Powerful Magnet for Hands-Free use

Rechargeable LED Floodlight with Spotlight• Bright, white LEDs illuminate large areas. • Single-element LED spotlight (100 lumens) direct-focused light where needed. • Magnetic base powerful enough to position the flashlight vertically or horizontally. • Durable construction of military-grade aerospace aluminum. • Rugged enough to be used in the toughest environments yet lightweight and easy-to-use. • Anti-roll hexagon shaped base• Recharge with 120 volt AC adapter or a 12 volt DC adapter (both included). • Approximate 4 hour use on full charge

7-7/8”

1-1/8”

96Lumens

Part No. Description Flood SpotLight Normally SPECIALKTI73393 30 LED Rechargeable Worklight 3.6 Volt 180 Lumens 100 Lumens $51.53 $48.95KTI73394 60 LED Rechargeable Worklight 7.2 Volt 360 Lumens 100 Lumens $61.00 $57.95

Hands Free 14 LED Headlamp • 14 LED (75 lumens) headlamp • Hi / Low / Off switch • Adjustable headband • Ratchets up/down for focus direction • Approximate 7 hour run time • 3-AAA batteries (included)

KTI73398$6.95 Normally $7.32

Rechargeable 3W COB LED with pivot head• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • 5 hour charging time • 2 hour run-time • ABS and rubberized housing • Super strong magnetic base• Rotating hook at the top that can be turned down. • Light head pivots 80 degrees from the base and rotates 180 degrees.

• AC & DC chargers included.

KTI73387$47.95 Normally $50.47

Rechargeable 3W COB LED• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • Charge time: 5 hours • Run-time: 2 hours • ABS and rubberized housing • Magnet on the back side and a clip for hanging • AC & DC chargers included

KTI73388$39.95 Normally $42.05

12 SMD LED Rechargeable Worklight • Rechargeable 12 SMD LED worklight. • ABS and rubberized housing• Magnet on the back side• Rotating hook on the top. • Hi / Low / Off switch.

KTI73399$52.95 Normally $55.74

Aluminum 16 LED Flashlight• 16 LED (96 lumens) flashlight• Aerospace grade aluminum body• Rubber grip handle• Belt holster included• 3 AAA batteries included

KTI73396$13.95 Normally $14.68

Marketplace

Pricing Good Through March 31, 2015

700 lb Pedestal Transmission Jack• Hand pumped, long stroke, single stage bottle jack, with a release lever to discharge the load• Load-limiting and bypass valves prevent against over loading and over extension• Adaptable saddle, with four angle brackets that can adjust to fit transmission pan flanges• Adjustable safety chain included to aid in load restraint• 1 Year Warranty on material and workmanship

KTI63500$289.95 Normally $305.21

1200 Lb Low Profile Transmission Jack• 1200 pound capacity transmission jack with a lift range from 5.75" to 31.5"• For automotive use up to pickup truck transmissions• Wide front-open chassis for lower profile when loaded• Full swivel pump handle can be accessed in any work position• Fully adjustable universal saddle with load securing hardware• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63515$449.95Normally $473.63

NEW

Exclusive Folding Option

Micro USB receiver chargesusing USB or 120V AC power

Load-limiting and bypassvalves prevent over loading

Slimline 6 LEDRechargeable Inspection Lamp• Super slim head at 1/4” thick by 11/16” wide• Thin head allows for inspection in tight quarters• Generates 200 lumens at 15 feet• 3.7 volt Li-ion/2200mah rechargeable battery• Charge time: 3 hours• Up to 7 hours of light on a single charge

KTI73389$49.95Normally $52.58

30 SMD LED Rechargeable Folding Underhood Worklight• 30 LED SMD worklight with 7.4 volt / 2000 mAh Li battery. • 6 Hour charge time • 3.5 hour approximate run time• Aluminum and ABS housing• Telescopic ends slide to a maximum of 74.75” • Two soft rubber covered brackets allow attaching the light to work area. • Hi / Low / Off operation modes • AC & DC chargers included. • Full extension length: 50.375" • Folded length: 26.875"

KTI73386$74.95 Normally $78.89

NEW

NEW

NEW

25 Foot Incandescent Trouble lights• Switch and auxillary outlet in handle.

• Metal cage guard. • Use with up to a 75 Watt bulb (not included).

50’ Incandescent Trouble Light Reel• Heavy duty metal shades have 360 rotating hanging hooks provide flexibility for all applications

• Work lights feature circuit breaker protection and grounded outlet in handle

• Length: 50'. Cord: 14/3 SJT. • Dual industrial cage.

KTI73335$169.95Normally $178.89

35’ Incandescent Trouble Light Reel• Metal Housing • 35' 16/3 SJT• Metal Cage with Hook • Outlet in Handle

KTI73330$96.95Normally $102.05

50’ Incandescent Trouble Light• Incandescent trouble lights are ideal for workshops or garages

• Heavy duty metal cage features 360 rotating hanging hook for maximum flexibility

• Switch and outlet in handle• Length: 50'. Cord: 18/3 SJT. • Watt: 1250. Amp: 10

KTI73359$39.95Normally $42.05

KTI7335825 Foot, 18/3 cord.

$23.95Normally $25.21

KTI7336025 Foot, 16/3 cord.

$29.95Normally $31.53

30 LED SMD Retrofit Light• Trouble Light 30 LED SMD Retrofit. • Twist on module converts an incandescent trouble light into a LED

• 30 high powered SMD LED (300 lumens). • A rubber bumper protects the unit. • Folding hanging hook fits into the head.

KTI73379$24.95 Normally $26.26

24 SMD LED Worklight• 24 SMD LED (800 lumen) • Heavy duty face plate • Foam insulated handle• On / Off switch• Multi-position ratcheting head

Cordless RechargeableCharge time: 2 hoursRun Time: 2 hours full strength

KTI73373$79.95 Normally $84.16

Corded• A/C Power with 3 foot 18/3 SJTW cord

KTI73374$59.95 Normally $63.11

NEW

50 Ton Air Hydraulic Truck Jack• 50 ton capacity truck jack, lift range from 11.4" to 21.25"• Narrow width fits between tandem wheels• Load-limiting and bypass valves prevent use beyond rated capacity and over-extension of ram

• Spring activated self-retracting ram• Release knob at top of T handle works at any handle position

• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63198$799.95Normally $842.05

Engine Support Bars• Transverse bar that extends from 34.5" to 61"• Support front wheel drive engines for repairs or servicing of engine mounts

• Includes a support leg for handling larger engines or engines requiring three support points

• Engine attachment and adjustment hardware included• 2 Year Warranty on material and workmanship

KTI62116 - 1,000 lb Support Bar$97.95 Normally $103.11

KTI62114 - 700 lb Support Bar$89.95 Normally $94.68

22 Ton Air Hydraulic Truck Jack• 22 ton capacity truck jack with a lift range from 9.06" to 17.94"• Narrow width fits between tandem wheels• Load-limiting and bypass valves prevent use beyond rated capacity and overextension of ram

• Spring activated self retracting ram• Release knob at the top of the T handle works at any handle position

• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63194$499.95Normally $526.26

SSKTIDLR3CAN

MM Canada Q1 2015_Layout 1 1/7/15 8:45 AM Page 1

2

73312

73311

LIGHTING

Fluorescent Angle Lights• Circuit breaker protection. • On/Off switch and grounded outlet in handle • Two adjustable hanging hooks that swivel 360°• Magnetic clip for convenient under hood use. • 16/3 grounded power cords

Replacement 13 WattFluorescent Bulb• Replacement bulb for all KTI 13 wattwork lights (angle and compact tube)

KTI73307$3.95 Normally $4.16

50' Extra Heavy Duty Outdoor Extension Cord• Extra heavy duty extension cord features12/3 SJTW single tap orange/black cord

• LED mounted in the end of cord lights upwhen cord is plugged into 110V power

• Length: 50'. Watt: 1875. Amp: 15

KTI73348$23.95Normally $25.21

All Weather Blue Lighted End Extension Cords • All Weather Extension Cords• 16/3 SJEOW, 13 Amp• Single Tap, LED Lighted End• Flexible to -58°F

Lighted End

Lighted End

Jack Stands• Designed to be used in pairs• Steel base with four feet pads for stability• Ratchet action design with ductile iron support column• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

NEW 1.5 Ton Scissor Jack• Lifting range from 4.1" to 15.2"• Large base for added stability• Long crank handle for ease of turning under load• All steel construction in a compact design for storage• 1 Year Warranty on material and workmanship

KTI63100$26.95Normally $28.37

1250 Lb Capacity Car Dollies• Pair of 1250 pound capacity car dollies used to move a disabled vehicle• Made of steel structural tubing for durability• Four bearing mounted swivel caster wheels for easy maneuverability• Two locking caster wheels on each dolly to prevent vehicle from moving• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63820$139.95 Normally $147.32

NEW

NEW

NEW

• 45.25" long pump handle for easy pumping under load• Dual pump piston power unit• Load-limiting and bypass valves to prevent use beyond rated capacity and over-extension of ram

• Complies With ASME PALD/2009 Safety Standards

• 2 Year warranty on material and workmanship

NEW

NEW

NEW

4 Ton Portable Ram Kit - ASP• 7,250 PSI hand pump and 10.5" long ram with 4.75" stroke• Basic attachments, .5 ton spreader ram, and five extension tubes included

KTI63703$199.95 Normally $210.47

Portable Ram Kits• Portable ram kit for spreading, bending, pushing, and clamping

• Force gauge to measure force applied to work• Snap-fit design for quick attachment and tube connections• 2 Year Warranty on material and workmanship

10 Ton Portable Ram Kit• 8,050 PSI hand pump and 12.6" long ram with 5.12" stroke• Basic attachments, .5 ton spreader ram, and four extension tubes included

KTI63709$299.95 Normally $315.74

3-1/3 Ton Low Profile Service Jack• 3.33 ton capacity low profile service jack for easy access under low ground clearance vehicles• Lift range from 3.5" to 21.375"• 50" long pump handle for easy pumping under load• Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load

• Load-limiting and bypass valves to prevent use beyond rated capacity and over-extension of ram

• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI63133$249.95 Normally $263.11

2 Ton Extra Long Low Profile Service Jack• 2 ton capacity extra long low profile service jack for easy accessunder low ground clearance vehicles

• Lift range from 2.75" to 24"• Raises saddle to maximum height in 8 full pump strokes - no load• Saddle diameter 3.85"

KTI63105$269.95 Normally $284.16

3/4 Ton Utility Underhoist Stand• Support under car components• Height range from 53" to 79"• Acme threaded screw for self-locking positioning• Bearing mounted spin handle for easy raising and lowering of screw

• 12" diameter base with 1.63" x 5.5" saddle• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI61076$90.95 Normally $95.74

• 3/4 Ton Utility Underhoist Stand with Pedal• Foot pedal to raise screw another 1.25" under400 pounds of load

KTI61077$99.95 Normally $105.21

1000 Lb Geared Engine Stand• 1000 pound capacity foldable engine stand for storage• Worm gear driven mounting plate with adjustable fingers rotates for desired engine position

• Four wheel design with locking caster wheels• Made of structural steel plate and tubing for added strength• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI62110$312.95 Normally $329.42

1500 Lb. Engine Sling• 1500 pound capacity engine sling for use with an engine crane• Level a load or adjust at angle for engine installation and removal• Hand crank and bearing mounted drive screw for easy adjustment• 4 mounting chains and brackets for quick attachment to engine• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI62115$49.95 Normally $52.58

2 Ton Low Profile Service Jack• 2 ton capacity low profile service jack for easy access under lowground clearance vehicles

• Lift range from 3.5" to 18.1"• Raises saddle to maximum height in 6.5 full pump strokes - no load• Saddle diameter 4.3" • Weighs: 67.2 lbs.

