MASONRYDRILL BITS

Catalog # Size Usable Length

Std.Pack

SDS PLUS 5322 5/32” x 4 1/4” 2” 1

SDS PLUS 5324 5/32” x 6 1/4” 4” 1

SDS PLUS 3162 3/16” x 4 1/4” 2” 1

SDS PLUS 3164 3/16” x 6 1/4” 4” 1

SDS PLUS 3166 3/16” x 8 1/4” 6” 1

SDS PLUS 31610 3/16” x 12” 10” 1

SDS PLUS 7324 7/32” x 6 1/4” 4” 1

SDS PLUS 7326 7/32” x 8 1/4” 6” 1

SDS PLUS 142 1/4” x 4 1/4” 2” 1

SDS PLUS 144 1/4” x 6 1/4” 4” 1

SDS PLUS 146 1/4” x 8 1/4” 6” 1

SDS PLUS 149 1/4” x 11” 9” 1

SDS PLUS 5164 5/16” x 6 1/4” 4” 1

SDS PLUS 51610 5/16” x 12” 10’ 1

SDS PLUS 384 3/8” x 6 1/4” 4” 1

SDS PLUS 386 3/8” x 8 1/4” 6” 1

SDS PLUS 388 3/8” x 10 1/4” 8” 1

SDS PLUS 3810 3/8” x12 1/4” 10” 1

SDS PLUS 124 1/2” x 6 1/4” 4” 1

SDS PLUS 128 1/2” x 10 1/4” 8” 1

SDS PLUS 1210 1/2” x 12 1/4” 10” 1

SDS PLUS 1216 1/2” x 18” 16” 1

SDS PLUS 126 1/2” x 8 1/4” 6” 1

SDS PLUS 9164 9/16” x 6 1/4” 4” 1

SDS PLUS 584 5/8” x 6 1/4” 4” 1

SDS PLUS 586 5/8” x 8” 6” 1

SDS PLUS 5810 5/8” x 12” 10” 1

SDS PLUS 346 3/4x8x6Carbide Bit

6 1

SDS PLUS 3410 3/4x12x10 Carbide Bit

8 1

SDS PLUS 7810 7/8” x 12 1/2” 10” 1

SDS PLUS 118 1” x 10” 18” 1

SDS PLUS 110 1x12x10Carbide Bit

10 1

Catalog # Size Usable Length

Std.Pack

SDS PLUS 43162 3/16" x 4 1/4" 4C 2" 1

SDS PLUS 43164 3/16" x 6 1/4" 4C 4" 1

SDS PLUS 43166 3/16" x 8 1/4" 4C 6" 1

SDS PLUS 4142 1/4" x 4 1/4" 4C 2" 1

SDS PLUS 4144 1/4" x 6 1/4" 4C 4" 1

SDS PLUS 4146 1/4" x 8 1/4" 4C 6" 1

SDS PLUS 4148 1/4" x 10" 4C 8" 1

SDS PLUS 41410 1/4" x 12" 4C 10" 1

SDS PLUS 45164 5/16" x 6 1/4" 4C 4" 1

SDS PLUS 4384 3/8" x 6 1/4" 4C 4" 1

SDS PLUS 43810 3/8" x 12 1/4" 4C 10" 1

SDS PLUS 43816 3/8" x 18" 4C 16" 1

SDS PLUS 4124 1/2" x 6 1/4" 4C 4" 1

SDS PLUS 41210 1/2" x 12 1/4" 4C 10" 1

SDS PLUS 41216 1/2" x 18" 4C 16" 1

SDS PLUS 4586 5/8x10x8 Carbide Bit 4C

8 1

SDS PLUS 45816 5/8x18x16 Caride Bit 4C

16 1

SDS PLUS 4348 3/4x10x8 Carbide Bit 4C

8 1

SDS PLUS 43416 3/4x18x16 Carbide Bit 4C

16 1

SDS PLUS 4788 7/8x10x8 Carbide Bit 4C

8 1

SDS PLUS 47816 7/8x18x16 Carbide Bit 4C

16 1

SDS PLUS 418 1x10x8 Carbide Bit 4C

8 1

SDSPLUS 4116 1x18x16 Carbide Bit 4C

16 1

SDS PLUS 41188 11/8x10x8 Carbide Bit 4C

8 1

SDS PLUS 411416 11/4x18x16 Carbide Bit 4C

16 1

SDS-Plus SDS PLUS “4 Claw”(4 Cutting Edges)

Use InRotary Hammer with SDS chuck or SDS adapterSize Range5/32"x6" to 1"x10"

SDS-Plus Masonry Drill Bits are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill concrete, block, brick and soft stone. Made in Germany.

