Since its inception in 2006, Alphalink has made a niche for itself in the market due to its dedication to support the customers, both logistically and technically. This has enabled the company to grow and expand into related activities in mainly in the field of communications. Over the years, Alphalink has expanded its scope of activities supplies a range of products including testing and measurement equipments and all the hardware requirements for cable installations sector. It also supplies and supports a range of optical communications and radio transmission products. We also have the capability and resources to take up turnkey projects in the areas of network monitoring and communication systems in mines and tunnels. Besides this, we have partnered with Electrorent Corporation, to offer a wide range of test equipments in the field of telecommunications on a rental basis. We have also established a service centre in Dubai, which caters to the calibration and servicing requirements for a range of test equipments. We have grown over the last few years due to our high level of customer retention. Some of the features on which the foundation of our business is based are:

Customer TrainingAlphalink has an excellent inhouse training centre in Dubai, equipped with highly skilled staff, where training is imparted to its customers on the various test equipments and cable laying machines. Technical training is provided directly by Alphalink to all customers.

Customer SupportAlphalink is ideally positioned to provide rapid response technical support to all its customers from its offices in UAE and QATAR. With a fully trained support team, any queries or problems that might occur can usually be resolved directly by us.

AffordabilityWe suggest products to our customers depending on the application as well as the

budget of the customer. Of all the major suppliers into the Middle East market, Alphalink prides itself to be one of the most cost effective solution provider. We never compromise on quality, offer an excellent product range and an instant response to customer needs at a price that will make you reconsider the value of any existing supplier you may have.

LogisticsAlphalink maintains a good stock level of a wide range of test equipments and cable laying equipment. This enables us to cater to the immediate requirements of many customers.

QualityAlphalink has a unflinching commitment to quality which is never compromised. Before supplying any product into the market, we have systems in place to ensure its suitability in the market, both in terms of quality as well as application.

Service CentreAlphalink has established an excellent service centre in Dubai offering calibration and repair services of a range of optical test equipments to the customers in the region. The main reason behind this move was to offer a better level of quality, reliability, and support to our customer base along with a considerable reduction in the downtime. We also recognise that through this, we can build strong and interactive relationships with clients, partners and suppliers. We believe that peace of mind stems from hardware reliability, software performance and quality of the products. However, we also recognise that in the real world when things do go wrong, downtime is to be kept to a minimum by our dedicated pool of in-house service engineers giving support service.

About us

Contents Page no

1. Fiber Optic Test Equipments .................................................................................................. 41.1 OTDR/iOLM ................................................................................................................................................................. 41.2. Light source/Power meter & Multi function Loss Test OLTS ..................................................................... 41.3. Live Fiber Identifier/Tone Generator ................................................................................................................. 41.4. Fiber Inspection Probe ........................................................................................................................................... 41.5. Visual Fault Locator ................................................................................................................................................ 41.6. High Bandwidth Testers ........................................................................................................................................ 4

2. Transport and Datacom .......................................................................................................... 52.1. Ethernet Testers ........................................................................................................................................................ 52.2. SDH Analyzer ............................................................................................................................................................. 5

3. 2G, 3G, LTE protocol analyzers ............................................................................................... 6

4. Solutions: Monitoring System/Service Assurance ............................................................... 64.1 NQMS Fiber ................................................................................................................................................................ 64.2 Node iOLM ................................................................................................................................................................. 64.3 Converged Service Assurance ............................................................................................................................. 6

5. Ideal ......................................................................................................................................... 7

6. Measurement technology for OFC and Component manufacturing industry .................. 8

7 . Transmission Equipment ........................................................................................................ 9

8. Ericsson .................................................................................................................................. 10

9. Optical Fiber Fusion Splicers and Cleavers ......................................................................... 11

10. Cable Blowing Machines and Feeders ................................................................................. 1210.1. Cable Blowing Machines ..................................................................................................................................... 1210.2. Cables Laying Equipments ................................................................................................................................. 13

11. Fiber Optic Cable And Cable Assemblies ............................................................................ 13

12. OPGW cable and accessories ............................................................................................... 15