KTI63101$179.95 Normally $189.42

LIFTING

Transmission Jack Adapter for Service Jacks• Capacity: 700 lbs• Saddle Forward and Backward Tilt: 35°• Easily transforms your service jack into a transmission jack• 2 Year Warranty on material and workmanship

KTI63134$104.95Normally $110.47

Fuel Tank Adapter• Quick and easy installation to all underhoist transmission jack saddles

• Length, width, and height adjustments to handle any fueltank configuration up to 40 gallon capacity

• Four 3" by 5.5" foam support pads self adjust and protectthe tank from damage

• Ground wire assembly can be used with older metal tanksto prevent against static electric discharge

• 2 Year Warranty on material and workmanship

KTI63136$149.95 Normally $157.84

NEWNEW

Outdoor Extension Cords• Standard outdoor extension cord• 16/3 SJTW single tap cord• Rated: 13 amps, 125 volt, 1625 watts• Flexible to -40°F, water and weather resistant• UL listed

Part No. Description Normally SPECIALKTI73342 25 Foot Extension Cord $13.63 $12.95KTI73343 50 Foot Extension Cord $26.26 $24.95

Heavy Duty Outdoor Extension Cords• 14/3 SJTW single tap• Watt: 1875 • Amp: 15• LED mounted in end of cord lights upwhen cord is plugged into 110V power

Part No. Description Normally SPECIALKTI73345 25 Foot Extension Cord $31.53 $29.95KTI73346 50 Foot Extension Cord $55.74 $52.95

Lighted End

NEW

NEW

NEWNEW

48 LED Worklight • Super bright 48 element LED worklight • 25 foot 16/3 SJT power cord • 15 AMP outlet in handle • Clamped magnet attaches to center. • Two swivel hooks that fold down.

KTI73397$41.25 Normally $43.42

KTI73311• 25 Foot 16/3 cord• 13 Watt• Single bulb• On/Off switch

$32.95Normally $34.68

KTI73315• 35 Foot 16/3 cord Reel• 13 Watt• Single bulb• On/Off switch

$84.95Normally $89.42

KTI73312• 25 Foot 16/3 cord• 26 Watt• (2) 13 watt bulbs• (2) independent On/Off switches

$64.95Normally $68.37

500 Watt Halogen Work Light with 5 Foot Stand• 5 Foot 18/3 SJTW Power Cord• Heavy duty 5 foot tripod metal stand with bulb guard• Uses a 500 watt quartz halogen bulb (included), • IIluminate the workshop, garage or job site with the power of bright halogen light.

KTI73372$62.95 Normally $66.26

Halogen Replacement Bulb• Replacement Halogen Bulb, 500 Watt, for Models73370, 73372 and 73375

KTI73371$2.95 Normally $3.11

50 Foot Retractable Extension Cord Reel with Tri-Tap Outdoor Plug• Features an oil and water resistant cord, retractable reel, power indicator, lighted end and circuit breaker protection

• Cord: 16/3 SJEOW trip-tap

KTI73341$149.95 Normally $157.84

30 Foot Retractable Cord Reel with 3-Outlet ConnectorExtension reel features oil and water resistantcord, retractable reel, metal housing and circuit breaker protection. 16/3 SJTW cord with indoor tri-tap. 10A/125V, 1250W.

KTI73340$84.95 Normally $89.42

Part No. Description Normally SPECIALKTI73380 25 Foot 16/3 Blue $24.16 $22.95KTI73381 50 Foot 16/3 Blue $42.05 $39.95

Part No. Description Normally SPECIALKTI61202 3 Ton Jack Stands - Pair Lifting Range: 11.6" to 16.75". Weight: 16 lbs. $36.79 $34.95KTI61205 6 Ton Jack Stands - Pair Lifting Range: 15.75" to 24". Weight: 32.5 lbs. $73.63 $69.95KTI61211 12 Ton Jack Stands - Pair Lifting Range: 19.63" to 30.25". Weight: 75 lbs. $157.84 $149.95

50 Foot 13 WattFluorescent Tube Light Reel• 18/2 SJT Cord, • Swivel Hook, Outlet in Handle• UL and cUL approved

KTI73318$94.95 Normally $99.95

MM Canada Q1 2015_Layout 1 1/7/15 8:46 AM Page 2

DRAIN PANSSuper Single Axle Drain PanCatches oil, axle nuts, bearings - most anything removed from thewheel end for service. Works with most dual and super single wheelsizes 22.5 and 24.5, steel or aluminum wheels, hub piloted or studpiloted, drive or trailer axles. Attaches with a hand tightened lug nut.Will not tip or spill - virtually eliminating clean-up. Durable, lightweight HDPE plastic. Made in USA.

KTI74640$3.95Normally $4.16

Drip TrayChemically resistant polyethylene. Size: 22" x 22" x 1-1/2" deep. Made in USA.

KTI74641$14.95Normally $15.74

Fluid Measures with Flex Spouts• Chemically resistant polyethylene• Color: Translucent• Quart/Liter markings• Removable flex spouts• flip top lids

FLUID MEASURES FILTER PLIERS

FILTER WRENCHES

GRINDERS

SHOP EQUIPMENT

Steel Bench Vises• Lockable swivel bases• 10 year warranty

• 6,500 lb. capacity• Maximum lifting height: 7” • Lowered fork height: 3”• 27” fork width • 48” fork length• 210° turning radius

Booster Cables• Booster cables have a tangle-free design• Flexible to -40 degree Fahrenheit temperatures• Vinyl coated clamps help prevent rust and corrosion• For side and top battery post

74500

74505 74510

74523

7452174524

74530

BATTERY SERVICE

74536 74537 74538

Booster Cable Replacement Clamps• Vinyl coated clamps help prevent rust and corrosion

Simulate actualcranking loads

FUNNELS

Double Capped Flex-Funnels

Funnels with a Screen• Chemically resistant polyethylene• Color: Safety RED• Made in USA

Double Capped Funnels• Eliminate spills and contaminants• Reduces debris• Chemically resistant polyethylene

KTI74607• 1 Pint capacity• Color: Orange• 3” Top ID• 1/2” Spout OD

$3.95Normally $4.16

KTI74608• 1.25 Quart capacity• Color: Dark Blue• 4” Top ID• 3/4” Spout OD

$5.95Normally $6.26

KTI74609• 1.3 Quart capacity• Color: Black• 4” Top ID• 1-3/8” Spout OD

$5.95Normally $6.26

KTI74611• 1.5 Quart capacity• Color: Yellow• 4” Top ID• 3/4” Spout OD

$5.95Normally $6.26

KTI74613• 1.66 Quart capacity• Color: Dark Red• 4” Top ID• 1-3/8” Spout OD

$5.95Normally $6.26

Splash Ring Flex Spout Funnel• 5.5” x 5.5” x 14.5” with removal flex spout• 1 Quart capacity • Color: Black• Complete with metal screen

KTI74605$3.95 Normally $4.16

KTI74606• 2 Quart capacity

$3.95Normally $4.16

KTI74610• 6 Quart capacity

$5.45Normally $5.74

3-Quart Drum Funnel with Hinged Lid• Tough industrial quality • Fits 2” threaded drums• Chemically resistant polyethylene

KTI74612$29.95 Normally $31.53

"The Guzzler" Pivot Funnel • Large capacity funnel has ball pivot at base of funnel• Directs flow without spilling • Made in the USA.

KTI74603$7.95 Normally $8.37

Drum Funnel• Threaded end screws on to 55 gallon drum• Durable, flexible • Made in the USA.

KTI74604$12.95 Normally $13.63

3 Piece Funnel Set• Includes: 3.5”, 5.5” and 7.5” diameter funnels• Chemically resistant polyethylene

KTI74630$3.00 Normally $3.16

Battery Testers• Extremely handy and portable wayto load test suspected low chargingbatteries

• 10-second test cycle. • Extra heavy nickel-plated ventilated case, heavy duty cable,copper-plated clamps, and loadsafety switch to prevent arcing.

3

6” Heavy Duty Bench Grinder• Fully enclosed, pre-lubricated ball bearings• Adjustable acrylic eye shields deflect sparks. Adjustable tool rests.• Includes fine (60-grit) and course (36-grit) wheels• Cast iron motor housing• 3450RPM (no load). 1/3 HP, 115V motor. UL listed.

KTI60060$84.95 Normally $89.42

Electric 4-1/2” Angle Grinder5 amp; 11,000 rpm no-load speed; 120 volt AC rating. A spindle lock makes changing the wheel quick and easy. Includes a wheel guard, wrench and flange. Ergonomic, removablereversible side handle. UL listed.

KTI10010$39.95Normally $42.05

KTI74650• 2 Liter capacity

$9.45 Normally $9.95

KTI74651• 5 Liter capacity

$16.95 Normally $17.84

Cap Oil Filter Wrench • 64/65MM 14 Flute for most Toyota applications• Cap style design allows easy removal and installationfrom the end of the filter, even in tight locations.

• Use with 3/8" square drive.

KTI73613N$4.95 Normally $5.21

Oil Filter Wrench Toyota/Lexus• Fits Toyota, Lexus, Scion, Honda and Nissan filters• Aluminum oil filter wrench• 64.5mm diameter with 14 flutes• Use with 3/8" square drive

KTI73630$13.95 Normally $14.68

Adjustable Oil Filter PliersFor removing spin-on filters with diameters from 2-1/4” to 6”. Self adjusting spring action. Made in USA.

