber bulb with a galvanized steel head.Into the head screw the various glue dispersionunits - one for spreading glue for biscuit joineruse, one for doweling, one for precision glueplacement, one for general glue application and ahandy rubber roller attachment (not shown).

CENTRO GLUE KIT#CGB7329 ................$29.95GLUE BOTTLE ONLY#CGB7312 ................$19.95

The World’s MostDurable Glue Bottle Kit

GORILLA GLUE4 oz. #GG04020 ..........$8.958 oz. #GG08020 ........$13.95

18 oz. #GG18020 ........$20.95

Glue Brushes

144 per Box #B9015600..$24.95 48 per Box #B9015648 ....$9.95

Gorilla Glue Every Glue You’ve Ever Wanted - All In One Bottle!

Scraps of sandpaper can really add up in the dollar column.Don’t throw away those usable pieces —make discs or 1/4 or1/2 sheets for your PSA power tools. Use this simple sprayadhesive and in 5 minutes you’ll be ready to sand. A temporarybond is made between the disc and your backing pad thatmakes for easy removal of the disc with no transfer of glue.

SPRAYWAY DISC ADHESIVE - 11oz.#SW00066.................$9.95

Sprayway® Disc AdhesiveMake Your Own Sanding Discs

Glu-Bot Glue BottleThe Glu-Bot is the only glue bottle that will not drip or spill.TheGlu-Bot will put the glue where you want it... and only whereyou want it. Available in 16 and 4 oz. glue capacity, the easy-squeeze bottle features a unique two-chamber design thatpulls the glue back after squeezing to eliminate dripping.Thissame design allows the Glu-Bot to be the firstglue bottle to make vertical application easy andwithout drips. Glue level remains high evenwhen the bottle is running low. Both bottlesinclude blade and Yorker style tips.

16 OZ GLU BOT GLUE BOTTLE#FP90099 ...............................$6.95YORKER TIP 5 PK#FP90095 ...............................$1.49REPLACEMENT TIP 5PK#FP90096 ...............................$1.49

BABE-BOT 4 OZ GLUE BOTTLE#FP90100 ...............................$5.95BABE-BOT 4 OZ YORKER TIPS#FP90101 ............$1.49 - 5 PACKBABE-BOT 4 OZ BLADE TIPS#FP90102 ............$1.49 - 5 PACK

No Air Shipments!

This is the thickest, fastest drying glue available for use withporous and semi porous materials. It’s specifically formulated forfinish trim and carpentry. The glue’s thickness keeps it from run-ning and helps provide a strong initial tack and fast speed of set,yet allows realignment of working pieces.

TITEBOND MOLDING GLUE #FG02403..............$4.49

Franklin TitebondMolding Glue

Gorilla Epoxy

Formulated for darker wood, this dyed version of TitebondOriginal Wood Glue provides a strong initial tack and fast rate ofset up to help reduce clamp time.

TITEBOND DARK WOOD GLUE#FG03703....................................................$4.95

Franklin TitebondDark Wood Glue

Titebond Cold Press GlueTitebond Cold Press Glue is a high quality, economical alternativeto contact cement for large scale bonding of veneers to flat sur-faces. It is specifically formulated for cold press laminating ofwood to solid woods, particleboard, MDF, plywood and otherporous materials. It offers moderate speed of set, a translucentglue line and contains none of the harmful or corrosive fumes typ-ical of most contact cements. It also prevents bleed through onopen grained and unbacked wood veneers.

TITEBOND COLD PRESS GLUE - QT#FG05175 ................................$9.95

GORILLA QUICK CURE2 oz. #GG52012 ..........$4.95

GORILLA EPOXY SYRINGE25ML #GG25000 ..........$6.95

New Gorilla Quick Cure sets 8 times faster than the originalGorilla Glue. It’s ideal for repairs and projects that do notneed a lot of positioning time. Quick Cure has all the strengthqualities of the original Gorilla Glue.

Gorilla Quick Cure

Gorilla Epoxy is taking epoxy to the next level, the GorillaTough level. Gorilla's two-part epoxy is an Impact-ToughFormula, providing high impact resistance, strength andflexibility to handle the toughest projects. Plus, it's fast!Gorilla Epoxy sets in 5 minutes and can be handled in 90minutes. Gorilla Epoxy's gap-filling capabilities and all pur-pose formula easily bond steel, wood, aluminum, ceramicand much more. The most convenient feature of the newGorilla Epoxy is the separate barrel of resin and hardenerthat keep the epoxy from hardening, plus syringe dis-penses evenly and includes a cap for multiple uses.

