luminaire approved by SABS - RML• Wall mounted without bracket (bulkhead). CATALOGUE NO. LAMP TYPE RCF 7 1 X PL7W CFL RCF 9 1 X PL9W CFL RCF 11 1 X 11W CFL RCF 13 1 X 13W CFL RCF

2

luminaire approved by SABS

energy saving lamp

energy efficient

imported luminaire

locally manufactured luminaire

Content & Contact Details 2 - 3Gen-flood /Double Gen-flood 4 - 6Securi -Flood 7Econo- flood range 8 - 10Energy Saving Flood range 11Miniflood HID – CFL – (LED) range 12 - 14Mini Wedge CFL /Campa-lite 12V / (LED) 15 - 18Industrial Highbay range 19Industrial Lowbay range 20Rondo Mini Bulkhead range (LED) 21 - 22Rondo Slim range (LED) 23 - 24Rondo Maxi Range 25 - 26LED Flood range 27 - 32Fluorescent range (WIRED FOR LED) 33Exit signs 34Accessories 35 - 38Technical Info. 39 - 41

Website: www.rml.co.zaEmail: [email protected]: +27 82 563 1989

Clint Groves - Email: [email protected]: +27 82 334 0932

VANGIFLASH (Pty)Ltd T/A RML LIGHTING Vat. Number: 4230264279

Reg. Number: 2013/115021/07 24 Ashfield Avenue , Springfield Park DurbanTel: +27 31 579 3090 . Fax: +27 31 579 3021

Website: www.rml.co.za

Dwaine Pieterse - Email: [email protected] Longford - Email: [email protected]

Mobile: +27 82 563 1989

Dwaine Pieterse - Email: [email protected]: +27 72 173 2953

Michael Longford - Email: [email protected]: +27 82 563 1989

Clint Groves - Email: [email protected]: +27 82 334 0932

Tracy Robinson - Email: [email protected]

Tracy Robinson - Email: [email protected] Longford - Email: [email protected]

http://www.rml.co.za/

mailto:[email protected]


http://www.rml.co.za/









• Specially designed cooling fins on the lamp housing increase surface cooling area by 300%.

• Ribbed section in extrusion directly behind the lamp arc tube prevents light (heat) from being reflected back into the lamp arc tube preventing high lamp arc voltage and, therefore, “cycling” of lamp.

• All screws and fasteners of 316 marine grade stainless steel.• Asymmetric/progressive parabolic reflector emits main beam at 38° from the

vertical – no light pollution.• Wide beam spread – 107° in horizontal and 93° in vertical planes.• Can be supplied with hammered finish reflector ensuring very wide beam with

no striations (billboard and tennis court lighting).• Anti-vibration brackets optional for crane mounting.• Can be supplied with hammered finish reflector ensuring very wide beam with

no striations (billboard and tennis court lighting).• Relatively light in weight allows for ease of installation.• Lamp replacement without altering focus.• Can be epoxy powder coated for extreme corrosion protection.• Tennis courts and small sports field lighting, general flood and security lighting,

building facades, car parks, billboard, ship and dredger lighting.• Lamp housing: Consists of extruded aluminium sections (bright anodised to 15

microns), high pressure die cast aluminium “side plates” (LM6M low copper content aluminium alloy).

• Front glass: 5mm thick thermal shock resistant glass.

• Control Gear Housing: Consists of extruded box shaped aluminium extrusions (anodised to 15 microns) with end plate of injection moulded glass reinforced nylon.

• Brackets : Attaching lamp housing to control gear housing and mounting bracket in extruded anodised aluminium (anodised to 15 microns)

• 250w/400w HP Sodium (HPS/T) • 250w/400w Metal Halide (MH/T) tubular lamps

• Lamp housing IP65• Control Gear Housing IP54

CATALOGUE NO. LAMP TYPE

RF250S 250w H.P Sodium (Tubular)

RF400S 400w H.P Sodium (Tubular)

RF250MH 250w Metal Halide (Tubular)

RF400MH 400w Metal Halide (Tubular)

Essentially similar in all respects to the Genflood, this floodlight is designed to be equipped with two lamps.• Lamps may be switched individually thereby providing two

levels of illumination. This is ideal for sports field lighting in that for practice sessions light level may be reduced thereby saving power. More economical than using two separate floodlights.

• Lamps may be mixed. Sodium and Metal Halide – this provides a more acceptable colour than pure Sodium.

