Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
LAUFENIlBagnoalessI one FreestandIng BasIn 530
sPeCIFICatIonrecommended use Domestic, Hotel or Commercial
Material Fine Fire Clay
Finish LAUFEN Clean Coat
Colour White
Weight 43.6kg
Capacity 5.4 litres
taphole availability 0 or 1 taphole
Integrated overflow No
Plug & waste Suits 32 x 40mm non-overflow waste
(Not included)
Fixing Bolted to the Floor using fixing set supplied.
CleanIng reCoMMendatIons
To see the complete LAUFEN range go to www.reece.com.au/bathrooms
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
Dimensions are nominal measurements only.
The above dimensions are in millimetres.
page 1 of 8
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 2
185
900
135
530
530
>~30
0
LAUFENIlBagnoalessI one FreestandIng BasIn 530
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
sPare Parts
Parts list supplied by LAUFEN
900 mm265 mm
530 mm
530 mm
min. 300 mm
50 mm
120 mm
215 mm
207mm
40
15mm
15mm
15mm
15mm
15mm
mm
~270 mm
8.9818.4Pop Up Waste not included
not included
8.1197.2
8.9406.5
8.9280.6
8.7097.18.9461.1
Art. Nr. 8.1197.2
Preparation
EN 2
Parts list supplied by LAUFEN
900 mm
265 mm
530 mm
530 mm
min. 300 mm
50 mm
120 mm
215 mm
½ in½ in
207mm
40 mm
~270 mm
Ø 320 mm
185 mm
8.9818.4
1/2 in 1/2 in
1/2 in 1/2 in
not included
8.1197.2
8.9406.5
8.9280.6
8.7097.18.9461.1
Art. Nr. 8.1197.2
Preparation
EN 2
page 2 of 8page 2 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
Art. Nr. 8.1197.2
Assembly procedure
35 mm a
c
b
10 mm a
b
< 10 mm
50 mm
Ø 15 mm
Fastening material
For 1 Tap Hole version
EN 3
21
5 6
3
4
87
InstallatIon InstrUCtIons
note:For no taphole version where wall mount tapware is used, consideration to be made to heightpositions and length of outlet.
page 3 of 8page 3 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
Fig. 2: Parts required between waterless trap and 40mm PVC DWV in floor.
Fig. 1: Basin with waterless trap (provided) connection to 40mm trap adaptor (provided) through access cavity.
Fig. 3: Access under basin showing connection of flexible waste hose (provided) to 40mm PVC DWV in floor
40mm DWV PVC (not provided) to be cut and fitted by plumber
40mm pipe joiner
Please note: modified waste set up to suit Australian plumbing requirements
page 4 of 8page 4 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
9
a
b
b
b a
b
Use components as required by local plumbing regulator
Art. Nr. 8.1197.2
Assembly procedure
EN 4
10 11 12
15mm15mm
InstallatIon InstrUCtIons
10
1
a
b
(1/2 in) (1/2 in)
Use components as required by local plumbing regulator
Art. Nr. 8.1197.2
Assembly procedure
Fig: 1: Basin with waterless trap (provided) connection to 40 mm trap adaptor (provided)through access cavity
40mm pipe joiner
Fig: 2: Parts required between waterless trap and 40 mm PVC DWV in floor
40mm DWV PVC (not provided) to be cutand fitted by plumber
Fig. 3: Access under basin showing connectionof flexible waste hose (provided)to 40 mm PVC DWV in floor
Please note: modified waste set up to suit Australian plumbing requirements
LAUFEN IL BAGNO ALESSI ONE FREESTANDING BASIN 530
EN 4
11 12 13
page 5 of 8page 5 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
a
a
bb
< 10 mm 10 mm
20a19
16
30 s
1514
Art. Nr. 8.1197.2
Assembly procedure
EN 5
17 18
13
15mm
15mm
15mm
15mm
InstallatIon InstrUCtIons
page 6 of 8page 6 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
max. 5 Nm
20b
Art. Nr. 8.1197.2
Assembly procedure
b
a
22
2523
26
21
24
27
EN 6
InstallatIon InstrUCtIons
page 7 of 8page 7 of 8
LAUFENIlBagnoalessI one FreestandIng BasIn 530
Assembly procedure
a
b
a
b
28 29
Art. Nr. 8.1197.2
Maintenance instructions
The surface is simple to clean and care for. The smooth surface hardly accumulates any dirt. Use soft cloth, soapy solution and water for regular care. Wipe with a dry cloth. Avoid the use of abrasives or solvents, which damage the surface. Damage caused by inappropriate treatment by the user, is not covered by our guarantee.
Stripping down
EN 7
30
SILI
CONE
InstallatIon InstrUCtIons
page 8 of 8page 8 of 8