87


GLUE

THIN• Fast setting. Penetrates wood quickly.• Use to bond hairline cracks - up to 1/64"• Use as a wipe on coating to harden and

seal wood surfaces.MEDIUM• Longer set time allows for more alignment

and assembly time.• Fill cracks up to 1/32".• General purpose adhesive.• Both thin and medium are ideal to use to

coat soft spalted wood, hardening the sur-face sufficiently to make cuts on your lathewithout tearing the grain.

• Stabilizes wood surfaces for sanding andfinishing.

THICK• Provides even more time for assembly and

alignment.• Good filling characteristics for larger cracks,

with still enough flow to penetrate the crackdepth.

• Adhering two porous materials together.GEL• A paste consistency.• Provides the longest assembly time and

greatest crack filling capabilities.• Ideal for assembling parts — adhesive will

not run off the surface at any angle.FLEXIBLE• A unique “Rubberized” CA adhesive with a

viscosity slightly higher than THICK• It has an extremely good bond strength that

retains a flexible condition when cured.• Ideal for bonding dissimilar materials such

as turned wood pens with metal inserts.• The bond will withstand high impact without

breakIng.• It is the most versatile of all CA formulas.

CA GLUE 2 OZ.THIN #CA00001..................$6.95MEDIUM #CA00015..................$6.95THICK #CA00002..................$6.95

CA GLUE 4 OZ.THIN #CA00030 ..............$11.95MEDIUM #CA00031 ..............$11.95THICK #CA00032 ..............$11.95

ACCELERATOR* (2 oz.)w/spray pump#CA00003 ....................................$3.95ACCELERATOR* (8 oz.) w/spray pump#CA00007 ....................................$7.95DEBONDER (2 oz.)#CA00004 ....................................$5.95GEL (20 gram tube)#CA00010 ....................................$5.95FLEXIBLE CA (1 oz.)#CA00024 ....................................$7.95CHANGE-A-TIP PAK (caps & tips)#CA00200 ....................................$2.95AEROSOL ACCELERATOR* (7 oz.)#CA00333 ....................................$7.95AEROSOL ACCELERATOR* (12 oz.)#CA00334 ....................................$9.95DISPENSE PAK (caps & tips)#CA00504 ....................................$3.95

FLEXIBLE CA ADHESIVE BLACK 1OZBlack CA glue is an alternative glue to usein decorative or gap filling applications. Insome cases it will eliminate the need tomix saw dust with your regular CA glue.#CA00011 ..............................$6.95

CA Quick-Setting Glues

WEATHER PROOF GLUE8 OZ #FG01413 ..........$6.95

16 OZ #FG01414 ........$9.95QUART #FG01415 ....$15.95

SYSTEM 3 EPOXY RESIN(QT)#SY00001 ................................$29.95

HARDENER PINT#1 FAST #SY00003................$22.95#2 MEDIUM #SY00005 ........$22.95

Titebond III is the most advanced wood glue available today. Itcombines strength, sandability, ease of use and water clean upof PVA glues with the durability, open time and water resistanceof polyurethanes. It has longer open times and is water proof.(Above waterline) It also resists heat, solvents and mildew.Great for any outdoor project.

The System 3 General Purpose Epoxy Resin & Hardener isthe workhorse of the System 3 resins fitting into 90% of allepoxy applications. It is a 100% solids, unfilled, medium-modulus epoxy system. It works well for new wood con-struction and repair, for gel coat blister repair, and for gener-al fiberglass boat repair. Use at a simple 2:1 ratio with anyof 3 hardeners. System 3 epoxy has excellent pot life andcure time control. Use at temperatures as low as 35˚ withno limitations on humidity. System 3 epoxy cures to a verytough, resilient, clear film.

Franklin Titebond III

General Purpose Epoxy Resin & Hardener

If you are in to doing things the authentic way, hideglue is the way to go. Hide glue has a slower set-ting time that allows you to avoid a hasty assem-bly.The other key benefit of hide glue is that it canbe taken apart. With a one quart capacity, the gluepot will hold the right amount of glue for most jobs.An approximate temperature of 140 degrees ismaintained and the pot will not burn the glue. Gluekettle removes for easy cleaning.

ELECTRIC GLUEPOT#EM11510 ...................$99.95

DRY GROUND HIDE GLUE -1LB #B94000255........$12.95

Electric Gluepot Melt Down Hide Glue

5 Minute Quick Cure 2 Part EpoxyQuick Cure is a highly developed quick setting "five minuteepoxy" system. Use for fast repairs to wood and fiberglassor to quickly assemble jewelry and other small items.Excellent for installing bungs, filling small staple holes, tackwelding wood parts together and all other small jobs thatrequire a rapid cure. Blend equal parts of A and B until mix-ture is one color and there are no streaks.

