Upload
vutuyen
View
245
Download
2
Embed Size (px)
Citation preview
PROVIDING LEADING-EDGE ALUMINIUM CAST PLATE SOLUTIONS
alimex Produktinformationalimex Product Information
Qualität, Flexibilität, Wissen, Erfahrung, Leistung: Lösungen in Aluminium Gussplatten.
Quality, Flexibility, Knowledge, Experience, Excellence:Solutions in Aluminium Cast Plates.
ACP 5080 4-5
ACP 5080R 6-7
ACP 5080 GIANT / ACP 5080R GIANT 8-9
ACP 5080MF 10-11
ACP 5080S / ACP 5080RS 12-13
ACP 6000 14-15
PLANAL 5083 / 6082 / 7075 16-19
WALZMATERIAL 5083 / 6082 / 7075 20 ROLLED MATERIAL 5083 / 6082 / 7075
LUFTFAHRT MATERIAL 21-22 AVIATION MATERIAL
CNC-Komponenten-Fertigung 23 CNC-Components-Production
Contents
Inhalt
Wer mehr erreichen will, muss genauer hinsehen. Dieses
Credo gilt bei alimex seit jeher; zum einen für die Aufmerk-
samkeit, die wir unseren Kunden entgegenbringen, zum
anderen für die Sorgfalt, mit der wir unser Sortiment an
Aluminium-Gussplatten optimieren und weiterentwickeln.
Die außergewöhnlich hohe Qualität unseres Kernmateri-
als sowie der Oberflächengüte zeigt sich bei der weiteren
Bearbeitung. Das Potential der dort liegenden Wettbewerbs-
vorteile für unsere Kunden kennen wir genau: Auf Wunsch
sind wir in der Lage höchst anspruchsvolle CNC Komponen-
ten - vor allem im Bereich des Prototypenbaus - im eigenen
Hause zu fertigen. Diese Erfahrungswerte ermöglichen es
uns auf Augenhöhe mit unseren Kunden über die enormen
Möglichkeiten unseres Materials zu kommunizieren. So sind
unsere Produkte untrennbar mit kompetenter technischer
Beratung und exzellentem Service verbunden.
Als international aufgestelltes Familienunternehmen sehen
wir darüber hinaus die Nähe – und wie wichtig sie in der
Ferne ist. Aus diesem Grund stellen wir mit einem welt-
weiten Netzwerk aus Schwestergesellschaften und ausge-
wählten Handelspartnern die zuverlässige Versorgung mit
unserem Material sicher; wo auch immer die geschäftliche
Entwicklung unsere Kunden hinführt.
So schaffen wir es täglich für unsere Kunden mehr zu bewe-
gen – über Kulturen, Länder und Kontinente hinaus…
If you want to achieve more, you have to seek, understand,
plan and execute excellence. This has always been our
credo at alimex; create and execute a customer service
philosophy and strategy that emphasises product deve-
lopment, product improvement, and excellence in overall
customer experience.
The exceptionally high quality of our materials’ core struc-
ture as well as the excellence of our materials’ surface
condition become an asset to our customers, realized
during further processing of our materials and equating to
value added cost savings for the customer. Our knowledge,
gathered from experience from our state-of-the-art CNC
Division, enables us to illustrate and communicate the
enormous value added and cost saving possibilities our
materials offer to customers and end-users.
Being a proud family run corporation, we pride ourselves
on our position as a major manufacturer, processor, and
distributor in the global aluminium cast plate market. With
our global footprint and a strong and aggressive distributor
and trade partnership program worldwide, we can assure
customers and end-users alike a reliable and seamless
global material supply chain solution.
In that way we manage to make a bigger difference for
our customers every day – beyond cultures, countries, and
continents…
Seeking. Understanding. Achieving Excellence.
Mehr sehen. Mehr verstehen. Mehr bewegen.
3
ACP 5080 ist eine spannungsarme Präzisionsgussplatte mit sehr ausgewogenen mecha-
nischen Eigenschaften. Das feinkörnige und porenarme Aluminium-Gussgefüge wird durch
eine ausgedehnte Wärmebehandlung homogenisiert und thermisch entspannt. Die Form-
stabilität bleibt optimal erhalten. Die Besonderheit von ACP 5080 liegt in der beidseitig
feinstgefrästen Oberfläche. Jede Platte wird abschließend kontrolliert und beidseitig mit
einer Schutzfolie versehen.
High precision aluminium cast plate, ACP 5080, is precision surface machined on both
sides to industry leading close tolerance standards. Fine grain structure, low porosity and
excellent machining characteristics all define the cost saving and value added attributes of
ACP 5080. Superb industry leading material dimensional stability is inherent in every plate
of ACP 5080; thanks to proprietary processes and manufacturing control, our flatness and
tolerances are industry leading, predicable and precise.
ACP 5080
„Aus ACP 5080 gefertigte Heizplatten werden u. a. in Maschinen zur
Beflockung von Trikots eingesetzt.“
„Heating plates made from ACP 5080 are used in machines for flock
coating jerseys.“
5
Chemical CompositionEN AW-5083 (AlMg4.5Mn0.7), acc. to DIN EN 573-3 / 3.3547
Material PropertiesMachinability very good (HSC/HPS excellent)
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good, not decorative
Polishing very good
Corrosion Resistance very good
Eroding Properties good
Typical Mechanical PropertiesTensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical PropertiesDensity 2.66 g/cm3
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ω mm2)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2 * 10-6/K
Thickness Range & SizesPlates and pre-cut sizes between 5 mm and 100 mm are available in the following dimensions:
Thickness max. Width* Length*≥ 5 mm x 1320 mm x 3020 mm (up to 6000 mm)
≥ 5 mm x 1520 mm x 3020 mm (up to 6000 mm)
≥ 10 mm x 1570 mm x 3670 mm (up to 6000 mm)
≥ 15 mm x 2160 mm x 4000 mm (up to 6000 mm)
(Blanks, rings and pre-cut sizes on request.)