• Can be epoxy powder coated for use in extremely corrosive areas.


DRF250S 250w H.P Sodium (Tubular)

DRF400S 400w H.P Sodium (Tubular)

DRF250MH 250w Metal Halide (Tubular)

DRF400MH 400w Metal Halide (Tubular)

Representing the latest in lighting technology and innovative design this floodlight is protected under Registered Design No. 8-007 and complies with Department of Public Works Specification No. 4/37(1) which supersedes Defence Specification No. W39-7/0043-5/E for perimeter fence security lighting.• The floodlight utilises 2 lamps to provide a beam exactly 180° wide in the

horizontal plane.• Mounted 0.5m behind the fence at 3-4m mounting heights the poles may be

spaced up to 90cm apart.• No backward spillage of light enabling a patrolling guard to be totally invisible

when 1m behind the fence. • Relatively small compact design produces minimum target.• No dark spot between poles in the event of on lamp failing.• Extremely high ratio of Vertical illumination : Horizontal illumination (5:1 at

30mn outside fence) ensures that an intruder will cast a long dark shadow enabling him to be easily spotted.

• Control gear mounting plate slides out for ease of maintenance.• Front glass 5mm thick Armour-plated physical and thermal shock resistant.

Manufactured for use in harsh coastal corrosive climatic conditions – all fasteners of 316 marine grade stainless steel.

• Lower than conventional mounting height means saving on pole costs and installation.

• Available for use with 70W, 150W, 250W and 400W HP sodium or metal halide tubular lamps.

• Can be epoxy powder coasted for use in extremely corrosive areas.

• The housing is made of high-pressure die cast aluminium alloy with a high-purity, hammered aluminium reflector

• Medium to Wide beam• High temperature silicon seal• All fasteners stainless steel.• Enclosure protection grade: IP65• Ideal for lighting sports fields, general areas and for

security floodlighting


RFC250 HPS/MH Tubular/Elliptical

RFC250 MV Tubular/Elliptical

RFC400 HPS/MH Tubular/Elliptical

RFC400 MV Tubular/Elliptical

RCF ES Tubular/Elliptical

• Chemically treated against corrosion and Epoxy powder coated.

• Integral C/G housing fitted.• All fasteners are stainless steel.• High-purity hammered reflector. (aluminium)• Single lamp replacement without disturbing the luminaires

focus.• Front glass 5mm thick, thermal shock resistant.• Die-cast aluminium lamp housing.• For use with 1000W 240V tubular lamps.• For use in lighting large public areas, sports stadia, security

and general area lighting.

CATALOGUE NO. LAMP TYPE MASS

RFC1000W MH 1000W Tubular 24kg

RFC1000W MH+L 1000W Tubular 24kg

• Chemically treated against corrosion and Epoxy powder coated.

• Separate die-cast aluminium C/G housing for remote mounting.

• All fasteners are stainless steel.• High-purity hammered reflector. (aluminium)• Single lamp replacement without disturbing the luminaires

focus.• Front glass 5mm thick, thermal shock resistant.• For use with 2000W 380V tubular lamps.• For use in lighting large public areas, sports stadia, security

and general area lighting.

CATALOGUE NO. LAMP TYPE MASS

RFC2000W MH 2000W Tubular 36kg

RFC2000W MH+L 2000W Tubular 36kg

• The housing is made of high-pressure die-cast aluminium alloy with a high-purity, hammered aluminium reflector.

• Medium to Wide beam.• All fasteners stainless steel.• Enclosure protection grade: IP65• Ideal for general area and security lighting.• Suitable for E27 CFL lamps.


RFC85W ES + LAMP 85W E27 SPIRAL CFL

RFC105W ES + LAMP 105W E27 SPIRAL CFL

RFC ES EMPTY E27 SPIRAL CFL

CATALOGUE NO. LAMP TYPEMF80 MV 80W Mercury Vapour.

MF125 MV 125W Mercury Vapour.

MF70 HPS/MH E27 70W H.P Sodium/M Halide.

MF70 MH DOUBLE ENDED 70W Double Ended M Halide.

MF150 HPS/MH E27 150W H.P Sodium/M Halide.

MF150 MH DOUBLE ENDED 150W Double Ended M Halide.

