7/28/2019 ME2306 (1)
1/4
DOC/LP/01/28.02.02
Objective:
To acquire practical knowledge on working principles and performance evaluation ofinternal combustion engines and simple steam power plant. Also to gain knowledge ondetermination of viscosity and flash and fire points of given oil.
Sl.No List of Experiments
Time
CYCLE-I
1
Obtaining Valve timing diagram of a four stroke engine and
Port timing diagram of a two stroke engine 150 min
2Performance test on a single cylinder slow speed dieselengine fitted with mechanical dynamometer
150 min
3Heat balance test on a Twin cylinder high speed diesel enginefitted with hydraulic dynamometer
150 min
4Morse test on a multi-cylinder petrol engine fitted with eddycurrent dynamometer
150 min
5Retardation test on a single cylinder high speed diesel enginefitted with mechanical dynamometer
150 min
6
(a) Determination of viscosity of a given lubrication oilusing Red-Wood viscometer
(b) Determination of flash and fire point of a given fuel oil
using Open-cup apparatus
150 min
CYCLE-II
7Performance test on a single cylinder high speed dieselengine fitted with electrical dynamometer
150 min
8 Study of steam generators and steam turbines 150 min
9Determination of dryness fraction of steam using steamcalorimeter
150 min
9 Performance test on a steam generator 150 min
10 Energy balance test on a steam generator 150 min
11Performance test on steam turbine
150 min
12 Revision 150 min
DOC/LP/01/28.02.02
LESSON PLAN
LP: ME2306
Revision No: 00
Date: 15-06-2010
Page 1 of 4
Sub Code&Name: ME2306-Thermal Engineering Lab-I
Branch: Mechanical Engineering Semester: V
7/28/2019 ME2306 (1)
2/4
LESSON PLAN
LP: ME2306
Revision No: 00
Date: 15-06-2010
Page 2 of 4
Sub Code&Name: ME2306-Thermal Engineering Lab-I
Branch: Mechanical Engineering Semester: V
A Batch
CYCLE- I
Session/week A1 A2 A3 A4 A5 A6
1 1 2 3 4 5 6
2 2 3 4 5 6 1
2 3 4 5 6 1 2
4 4 5 6 1 2 3
5 5 6 1 2 3 46 6 1 2 3 4 5
CYCLE-II
Session/week A1 A2 A3 A4 A5 A6
7 7 8 9 10 11 12
8 8 9 10 11 12 7
9 9 10 11 12 7 8
10 10 11 12 7 8 9
11 11 12 7 8 9 10
12 REVISION
DOC/LP/01/28.02.02
7/28/2019 ME2306 (1)
3/4
LESSON PLAN
LP: ME2306
Revision No: 00
Date: 15-06-2010
Page 3 of 4
Sub Code&Name: ME2306-Thermal Engineering Lab-I
Branch: Mechanical Engineering Semester: V
B BATCH
CYCLE- I
Session/week B1 B2 B3 B4 B5 B6
1 1 2 3 4 5 6
2 2 3 4 5 6 1
2 3 4 5 6 1 2
4 4 5 6 1 2 3
5 5 6 1 2 3 46 6 1 2 3 4 5
CYCLE-II
Session/week B1 B2 B3 B4 B5 B6
7 7 8 9 10 11 12
8 8 9 10 11 12 7
9 9 10 11 12 7 8
10 10 11 12 7 8 9
11 11 12 7 8 9 10
12 REVISION
DOC/LP/01/28.02.02
7/28/2019 ME2306 (1)
4/4
LESSON PLAN
LP: ME2306
Revision No: 00
Date: 15-06-2010
Page 4 of 4
Sub Code&Name: ME2306-Thermal Engineering Lab-I
Branch: Mechanical Engineering Semester: V
LIST OF EXPERIMENTS
I.C ENGINE LAB AND FUELS LAB 30
Valve Timing and Port Timing Diagrams.
Performance Test on 4-stroke Diesel Engine.
Heat Balance Test on 4-stroke Diesel Engine.
Morse Test on Multicylinder Petrol Engine.
Retardation Test to find Frictional Power of a Diesel Engine.
Determination of Viscosity Red Wood Viscometer.
Determination of Flash Point and Fire Point.
STEAM LAB 15
Study of Steam Generators and Turbines.
Performance and Energy Balance Test on a Steam Generator.
Performance and Energy Balance Test on Steam Turbine.
TOTAL: 45 PERIODS
Prepared by Approved by
Signature
Name J.Venkatesan Dr. N.Nallusamy
Designation AP / MECHANICAL HOD / MECHANICALDate 15-06-2010 15-06-2010