> 2160 mm Width: Please see the product information for ACP 5080 GIANT / ACP 5080R GIANT
Tolerances Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness 6-12 mm thickness ≤ 0.40 mm**
>12-100 mm thickness ≤ 0.13 mm**
Tolerance in Width for Plates 0/+10 mm
Tolerance in Length for Plates 0/+15 mm
Tolerance (L/W) for Sized Cuts DIN ISO 2768-m (closer on request)
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7), gem. DIN EN 573-3 / 3.3547
Spezifische EigenschaftenSpanbarkeit sehr gut (HSC/HPC hervorragend)
Schweißbarkeit (WIG, MIG) gut (mit S Al 5183)
Anodisierbarkeit gut, nicht dekorativ
Polierbarkeit sehr gut
Korrosionsbeständigkeit sehr gut
Erodierbarkeit gut
Typische Mechanische EigenschaftenZugfestigkeit Rm 240-290 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 110-130 MPa (N/mm2)
Bruchdehnung A 5 % 15
Brinellhärte HB 70
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm3
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ω mm2)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2 * 10-6/K
Dicken & FormatePlatten und Zuschnitte zwischen 5 mm und 100 mm Dicke sind in den folgenden Abmessungen verfügbar:
Dicke max. Breite* Länge*≥ 5 mm x 1320 mm x 3020 mm (bis 6000 mm)
≥ 5 mm x 1520 mm x 3020 mm (bis 6000 mm)
≥ 10 mm x 1570 mm x 3670 mm (bis 6000 mm)
≥ 15 mm x 2160 mm x 4000 mm (bis 6000 mm)
(Ronden, Ringe und Konturzuschnitte auf Anfrage.)
> 2160 mm Breite: Siehe Produktinformation zu ACP 5080 GIANT / ACP 5080R GIANT
ToleranzenOberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit 6-12 mm Dicke ≤ 0,40 mm**
>12-100 mm Dicke ≤ 0,13 mm**
Breitentoleranz für Platten 0/+10 mm
Längentoleranz für Platten 0/+15 mm
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
ACP 5080
* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
** Lineare Messstrecke 1 m
* Further dimensions on request. Subject to technical change.
** Linear measured section 1 m
Ein feinkörniges und porenarmes Aluminium-Gussgefüge zeichnet die gesägten Aluminium-
Gussblöcke, -platten und –zuschnitte aus ACP 5080R aus. Durch gezielte Wärmebehand-
lung über einen ausgedehnten Zeitraum wird das Material zusätzlich homogenisiert und
thermisch entspannt. Die Formstabilität bleibt optimal erhalten. Außergewöhnliche Ab-
messungen, Spannungsarmut und ausgewogene mechanische Eigenschaften sind weitere
ausschlaggebende Vorteile von ACP 5080R.
Fine grain structure, low porosity and excellent machining characteristics all define the cost
saving and value added attributes of every block and plate of ACP 5080R. Outstanding
industry leading material dimensional stability along with good mechanical and physical
properties and an extraordinary range of sizes allow users of ACP 5080R to utilize alimex’s
material and knowledge expertise at its finest. Being an industry innovator and leader,
alimex was the first to introduce aluminium cast plate (ACP 5080R) manufactured to
AA 5083 alloy specifications.
ACP 5080R
„Formen aus ACP 5080R werden u. a. zur Produktion von Snowboards und Skiern eingesetzt.“
„Mouldings made from ACP 5080R are used in the manufacture of snowboards and skis.“
Chemical CompositionEN AW-5083 (AlMg4.5Mn0.7), acc. to DIN EN 573-3 / 3.3547
Material PropertiesMachinability very good (HSC/HPS excellent)
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good, not decorative
Polishing very good
Corrosion Resistance very good
Eroding Properties good
Typical Mechanical PropertiesTensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical PropertiesDensity 2.66 g/cm3
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ω mm2)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2* 10-6/K
Thickness Range & SizesThickness between 8 and 1050 mm. Plates and pre-cut sizes in every dimension depending on the block formats.
Thickness max.Width* Length*570 mm x 1320 mm x 3020 mm (up to 6000 mm)
570 mm x 1520 mm x 3020 mm (up to 6000 mm)
570 mm x 1570 mm x 3670 mm (up to 6000 mm)
570 mm x 2160 mm x 4000 mm (up to 6000 mm)
800 mm x 1570 mm x 4000 mm
1050 mm x 1700 mm x 3000 mm (up to 4000 mm)
(Blanks, rings and pre-cut sizes on request.)
> 2160 mm Width: Please see the product information for ACP 5080 GIANT / ACP 5080R GIANT
TolerancesSurface sawn on all sides
Tolerance in Thickness 0/+3 mm (closer on request)
Tolerance in Width for Plates 0/+10 mm
Tolerance in Length for Plates 0/+15 mm
Tolerance (L/W) for Sized Cuts 0/+3 mm (closer on request)
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7), gem. DIN EN 573-3 / 3.3547
Spezifische EigenschaftenSpanbarkeit sehr gut (HSC/HPC hervorragend)
Schweißbarkeit (WIG, MIG) gut (mit S Al 5183)
Anodisierbarkeit gut, nicht dekorativ
Polierbarkeit sehr gut
Korrosionsbeständigkeit sehr gut
Erodierbarkeit gut
Typische Mechanische EigenschaftenZugfestigkeit Rm 240-290 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 110-130 MPa (N/mm2)
Bruchdehnung A 5 % 15
Brinellhärte HB 70
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm3
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ω mm2)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2* 10-6/K
Dicken & FormateDicken zwischen 8 und 1050 mm. Platten und Zuschnitte in jeder gewünschten Abmessung innerhalb verfügbarer Barren-Formate.
Dicke max. Breite* Länge*570 mm x 1320 mm x 3020 mm (bis 6000 mm)
570 mm x 1520 mm x 3020 mm (bis 6000 mm)
570 mm x 1570 mm x 3670 mm (bis 6000 mm)
570 mm x 2160 mm x 4000 mm (bis 6000 mm)
800 mm x 1570 mm x 4000 mm
1050 mm x 1700 mm x 3000 mm (bis 4000 mm)
(Ronden, Ringe und Konturzuschnitte auf Anfrage.)