13. Cable Trailers and Other Installation Accessories (TWS/Vetter/Plumettaz) .................... 1613.1. Cable Drum Trailers ............................................................................................................................................... 1613.2. Cable Drum Handling ........................................................................................................................................... 1613.3. Fiber Glass Rodding System ............................................................................................................................... 1613.4. Rollers ......................................................................................................................................................................... 1613.5. Winches ..................................................................................................................................................................... 1713.6. Cable Grips ............................................................................................................................................................... 1813.7. Cable Duct Equipments and Lubricants ........................................................................................................ 1813.8. Pre Fabricated Manholes, Chambers and HDPE Ducts ............................................................................ 18

14. Tools, Accessories And Consumables .................................................................................. 19

4

iOLM: Intelligent Optical Link Mapper

Using automated multipulse acquisitions and advanced algorithms, the iOLM is an OTDR based application that delivers detailed information on every element of the link, in a single button operation providing maximum intelligence and simplicity for expert level link characterization of FTTx/PON MDU , Point to point,. LAN/WAN, Metro code /Long –haul, CWDM networks.

ModulesUltra-Long-Haul OTDRLAN/

WAN Access OTDR

Metro/Long-Haul OTDR

Metro/CWDM OTDR

PON FTTx/MDU OTDR

FTB-500FTB-2

FOT-930

FTB-1

1.1 OTDR/iOLMLeading the optical time-domain reflectometer (OTDR) market with the broadest OTDR portfolio, with numerous singlemode and multimode configuration available at several wavelengths (1310/1490/1550/1625/850/1300nm).

1. Fiber Optic Test Equipments

1.2. Light source/Power meter & Multi function Loss Test OLTSWide range of stabilized light source and power meters to meet the specific requirements of customers. The key to success is choosing the right gear for the need.

OLTS: Combines a powerful light source, power meter, visual fault locator, full duplex digital talk set and a video fiber inspection probe. High resolution colour display and nine hours autonomy Ideal fortesting FTTx-based cable TV, POTS and high speed data services.

1.3. Live Fiber Identifier/Tone GeneratorEnables technicians to identify a specific live fiber without having to disconnect it and above all without

having to guess.

1.4. Fiber Inspection ProbeHighly versatile probe to detect dirty/damaged

connectors with unparalleled precision.

1.5. Visual Fault Locator Straight forward solution for identifying breaks, bends, faulty connectors or splices, as well as other causes of signal loss.

1.6. HIGH BAND WIDTH TESTERSCD/PMD/Optical Spectrum Analyzer: to characterize CWDM and DWDM networks.

Polarization mode dispersion (PMD) and chromatic dispersion (CD) measurements for all types of networks, Covers DWDM applications and all channel spacing’s, from 50GHz DWDM to CWDM. Fast and accurate DWDM network commissioning and high speed networking up to 40 Gbit/s WDM-Aware technology: per-channel optimized setup for accurate results all the time.

5

Modules Gigabit Ethernet Test Module Fully integrated test solution for performance assessment of Ethernet transport networks.10 Gigabit Ethernet Test Module Offers performance assurance for Ethernet based services, supporting 10 Gigabit Ethernet WAN and LAN rates for total network testing. Provides all the T&M functionalities required to verify service level agreement (SLA) conformity.10 Gigabit Next-Generation Multiservice Test Modules SONET/SDH, OTN, Ethernet and Fiber Channel test functions in the industry’s smallest and most efficient form factor. A new standard in multiservice field testing. 100G/40G Ethernet and OTN testing solution: 100G/40G Ethernet fully compliant with IEEE 802.3ba standard and OTU4/OTU3 as per ITU-T G.709—all in single module.

2.2. SDH Analyzer

Platform based Ethernet TestersWhether you require 10Mbits/s or 10Gbits/s or 40G/100G testing, or something in between, we offer a complete portfolio of test modules in handheld and compact, portable platforms to address your specific needs.

Platform based SDH AnalyzerWhether you require SONET/SDH, DSn/PDH or multiservice test sets, EXFO offers a complete portfolio of modules in compact, portable platforms to address your specific needs.

Modules 40/43 Gigabit SONET/SDH Test Module Provides advanced SONET/SDH and OTN test functions at 40/43 Gbit/s transmission rate.10 Gigabit Next-Generation Multiservice Test Modules SONET/SDH, OTN, Ethernet and Fiber Channel test functions in the industry’s smallest and most efficient form factor. A new standard in multiservice field testing.10 Gigabit Next Generation SONET/SDH Test Module Provide advanced DSn/PDH, SONET/SDH, next generation SONET/SDH and OTN test functions in a single unit, eliminating the need for multiple purpose-built test platforms when commissioning or troubleshooting SONET/SDH, OTN and new data-aware SONET/SDH circuits.

