6
Kodak EasyShare C913 Capacitor Replacement How to remove and install the capacitor. Rédigé par: Alan Galarza Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28 ID de tutoriel : 3982 - © iFixit — CC BY-NC-SA fr.iFixit.com Page 1 de 6

Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

Kodak EasyShare C913 CapacitorReplacement

How to remove and install the capacitor.

Rédigé par: Alan Galarza

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 1 de 6

Page 2: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

INTRODUCTION

Use this guide to remove the capacitor.

OUTILS:Phillips #00 Screwdriver (1)

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 2 de 6

Page 3: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

Étape 1 — Batteries

Position the camera with the bottom facing up.

With your finger, slide the battery cover in the direction of open arrow.

The battery cover will spring open, so be careful to lift it up gently.

Étape 2 — Back Case

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

There are 2 on the left

There are 2 on the right

There are 3 on the bottom

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 3 de 6

Page 4: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

Étape 3

Firmly grasp and pull back casing off.

Étape 4 — Front Case

With battery door open, grasp the front case and remove it from the camera.

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 4 de 6

Page 5: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

Étape 5 — Capacitor

Orient the camera with the lens facing you.

Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the plastic bridge.

Lift the plastic bridge off and place it to the side.

Étape 6

Do not touch the capacitor contactpoints for any reason. This will resultin a severe shock.

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 5 de 6

Page 6: Kodak EasyShare C913 Capacitor Replacement · Étape 5 — Capacitor Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the

To reassemble your device, follow these instructions in reverse order.

Ce document a été généré pour la dernière fois le 2019-07-16 01:50:29 PM.

Étape 7

Grasp the capacitor, carefully remove it from its holder, and place it off to the side.

Étape 8

De-solder the connections at thebase of the capacitor

Kodak EasyShare C913 Capacitor Replacement Brouillon : 2014-01-28ID de tutoriel : 3982 -

© iFixit — CC BY-NC-SA fr.iFixit.com Page 6 de 6