Medical Equipment Furniture - DeVats...> Hospital Bed with inbuilt pullout backrest > Back rest adjustable upto 30 degrees in 3 steps of approx 10 degrees > Mattress platform rigid

Furniture

MedicalEquipment

&

DeVats India Pvt Ltd, founded in 1995 , offers expertise in the area of hospital furniture and medical supplies. We are an ISO 9001: 2008 certified company and our products are CE certified.

Our range of customers is wide extending from Nigeria and South Africa to buyers in the UK. Our products undergo rigorous inspections at various stages of manufacturing , both in-house and by independent agencies. For example, we have been inspected by Crown Agents, UK and met their standards without any difficulty.

The products can be standardized ones or custom specified. Typically, on receipt of the order, we develop the technical drawings according to the specifications and quality parameters. The drawings also give the necessary specifications like pre-treatment of the metal surfaces , painting and buffing specifications etc.

Our pre-treatment of mild steel components comprises of the eight – stage process as given in the flow chart below :-

The above process ensures very high quality and durable paint surfaces.

The rigorous and intense control systems which we apply on the hospital furniture come to us through our experiences in the additional businesses of pharmaceutical formulations and specialty products in oncology. These two businesses also comprise our existing operations and we can be of service in these areas too.

INTRODUCTION

Degreasing De-rustingWater rinse Water rinse

Passivation PhosphatingWater rinse Pre Activation

1. Mild Steel Epoxy Powder Coated Pipe 2. Mild Steel Epoxy Powder Coated Mesh3. Antistatic Castors /Antistatic Rubber Shoes

Features

| email: [email protected]

> Hospital Bed with inbuilt pullout backrest > Back rest adjustable upto 30 degrees in 3 steps of

approx 10 degrees > Mattress platform rigid steel mesh size of maximum

40 x 40mm > Mild Steel Epoxy Powder Coated finish

> Mounted on 4 x125mm antistatic castors, 2 with brakes

> Supplied in knock down condition, complete with instructions and tools for assembly

> Safe Load capacity 180 Kg > Head end and foot end height 1100mm and 900 mm

respectively

Material/CoMponents

serviCe ContraCtavailable

HOSPITAL BEDMODEL NO. : HB-1M Overall Dimensions (LxWxH) : 2200x 900x 550mm

Hb: 1M-sp: Mattress platform steel sheet with perforations

options

Features

Hb: 2M-C: Mounted on 4x125mm antistatic castors, 2 with brakes

email: [email protected] |

HOSPITAL BEDMODEL NO. : HB-2M Overall Dimensions (LxWxH) : 2000x 900x 550mm

> Hospital Bed with tubular head and foot boards > Mattress platform steel sheet with perforations > Mild Steel Epoxy Powder Coated finish > Mounted on antistatic rubber shoes > Supplied in knock down condition, complete with

instructions and tools for assembly

> Safe Load capacity 180 Kg > Head end and foot end height 1100mm and 900 mm

respectively

Material/CoMponents

1. Mild Steel Epoxy Powder Coated Pipe 2. Mild Steel Epoxy Powder Coated Sheet 3. Antistatic Castors/ Antistatic Rubber Shoes

options


1. Mild Steel Epoxy Powder Coated Pipe 2. Mild Steel Epoxy Powder Coated Sheet 3. Antistatic Castors/ Antistatic Rubber Shoes

Features


> Hospital Bed with inbuilt pullout backrest > Mounted on antistatic rubber shoes > Mattress platform steel sheet with perforations > Mild Steel Epoxy Powder Coated finish

> Supplied in knock down condition, complete with instructions and tools for assembly

> Head end and foot end height 1100mm and 900 mm respectively

> Safe Load capacity 180 Kg

Material/CoMponents


HOSPITAL BEDMODEL NO. : HB-3MOverall Dimensions (LxWxH) : 2200x 900x 550mm

Hb-3M-C: Mounted on 4x125mm antistatic castors, 2 with brakes

Hb-3M-WM: Mattress platform rigid steel mesh size of maximum 40 x 40mm.

options

Features

Hb: 5M: With tubular head and foot board

HOSPITAL BED- FOWLER MODEL NO. : HB-4MOverall Dimensions (LxWxH) : 2060x 900x 600mm