2.5 Gigabit SONET/SDH Test Module: Combines advanced DSn/PDH and SONET/SDH test functions, ideal for the commissioning or troubleshooting of T1/E1 to OC48/STM-16 circuits. Offers extensive DSn, SONET, PDH and SDH features to perform a wide range of tests from simple bit-error-rate (BER) analysis to more advancednetwork characterization and troubleshooting.DSn/PDH and SONET/SDH Electrical Test Module Supports DSn, PDH, SONET andSDH electrical rates up to 155 Mbit/s. Ideally suited for TDM field service deployment and maintenance activities.

2. Transport and Datacom 2.1. Ethernet Testers

6

4.1 NQMS FiberUnique RFTS test method for reference data management, 24/7 detection, location and tracking of fiber degradations, Web-based element management system (EMS) and remote test unit (RTU), Comprehensive monitoring and reporting capabilities, Fault-on-map feature with GIS-based network documentation.

4.2 Node iOLM: FTTx line quality assessment solution from the node.

4.3 Converged Service AssuranceThe Brix System is a seamlessly integrated hardware and software solution that delivers end-to-end quality of service (QoS) and quality of experience (QoE) visibility and real-time IP service monitoring and verification for the world’s most demanding networks.

VoIP Call Performance Analysis Software – BrixCall

Next-Generation Service Assurance Software – BrixNGN

IPTV Service Assurance Software – BrixVision

3. 2G, 3G, LTE Protocol Analyzers

4. Solutions: Monitoring System/Service Assurance

Soft Hawk - which is a PC based software analyzer for Ethernet based interfaces.

Travel Hawk - The only Multi-technology Portable Protocol Analyzer Ideally Suited for Network Troubleshooting in the Field with Multi-interface support: STM-1/OC-3 (also channelized),STM-4/OC-12, E1/T1/J1 (PCM, ATM, IMA modes), as well as 10/100 Mbit and 1/10 Gbit Ethernet interfaces.

Power Hawk - It is a Multi user Analyzer solution with location independent access.

Portbale iPros - Intelligent Network Analysis Probe High-performance capture unit for multiple 10/100 Mbit/s, 1 Gbit/s or 10 Gbit/s Ethernet links.

7

IDEAL INDUSTRIES NETWORKS range of hand held test devices offer a comprehensive range of active and passive network test capability from basic cabling faults through to network monitoring,PC diagnostics and VoIP QoS amongst many others. This range delivers easy to use, high performance test and troubleshooting capability in LAN, WLAN and VLAN networks over copper,fibre and WiFi ensuring minimum downtime and saving money. Alphalink is the value added reseller of its products and solutions in the region.

• Certifies twisted pair cabling to TIA/ISO standards• Cat 3 to Cat 7/7A and Class C to FA• 10 Mb/s to 40 Gb/s certification• Certifies multi-mode and single mode fibre (optional)• Generates professional reports with included software

CABLE VERIFIERS - VDV II SERIES• Measures cable length• Provides distance to fault (TDR)• Identifies wiring errors instantly• Determines services running: ISDN, PBX and PoE• RJ-11, RJ-12, RJ-45 and COAX ports

5. Ideal

8

Photon KineticsProvider of measurement Technology to the supplier optical transmission systems, Network Monitoring and field Test Equipment. World Leader in Automated testing Solutions for optical fiber, cable manufacturing and R & D. Supplier of Industry Standard cleaving technology to manufacturers of High performance optical fibers and components.

