Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
The REGINA magnetic system consists of mainly three parts: Machined upper plastic track with magnets integrated underneath the track in order to create a magnetic attraction with stainless steel chains or steel pins of plastic chains running in the curve.
Machined lower plastic track to support the chain in the conveyor return part, jointed with the uppert part by stainless steelself-tappingscrews.Threadedbrassinserts(suppliedseparately)canbeinsertedlaterallytofixthecurvetotheconveyor. Return shoe guide.
BENEFITS
Features.
1
2
3
12
1
3Dimensions,fieldstrengthandpositionofthemagnetshavebeencarefullystudiedinordertogettheidealdistributionandstrengthofthemagneticfieldforsteel or plastic chains.
Magnetic field comparison.
Theoscillationamplitude“A”ofthemagneticfieldkeepsaroundtheaveragevalueandtheperiod“L”isreduced.TheresultisamagneticfieldoftheREGINAcurvesmuchmoreuniformthantheothermagneticcurves.
Verysmoothchainrunning,thankstotheoptimizedmagneticfieldwhichensuresthatallthechainskeepperfectlyflatincurve without lifting or pulsation effect. Reliablesystemduetotheconstantmagneticfieldduringthecurvelife. Curves easy to install, maintain and clean, just lift the chain when the conveyor is not running. Same magnetic curves for steel and plastic chains, allowing parts standardization with consequent costs reduction.
Example: Curve with 500 mm radius, N°4 tracks, 90° layout. MagneticfieldoftrackN°4
Angle a (°)
Magneticfield(mTesla)
mean valuemean value
LA
Regina magnetic curvesOther types of magnetic curves
Coding of Regina reference for the curves.
The curve MF01AAX/100 has the following features: suitable for 981M/880M K 3 1/4 or K 83.8 chains, N°1 track, 500 mm radius, 90° section,82mmheigth,100mmbasicwidth,noinfeedlength.Toidentifytherequestedcurve,seetheREFERENCETABLEforeachchain series and select the reference in the “single track”or “multi track” columns. Tocompletethecoding,insertthecorrectnumberandletterintheproperspace(“_”)accordingto“TABLE1”below. Example 1: Single track curve for 981M K 3 1/4 chain, 500 mm radius, 100 mm basic width, 100 mm infeed length. Referenceinthetable:MF01A_X/101.Fora90°section,thecorrespondingletteris“A”(TABLE1)andthecompletereferenceofthecurve will be MF01AAX/101 Example 2: Multi track curve for 981M K 3 1/4 chain, 500 mm radius, 85 mm transversal pitch, 111 mm basic width, 100 mm infeed length. Referenceinthetable:MF__A_Y/311.Fora45°section,thecorrespondingletteris“C”(TABLE1).SelectingN°4tracks,thecomplete reference of the curve will be: MF04ACY/311
TABLE 1 TABLE 2NUMBERS OF TRACKS
CURVE ANGLES - CODING15° 30° 45° 60° 75° 90°
01
02
03
04
05
06
07
08
F E C B L A
CHAIN TYPE Radius R (mm)
Transversal Pitch P (mm)
Basic Width B (mm)
Infeed Length L (mm)
Upper Part Height (mm)
Total Height H for single track (mm)
Reference for single track curve
Total Height H for multi track (mm)
Reference for multi track curveSeries Width
981MHD 981M880M RG
3 1/4”83,8 mm
50085
1000
27
82 MF01A_X/100 90 MF__A_Y/110100 90 MF01A_Y/101 90 MF__A_Y/111
111 100 90 MF01A_Y/301 90 MF__A_Y/31189 100 125 82 MF01A_X/102 82 MF__A_X/122
680 100 100 82 MF01D_X/101
750 85100 100 82 MF01E_X/101 90 MF__E_Y/111111 100 90 MF01E_Y/301 90 MF__E_Y/311
860 100 125 82 MF01F_X/102
1000100 0 82 MF01G_X/100
85 111 100 90 MF01G_Y/301 90 MF__G_Y/311981M
HD 981M880M RG
4 1/2”500 120 129 125
2790 MF01A_Y/402 90 MF__A_Y/442
610120 129 125 90 MF01C_Y/402 90 MF__C_Y/442117 129 0 90 MF01C_Y/400 90 MF__C_Y/450
981MHD 981MG 981M
7 1/2”610 196 214 125
2790 MF01C_Y/602 90 MF__C_Y/672
860 214 0 82 MF01F_X/6001000 214 0 82 MF01G_X/600
REFERENCE TABLES: selecttherequestedcurveincombinationwith“TABLE1”and“TABLE2”
REFERENCEEXAmpLE m F 01 A A X / 1 0 0
Chain type Number of tracks
Radius Angle Totalheight
Basicwidth
Transversal pitch
InfeedLength
CHAIN TYPE Radius R (mm)
Transversal Pitch P (mm)
Basic Width B (mm)
Infeed Length L (mm)
Upper Part Height (mm)
Total Height H for single track (mm)
Reference for single track curve
Total Height H for multi track (mm)
Reference for multi track curveSeries Width
HD 9857MHDG 9857M
882MHFX 882M
7 1/2”
610* 195 200 100
32
87 MH01C_W/501 95 MH__C_Z/561750 195 200 100 87 MH01E_W/501 95 MH__E_Z/561860 214 0 87 MH01F_W/600
1000 214 0 87 MH01G_W/600882M
HFX 882M10”
860290
0 32 87MH01F_W/L00