> Hospital Fowler Bed with ABS head and foot board > Fowler positions are maneuvered by separate screws

located at the foot end > Supplied with collapsible side railings and telescopic

I.V. Rod > Mattress platform steel sheet with perforations

> Mild Steel Epoxy Powder Coated finish > Mounted on 4 x125mm antistatic castors and 2 with

brakes > Supplied in knock down condition, complete with

instructions and tools for assembly > Safe Load capacity : 180Kg

Material/CoMponents

1. Mild Steel Epoxy Powder Coated pipe2. Mild Steel Epoxy Powder Coated Sheet3. Collapsible side railings4. ABS Head and Foot Boards5. Screw for position adjustment 6. Antistatic Swivel Castors 7. Stainless Steel grade 304 I.V. Rod

options


HeiGHtADJUSTABLE


1. Mild Steel Epoxy Powder Coated Pipe2. Mild Steel Epoxy Powder Coated Sheet3. Screw for position adjustment 4. Antistatic Swivel Castors /Antistatic Rubber Shoes5. Stainless Steel Grade 304 I.V. Rod6. Laminated Wooden panels

Features


> Hospital Semi Fowler Bed > Detachable Laminated head and foot board on

stainless steel frame > Semi Fowler positions are maneuvered by screws

located at the foot end > Supplied with telescopic I.V. Rod

> Mattress platform steel sheet with perforations > Mild Steel Epoxy Powder Coated finish > Mounted on 4 x125mm antistatic castors, 2 with

brakes > Supplied in knock down condition, complete with

instructions and tools for assembly > Safe Load capacity : 180Kg

Material/CoMponents


HOSPITAL BED- SEMI FOWLER MODEL NO. : HB-7M Overall Dimensions (LxWxH) : 2060x 900x 600mm

Hb-6M: Detachable ABS head and foot board Hb-8M: Tubular Head and foot board

7. Stainless Steel Grade 304 Frame for head and foot board

options

Features

Custom size mattress also availableStitched covers with zippers are also available

MATTRESS FOR HOSPITAL BED (PLAIN)MODEL NO. : M26-RFS Overall Dimensions (LxWxH) : 200x90x125mm

> Mattress for hospital bed with sealed water resistant and flame retardant covering

> It is simple to clean and easy to use

> Polyurethane foam with minimum 21-30kg/m3 density

> Safe Load Capacity : 180Kg

Material/CoMponents

1. Polyurethane Foam2. Water resistant and flame retardant cover

options



1. Mild Steel Epoxy Powder Coated tubular pipe2. Plywood Base3. Antistatic Rubber shoes4. PU foam5. Water resistant and flame retardant vinyl covering

Features


> Safe working load capacity of 180Kg > Examination Table two section with adjustable

head section > Upholstered top of foam density 21-25kg/m3 and

30mm thickness. Covered with water resistant and flame retardant vinyl Material

> Mounted on 4 antistatic rubber shoes > Mild Steel Epoxy Powder Coated finish > Supplied in knock down form, complete with tools

and instructions for assembly

Material/CoMponents


EXAMINATION TABLE TWO SECTIONMODEL NO. : EXT- 1M Overall Dimensions (LxWxH) : 1830x510x810 mm

eXt- 2M: With removable mattress eXt- 4M: With one drawer under the top

options

Features

eXt-7M : Mounted on 4x125 mm antistatic castors, 2 with brakes

EXAMINATION TABLE TWO SECTIONMODEL NO. : EXT- 3M Overall Dimensions (LxWxH) : 1800x550x800 mm

> Safe working load capacity of 180Kg > Examination Table two section with adjustable

head section > Removable mattress with foam density 21-25kg/m3

and 30mm thickness. Covered with water resistant and flame retardant vinyl Material

> Mounted on 4 antistatic rubber shoes

> Mild Steel Epoxy Powder Coated finish > Supplied in knock down form, complete with tools

and instructions for assembly > Supplied with Lithotomy poles stainless steel

covered with canvas strap or knee ruches

Material/CoMponents

1. Mild Steel Epoxy Powder Coated tubular pipe2. Mild Steel Epoxy Powder Coated Sheet3. Antistatic Rubber shoes4. PU foam5. Water resistant and flame retardant vinyl covering6. Lithotomy poles with canvas strap

options



1. Mild Steel Epoxy Powder Coated tubular pipe2. Mild Steel Epoxy Powder Coated Sheet 3. Plywood base4. Antistatic Rubber shoes5. PU foam6. Water resistant, easily washable and flame

retardant covering

Features


> Examination Couch two section with adjustable head section with pneumatic gas spring. Upholstered top of foam density 21-25kg/m3 and with water resistant, easily washable and flame retardant vinyl covering