• Body Injection moulded U.V stabilised polycarbonate. • Lens Injection moulded U.V stabilised polycarbonate. • 4mm thick ‘armour-plated’ thermal shock resistant glass.• Stirrup Mounting Anodised (15 microns) aluminium bracket.• Screws & Fasteners are 316 Marine grade steel.• Ingress Protection grade: IP65• Applications include lighting Car Parks, Building Facades, Billboards & Signs,

Walkways, General Security lighting.• Wall mounted without bracket – Bulkhead.• Hidden internal hinge for cover.• Extruded Anodised (15 microns) aluminium post top mounting bracket suitable

for mounting single or double luminaires (optional).• Body/Lid colour in grey (standard)

• Hidden internal hinge for cover.• Built-in photoelectric cell (optional).• Extruded Anodised (15 microns) aluminium post top mounting bracket

suitable for mounting single or double luminaires back-to-back(optional)• Body/Lid colour in grey (standard) • Body & Cover/Lens: Injection moulded U.V stabilised polycarbonate• Reflector: 99.9% Pure chemically brightened anodised aluminium• Stirrup Mounting Anodised (15 microns) aluminium Bracket.• Screws & Fasteners are 316 Marine grade steel.• Ingress Protection grade: IP65• Applications include lighting Car Parks, Building Facades, Billboards & Signs,

Walkways and general Security lighting. • Wall mounted without bracket – Bulkhead.


MF2X26 (Flat) 2 x PL26W CFL

MF2X26 (Bubble) 2 x PL26W CFL

MF1XES 1 X E27 E.SAVING CFL

MF2XES 2 X E27 E.SAVING CFL

LED

• Body Injection moulded U.V stabilised polycarbonate. • 4mm thick ‘armour-plated’ thermal shock resistant glass.• Stirrup Mounting Anodised (15 microns) aluminium bracket.• Screws & Fasteners are 316 Marine grade steel.• Ingress Protection grade: IP65• Applications include lighting Car Parks, Building Facades, Billboards & Signs,

Walkways, General Security lighting.• Wall mounted without bracket – Bulkhead.• Hidden internal hinge for cover.• Extruded Anodised (15 microns) aluminium post top mounting bracket suitable

for mounting single or double luminaires (optional).• Body/Lid colour in grey (standard) • Available in a range of wattages.

• Suitable for compact fluorescent lamps from 7 to 26 Watts• Manufactured from tough, UV stabilised polycarbonate• IP65 (neoprene gasket)• Available with built-in photocell• Maintenance friendly clip-orientated lens• Can be fitted with either switch start or electronic control gear• Compact dimensions (230 x 220 x 85mm), Low mass (1.5 kg) • Reflector: 99.9% Pure chemically brightened anodised aluminium• Screws & Fasteners: 316 Marine grade steel• Body colours: Green, Black or Grey• Lens colours : Clear(Standard), Green, Amber, Blue• Applications include general security lighting, garden lighting, billboard

lighting. • Wall mounted without bracket (bulkhead).

CATALOGUE NO. LAMP TYPERCF 7 1 X PL7W CFL

RCF 9 1 X PL9W CFL

RCF 11 1 X 11W CFL

RCF 13 1 X 13W CFL

RCF 18 1 X 18W CFL

RCF 26 1 X 26W CFL

RCF ES 1 X E27 Energy Saving CFL

• Suitable for 11w 12V dc CFL lamps.• Manufactured from tough, UV stabilised

polycarbonate.• IP65 (neoprene gasket).• Maintenance friendly clip-orientated lens.• Compact dimensions (230 x 220 x 85mm), Low

mass (1.5 kg). • Reflector: 99.9% Pure chemically brightened

anodised aluminium.• Screws & Fasteners: 316 Marine grade steel.• Body and Lens colours as per MINIWEDGE.• Current consumption with 11Watt 12V CFL= 0.9A.• Fitted with 3m cab tyre.• Wall mounted without bracket.


CAMPALITE 11W E27 12V DC CFL

Body is manufactured from tough, UV stabilised polycarbonate (COASTAL FRIENDLY)

IP65 (neoprene gasket)Available with built-in photocell

Maintenance friendly clip-orientated lensCompact dimensions (230 x 220 x 85mm), Low mass (1.5 kg)

Reflector: Aluminium.Screws & Fasteners: 316 Marine grade stainless steel.

