Upload
lynhu
View
241
Download
3
Embed Size (px)
Citation preview
For CAT®** Mini Excavators and Backhoe LoadersMANUAL MINI COUPLER
The JRB Manual Mini Couplers, by Paladin, provide increased flexibility to operate multiple attachments on a single excavator or backhoe loader.
• Easily allows operator to change attachments and gain back lost productivity from knocking out pins
• Attachment changes are faster and safer • Spring loaded locking mechanism with integrated
non-removable locking pin
• Works in both backhoe and face positions
• Clear visibility of locking mechanism aids secure attachment
• Cast Manual couplers for 1-5 ton mini-excavators, backhoe loader coupler (CAT only)
Manual Mini Coupler Features
• Strong, lightweight cast design minimizes effect on machine performance
• Manufactured with a process utilizing high grade steel to produce a lighter, stronger and more durable design
• Cast design provides additional strength in the specific areas that require it, while minimizing weight in areas that are not load bearing
• The lighter weight improves machine efficiency and reduces fuel consumption
• Can be welded if necessary
• The base of the hook is flat to stop engagement of the attachment from the operators cab, forcing operator to install the locking pin as part of future ISO13031 regulation
MANUAL MINI COUPLERS
Access point for coupler operating handle
Non-removable locking pin - prevents loss of pin and ensures operators need to visit coupler as part of the release/
attach process required as part of future ISO 130131 regulation
Strong, durable, high tensile precision steel cast design frame
JRB Manual Quick Coupler - Top View
Non-Removable Locking Pin
Attachment Pins
Compression Spring
Pin Bolts
Lynch Pin
Coupler Operating Handle
For CAT®** Mini Excavators and Backhoe Loaders
Step 1: Remove lynch pin and slide locking pin out to the hook release position. Lower the coupler and engage front bucket pin.
Step 2: Lift the bucket slightly off the ground. Rotate bucket towards cab until the back bucket pin bears against the hook. Insert the coupler operating handle into the hole at the back of the coupler.
Step 3: Press down on the coupler operating handle to open the hook. The weight of the bucket drives the back bucket pin into the back socket of the coupler. Engage the hook by taking pressure off the coupler operating handle. Remove the coupler operating handle.
Step 4: Slide the non-removable locking pin into the coupler and secure in place using the lynch pin (see insert)
Step 5: Check that the bucket pins are securely held by the coupler. Apply pressure to the bucket by rotating it against the ground and away from the machine.
Step 1: Raise the bucket slightly off the ground and slightly angle bucket teeth towards the ground - this will allow the bucket to rotate away from the rear pin after the coupler operating handle has released the hook. Remove the lynch pin which secures the non-removable locking pin. Slide the locking pin out to the hook release position.
Step 2: Insert the coupler operating handle into the hole at the back of the coupler.
Step 3: Press down on the coupler operating handle to disengage the hook and release the rear bucket pin. The bucket will swing forward on the front bucket pin. Caution: the bucket is now engaged by the front pin only and may fall. Remove the coupler operating handle.
Step 4: Lower bucket to the ground. Rotate coupler away from the cab to release the front bucket pin.
www.paladinattachments.com
Easy Engagement and Release of Attachments5 Easy Steps to Engage Attachment 4 Easy Steps to Release Attachment
JRB-
Min
i Ex C
oupl
ers 0
5-14
© 2
014
Pala
din
Pow
erfu
l Atta
chm
ent T
ools
|| PH: 800.456.7100 || www.paladinattachments.com || Connect with Paladin:
MANUAL MINI COUPLERS
JRB Manual Mini Excavator/Backhoe Loader Coupler- Range
* The front and rear of the coupler on the attachment side are different widths.
Manual Couplers for Caterpillar Backhoe Loaders
Includes attachment pins and hardware
Range A (Class 10)
416, 417, 420, 428, 430, 438
Part Number 93C0094
Coupler Weight 150 lbs/68kg
Minimum Attachment Width AW* AW-Link = 8.1" (206mm)AW-Stick = 10.1" (256mm)
Pin Diameter D 1.97" (50mm) & 1.77" (45mm)
Pin Spread PS 13.6" (345mm)
Coupler Vertical Offset Vo 5.75" (146mm)
Coupler Horizontal Offset Ho 4.41" (112mm)
Hook (Shell) Clearance**(in) Measurement is radius from pin center HC 2.83" (72mm)
Box Section Clearance**(in) Measurement is radius from pin center BC 3.23" (82mm)
Manual Couplers for Caterpillar Mini Excavators
Includes attachment pins and hardware
Range N (300 Mini)
Range O (300 Mini)
Range P (300 Mini)
Range R (400 Mini)
301.4C, 301.4D, 301.5, 301.6C, 301.7D, 301.8C
302D, 302.4D, 302.5, 302.5C,
302.7D
303CR, 303.5CCR, 303.5D, 304D, 303.5E, 304E
304.5 (old model)
304CCR, 305CCR, 305D, 305.5D, 305E, 305.5E
Part Number 93C0087 93C0088 93C0089 93C0090 93C0091
Coupler Weight 29lbs/13kg 42lbs/19kg 53lbs/24kg 99lbs/45kg 112lbs/ 51kg
Minimum Attachment Width AW* 4.11"(104.5mm) 5.33" (135.5mm) 5.33" (135.5mm) 6.12"
(155.5mm)6.12"
(155.5mm)
Pin Diameter D 1.18" (30mm) 1.38" (35mm) 1.57" (40 mm) 1.57" (40 mm) 1.77" (45mm)
Pin Spread PS 5.05" (126.5mm) 6.49" (165mm) 7.87" (200mm) 10.23" (260mm) 10.26" (260.5mm)
Coupler Vertical Offset Vo 1.80" (45.6mm) 2.26" (57.5mm) 2.0" (50.9mm) 2.36" (59.9mm) 3.54" (90mm)
Coupler Horizontal Offset Ho 2.78" (70.7mm) 3.36" (85.4mm) 3.55" (90.1mm) 3.47" (88.2mm) 5.87" (149mm)
Hook (Shell) Clearance**(in) Measurement is radius from pin center HC 1.85" (47mm)" 1.97" (50mm) 2.61" (55mm) 2.44" (62mm) 2.75" (70mm)
Box Section Clearance**(in) Measurement is radius from pin center BC 1.77" (45mm) 2.09" (53mm) 2.48" (63mm) 2.44" (62mm) 2.28" (58mm)
AW - LinkAW -Stick PSBC
HCHo
Vo
D
AW BC PSHC
D
Ho
Vo
Backhoe Loader Couplers
Mini Excavator Couplers
**CAT is a registered trademark of Caterpillar.