> 2160 mm Breite: Siehe Produktinformation zu ACP 5080 GIANT / ACP 5080R GIANT
ToleranzenOberfläche allseitig gesägt
Dickentoleranz 0/+3 mm (enger auf Anfrage)
Breitentoleranz für Platten 0/+10 mm
Längentoleranz für Platten 0/+15 mm
L/B-Toleranz für Zuschnitte 0/+3 mm (enger auf Anfrage)
ACP 5080R
7* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. * Further dimensions on request. Subject to technical change.
ACP 5080 GIANT und ACP 5080R GIANT eröffnen völlig neue Möglichkeiten bei Konstruk-
tion und Design. Mit Abmessungen bis 570 x 2800 x 6000 mm ist alimex weltweit der
einzige Hersteller von Aluminium-Gussplatten, welcher seinen Kunden gesägte oder
gefräste Platten von 15 mm bis 570 mm Dicke in dieser Breiten- und Längen-Dimension
bieten kann. ACP 5080 GIANT und ACP 5080R GIANT besitzen (genau wie ACP 5080 und
ACP 5080R) ein feinkörniges und porenarmes Aluminium-Gussgefüge. Durch gezielte
Wärmebehandlung über einen ausgedehnten Zeitraum wird das Material homogenisiert
und thermisch entspannt. Die Formstabilität bleibt auch bei extremer Zerspanung optimal
erhalten.
ACP 5080 GIANT and ACP 5080R GIANT allow our customers completely new design,
construction and manufacturing possibilities, utilizing our industry leading GIANT plate
dimensions up to 570 x 2800 x 6000 mm. alimex is the only producer and manufacturer
of cast aluminium sawn and surface machined plates in GIANT dimensions in the world.
Customers benefit from more value added, cost saving, and design opportunities through
utilization of our GIANT materials, which are produced with the same superior stability,
ease of machining and physical and mechanical properties of ACP 5080 and
ACP 5080R materials.
ACP 5080 GIANT / ACP 5080R GIANT
„Aus ACP 5080 GIANT gefertigte Bauteile ermöglichen u. a. in der weltgrößten Kunststoffrohr-Schweiß-
maschine das Errichten umfangreicher Bewässerungssysteme.“
„Components made from ACP 5080 GIANT are utilized in the world-largest plastic pipe welding machine for manufacturing
comprehensive irrigation systems.“
Chemical CompositionEN AW-5083 (AlMg4.5Mn0.7), acc. to DIN EN 573-3 / 3.3547
Material PropertiesMachinability very good (HSC/HPS excellent)
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good, not decorative
Polishing very good
Corrosion Resistance very good
Eroding Properties good
Typical Mechanical PropertiesTensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical PropertiesDensity 2.66 g/cm3
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ω mm2)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2* 10-6/K
Thickness Range & SizesACP 5080 GIANT ≥ 15 mm max. 2800 mm max. 6000 mm
ACP 5080R GIANT ≥ 17 mm max. 2800 mm max. 6000 mm
Max. thickness 570 mm. (Blanks, rings and pre-cut sizes on request.)
Tolerances
ACP 5080 GIANT:Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness < 0.50 mm**
Tolerance in Width for Plates 0/+10 mm
Tolerance in Length for Plates 0/+15 mm
Tolerance (L/W) for Sized Cuts DIN ISO 2768-m (closer on request)
ACP 5080R GIANT:Surface sawn on all sides
Tolerance in Thickness 0/+3 mm
Tolerance in Width for Plates 0/+10 mm
Tolerance in Length for Plates 0/+15 mm
Tolerance (L/W) for Sized Cuts 0/+5 mm (closer on request)
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7), gem. DIN EN 573-3 / 3.3547
Spezifische EigenschaftenSpanbarkeit sehr gut (HSC/HPC hervorragend)
Schweißbarkeit (WIG, MIG) gut (mit S Al 5183)
Anodisierbarkeit gut, nicht dekorativ
Polierbarkeit sehr gut
Korrosionsbeständigkeit sehr gut
Erodierbarkeit gut
Typische Mechanische EigenschaftenZugfestigkeit Rm 240-290 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 110-130 MPa (N/mm2)
Bruchdehnung A 5 % 15
Brinellhärte HB 70
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm3
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ω mm2)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2* 10-6/K
Dicken & FormateACP 5080 GIANT ≥ 15 mm max. 2800 mm max. 6000 mm
ACP 5080R GIANT ≥ 17 mm max. 2800 mm max. 6000 mm
Max. Dicke 570 mm. (Ronden, Ringe und Konturzuschnitte auf Anfrage.)
Toleranzen
ACP 5080 GIANT:Oberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit < 0,50 mm**
Breitentoleranz für Platten 0/+10 mm
Längentoleranz für Platten 0/+15 mm
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
ACP 5080R GIANT:Oberfläche allseitig gesägt
Dickentoleranz 0/+3 mm
Breitentoleranz für Platten 0/+10 mm
Längentoleranz für Platten 0/+15 mm
L/B-Toleranz für Zuschnitte 0/+5 mm (enger auf Anfrage)
ACP 5080 GIANT / ACP 5080R GIANT
9** Lineare Messstrecke 1 m ** Linear measured section 1 m
Die Besonderheit der Präzisionsgussplatte ACP 5080MF (mirror finished) ist die einseitig
spiegelgefräste Oberfläche (max. Ra 0,15 μm). Die zweite Seite weist eine feinstgefräste
Oberfläche auf. Durch das feinkörnige und porenarme Aluminium-Gussgefüge, Spannungs-
armut, Formstabilität und ausgewogene mechanische Eigenschaften verbindet ACP 5080MF
die Vorteile der ACP Produkte mit einer optisch einwandfreien Oberfläche. Diese wird
einseitig mit einer Schutzfolie versehen.
The main characteristic of the high precision aluminium cast plate ACP 5080MF is its
mirror finished surface (max. Ra 0.15 μm) on one side. The other side is precision surface
machined. ACP 5080MF extends the major advantages of the ACP products such as fine
grain structure, extremly low porosity, low-stress, dimensional stability and excellent mecha-
nical and physical properties with an optically perfect mirror surface finish, which is covered
by a protective foil.
