KONTI X 600 BalerJ-Series
M A T E R I A L P R O C E S S I N G
KADANT PAAL LLC
Kadant PAAL’s Konti X channel baler features high throughput and
bale weights with low energy consumption.
Kadant PAAL was founded in 1854 in Osnabrück, Germany. Since
its introduction of the first continuously operated horizontal
baler in 1960, PAAL has delivered more than 31,000 machines and
today is the #1 channel baler manufacturer in Europe.
KONTI X J-Series Baler Overview
Features
• Additional horizontal tying system for difficult materials
• Optimized knife, stamper, and channel design
• Modern axial piston pumps with low drive power
• Advanced positional ram measurement system
• Large door at rear section of baler
• Improved app-oriented operator interface and PLC with remote
maintenance
Benefits
• High throughput and bale weights
• Low energy consumption
• Simple operation and maintenance
• Low total cost of ownershipPAAL™B R A N D
PAAL™B R A N D
PAAL™B R A N D
PAAL™B A L E R S
Specifications are for reference only and subject to change.
KADANT PAAL LLC1425 Kingsview Drive KONTI X 600 Baler
J-Series-1000 (US) 07/2020Lebanon, Ohio 45036 Tel: +1 513-229-8199
NewUnited States www.kadantpaal.com © 2020 Kadant PAAL LLC
Technical Data and Measurements
KONTI X 600 Baler J-Series
Pressing force US ton 174
Spec. pressing force psi 186
Hydraulic reference pressure psi 4560
Tunnel cross section H x W inch 44 x 44
Hopper opening inch 79 x 41
Feeding volume ca.yd3 4.51
Number of wires (Vertical / Horizontal) pieces 5 / 4
Driving power HP 2 x 50 2 x 60 2 x 74 2 x 100 3 x 74 3 x 100
Hydraulic pump flow gal/min 2 x 69 2 x 69 2 x 111 2 x 111 3 x
111 3 x 111
Oil reservoir capacity gal 330 330 555 555 820 820
Maximum performance without material max.yd3/h 825 825 1220 1220
1658 1658
Press Capacity (Weight)
• 0.94 lb/ft3 (e.g. foil) ca. US t/h 7 7 10 11 14 15
• 2.18 lb/ft³ (e.g. flattened OCC) ca. US t/h 15 17 22 25 31
35
• 3.75 lb/ft³ (e.g. mixed paper) ca. US t/h 25 27 36 41 50
57
• 5 lb/ft³ (e.g. mixed paper) ca. US t/h 32 35 46 52 63 71
• 6.3 lb/ft³ (e.g. newspaper, magazines) ca. US t/h 37 41 53 61
71 80
Baler weight (dependent on options) US tons 55
Sound level without material at 1 m distance dB(A) < 85
A B C D E G H I K M N P Q1 Q2 R
46’ 5” 8’ 11” 18’ 6” 6’ 7” 21’ 9” 25’ 21’ 4” 10’ 10” 2’ 13’ 8”
3’ 4” 3’ 7” 5’ 4” 4’ 6” 11’ 1”
Dimensions are in feet and inches