QUICK CURE 1/2 PINT#SY00013 ..............$19.95

QUICK CURE PINT#SY00014 ..............$32.95

T-88 is a high performance, non-brittle, two part epoxyadhesive designed to give superior results under adverseconditions. T-88 adhesive may be used without modifica-tion in normally fitted joints and will cure in any thicknesswithout shrinking. It cures to a clear amber in 6 to 9 hoursand becomes virtually invisible once varnished. Fullstrength is reached in 24 hours. T-88 will bond to virtuallyall surfaces except tin, zinc and some waxy thermoplas-tics. Once cured, the adhesive is unaffected by water,gasoline and most chemicals. Uncured mixture can becleaned with white vinegar and water.

T-88 EPOXY ADHESIVE-1/2 PINT#SY00015..........................$19.95

T-88 EPOXY ADHESIVE - PINT#SY00016..........................$29.95

Versatile 2 Part Epoxy Adhesive

The manufacturers of our CA glue have come out with their own2 part epoxy. It is a fast curing, two part, medium viscosity epoxythat easily mixes at room temperature.Stick Fast Epoxy is a waterresistant, low shrinkage, high performance industrial bonding sys-tem. It bonds to wood, metal, glass, phenolic plastics, ceramics,rubber and a wide variety of construction materials.

CLEAR 8OZ5 MINUTE EPOXY KIT#CA00318....................$12.95

20 MINUTE EPOXY KIT#CA00328....................$12.95

2 Part Epoxy Kits

* No Air Shipments!

No Air Shipments!

Ever wondered how you could clean up a nasty glue spill on yourworkpiece or take care of glue squeeze out without scraping or sand-ing? All woodworkers know that cleaning the glue off your project isalmost as dreadful a chore as sanding. It will quickly dull a scraper andclog sandpaper. Well, here’s the answer to this problem - De-GlueGoo. You’ll be amazed at how cleanly you can accomplish this taskwithout the chipping of wood that you normally associate with glueremoval. Works well on yellow glue, white glue, and hide glue. De-Glue Goo is also non-toxic, non-staining, fast, and all natural. We donot recommend that this be used for dismantling of furniture but isideal for the repair of furniture since it is amust to remove all of the old glue to get agood glue bond.

DE-GLUE GOO SOLVENT - 8oz.#KC10000 ......................$8.95

De-Glue Goo Solvent Dissolves Unwanted Glue

88


CLAMPS

This self squaring adjustable four corner clamp willclamp frames from 5" x 7" up to 26" x 30". All 4 clamppads are reversible to allow either gluing or nailing.

Picture Frame Clamp

PICTURE FRAME CLAMP#BH19635 ..................................$29.95

The small, lightweight band clamp features a 15’x 1" high-strength nylon webbing, 1000 lb test,which enables the perimeter clamping of irregu-lar shaped items. Positive hold is afforded by theself locking aluminum cam which also allowsinstant release. The band clamp comes with 4steel corners to help protect the nylon band fromsharp corners.

15' Band Clamp

15' BAND CLAMP #ACC1215 ..................................$16.95

The Bessey variable angle strap clamp has two dis-tinguishing features that separate it from other gener-ic strap clamps. First, the geared winder simultane-ously tightens both sides of the strap. Secondly, thebuilt-in rewinding mechanism keeps the straprolled up and out of the way. The 4 clamp padsthat come with the strap clamp can handle anyangle from 60 to 180 degrees.

23' Strap Clamp

23' STRAP CLAMP#AC05569 ....................$42.95

Both vertical and horizontal toggle clamps are ideal for various production clampingapplications as well as any number of custom jigs. All come with adjustable rubber pres-sure tips.

Toggle Clamps

Are you tired of using your level and C clamps to make a cuttingstraight edge? The All in One Edge Clamp will make the processfaster, easier and more accurate. Made from extruded aluminum,the clamps are durable and rigid. They have a built in T track ontheir top which lends them to use with any number of shop madejigs. The regular clamps are 13/4" wide and the 54" Ultra measures33/4" in width making it a much more durable and heavy duty clamp.

All In One Edge Clamp

A.B.

C.

D.

E. F.

A. 1/4 " VERTICAL TOGGLECLAMP #TGC-001 ............$9.95B. 5/16" VERTICAL TOGGLECLAMP #TGC-003 ..........$10.95C. VERTICAL TOGGLE CLAMP#TGC-005 ........................$19.95

D. 5/16" HORIZONTAL TOGGLECLAMP #TGC-007 ..........$10.95E. 3/8" HORIZONTAL TOGGLECLAMP #TGC-008 ..........$15.95F. PUSH/PULL TOGGLE#TGC-010 ........................$19.95

These Parallel Clamps from Jet featurestheir exclusive design that provides preci-sion and power with exact 90 degreeclamping up to 1000 lbs of pressure. Allnecessary clamping pressure is easilyapplied using the ergonomic, Sumogriphandles. They make tightening theclamps effortless. When it’s time torelease the clamp, it has a trigger thatallows you to easily slide the clamp apart.