ACP 5080MF
„ACP 5080MF sorgt auch bei schwerem Gerät für einen reibungslosen Kontakt in
der Drehbewegung.“
„Even with heavy equipment, ACP 5080MF ensures troublefree contact in rotary motion.“
Chemical CompositionEN AW-5083 (AlMg4.5Mn0.7), acc. to DIN EN 573-3 / 3.3547
Material PropertiesMachinability very good
Dimensional Stability very good
Typical Mechanical PropertiesTensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical PropertiesDensity 2.66 g/cm3
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ω mm2)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2* 10-6/K
Thickness Range & SizesPre-cut sizes from 10 mm thickness available according to specification. (Protective foil on one side.)
TolerancesSurface excellent optical
Surface finish A-side Ra max. 0.15 μm
Surface finish B-side Ra ≤ 0.30 μm
This unique product won the European Aluminium Award. See more here: http://awardvideo.alimex.de
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7) gem. DIN EN 573-3 / 3.3547
Spezifische EigenschaftenSpanbarkeit sehr gut
Formstabilität sehr gut
Typische Mechanische EigenschaftenZugfestigkeit Rm 240-290 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 110-130 MPa (N/mm2)
Bruchdehnung A 5 % 15
Brinellhärte HB 70
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm3
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ω mm2)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2* 10-6/K
Dicken & FormateZuschnitte ab 10 mm Dicke nach Spezifikation. (Einseitig mit Schutzfolie versehen.)
ToleranzenOberfläche optisch hervorragend
Oberflächen-Rauwert A-Seite Ra max. 0,15 μm
Oberflächen-Rauwert B-Seite Ra ≤ 0,30 μm
Dieses Produkt gewann den European Aluminium Award. Ein Video dazu finden Sie auf: http://awardvideo.alimex.de
ACP 5080MF
11
Speziell für Zukunftsindustrien entwickelt, bieten ACP 5080S und ACP 5080RS Material-
lösungen für anspruchsvollste und hochsensible Anwendungen. Über Jahrzehnte gesammelte
praktische Erfahrungen sowie vielseitige Tests ermöglichten es in ACP 5080S und ACP 5080RS
ein Material zu entwickeln, dessen mechanische und physikalische Eigenschaften weit über
herkömmliches Aluminium Walz- und auch Gussmaterial – inklusive ACP 5080 und
ACP 5080R – hinaus gehen. Die ausschlaggebende Verbesserung des ultra feinen Gussgefüges
wurde erreicht durch speziell entwickelte Gießverfahren sowie weitere Behandlungsprozesse,
einhergehend mit einer weiteren Reduzierung der Mikroporosität.
Developed for innovative, high-end industries, ACP 5080S and ACP 5080RS provide material
solutions for the most challenging and critical applications. Through decades of practical
application experience, continuous material research, development, and testing, ACP 5080S
and ACP 5080RS provide good mechanical and physical properties as compared with similar
competitors’ cast and rolled aluminium plates. Material excellence and superiority is achieved
through the proprietary smelting, manufacturing, processing and handling procedures and
specifications employed in the production of this grade.
ACP 5080S / ACP 5080RS
Chemical CompositionEN AW-5083 (AlMg4.5Mn0.7) acc. to DIN EN 573-3 / 3.3547
Material PropertiesMachinability excellent
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good (not decorative)
Polishing excellent
Corrosion Resistance excellent
Eroding Properties good
High Speed Cutting excellent Properties
Electrical Discharge good Machining (EDM)
Etching good
Cryogenic excellent
Diffusion Tightness excellent
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7) gem. DIN EN 573-3 / 3.3547
Spezifische EigenschaftenSpanbarkeit hervorragend
Schweißbarkeit (WIG, MIG) gut (mit S Al 5183)
Anodisierbarkeit gut (nicht dekorativ)
Polierbarkeit hervorragend
Korrosionsbeständigkeit hervorragend
Erodierbarkeit gut
Hochgeschwindigkeits- hervorragend bearbeitung
Erodieren gut (EDM)
Ätzen gut
Kryotechnik hervorragend
Diffusionsdichte hervorragend
„ACP 5080S wurde entwickelt und wird konti-nuierlich getestet, um die hohen Anforderungen
in High-Tech-Industrien zu erfüllen.“
„ACP 5080S has been developed and is continuously tested to meet the demanding
requirements of high-tech industries.“
Typical Mechanical PropertiesTensile Strength Rm 240-290 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)
Elongation A 5 % 15
Brinell Hardness HB 70
Typical Physical PropertiesDensity 2.66 g/cm3
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ω mm²)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2* 10-6/K
Thickness Range & SizesThickness between 6 mm (ACP 5080S) / 8 mm (ACP 5080RS) and 570 mm (ACP 5080RS). Plates and pre-cut sizes in every dimension depending on the block formats.
Thickness max.Width* Length*570 mm x 1320 mm x 3020 mm
570 mm x 1570 mm x 3670 mm
570 mm x 2160 mm x 4000 mm
> 2160 mm Width: Please see the product information for ACP 5080 GIANT / ACP 5080R GIANT
Tolerances
ACP 5080SSurface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness 6-12 mm thickness ≤ 0.40 mm** > 12-100 mm thickness ≤ 0.13 mm**
Tolerance (W/L) for Sized Cuts DIN ISO 2768-m (closer on request)
ACP 5080RSSurface sawn on all sides
Tolerance in Thickness 0/+3 mm (closer on request)
Tolerance (W/L) for Cut Pieces 0/+3 mm (closer on request)
Special FeaturesEspecially homogenized / Stress relieved / Ultrasonic tested / Reduced micro-porosity / Tested continuously
Typische Mechanische EigenschaftenZugfestigkeit Rm 240-290 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 110-130 MPa (N/mm2)
Bruchdehnung A 5 % 15
Brinellhärte HB 70
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm3
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ω mm²)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2* 10-6/K
Dicken & FormateDicken zwischen 6 mm (ACP 5080S) / 8 mm (ACP 5080RS) und 570 mm (ACP 5080RS). Platten und Zuschnitte in jeder gewünschten Abmessung innerhalb verfügbarer Barren-Formate.