12” 340 MH01F_W/J00
CHAIN TYPE Radius R (mm)
Transversal Pitch P (mm)
Basic Width B (mm)
Infeed Length L (mm)
Upper Part Height (mm)
Total Height H for single track (mm)
Reference for single track curve
Total Height H for multi track (mm)
Reference for multi track curveSeries Width
LBP 882M7 1/2”
860214
0 32 95ML01F_Z/600
10” 290 ML01F_Z/L0012” 340 ML01F_Z/J00
CHAIN TYPE Radius R (mm)
Transversal Pitch P (mm)
Basic Width B (mm)
Infeed Length L (mm)
Upper Part Height (mm)
Total Height H for single track (mm)
Reference for single track curve
Total Height H for multi track (mm)
Reference for multi track curveSeries Width
782M783M 83,8 mm
500 85100
0
27
82 MM01A_X/100 90 MM__A_Y/110100 90 MM01A_Y/101 90 MM__A_Y/111
111 100 90 MM01A_Y/301 90 MM__A_Y/311
750 85100 100 90 MM01E_Y/101 90 MM__E_Y/111111 100 90 MM01E_Y/301 90 MM__E_Y/311
1000 85 100 0 90 MM01G_Y/100 90 MM__G_Y/110
CHAIN TYPE Radius R (mm)
Transversal Pitch P (mm)
Basic Width B (mm)
Infeed Length L (mm)
Upper Part Height (mm)
Total Height H for single track (mm)
Reference for single track curve
Total Height H for multi track (mm)
Reference for multi track curveSeries Width
793M83,8 mm
500 85100
0
27
82 MU01A_X/100 90 MU__A_Y/110100 90 MU01A_Y/111 90 MU__A_Y/111
111 100 90 MU01A_Y/301 90 MU__A_Y/311750 85 100 100 90 MU01E_Y/101 90 MU__E_Y/111
1000 85 100 0 82 MU01G_Y/100 90 MU__G_Y/1104 1/2” 500 120 129 125 27 90 MU01A_Y/402 90 MU__A_Y/442
On request, Magnetic curves with different dimensions than standard can be supplied. PleasespecifyalltherequestedparametersfillingtheformbelowandcontacttheReginasalesoffices.
CHAIN SERIES REqUESTED CURVE PARAMETERS
CHAIN WIDTH: mm inches °
FIRST RADIUS R:
CURVE ANGLE a:
N° OF TRACKS:
TRANSVERSAL PITCH P:
BASIC WIDTH B:
TOTAL WIDTH W:
INFEED LENGTH L:
*Suitable for chains 882M - HFX 882M only
The REGINA magnetic curves (upper part) are available in the following materials, according to any application need:
CURVE MATERIAL FEATURES CHAIN TYPE APPLICATIONS
SUPREME - A
Ultra high molecular weight polyethylene
(about 7 milion gr/mole) with good wear
resistance and low coefficient of friction
For steel and plastic chainsIdeal for low/medium speed
applications in dry or lubricated conditions
SUPREME - L
High grade of ultra high molecular weight polyethylene (about 7 -9 milion
gr/mole) with optimum wear and abrasion resistance, combinated with advanced lubricant for excellent
gliding properties
For steel and plastic chainsSuitable for medium/high
speed applications in dry or reduced lubricated conditions
SUPREME - S
Special high grade and oil-filledpolyamide, with superior abrasion
resistance and extremely high PV limit.Dry running only
For plastic chainsSuitable for high speed
applications in dry running conditions
PV LIMIT
100%
80%
60%
40%
20%
0%
SUPREME - A SUPREME - L SUPREME - S
The return part of the curve and the shoe guide are made of UHMWPE with 4 milions gr/mole, that exceeds the most demanding applications.
Test condition: 70 m/min chain speed, dry running
FRANCE
REgiNA iNdustRiE s.a.r.l.Z.A.C. des Chatelliers
34 Rue des Frères Lumière45800 saint Jean de Braye - France
tel. +33 238 836363Fax +33 238 836413
uNitEd KiNgdOM
REgiNA iNtERNAtiONAL LiMitEdunit 1, dyneley Road,
greenbank Business ParkWhitebirk, Blackburn,
Lancs BB1 3AB - united Kingdomtel. +44 1254 661116Fax +44 1254 59456
sPAiN
CAdENAs REgiNA EsPAÑA, s.L.Calle industria, 37
08120 La Liagosta - Barcelona - Españatel. +34 93 5742838Fax +34 93 5740735
usA
REgiNA usA, iNC.305 E. Mahn Court
Oak Creek, Wi 53154 - usAtel. 001 414 5710032Fax 001 414 5710225
CHiNA
REgiNA tiANJiN CHAiN & BELt CO., Ltd.Xi Qing Economic development Area,
Xiang Rui Road n. 17tian Xiang industrial Zone300385 tian Jin - Chinatel. +86 22 83961223Fax +86 22 83961202
gERMANY
REgiNAtel. +49 2662939196Fax +49 2662939198
tHE NEtHERLANds
REgiNAtel. +31 610681114
itALY
REgiNA CAtENE CALiBRAtE s.p.A.HEAd OFFiCE:Via Monza, 90
23870 Cernusco Lombardone (LC) - italytel. +39 039 99801
Fax +39 039 [email protected]
MEXiCO
REgiNA de MEXiCO s.A. de C.V.Av. Aviación 5051-28
Col. san Juan de Ocotan45019 Zapopan, Jalisco – Mexico
tel. +52 33 3627 4043Fax +52 33 3627 3930
ARgENtiNA
REgiNA iNtERNAtiONAL s.A.diagonal 190,
1788-1655 Josè Leon suarez Prov. Buenos Aires – Argentina
tel. +54 11 47296667Fax +54 11 47203210
© C
opyr
ight
Reg
ina
2014
V/L
EA
F05M
-14E