KTI73620$20.95Normally $22.05

Truck Filter PliersCapable of removing all agricultural and construction equipment andautomotive canister type filters. Ideal for loosening over-tightened orseized filters. 17” extended reach increases leverage. Spring loadedpliers work on auto filters as well as Cummins diesel filters. Range: 4” to 7” diameter. Normally $36.79

KTI73621$34.95

Steel Frame Creepers• Fully padded for comfort• Six (6) 2-inch oil-resistant rubber casters• Steel frame epoxy-coated to prevent rusting• Four (4) cross rails for support• Rugged, durable construction

KTI creepers feature rugged, durable construction for a lifetime of use. The ergonomic design boasts fully padded cushions for added comfort.

KTI7495136 inch Steel Frame Creeper

$52.95 Normally $55.74

KTI7495640 inch Steel Frame Creeper

$64.95 Normally $68.37

Part no. description Normally SPECIALKTI64105 5 inch Wide Bench Vise $126.26 $119.95 Opens to 7 inches

KTI64106 6 inch Wide Bench Vise $150.47 $142.95 Opens to 8 inches

KTI64108 8 inch Wide Bench Vise $196.79 $186.95 Opens to 9 inches

Adjustable Mechanic's Seat• Round, adjustable mechanic's seat• Padded 12” seat for added comfort• Adjustable height by pneumatic cylinder from 14" to 19"

• Large steel base also serves as storage for tools

• (5) 2-1/2" oil-resistant rubber casters

KTI74971$79.95 Normally $84.16

Hand Pallet Jack• High-quality welded steel construction• Powder-coated finish for added durability• High-quality integrated cast cylinder• Weight: 187 lbs.

KTI63800$499.95 Normally $526.26

500 Amp Parrot Claw Booster Cable Replacement Clamps (Pair)• Replacement side terminal extension cable clamps for professional grade booster cables

KTI74535$11.95 Normally $12.58

Part No. Description Cord Length Cable Gauge Clamps Normally SPECIALKTI74500 Light Duty Booster Cables 12 Foot 10 Gauge 250 Amp Clamps $10.47 $9.95KTI74505 Medium Duty Booster Cables 12 Foot 8 Gauge 400 Amp Clamps $14.68 $13.95KTI74510 Medium Duty Booster Cables 16 Foot 6 Gauge 400 Amp Clamps $21.00 $19.95KTI74521 Heavy Duty Booster Cables 16 Foot 4 Gauge 400 Amp Clamps $29.42 $27.95KTI74523 Heavy Duty Booster Cables 20 Foot 4 Gauge 500 Amp Clamps $39.95 $37.95KTI74524 Heavy Duty Booster Cables 20 Foot 4 Gauge 400 Amp Clamps $31.53 $29.95KTI74530 Extra Heavy Duty Booster Cables 25 Foot 2 Gauge 500Amp Parrot Jaw Clamps $52.58 $49.95

Part No. Description Normally SPECIALKTI74536 400 Amp Cable Clamps $5.21 $4.95KTI74537 500 Amp Cable Clamps $12.58 $11.95KTI74538 800 Amp Cable Clamps $36.79 $34.95

Battery Terminal BrushAll metal battery cleaner promotes longer battery life

KTI70220$4.95 Normally $5.21

500 Amp Carbon Pile Load Tester• 500 AMP adjustable load carbon pile • Tests 12 volt batteries rated to 1000 CCA or 160 AMP hour• 500 AMP side terminal clamps, heavy-duty stranded copper cables• 15 second test with audible tone • Can also test alternators, regulators and starters.

KTI70210$109.95 Normally $115.74

Battery Tester• Hydrometer immediately and accurately tests battery life whether the battery is hot or cold

• Help extend battery life and detects overcharge• Works on all 6-12-24 volt systems

KTI70212$6.95 Normally $7.32

Antifreeze Tester• Hydrometer immediately and accurately tests strengthof solutions (ethylene glycol), with engine hot or cold

• Temperature adjustment scale for accurate interpretation of mixture strength

KTI70211$6.95 Normally $7.32

125 Amp Digital Battery Tester • 125 Amp Loading Capacity, • for 12 Volt batteries,

KTI70216$47.95 Normally $50.47

OBDII Memory Saver Cord• Retains a vehicle's electronic memory presets (radio, GPS,seats and accessories) while vehicle battery is disconnected

• OBDII cord connects to any 12V portable power source• Will not interfere with the vehicle's fault codes• Visual LED indicator illuminates when cord is properly connected to power source

• Extra-long 8-foot cord makes it easy to use on any vehicle

KTI74308$14.95 Normally $15.74

100 Amp Battery Tester• Test 6 and 12 volt DC batteries. • 100 AMP load capacity. • 0-16 volt analog display meter with zero adjust.

KTI70215$39.95 Normally $42.05

17 Piece Master Oil Filter Wrench Set• 3/8" drive cap oil filter wrenches. • Fits 95% of domestic and import automotive applications. • Complete set comes in a handy 10" x 13" plastic case. • Includes: 80mm 15 flutes, 82mm 15 flutes, 86mm 14 flutes,65/67mm 14 flutes, 68mm 14 flutes, 73/74mm 14 flutes, 64/65mm14 flutes, 74/76mm 15 flutes, 76mm 14 flutes, 93mm 15 flutes,76mm 30 flutes, 86mm 16 flutes, 88.4mm 15 flutes, 93mm 36flutes, 93mm 45 flutes, 96mm 18 flutes, 100mm 15 flutes.

KTI73635$44.95 Normally $47.32

MM Canada Q1 2015_Layout 1 1/7/15 8:47 AM Page 3

BIT SETS

RATCHETING WRENCHES

4

2280122870

21500

22601

3/8” Drive Hex Bit SetsHeat treated, chrome vanadium steel. Includes socket rail organizer.

47 Piece 3/8” Drive Standard & Metric Socket SetIncludes a 3/8” Drive Pro Ratchet, 3” & 6” extensions, standardlength sockets 1/4” to 7/8” and 6mm-19mm, deep sockets 3/8” to7/8” and 10-19mm. Complete with carry case. Lifetime Warranty.

1/4”Drive

3/8”Drive

SOCKET SETS

3/4”Drive

2209522092

23092

23095

Pro Series RatchetsHigh polish chrome finish, knurled handle and push button release. Thumb lever directional switch. Fine tooth ratchet mechanism.

22093

PRO-SERIES RATCHETS

Ratcheting Wrench Sets with Directional SwitchThe speed of a ratchet with the accessibility of a wrench.Ratcheting box end features easy flip switch reversingmechanism. Needs as little as 5° swing to move the fastener. Designed to reduce fastener rounding. Wrenchesfeature a sleek head design for tight access. All metalconstruction for durability and strength. Lifetime warranty.

Ratcheting Wrench SetsSpeed of a ratchet with the accessibility of a wrench. Needs as little as 5° swing to move the fastener. Designed to reduce fastener rounding. Sleek head design with 0° offset for tight access points and all metal construction for durability and strength.Reverse direction by simply flipping over wrench. All KTI wrenches carry a lifetime warranty.

Spline Shape

X-Long Double Box Flex Ratcheting Spline Wrench SetsExtra-long, flexible and reversible double box ratcheting wrenches forged of chrome-vanadium steel and heat treated for durability. 72-tooth ratchet mechanism,high polish finish and are nearly 40% longer than standard wrenches. 5° swing tomove the fastener. Designed to reduce fastener rounding. Sleek head design for tightaccess points. All metal construction. Lifetime warranty.

Professional Series Combination Wrench SetsHigh polish smooth surface. Longer than standard combination wrenches. Heat treated.Available in fractional and metric sizes. New larger sets do not have kit bag organizers

Raised Panel Combination Wrench SetsRaised panel design. High polished chrome plated protects and prevents corrosion.Heat treated. All sets include kit bag organizers. 12 point box end. Available in fractional and metric sizes.

Jumbo Fractional Combination Wrench SetsRaised panel design. High polished chrome plated vanadium steel protects and prevents corrosion. Heat treated.

COMBINATION WRENCHES

SOCKET ONLY SETSSocket Only SetsAvailable in fractional and metric sizes short and deep lengths. 6 and 12 point sockets.

Hand Held Butane Torch Lighter• Handy pocket butane torch• Light duty soldering such as: shrinking heat sealtubing, craft projects, thawing frozen locks, lightingcamp stoves

KTI70052$8.95 Normally $9.42

Self Igniting Propane Torch Head• Portable and lightweight • High energy flame• Angled swivel tube to reach difficult areas• For use with MAPP or propane gas.

KTI70056$30.95 Normally $32.58

Self Igniting Propane Torch Head• Piezo igniter for instant flame• Safety lock feature to prevent accidental ignition• Ignition button lock for continuous use• Replacement brass tip• For use with MAPP or propane gas.

KTI70057$44.95 Normally $47.32 FIRE SAFETY

TORCHES

Mini Butane Torch• Mini butane torch with solder head• Piezo-electric ignition with locking safety mechanism• Temperature and flame control, up to 2372 degreesFahrenheit jet flame

• Anti-flare • Removeable safety stand

KTI70054$29.95 Normally $31.53

NEW

NEW

NEW

NEW

7 Piece Professional Series Nut Driver Sets• Alloy steel sockets and shafts (3 inch hollow shafts).• Ergonomic soft grip handles for comfort• Packaged in handy plastic hanging organizer

KTI14400 Fractional SetSizes: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16" and 1/2"

$29.95 Normally $31.53

KTI14500 Metric SetSizes: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 11mm

$29.95 Normally $31.53

Part No. Description Pieces Drive Normally SPECIALKTI21500 Tamperproof Torx® Set. MADE IN USA. 10 Piece 1/4”, 3/8” Drive $31.53 $29.95 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T50, T55

KTI22601 Torx® Bit Set. MADE IN USA. 12 Piece 1/4”, 3/8”, 1/2” Drive $29.42 $27.95 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55 1/2” Drive: T60

KTI22870 External Torq Socket Set. 10 Piece 1/4”, 3/8” Drive $18.89 $17.95 1/4” Drive: E4, E5, E6, E7, E8. 3/8” Drive: E10, E12, E14, E16, E18

KTI22801 Torq Socket Set. 12 Piece 1/4”, 3/8” Drive $17.84 $16.95 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55, T60

Handheld Impact Driver3/8” square handheld driver includes detachable bit holder and four5/16” hex bits. Ideal for loosening rusted screws, nuts and bolts.