> With three drawers and a cabinet underneath > Supplied with arm rests , adjustable tray for BP

instrument and IV hook rod

> Mounted on 4 antistatic rubber feet > Mild Steel Epoxy Powder Coated finish > Supplied in knock down form, complete with tools

and instructions for assembly > Safe working load capacity of 180Kg

Material/CoMponents


EXAMINATION COUCH TWO SECTIONMODEL NO. : EXT- 5M Overall Dimensions (LxWxH) : 1830x510x810 mm

eXt- 6M : With 4x125mm antistatic castors

7. Stainless Steel grade 304 rod

options

Features

FsD-2M: Mild Steel Epoxy Powder Coated finish

FOOT STEP DOUBLE MODEL NO. : FSD-2S-Stainless Steel Overall Dimensions (LxWxH) : 460x510x460 mm

> Foot Step, double step > Top with ribbed Aluminum threads to prevent

slipping > Mounted on 4 antistatic rubber feet

> Stainless Steel high polish finish > Supplied in knock down form, complete with tools

and instructions for assembly > Safe Load capacity : 180 Kg

Material/CoMponents

1. Stainless Steel Grade 304 Tubular pipe2. Stainless Steel Grade 304 Sheet3. Aluminum Strips4. Antistatic Rubber shoes

options



1. Stainless Steel Grade 304 Tubular pipe2. Stainless Steel Grade 304 Sheet3. Rubber Sheet 4. Antistatic rubber shoes

Features


> Foot Step, double step > Top with non slip rubber > Mounted on 4 antistatic rubber feet > Stainless Steel high polish finish

> Supplied in knock down form, complete with tools and instructions for assembly

> Safe Load capacity : 180 Kg

Material/CoMponents


FOOT STEP –DOUBLEMODEL NO. : FSD-1S-Stainless SteelOverall Dimensions (LxWxH) : 450x500x400 mm

FsD-1M: Mild Steel Epoxy Powder Coated finish

options

Features

Fss-1M: Mild Steel Epoxy Powder Coated finish

FOOT STEP -SINGLEMODEL NO. : FSS-1S-Stainless SteelOverall Dimensions (LxWxH) : 400x200x210 mm

> Foot step single with non slip rubber top > Mounted on 4 antistatic rubber feet

> Stainless Steel high polish finish > Safe Load capacity : 180 Kg

Material/CoMponents

1. Stainless Steel Grade 304 Tubular pipe2. Stainless Steel Grade 304 Sheet3. Rubber sheet 4. Antistatic Rubber shoes

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet3. Stainless Steel Grade 304 bars4. Antistatic rubber shoes/Antistatic Castors5. PU Foam6. Water resistant and flame retardant covering 7. Knee crutches

Features


> Delivery bed, two sections > Leg section recessed under body section > Leg section mounted on 2 x 100 mm antistatic

castors with brakes > Body section mounted on 4 antistatic black rubber

shoes > Supplied with mattress and two adjustable knee

crutches with rotary clamps

> 3 sectioned Mattress with PU foam of minimum 21-25kg/m3 density and 30mm thickness

> Mattress Covering made of water resistant and flame retardant covering


and instructions for assembly > Safe Load capacity : 180 Kg

Material/CoMponents


DELIVERY BEDMODEL NO. : DB2-1S Dimensions (LxWxH) : Body section : 1000 x 800 x750mm Leg section : 900 x 670x 660mm

Db2-1M: Mild Steel Epoxy Powder Coated

options

Features

lb3-4M: Mild Steel Epoxy Powder Coated finish

DELIVERY BED -THREE SECTIONSMODEL NO. : LB3-4S – Stainless SteelOverall Dimensions (LxWxH) : 1800x800x800 mm

> Delivery Bed three sections > With adjustable back rest > Leg section able to varying positions > Support ring for bowl and supplied with stainless

steel bowl , capacity 4 litres > Supplied with two adjustable stainless steel knee

crutches with rotary clamps > 3 sectioned Mattress with PU foam with minimum

21-25kg/m3 density and 30mm thickness


> Mounted on 4 antistatic black rubber shoes. > Stainless Steel high polish finish > Supplied in knock down form, complete with tools

and instructions for assembly > Safe load capacity : 180Kg

Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet3. Stainless Steel Grade 304 bars4. Antistatic rubber shoes5. PU Foam6. Water resistant and flame retardant covering7. Knee crutches8. Stainless Steel Grade 304 bowl

