7/28/2019 ME2306 (1)

1/4

DOC/LP/01/28.02.02

Objective:

To acquire practical knowledge on working principles and performance evaluation ofinternal combustion engines and simple steam power plant. Also to gain knowledge ondetermination of viscosity and flash and fire points of given oil.

Sl.No List of Experiments

Time

CYCLE-I

1

Obtaining Valve timing diagram of a four stroke engine and

Port timing diagram of a two stroke engine 150 min

2Performance test on a single cylinder slow speed dieselengine fitted with mechanical dynamometer

150 min

3Heat balance test on a Twin cylinder high speed diesel enginefitted with hydraulic dynamometer

150 min

4Morse test on a multi-cylinder petrol engine fitted with eddycurrent dynamometer

150 min

5Retardation test on a single cylinder high speed diesel enginefitted with mechanical dynamometer

150 min

6

(a) Determination of viscosity of a given lubrication oilusing Red-Wood viscometer

(b) Determination of flash and fire point of a given fuel oil

using Open-cup apparatus

150 min

CYCLE-II

7Performance test on a single cylinder high speed dieselengine fitted with electrical dynamometer

150 min

8 Study of steam generators and steam turbines 150 min

9Determination of dryness fraction of steam using steamcalorimeter

150 min

9 Performance test on a steam generator 150 min

10 Energy balance test on a steam generator 150 min

11Performance test on steam turbine

150 min

12 Revision 150 min

DOC/LP/01/28.02.02

LESSON PLAN

LP: ME2306

Revision No: 00

Date: 15-06-2010

Page 1 of 4

Sub Code&Name: ME2306-Thermal Engineering Lab-I

Branch: Mechanical Engineering Semester: V

7/28/2019 ME2306 (1)

2/4

LESSON PLAN

LP: ME2306

Revision No: 00

Date: 15-06-2010

Page 2 of 4

Sub Code&Name: ME2306-Thermal Engineering Lab-I

Branch: Mechanical Engineering Semester: V

A Batch

CYCLE- I

Session/week A1 A2 A3 A4 A5 A6

1 1 2 3 4 5 6

2 2 3 4 5 6 1

2 3 4 5 6 1 2

4 4 5 6 1 2 3

5 5 6 1 2 3 46 6 1 2 3 4 5

CYCLE-II

Session/week A1 A2 A3 A4 A5 A6

7 7 8 9 10 11 12

8 8 9 10 11 12 7

9 9 10 11 12 7 8

10 10 11 12 7 8 9

11 11 12 7 8 9 10

12 REVISION

DOC/LP/01/28.02.02

7/28/2019 ME2306 (1)

3/4

LESSON PLAN

LP: ME2306

Revision No: 00

Date: 15-06-2010

Page 3 of 4

Sub Code&Name: ME2306-Thermal Engineering Lab-I

Branch: Mechanical Engineering Semester: V

B BATCH

CYCLE- I

Session/week B1 B2 B3 B4 B5 B6

1 1 2 3 4 5 6

2 2 3 4 5 6 1

2 3 4 5 6 1 2

4 4 5 6 1 2 3

5 5 6 1 2 3 46 6 1 2 3 4 5

CYCLE-II

Session/week B1 B2 B3 B4 B5 B6

7 7 8 9 10 11 12

8 8 9 10 11 12 7

9 9 10 11 12 7 8

10 10 11 12 7 8 9

11 11 12 7 8 9 10

12 REVISION

DOC/LP/01/28.02.02

7/28/2019 ME2306 (1)

4/4

LESSON PLAN

LP: ME2306

Revision No: 00

Date: 15-06-2010

Page 4 of 4

Sub Code&Name: ME2306-Thermal Engineering Lab-I

Branch: Mechanical Engineering Semester: V

LIST OF EXPERIMENTS

I.C ENGINE LAB AND FUELS LAB 30

Valve Timing and Port Timing Diagrams.

Performance Test on 4-stroke Diesel Engine.

Heat Balance Test on 4-stroke Diesel Engine.

Morse Test on Multicylinder Petrol Engine.

Retardation Test to find Frictional Power of a Diesel Engine.

Determination of Viscosity Red Wood Viscometer.

Determination of Flash Point and Fire Point.

STEAM LAB 15

Study of Steam Generators and Turbines.

Performance and Energy Balance Test on a Steam Generator.

Performance and Energy Balance Test on Steam Turbine.

TOTAL: 45 PERIODS

Prepared by Approved by

Signature

Name J.Venkatesan Dr. N.Nallusamy

Designation AP / MECHANICAL HOD / MECHANICALDate 15-06-2010 15-06-2010