Upload
ngoquynh
View
215
Download
0
Embed Size (px)
Citation preview
The VMAX 250F kept latency under 1 ms when simultaneously processing transactional and data mart loading, with minimal impact to the number of input/output operations per second (IOPS).
Manage transactional and data mart loads with superior performance and high availability
We set up and tested All-Flash storage arrays from Dell EMC™ and HPE and found that the Dell EMC VMAX™ 250F All Flash storage array paired with PowerEdge™ servers came out ahead of the HPE 3PAR 8450 storage array backed by ProLiant servers in two key areas:
Get all the facts at DellEMC.com/Choose-VMAX
®
Copyright 2017 Principled Technologies, Inc. Based on “Manage transactional and data mart loads with superior performance and high availability,” a Principled Technologies report, September 2017. Principled Technologies® is a registered trademark of Principled Technologies, Inc. All other product names are the trademarks of their respective owners.
Support customers and maintenance situations at the same time
We interrupted access to both local storage arrays—the Dell EMC database host seamlessly redirected all I/O to the remote VMAX 250F via SRDF/Metro with no interruption of service or downtime. The 3PAR solution crashed until the standby paths became active and we restarted the VM.
Load balancing Redundancy support
Active paths to both sites
No downtime
Prevent unexpected downtime with reliable failover protection
SRDF/Metro benefits
Dell EMC 99,506
99,284HPE
Dell EMC 96,619
69,263HPE
Average IOPs before data mart Average IOPs during data mart
1.02ms
0.76ms 0.79ms
0.86ms 2.33ms
0.95ms
19.28ms
0.93ms
HPE
Average latency before data mart Average latency during data mart
READ READWRITE WRITE
Dell EMC
Wait times unnoticable
Minimal impact from data mart load