Quad Head SDS-Plus® Carbide Drill Bits are designed to reduce vibration and noise. These bits produce rounder and more accurately located anchor holes. Made in Germany.

Catalog # Size Usable Length

Std.Pack

SDS PLUS 5324BP 5/32" x 6 1/4" 4" 25

SDS PLUS 3164BP 3/16" x 6 1/4" 4" 25

SDS PLUS 144BP 1/4" x 6 1/4" 4" 25

SDS PLUS 5164BP 5/16" x 6 1/4" 4" 25

SDS PLUS 384BP 3/8" x 6 1/4" 4" 25

Catalog # Size Usable Length

Std.Pack

SDS PCS532238 5/32x5x2-3/8 Concrete Screw Bit

2 3/8 1

SDS PCS532318 5/32x6x3-1/8 Concrete Screw Bit

3 1/8 1

SDS PCS532418 5/32x7x4-1/8 Concrete Screw Bit

4 1/8 1

SDS PCS316238 3/16x5x2-3/8 Concrete Screw Bit

2 3/8 1

SDS PCS316318 3/16x6x3-1/8 Concrete Screw Bit

3 1/8 1

SDS PCS316418 3/16x7x4-1/8 Concrete Screw Bit

4 1/8 1

SDS-Plus Bulk Packs(25 Per Pack)

SDS PLUS CS Bits

Catalog # Size Usable Length

Std.Pack

SDS MAX 12712* 1/2" x 13" 7 1/2" 1

SDS MAX 1212* 1/2x 7x12 Carbide Bit

12 1

SDS MAX 121512* 1/2" x 21" 15 /12" 1

SDS MAX 458712 5/8" x 13" 4C 7 1/2" 1

SDS MAX 4581512 5/8" x 21" 4C 15 1/2" 1

SDS MAX 4583012 5/8x36x30-1/2 Carbide Bit 4C

30 1/2 1

SDS MAX 4348 3/4" x 13" 4C 8" 1

SDS MAX 43417 3/4" x 21" 4C 17" 1

SDS MAX 43431 3/4x36x31 Carbide Bit 4C

31 1

SDS MAX 4788 7/8" x 13" 4C 8" 1

SDS MAX 47817 7/8" x 21" 4C 17" 1

SDS MAX 418 1" x 13" 4C 8" 1

SDS MAX 4117 1" x 21" 4C 17" 1

SDS MAX 4131 1x36x31 Carbide Bit 4C

31 1

SDS MAX 411812 11/8" x 17" 4C 12" 1

SDS MAX 411817 11/8" x 21" 4C 17" 1

SDS MAX 411410 11/4" x 15" 4C 10" 1

SDS MAX 411418 11/4" x 23" 4C 18" 1

SDS MAX 411431 11/4" x 36" 4C 31" 1

SDS MAX 413818 13/8x23x18 Carbide Bit 4C

18 1

SDS MAX 411218 11/2x23x18 Carbide Bit 4C

18 1

SDS MAX 413418 13/4x23x18 Carbide Bit 4C

18 1

SDS Max “4 Claw”Use InRotary Hammer with Spline chuckSize Range1/2"x13" to 1 1/2"x23"

SDS-Max® Masonry Drill Bits are designed for use in a rotary hammer equipped with a SDS-Max® chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill concrete, block, brick and soft stone. Made in Germany.

*1/2" x 13" & 1/2" x 21" sizes are 2 Cutting Edges

SDS Plus CS (Concrete Screw) Drill Bits in the diameters listed are nominal size of 5/32" & 3/16" and are used with 3/16" and 1/4" "Concrete Screws" as a matched tolerance system.

