MEM20205 Certificate II in Engineering Production Technology … · 2019-03-08 · MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1 Page 4

MEM05 Metal and Engineering

Training Package

Student Name:

Student No:

Recognition Application Version 1.0

TRAINING AND EDUCATION SUPPORT

INDUSTRY SKILLS UNIT

MEADOWBANK

Product Code: 5478

MEM20205 Certificate II in Engineering

– Production Technology

RPL /Credit Forms

SAMPLE

Page 2 of 302

SAMPLE

Page 3 of 302

MEM30305 Certificate III in Engineering – Fabrication Trade Recognition/Credit Tool v1

SAMPLE

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1

Page 4 of 302

Acknowledgments

TAFE NSW Training and Education Support Industry Skills Unit, Meadowbank would like

to acknowledge the support and assistance of the following people in the production of

the TAFE NSW MEM20205 Certificate II in Engineering – Production Technology

Recognition/Credit Tool.

Writer Reviewer

Chris Zvirblis Jim Miles

Project Manager

Stephen Davies

Education Program Manager

TAFE NSW Training and Education Support

Industry Skills Unit, Meadowbank

Further acknowledgements

The following materials have been used as research for this resource:

MEM05 Metal and Engineering Training Package

TLI10 Transport and Logistics v1.1 Training Package

CPC08 Construction, Plumbing and Services v6 Training Package

PMB07 Plastics, Rubber and Cablemaking Training Package

MSA Website www.mskills.com.au

TAFENSW Corporate Systems

http://training.gov.au

Enquiries

Enquiries about this and other publications can be made to:

TAFE NSW Training and Education Support, Industry Skills Unit, Meadowbank

Locked Bag No. 6, MEADOWBANK, NSW 2114

Phone: (02) 9942 3200 Fax: (02) 9942 3257

ISBN-978-1-74236-246-5

© The State of New South Wales, Department of Education and Training,

TAFE NSW, Training and Education Support, Industry Skills Unit,

Meadowbank.

Copyright of this material is reserved to TAFE NSW, Training and Education Support,

Industry Skills Unit, Meadowbank. Reproduction or transmittal in whole or in part,

other than for the purposes of private study or research, and subject to the provisions

of the Copyright Act, is prohibited without the written authority of TAFE NSW, Training

and Education Support, Industry Skills Unit, Meadowbank.

SAMPLE

http://www.mskills.com.au/

http://training.gov.au/

Page 5 of 302


Table of Contents

Instructions on how to use this RPL/Credit resource………..……………………………………………………………10

Important note on prerequisite units……………………………………….……………………………………………………11

SECTION 1: RECOGNITION/CREDIT GUIDES .................................... 13

Core Units ................................................................................................... 13 MEM12023A Perform engineering measurements ....................................................... 13 MEM13014A Apply principles of occupational health and safety in the work environment . 15 MEM14004A Plan to undertake a routine task ............................................................ 16 MEM15002A Apply quality systems ........................................................................... 17 MEM15024A Apply quality procedures ....................................................................... 18 MEM16006A Organise and communicate information .................................................. 19 MEM16007A Work with others in a manufacturing, engineering or related environment ... 20 MEM17003A Assist in the provision of on the job training ............................................ 21 MSAENV272B Participate in environmentally sustainable work practices .......................... 22

Competency Field 03: Assembly ................................................................ 23 MEM03001B Perform manual production assembly ..................................................... 23 MEM03002B Perform precision assembly ................................................................... 24 MEM03003B Perform sheet and plate assembly .......................................................... 26 MEM03004B Perform electronic/electrical assembly (production) .................................. 27 MEM03005B Rework and repair (electrical/electronic production) ................................. 28 MEM03006B Set assembly stations ........................................................................... 29

Competency Field 04: Casting and Moulding ............................................. 30 MEM04001B Operate melting furnaces ...................................................................... 30 MEM04002B Perform gravity die casting .................................................................... 31 MEM04003B Operate pressure die casting machine ..................................................... 32 MEM04004B Prepare and mix sand for metal moulding ............................................... 33 MEM04006B Operate sand moulding and core making machines .................................. 34 MEM04007B Pour molten metal ................................................................................ 35 MEM04008B Fettle and trim metal castings/forgings ................................................... 36 MEM04018B Perform general woodworking machine operations ................................... 37 MEM04019B Perform refractory installation and repair ................................................ 38