Dicke max. Breite* Länge*570 mm x 1320 mm x 3020 mm
570 mm x 1570 mm x 3670 mm
570 mm x 2160 mm x 4000 mm
> 2160 mm Breite: Siehe Produktinformation zu ACP 5080 GIANT / ACP 5080R GIANT
Toleranzen
ACP 5080SOberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit 6-12 mm Dicke ≤ 0,40 mm** > 12-100 mm Dicke ≤ 0,13 mm**
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
ACP 5080RSOberfläche allseitig gesägt
Dickentoleranz 0/+3 mm (enger auf Anfrage)
L/B-Toleranz für Zuschnitte 0/+3 mm (enger auf Anfrage)
Besondere EigenschaftenSpeziell Homogenisiert / Spannungsarm / Ultraschall geprüft / Reduzierte Mikroporosität / Kontinuierlich getestet
ACP 5080S / ACP 5080RS
13
* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
** Lineare Messstrecke 1 m
* Further dimensions on request. Subject to technical change.
** Linear measured section 1 m
ACP 6000 ist eine beidseitig feinstgefräste Aluminium-Präzisionsgussplatte, welche sich
durch Spannungsarmut und hervorragende Spanbarkeit bei ausreichender Festigkeit aus-
zeichnet. Aufgrund des Aluminium-Gussgefüges und einer speziellen Wärmebehandlung vor
dem Fräsen bleibt die Formstabilität, auch bei komplizierter Zerspanung, optimal erhalten.
Zum Schutz der feinstgefrästen Oberflächen werden alle Platten beidseitig mit einer Schutz-
folie versehen.
The main advantages of the precision surface aluminium cast plate ACP 6000 are low
inherent internal stress and excellent machining characteristics, in combination with uni-
form consistency throughout the material. Due to the superior cast structure and extended
thermal treatment during production, ACP 6000 offers high dimensional stability during ex-
treme machining. Each plate is covered with protective foil on both sides to ensure surface
integrity during shipment.
ACP 6000
„In Formen aus ACP 6000 werden u. a. Verpackungen für Lebensmittel produziert.“
„One use of moulds made from ACP 6000 is the manufacture of food packaging.“
Chemical CompositionAl -alloy type 7xxx
Material PropertiesMachinability very good
Weldability (TIG, MIG) adequate (with S Al 4043A)
Anodising Properties good
Polishing good
Corrosion Resistance adequate
Eroding Properties good
Dimensional Strength very good
Typical Mechanical PropertiesTensile Strength Rm min. 165 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2 min. 105 MPa (N/mm2)
Elongation A 5 % 3
Brinell Hardness HB 65
Typical Physical PropertiesDensity 2.80 g/cm3
Thermal Conductivit 140 W/(mK)
Electrical Conductivity 19-24 MS/m (m/Ω mm2)
Modulus of Elasticity ~71,000 N/mm2
Coefficient of Thermal Expansion 24.6* 10-6/K
Thickness Range & Sizes Plates and pre-cut sizes up to 100 mm thickness are available in the following dimensions:
Thickness max. Width* max. Length*≥ 6 mm x 1570 mm x 3670 mm
TolerancesSurface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness 6-12 mm thickness ≤ 0.40 mm** > 12-100 mm thickness ≤ 0.13 mm**
Tolerance in Width for Plates 0/+10 mm
Tolerance in Length for Plates 0/+15 mm
Tolerance (L/W) for Sized Cuts DIN ISO 2768-m (closer on request)
ZusammensetzungAl -Legierung Typ 7xxx
Spezifische EigenschaftenSpanbarkeit sehr gut
Schweißbarkeit (WIG, MIG) geeignet (mit S Al 4043A)
Anodisierbarkeit gut
Polierbarkeit gut
Korrosionsbeständigkeit befriedigend
Erodierbarkeit gut
Formstabilität sehr gut
Typische Mechanische EigenschaftenZugfestigkeit Rm min. 165 MPa (N/mm2)
0,2 % Dehngrenze Rp 0,2 min. 105 MPa (N/mm2)
Bruchdehnung A 5 % 3
Brinellhärte HB 65
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,80 g/cm3
Wärmeleitfähigkeit 140 W/(mK)
Elektrische Leitfähigkeit 19-24 MS/m (m/Ω mm2)
Elastizitätsmodul ~71.000 N/mm2
Wärmeausdehnungs- koeffizient 24,6* 10-6/K
Dicken & FormatePlatten und Zuschnitte bis 100 mm Dicke sind in den folgenden Abmessungen verfügbar:
Dicke max. Breite* max. Länge*≥ 6 mm x 1570 mm x 3670 mm
ToleranzenOberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit 6-12 mm Dicke ≤ 0,40 mm** > 12-100 mm Dicke ≤ 0,13 mm**
Breitentoleranz für Platten 0/+10 mm
Längentoleranz für Platten 0/+15 mm
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
ACP 6000
15
* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
** Lineare Messstrecke 1 m
* Further dimensions on request. Subject to technical change.
** Linear measured section 1 m
PLANAL-Werkstoffe sind beidseitig feinstgefräste Aluminium-Walzplatten. Die hohe Festig-
keit in Verbindung mit der Präzision einer feinstgefrästen Platte ist kennzeichnend für diese
Gruppe von Werkstoffen. Durch beidseitiges Fräsen und Abtragen der Walzhaut werden
die mechanischen Eigenschaften und der Werkstoffzustand nicht verändert. PLANAL 5083
erhält zusätzlich vor dem Fräsen eine Wärmebehandlung zum Abbau von Eigenspannungen
und Verzugsneigung. Dieser Werkstoff kann, bei Bedarf, in Dicken zwischen 10 und 25 mm
auch in Überbreiten bis 2500 mm produziert werden. Sonderwünsche können ggf. berück-
sichtigt werden. Der Lieferumfang umfasst Platten, Präzisionszuschnitte, Ronden und Ringe
in jeder gewünschten Abmessung innerhalb verfügbarer Dicken und Plattenformate.