KTI71700$18.95Normally $19.95

Part No. Description Normally SPECIALKTI22970 7 Piece Fractional Hex $17.84 $16.95 Includes bit sizes: 1/8” to 3/8”

KTI27970 7 Piece Metric Hex $19.95 $18.95 Includes bit sizes: 3mm to 10mm

44 Piece 1/4” Drive Standard & Metric Socket SetIncludes a 1/4” Drive Pro Ratchet, 2” Extension, 6” Extension, standard length fractional sockets 3/16” to 9/16”, deep fractionalsockets 1/4” to 9/16”, standard length metric sockets 4mm to15mm, deep metric sockets 6mm to 15mm and custom molded carrying case. All sockets are 6 point. Lifetime Warranty.

KTI21044$49.95 Normally $52.58

KTI22547

with 12 Point Sockets

$79.95Normally $84.16

KTI22047

with 6 Point Sockets

$78.95Normally $83.11

3/4” Drive Pro RatchetThumb action direction switch. Lightweight alloy handle. 19-5/8” Overall length. Normally $52.58

KTI24092$49.95

20 Piece 3/4” Drive Fractional Socket SetIncludes 16 sockets from 3/4” to 2”, a ratchet, T-Handle driver,4” and 8” long extensions, and storage case. 6 Point sockets.

KTI24121$159.95 Normally $168.37

Ratcheting Adapter 3/4" Drive• 3/4" female x 3/4" male

KTI24085$44.95 Normally $47.32

Part No. Description Over-all Length Normally SPECIALKTI22092 3/8” Drive Pro Ratchet 7-3/4” Long $28.37 $26.95KTI22093 3/8” Dr. Swivel Head Ratchet, 180° Flex Head, Locks in 5 positions. 10-1/2” Long $36.79 $34.95KTI22095 3/8” Drive Pro Ratchet - Long Handle 11-3/4” Long $31.53 $29.95KTI23092 1/2” Drive Pro Ratchet 9-7/8” Long $31.53 $29.95KTI23095 1/2” Drive Pro Ratchet - Long Handle 15” Long $42.05 $39.95

Part No. Description Sizes Normally SPECIALKTI43100 4 Piece Fractional Ratcheting Double Box Flex Spline 8 sizes from 5/16” to 3/4” $168.37 $159.95KTI43500 5 Piece Metric Ratcheting Double Box Flex Spline 10 sizes from 8mm to 19mm $210.47 $199.95

Part No. Description Sizes Normally SPECIALKTI45600 16 Piece Metric Ratcheting Wrench Set 8mm to 24mm $231.53 $219.95KTI45900 13 Piece Fractional Ratcheting Wrench Set 1/4” to 1” $189.42 $179.95

Part No. Description Sizes Normally SPECIALKTI45400 7 Piece Fractional Ratcheting Wrench Set 5/16” to 3/4” $67.32 $63.95KTI45500 7 Piece Metric Ratcheting Wrench Set 8mm to 18mm $67.32 $63.95

Part No. Description Sizes Normally SPECIALKTI41300 9 Pc. Fractional Pro Series Set with Kit Bag 3/8” to 7/8” $49.42 $46.95KTI41304 14 Pc. Fractional Pro Series Set with Kit Bag 3/8” to 1-1/4” $147.32 $139.95KTI41305 24 Pc. Fractional Set with Kit Bag 1/4” to 1-5/8” $368.37 $349.95KTI41800 13 Pc. METRIC Pro Series Set with Kit Bag 7 to 19mm $57.84 $54.95KTI41801 9 Pc. METRIC Pro Series Set, No Kit Bag 20 to 28mm $89.42 $84.95

6 Piece Jumbo SetSizes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2”

KTI41006$119.95 Normally $126.26

Part No. Description Sizes Normally SPECIALKTI41011 11 Piece Fractional Raised Panel Wrench Set 3/8” to 1” $42.05 $39.95KTI41013 13 Piece Fractional Raised Panel Wrench Set 1/4” to 1” $52.58 $49.95KTI41014 14 Piece Fractional Raised Panel Wrench Set 3/8” to 1-1/4” $73.63 $69.95KTI41016 16 Piece Fractional Raised Panel Wrench Set 1/4” to 1-1/4” $78.89 $74.95KTI41513 13 Piece METRIC Raised Panel Wrench Set 7mm to 19mm $36.79 $34.95

Part No. Description Pieces Points Sizes Normally SPECIALKTI26100 1/4” Drive Metric Socket Set 8 Piece 6 Point 6mm to 13mm $14.68 $13.95KTI26200 1/4” Drive Metric DEEP Socket Set 8 Piece 6 Point 6mm to 13mm $21.00 $19.95KTI27401 3/8” Drive Metric DEEP Socket Set 15 Piece 12 Point 7mm to 21mm $29.42 $27.95KTI27501 3/8” Drive Metric Socket Set 15 Piece 12 Point 7mm to 21mm $19.95 $18.95KTI22100 3/8” Drive Fractional Socket Set, 10 Piece 6 Point 5/16” to 7/8” $15.74 $14.95KTI22201 3/8” Drive Fractional DEEP Socket Set, 9 Piece 6 Point 3/8” to 7/8” $17.84 $16.95KTI27101 3/8” Drive Metric Socket Set, 13 Piece 6 Point 7mm to 19mm $15.74 $14.95KTI27201 3/8” Drive Metric DEEP Socket Set, 9 Piece 6 Point 10mm to 18mm $19.95 $18.95KTI23110 1/2” Drive Fractional Shallow Socket Set, 13 Piece 6 Point 7/16" to 1-1/4" $26.26 $24.95KTI23200 1/2” Drive Fractional DEEP Socket Set, 8 Piece 6 Point 1/2" to 15/16" $24.16 $22.95KTI28100 1/2” Drive Metric Shallow Socket Set, 14 Piece 6 Point 15mm to 28mm $34.68 $32.95KTI28200 1/2” Drive Metric DEEP Socket Set, 10 Piece 6 Point 15mm to 24mm $37.84 $35.95KTI24105 3/4” Drive Fractional Add-On Socket Set, 5 Piece 6 Point 2-1/16” to 2-3/8” $131.53 $124.95

Pyro Torch ShieldSize: 10” X 18”. Protect surfaces from sparks or open flame fromgas torches. Will withstand even the extreme heat of acetylenetorches. Normally $15.74

KTI70440$14.95

Pyro Welding BlanketPatented high-tech carbon fiber welding blanket that is lightweight,soft and flexible. Protects against direct contact with weld spatter.Withstands temperatures to 3000°F. Size: 50”x 80”.

KTI70450$149.95 Normally $157.84

MM Canada Q1 2015_Layout 1 1/7/15 8:48 AM Page 4

5

Professional Series ScrewdriversNon-slip triangular comfort grips. Chrome vanadium blades. Popularslotted and Phillips tips with a variety of different length blades.

00081

00082

00080

00071

0007200077

00097

00074

00089

00086

KTI Service KitsThese are assortments of consumable items that must be purchased by complete kits.The items inside these service kits are NOT available individually. Kits are NOT refillable.

ABD6

300

00035 07740

INSTALLER KITS

SERVICE KITS

Heat Shrink Tube AssortmentsAllows protection and insulation of automotive wires, electrical and mechanical components from heat, moisture, and corrosion. Quick and simple to shrink by heat gun.

KTI00047

ABD6

100

Installer Assortments• Refillable assortments. • Each item has been assigned a part number. • These kits offer the flexibility to purchaseonly the most popular items.

ABD6500

KTI00040

00033 00034

KTI00006

HAND TOOLS

Brass Hammers - Hickory Handles• Hickory handle with solid brass head• Prevents damage to delicate parts• Non sparking • Made in the U.S.A.

Solid Brass Hammers• Non sparking prevents nicking delicate metals• Handle is solid brass • Made in the U.S.A.

15 Piece Assorted Punch and Chisel Set5 pin punches, 5 starter punches, 3 cold chisels and 2 centerpunches in plastic tray.

Screwdriver Sets• Made of Chrome Vanadium steel

Part No. Description Normally SPECIALKTI11008 8 Piece Screwdriver Set $17.84 $16.95 Sizes: 4 Slotted (5/16" x 6", 3/16" x 4",1/8" x 3", 1/4" x 1-1/2"), 4 Phillips (#2x6", #1x4", #0x3", #2x1-1/2")

KTI11018 18 Piece Screwdriver Set $23.11 $21.95 Sizes: 4 Slotted, 4 Phillips, 10 Precision, 2 Slotted and 2 Phillips

KTI11035 34 Piece Screwdriver Set $42.05 $39.95 Sizes: 7 Phillips, 8 Slotted, 4 Torx, 2 Square, Bits Driver, 12 Bits and 4 Phillips

NEW11018

11035

Part No. Description Normally SPECIALKTI16002 5 Piece Pro Phillips Set $23.11 $21.95 Sizes: Stubby, 3”, 4”, 6”, and 8” Long

KTI16001 5 Piece Pro Slotted Set $21.00 $19.95 Sizes: Stubby, 3”, 4”, 6”, and 8” Long

KTI16000 10 Piece Pro Series Set $45.21 $42.95 Includes all screwdrivers from both KTI16001 & KTI16002 (Phillips & Slotted Assortments)

8 Piece Screwdriver SetsAssortment of 3 Phillips and 5 slotted blades. 5 Screwdrivers feature hex bolsters for wrench assist.