Maybe the handiest feature on the clampis the built in measuring scale on the bar.This helps you get the clamps as close aspossible to the desired position withoutany guess work. Other features include areversing head, moveable rail stand/endstops and non marring jaw faces. Afterusing these clamps, you’ll see why theyhave become so popular.

JET PARALLEL CLAMPS1 2+

12" #J70412 ..........$33.95 ........$29.9524" #J70424 ..........$38.95 ........$34.9531" #J70431 ..........$43.95 ........$38.9540" #J70440 ..........$47.95 ........$39.9550" #J70450 ..........$51.95 ........$40.95JET FRAMING BLOCK SET - 4 PK#J70401 ..................................$15.95JET BENCH DOG SET - 2 PK#J70402 ....................................$8.95

KREG BENCH KLAMP #KRE-407 ..................$39.95KREG BENCH KLAMP INSERT PLATE #KRE-402 ..................$12.95

The Kreg Bench Klamp enables you tohave clamping areas anywhere on yourwork surface. It’s the perfect instant holddown for pocket hole assemblies, sand-ing, routing and many other applications.The best thing about the Bench Klamp iswhen you are done, the clamp lifts quick-ly out of the plate and you once againhave a completely flat work surface.Anywhere you can rout a 3" x 4" x 1/4"recess, you can have a Bench Klamp.Install extra insert plates and developyour own custom clamping station.

ALL IN ONE SINGLE CLAMP12.5" #ET12000..........$26.9524.5" #ET24000..........$29.95

36.5" #ET36000..........$34.9550.5" #ET50000..........$39.95

ALL IN ONE ULTRA CLAMP 54.5" #ET54000 ........$69.95ROUTER PLATE XRP #ET10000 ........................$24.95STOP BLOCK XSB #ET11000 ........................$14.95SAW PLATE XSP #ET11001 ...................... $24.95

Kreg Bench Klamp

Jet Parallel Clamp


89

PLANES & SCRAPERS


Cabinet scrapers are among the most useful tools inthe shop.Many woodworkers, however, have a difficulttime putting the optimum hook on the scraper. Thebiggest problem is determining the best angle andthen holding the burnisher at that desired angle. Thisvariable burnisher uses a carbide rod that adjustsfrom 0 to 15 degrees. An adjusting knob adjusts andholds the carbide bar at the desired angle.

Scrapers are an excellent way to work those difficult areas offigured or unusually grained wood. Crown offers a 3 piece setwhich contains a rectangular, kidney shaped andconcave/convex shape. Roll your burr and you’ll be ready toslice shavings with high quality Sheffield Steel scrapers.

One tool that should be standard in all work-shops is the scraper.The Sandvik scraper isno ordinary scraper. Having a blade made ofTungsten Carbide, the scraper stays sharp50 times longer than conventional metalblades. These carbide blades allow thescraper to be used on a variety of surfacesto remove glue, paint, varnish, rust or evenbare wood. Both scrapers have bladeswhich are slightly curved on the edges toprevent leaving gouges on the outside ofyour stroke. The 2.5" model has a reversibleblade giving you two edges and the 1" has a

Scrapers can produce an extremely smoothsurface much like a very fine grit of sandpa-per. They are most useful in areas aroundburls and figured areas of your workpiecethat could chip out. If you haven’t tried usinga scraper in your surface preparation, givethis scraper a try-you’ll be impressed. For afoolproof angle for scraping, try the scraperholder shown on this page. It’ll save yourworkpiece and your hands!

Scraper BurnisherSome types of lumber are best finished with ascraper, and a finely tuned scraper can finishthe wood better than anything else. Burled,curled and any other highly figured woods getthe smoothest when they are scraped.A few strokes with the high

speed steel burnisher and the scraper isready to go. The overall length of the scraperis 11 inches with the shaft measur-ing 3/8" by 51/2"

#CN00377 ........................$22.95

Anyone who has ever worked with ascraper knows that getting the correct“bend angle” is critical to the overall per-formance of the tool. Veritas, one of themost respected names in the woodworking

market, has made this aspect of scraperusage almost foolproof. The scrapermounts in the “holder/handle” and you tight-en the center screw to “bend” the scraper toits most effective angle.The Veritas ScraperHolder also takes the pressure off of yourfingers and hands so getting the advan-tages of a scraper doesn’t have to bepainful. If it sounds simple, it is! So orderyours today. Includes blade.