6. Measurement Technology for OFC and Component Manufacturing Industry

Products1000 OTDR Automation System

1000i OTDR Automation System

1001 Multiple Fiber Handler

1100 Single Fiber Aligner

1120 Bare Fiber Aligner

1200 Automated Fiber Handler

2200 Series Optical Fiber Analysis Systems

2201 Far Field Scanner

2400 Fiber Geometry System

2402 Stand-Alone Dark Field Coating Geometry System

2411 Fiber Curl Measurement System

2440 Launch Analyzer

2500 Optical Fiber Analysis System

2500 Plastic Optical Fiber Analysis System

2600 Plastic Optical Fiber Preform Analyzer

2600 Preform Analyzer

2800 Strain / Dispersion Measurement System

2850 Precision Chromatic Dispersion Measurement System

7600/8XX OEM OTDR Systems

8000 Plastic Optical Fiber OTDR

8000 Production and Laboratory OTDR

8000i In-Process Test OTDR

FK11 Fiber Optic Cleaver

FK12 Fiber Optic Angled Cleaver

OASYS.net OTDR Automation Software

P104 Preform Analyzer

S14 Refractive Index Profiler

S14 Refractive Index Profiler for Plastic Optical Fibers

9

OTN Systems is the leading supplier of networking products for critical infrastructure worldwide. The company is the designer and supplier of the Open Transport Network (OTN) and XTran (eXcellence in Transport)

OTN / OMSOTN (Open Transport Network) is a unique system that can integrate virtually all existing applications for voice, data, LAN, video, SCADA, etc. into one high speed network, using a fiber optic backbone. The OTN product range is simple to install, configure and maintain. The user-friendly OTN Network Management System (OMS) provides a point and click graphical user interface by which the network administrator can configure and monitor the network. This reduces the required maintenance budget and allows network administrators to manage the network after only a few days of training.

XTran / TXCareThe new XTran product line is the first electricity substation and railway-grade communications network based on MPLS-TP technology (Multi Protocol Label Switching-Transport Profile). XTran is a fanless, compact and DIN rail mountable modular node family which can seamlessly interconnect all applications over fiber and copper cabling in various topologies.

EkinopsEkinops is a provider of next-generation optical transport solutions for service providers and privatenetworks. Its carrier-grade solutions leverage expertise in 10G, 40G, and 100G transmission, aggregation and Forward Error Correction (FEC) to allow operators to cost-effectively increase datatransport capacity over dark fiber, CWDM, DWDM, SONET/SDH, IP/Ethernet and SAN networks.Alphalink partners with Ekinops for its projects in the region.

7. Transmission Equipment

10

Ericsson is a leading supplier of Telecom system, The products include NGN Transmission system, Microwave radios, DWDM, SDH and MPLS-TP products.

Point to Point Microwave links either for the backbone or backup network. The Microwave links are offered in traditional frequency bands, as well as, in newer bands (V- and E-bands). The nodes are compact, of high capacity with optional high power and cost effective.

Optical transmission system that integrates virtually all existing applications for voice, data, LAN, video, SCADA, etc, into one high speed network, using a fiber optic backbone. Backbone transmission can be SDH, MPLS-TP etc. Long haul CWDM and DWDM networks that can aggregate or transport any Ethernet, Fibre Channel, SDH client protocol from 100Mb to 100G.

8. Ericsson

SPO 1460

Mini Link SP 420 SPO 1410

11

CleaversThe FC-6 is a traditional bench top cleaver, simple and easy to use. It is available with or without an off-cut col-lector. The FC-7 is a one step handy cleaver, originally designed for aerial splicing work. All FC-7 cleavers have an off-cut collector inside the cleaver body. FC-6RS have a large and practical off-cut collector. Fiber off-cut collection is fully automatic on FC-6RS, FC-7R cleavers can make 24000 cleaves without needing any blade adjustment. FC-7’s ergonomic design gives easy hand held operation when there’s no bench top.

Type-71c Single Fiber Fusion SplicerField proven core aligning splicer: Compact , light weight, fast, Durable, rugged, IP 52 compliant, Full touch screen control, remote upgrades and support, with 7 sec ultra fast splicing/28 sec ultra fast heating time.

Type 71M 12 Ribbon Fiber Fusion SplicerMass fusion splicer for up to 12 core fiber ribbons. Fiber holders with 3 Trizact for extra grip. Two ovens means no more delays waiting for shrinking sleeves. Large screen for clear display of all fibers. Tough clear shield permanently protects the display.

9. Optical Fiber Fusion Splicers and Cleavers

FC-6RS FC-6M-C FC-7R-F FC-7M-F8

Fiber Optic ClosureWide range of closures for different types of fiber optic cables both underground or aerial.

SumitomoThe T-55 Automatic adaptive core splicing machine features a Touch screen display, detachable case for working tray. It is quick and can produce a splice in 7S with a heating time of 20s.

12

Cablejet -P01The CableJet® is designed for blowing or floating tele-communication cables (optical fiber, coax or multipair) in preinstalled ducts. For cables 9 to 18 mm and for ducts OD 20 to 63 mm. Description as per technical characteristics N° 298.061-E.