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet3. Stainless Steel Grade 304 bars4. Stainless Steel Grade 304 bowl5. Stainless Steel Grade 304 lithotomy poles or knee

crutches6. Antistatic castors/Antistatic rubber shoes

Features


> Delivery Bed three sections > Head section adjustable on ratchet > Foot section can be recessed under body section > Trendelenburg and Reverse Trendelenburg positions > Pelvic section cut out fitted with stainless steel bowl,

capacity 4 litres > Stainless Steel side rails for each side of bed > 3 sectioned Mattress with PU foam with minimum

21-25kg/m3 density and 30mm thickness


> Supplied with Stainless steel I.V. pole > Supplied with Stainless Steel lithotomy poles with

straps or knee crutches > Stainless Steel high polish finish. > Mounted on 4 antistatic rubber shoes. > Supplied in knock down form, complete with tools

and instructions for assembly. > Safe Load Capacity : 180Kg

Material/CoMponents


DELIVERY BED-THREE SECTIONSMODEL NO. : LB3-1S –Stainless SteelOverall Dimensions (LxWxH) : 1900 x 800 x 800 mm


7. PU foam8. Water resistant and flame retardant covering

options

Features

DELIVERY BED – THREE SECTIONSMODEL NO. : LB3-2S-Stainless Steel Overall Dimensions (LxWxH) : 1800 x 800 x 800 mm

> Delivery bed three sections with adjustable head section on ratchet

> Pelvic section cut out fitted with stainless steel bowl, capacity 4 litres

> Upholstered top with PU foam of minimum 21-25 kg/m3 density and 30 mm thickness

> Covering made of water resistant and flame retardant covering

> I.V. pole and pair of stainless steel lithotomy poles with straps or knee crutches

> Stainless Steel high polish finish > Mounted on 4 antistatic rubber shoes > Supplied in knock down form, complete with tools

and instructions for assembly > Safe Load capacity : 180Kg

Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 bars3. Stainless Steel Grade 304 bowl4. Stainless Steel Grade 304 lithotomy poles or knee

crutches5. Plywood6. Antistatic rubber shoes


7. PU foam8. Water resistant and flame retardant covering

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet 3. PU foam4. Water resistant and flame retardant cover5. Bumpers6. Antistatic Swivel Castors

Features


> Patient trolley with detachable stainless steel top > The upper part of the trolley is detachable where

necessary for ambulance transport > Utility tray provide in the lower part of the patient

trolley > Supplied with side rails and IV pole > Mounted on 4 x 200mm swivel antistatic castors,

two with brakes

> Stainless Steel high polish finish > Supplied in knock down condition, complete with

instructions and tools for assembly > Safe load capacity : 180Kg > Mattress with PU foam of minimum 21-25kg/m3

density and 30mm thickness > Mattress Covering made of water resistant and

flame retardant covering

Material/CoMponents


PATIENT TROLLEYMODEL NO. : PT-1S-Stainless Steel Overall Dimensions (LxWxH) : 1900x600x800mm

pt-1M: Mild Steel Epoxy powder coated and top made of stainless steel grade 304

options

Features

No of shelves and size of the cabinet can be increased or decreased as per the requirement

DRUGS CABINETMODEL NO. : DC-1M-Mild Steel Overall Dimensions (WxDxH) : 500 x 450 x 1900 mm

> Drugs cabinet, heavy duty with seamless welded construction

> With single door and 6 adjustable & removable shelves

> Single point lock and 2 keys > Security 6 lever locking system

> Fixing holes for wall fixing in the back > Reinforced rear bolts for wall mounting > Supplied with bolts for wall mounting > Red warning light of 240 V > Mild Steel Epoxy Powder Coated finish

Material/CoMponents

1. Mild Steel Epoxy powder coated sheet2. Heavy duty 6 lever locking system with keys3. Handle 4. Hinges 5. Red warning light6. Rear bolts

options



1. Mild Steel Epoxy powder coated sheet2. Heavy duty 6 lever locking system with keys3. Hinges 4. Handles5. Rear bolts

Features


> Drugs cupboard with two separate sections horizontally

> Each section with door, lock and keys > The upper section for tablets and dangerous drugs > Lower section for 500ml and 5 liter stock bottle of

medicines

> Security 6 lever locking system > Set of two keys per section > Reinforced rear bolts for wall mounting > Supplied with bolts for wall mounting > Mild Steel Epoxy Powder Coated Finish

