Embed Size (px)
Citation preview
Pitchglaze Roof WindowMaintenance Manual
2
201-OM-Pitchglaze-Maintenance-Manual-v1.0
Need assistance? 01379 658300 [email protected]
General maintenance and safety
To keep the Pitchglaze in good working order please observe the following points:
• Do not walk or sit on the unit• A general inspection should be carried out on the unit wherever possible at least once every 6 months. • Keep the frame clear of general dirt and debris.• Do not use any abrasives or aggressive cleaners on the painted framework or glass of the unit as this
mayaffectthefinishes.
Service contract
Extended Service and Maintenance contracts are available from Glazing Vision to ensure optimal performance, please contact us on 01379 658300 or [email protected] for further details.
Cleaning
There should be no water ponding anywhere on the product when installed correctly. Any standard glass-cleaning product can be used to clean the glass unit. However take care not to use abrasive materials or cleanersasthismayaffecttheunitanditsfinish.Theframeworkoftheunitcanbecleanedusingwarmsoapywaterwithasoftlintfreecloth.
Product warranty
A warranty document will be provided with the Pitchglaze or you can download from our website at:
www.glazingvision.co.uk/resources/warranties/
In the event of a breakage
In the unlikely event of a glass breakage, due to the unique method of bonding the glass unit into the frame, a new Pitchglaze would need to be supplied. Glass breakage is not covered in the product warranty unless the damage is a direct result of Glazing Vision Limited or its product failing. In the event of the glass being damaged please contact Glazing Vision for assistance.
All standard glass used in Glazing Vision products is toughened safety glass which is designed to fragment into smaller less harmfulpiecesifbroken,glassspecificationscomply with all UK Building Regulations.
Safety and Maintenance
Thank you for purchasing the Glazing Vision Pitchglaze, we hope that it provides many years of service.Please follow the information in this guide to ensure optimum performance of your new roof window, should you have any queries beyond the scope of this manual, please don’t hesitate to contact us.
3
201-OM-Pitchglaze-Maintenance-Manual-v1.0
Need assistance? 01379 658300 [email protected]
Formore,refertotheseparatedeclarationofperformancedocumentation,orseethemarkingaffixedtothePitchglaze.
EN 14351-1:2006+A1:2010
There are no hazardous materials used in the construction of the Pitchglaze unit. When disposing of the unit, please recycle wherever possible.
The following materials are used throughout the unit:
• Aluminium sheets and angles• Polyesterpowdercoatedfinish• Low modulus silicone• PVC foam tape• Polyethylene backing rod• Polyurethane adhesive (glass to frame)• Butyl tape (frame to frame)• Toughened glass panes• Aluminium spacer bar• PVB laminate interlayer (laminated units only)
For technical support please call01379 658300
or visit us atwww.glazingvision.co.uk/resources or email us [email protected]
Conformity
COSHH and Safe Disposal
