www.IndependenceLED.com

1 1 1

© 2012 Independence LED Lighting, LLC www.IndependenceLED.com All Rights Reserved

LED Training MODULE

Sales Kit for: Authorized LED Resellers Supplement to: Live Training Program Title: The LED Tube Sales Kit Sessions: January 2012 Series: v.01-12 Module: Tubes and Tools

www.IndependenceLED.com

2 2 2

3 Colors & Custom Options

Core Kit Materials: LED Tubes: 4’ Frosted 4’ 3500K 4’ 4300K 4’ 5500K 2’ Cut away “Import” for Comparison 2’ EAGLE Cut Away + 1’ Cut Away Drivers for each Tube with one wires to power cord.

www.IndependenceLED.com

3 3 3

Support Kit Materials: Light Meter External Driver interior Internal Driver Interior Ballast Tube Case Aluminum Printed Circuit Board with (8) 12” Light Engines

www.IndependenceLED.com

4 4 4

Sample: Clear vs. Frosted Tubes

Powered Down: 4’ 18W 3500K

Left Clear – Right Frosted

Powered Up: 4’ 18W 3500K

Left Clear – Right Frosted

www.IndependenceLED.com

5 5 5

Clip in Tabs for Ballast Cover Plate

TUBE for TUBE INSTALLATION: Multi-Tube Fixture shown here powered down with Lens Opened and Ballast Cover Plate removed for illustration.

Ballast Cover Plate: (Cross Section shown Here)

OFFICE LIGHTING

www.IndependenceLED.com

6 6 6

Authorized LED Reseller: TECH TIPS White Light: White light can be made by using a blue-emitting diode that excites a yellow-emitting phosphor. The combination of blue and yellow makes a white-emitting LED.

Color impact from Internal Drivers: Internal Drivers generate heat, and heat burns the phosphor on diodes turning it into a brownish yellow, thus reducing the “white” light output.

www.IndependenceLED.com

www.IndependenceLED.com

7 7 7

External LED Driver Costs: The Printed Circuit Board (PCB) Assemblies within External LED Drivers contain approximately $6 of components, while the complete packaged External LED Drivers may range, for certain tubes, from $15 to $20.

Internal LED Driver Costs: Internal Drivers cost less than External Drivers. Manufacturers with Internal Drivers gain margin but create significant disadvantages for end users. The heat from capacitors in Internal Drivers damages the phosphor coating, reducing both color quality and longevity.

Authorized LED Reseller: TECH TIPS

www.IndependenceLED.com

www.IndependenceLED.com

8 8 8

Heat is Trapped in an enclosed Tube Cavity vs.

Dissipated with our Deep Fin Heat Sink.

8

www.IndependenceLED.com

www.IndependenceLED.com

9 9 9

Authorized LED Resellers: See the other modules, files,

and installation photographs at: www.IndependenceLED.com/BootCamp

Welcome to the American Energy Revolution.