Catalog # Size Usable Length

Std.Pack

SPLINE 4585 5/8" x 10" 4C 5" 1

SPLINE 45811 5/8" x 16" 4C 11" 1

SPLINE 45817 5/8" x 22" 4C 17" 1

SPLINE 4345 3/4" x 10" 4C 5" 1

SPLINE 43411 3/4" x 16" 4C 11" 1

SPLINE 43417 3/4" x 22" 4C 17" 1

SPLINE 47811 7/8" x16" 4C 11" 1

SPLINE 47817 7/8" x 22" 4C 17" 1

SPLINE 4111 1" x 16" 4C 11" 1

SPLINE 412217 1" x 22" 4C 17" 1

SPLINE 411411 1 1/4" x 16" 4C 11" 1

SPLINE 411417 1 1/4" x 22" 4C 17" 1

SPLINE 411217 1 1/2" x 22" 4C 17" 1

SPLINE 413418 1 3/4" x 23" 4C 18" 1

SPLINE 4218 2" x 23" 4C 18" 1

Spline “4 Claw”(4 Cutting Edges)Use InRotary Hammer with SDS chuck or SDS adapterSize Range5/8"x10" to 2"x23"

Spline Carbide Drill Bits are designed for use in a rotary hammer equipped with a spline type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block brick, and soft stone. Both 4-X Cutter and single tip head styles are available.Made in Germany.

Catalog # Size Usable Length

Std.Pack

SPLINE 385 3/8" x 10" 5" 1

SPLINE 388 3/8" x 13" 8" 1

SPLINE 3811 3/8" x 16" 11" 1

SPLINE 125 1/2" x 10" 5" 1

SPLINE 128 1/2" x 13" 8" 1

SPLINE 1211 1/2" x 16" 11" 1

SPLINE 1217 1/2" x 22" 17" 1

SPLINE 585 5/8" x 10" 5" 1

SPLINE 5811 5/8" x 16" 11" 1

SPLINE 5817 5/8" x 22" 17" 1

SPLINE 3411 3/4" x 16" 11" 1

SPLINE 3417 3/4" x 22" 17" 1

SPLINE 7811 7/8" x 16" 11" 1

SPLINE 111 1" x 16" 11" 1

SPLINE 11817 1 1/8" x 22" 17" 1

SPLINE 11417 1 1/4" x 22" 17" 1

SPLINE 11217 1 1/2" x 22" 17" 1

SplineUse InRotary Hammer with Spline chuckSize Range3/8"x10" to 1 1/2"x22"

Spline Carbide Drill Bits are designed for use in a rotary hammer equipped with a spline type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block brick, and soft stone. Both 4-X Cutter and single tip head styles are available. Made in Germany.

HD - Straight ShankUse InHammer DrillSize Range1/8"x3" to 3/4"x24"

Heavy Duty Straight Shank Carbide Bits are designed for use in a hammer drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards and can be used to drill in concrete, block, brick and sodt stone.Made in Germany.

SDS Plus DC (Depth Control) Bits in the diameters listed are used in the installation process with 1/4", 3/8" and 1/2" drop-in type fasteners.

Catalog # Size Usable Length

Std.Pack

HD 18138 1/8" x 3" 1 3/8" 1

HD 5324 5/32" x 6" 4" 1

HD 532138 5/32" x 3" 1 3/" 1

HD 3161916 3/16" x 3 1/2" 1 9/16" 1

HD 3164 3/16" x 6" 4" 1

HD 14218 1/4" x 4" 2 1/8" 1

HD 144 1/4" x 6" 4" 1

HD 516234 5/16" x 4 3/4" 2 3/4" 1

HD 5164 5/16" x 6" 4" 1

HD 51610 5/16" x 12" 10" 1

HD 384 3/8" x 6" 4" 1

HD 3810 3/8" x 12" 10" 1

HD 124 1/2" x 6" 4" 1

HD 1210 1/2" x 12" 10" 1

HD 58312 5/8" x 6" 3 1/2" 1

Catalog # Size Usable Length

Std.Pack

STOP381116 3/8x1-1/16 Stop Bit

1 1/16 1

STOP121316 1/2x13/16 Stop Bit

13/16 1

STOP1211116 1/2x1-11/16 Stop Bit

1 11/16 1

STOP581116 5/8x1-1/16 Stop Bit

1 11/16 1

STOP582116 5/8x2-1/16 Stop Bit

2 1/16 1

Stop Bits

Distributed by: Lackmond Products, Inc. | 1590 North Roberts Road, Suite 101, Kennesaw, GA 30144

beastblades.com