Material/CoMponents


DRUGS CABINETMODEL NO. : DC-2M-Mild Steel Overall Dimensions (WxDxH) : 900 x 300 x 900 mm

Size of the cabinet can be increased or decreased as per the requirementRed warning lights can be supplied as per requirement

options

Features

Size of the cabinet can be increased or decreased as per the requirement

DRUGS CABINET MODEL NO. : DC-3M-Mild Steel Overall Dimensions (WxDxH) : 800 x 300 x 600mm

> Drugs cabinet wall mounting > With two doors and 6 adjustable shelves > Security 6 lever locking system > Set of two keys per section > Reinforced rear bolts for wall mounting

> Supplied with bolts for wall mounting > Red warning light of 240 V > Mild Steel Epoxy Powder Coated finish

Material/CoMponents

1. Mild Steel Epoxy powder coated sheet2. Heavy duty 6 lever locking system with keys3. Hinges 4. Handles5. Rear bolts

options



1. Mild Steel Epoxy Coated sheet2. Mild Steel Epoxy Coated rectangular pipe3. Toughened glass4. Rubber buttons5. Mild steel hinges6. Heavy duty 6 lever non mastered lock with keys

Features


> Instrument cabinet with glass doors > Double door toughened glass panels > 6 adjustable shelves

> Locking doors to be fitted with a three point locking mechanism, secured by a 6 lever locking handle and 2 keys Mild Steel Epoxy Powder Coated finish

Material/CoMponents


INSTRUMENT CABINETMODEL NO. : HC-1M- Mild Steel Overall Dimensions (HxWxH) : 1520 x 910 x 400mm

HC-1M-sp: Instrument cabinet with single panel doorHC-1M-ss: Instrument cabinet with stainless steel grade

304 shelvesSize of the cabinet can be increased or decreased as per

the requirement

options

Features

HC-2M-sp: Instrument cabinet with single panel doorHC-2M-ss: Instrument cabinet with stainless steel grade

304 shelvesSize of the cabinet can be increased or decreased as per the requirement

HOSPITAL CUPBOARDMODEL NO. : HC-2M-Mild Steel Overall Dimensions (WxDxH) : 910 x 400 x 1520 mm

> Hospital cupboard with two doors and six adjustable shelves

> Locking doors to be fitted with a three point locking mechanism, secured by a 6 lever locking handle and 2 keys

> Mild Steel Epoxy Powder Coated Finish

Material/CoMponents

1. Mild Steel Epoxy powder coated sheet2. Heavy duty 3 point locking system with keys3. Locking handle 4. Rubber buttons

options



1. Stainless Steel Grade 304 tubular pipe2. Perfex basket 3. Castors4. PU Foam5. Water resistant and flame retardant covering

Features


> Baby cot Stainless Steel frame and Perspex transparent basket

> Mounted on 4x100 antistatic castors, 2 with brakes > Stainless Steel high polish finish > Supplied in knock down form complete with tools


> Supplied with mattress > Mattress PU Foam density 21-25 Kg/m3 and

thickness 80mm > Mattress covering made of water resistant and flame

retardant covering > Safe Load capacity : 35Kg

Material/CoMponents


BABY COT MODEL NO. : BC-2S-Stainless Steel Overall Dimensions (LxWxH) : 900x500x 900 mm

bC-4M: Mild Steel Epoxy Powder Coated construction

options

Features

Antistatic castors can also be supplied as per requirement

BABY COT MODEL NO. : BC-3M-Mild Steel Overall Dimensions (LxWxH) : 1370x760x 600 mm

> Baby cot with mattress and sliding side rails > Top made of perforated Steel Sheet > Drop down side rails > Head and Foot Support with equal height for safety. > Mounted on 4 antistatic rubber shoes > Mattress PU Foam density 21-25 Kg/m3 and

thickness 80mm

> Mattress covering made of water resistant and flame retardant covering

> Mild steel Epoxy Powder Coated finish > Supplied in knock down form complete with tools

and instructions for assembly > Safe load capacity :80Kg

Material/CoMponents

1. Mild Steel Epoxy Powder Coated Tubular pipe2. Mild steel Epoxy Powder Coated perforated sheet3. Antistatic rubber shoes4. PU Foam 5. Water resistant and flame retardant covering