VERITAS SCRAPER HOLDER#VT53301 ......................$42.95

Finished Edge Scraper

Variable Burnisher w/ScraperDial in the Perfect Burnishing Angle

2.5" HEAVY DUTY SCRAPER(Model # 665)#SK66500 ..........................$29.952.5" Replacement Blades#SK45100 ..............................$10.951" MINI SCRAPER (Model #625) withHolster #SK62500 ..................$19.951" Replacement Blades#SK44900 ................................$8.95Pear Shaped Blade (Model #625) #SK62510 ................................$8.95Round Shaped Blade(Model #625) #SK62520..........$8.95Drop Shaped Blade (Model #625) #SK62530 ................................$8.95

3 PIECE CABINET SCRAPER SET#CN00376..............$16.95

3 Piece Cabinet Scraper SetChoose the Perfect Shape

Handled Scrapers Removes Glue, Paint,Varnish, Etc.triangle shaped blade giving three sharpedges and can be outfitted with 3 new dif-ferent shapes for detail work. Both scrap-ers have an aluminum diecast bladeholder and a molded plastic handle.

Veritas Scraper HolderSave Your Hands and Get the Perfect “Angle”

The handy Slickplane produces an exceptionallysmooth 1/8" radius or 45 degree chamfer over theentire length of an edge.The brass sole glides easilyalong the edge as two independently adjustable, car-bide tipped cutters apply the finishing touch.This is agreat tool to have around when you don’t feel like get-ting out the router.Comes standard with radius blade.

Slickplane Forget The Router For An Easy Radius Or Chamfer

SLICKPLANE#WK11000 ......$17.95

Radius Blade Set#WK11010 ........$8.95

Chamfer Blade Set#WK11020 ........$8.95

The Bailey brand has been a premiere name in handplanes for over a century. These planes are

still manufactured to the high standardsthat made them the preferred tool

woodworkers through the years.Each piece is accurately ground for aperfect fit and precision alignment of

the blade. The steel irons can easily behoned to a razor sharp long lasting edge.

BAILEY #4 SMOOTH PLANE2" X 93/4" #SW12904..................$59.95BAILEY #5 BENCH PLANE 2" X 14" #SW12905 ..................$56.95BAILEY BLOCK PLANE15/8" X 61/4" #SW12920 ..............$44.95

LOW ANGLE BLOCK PLANE13/8" X 61/4" (Shown)#SW12960 ..................................$42.95

Stanley Planes World Renowned and Time TestedThe old, reliable spoke shave isstill the preferred tool for shapingand smoothing irregular andcurved surfaces. Any type offreehand contour work is stillbest done with a spoke shave.Made of iron and with two fineadjustment screws, the spokeshave is sure to be a durablethat’s a pleasure to use. The 2"

Spokeshave Flat Base

FINISHED EDGE 21/2 X 6SCRAPER #SK47580 ........$8.95

10" BULLNOSE RABBET PLANE#SW12978 ......................$69.95

The larger Bullnose Rabbet plane has aone piece cast iron body and handle. Ithas 2 cutter positions, a rear for regularwork and a forward position for bullnosework. The rear position is fully adjustablefor precise depth adjustment. The planealso has a removable depth gauge, anadjustable fence that can be used oneither side of the plane and is fitted with aspur for work across the grain. Measures10" long and 11/2" wide.

10" Bullnose Stanley Rabbet Plane

BULLNOSE RABBET PLANE#SW12975 ....................................$34.95

The small rabbet plane is designed with the cut-ter at the front of the plane for close work into cor-ners. It’s a light weight and compact tool that’sideal for trimming and cleaning up rabbets. Thereis an adjustable mouth for both fine and coarsework. Measures 4" long and 11/8" wide

Bullnose Stanley Rabbet Plane

blade should be kept at a 25 degree angle. Theoverall tool length is 10".

SPOKESHAVE FLAT BASE#SW12951 ..................................$26.95

VARIABLE BURNISHER W/SCRAPER #VT53701......................$34.95

90


ORDER FORM

$7 99

PAGE # QUANTITY ITEM NUMBER DESCRIPTION SIZE GRIT UNIT PRICE EXTENDED PRICE

SUBTOTALShipping, Packing,

Insurance and Handling*

(Inquire for Next Day Deliveryand 2nd Day Delivery)

NC Customers Add Sales Tax

TOTAL

*Outside the USA, AK & HI Call for charges

xExpiration Date:

Card#

Signature As It Appears On The Card. (For Credit Card Orders ONLY!)

Payment Method (Sorry, No C.O.D.’s)

Check or Money Order Payable to: KLINGSPOR’S WOODWORKING SHOP

Mastercard American Express

Visa Discover

WAIT!!Don’t forget to:

• Provide a street address foraccurate delivery.

• Provide us with a daytimetelephone number.

