MANF 9543 - Computer-Aided-Design and Manufacture Group – 9 Zheng Wang Syamil Zakaria Essam Alsaleem Kong Wang Md Nahid Parvez Group – 9 Instructor Mr. Jürgen Schleppi Assignment 2 - Redesigning a given a product by applying engineering design approach to create the conceptual design and CAD for detail design CAM for assessing the production feasibility
1. Group 9 Zheng Wang Syamil Zakaria Essam Alsaleem Kong Wang
Md Nahid Parvez Group 9 Instructor Mr. Jrgen Schleppi
2. Maximum Opening Limited to 65mm No Provision for Replaceable
Jaws Long Securing Time Volumetric Constraints: Within
150x400x100mm (width x length x height) Provision for Maximum
Opening: 100mm - Rapid Securing Time - Eliminate Drawbacks of the
Original Design No Provision for adding replaceable jaw faces
3. Initial Concept Concept Evaluation & Embodiment Design:
A: We concerned about this section as this was not a strong design
B: Unnecessary slot Final Design Concept Back JawHandle Moveable
Middle Jaw
4. Minimum tool Variance Total Manufacturing Time: Around 4.5
Hours
5. We kept machining in the redesign vice to meet with the
current machining setup of TORMACH INC as the machining in our
design matches with other existing designs of TORMACH. Our Design
meets the Design Objectives. Around $ 230- $ 250