Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Project
Type
Date
Notes
Equivalent to 400W MH
Input Watts 101W
Lumens 11,522
Efficiency 114 lumens per watt
RFL4-LED103LED Floodlight
The RFL4-LED103 is a sleek, ruggedly designed, high efficiency floodlight. This LED flood has multiple mounting
options and accessories to suit a wide range of applications.
SPECIFICATIONS
ConstructionPrecision die cast aluminum housing with clear polycarbonate lens. Superior heat sink design with air-flow fins on the top and bottom to maximize fixture life.
LED configurationEach unit has three high efficiency Chips on Board (COBs) that delivers 11522 lumens. The LEDs have a colour temperature of 5000K as standard. 4000K, 3000K also available. The CRI is greater than 70 and the operating temperature range is -40°C to +40°C.
Beam DistributionNEMA 6H X 6V (wide) is standard. NEMA 3H X 3V (narrow) is available as an option.
ElectricalTotal system wattage of the unit is 101W. The standard unit has a high efficiency driver that operates at 120 - 277V. 347V driver also available as an option.
DIMENSIONS
MountingStandard unit is available with three mounting options: - Yoke mount - 4.53” Yoke with watertight connector. - Slip Fitter - fits on 2 3/8” tenon and can be bull horn mounted in various configurations. - Wall mount - complete with a wall bracket.Please contact us to learn more.
FinishStandard finish is Bronze. Please consult factory for custom colour.
AccessoriesVisor, Polycarbonate lens, Photocell, Wire Guard, Phillips Dynadimmer. Phillips Dynadimmer dims the fixture to 25% for 6 hours instead of operating at 100% at all times.
With optional Narrow beam (3X3)
Operating Temperature
-40°C – +40°C
Certification cULus, DLC, IP65 meets LM79, LM80
Warranty 5 Years
Colour Temperature
5000K (standard) 4000K (option) 3000K (option)
LED life 100,000 hours
Effective Projected Area (EPA Rating)
1.1 sq ft
Total Harmonic Distortion
10%
Power Factor 0.986
RAB DESIGN LIGHTING INC. 222 Islington Avenue, Toronto, ON M8V 3W7 • TEL. 416-252-9454 / 800-268-0381 • EMAIL. [email protected] RABDESIGN.CA
06 | 2015
APPLICATIONS
Ideal for building façades, sign lighting, area lighting, and wall washing in both commercial and industrial applications.
5YE
A
R WARRA
NT
YWE
T LO CATION
AP
PROVED FOR5Y
EA
R WARRA
NT
YWE
T LO CATION
AP
PROVED FOR
RFL4-LED103 LED Floodlight
OFSheet: 11
4.53in115.0mm
5.04in128.0mm
5.53in140.4mm
2.52in64.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195751
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
4.53in115.0mm
5.04in128.0mm
5.53in140.4mm
2.52in64.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195751
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
4.53in115.0mm
5.04in128.0mm
5.53in140.4mm
2.52in64.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195751
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
4.53in115.0mm
5.04in128.0mm
5.53in140.4mm
2.52in64.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195751
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
7.30in185.5mm
3.18in80.7mm
2.95in75.0mm
3.00in76.2mm
2.44in61.9mm
3.07in78.0mm
3.07in78.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195750
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 SLIP FIT
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
7.30in185.5mm
3.18in80.7mm
2.95in75.0mm
3.00in76.2mm
2.44in61.9mm
3.07in78.0mm
3.07in78.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195750
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 SLIP FIT
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
7.30in185.5mm
3.18in80.7mm
2.95in75.0mm
3.00in76.2mm
2.44in61.9mm
3.07in78.0mm
3.07in78.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195750
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 SLIP FIT
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
7.30in185.5mm
3.18in80.7mm
2.95in75.0mm
3.00in76.2mm
2.44in61.9mm
3.07in78.0mm
3.07in78.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195750
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 SLIP FIT
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
4.33in110.0mm
7.87in200.0mm
4.61in117.0mm
6.14in156.0mm
2.99in76.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWING
SEE INDIV. PARTS
DWG No.
AREV No.
Part No.
Material:
Description:
SEE INDIV. PARTSFinish:
Date:
Designed By:
Date: BIANCA J.