• Check the accuracy of thepreprinted address and makecorrections as necessary.

• Enclose your check or money order,payable to Klingspor’s WoodworkingShop, or complete the credit cardinformation.

BILLING ADDRESS

Name ________________________________________________

Company Name (If Applicable.) ________________________________

Street Address/PO Box __________________________________

____________________________________________________

City __________________________________________________

State ________________________________________________

ZIP + 4 ______________________________________________

Phone # ______________________________________________

If your billing address is a P.O. Box, please provide a delivery address.

SHIPPING ADDRESS

Name ________________________________________________

Company Name (If Applicable.) ________________________________

Street Address ________________________________________

____________________________________________________

City __________________________________________________

State ________________________________________________

ZIP __________________________________________________

E-mail: Please send us your e-mail address and you will receiveour monthly e-zine “The Woodworker”

____________________________________________________

P.O. Box 3737, Hickory, North Carolina 28603-3737

Gift certificates make great giftsfor that special woodworking friend

or relative! Available in anydenomination.Your recipient’s nameis handwritten on an attractive gift

certificate. If ordering by mail,be sure to enclose a check

or credit card number for the totalamount of your gift.

Give someonespecial a useful gift...

a GiftCertificate!

Please provide your Key Code andCustomer # from the back cover

________________ ________________

CALL:Toll Free: 800-228-0000Local Customers:828-327-7263International Customers:001-828-327-7263

MAIL:Complete the handyorder form and mail toP.O. Box 3737,Hickory, NC28603-3737

FAX:Complete the order formand fax it to usToll Free 800-872-2005International Fax001-828-327-4634

ONLINE:Thousands of products areavailable online:www.woodworkingshop.com

91

INDEX


What Does KLINGSPOR'sWoodworking Shop Have to Offer?PRODUCT GUARANTEE Every product we sellcomes with our guarantee of quality. We guaranteeour products to perform as good or better than theproducts you are purchasing from another catalog.However, your satisfaction is the only judge. So if forany reason you are not completely satisfied with your order, call our CustomerService Department, Toll Free at 1-800-228-0000 or follow the detailed returninstructions included with your order. We also guarantee our prices to be compet-itive with industry standards. If you see a lower nationally advertised price on theexact item, please mail or fax it to us - we’ll match it!

QUALITY PRODUCTS We provide quality abrasiveproducts that basically sell themselves.KLINGSPOR supplies you, the customer, with thebest sandpaper in the business. Although sandpa-per discs, rolls, belts, & sheets are our speciality; wealso offer Dust Collection Supplies, Finishing Products, Power Tools, How-ToBooks, Sharpening Tools, Hand Sanding Products & much more.Even more prod-ucts can be found when you shop online: www.woodworkingshop.com

FAST SHIPPING & DELIVERY We're proud to offera flat rate shipping & handling charge within the con-tinental United States - unless the item is markedwith an additional *FREIGHT CHARGE price.To beable to continue to offer our flat rate shipping, we willuse different shipping methods at our discretion. When selecting a shippingmethod other than our Flat Rate ground options, the freight or shipping chargeswill calculate according to the selected shipper's guidelines and you will becharged for the additional handling charges. For Delivery outside of the continen-tal U.S., please Call 001-828-327-7263 or Fax 001-828-327-4634 or email [email protected] for the shipping charges. If you have provided uswith an email address, you will receive an email with the tracking number whenyour order ships. * Air orders received after 3:00pm Eastern Standard Time nor-mally ship the next business day.

CUSTOMER SERVICE Our friendly, knowledge-able Customer Service Representatives will gladlyassist you in placing your order, product information,return instructions, questions, suggestions or com-plaints you may have. These representatives areavailable to assist you 8:00 AM- 8:00 PM (EasternStandard Time). Orders may be placed 24 Hours A Day, 7 Days A Week.

Privacy PolicyOccasionally we make portions of our customer list available to carefully screenedcompanies that offer products and services we believe you may enjoy. If you donot want to receive those offers and/or information, please let us know by contact-ing us in writing at: Klingspor Corporation, PO Box 5069, Hickory, NC 28603-5069. Additionally, if you decide you no longer wish to receive our catalog, sendyour mailing label with your request to: Klingspor Corporation Mail List, P OBox 5069, Hickory, NC 28603-5069. If you would like to receive our catalog lessfrequently, let us know by sending us your mailing label with your request to:Klingspor Corporation Mail Frequency, PO Box 5069, Hickory, NC 28603-5069.