(COASTAL FRIENDLY)Body colours: Green, Black or Grey

Lens colours : Clear, Green, Amber, BlueApplications include general security lighting, garden

MINI WEDGE OUTPUT WATT

WATTS INPUT COLOUR COLOUR

TEMPERATURE K

LUMINOUS lm

LUMINOUS PER WATTS

lm/W

BEAM ANGEL

RCF 10W LED

220V -50Hz WARM WHITE 2700 850 85 120°

220V -50Hz WARM WHITE 3000 900 90 120°

220V -50Hz WARM WHITE 3500 930 93 120°

220V -50Hz NEUTRAL WHITE 4000 950 95 120°

220V -50Hz COOL WHITE 5000 1000 100 120°

RCF 15W LED

220V -50Hz WARM WHITE 2700 1275 85 120°

220V -50Hz WARM WHITE 3000 1350 90 120°

220V -50Hz WARM WHITE 3500 1395 93 120°


220V -50Hz COOL WHITE 5000 1500 100 120°

RCF 20W LED

220V -50Hz WARM WHITE 2700 1700 85 120°

220V -50Hz WARM WHITE 3000 1800 90 120°

220V -50Hz WARM WHITE 3500 1860 93 120°


220V -50Hz COOL WHITE 5000 2000 100 120°

OPTIONAL EXTRAS

APPLICATIONS

GARDEN SPIKE - FOR GARDEN LIGHTING

BUILT IN DAY/NIGHT SWITCH

SPARES - LED CHIP/HOLDER/THERMAL PAD

BODY OPTIONS

MATERIAL

MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, 316 MARINE GRADE STAINLESS STEEL FASTNERS/SCREWS, IP65 NEOPRENE GASKET,COMPACT DIMENTIONS (230mm X 220mm X85mm), LOW MASS

1.5KG


1.5KG


1.5KG

LENSOPTIONS

MATERIAL

MAINTENANCE FRIENDLY CLIP ORIENTATED LENS, MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, IDEAL FOR GENERAL LIGHTING / SIGNAGE & BILLBOARD LIGHTING / GARDEN LIGHTING




Innovative design, simplicity and quality materials are combined to produce a range of efficient, economical and highly practical industrial Hi-Bay lighting fixtures for use with HID lamps.

• Control Gear Housing Constructed from aluminium extruded sections (natural anodised to 15 microns) for maximum protection against corrosion. Use of aluminium ensures maximum cooling.

• End caps made of injected moulded fibre glass re-enforced nylon.• Reflector Is spun high purity aluminium, chemically brightened and

anodised.• Photometric data On application

• Control Gear Housing IP54

ENERGY SAVERHI-BAY

CATALOGUE NO. LAMP TYPERB250 HPS/MH 250W H.P Sodium/M Halide

RB400 HPS/MH 400W H.P Sodium/M Halide

RB250 MV 250w Mercury Vapour

RB400 MV 400w Mercury Vapour

RB500 MB (E40) E40 ENERGY SAVER CFL

Designed for use with H.I.D lamps in industrial applications with mounting heights between 3 and 5m. Also used extensively by service stations for lighting the petrol pump forecourts.

• Body can be supplied either in aluminium or mild steel. In both cases the metalwork is epoxy powder coated white.

• Specially designed stepped high purity aluminium reflector provides wide light distribution at low mounting heights. A totally enclosed version in 316 Marine Grade stainless steel with special ‘breathing’ holes which allow for the luminaire to be hosed down is also available.

• Luminaire can be totally enclosed and sealed against the ingress of dust and moisture.


MSCL250 HPS/MH/MV 250W H.P Sodium/M Halide/M Vapour

MSCL400 HPS/MH/MV 400W H.P Sodium/M Halide/M Vapour

ASCL250 HPS/MH/MV 250W H.P Sodium/M Halide/M Vapour

ASCL400 HPS/MH/MV 400W H.P Sodium/M Halide/M Vapour

The RML Lighting Rondo Mini bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U. V. stabilised injection moulded polycarbonate.

• Suitable for compact fluorescent lamps from 2 x 9watt and 16watt 2D Up to 1x26w and 2x18w.

• IP65 (neoprene gasket).• Available with built-in photocell. • Available with polycarbonate or Aluminium Base.• Depth of base: 30mm (overall depth with shallow prismatic lens: 70mm). • Base/Body colour: BLACK• Available with white, blue, green, yellow, black and red trim-rings• Available with opal dome, shallow/deep prismatic and birds-eye lens covers. • Optional RED Prismatic lens


RBH/1XE27 1X E27

RBH/2XE27 2X E27

RBH/1XPL9 1X PL9 CFL






RBH/16W2D 1X 16W 2D CFL


RBH/13WLED 1X 13W LED

RBH/16W/LED 1X 16W LED

Red Prismatic lens

Trim ring colours

The RML Lighting SLIMLINE bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U.V. stabilised injection moulded polycarbonate.