Competency Field 05: Fabrication ............................................................. 39 MEM05001B Perform manual soldering/desoldering - electrical/electronic components .... 39 MEM05002B Perform high reliability soldering and desoldering ..................................... 40 MEM05003B Perform soft soldering ........................................................................... 41 MEM05004C Perform routine oxy acetylene welding ................................................... 42 MEM05005B Carry out mechanical cutting ................................................................. 43 MEM05006B Perform brazing and/or silver soldering ................................................... 44 MEM05007C Perform manual heating and thermal cutting .......................................... 45 MEM05009C Perform automated thermal cutting ....................................................... 46 MEM05012C Perform routine manual metal arc welding .............................................. 47 MEM05013C Perform manual production welding ....................................................... 48 MEM05014C Monitor quality of production welding/fabrications ................................... 49 MEM05015D Weld using manual metal arc welding process .......................................... 50 MEM05017D Weld using gas metal arc welding process ............................................... 52 MEM05019D Weld using gas tungsten arc welding process ........................................... 54 MEM05023C Weld using submerged arc welding process ............................................ 56 MEM05041B Weld using powder flame spraying ......................................................... 57 MEM05049B Perform routine gas tungsten arc welding ................................................ 58 MEM05050B Perform routine gas metal arc welding .................................................... 59 MEM05051A Select welding processes ....................................................................... 60 MEM05052A Apply safe welding practices .................................................................. 61 MEM05053A Set and edit computer controlled thermal cutting machines ....................... 62

SAMPLE


Page 6 of 302

Competency Field 06: Forging ................................................................... 63 MEM06001B Perform hand forging ............................................................................ 63 MEM06002B Perform hammer forging ....................................................................... 64 MEM06003C Carry out heat treatment ...................................................................... 65 MEM06004B Select heat treatment processes and test finished product ........................ 66 MEM06005B Perform drop and upset forging .............................................................. 67 MEM06006C Repair springs ...................................................................................... 68 MEM06007B Perform basic incidental heat/quenching, tempering and annealing ............ 69 MEM06008A Hammer forge complex shapes .............................................................. 70 MEM06009A Hand forge complex shapes ................................................................... 71

Competency Field 07: Machine & process operations ................................ 72 MEM07001B Perform operational maintenance of machines/equipment ......................... 72 MEM07003B Perform machine setting (routine) .......................................................... 73 MEM07004B Perform machine setting (complex) ........................................................ 74 MEM07005C Perform general machining .................................................................... 75 MEM07014B Perform electro-discharge (EDM) machining operations ............................. 76 MEM07015B Set computer controlled machines/processes ........................................... 77 MEM07016C Set and edit computer controlled machines/processes .............................. 78 MEM07024B Operate and monitor machine/process .................................................... 79 MEM07025B Perform advanced machine/process operation ........................................ 80 MEM07026B Perform advanced plastic processing ...................................................... 81 MEM07027B Perform advanced press operations ........................................................ 82 MEM07028B Operate computer controlled machines/processes .................................... 83 MEM07029B Perform routine sharpening/maintenance of production tools and cutters .... 84 MEM07030C Perform metal spinning lathe operations (basic) ....................................... 85 MEM07031C Perform metal spinning lathe operations (complex) .................................. 86 MEM07032B Use workshop machines for basic operations ........................................... 87 MEM07033B Operate and monitor basic boiler ............................................................ 89 MEM07034B Operate and monitor intermediate class boiler ......................................... 90 MEM07040A Set multistage integrated processes ....................................................... 91

Competency Field 08: Surface Finishing .................................................... 92 MEM08001B Perform wire, jig and barrel load/unload work .......................................... 92 MEM08002C Pre-treat work for subsequent surface coating ......................................... 93 MEM08003C Perform electroplating operations .......................................................... 94 MEM08004B Finish work using wet, dry and vapour deposition methods ........................ 95 MEM08005B Prepare and produce specialised coatings ................................................ 96 MEM08006B Produce clear and/or coloured and/or sealed anodised films on aluminium .. 97 MEM08007B Control surface finish production and finished product quality .................... 98 MEM08008B Operate and control surface finishing waste treatment process .................. 99 MEM08009C Make up solutions .............................................................................. 100 MEM08010B Manually finish/polish materials ........................................................... 101 MEM08011B Prepare surfaces using solvents and/or mechanical means ...................... 102 MEM08012B Prepare surfaces by abrasive blasting (basic) ......................................... 103 MEM08013B Prepare surfaces by abrasive blasting (advanced) .................................. 104 MEM08014B Apply protective coatings (basic) .......................................................... 105 MEM08015B Apply protective coatings (advanced).................................................... 106 MEM08016B Control blast coating by-products, materials and emissions ..................... 107 MEM08018B Electroplate engineering coatings ......................................................... 108 MEM08019B Electroplate protective finishes ............................................................. 109 MEM08020B Electroplate decorative finishes ............................................................ 110