options



1. Mild Steel Epoxy Powder Coated Tubular pipe2. Mild steel sheet3. Castors4. IV Pole 5. PU Foam6. Washable covering

Features

bC-1s : Stainless steel grade 304 construction


> Baby Cot -2 cranks , fixed height and with mattress > Back raising 80° and Knee raising 35° by telescopic

mechanism > Drop down side rails and Head and Foot Support

with equal height for safety > Mounted on 4 x100 mm antistatic castors, 2 with

brakes > Supplied with I.V. Pole and 2 sectioned mattress

> Mattress with PU foam density 21-25Kg/m3 and thickness 75mm

> Mattress covering made of water resistant and flame retardant material

> Mild steel Epoxy Powder Coated finish > Supplied in knock down form complete with tools

and instructions for assembly > Safe load capacity 80.00 Kg

Material/CoMponents


BABY COT MODEL NO. : BC-1M Overall Dimensions (LxWxH) : 2000x820x 1300 mm

options

Features

Wt-1s: With fixed ShelvesWt-2s: With fixed Shelves and upturned edges

INSTRUMENT TROLLEYMODEL NO. : WT-3S-Stainless Steel Overall Dimensions (LxWxH) : 460x460x870mm

> Instrument trolley with 2 shelves > Shelves are removable, reversible and surrounded on

three side by side guards with cut-away corners > Height of the lower shelf from the floor is 420mm

approx > Mounted on 4x100mm antistatic swivel castors, two

with brakes


and instructions for assembly > Safe load capacity of each shelf : 75 Kg

Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet3. Stainless Steel Grade 304 bars4. Antistatic swivel castors

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 sheet3. Antistatic swivel castors

Features


> Utility trolley, with two removable stainless steel shelves

> Shelves are s side upturned 20mm edges > Mounted on 4x100 mm antistatic swivel castors, 2

with brakes



Material/CoMponents


UTILITY TROLLEYMODEL NO. : WT-4S Overall Dimensions (LxWxH) : 910x460x870mm

Features

DRESSING TROLLEYMODEL NO. : WT-5S-Stainless SteelOverall Dimensions (LxWxH) : 760x510x820mm

> Dressing trolley with 2 fixed sterilizable shelves > Supplied with Stainless Steel bucket of 12 Liter

capacity > Supplied with Stainless steel bowl of 4 liter capacity > Mounted on 4x100 antistatic swivel castors, 2 with

brakes

> Stainless Steel high polish > Supplied in knock down form, complete with tools


Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 Sheet 3. Antistatic Castors 4. Stainless Steel Grade 304 bowl 5. Stainless Steel Grade 304 bucket 6. Stainless Steel Grade 304 bars



1. Mild Steel Epoxy Powder Coated rectangular pipe2. Mild Steel Epoxy Powder Coated Sheet 3. Stainless Steel Grade 304 bars4. Stainless Steel Grade 304 Sheet 5. Antistatic castors 6. Handle

Features


> Bedside locker with lower cupboard with one shelf, and top drawer

> Supplied with towel rail at the back of the locker > Stainless Steel top

> Mounted on 4 antistatic swivel castors, two with brakes

> Mild Steel Epoxy Powder Coated

Material/CoMponents


BEDSIDE LOCKER MODEL NO. : BSL -4M-Mild Steel Overall Dimensions (LxWxH) : 400x400x700mm

bsl -4M-stainless steel: Stainless Steel grade 304 construction

options

Features



> Bedside locker with lower cupboard > Stainless Steel top

> Mounted on 4 antistatic rubber shoes > Mild Steel Epoxy Powder Coated

Material/CoMponents

1. Mild Steel Epoxy Powder Coated rectangular pipe2. Mild Steel Epoxy Powder Coated Sheet 3. Stainless Steel Grade 304 Sheet 4. Antistatic rubber shoes5. Handle

options



1. Mild Steel Epoxy Powder Coated rectangular pipe2. Mild Steel Epoxy Powder Coated Sheet 3. Stainless Steel Grade 304 Sheet 4. Antistatic castors 5. Handle

Features


> Bedside locker with lower cupboard and top drawer > The lower part having the provision to keep the

shoes > The rear back has a rack for bottles > Supplied with towel rail at the back of the locker