Superjet -P01The SuperJet® is designed for blowing or floating tele-communication cables (optical fiber, coax or multipair) in preinstalled ducts. For cables 14 to 28 mm and for ducts OD 20 to 63 mm. Description as per technical characteristics N° 298.018-E.

10. Cable Blowing Machines and Feeders

Snake-Eye FTTH RobotThe worlds first robot for the expansion of Fiber Optic Network (FTTH).

• Makes passing through T or X duct junction possible without civil engineering

• Its steerable and rotational abilities allow the head to avoid obstacles• Could be used as an inspection camera for ducts up to 150m• A battery power pack makes it autonomous and environment friendly

Minijet -H01The MiniJet® is designed for blowing or floating tele-communication cables (optical fiber, coax or multipair) in pre-installed ducts. For cables Ø 4 to 16 mm and ducts OD 7 to 42 mm (other sizes, please consult us). Description as per technical characteristics N° 298.261-E.

10.1. Cable Blowing Machines

Microjet -PRM-196The MicroJet® is designed for blowing or floating telecommunication micro-cables (optical fiber, coax or multipair) in pre-installed ducts. For fiber units and micro-cables Ø 1 to 8 mm and ducts OD 3 to 14 mm. Description as per technical characteristics N° 298.267-E.

13

Optical Fiber CablesWe offer a complete range of terrestrial fiber optic cables for a variety of applications in telecommunications networks. The Product range includes the following both SINGLE MODE as well as MULTIMODE cable which are used depending on the application. In addition to the above, we also offer a wide range of cables depending on the installation. The range includes the following:1. Duct cables for both indoor and outdoor applications2. Direct buried cables3. Aerial Cables including figure 8 cables4. Tight buffered cablesIn addition to the above, we could also assist you in arriving at the optimum design for your cabling needs depending on your requirements and conditions due to our technical expertise on the subject.

Patch CordsFiber optic patch cord is one of most commonly used components in fiber optic network. They are used for linking the equipment and components in the fiber optic network. They are of various types depending on the connectors used. Some of the types of connectors are SC, ST, FC, LC, E2000 & MTRJ. Typical fiber optic patch cord cable diameter can be 0.9mm, 2mm, or 3mm. Depending on the network and application, we supply single mode and multimode patch cords.

PigtailsFiber pigtail is a piece of fiber optic cable with only one fiber optic connector on one side of the cable typically used to link the fiber optic cable with fiber optic equipment while the other side of the pigtail is spliced to the fiber usually inside an ODF unit. Depending on the application they can be single mode and multimode fiber optic pigtails. Pigtails are further classified depending on the connectors used. Some of the different types are SC, FC, ST, LC, MTRJ, E2000, etc.

Adaptors and connectorsFiber optic adapters are also called mating sleeves. They are used to connect optical connectors of same type, such as FC, SC and ST. Optical adapters are widely used in light distribution frame (ODF), the optical fiber communications equipment, the test equipments and so on. Our range of connectors provide reliable solutions for fiber connections and are fully comparable with the products from other suppliers in the market. We also supply Hybrid Adaptors.

11. Fiber Optic Cable and Cable Assemblies Your Optical Fiber Solutions Partner™

10.2. Cables Laying Equipments

Cable feeder DF 6The cable feeder is a hydraulic machine designed for laying cables in manholes and narrow conditions used together with a winch or in cascade. The extra pushing force allows an optimal transportation with a greater security. Maximum feeding or pushing force: 6kN (600kg). Admitted cable Ø : 25 -130 mm. Description as per technical characteristics N° 298.257E.

14

Optical Distribution Frame and Fiber Optic Patch PanelsOptical distribution frame is a fiber optic management unit used to organize the fiber optic cable connection frame. It is usually used indoors and comes in a wide range of sizes depending on the number of connections needed. The optical distribution frames are of modular design with sliding type trays inside and these ODF could be pre-installed with various kinds of fiber optic adapters and pigtails. The optical distribution frame is with standard 19 inch size and it is properly designed to control the bend radius of the cable inside the enclosure to avoid extra optical loss. We supply a wide range of ODFs from 12f onwards.

FTTX ProductsOFS’ family of bend-optimized solutions include AllWave® FLEX Fiber, the industry’s first bend-insensitive zero water peak single-mode fiber, and EZ-Bend™ Optical Technology, that enables ultra bend-insensitive cable.