You can contact us at:P.O. Box 3737, Hickory, NC 28603-3737or Order 24 Hours a Day/7 Days a Week:

Toll Free 1-800-228-0000 • Toll Free Fax 1-800-872-2005INTERNATIONAL orders:

001-828-327-7263 • Fax 001-828-327-4634 e-mail: [email protected]: www.woodworkingshop.com

ABRASIVE ACCESSORIESSanding Blocks ..........................10Abrasive Cords & Tapes ............11Soft Hand Pads..........................11

APPAREL ......................................81

BARGAIN BOX ................................3

BELT SANDINGBox of Belts ..................................6Custom Sanding Belts ................7Classic Portable Belts ..................7Planer Belts ..................................8KLINGSPOR Gold Belts..............9Sanding Sticks..............................9Abrasive Cleaning Sticks ............9Graphite Rolls ..............................9

BLADESSaw Blades ................................36Dado Sets ..................................37Bandsaw Blades ........................38Jig Saw Blades ..........................38

BOOKS ..........................................29

BUFFING & POLISHINGPumice Stone, Rottenstone,Paraffin Oil & Felt Block ............15Buffs ............................................15Surbuf..........................................15

CARVINGWoodburning Kit ........................57Carving Knives ..........................57Flexible Shaft Motor Tool ..........58Whittling Kit ................................58Engraving Set ............................58

CLAMPSStrap Clamps..............................88Picture Frame Clamp ................88Parallel Clamps ..........................88Bench Clamp..............................88

CONTOUR SANDING & SHAPINGFlapwheels....................................4Mac Mops ....................................4Sanding Mops ..............................5Sanding Stars ..............................5

DETAIL SANDINGGuinevere System......................75Cone Points ................................76Drill Grinder ................................76Pen Sander ................................76Detail Sander..............................76

DISC SANDINGLightweight Discs ......................46Stearate AO Discs......................47Heavy Paper Discs ....................48AZ-Plus ......................................48KLINGSPOR Gold ....................49PSA Discs & Disc Rolls ............50Cloth Discs ................................50Discs for Lathe Sanding ............51Sponge Pads..............................52Scalloped Discs..........................52

DRILLINGPlug Cutters................................39Forstner Bits ..............................39Drill Bit Sets ................................39Kreg Jigs ....................................40Wood Screws ............................41Doweling Jig ..............................41

DRUM SANDINGSuperMax Tools..........................66

DUST COLLECTIONDust Collection Accessories......78Festool Dust Extractor ..............79Dust Collection Nozzle ..............79Dust Collector Bag ....................793 Speed Fine Air Filter ..............794" Floor Sweep Dust Hood........79

FEIN TOOLSFein Vacuums ............................78Fein Multimaster ........................77Triangle Replacement Discs......10

FINISHINGTack Cloth ..................................16Refinishing Gloves ....................16Varnish........................................17Stains ..........................................17Peel Away ..................................18Steel Wool ..................................18Box of Rags................................18Craftsman Polish ........................19Premium Brushes ......................19Kwick Kleen................................19Craftsman Polish ........................20Wood Filler & Putty ....................21Blendal Sticks ............................21Gel Stain ....................................22Water Soluble Dyes ..................22Old Fashioned Milk Paint ..........22Waxes ........................................23Salad Bowl FInish ......................23Oils ..............................................24Wipe On Polyurethane ..............25Shellac ........................................25Topcoats......................................25Aerosols......................................26Lacquer ......................................27Spray Guns ................................28

FLOOR SANDING ........................80

FOAM SANDINGUltraflex Sanding Pads ..............69Angled Sponges ........................69

GLUEKlingbond Glue ..........................85Glue Bottles/Spreaders..............85Cold Press Glue ........................86Gorilla Glue ................................86Disc Adhesive ............................86Quick Setting Glues ..................872 Part Epoxy ..............................87

HARDWARE ..................................80

MACHINE ACCESSORIESMobile Bases..............................42Bandsaw Fence..........................42Ceramic Cool Blocks..................42

MEASURING & LAYOUTCenter Rule ................................30Marking Gauge ..........................30Marking Knives ..........................30Scribers ......................................30Combination Square ..................30Measuring Tape..........................31Digital Fractional Caliper............31

METAL/TOOL PROTECTANTSSandflex Blocks..........................43Bullfrog Rust Remover ..............43TopCote ......................................43

POWER GRINDINGFlapdiscs ....................................63Carving Kits ................................63Power Wheels ............................63Power Carver..............................64

PUMP DRUMS & SLEEVESPump Sleeves ............................14Jet 1HP Buffer ............................14

ROLLSReady-to-Wrap Abrasives ........67Stearate Paper Rolls..................67Heavyweight Paper Rolls ..........67Hook & Loop Rolls ....................68Bargain Box of End Rolls ..........68KLINGSPOR GOLD ..................68Shop Rolls ..................................69