Competency Field 09: Drawing, drafting and design ............................... 111 MEM09002B Interpret technical drawing .................................................................. 111

Competency field 10: Installation & commissioning ................................ 112 MEM10002B Terminate and connect electrical wiring ................................................. 112 MEM10009B Install refrigeration and air conditioning plant and equipment .................. 113 MEM10010B Install pipework and pipework assemblies ............................................. 114

SAMPLE

Page 7 of 302


MEM10011B Terminate and connect specialist cables ................................................ 115 MEM10013A Install split air conditioning systems and associated pipework .................. 116

Competency field 11: Materials handling ................................................. 117 MEM11001C Erect/dismantle scaffolding and equipment ............................................ 117 MEM11002C Erect/dismantle complex scaffolding and equipment ............................... 118 MEM11003B Coordinate erection/dismantling of complex scaffolding/equipment .......... 119 MEM11004B Undertake dogging ............................................................................. 120 MEM11005B Pick and process order ........................................................................ 121 MEM11006B Perform production packaging .............................................................. 122 MEM11007B Administer inventory procedures .......................................................... 123 MEM11008B Package materials (stores and warehouse) ............................................ 124 MEM11009B Handle/move bulk fluids/gases ............................................................ 125 MEM11010B Operate mobile load shifting equipment ................................................ 126 MEM11011B Undertake manual handling ................................................................. 127 MEM11012B Purchase materials ............................................................................. 128 MEM11013B Undertake warehouse receival process .................................................. 129 MEM11014B Undertake warehouse dispatch process ................................................. 130 MEM11015B Manage warehouse inventory system .................................................... 131 MEM11016B Order materials .................................................................................. 132 MEM11017B Organise and lead stocktakes .............................................................. 133 MEM11018B Organise and maintain warehouse stock receival and/or dispatch system .. 134 MEM11019B Undertake tool store procedures .......................................................... 135 MEM11020B Perform advanced warehouse computer operations ................................ 136 MEM11021B Perform advanced operation of load shifting equipment .......................... 137 MEM11022B Operate fixed/moveable load shifting equipment .................................... 138 MEM11023A Operate a bridge and gantry crane ....................................................... 139 MEM11024A Undertake basic rigging ...................................................................... 140 MEM11025A Operate a non-slewing mobile crane of greater than three tonnes capacity 141

Competency Field 12: Measurement ........................................................ 142 MEM12001B Use comparison and basic measuring devices ........................................ 142 MEM12002B Perform electrical/electronic measurement ............................................ 143 MEM12019B Measure components using coordinate measuring machines .................... 144 MEM12020B Set and operate coordinate measuring machines .................................... 145 MEM12024A Perform computations ......................................................................... 146

Competency Field 13: Occupational Health & Safety ............................... 147 MEM13001B Perform emergency first aid ................................................................ 147 MEM13002B Undertake occupational health and safety activities in the workplace ........ 149 MEM13003B Work safely with industrial chemicals and materials ................................ 150 MEM13004B Work safely with molten metals/glass ................................................... 151 MEM13007B Maintain water treatment systems for cooling towers .............................. 152 MEM13013B Work safely with ionizing radiation ....................................................... 153

Competency Field 14: Planning ............................................................... 154 MEM14005A Plan a complete activity ...................................................................... 154

Competency field 15: Quality .................................................................. 156 MEM15001B Perform basic statistical quality control ................................................. 156 MEM15003B Use improvement processes in team activities ....................................... 157 MEM15004B Perform inspection ............................................................................. 158

Competency field 16: Communication ..................................................... 159 MEM16002C Conduct formal interviews and negotiations ........................................... 159 MEM16004B Perform internal/external customer service ........................................... 160 MEM16005A Operate as a team member to conduct manufacturing, engineering or

related activities ................................................................................ 161 MEM16008A Interact with computing technology ...................................................... 162 MEM16013A Operate in a self-directed team ............................................................ 163

SAMPLE


Page 8 of 302

Competency Field 17: Training ................................................................ 164 MEM17001B Assist in development and deliver training in the workplace ..................... 164 MEM17002B Conduct workplace assessment ............................................................ 166

