Lenze Applikation Knowledge Base http://akb.lenze.de/AKB-englisch/infopool.nsf/html/top-inhalt

1 de 1 17/05/2013 9:16

Dynamischer Navigator für beide Browser http://akb.lenze.de/AKB-englisch/infopool.nsf/html/Knowledge-Base-Ansichten

1 de 1 17/05/2013 9:16

Downloads Home

GSD/GSE files for Lenze Profibus-DP communication modulesHeadline

Description:The Profibus-DP GSD files available in this download enable all Lenze communication modules to be integrated in different Profibus-DP configuration softwares (e. g. Step7). Corresponding files for the AIF and FIF interfaces, as well as the communication modules of the 9400 and 8400 devices can be downloaded. The following table showsthe GSD files made available for download:

module designation designation in the filename S7 hardware-configurator

MC-PBS L-Force Controller Lenz0A12.gse

Servo Inverter 9400:E94AYCPM E94AYCPM Lenz07A8.gse

Frequency Inverter 8400:E84AYCPM E84AYCPM Lenz0A89.gsd (gse)8400motec Motec E84DGFCPxyzu LACT0CB3.gsd (gse)8400protec E84DGYCP Lenze84d.gsd(gse)

IO SystensIO-1000:EPM-S120 EPM-S120 LE010C3A.gsd (gse)

IP20:EPM-T120 EPM-T120 LENZ0A68.gsdEPM-T121 EPM-T121 LENZ0A69.gsd

EMF 213x communication Moduls:EMF 2130 IB 2130(4900/8600/9200) L_ar0082.gsd (gse)

EMF 2131 IB 2131(8200/9300) L_ar00AA.gsd (gse)EMF 2133 IB 2133(8200/9300) Lenz2133.gsd (gse)EMF 2133 IB (DP-V1) 2133(8200/9300) Len_2133.gsd (gse)

Frequency Inverter 82vec-motec:E82ZAFPCxxx Profibus-DP 8200neu-Profibus-DP Lenz00DA.gsd (gse)

E82ZAFPC201 Profibus-DP I/O E82ZAFPC2xx Lenz081B.gsd (gse)

GSD/GSE files for Lenze Profibus-DP communication modules (Downloads) http://akb.lenze.de/AKB-englisch/infopool.nsf/html/D43C8E90B108FC02C1256F8C003CDA49?Ope...

1 de 2 17/05/2013 9:16

Motor starter LCUELCAMxxx ELCAMxxx Lenz0951.gsd (gse)

System requirements:Independent from the used PLC and profibus master hardware the GSD/GSE files describe conforming to the Lenze communication modules. According to the used PLCand profibus master hard- and software these files must be integrated in the corresponding configuration software.

Software installation:Unpack the ZIP-file in any directory of your PC and integrate the GSD/GSE files according to the used profibus-DP configuration software. When you use the Siemens STEP7 software the files will be installed by the software 'Hardware configuration', menu Extras and 'Install new GSE file...'.

Download:GSD_GSE_V2_8.zip (1,451 MB): GSD/GSE files for Lenze profibus-DP communication modules version 2.8

Profibus user organisation:http://www.profibus.com

Software/Device Descriptions/Profibus - GSDSearch tree

Configuration, Field_busKey words

-- general --Industry

-- no specification --Application

Device descriptionTopic

200412329Doc-ID

08.04.2013Last update

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.

Imprint - Privacy policy - Software licencing and contractual conditions Feedback - Bookmark - Print - New entry - Deutschsprachiger Beitrag - Back

GSD/GSE files for Lenze Profibus-DP communication modules (Downloads) http://akb.lenze.de/AKB-englisch/infopool.nsf/html/D43C8E90B108FC02C1256F8C003CDA49?Ope...

2 de 2 17/05/2013 9:16