PLANAL materials are a range of rolled aluminium plates which are precision surface
machined on both sides. High strength and high precision are the main features of this
product group. PLANAL 5083 is given a thermal treatment to relieve any built-in stress
before precision surface machining. PLANAL materials are available from 6 mm in thick-
ness, oversize width plates are also possible. Special requirements can always be
considered. The range of material involves full plates, cut to size blanks and rings.
PLANAL 5083 / 6082 / 7075
„Aus Planal 6082 werden u. a. Auflagen für Bedientastaturen im Medizinbereich gefertigt.“
„Planal 6082 is, for example, used to manufacture coatings for operator keyboards in medicine.“
Chemical CompositionEN AW-5083(AlMg4.5Mn0.7) acc. to DIN EN 573-3 / 3.3547
Material Condition O/H111
Material PropertiesMachinability good
Weldability (TIG, MIG) good (with S Al 5183)
Anodising Properties good, not decorative
Typical Mechanical PropertiesTensile Strength Rm min. 270 MPa (N/mm²)
0.2 % Yield Strength Rp 0.2 min. 115 MPa (N/mm²)
Elongation A 5 % min. 15
Brinell Hardness HB min. 73
Typical Physical PropertiesSpecific Weight 2.66 g/cm³
Thermal Conductivity 110-140 W/(mK)
Electrical Conductivity 16-19 MS/m (m/Ωmm²)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 24.2* 10-6/K
Thickness Range & Sizes
Thickness max. Width* max. Length*≥ 6 mm x 1520 mm x 3020 mm
TolerancesSurface precision surface machined
Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness 6-15 mm thickness ≤ 0.40 mm**
> 15 mm thickness ≤ 0.20 mm**
L/W-Tolerances for Plates DIN EN 485-3
L/W-Tolerances for pre-cut Sizes DIN ISO 2768-m (closer on request)
ZusammensetzungEN AW-5083 (AlMg4,5Mn0,7) gem. DIN EN 573-3 / 3.3547
Werkstoffzustand O/H111
Spezifische EigenschaftenSpanbarkeit gut
Schweißbarkeit (WIG, MIG) gut (mit S Al 5183)
Anodisierbarkeit gut, nicht dekorativ
Typische Mechanische EigenschaftenZugfestigkeit Rm min. 270 MPa (N/mm²)
0,2 % Dehngrenze Rp 0,2 min. 115 MPa (N/mm²)
Bruchdehnung A 5 % min. 15
Brinellhärte HB min. 73
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,66 g/cm³
Wärmeleitfähigkeit 110-140 W/(mK)
Elektrische Leitfähigkeit 16-19 MS/m (m/Ωmm²)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 24,2* 10-6/K
Dicken & Formate
Dicke max. Breite* max. Länge*≥ 6 mm x 1520 mm x 3020 mm
ToleranzenOberfläche feinstgefräst
Oberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit 6-15 mm Dicke ≤ 0,40 mm**
> 15 mm Dicke ≤ 0,20 mm**
L/B-Toleranzen für Platten DIN EN 485-3
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
PLANAL 5083
17
* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
** Lineare Messstrecke 1 m
* Further dimensions on request. Subject to technical change.
** Linear measured section 1 m
Chemical CompositionEN AW-6082(AlSi1MgMn) acc. to DIN EN 573-3 / 3.2315
Material Condition T651
Material PropertiesMachinability good
Weldability (TIG, MIG) good (with S Al 5356/5183)
Anodising Properties very good, not decorative
Typical Mechanical PropertiesTensile Strength Rm min. 295 MPa (N/mm²)
0.2 % Yield Strength Rp 0.2 min. 240 MPa (N/mm²)
Elongation A 5 % min. 8
Brinell Hardness HB min. 89
Typical Physical PropertiesSpecific Weight 2.70 g/cm³
Thermal Conductivity 170-220 W/(mK)
Electrical Conductivity 24-32 MS/m (m/Ωmm²)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 23.4* 10-6/K
Thickness Range & Sizes
Thickness max. Width* max. Length*≥ 10 mm x 1520 mm x 3020 mm
TolerancesSurface precision surface machined
Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness on request
L/W-Tolerances for Plates DIN EN 485-3
L/W-Tolerances for pre-cut Sizes DIN ISO 2768-m (closer on request)
ZusammensetzungEN AW-6082 (AlSi1MgMn) gem. DIN EN 573-3 / 3.2315
Werkstoffzustand T651
Spezifische EigenschaftenSpanbarkeit gut
Schweißbarkeit (WIG, MIG) gut (mit S Al 5356/5183)
Anodisierbarkeit sehr gut, nicht dekorativ
Typische Mechanische EigenschaftenZugfestigkeit Rm min. 295 MPa (N/mm²)
0,2 % Dehngrenze Rp 0,2 min. 240 MPa (N/mm²)
Bruchdehnung A 5 % min. 8
Brinellhärte HB min. 89
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,70 g/cm³
Wärmeleitfähigkeit 170-220 W/(mK)
Elektrische Leitfähigkeit 24-32 MS/m (m/Ωmm²)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 23,4* 10-6/K
Dicken & Formate
Dicke max. Breite* max. Länge*≥ 10 mm x 1520 mm x 3020 mm
ToleranzenOberfläche feinstgefräst
Oberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit auf Anfrage
L/B-Toleranzen für Platten DIN EN 485-3
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
PLANAL 6082
* Further dimensions on request. Subject to technical change. * Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
Chemical CompositionEN AW-7075(AlZn5.5MgCu) acc. to DIN EN 573-3 / 3.4365
Material Condition T651/T652
Material PropertiesMachinability good