Drawn By:
Date:
Dwg.Approved.By:
RFL3-RFL4 WALL BRACKET
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
RAB DESIGN LIGHTING INC. 222 Islington Avenue, Toronto, ON M8V 3W7 • TEL. 416-252-9454 / 800-268-0381 • EMAIL. [email protected] RABDESIGN.CA
06 | 2015
ACCESSORIES
Polycarbonate lens, Wire guard, Visor
MOUNTING OPTIONS
Slipfitter, Yoke, Wall bracket
OFSheet: 11
15.08in383.1mm
3.94in100.0mm
8.78in223.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195924
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL4 ALUMINUM VISOR
ASize:
inch 1:4Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039OFSheet: 11
15.08in383.1mm
3.94in100.0mm
8.78in223.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195924
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL4 ALUMINUM VISOR
ASize:
inch 1:4Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
15.08in383.1mm
3.94in100.0mm
8.78in223.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195924
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL4 ALUMINUM VISOR
ASize:
inch 1:4Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
11.67in296.5mm
0.82in20.8mm
7.11in180.5mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWINGDWG No. REV No.
Part No.
Material:
Description:
195912
Finish:
Date:Designed By:
Date:BIANCA J.Drawn By:
Date:Dwg.Approved.By:
RFL3 WIRE GUARD
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
OFSheet: 11
7.15in181.5mm
11.68in296.6mm
0.12in3.0mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWING
Material <not specified>
DWG No.
REV No.
Part No.
Material:
Description:
Finish:
Date:
Designed By:
Date: BIANCA J.
Drawn By:
Date:
Dwg.Approved.By:
RFL3 PC LENS
ASize:
inch 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
Wire Guard
Polycarbonate lens
Visor
Slipfitter
Yoke
Wall bracket
RFL4-LED103 LED Floodlight
ORDERING GUIDE
Mounting Height 24 ftTilt 20°
Spacing ResultsSpacing 60 ftQuantity 1Tilt 155°
Calculation ResultsMinimum 0.0 fcAverage 1.3 fcMaximum 6.1 fcAve/Min N/AMax/Min N/APoint Spacing 6X6 ft
Design SummaryWall Width 60 ftWall Height 60 ftSetback from the wall 20 ft
PHOTOMETRIC DATA
POLE MOUNTING
RAB DESIGN LIGHTING INC. 222 Islington Avenue, Toronto, ON M8V 3W7 • TEL. 416-252-9454 / 800-268-0381 • EMAIL. [email protected] RABDESIGN.CA
06 | 2015
RFL4 – LED103 – – – – – –
VOLTAGE
B - 120 -
277V*
A - 120V
F - 277V
C - 347V
COLOUR TEMP
5K - 5000K*
4K - 4000K
3K - 3000K
BEAM
W - Wide (6X6)*
N - Narrow (3X3)
FINISH
BRZ - BRONZE*
CC - CUSTOM
COLOUR
MOUNTING
YK - Yoke*
SF - Slipfit*
WM - Wall Mount*
OPTIONS
V - Visor
WG - Wire Guard
PCL - Polycarbonate Lens
PCA - 120V Photocell**
PCF - 277V Photocell**
PCC - 347V Photocell**
* Standard configuration ** Chosen photocell option must be the same as voltage
WALL WASHING - GROUND LEVEL MOUNTING
Mounting Height 30 ftTilt 45°10X10 ft grid
WALL MOUNTING
120Ft
2.0 3.4 4.2 3.4 2.0 1.0 0.4 0.1 0.0
0.1 0.3 0.5 1.1 2.0 2.8 3.3 2.9 2.0 1.1 0.6 0.3 0.1
0.2 0.3 0.5 0.9 1.5 1.9 2.1 1.9 1.5 1.0 0.5 0.3 0.2
0.2 0.3 0.5 0.7 1.0 1.1 1.3 1.2 1.0 0.7 0.5 0.3 0.2
0.2 0.2 0.4 0.5 0.6 0.8 0.8 0.8 0.6 0.5 0.4 0.3 0.2
0.1 0.2 0.3 0.4 0.4 0.5 0.5 0.5 0.4 0.4 0.3 0.2 0.1
0.1 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.1
0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1
0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1
0.0 0.0 0.0 0.3 1.1 2.3 2.9 2.3 1.2 0.4 0.0 0.0 0.0
0.0 0.1 0.4 0.9
1 Fc0.5 Fc0.25 Fc