KTI19000 Black Handles KTI19700 Orange HandlesKTI19800 Red HandlesKTI19900 Green HandlesYour Choice $16.95 Normally $17.84

Part No. Description Normally SPECIALKTI00071 150 Piece Hitch Pin Assortment Six different sizes 1-3/16” to 2-15/16” Long $6.79 $6.45KTI00072 300 “E” Clip Assortment 9 sizes from 1/16” to 7/8” $6.79 $6.45KTI00075 555 Cotter Pin Assortment Small Pins from 1/16” x 1” to 5/32” x 2-1/2” $8.37 $7.95KTI00077 300 Snap Ring Assortment Wide assortment of 18 different sizes. $7.32 $6.95KTI00078 144 Cotter Pin Assortment Large Pins from 1/8” x 2” to 5/16” x 2-1/2” $10.47 $9.95KTI00080 120 Pc. Auto Fuse Assortment Color coded fuses from 5Amp to 30Amp $10.47 $9.95KTI00081 120 Pc. Mini Auto Fuse Assortment Color coded fuses from 2Amp to 30Amp $12.58 $11.95KTI00082 56 Pc. Maxi Auto Fuse Assortment Color coded fuses from 20Amp to 100Amp $49.42 $46.95KTI00084 170 Pc. U-Clip & Screw Assortment $7.32 $6.95KTI00085 200 Pc. Hex Head Washer Drill Assortment $9.42 $8.95KTI00086 270 Pc. HNBR O-Ring Assortment 17 sizes High Temperature Green (for A/C) $21.00 $19.95KTI00089 110 Pc. Copper Washer Assortment 6 sizes from 1/4” to 5/8” $11.53 $10.95KTI00091 125 Pc. Grommet Assortment 18 different sizes $7.32 $6.95KTI00093 120 Pc. Roll Pin Assortment 30 different sizes $7.32 $6.95KTI00094 407 Pc. Universal O-Ring Assortment Sizes: 1/8” to 2” ID and 1/4” to 2-1/4” OD $11.53 $10.95KTI00095 419 Pc. Universal O-Ring Assortment Sizes: 3mm to 50mm ID $11.53 $10.95KTI00096 110 Pc. Metric Grease Fitting Asst. 6mm and 10mm fittings, straight, 45° and 90° $14.68 $13.95KTI00074 110 Pc. Fractional Grease Fitting Asst. 1/4-28 &1/8-27 fittings, straight, 45° and 90° $14.16 $13.45KTI00097 157 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA $9.42 $8.95KTI00087 360 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA $23.11 $21.954 Piece

Roll-End Pry Bar SetOne each: 6”, 12”, 16” and 20” pry bars.

KTI71600$34.95 Normally $36.79

4 Piece Bent End Pry Bar SetIncludes a 9”, 12”, 18” & 24” pry bars. Smooth comfortable square handles.

KTI19240$33.95 Normally $35.74

4 Piece Assorted Scraper SetIdeal for removing gaskets and carbon. Includes: 1” wide stubby scraper; 1” wide carbon scraper; 1/2” widecombination offset scraper; and 5/8” scraper. Made in USA.

KTI70023$34.95 Normally $36.79

Long Gasket Scraper6-1/4” long straight shank. 1” wide blade with square screwdriver handle.

KTI70020$7.95 Normally $8.37

14” Wire and Rope CutterCut wire, rope, piano wire, steel wire, ACSR cable and aircraft cable. The shear-cut blades hold & lock cable in cutting position for a clean,sharp cut. Chrome-vanadium steel cutting head. 14” overall length.

KTI57514$34.95 Normally $36.79

400 Piece Cable Tie AssortmentConvenient dispenser type package allows access to each compartment separately. Made in USA. Color: UV Black.Includes: (200) 4 inch, (100) 7 inch and (100) 11 inch long cable ties.

KTI78004$21.95 Normally $23.11

Heavy Duty Cable Cutters• For cutting copper and aluminum cable• Not for use on ACSR cable or steel wire. Normally $16.79

KTI52009$15.95

24" Pry Bar with Square Handle

KTI19224$22.95 Normally $24.16

Part No. Description Normally SPECIALABD6000 90 Piece GM Body Retainer Kit Specifically for GM $31.53 $29.95ABD6100 82 Piece FORD Body Retainer Kit Specifically for FORD $36.79 $34.95ABD6200 80 Piece Chrysler Body Retainer Kit Specifically for Chrysler $36.79 $34.95ABD6300 65 Piece Push Type Body Retainer Kit For use on All vehicles $36.79 $34.95ABD6500 120 Piece Sems Screw Body Retainer Kit For use on All vehicles $41.00 $38.95ABD7500 120 Piece Push Type Body Retainer Kit For use on All vehicles $66.26 $62.95KTI00005 64 Piece Brake Line Fitting Kit For use on All vehicles $62.05 $58.95KTI00006 30 Piece Brake Bleeder Screw & Washer Assortment For use on All vehicles $23.11 $21.95KTI00040 75 Piece Vacuum Tee Cap Kit 1/8", 3/16", 1/4", 5/16" and 3/8" caps $28.37 $26.95KTI00047 95 Piece Brake Line Fittings Assortment For British, European and Japanese systems $104.16 $98.95

Part No. Description Shrink Ratio Length Diameters Normally SPECIALKTI00033 216 Piece Set - Black/Red 2:1 45 & 75mm 2.5, 3.5, 4.5, 6, 10mm $15.74 $14.95KTI00034 105 Pc Double Wall Set - Blk/Red 3:1 45 & 75mm 3.2, 4.8, 6.4, 9.5, 12.7mm $39.95 $37.95KTI00035 85 Piece Set - Black only 2:1 6 inch 1/8”, 3/16”, 1/4”, 3/8”, 1/2” $41.00 $38.95KTI07740 235 Piece Set - Assorted colors 2:1 6 inch 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 5/8, 3/4” $16.79 $15.95

Auto Loading Folding Utility Knife• Folded length is 4.3125 inches• Open length 6 inches.

KTI73102$7.95 Normally $8.37

Part No. Individually Normally SPECIALKTI72982 3/8” Brass Punch $15.74 $14.95KTI72984 1/2” Brass Punch $21.00 $19.95KTI72986 5/8” Brass Punch $25.21 $23.95KTI72988 3/4” Brass Punch $31.53 $29.95

Part No. Hammer Diameter Normally SPECIALKTI71714 Brass 16 oz. 1-1/4” $34.68 $32.95KTI71715 Brass 24 oz. 1-1/4” $42.05 $39.95KTI71733 Brass 32 oz. 1-1/2” $52.58 $49.95

Part No. Hammer Diameter Normally SPECIALKTI71782 Brass 27 oz. 1-1/16” $57.84 $54.95KTI71783 Brass 48 oz. 1-1/4” $84.16 $79.95

Nylon Tie Tightening Tool• Grips nylon cable ties and tightens with very secure grip• Also cuts excess with thumb lever

KTI76000$15.95 Normally $16.79

Professional Safety Utility Knife• Folded length is 4.375 inches • Open length 7 inches.

KTI73103$10.95 Normally $11.53

Extra Heavy Duty Hacksaw• All metal heavy duty frame• High leverage tensioner blade can be set at 45 degrees or vertical• Handle with blade storage compartment

KTI72802$14.95 Normally $15.74

5 Piece Upholstery Clip Remover Set“U” and “V” clip styles of tools as well as an upholstery tucking tool. Includes: V-blade and U-blade Door Panel Tool, V-blade and U-bladeMini Trim Panel Tool and Reverse U-blade Door Panel Tool.

KTI70031$48.95 Normally $51.53

12" Tubular Hacksaw • Adjustable tensioner • Includes one saw blade

KTI72801$9.95 Normally $10.47 5 Piece Chisel Set

3/8”, 1/2”, 5/8”, 3/4” and 7/8” cold chisels.

KTI73000$22.95 Normally $24.16

6 Piece Pin Punch SetIncludes sizes: 3/32”, 1/8”, 5/32”, 3/16”, 1/4” and 5/16”.

KTI72900$18.95 Normally $19.95

Part No. Description SPECIALKTI72901 15 Piece Punch & Chisel Asst. $39.95 Packaged in a plastic tray

KTI72901K 15 Piece Punch & Chisel Asst. $36.95 with kit bag organizer

4 Piece Brass Punch SetIncludes: 3/8”, 1/2”, 5/8” and 3/4” diameter puncheswith knurled handles. Made in USA. Normally $89.42

KTI72980$84.95

MM Canada Q1 2015_Layout 1 1/7/15 8:48 AM Page 5

Create Double, Single andBubble flares in seconds

TUBING TOOLS

TEST & BLEED

RIVET TOOLS

SERPENTINE BELT TOOLS

SPARK PLUG REPAIR

6

70301 70303 703067030470302

2 and 3 Jaw Reversible PullersThe reversible jaws feature a wide face on one end and a narrow face on the other. Jaws griptighten as pressure is applied. Drop forged. Alloy steel, hardened to 45 HRc. Lifetime guarantee.

70305

71501 71502

PULLING TOOLS

BALL JOINT & TIE ROD TOOLS

Bearing SeparatorsRemove generator gears, bearing cones, bearings and other similarparts. Designed to reduce risk of damage to the part. Flush knife-edge blades get behind work when most puller jawscannot fit or grip.

Universal Nut Splitter• Medium Duty Nut Splitter• Rugged drop forged frame• Splits rusted or frozen nuts 1/8" to 15/16" across flats• Parallel action of pusher cracks nuts on one side withoutdamage to bolt threads

• Compound angle design with 360 degree rotating cutterallows use in difficult to reach locations

KTI70715$32.95Normally $34.68

Ball Joint Service Tool and Master Adapter Set• For removing and replacing ball joints• Remove and replace universal joints by using the C-Frame press• Includes one live center forcing screw, receiver tubes, andremoving/installing adapters

• Works on most Ford, GM, and Dodge 2 and 4 wheel drive pickups,vans and sport utility vehicles through 1997.

KTI71556$184.95 Normally $194.68

Hydraulic Flaring Tool Kit• Create precision 45 degree double, single and bubble flares in seconds

• Brake flaring tool works with stainless steel, steel, and soft metal tubing

• Use for brake lines, transmission cooler lines, and fuel lines• Kit contains: brake flare forming tool, 3/16" and 1/4" tube retainingdies, adapters, handle, user manual, and storage/carrying case

KTI70082$239.95Normally $252.58

ADHESIVE

Bonds AlmostAnythingin Seconds

17” Super Duty Hand RiveterHand Riveter, Super Duty, with 5 Nosepieces. 17" Long Handles.Nose pieces: 1/8", 5/32", 3/16", 7/32" and 1/4". Normally $52.58

KTI79110$49.95

Pulley Puller & Installer SetComplete set removes and installsmost power steering and alternatorpulleys on domestic vehicles. Workson V-shaped pulleys and serpentinebelt system pulleys. Normally $57.84

KTI70300$54.95

Harmonic Balancer InstallerEasily install balancers and drive pulleys. Includes eight threadedadapters: 7/16”-20, 1/2”-20, 9/16”-20, 5/8”-20, 3/4”-16, M12-1.5, M14-1.5 and M16-2.0. Made in USA.

KTI70343$64.95Normally $68.37

Steering Wheel PullerPrevents damage to steering shaft threads. Will remove the steering wheel from most passenger cars & light/medium duty trucks.Contains five sets of side bolts. Made in USA.

KTI70330$23.95 Normally $25.21

Harmonic Balancer PullerThis puller will pull harmonic balancers on most automobiles. It will pull parts with tapped holes like flywheels, gears and pulleys.Tool includes 5 sets of side bolts. Made in USA.

