Upload
sessionsg
View
531
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Ferrous Investment Castings
Citation preview
Lamothermic Corp.Represented by: Sessions Co., LLC
Investment Cast Parts
Founded 1975 42,000 sq. ft. facility in Brewster, NY Automated and semi-automated production
equipment Fully integrated ERP software Rapid Prototyping In-house engineering & machining
capability MIL-I 45208A
Lamothermic Corp.
Parts that are good candidates for Investment Casting:◦ Have complex geometry requiring extensive
machining or not possible to machine, also difficult or impossible to die cast
◦ Have very thin sections (down to .015”)◦ Have fine surface finishes ◦ Have close tolerances (.005” to .010” per inch)◦ Welded assemblies – combine into one part◦ Are between fractions of an ounce to 75 lbs.◦ Are medium to high volume production quantities
Why Investment Casting?
Comparison of processes
103
104
105
106
Low Medium High
QU
AN
TIT
Y
COMPLEXITY
PowderMetallurgy
Machining
Die Casting
MetalInjectionMolding
InvestmentCasting
Production Equipment:◦ 1 fully automated VA
Robotic Shelling system◦ 3 Mueller Phipps
automatic wax injectors◦ 5 MPI semi automatic
wax injectors◦ 1 Mueller Phipps wax
Stabilizer and distribution system
◦ 3 MPI manual injectors◦ 2 300lb Inductotherm
melting furnaces◦ Shell removal equipment
Materials:◦ Carbon Steel ◦ Low Alloy Steel◦ Stainless Steel◦ Tool Steel◦ Nickel Alloys◦ Cobalt Alloys◦ Copper Alloys.
Capabilities
Automatic Wax Injection
Automatic wax injection is used on production runs over two hundred pieces. Our three state of the art automatic wax injectors assure accurate and consistent quality patterns resulting from excellent equipment parameter controls.
Robotic Ceramic System
Our Robotic ceramic system is a fully integrated cell. The computer monitors and controls the Kawasaki robot, slurry mixers, rainfall sanders, and conveyer-drying chamber to ensure consistent quality and throughput. Energy, labor, and floor space is minimized in the production of precision ceramic shells.
Machining
We have six CNC machining centers in house that are supported by Virtual Gibbs Cam software.
In house capabilities include: ◦ Spectrographic Analysis◦ Radiographic Inspection {X-Ray}◦ Liquid penetrant inspection◦ magnetic particle inspection ◦ CMM Inspection◦ MIL-I 45208A
Quality
Quality
Coordinate Measuring Equipment Spectrographic Analysis
Aerospace Commercial Firearms Medical Military Power Generation
Industries served
Sample Parts
On-time delivery Stocking program available Competitive pricing MIL-I 45208A Materials certificates of compliance Experience with a wide range of materials
Lamothermic offers to its customers:
Lamothermic Precision Investment Casting Corp. www.lamothermic.com◦ Mr. Taylor Seymour◦ 391 Route 312◦ Brewster, NY 10509◦ Ph: (845) 278-6118◦ Fax: (845) 279-3716◦ E-mail: [email protected]
Sessions Co., LLC◦ Mr. George Sessions◦ PO Box 22901◦ Portland, OR 97269◦ Ph: 503-659-9958◦ Fax: 503-344-4631◦ E-mail: [email protected]
Contact information
Thank you!