• Suitable for compact fluorescent lamps from 2 x 9watt and 16watt 2D • IP65 (neoprene gasket) • Available with built-in photocell • Can be fitted with clear prismatic lens or flat opal lens • Depth of base: 30mm.• Base colour: White• Trim rings available in White and Black.

CLEARLENS

OPAL LENS


RSB/ES/BE/W E27 Energy Saver

RSB/2PL9/BE/W 2 X PL9W

RSB/16W2D/BE/W 16W 2D

The RML Lighting SLIMLINE bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U.V. stabilised injection moulded polycarbonate.

• 13W & 16W LED Panel.• IP65 (neoprene gasket). • Available with built-in photocell.• Can be fitted with Clear Birdseye lens or Flat Opal lens. • Depth of base: 30mm.• Total Diameter : 236mm• Base colour: White• Trim rings available in White & Black.

CATALOGUE NO. TYPE

RSB/16WLED/FO/W 16W LED OPAL LENS

RSB/16WLED/BE/W 16W LED CLEAR LENS

RSB/13WLED/FO/W 13W LED OPAL LENS

RSB/13WLED/BE/W 13W LED CLEAR LENS

13W LED PANEL

• Input Voltage:220-240v• Frequency: 50/60Hz• Rated Current: 0.12A • Colour Temp: 5700k (Daylight)• Lumen Output: 1400lm

16W LED PANEL

• Input Voltage:220-240v• Frequency: 50/60Hz• Rated Current: 0.135A • Colour Temp: 5700k (Daylight)• Lumen Output: 1750lm

RONDO MAXI BULKHEAD

FEATURES

These extremely versatile range of bulkhead luminaires are aesthetically pleasing, rugged and practical. Injection moulded in U.V. stabilised Polycarbonate with two types of diffuser and trim rings available in different colours. They may be equipped for use with a variety and combination of compact fluorescent lamps. All versions are suitable for side or back cable entry. They feature an enclosed gear compartment to conceal wiring and ballast. The compartment is designed to house and conceal emergency lighting gear if required.

• Suitable for compact fluorescent lamps up to 32w 2D, 2x18w and 2x26w.

• IP65 (neoprene gasket) • Available with built-in photocell.• Can be fitted with prismatic or opal diffusers. • Trim ring colours: white and black. • Gear compartment suitable for emergency lighting.

• Wattage ranges from 10W/20W/30W/50W.• Die-cast aluminium housing with UV Stabilized Poly

Carbonate Cover.• Fasteners made from stainless steel.• Voltage: 190 -250V AC.• Colour Temperature: 6000K (95lm/w)• UV Stabilized, Shock Proof Lens.• Beam Angle 120° x 90°• Ingress Protection grade: IP65. (Special TU Gasket)• LED lifespan: 50000HOURS.• Built in Surge Protection• 2mm thick, 360° Rotatable Bracket.• Available in Black as a Standard• Useful applications include general outdoor lighting, garden

lighting, billboard and sign lighting as well as building facades and car parks.

10w

30w 50w

20w

Model Voltage Beam Angle WattageRSP/LED10W AC 190V - 250V 90° X 120° 10W

RSP/LED20W AC 190V - 250V 90° X 120° 20W

RSP/LED30W AC 190V - 250V 90° X 120° 30W

RSP/LED50W AC 190V - 250V 90° X 120° 50W

Size PF CRI Lumens121mm x 90mm x 36mm > 0.95 > 80 950

155mm x 115mm x 45mm > 0.95 > 80 1900

190mm x 140mm x 59mm > 0.95 > 80 2850

245mm x 180mm x 70mm > 0.95 > 80 4750

New SMD2835 LED ChipFocused lens 120° x 90°95 LM/W

Bilateral Water Outlets, Plus Special TU Designed Waterproof Gasket IP>65

Lasered Logo

Black, UV Stabilized, PC Cover . (Also Available in White on Special Request)

Sloped Cable Gland, protects Cable and Improves Waterproofing

2mm Thick Bracket, 360° Rotatable

Curved Body Design Increases Heat Area and Gives Unique Visual Effect

Depression Screws Will Prevent Scratching

Built in Surge Protection

30

• Wattage s – 100w and 200w • Die-cast aluminium housing • Fasteners made from stainless steel.• Voltage: 190 -250V AC.• Colour Temperature: 6000K (95lm/w)• UV Stabilized, Shock Proof Lens.• Beam Angle 110° x 90°• Ingress Protection grade: IP65. (Special TU Gasket)• LED lifespan: 50000HOURS.• Built in Surge Protection• 2mm thick, 360° Rotatable Bracket.• Available in Black only.• Useful applications include general outdoor lighting, garden

lighting, billboard and sign lighting as well as building facades and car parks.