KTI70344$28.95Normally $30.47

Pitman Arm Puller - ProfessionalThe heavy duty yoke is drop forged from alloy steel. Both the yoke and the center screw are heat treated. Made in USA. Normally $27.32

KTI70365$25.95

Part No. Description SIZE REACH SPREAD TONNAGE Normally SPECIALKTI70301 2 Jaw Reversible Puller 3” 3-1/4” 4” 2 Ton $21.00 $19.95KTI70302 2-3 Jaw Reversible Puller 3” 3-1/2” 4-3/4” 2 Ton $22.05 $20.95KTI70303 2 Jaw Reversible Puller 4” 3-1/4” 6” 5 Ton $26.26 $24.95KTI70304 2-3 Jaw Reversible Puller 4” 3-1/4” 7” 5 Ton $31.53 $29.95KTI70305 2 Jaw Reversible Puller 6” 3-1/4” 6” 5 Ton $34.68 $32.95KTI70306 2-3 Jaw Reversible Puller 6” 3-1/4” 7” 5 Ton $38.89 $36.95

Serpentine Belt ToolReleases tension on serpentine belts with a spring loaded idler pulley. Used to remove and install serpentine belts.Fits idler pulleys requiring 13mm, 15mm, 16mm, 18mm hex or 3/8” square drive socket sizes.

KTI70720$34.95 Normally $36.79

Rear Axle Bearing Puller SetMake easy work of removing semi-floating rear axle bearings. 3 sizes to service most domestic cars. Use with slide hammer.

KTI70380$46.95Normally $49.42

Heavy Duty Dent Puller KitIncludes 10 lb. Slide Hammer, 2 Pipes (one 2 hole and one hex nut),chain with hook and 5 Plate puller attachments.

KTI70500$134.95 Normally $142.05

Tie Rod End ToolAble to remove the inner tie rod without removing the outer tie rod.Simply slide the tool over the tie rod end and tighten the collar toallow access with an extension. Works with a 3/8” drive extension. Fits most inner tie rods.

KTI71519$22.95 Normally $24.16

Part No. Description Normally SPECIALKTI71501 Tie Rod Separator $14.68 $13.95 11/16” Opening between tines

KTI71502 Ball Joint Separator $14.68 $13.95 15/16” Opening between tines

Slide Hammer Puller KitEasy removal of flange-type axles, oil seals, bearings and otherpress fit parts. Includes 5 lb. Slide Hammer, 8 function 3 Jaw Puller,2 Jaw Puller, Puller Hook, Rear Axle Puller, Dent Puller and Grip Wrench Adapter.

KTI70510$134.95 Normally $142.05

Tubing BenderBend copper, steel or aluminum tubing without collapsing or kinking.Bends 3/16”, 1/4”, 5/16” & 3/8”. Normally $18.89

KTI72320$17.95

Double Flaring Tool KitIncludes 7 adaptors. For brake and fuellines. Adapters: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, and 5/8”.

KTI70060$29.95 Normally $31.53

Professional Double Flaring Tool KitProvides safer flare for brake and fuel lines. Center screw is made of high grade alloy steel and swivel is heat treated,precision ground and plated to reduce friction. Includes 5 adapters(3/16”, 1/4”, 5/16”, 3/8” and 1/2”) each stamped with the size foreasy identification. Made in USA.

KTI70080$29.95 Normally $31.53

Miniature Tubing CutterCuts 1/8” to 5/8” OD tubing. Compact size for use in confinedareas. Features rollers to ease operation.

KTI72310$6.95 Normally $7.32

Heavy Duty Tubing CutterCuts 1/8” to 1-1/8” OD tubing.

KTI72330$13.95 Normally $14.68

Heavy Duty Tubing BenderBends 1/4”, 5/16” and 3/8” OD aluminum, steel and copper tubing.

KTI72340$37.95Normally $39.95

Heavy Duty Tubing Bender PlierBends 3/16”, 1/4”, 5/16” and 3/8” diameter copper and steel tubing without collapsing or kinking.

KTI72345$28.95Normally $30.47

Metric Bubble I.S.O. Flaring Tool KitWill create the I.S.O. flare onbrake lines without removing the brake line from the vehicle. Includes yoke assembly, flaringbar, gauge, wrench and 4 adapters: 4.75mm (3/16”),6mm, 8mm and 10mm.

KTI70085$39.95Normally $42.05

Professional Brake Flaring Tool KitThis brake flaring tool will pay for itself with the first project, and it’ll give you peace of mind knowing that your brake flares are ofOE-precision quality and safety. Mounts in your vise to help you easilyform 45° double, single and bubble flares in OE steel, stainless steel,and soft metal tubing. Use with 3/16”, 1/4”, 5/16” and 3/8” diameterlines...which means it will handle all your plumbing jobs from brakelines to transmission cooler lines and fuel lines. Turret-style design allows you to make those precision flares in minimal time. Brake flaring forming dies are mounted right on the turret, so there’s nofumbling for small parts or missing dies. T-handle screw clamp holdsline in place while forming.

KTI70081$219.95 Normally $231.53

Part No. Description Normally SPECIALKTI70382 Threaded holes 5/8”-18 $61.00 $57.95 Sizes: 0” to 4-1/4”, Made in USA.

KTI70383 Threaded holes 3/8”-16 $34.68 $32.95 Sizes: 0” to 2-1/4”

KTI70384 Threaded holes 5/8”-18 $59.95 $56.95 Sizes: 0” to 4-1/4”

Ford Spark Plug Porcelain Extractor Set • Extract broken porcelain from spark plug sleeves• For use on Ford Triton engines model year 2004 and later• Works in conjuction with KTI Spark Plug Extractor Set• Meets Ford TSB specifications

Uses a special bonding agent to extract porcelain from spark plug sleeve without pushing on the broken plug and potentially pushing itinto the cylinder causing engine damage. Works in conjunction withthe KTI spark plug extractor set (KTI75201). Meets Ford TSB specifications. Lifetime warranty.

KTI75202$24.95 Normally $26.26

Ford Triton Spark Plug Extractor• Extract frozen and broken off spark plug sleeves• For use on Ford Triton engines model year 2004 and later• Specially machined guide works with extra-long tap and extractor• Avoid potential engine damage• Saves time by doing the job right the first time!

Avoid engine damage by using the KTI spark plug porcelain extractor set (KTI75202) to remove broken porcelain before extracting spark plug sleeve. Lifetime warranty.

KTI75201$72.95Normally $76.79Pilot Bearing

Puller Slide HammerCenter and rod design spreads the forged steel jaws, pushing themout against the bearing. Jaw spread 1/2” to 1-1/2” capacity. Made in USA.

KTI70356$39.95 Normally $42.05

Pilot Bearing PullerUse to remove fly wheel pilot bearings 7-1/2” long. Also works as a bearing and bushing puller for generators and starters. 1/2” to 1-1/2” I.D. capacity. Made in USA. Normally $31.53

KTI70355$29.95

Steel Line Stopper Kit• Universal steel line stopper• 5/16", 3/8", 1/2", and banjo fittings (10.4mm and 18mm)• Clamp and seal steel lines for all automotive fluids• Provides an effective seal to steel lines when disconnected

• Prevents fluid loss and contamination of the work area

KTI75306$36.95 Normally $38.89

Automotive Tester and Bleed Kit• Handy for troubleshooting and tune-ups. • Dial gauge indicates pressure in inches and centimeters of mercury • Perform hundreds of automotive diagnostic tests including on fuel petcocks, carburetors & vacuum advance.

• One person brake bleeding kit: bleeds brakes, clutches or other hydraulic systems.

• Bleeding kit includes fittings, hose and 114 page instruction manual.

KTI72261$44.95Normally $47.32

Q-Bond® Adhesive Repair Kit• Rock solid in 10 seconds!• Ultra-strong adhesive and reinforcing powders• Repairs can be grinded, filed, sanded and even painted!• Includes 2 Q-BOND adhesive; 1 black reinforcing powder; 1 grey reinforcing powder

KTI90002$18.95 Normally $19.95

MM Canada Q1 2015_Layout 1 1/7/15 8:49 AM Page 6

Stays flexible in extreme temperatures

NEW

72780

ELECTRICAL

9.75" Professional8-in-1 Quick andEasy Wire Stripper• Wire cutter, bolt cutter, wirestripper, and bending wire

• Crimps insulated, non-insu-lated, and pin terminals

KTI56207$19.95Normally $21.00

Professional Crimping Tools• Crimps non-insulated terminals• Easy to grip handles

Part No. Description Normally SPECIALKTI56203 Crimping Tool $42.05 $39.95 0.5/1.5/2.5/4.0/6.0 MM2

KTI56204 Crimping & Wire Stripper $52.58 $49.95 1.5/2.5/6.0/10/16 MM

8.5" Professional Multi Purpose Crimper and Wire Stripper• Wire cutter, bolt cutter, and wire stripper in one

• Crimps open barrel terminals• 3.2mm thickness

KTI56202$18.95Normally $19.95

6/12 Volt Circuit TesterExtra Long 48” Lead, Clear Handle.

KTI72770$4.95 Normally $5.21

Mini Heavy Duty Circuit Tester• For all 6 or 12 volt systems. • Clear handle, lights up• 5 Foot heavy gauge wire with ground clip

KTI72765$6.95 Normally $7.32

Heavy Duty Circuit Tester• For all 6 or 12 volt systems. • 5 Foot Heavy gauge flexible wire with ground clip and spring strain relief.

• Clear handle, lights up - test result.

KTI72780$10.95 Normally $11.53

Heavy Duty Circuit Tester with 12 Foot Recoil Wire• 6 and 12 volt systems• 12 Foot retractable wire and battery clip• Spring supported strain relief

KTI72782$8.95 Normally $9.42

DISTRIBUTOR

AIR TOOLS

AIR HOSE

ELECTRIC IMPACT

Impact Socket Sets• Chrome Moly Steel construction• Thin wall impact quality sockets• Ideal for rugged, professional, environments• Laser engraved for quick identification• Heat treated 6 Point impact sockets• Blow molded cases, except KTI34200 and KTI34201 are shipped loose

38202

Big Pack Abrasive Cut-Off Discs

700133523339233

Individual Budd Wheel SocketsFor outer cap nuts on Budd style truck wheels. Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments.

33101

Rubber Air HoseSolid brass end MNPT fittings. Protective PVC bend restrictor ends. Abrasion-resistant rubber outer jacket.300 PSI working pressure.

CUT-OFF DISCS BUDD WHEEL

Remove nut & stud with one socket

71303

Abrasive Cut-Off Discs25,000 Rpm maximum speed. Cut mufflers,light metals, fiberglass & more. 3 inch diameter discs with 3/8 inch hole for arbor.