Features:• 4.8 or 3.0 mm diameter ruggedized simplex cordage• Less than 0.1 dB macrobending attenuation at 1550

nm for 1 turn at 5 mm fiber bend radius• Solid construction fiber with macrobending

performance far better than ITU G.657B requirements• Backward compatible with installed G.652D fibers• Conform to UL® Riser and Plenum fire ratings• Compliant with Telcordia 409 & ICEA S-85-596

requirements• Featuring EZ-Bend Optical Technology, a breakthrough

developed by OFS Labs

Benefits:• “Copper-like”installationprocess: Can be routed

around corners using familiar copper wire practices• Faster,easierinstallation: no extra steps to install

bend limiters,conduits, or raceways

• Compact installation and storage: Conforms to building; slack fits in small storage spaces

• Fast,easy, low losssplicing to G.652D fiber with existing core and clad aligned splice equipment

• Familiar, standard connector termination: Solid fiber construction can be terminated using standard optical connectors and polishing techniques

• Familiar connector endface cleaning using same process as with existing G.652 solid construction fiber

• MDUandin-homeoptimized: Ideal for in-residence wiring and difficult installation routes in MDU overbuilds

• Greener Solution: Free of heavy metals and RoHS-compliant; solution uses less total materials and energy than copper solutions

Bend Insensitive Drop Cables EZ-Bend™ Optical Cables help speed and simplify indoor optical drop cable installations using breakthrough technology pioneered by OFS. They can be routed around corners and stapled* using traditional fast and easy copper wire installation practices, with negligible signal loss. Ideal for aggressive routing environments where space is at a premium, EZ-Bend Cables offer reliable support forMDU drop and in-homewiring applications, and can support great-quality high-definition television (HDTV), on-demand video, ultra high speed data, voice, online gaming and many other revenue-generating services.

The EZ-Bend Optical Technology can provide up to a 100-fold improvement in bending performance over conventional single-mode fiber (SMF) optical cables, to help avoid service disruptions and lower installation costs. Conventional optical fiber technologies require large bend radii to function properly, complicating the installation process.The EZ-Bend Technology enables in-residence optical cable installation with the same simple practices used for copper or coaxial cables. Cables using EZ-Bend Technology can be stapled in place using existing copper cable installation tools and routed around corners.

15

Suzhou Furukawa Power Optic Cable Co., Ltd. (SFPOC) is a joint venture between Furukawa Electric Co., Ltd. (FEC) and Etern Group Co., Ltd. with the controlling share of SFPOC is held by the FEC in Japan. SFPOC specializes in OPGW design, manufacturing, sales, accessories, technical support, installation training and comprehensive after service. Suzhou Furukawa Power Optic Cable Company (SFPOC) has been manufacturing OPGW in its state of the art modern factory near Shanghai since 2002. The company of Furukawa that manufactures optical fiber is known as OFS which was earlier known as AT&T/Lucent fiber. OFS fiber is used in OPGW manufactured by its sister company SFPOC.

SFPOC strictly implements QC system in accordance with ISO9001-2008 and Environment management system in accordance with ISO14001-2004. SFPOC makes OPGW meeting the most stringent quality standards and it is testimony of this that almost 50% of the cables manufactured by them cater to international markets. Having successfully made inroads into the USA, Canadian and Australian markets, SFPOC are also focusing on the Middle East market where they have already successfully executed a few projects recently. With a total worldwide supply record of 58,000 km of OPGW, SFPOC continues its expansion giving its high quality and advanced technology. The current capacity of SFPOC is 18,000 kms per annum. New products and technologies are being developed to manufacture cables with better performance such as dual tube (SUS+AL) based OPGW and trapezoidal shaped OPGW.

SFPOC can deliver OPGW cables within the usual reasonable lead time without any disruption in our operations. SFPOC uses stainless steel optical tube which provides high degree of fiber excess length and strain margin. This enables the OPGW to withstand high tension without any stress and strain on the fibers. Various designs of OPGW cable offered by SFPOC have been type tested according to the IEEE and IEC specification.

In SFPOC, OPGW is custom designed based on the specific requirement of each project. The manufacturing unit has the capability to manufacture OPGW of upto 144 fibres.