Competency Field 18: Maintenance and diagnostics ................................ 167 MEM18001C Use hand tools ................................................................................... 167 MEM18002B Use power tools/hand held operations................................................... 168 MEM18003C Use tools for precision work ................................................................. 169 MEM18013B Perform gland packing ........................................................................ 171 MEM18024B Maintain engine cooling systems .......................................................... 172 MEM18025B Service combustion engines................................................................. 173 MEM18026C Test compression ignition fuel systems ................................................. 174 MEM18027C Overhaul engine fuel system components .............................................. 175 MEM18028B Maintain engine lubrication systems ..................................................... 176 MEM18029B Tune diesel engines ............................................................................ 177 MEM18030B Diagnose and rectify low voltage electrical systems ................................ 178 MEM18031B Diagnose and rectify low voltage starting systems .................................. 179 MEM18032B Maintain induction/exhaust systems ..................................................... 180 MEM18033B Perform engine bottom-end overhaul .................................................... 181 MEM18035B Diagnose and rectify braking systems ................................................... 182 MEM18037B Diagnose and rectify low voltage charging systems................................. 183 MEM18038B Maintain wheels and tyres ................................................................... 184 MEM18039B Diagnose and rectify track type undercarriage ....................................... 185 MEM18040B Maintain suspension systems ............................................................... 186 MEM18041B Maintain steering systems ................................................................... 187 MEM18042C Diagnose and rectify manual transmissions ........................................... 188 MEM18043C Diagnose and rectify automatic transmissions ........................................ 189 MEM18044C Diagnose and rectify drive line and final drives ....................................... 190 MEM18055B Dismantle, replace and assemble engineering components ...................... 191 MEM18063B Terminate signal and data cables ......................................................... 192 MEM18071B Connect/disconnect fluid conveying system components ......................... 193 MEM18072B Manufacture fluid conveying conductor assemblies ................................. 194 MEM18084A Commission and decommission split air conditioning systems .................. 195 MEM18085A Install, service and repair domestic air conditioning and refrigeration

appliances ......................................................................................... 196 MEM18086B Test, recover, evacuate and charge refrigeration systems ....................... 197 MEM18098A Prepare to perform work associated with fuel system installation and

servicing ........................................................................................... 198

Competency field 19: Jewellery and horological ...................................... 199 MEM19001B Perform jewellery metal casting ........................................................... 199 MEM19002B Prepare jewellery illustrations .............................................................. 200 MEM19003B Handle gem materials ......................................................................... 201 MEM19004B Handle and examine gemstone materials .............................................. 203 MEM19005B Produce three-dimensional precision items ............................................ 204 MEM19006B Replace watch batteries ...................................................................... 205 MEM19007B Perform gemstone setting ................................................................... 206 MEM19008B Prepare jewellery designs .................................................................... 207 MEM19009B Perform investment procedures for lost wax casting process .................... 208 MEM19010B Produce rubber moulds for lost wax casting process ............................... 209 MEM19011B Perform wax injection of moulds for lost wax casting process ................... 210 MEM19012B Produce jewellery wax model ............................................................... 212 MEM19013B Produce jewellery metal masters .......................................................... 213 MEM19014B Perform hand engraving ...................................................................... 214 MEM19015B Perform jewellery enamelling ............................................................... 215 MEM19016B Construct jewellery components ........................................................... 216 MEM19017B Fabricate jewellery items ..................................................................... 217 MEM19018B Repair jewellery items ........................................................................ 218 MEM19020B Fault-find and maintain micro-mechanisms............................................ 219 MEM19021B Diagnose and service micro-mechanisms .............................................. 220

SAMPLE

Page 9 of 302


Competency field 20: Locksmithing ......................................................... 222 MEM20001A Produce keys ..................................................................................... 222 MEM20002A Assemble and test lock mechanisms ..................................................... 223 MEM20003A Install and upgrade locks and hardware ................................................ 225 MEM20004A Gain entry ......................................................................................... 226 MEM20006A Maintain and service mechanical locking devices .................................... 228 MEM20014A Perform a site security survey .............................................................. 229

Competency Field 21: Horology ............................................................... 230 MEM21001A Replace watch batteries, capacitors and bands ....................................... 230 MEM21002A Perform watch movement exchange ..................................................... 231 MEM21003A Perform watch case servicing, repair and refurbishment .......................... 233 MEM21004A Clean watch and clock components ....................................................... 234 MEM21005A Diagnose faults in quartz watches ........................................................ 235 MEM21006A Service quartz watches ....................................................................... 236 MEM21007A Service complex quartz watches........................................................... 237 MEM21008A Service mechanical watches ................................................................ 238