Weldability (TIG, MIG) not adequate
Anodising Properties adequate, not decorative
Typical Mechanical PropertiesTensile Strength Rm min. 495 MPa (N/mm²)
0.2 % Yield Strength Rp 0.2 min. 420 MPa (N/mm²)
Elongation A 5 % min. 6
Brinell Hardness HB min. 147
Typical Physical PropertiesSpecific Weight 2.80 g/cm³
Thermal Conductivity 130-160 W/(mK)
Electrical Conductivity 19-23 MS/m (m/Ωmm²)
Modulus of Elasticity ~70,000 N/mm2
Coefficient of Thermal Expansion 23.4* 10-6/K
Thickness Range & Sizes
Thickness max. Width* max. Length*≥ 10 mm x 1520 mm x 3020 mm
TolerancesSurface precision surface machined
Surface Finish Ra ≤ 0.3 μm
Tolerance in Thickness +/- 0.1 mm
Flatness on request
L/W-Tolerances for Plates DIN EN 485-3
L/W-Tolerances for pre-cut Sizes DIN ISO 2768-m (closer on request)
ZusammensetzungEN AW-7075 (AlZn5,5MgCu) gem. DIN EN 573-3 / 3.4365
Werkstoffzustand T651/T652
Spezifische EigenschaftenSpanbarkeit gut
Schweißbarkeit (WIG, MIG) weniger geeignet
Anodisierbarkeit befriedigend, nicht dekorativ
Typische Mechanische EigenschaftenZugfestigkeit Rm min. 495 MPa (N/mm²)
0,2 % Dehngrenze Rp 0,2 min. 420 MPa (N/mm²)
Bruchdehnung A 5 % min. 6
Brinellhärte HB min. 147
Typische Physikalische EigenschaftenSpezifisches Gewicht 2,80 g/cm³
Wärmeleitfähigkeit 130-160 W/(mK)
Elektrische Leitfähigkeit 19-23 MS/m (m/Ωmm²)
Elastizitätsmodul ~70.000 N/mm2
Wärmeausdehnungs- koeffizient 23,4* 10-6/K
Dicken & Formate
Dicke max. Breite* max. Länge*≥ 10 mm x 1520 mm x 3020 mm
ToleranzenOberfläche feinstgefräst
Oberflächen-Rauwert Ra ≤ 0,3 μm
Dickentoleranz +/- 0,1 mm
Ebenheit auf Anfrage
L/B-Toleranzen für Platten DIN EN 485-3
L/B-Toleranz für Zuschnitte DIN ISO 2768-m (enger auf Anfrage)
PLANAL 7075
19* Further dimensions on request. Subject to technical change. * Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten.
WALZMATERIAL / ROLLED MATERIAL
Alloy 5083
Thickness Range & Sizes
Thickness max. Width* max. Length*5-200 mm x 1520 mm x 3020 mm
15-30 mm x 2500 mm x 4000 mm
Alloy 6082
Thickness Range & Sizes
Thickness max. Width* max. Length*6-200 mm x 1520 mm x 3020 mm
Alloy 7075
Thickness Range & Sizes
Thickness max. Width* max. Length*5-300 mm x 1520 mm x 3020 mm
Pre-cut sizes, blanks and rings in every dimension depending on the block formats.
Legierung 5083
Dicken & Formate
Dicke max. Breite* max. Länge*5-200 mm x 1520 mm x 3020 mm
15-30 mm x 2500 mm x 4000 mm
Legierung 6082
Dicken & Formate
Dicke max. Breite* max. Länge*6-200 mm x 1520 mm x 3020 mm
Legierung 7075
Dicken & Formate
Dicke max. Breite* max. Länge*5-300 mm x 1520 mm x 3020 mm
Zuschnitte, Ronden und Ringe in jeder gewünschten Abmessung innerhalb verfügbarer Plattenformate.
Sonstiges Material / Further Material
alimex führt Walzmaterial sowohl nach allgemeiner Norm DIN EN 485 / 573 als auch mit
Luftfahrtspezifikation nach DIN EN 9120. (OASIS OIN:611557 3222)
alimex trades both rolled material according to DIN EN 485 / 573 standard and material
with specification according to DIN EN 9120 for the aviation industry.
(OASIS OIN: 611557 3222)„Wir handeln mit Luftfahrtmaterial und produzieren
Tooling-Material z.B. für die Kabinenausstattung“
„We deal with aviation material and produce tooling material e.g. for cabin interiors.“
* Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. * Further dimensions on request. Subject to technical change.
Sämtliche Werkstoffe stammen ausschließlich von zugelassenen Herstellern der Luftfahrtindustrie und werden entweder in Westeuropa oder USA produziert. Entsprechende Dokumentation wird mitgeliefert.
All our materials are exclusively produced by certified manufacturers of the aviation industry in Western Europe or the USA and are supplied with the relevant documentation.
LUFTFAHRT MATERIAL / AVIATION MATERIAL
21
Werkstoff3.1354 T351 (2024 bare)
NormenLN 9073, DAN 26, DAN 422, AMS QQ-A 250/4, ABS 5032
Werkstoff3.4364 T7351 (7075/7175)
NormenLN 9073, DAN 26, DAN 422, AMS QQ-A 250/12, ABS 5064
Werkstoff3.3214 T651 (6061)
NormenLN 9073, DAN 26, DAN 422, AMS QQ -A 250/11, DIN 29546
Werkstoff3.4144 T7451 (7050)
NormenLN 9073, ABS 5323, AIMS 03-02-022, AMS 4050
Alle oben genannten Werkstoffe sind in den folgenden Ab- messungen verfügbar. Ebenfalls lieferbar sind alle aus den Formaten zu fertigende Zuschnitte.
Dicken & Formate
Dicke max. Breite max. Länge6,35-140 mm x 1250 mm x 2500 mm
Material 3.1354 T351 (2024 bare)
StandardsLN 9073, DAN 26, DAN 422, AMS QQ-A 250/4, ABS 5032
Material 3.4364 T7351 (7075/7175)
StandardsLN 9073, DAN 26, DAN 422, AMS QQ-A 250/12, ABS 5064
Material 3.3214 T651 (6061)
StandardsLN 9073, DAN 26, DAN 422, AMS QQ-A 250/11, DIN 29546
Material 3.4144 T7451 (7050)
StandardsLN 9073, ABS 5323, AIMS 03-02-022, AMS 4050
All materials mentioned above are available in the following dimensions. Also available are all pre-cut sizes fitting to these formats.