7

IMPACT SOCKET SETS

BluBird Rubber Air Hoses• 100% rubber air hose• Heavy duty, ultra light weight and super strong• BlueBird 3/8" ID, 300 PSI, 1/4" NPT fittings with brass ferrules and a bend restrictor to reduce kinking

• Stays flexible in temperatures from -50 degree to 180 degree Fahrenheit

• Ozone and abrasion resistant EPDM blended cover

Part No. Description Normally SPECIALKTI72014 25 Foot Rubber Air Hose $21.00 $19.95KTI72015 50 Foot Rubber Air Hose $36.79 $34.95

9" Professional Multi PurposeCrimper and Wire Stripper• Wire cutter, bolt cutter, and wire stripper in one• Crimps insulated and open barrel terminals

KTI56201$18.95Normally $19.95

POLISHERS

Professional10 inch Waxer/ Polisher Powerful .65 amp motor. 2,580 rpm (no load). Ball bearing construction. High impact ABS housing. Includes 1 terry cloth bonnet. 110V.

KTI10210$32.95 Normally $34.68

7” Variable Speed Polisher11 Amp electric motor, dial speed control. Variable speed 1000 - 3000 RPM. Overload protection, 3 position side handle, rubberized for better grip and 7” diameter pad. UL listed.

KTI10215$99.95 Normally $105.21

NEW

NEW

NEW

NEW

Part No. Description Pieces Drive Sizes Normally SPECIALKTI32100 Fractional Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8” $31.53 $29.95KTI32200 Fractional DEEP Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8” $42.05 $39.95KTI37100 Metric Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm $31.53 $29.95KTI37200 Metric DEEP Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm $46.26 $43.95KTI33100 Fractional Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4” $62.05 $58.95KTI33101 Fractional Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2” $126.26 $119.95KTI33200 Fractional DEEP Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4” $99.95 $94.95KTI33202 Fractional DEEP Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2” $189.42 $179.95KTI38100 Metric Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm $51.53 $48.95KTI38101 Metric Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm $142.05 $134.95KTI38200 Metric DEEP Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm $78.89 $74.95KTI38201 Metric DEEP Impact Socket Set 9 Piece 1/2” Drive 22mm to 30mm $84.16 $79.95KTI38202 Metric DEEP Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm $231.53 $219.95KTI34100 Fractional Impact Socket Set, 8 Piece 3/4” Drive 1” to 1-1/2” $89.42 $84.95KTI34200 Fractional DEEP Impact Set, no case 8 Piece 3/4” Drive 1” to 1-1/2” $136.79 $129.95

18 Piece 1” Drive Fractional Impact Socket SetFractional short sockets 3/4” to 2”, impact extensions (3” and 6”),and replacement o-rings & pins. 6 Point. Heavy duty storage case.

KTI35100$399.95 Normally $421.00

15 Piece 3/4” Drive Metric Impact Socket SetIncludes metric short sockets from 17mm to 46mm and replacemento-rings & pins. 6 Point. Complete with heavy duty storage case.

KTI39100$219.95 Normally $231.53

Mini Die Grinder25,000 rpm. 1/4” Collet. Features rear exhaust, independent powerregulator and variable speed throttle.

KTI87125$44.95 Normally $47.32

Die Grinder22,000 rpm. 1/4” Collet. 1/2 HP motor, built-in power regulator,variable speed throttle. 5-1/2" over-all length.

KTI87132$48.95 Normally $51.53

Gearless Angle Die Grinder20,000 Rpms. 1/4” collet excepts 1/8”, 1/4”, 3mm and 6mm shanks.Lightweight housing reduces vibration.Overall length: 6-1/4 inches.

KTI87128$63.95 Normally $67.32

Mini Angle Die Grinder20,000 rpm. 1/4” Collet. Features rear exhaust, independent powerregulator and variable speed throttle.

KTI87126$84.95 Normally $89.42

Part No. Description Normally SPECIALKTI71301 25 Pack Cut-Off Discs $36.79 $34.95 3” x 1/16” x 3/8”

KTI71300 50 Pack Cut-Off Discs $73.63 $69.95 3” x 1/16” x 3/8”

Part No. Description Normally SPECIALKTI71303 6 Pack Cut-Off Discs $10.47 $9.95 3” x 1/32” x 3/8”

KTI71306 6 Pack Cut-Off Discs $10.47 $9.95 3” x 1/16” x 3/8”

KTI70013 Drill Arbor for Cut-Off Discs $4.16 $3.955 Piece 1” Drive Budd Wheel Service KitUse with 1” drive impact. Set includes 33mm Hex, 35mm Hex x 17mmSquare Deep, 38mm Hex x 20mm Square Deep, 41mm Hex x 21mmSquare Deep and 1-1/2” Hex x 3/4” Square Deep Budd Wheel Sockets.

KTI35005$119.95 Normally $126.26

PART NO. Description Normally SPECIALKTI39233 3/4” Dr. 33mm Deep Hex $26.26 $24.95KTI35233 1” Dr. 33mm Deep Hex $31.53 $29.95

3 Foot Rubber Whip Hose3/8” ID rubber hose with 1/4” NPT malebrass fittings. 300 PSI. Color: RED.

KTI72000$4.95 Normally $5.21

Swivel End Whip Hoses3/8” ID rubber hose with 1/4” MNPT brass swivel on oneend and 1/4” NPT male brass fitting on the other. 300 PSI. Color: RED. Available in 3 and 6 foot lengths.

KTI72007 3 Foot

$8.95 Normally $9.42

KTI72008 6 Foot

$9.95 Normally $10.47

4 Piece Pneumatic Bit SetIncludes panel cutter, cold chisel, hammer bitand scraper. Made in USA.

KTI81900$54.95 Normally $57.84

Hose Reel 3/8" x 50 Foot• All steel contruction • Slotted mounting base - easy install • Spring powered auto recoil, • 8 position ratchet system• 50 foot red rubber air hose 3/8" I.D. • PVC bend restrictor• Solid brass ferrule, 1/4" male NPT.• 300 PSI

KTI71000$139.95Normally $147.32

7 Piece 1/2" Drive Thin Wall Protective Socket Set• Sockets made of chrome moly steel• Complete set comes in a handy plastic case• Includes: 17mm blue , 19mm gold , 21mm red , 13/16" purple,7/8" green , 1" titanium color, and 1-1/16" black

KTI33300$58.95 Normally $62.05

1/2” Drive Electric Impact7 Amp. 235 ft/lbs. of torque. 2,100 RPM. Complete with an extra set of screw in brushes.

KTI81380$139.95 Normally $147.32

Part No. Description Size Fittings Normally SPECIALKTI72001 Rubber Air Hose - Red 3/8” x 25 Foot 1/4” MNPT $14.68 $13.95KTI72002 Rubber Air Hose - Red 3/8” x 50 Foot 1/4” MNPT $26.26 $24.95KTI72003 Rubber Air Hose - Red 1/2” x 25 Foot 3/8” MNPT $21.00 $19.95KTI72004 Rubber Air Hose - Red 1/2” x 50 Foot 3/8” MNPT $37.84 $35.95KTI72005 Rubber Air Hose - Red 1/2” x 25 Foot 1/2” MNPT $24.16 $22.95KTI72006 Rubber Air Hose - Red 1/2” x 50 Foot 1/2” MNPT $42.05 $39.95KTI72010 Rubber Air Hose - Yellow 3/8” x 25 Foot 1/4” MNPT $17.84 $16.95KTI72011 Rubber Air Hose - Yellow 3/8” x 35 Foot 1/4” MNPT $27.32 $25.95KTI72012 Rubber Air Hose - Yellow 3/8” x 50 Foot 1/4” MNPT $42.05 $39.95

3/8" Drive Distributor Wrench• 1/2" x 9/16" • Use extensions or ratchet• Handles most cars

KTI70600$8.95 Normally $9.42

MM Canada Q1 2015_Layout 1 1/7/15 8:50 AM Page 7

TORQUE ADAPTER

NEW

8

1/2”Drive

Individual 1/2” Drive SocketsTorque lug nuts to specs every time. “DW” refers to Deep Well Socket.

3/4”Drive

1”Drive

Individual 3/4” Drive Heavy Duty TruckTorque Limiting SocketsTorque lug nuts to specs every time.

20-4100

72101

72102

72100Ratcheting Torque WrenchesRatcheting style, “clicks” when torque is achieved. All wrenches complete with molded storage case.

4 Piece Heavy Duty Truck Torque Limiting SetsFor large trucks and heavy equipment. Includes Red (1-1/4” x 250 ft/lbs), Brown (33mm x 475 ft/lbs), Black (1-1/2” x 475 ft/lbs), and Yellow (13/16” square x 475 ft/lbs).Available in 3/4” and 1” Drive.

TIRE TOOLS

TORQUE WRENCHES

TORQUE LIMITING SOCKETS

Click-Style Torque WrenchesThese torque wrenches are extremely accurate and easy-to-use.Simply adjust the torque specification on the wrench by releasingthe red knob and turning the handle of the torque wrench whileholding the shaft of the torque wrench. Features a ball detent socketretainer with push-button release for quick socket changes. Manufactured for accuracy, strength and reliability.

Accurate easy-to-use adjustment

Locking Ringensuresaccuracy

Push-Button Release

Accurately torque wheel lugs tomanufacturers recommendations

Use with 1/2” Dr. Impact Sockets (Not included)

Use with 1/2” Dr. Ratchets (Not included)

Individual 1” Drive

73814

Heavy Duty Tow Straps with Loop EndsHeavy duty nylon web construction with reinforced stitching. For your safety recommended working load should not exceed 1/3 of maximum rated load.

73813

Heavy Duty Tow Straps with Hook EndsHeavy duty nylon web construction with reinforced stitchingand forged hook ends. For your safety recommended workingload should not exceed 1/3 of maximum rated load.

TOW STRAPS 738117381273810

73803

73801 73802

NEWSAFETY FLARES

Digital Torque Adaptor 1/2" drive• Use digital torque adaptor with 1/2" drive ratchet• Static torque measurement• Three standard functions: torque setting, measurementsetting and mode setting

• Operates is clockwise and counter-clockwise directions• Torque range is 29.5 - 147.5 ft-lbs

KTI72138$49.95Normally $52.58

COIL SPRING TOOLS

NEW

NEW

72 Teeth

10 Piece O.E. Torque Limiting Socket SetCovers a completely different list of vehicles from Accutorq’s original 10 piece kit. Includes Orange, Light Blue, Off-White, Mud, Light Tan, Light Yellow, Red-Orange, Quartz Gray, Charcoal, and Light Purple plus case, application chart and instruction sheet. ISO 9001 Certified.