> Stainless Steel top > Mounted on 4x50mm antistatic castors, 2 with

brakes > Mild Steel Epoxy Powder Coated

Material/CoMponents




options

Features

lH-2s: Stainless Steel grade 304 construction lH-1M: Mild Steel construction having provision for 2

bags lH-2s: Stainless Steel grade 304 construction having

provision for 2 bags

LINEN TROLLEY MODEL NO. : LH-2M- Mild Steel-Single

> Linen trolley with single ring > Each ring to take Terylene/ canvas bag of 450mm

diameter

> Mounted on 3x100mm antistatic swivel castors

Material/CoMponents

1. Mild Steel Epoxy Powder Coated tubular pipe2. Antistatic swivel castors 3. Terylene/Canvas Bag

options



1. Mild Steel Epoxy Powder Coated sheet2. Mild Steel Epoxy Powder Coated tubular pipe3. Canvas/Terylene bag 4. Antistatic castors

Features


> Soiled linen trolley with 3 shelves and double bags > Bags are of 450mm diameter and made of terylene /

canvas > Shelves length 570 > Mounted on 4x100mm antistatic castors and 2 with

brakes

> Supplied in knock down form , complete with tools and instructions for assembly

> Mild Steel Epoxy Powder Coated finish

Material/CoMponents


LINEN TROLLEY MODEL NO. : LH -3M-Mild Steel Overall Dimensions (LxWxH) : 1550 x 470 x 860 mm

lH-3s: Stainless Steel Grade 304 construction

options

Features

Hs-1M: Mild steel construction with wooden seatHs-2s: Stainless Steel grade 304 construction with

stainless steel topHs-3s: Stainless Steel grade 304 construction with

Upholstered top and Upholstered back rest

HOSPITAL STOOLMODEL NO. : HS-4S

> Stool stainless steel with upholstered seat > Seatdiameter 330 mm with rotation of 360° > PU Foam of 21-25Kg/m3 density and 30mm

thickness > Covering made of water resistant and flame

retardant material

> Spring powdered height adjustable from 400-650mm > Mounted on 5x50mm antistatic castors > Stainless Steel high polish finish

Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Mechanical screw3. Antistatic castors4. PU Foam 5. Flame retardant and water resistant vinyl covering

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 rod3. Antistatic swivel castors4. Knob

Features


> I.V. Stand Stainless Steel mobile > Height adjustable > Heavy weighted stainless steel base, weight approx.

5Kg > The stand has double hook rod > Two/Four Ram’s Horn style hooks > The height of the stand is adjustable by means of a

telescoping upright rod

> The adjustable range is from 120 cm to 220 cm. > The height adjustment is capable of being locked in

place with a knob handle > Mounted on 5x50mm anti-static castors, 2 with

brakes > Stainless Steel high polish finish.

Material/CoMponents


I.V. STANDMODEL NO. : IVS-2S

ivs-1s: Heavy weighted PU Base

options

Features

Ws4-1s: Stainless Steel Grade 304 Frame Ws3-1M: Three fold screen with Mild Steel Epoxy Powder

Coated FrameWs3-1s: Three fold screen with Stainless Steel Grade

304 frame

WARD SCREEN MODEL NO. : WS4-1M – Mild Steel Epoxy Powder Coated Overall Dimensions (H x L) : 1750x2480 mm

> Ward screen four fold > Each panel fitted with top and bottom curtain wire. > Each panel width 610mm

> Supplied with washable cotton curtains > Mounted on antistatic castors > Mild Steel Epoxy Powder Coated finish

Material/CoMponents

1. Mild Steel tubular pipe2. Spring wire3. Washable cotton curtains4. Antistatic castors

options



1. Stainless steel Grade 304 tubular pipe2. Stainless steel Grade 304 basin3. Antistatic Castors

Features


> Wash basin stand with ring holder for single basin > Supplied with 4 litre capacity basin > Mounted on 4x50mm antistatic castors, 2 with

brakes

> Stainless Steel high polish finish

Material/CoMponents


WASH BASIN STAND SINGLEMODEL NO. : WBS-4SOverall Dimensions (LxWxH) : 380x400x830mm

Wbs-3s: Mounted on 3x50mm antistatic castorsWbs-1s: Mounted on PU Base

options

Features

WbD-2s: Mounted on PU base

WASH BASIN STAND DOUBLEMODEL NO. : WBD-1S Overall Dimensions (LxWxH) : 740x400x860mm

> Wash basin stand with ring holder for double basin > Supplied with 2 stainless steel basin , capacity 4

liters

> Mounted on 4x50mm antistatic castors, 2 with brakes


Material/CoMponents


options




Features


> Wash basin stand adjustable height > With ring holder for double basin > Supplied with 2 stainless steel basin , capacity 4

liters

> Height adjustable from 600 to 860mm > Mounted on 5 x50mm antistatic castors > Stainless Steel high polish finish

