7/29/2019 Lo - Lift - Ibu Pejabat
1/1
MAJLIS AMANAH RAKYAT
(MARA)
No. Pesanan Kerajaan Jadual Pesanan Alatan bil Tawaran : PG
GIATMARA : WISMA GIATMARA, IBU P
BIL NAMA ALAT & SPESIFIKASI KUANTITI MODEL (BUATAN)
MAINTENANCE & SERVICE OF ONE 1 OF OTIS LIFTAT WISMA GIATMARA
( Re : JKKP Defects - Revised )
Description of Work
To Supply and replace :-
1 Engineering cost to design, custom made and install car
locking device 1 pc
c/w necessary accessories, wirings and testing &
commissioning
2 Supply labour, tools and materials to install Emergency
Batteries Operated 1 pc
Power Supply (EBOPS) c/w necessary wirings and testing &
commissioning
3 To relocate lift pit lighting and stop switch from bottom
landing door raise up 1.5 meters 1 lot
4 To install earthling cable or coupler strip at trunkings and
traction motor 1 lot
5 To supply and install fire extinguisher at lift motor room
(Co2) 1 pc
GIATMARA : GIATMARA ALOR SETAR
BIL NAMA ALAT & SPESIFIKASI KUANTITI MODEL (BUATAN)
2SEWING MACHINE HIGH SPEED 1 NEEDLE LOCKSTITCH BUTTON
1 UNIT JUKI LBH-781
HOLDING MACHINE
(Mesin Jahit Lubang Butang 1 Jarum)
Sewing Speed : Max. 3600 s.p.m
Needle Bar Stroke : 34.6 mm (1-23/64")
Needle : DP X 5 # 11, # 14
Number Of Stitches : Adjustable from 54 to 345
Stitches by changing the gears.
Lift of work clamp check : Max. 12mm (15/32")
Knife : Rear knife system (In case of thread break the
safety device is activated to stop the knife )
Sewing Hook : DP type special rotary hook
(Automatically Lubricated )
Driving system : One belt is used. Two steep speed
Change automatic stop motion system.
Lubricating system : Fully automatic lubricationMotor : Single
Phase Induction Motor (300w)
Table formica with one drawer
Stand industrial power fitted with rubber roller
Tempoh Jaminan : 1 Tahun
GIATMARA : GIATMARA ALOR SETAR
BIL NAMA ALAT & SPESIFIKASI KUANTITI MODEL (BUATAN)
3 HIGH SPEED SINGLE THREAD CHAINSTITCH 1 UNIT JUKI MB 1377BUTTON
SEWING MACHINE
(Mesin Jahit Butang)
Tread triming mechanism :
The triming mechnism that the tread is trimmed by themoving
knife and the fixed knife under the throat plate.
Tread : Thick cotton thread, synthelic, etc. to the
thickness # 20
Needle : Organ TQ X 7 # 20 (#18)
Singer - 175 x 1 # 048
Sewing Speed : 1500 s.p.m
Number of Stitches : 8, 15, 32 or 6, 12, 24
( according to each subclass )
Feed Length : lengthwise 0, 2.5 - 6.5 mm
Crosswise 2.5 - 6.5 mm
N.B Feed length must be adjusted according to each
attechmeet which is sultable to each button size.
Kinds of buttons which these machine can sew.
2 and 4 hole flat buttons, wrapped around buttons, withwith stay
buttons, shank buttong, snaps, metal buttons,
metal buttons with stay button label.
Buttons size : 10 to 28 mm daimeter
Needle bar and stroke : 48.6 mm Thread take
stroke : 48.6 mm
Button clamp lifting system : Automatic system
(pedal type possible )
Sewing system : single thread chainstitch
stop - motion mechanism :
Automatic stop motion mechanism (equipped with
the speed decreasing device and the reverse
rotation preventing devise)
Motor : 2000 w (1/4 HP ) Single Phase Induction
Table formica with one drawer
Stand industrial power fitted with rubber roller
Tempoh Jaminan : 1 Tahun
Nama Syarikat : C-ELEVATOR TECHNOLOGY (M) SDN. BHD.
Nama Syarikat : AMALTEX TRADING
Nama Syarikat : AMALTEX TRADING