ROUTINGFeatherboards ............................32Router Jigs..................................32Pioneer Router Bits....................33Inlay Kits......................................33Sign Templates ..........................33Freud Router Bits ......................34Palm Router................................35Variable Speed Router ..............35Trend T4 Router ........................35

SAFETYSafety Glasses ..........................64Respirators ................................65Earmuffs ....................................65Earplugs......................................65Gloves ........................................65Dust Masks ................................65

SANDERSRandom Orbit ............................72Festool Sanders ........................73KLINGSPOR RandomOrbit Sander ..............................73Compact Belt Sander ................74Belt Sanders ..............................74Sheet Sanders............................74

SCRAPERSPlanes ........................................89Burnisher ....................................89Handled Scrapers ......................89

SHARPENINGWaterstones................................59Worksharp System ....................59Variable Speed Grinder ............60Grinding Jig ................................60Powerstrop..................................60ProEdge System........................61Tormek Super Grind System ....61Diamond Sharpening System ..62Hone Strop ................................62Shop Stop ..................................62

SHEET SANDINGStandard Sheets ........................12Garnet Sheets ............................13Kling-On® Sheets........................13Micro Mesh ................................13

SHOP HELPERSFloor Mat ....................................81Moisture Meters..........................82Metal Detector ............................82Magnetic Tool Bar ......................83Corner Chisels............................83Hold Down..................................83Roller Stand................................84Edge Trimmer ............................84Roller ..........................................84Veneer Softener ........................84Dovetail Saw ..............................84Gorilla Tape ................................84

SLEEVE SANDINGRotary Shaper ............................70Robo Sander ..............................70Spindle Sander ..........................70Quick Lock Sanding Drums ......71Mini Size Sanding Drum Kit ......71Sanding Sleeves ........................71

TABLE SAW HELPERSKREG Precision Miter Gauge ..44Mag Jig ......................................44Miter Gauge................................44Incra Miter Express ....................45Table Saw Inserts ......................45Push Stick ..................................45Featherboard ..............................45

TURNINGCrown Turning Tools ..................53Chucks........................................53Sorby Turning Tools....................54Pen Turning ................................55

PRSRT STDU.S. POSTAGE

PAIDKlingspor’s

Woodworking Shop"Quality Tools and Supplies for the Woodworker"Post Office Box 3737, Hickory, NC 28603-3737

STORE HOURS: Monday - Friday 9:00 - 6:00Saturday 9:00 - 5:00 • Sunday 1:00 - 5:00*

* Weekend hours may vary. Call your local store for times.

Due to changing demands in the woodworking industry, itemsand prices in this catalog supersede those previously adver-tised by Klingspor’s Woodworking Shop. We reserve theright to add and delete products to best suit the avid woodwork-er. Prices are subject to change without notice. All products areguaranteed by Klingspor’s Woodworking Shop.

THREE CONVENIENT LOCATIONS TO SERVE YOU

HICKORY, NC:856 21st. St. Dr. S.E., Hickory, NC 28602

(828) 326-WOOD (9663)

RALEIGH,NC:3141 Capital Blvd, Suite 110

Raleigh,NC 27604(919) 876-0707

WINSTON-SALEM, NC:532 Hanes Mall Blvd(Pavilions Shopping Center)

Winston-Salem, NC 27103(336) 768-WOOD (9663)

http://klingsporswoodworkingshop.blogspot.com/Get more information on woodworking.

Watch videos and learn!http://klingsporextra.blogspot.com/

Stay up to date. Learn about past shows.Join us - share your comments.

http://twitter.com/WoodworkingshopFollow us! Stay up to date.

©Klingspor’s Woodworking Shop 2009Klingspor’s Woodworking Shop is a productionof Klingspor Corporation Post Office Box 5069,Hickory, North Carolina 28603-5069

12" DIGITAL PROTRACTOR #IP35012..................$49.95

12" COMBINATION SQUARESET 4PC #IP34212................$49.95

12" DigitalProtractor

This combination set is great for the wood-worker and can be used for many differentpurposes and can replace many othersquares. It can layout 90,s, 45,s, be used asa depth gage, a height gage, a marking andscribing gage, a protractor, a plumb and aprecision ruler.

4 Piece 12"Combination Square

Our 12" Digital Protractor can be used for many applications.It will enable you to accurately set angles on everything frommiter gauges, table saw blades to miter saws. The magnetizedblades make it much easier to use when working on cast irontops. It is an excellent tool for those doing trim carpentry. Thedigital Protractor can be zeroed out at any point and can bechanged where you can read it from either end.

6" COMBINATION SQUAREW/ CENTER HEAD#IP34206..................................$34.95

4" DOUBLE SQUARE#IP34244..................................$12.95

KEY CODE

CUSTOMER NUMBER

Documents

Klingspor's Woodworking Shop Vol 122 Catalog