31

Wattage A B C D E100 Watt 414 mm 57 mm 235 mm 380 mm 200 mm

200 Watt 414 mm 57 mm 380 mm 380 mm 350 mm

Model Wattage Voltage PF CRI Lumens Beam AngleRSP/LED100W 100 Watt AC 190V - 250V > 0.99 > 80 9500 90° X 110°

RSP/LED200W 200 Watt AC 190V - 250V > 0.99 > 80 19000 90° X 110°

32

• One piece captive double-action snap lock poly carbonate clips securing the diffuser are standard.

• Stainless steel clips can be provided upon request.• Available with both magnetic and electronic control gears• High purity aluminium, stainless steel suspension brackets and quick

installation.• White painted metal control gear tray, easily removed by two integral

snap lock devices.• Available ranges : 5FT 58W single /double

4FT 36W single /double2FT 18W double only

Now also wired for T8 LED Tubes

CATALOGUE NO. LAMP TYPERDHP/2X18/P - E.C.G 2X18W T8 Fluorescent

RDHP/1X36/P - E.C.G 1X36W T8 Fluorescent

RDHP/2X36/P - E.C.G / S.START 2X36W T8 Fluorescent

RDHP/1X58/P - E.C.G 2X58W T8 Fluorescent

RDHP/2X58/P - ECG / S.START 2X58W T8 Fluorescent

RDHP/LED/P LED T8 Fluorescent

• 2 X PL9W CFL lamps• 230V maintained• Rechargeable NICAD batteries• 1x PL9W lamp will stay illuminated for 1 hour in

the case of a power failure.• Various signage can be ordered i.e.: running

man, arrows etc.• Down light component illuminating area directly

below luminaire• Dimensions: Length = 405mm X width = 225mm

X height = 65mm


EXIT 2XPL9 2XPL9W CFL

EXIT 2XPL9 + EMERGENCY 2XPL9W CFL

2 WAY EXIT 2XPL9 2XPL9W CFL

2 WAY EXIT 2XPL9 + EMERGENCY

2XPL9W CFL

The DN1 is a rugged and reliable photocell designed specifically

for the harsh conditions of streetlight switching. Years of research into common failure modes has resulted in a product that rivals the world’s best. High quality materials, high temperature electronic components and special contact material will provide years of reliable operation.

36

The DN-2 Photocell is a compact/rugged daylight switch that can

operate both compact fluorescent lamps and incandescent lamps. The unit has a long, tapered sensor tube which makes it easy to install into light fittings. Two 3mm mounting holes are also provided. The unit features a high degree of lightning protection to provide many years of trouble free operation. The DN2-L version has the sensor connected by a fly lead.

DN2

DN2+L

A wide variety of magnetic ballasts are available for both HID and Fluorescent luminaires.

We provide lighting capacitors designed for both series and parallel compensation of

fluorescent lighting ballasts, mercury, metal halide, and sodium pressure lamps. Lighting

capacitors are available in either thermoplastic or aluminium cases with a selection of

terminal configurations and mounting options

Ignitors for HID lamps 70W up to 400W.

Ignitors for HID lamps 1000W and 2000W.

CHOKES/BALLAST80W M. VAPOUR

125W M. VAPOUR

250W M. VAPOUR

400W M. VAPOUR

70W H.P SODIUM / M.HALIDE





9W - 18W CFL

20W / 26W / 36W CFL

58W CFL

1000W H.P SODIUM / M.HALIDE 220V

2000W H.P SODIUM / M.HALIDE 380V

IGNITORSMZN 400 SU

MZN 1000 SU

MZN 2000 SU

CAPACITORS

2 MFD

4 MFD

10 MFD

20 MFD

30 MFD

45 MFD

38

FORMULA:N= EAU x L x W

CU x ø x LLD x M

EAU = Lux Level RequirementL = Length of areaW = Width of areaCU = Coefficient of utilizationø = Lamp Light OutputLLD = Lamp Lumen DeteriorationM = Maintenance Factor