Competency field 24: Non-destructive testing ......................................... 239 MEM24001B Perform basic penetrant testing ........................................................... 239 MEM24003B Perform basic magnetic particle testing ................................................. 240

Competency field 25: Marine craft construction ...................................... 241 MEM25001B Apply fibre-reinforced materials ........................................................... 241 MEM25002B Form and integrate fibre-reinforced structures ....................................... 242 MEM25004B Fair and shape surfaces ...................................................................... 243 MEM25006B Undertake marine sheathing operations ................................................ 244 MEM25007B Maintain marine vessel surfaces ........................................................... 245 MEM25011B Install marine systems ........................................................................ 246 MEM25012B Install and test operations of marine auxiliary systems ........................... 248 MEM25014B Perform marine slipping operations ...................................................... 249 MEM25015A Assemble and install equipment and accessories/ancillaries ..................... 250

Competency field 50: Boating services .................................................... 251 MEM50002B Work safely on marine craft ................................................................. 251 MEM50003B Follow work procedures to maintain the marine environment ................... 252 MEM50004B Maintain quality of environment by following marina codes ...................... 254 MEM50009B Safely operate a mechanically powered recreational boat ........................ 255

Imported Units ........................................................................................ 256 CPCCLDG3001A Licence to perform dogging ................................................................. 256 CPCCLRG3001A Licence to perform rigging basic level ................................................... 258 CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level ..................... 259 CPCCLSF3001A Licence to erect, alter and dismantle scaffolding intermediate level .......... 260 TLILIC0012A Licence to operate a vehicle loading crane (capacity 10 metre tonnes and

above) .............................................................................................. 261 TLILIC2001A Licence to operate a forklift truck ......................................................... 263 TLILIC2002A Licence to operate an order picking forklift truck .................................... 265 TLILIC3003A Licence to operate a bridge and gantry crane ......................................... 267 TLILIC3006A Licence to operate a non-slewing mobile crane (greater than three tonnes

capacity) ........................................................................................... 269 PMBPROD291B Operate resin infusion moulding equipment ........................................... 271 PMBPROD294B Operate resin transfer moulding equipment ........................................... 272 PMBPROD298B Operate equipment using pre-preg material ........................................... 273 PMBPROD391B Produce composites using resin infusion ................................................ 274 PMBPROD394B Produce composites using resin transfer moulding .................................. 275 PMBPROD398B Produce composites using pre-pregs ..................................................... 276

Blank Template for Elective Choices (other Training Packages / imported units) . 277

SAMPLE


Page 10 of 302

SECTION 2: TEMPLATES AND REPORTS .......................................... 281

Attachment 1: Resumé of employment, education and life experiences .......................... 281 Attachment 2: Portfolio of supporting evidence ........................................................... 283 Attachment 3: Supervisor’s report ............................................................................. 284 Attachment 4: Third party report ............................................................................... 286 Attachment 5: Candidate recognition/credit skills gap training plan ............................... 289

Appendix A………………………………………………………………………………………..251

SAMPLE

Page 11 of 302


INSTRUCTIONS ON HOW TO USE THIS RPL/CREDIT RESOURCE

You have chosen to seek recognition/credit for competency units from MEM20205

Certificate II in Engineering-Production Technology, TAFE NSW course number 9035.

Simply follow the steps listed below when submitting your application.

Step 1 Carefully read the requirements of the qualification (MEM20205) as specified in

the MEM05, Metal and Engineering Training Package. See Appendix A.

Step 2 Ensure you have a valid enrolment in the qualification you are seeking

recognition / credit for.

Step 3 Discuss your recognition proposal / application with the training provider or

relevant teaching section and follow the processes and time frames they have

indicated.

Step 4 Select the competency unit or units you are seeking recognition/credit for, see

Section 1: Recognition/Credit Guides for details of units and elements.

Step 5 If possible, provide approximately 3 forms of evidence, to enable the

assessor(s) to make a sound judgement against the unit(s) you are seeking

recognition for. See Section 1: Suggested supporting evidence columns in

each of the Recognition Guides for examples of evidence required.

Step 6 Document your claim for a given unit(s) on the forms provided, see Section 2:

Templates and Reports and populate attachments 1 to 5 with relevant

evidence to support your claim.