ACC10-0323$349.95 Normally $368.37

PART NO. Individual Sockets SPECIALACC10-0340 14mm Mud, 80 ft/lbs. $35.95ACC10-0304 17mm Green, 55 ft/lbs. $35.95ACC10-0305 17mm Red, 80 ft/lbs. $35.95ACC10-0329 17mm Off-White, 90 ft/lbs. $35.95ACC10-0334 17mm Lt. Yellow, 113 ft/lbs. $35.95ACC10-0306 19mm(3/4”) Yellow, 65 ft/lbs. $35.95ACC10-0307 19mm(3/4”) Blue, 80 ft/lbs. $35.95ACC10-0342 19mm(3/4”) Lt. Tan, 90 ft/lbs. $35.95ACC10-0308 19mm(3/4”) Gray, 100 ft/lbs. $35.95ACC10-0335 19mm Luminous Red DW, 110 ft/lb $35.95ACC10-0341 19mm(3/4”) Quartz, 120 ft/lbs. $35.95ACC10-0313 7/8” Turquoise DW, 140 ft/lbs. $35.95ACC10-0309 21mm Black, 60 ft/lbs. $35.95ACC10-0310 21mm Lt. Brown, 80 ft/lbs. $35.95ACC10-0311 21mm Brown, 100 ft/lbs. $35.95ACC10-0343 21mm Red Orange, 110 ft/lbs. $35.95ACC10-0328 21mm Charcoal DW, 147 ft/lbs. $35.95ACC10-0336 22mm Orange, 75 ft/lbs. $35.95ACC10-0337 22mm Dark Green, 60 ft/lbs. $35.95ACC10-0327 22mm Light Blue, 100 ft/lbs. $35.95ACC10-0312 22mm White DW, 120 ft/lbs $35.95ACC10-0338 22mm Pearl Copper, 110 ft/lbs. $35.95ACC10-0339 22mm Pink, 154 ft/lbs. $35.95ACC10-3898 22mm Lt Purple DW, 160 ft/lbs. $46.95ACC10-3899 24mm Lt. Green DW, 140 ft/lbs. $35.95

8 Piece Torque Limiting Socket SetCovers most cars and mini-vans. Includes Green, Red, Yellow, Blue, Light Brown, Brown, Gray, and Turquoise, application chart and instruction sheet. ISO 9001 Certified.

ACC10-0321$279.95 Normally $294.68

10 Piece Original Torque Limiting Socket SetCovers most cars and light trucks. Includes allGreen, Red, Yellow, Blue, Gray, Light Brown,Brown, White, Turquoise, and Light Green, pluscase, application chart and instruction sheet.ISO 9001 Certified. Lifetime guarantee.

ACC10-0322$349.95 Normally $368.37

ACC20-4100 3/4” Drive 4 Pc. HD Truck Set $529.95ACC20-4000 1” Drive 4 Pc. HD Truck Set $529.95

Part No. Description Torque Range Over-all Length Normally SPECIALKTI72140 3/8” Drive Click-Style Torque Wrench 50-250 in/lbs. 8-3/4” $63.11 $59.95KTI72143 3/8” Drive Click-Style Torque Wrench 10-100 ft/lbs. 16-1/4” $67.32 $63.95KTI72141 1/2” Drive Click-Style Torque Wrench 30-150 ft/lbs. 18-3/4” $84.16 $79.95KTI72142 1/2” Drive Click-Style Torque Wrench 30-250 ft/lbs. 21-1/2” $89.42 $84.95KTI72145 3/4” Drive Click-Style Torque Wrench 100-600 ft/lbs. 39” $421.00 $399.95

Part No. Description Normally SPECIALKTI72100 3/8” Dr. Torque Wrench $47.32 $44.95 Torque Range: 20 to 200 in/lbs.

KTI72101 1/2” Dr. Torque Wrench $59.95 $56.95 Torque Range: 10 to 150 ft/lbs.

KTI72102 1/2” Dr. Torque Wrench $93.63 $88.95 Torque Range: 25 to 250 ft/lbs.

Tire Inflator GaugeRange from 10 to 120 lbs. shown in 2 lb. increments, 15” air hose with 1/4” female NPT, 6” chrome-plated dual-head chuck and 3/8” - 24 thread air inlet. Weatherproof aluminum body with corrosion-resistant brass valve. Withstandseveryday use and abuse. Gauge and valve cartridges are replaceable.Magnifying bubble lens. Angled tip makes it easy to inflate tires ontrucks with dual wheels.

KTI89002$44.95Normally $47.32

Locking Lug Nut Remover KitRemoves locking lug nuts and lockinghubcaps on most vehicles. For use withimpact wrenches.

KTI71910$82.95 Normally $87.32

4-Way Lug WrenchesSAE Wrench. Sizes: 11/16”, 3/4”, 13/16”, and 7/8”. Chrome plated.

KTI71940METRIC Wrench. Sizes: 17mm, 19mm, 21mm, 23mm. Chrome plated.

KTI71980Normally $13.63

Your Choice $12.95

7 Piece Torque Extension Set• 1/2" Drive torque extension set • Set includes: 55 ft/lb red color, 65 ft/lb yellow color, 80ft/lb green color, 100 ft/lb light blue color, 120 ft/lb white color, 140 ft/lb black color, 175ft/lb orange color.

KTI33350$84.95 Normally $89.42

PART NO. 1” Drive Sockets SPECIALACC20-3908 1-1/4” Red, 250 ft/lbs. $143.95ACC20-3909 33mm Brown, 475ft/lbs. $143.95ACC20-3910 1-1/2” Black, 475 ft/lbs. $143.95ACC20-3911 13/16” Square Yellow, 475 ft/lbs. $143.95ACC20-3913 33mm Greyline, 550 ft/lbs. $143.95

1/4" Drive Torque Wrench• Fast, accurate and easy to use, color coded English/Metric settings• Reversible ratchet head for torquing left or right handed fasteners• Ball bearing mounted internal torque mechanism for accuracy andprolonged calibration life

• Capacity: 20-100 in./lbs. • Overall length: 8-3/4"• Made in the U.S.A. • Packaged in a blow molded case

KTI72118$139.95Normally $147.32

1/4" Drive Torque Wrench• Ratcheting style torque wrench "clicks" when torque achieved• Capacity: 30-150 in./lbs. • Overall length: 7-3/4"• Packaged in a blow molded case

KTI72117$64.95 Normally $68.37

Digital Air Inflator• Range of 2 to 150 psi with 0.1 psi resolution• Boasts a dual head chuck and is accurate to within ±1% + 0.5psiat 100psi and ±2% + 0.5psi at 150psi

• Programmed to work with various units of measurement(psi/bar/kpa/kg/cm2)

• Works on TPMS equipped wheels• Features include a large face LCD digital display, anti-oil rubbercasting and ergonomic grip

Rugged die-cast body. Backlit monitor is powered by two replaceable 3V lithium batteries.

KTI89001$79.95Normally $84.16

Part No. Description Size Capacity Regular SPECIALKTI73810 Tow Strap w/ Loop Ends 2” Wide x 20 Feet Long 15,000 lb. max $38.89 $36.95KTI73811 Tow Strap w/ Loop Ends 3” Wide x 20 Feet Long 22,500 lb. max $61.00 $57.95KTI73812 Tow Strap w/ Loop Ends 3” Wide x 30 Feet Long 30,000 lb. max $73.63 $69.95KTI73813 Tow Strap w/ Loop Ends 4” Wide x 30 Feet Long 40,000 lb. max $89.42 $84.95KTI73814 Tow Strap w/ Loop Ends 6” Wide x 30 Feet Long 60,000 lb. max $210.47 $199.95

Part No. Description Size Capacity Regular SPECIALKTI73801 Tow Strap w/ Forged Hooks 1-7/8” Wide x 10 Feet Long 7,000 lb. max $15.74 $14.95KTI73802 Tow Strap w/ Forged Hooks 1-3/4” Wide x 15 Feet Long 10,000 lb. max $24.16

$22.95$57.95

Emergency Safety Flare• Applications in automotive, industrial, and marine. • Nine flash patterns including the USCG approved SOS. • For emergency situations & awareness in work areas.• Positive Buoancy• Shatter, crush, and water resistant• Runs up to 100 hours on replaceable CR-123 battery

KTI79800$18.95 Normally $19.95

Rechargeable Emergency Safety Flare• Runtime up to 50 hours depending on flash pattern• Charger adapter included

KTI79801$36.95 Normally $38.89

Digital Torque Wrenches• 72 Teeth• Comes in black blow-molded starage case

Part No. Description Torque Range Over-all Length Normally SPECIALKTI72133 3/8” Drive Digital Torque Wrench 14.5-73.8 in/lbs. 15” $126.26 $119.95KTI72134 1/2” Drive Digital Torque Wrench 29.5-147.5 ft/lbs. 19.375” $136.79 $129.95KTI72135 1/2” Drive Digital Torque Wrench 25-250 ft/lbs. 22.250” $189.42 $179.95

Single Action Coil Spring Compressor Fits most American and some import cars. Normally $63.11

KTI70375$59.95

MacPherson Heavy Duty Strut Spring CompressorWorks with most MacPherson Strut assemblies to quickly assist inreplacement of bent struts, strut tubes and damaged filters.Works on or off the vehicles. Acme threaded screw for durability. Made in USA. Normally $84.16

KTI70371$79.95

Universal Strut Spring CompressorService a wide range of MacPherson struts without any special adapter shoes. Jaws are held by safety locking pins. Springs 4” to 9” O.D. and wire diameter of 7/16” to 11/16”.

KTI70372$259.95Normally $273.63

McPherson Strut Spring Compressor • Works on most MacPherson strut assemblies• Use the compressor when replacing bent strut or strut tube anddamaged spindles

• Acme threaded screw for durability• Not for use on GM "A", "C", "J" or "X" body cars.• Use on or off vehicle • Made in the U.S.A.

KTI70370$39.95Normally $42.05

PART NO. 3/4” Drive Sockets SPECIALACC20-3918 1-1/4” Red, 250 ft/lbs. $143.95ACC20-3919 33mm Brown, 475ft/lbs. $143.95ACC20-3920 1-1/2” Black, 475 ft/lbs. $139.95ACC20-3921 13/16” Yellow, 475 ft/lbs. $139.95

MM Canada Q1 2015_Layout 1 1/7/15 8:50 AM Page 8