WATT TUBULAR (IM) ELLIPICAL (IM)

STARTING

AMPS

RUNNING

AMPS

POWER

FACTOR

CORRECTION

CAPACITOR

70 5900 5600 0.72 0.45 10 MFD

150 14500 14000 1.30 0.88 20 MFD

250 27000 25000 2.10 1.42 30 MFD

400 4800 47000 3.80 2.20 45 MFD

1000 130000 128000 8.80 5.50 100 MFD


STARTING

AMPS

RUNNING

AMPS

POWER

FACTOR

CORRECTION

CAPACITOR

70 5000 4900 0.72 0.45 10 MFD

100 1700 9500 1.00 0.75 10 MFD

150 11500 10500 1.70 0.82 20 MFD

250 19000 17000 2.80 1.42 30 MFD

400 35000 33000 3.80 2.20 45 MFD

1000 80000 - 9.60 5.20 90 MFD

2000 8.8 A 380 V 200000 - 7.20 5.90 37 MFD

2000 10.3 A 380V 225000 - 8.20 6.80 60 MFD


STARTING

AMPS

RUNNING

AMPS

POWER

FACTOR

CORRECTION

CAPACITOR

80 - 3800 0.90 0.45 10 MFD

125 - 6200 1.35 0.68 10 MFD

250 - 127000 2.10 1.35 20 MFD

400 - 22000 3.80 2.10 20 MFD

1000 - 57000 4.10 60 MFD

WATT

STARTING

AMPS

RUNNING

AMPS

POWER

FACTOR

CORRECTION

CAPACITOR

PL9 0.11 0.17 2 MFD

PL13 0.15 0.10 2 MFD

PL18 0.12 0.13 4 MFD

PL26 0.31 0.19 4 MFD

16W 2D 0.16 0.10 2 MFD

28 W 2D 0.29 0.18 4 MFD

LM

600

1800

1050

900

1200

2050

WATT

STARTING

AMPS

RUNNING

AMPS

POWER

FACTOR

CORRECTION

CAPACITOR

18W STANDARD 0.18 0.11 4 MFD



58 W STANDARD 0.61 0.38 5 MFD

1800

1200

2850

4600

41

AREA OF WORK TYPE OF WORK LUX LEVELSGeneral Engineering Rough Work 160 lux

General Engineering Medium Work 400 lux

General Engineering Fine Work 800 lux

General Engineering Very Fine Work 1600 lux

Inspection Areas Rough Work 160 lux

Inspection Areas Medium Work 320 lux

Inspection Areas Sub Assemblies 400 lux

Inspection Areas Fine Work/ High Precision Mechanical 800 lux

Office Areas Entrance Hall / Reception Area 160 lux

Office Areas General Offices/Conference Rooms 500 lux

Office Areas Computers / Machine Operating 630 lux

Office Areas Drawing 800 lux

Outdoor Areas Manual / Mechanical Loading 10 lux

Outdoor Areas Service Station Forecourts 160 lux

Warehouse Inactive Storage 20 lux

Warehouse Loading Bays / Large Material Storage 100 lux

WarehouseSmall Material Storage / Dispatch and

Packing 200 lux

TYPE OF SPORT PRACTICE LEVEL MINOR LEAGUE MAJOR LEAGUE PRO LEVELLawn Bowls 20 lux 50 lux 100 lux 150 lux

Tennis 50 lux 100 lux 150 lux 250 lux

Football/Rugby 50 lux 100 lux 250 lux 450 lux

Cricket outfield 50 lux 100 lux 250 lux 450 lux

Cricket Pitch 100 lux 200 lux 400 lux 600 lux

Hockey 50 lux 100 lux 250 lux 350 lux

Swimming 50 lux 100 lux 150 lux 250 lux

ROAD TYPE LUX LEVEL

Freeway 20 lux

Major Arterial Roads 10 lux

Aerial Roads 10 lux

Minor Arterial Roads 5 lux

Minor Suburban Roads 2 lux

Documents

luminaire approved by SABS - RML• Wall mounted without bracket (bulkhead). CATALOGUE NO. LAMP TYPE RCF 7 1 X PL7W CFL RCF 9 1 X PL9W CFL RCF 11 1 X 11W CFL RCF 13 1 X 13W CFL RCF