12. OPGW Cable and Accessories

EZ Bend Cable AssembliesThe robust, leading-edge EZ-Bend Assemblies offer all the advantages of bend-insensitive EZ-Bend Cables plus the benefits ts of factory-tuned termination. OFS’ EZ-Bend Assemblies allow for customization (i.e, cable diameter and construction, cable length, and termination type) and help save time and money on installation. Their innovative design can conquer sharp corners, moldings, and stapling, and provide an ideal solution for MDU and in-home wiring applications where space is at a premium.

16

13.1. Cable Drum TrailersCable drum trailers of different capacities to meet customer requirements.

13.2. Cable Drum HandlingCable Drum Bars and Locking Collars can be used not only on our jacks but for use on any cabling application, whether that be a Spindle (specially cut) for your Cable Drum Trailer or standard replacement Spindle for various jack stands currently in your fleet. Designed for cable dispensing from contractors vehicles and off the floor. Drum Lift Frame is suitable for a range of Drum diameters upto 1600mm. Particularly useful in cable yards, the frame is simply rolled into position.

13.4. Rollers• DuctRollers• CableRollers• CableandPipeRollers• ManholeEntryrollers• BendRollers

13. Cable Trailers and Other Installation Accessories

13.3. Fiber Glass Rodding SystemContinuous pipe and duct rodding systems (often referred to as Cobras, conduit snakes, duct rods or conduit rods) give a compact and labor saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with cctv cameras.

17

13.5. Winches

We provide optimum winches of varying capacities depending on site task requirements for both underground and overhead line constructions.

The Heavy Duty WinchDesigned for overhead line construction and replacement, for medium voltage conductors.Pulling force: 15kN. Hydraulic loading of drum. Variable speed 0-100 m/min.

The Pole Mounted WinchDesigned for light overhead line construction such as communication, fiber optic, energy.

The Twin Capstan WinchesDesigned to pull underground tele communications and power cables and sub ducts, weighing up to 1 to 10 tons.

18

13.6. Cable GripsCable grips (also often referred to as cable stockings, pulling socks) are a quick and efficient way to install/control electrical cables. Cable grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity.

13.8. Pre Fabricated Manholes, Chambers and HDPE Ducts A highly successful family of preformed underground access chambers, vaults, manholes, hand holes and underground boxes for buried network, duct and equipment access. The range provides operators with a means of constructing chambers quickly and inexpensively, without having to compromise on build quality.

13.7. Cable Duct Equipments and Lubricants

19

Fiber Optic Connector CleanerCleaner for SC, FC, ST and LC connector types.

Kevlar Cutter• Cut/break the jacket and glass fiber with the

Breaker-Notch • Trim the Kevlar aramid strength member with the

fine serrated edges of the tool

Clean CoreThe Clean Core cassette is supplied with a removable cartridge containing the cleaning fabric. The cartridge supports 400 cleaning cycles.

14. Tools, Accessories and Consumables

Buffer tube + Outer jacket stripperThe black outer jacket stripper has a range from 4.8mm to 8.0mm which is perfect for cutting the outer jacket of the break-out or fan-out cable.

Miller StripperThis tool is specially designed for stripping 250um buffer coating, 900um and hard buffer material.

Cable Sheath CutterIt is an ideal tool in cable sheath slitting for both divided and undivided cables.

Launch FiberTo avoid Dead Zone in Fiber.

Round Cable StripperThis precise stripper is designed for stripping round cable from 4.5mm to 25mm in diameter. The adjustable blade allows cutting depth up to 4.5mm, even strong protective outer jacket can simply be stripped off.

ALT

-DS-

01 O

ctob

er 2

015

A Perfect Rental Solution for your network testing requirements.

Rental Partner

• TelecomTestEquipment/Solutions

• TransmissionEquipment

• FiberOpticFusionSplicer

• CableInstallationEquipment

• FiberOptic/TelecomCable

• OPGWCableandAccessories

• FiberOpticCleaningAccessories

DubaiP.O. Box: 73729Tel: +971 4 338 3922 Fax: +971 4 338 7324

Abu DhabiP.O. Box: 76539Tel: +971 2 622 7774 Fax: +971 2 622 7779

QatarP.O. Box : 82584Tel : +974 4 464 4902Fax : +974 4 412 9260

E-mail: info@alphalinktech.com • www.alphalinktech.com

Your Optical Fiber Solutions Partner™