Thickness Range & Sizes
Thickness max. Width max. Length6.35-140 mm x 1250 mm x 2500 mm
PLATTEN / PLATES
Werkstoff3.1364 T3 oder T351 (2024 clad)
NormenLN 9073, DAN 424, ABS 5044, AIMS 03-04-014 / AIMS 03-04-009,
AIMS 03-04-000
Werkstoff3.3214 T4 (6061)
NormenLN 9073, DAN 424, DIN 27546, AMS QQ-A 250/11, ABS 5452,
AIMS 03-04-042
Alle oben genannten Werkstoffe sind in den folgenden Abmessungen verfügbar. Andere Legierungen, Temper und Abmessungen auf Anfrage. Lieferung von Blechen nur in kompletten Formaten.
Dicken & Formate
Dicke max. Breite max. Länge0,5-6,0 mm x 1200 mm x 2500 mm
Material 3.1364 T3 or T351 (2024 clad)
StandardsLN 9073, DAN 424, ABS 5044, AIMS 03-04-014 / AIMS 03-04-009,
AIMS 03-04-000
Material 3.3214 T4 (6061)
StandardsLN 9073, DAN 424, DIN 27546, AMS QQ-A 250/11, ABS 5452,
AIMS 03-04-042
All materials mentioned above are available in the following dimensions. Other alloys, temper and dimensions upon request. Aluminium sheets in full format only.
Thickness Range & Sizes
Thickness max. Width max. Length0.5-6.0 mm x 1200 mm x 2500 mm
BLECHE / SHEETS
LUFTFAHRT MATERIAL / AVIATION MATERIAL
Werkstoff3.1354 T3511 / T4
NormenLN 1798 (≤ ø 12 mm), LN 1799, DIN EN 755-3, DIN 65113
Werkstoff3.3214 T6511
NormenLN 1799, DIN EN 755- 3, DIN 65113
Werkstoff3.4364 T7351
NormenLN 1799, DIN EN 755- 3, DIN 65113
Alle oben genannten Werkstoffe sind in den folgenden Abmessungen verfügbar. 2618A-T8511 und 2014A- T6511 auf Anfrage.
Dicken & Formate
Abmessungsbereich x HerstellungslängeØ 10-200 mm x 3000 mm
Material 3.1354 T3511 / T4
StandardsLN 1798 (≤ ø 12 mm), LN1799, DIN EN 755- 3, DIN 65113
Material 3.3214 T6511
StandardsLN 1799, DIN EN 755- 3, DIN 65113
Material 3.4364 T7351
StandardsLN 1799, DIN EN 755- 3, DIN 65113
All materials mentioned above are available in the following dimensions. 2618A-T8511 and 2014A- T6511 upon request.
Thickness Range & Sizes
Dimensional range x Production lengthØ 10-200 mm x 3000 mm
RUNDSTANGEN / RODS
Ein nach modernem Standard ausgerüsteter und vollklima-
tisierter Maschinenpark sowie ein hochqualifiziertes, auf
die Bearbeitung von Aluminium spezialisiertes Team sorgen
dafür, dass Kundenwünsche effektiv, präzise und vor allem
wirtschaftlich umgesetzt werden. Hochmoderne Bearbei-
tungszentren ermöglichen es, unter höchster Präzision, auch
extrem anspruchsvolle Geometrien zu realisieren.
Kunden unterschiedlicher Branchen schätzen, neben
der langjährigen Erfahrung in der Produktion komplexer
Aluminium-Bauteile, vor allem den Service bei der Her-
stellung einbaufertiger Komponenten aus einer Hand. Die
Aluminiumhalbzeuge sowie CNC Fräsarbeiten kommen
aus eigenem Hause. Die Oberflächenveredelungen, wie
Eloxieren, Beschichten oder Lackieren, werden von spezia-
lisierten Partnerfirmen übernommen. alimex bleibt jedoch
Ihr Ansprechpartner von der Anfrage bis zur einbaufertigen
Komponente.
Der Datenaustausch läuft über alle gängigen CAD-Systeme.
Für die Erstellung von Prüfprotokollen und Dokumenta-
tionen stehen 3D-Koordinatenmessmaschinen neuster
Generation zur Verfügung.
A state of the art and fully air-conditioned building, which
houses the very latest in CNC machinery as well as a highly
qualified and experienced team of aluminium specialists,
guarantees the effective, precise and efficient realisation of
the customers` exact requirements. The leading-edge ma-
chinery enables the production of challenging geometries
with extremely high accuracy.
Customers of many different industries appreciate the
experience of alimex in producing complex aluminium com-
ponents but also the service of ready-to-install components
from one supplier. The semi-finished aluminium products
as well as the milling process will be supplied out of alimex
directly. The surface-finishing such as anodising, coatings
or varnishing will be done by reputable specialised partner
companies on our behalf. However, your entire contact point
will be alimex from your initial request through to ready-to-
install components.
Data exchange is available by all established CAD-Systems.
To generate inspection records or documentation, state
of the art 3D coordination measuring machines are also
employed by alimex.
CNC-Komponenten-Fertigung / CNC-Components-Production
© alimex, 2013
PROVIDING LEADING-EDGE ALUMINIUM CAST PLATE SOLUTIONS
n alimex Metallhandelsgesellschaft mbHKarl-Arnold-Straße 14-1647877 Willich Germany
Phone: +49 (0) 2154 9177 0Fax: +49 (0) 2154 9177 338E-Mail: [email protected]: www.alimex.de
n alimex Benelux B.V.Patersstraat 19b5801 AT VenrayNetherlands
Phone: +31 (0) 478 550288Fax: +31 (0) 478 588182E-Mail: [email protected]: www.alimex.nl
n alimex UK Precision in Aluminium Ltd.6 Fingle Drive, StonebridgeMilton Keynes MK13 0ABUnited Kingdom
Phone: +44 (0) 1908 224240Fax: +44 (0) 1908 224241E-Mail: [email protected]: www.alimex.uk.com
n alimex Precision in Aluminum Inc.18124 Wedge Parkway #410Reno, Nevada 89511-8134USA
Phone: +1 775 - 851 - 1522Fax: +1 775 - 851 - 1511E-Mail: [email protected]: www.alimexnorthamerica.com
Die alimex Gruppe The alimex Group