Material/CoMponents


WASH BASIN STAND DOUBLEMODEL NO. : WBD-3S

WbD-4s: Mounted on PU Base

options

Features

Mt-1M: Mild Steel Epoxy Powder Coated frame and Stainless Steel Grade 304 Tray

INSTRUMENT TABLE MAYOMODEL NO. : MT-1S Overall Dimensions (LxWxH) : 600x 480 x10mm

> Instrument table Mayo with sterilizable stainless steel tray

> Height adjustable with telescopic rod with knob from 750 mm to 1400 mm

> Mounted on 4 x50mm antistatic swivel castors

> upplied in semi knock down form, complete with tools and instructions for assembly


Material/CoMponents

1. Stainless Steel grade 304 tubular pipe2. Antistatic swivel Castors3. Stainless Steel Grade 304 sheet4. Knob

options



1. Stainless Steel Grade 304 pipe2. Antistatic Castors3. Stainless Steel Grade 304 sheet4. Knob

Features


> Instrument table Mayo with sterilizable stainless steel tray

> Height adjustable with telescopic rod with knob form 670 mm to 1050 mm

> Mounted on 2x50mm antistatic swivel castors and 2 forefeet to prevent movement

> Supplied in semi knock down form, complete with tools and instructions for assembly. Stainless Steel high polish finish

Material/CoMponents


INSTRUMENT TABLE MAYOMODEL NO. : MT-2S Overall Dimensions (LxW) : 700x 400 mm

Features

ot-1W: Mild Steel Epoxy Powder Coated frame and Wooden Top

OVERBED TABLE MODEL NO. : OT -3M-Mild Steel Top Dimensions (WxD) : 600x400mm

> Over bed table height adjustable from 680mm to 1000mm

> Mounted on 4x50 antistatic swivel castors, 2 with brakes

> Mild steel Epoxy Powder Coated finish > Supplied in knock down form, complete with tools


Material/CoMponents

1. Mild Steel Epoxy Powder Coated tubular pipe2. Mild Steel Epoxy Powder Coated Sheet 3. Antistatic Castors4. Knob/handle

options



1. Mild Steel Epoxy Powder Coated rectangular pipe2. Castors3. Wooden laminated top4. Knob/handle

Features


> Overbed table with top made of laminated wood > Height adjustable form 680 to 1000 mm > Tilting top adjusts from 0 ° to 70 ° > Mounted on 4x50mm antistatic swivel castors, 2

with brakes

> Mild steel Epoxy Powder Coated finish > Supplied in knock down form, complete with tools


Material/CoMponents


OVERBED TABLE MODEL NO. : OT -2M-Mild Steel Top Dimension (WxD) : 600x400mm

Features

Kb-1M: Mild Steel Epoxy Powder Coated frame and Stainless Steel Grade 304 bucket

KICK ABOUT BUCKETMODEL NO. : KB -1S

> Kick about bucket stainless steel > Stainless steel bucket with 12 Litre capacity and with

lid and handle

> Stainless Steel high polish finish > Mounted on 3 x50mm antistatic castors and wheel

buffers

Material/CoMponents

1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 Bucket 3. Antistatic castors4. Wheel Buffers

options



1. Stainless Steel Grade 304 tubular pipe2. Stainless Steel Grade 304 Bowl3. Antistatic castors4. Wheel Buffers

Features


> Kick about bowl with stainless steel frame work > Stainless steel bowl with 6 liter capacity

> Stainless Steel high polish finish > Mounted on 3x50mm antistatic castors

Material/CoMponents


KICK ABOUT BOWLMODEL NO. : KB-2S

Kb-2M: Mild Steel Epoxy Powder Coated frame and Stainless Steel Grade 304 Bowl

options

DeVats (India) Private Limited

E-4 , 2nd Floor, Sector 8Noida – 201 301, U.P, IndiaPhone : +91 120 4245700 – 07Fax : +91 120 4245708Email : [email protected]

Website : www.devats.com

Registered office addressB-459, First Floor,New Friends ColonyNew Delhi – 110025India

Documents

Medical Equipment Furniture - DeVats...> Hospital Bed with inbuilt pullout backrest > Back rest adjustable upto 30 degrees in 3 steps of approx 10 degrees > Mattress platform rigid