You may complete the forms you need on a computer, then:

o print them

o sign/initial and date each page, where required

o collate them, with the cover page

o present them to your assessor for processing

To help with formatting, the number of characters on each line has been

limited. Because it is impossible to predict exactly what space your entries

will need, you may find occasionally that you need to use abbreviations to fit

your entries into the space allocated. Otherwise you may introduce extra lines

of text that will upset the pagination of this document

Where provision has been made for more than one line of text to go in, you

will need to click on, or tab down to, a new line before you can use it.

Step 7 Submit your application to the Training provider (teaching section). This can be

done by printing the relevant forms contained in this resource as indicated

above. You may also choose to give the Training Provider an electronic copy of

your application.

SAMPLE


Page 12 of 302

Step 8 Wait for a response from your assessors.

Important note on prerequisite units

A vital step in the recognition process is to find out if the unit or units you are

seeking recognition against require any prerequisite units to support them. If the

competency unit has a prerequisite unit or units you must provide sufficient

evidence (knowledge and skills) to support your claim before the recognition process

can proceed further.

For complete details of individual units go to the following link http://training.gov.au or

for specific MEM05 units go to: http://training.gov.au/Training/Details/MEM05

The above links will provide you with a specific range of knowledge and skills

expected of the unit(s) along with any pre-requisite and/or co-requisites for a given

unit. If you are uncertain of specific details relating to a given unit(s) contact your

local TAFE teaching campus for further information.

SAMPLE

http://training.gov.au/

http://training.gov.au/Training/Details/MEM05

Page 13 of 302


Section 1: Recognition/Credit Guides

Core Units

MEM12023A Perform engineering measurements

Unit description: This unit covers performing measurement skills requiring straightforward use of mechanical measuring devices and

associated calculations.

For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM12023A

Critical aspects of assessment

Refer also to elements, performance

criteria and essential skills and knowledge

Suggested supporting

evidence

Assessor’s validation of

evidence Outcomes

1. Select appropriate device or

equipment.

2. Obtain measurements using a range of measuring devices.

3. Maintain measuring devices.

4. Communicate measurements as required.

Assessment tools

Performance appraisals

Position description

Referral evidence

Reports

Sample of work/project

Screening tools

Supervisor’s report

Third party reports

Training transcripts


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents

Other (please specify)

Competent

Skills gap training

required

Further information

required

Assessor’s name:

Assessor’s initials:

_____________________

Date:

SAMPLE

http://training.gov.au/Training/Details/MEM12023A

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1

Page 14 of 302

_____________________

SAMPLE


Page 15 of 302

MEM13014A Apply principles of occupational health and safety in the work environment

Unit description: This unit covers following occupational health and safety procedures in an engineering or similar work environment.






evidence


evidence Outcomes

1. Follow safe work practices.

2. Report workplace hazards and

accidents

3. Follow emergency procedures

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 16 of 302

MEM14004A Plan to undertake a routine task

Unit description: This unit covers a person planning their own work where tasks involve one or more steps or functions and are

carried out routinely on a regular basis. It includes the concepts of following routine instructions, specifications and

requirements.






evidence


evidence Outcomes

1. Identify task requirements.

2. Plan steps required to complete task.

3. Review plan

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 17 of 302

MEM15002A Apply quality systems

Unit description: This unit covers working within a quality improvement system, either individually or in a team situation.






evidence


evidence Outcomes

1. Work within a quality system

2. Engage in quality improvement

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 18 of 302

MEM15024A Apply quality procedures

Unit description: This unit covers applying established quality procedures to an employee's own work within a manufacturing,

engineering or related environment.






evidence


evidence Outcomes

1. Take responsibility for own quality

2. Apply standard procedures of

workplace quality to own job

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 19 of 302

MEM16006A Organise and communicate information

Unit description: This unit covers accessing, organising and communicating information related to processes or tasks.






evidence


evidence Outcomes

1. Access information and/or records

2. Organise and analyse information

3. Communicate organised information

using established workplace methods

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 20 of 302

MEM16007A Work with others in a manufacturing, engineering or related environment

Unit description: This unit covers operating in an interactive work environment. It covers contribution to a group effort in order to

plan and carry out work. This work includes identification of work roles, communication and co-operation with

others.






evidence


evidence Outcomes

1. Identify roles and responsibilities

2. Plan activities

3. Work with others

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 21 of 302

MEM17003A Assist in the provision of on the job training

Unit description: This unit covers assisting in the provision of on the job training to others while undertaking normal duties.






evidence


evidence Outcomes

1. Determine role of on the job training

2. Provide on the job training

3. Report on trainee performance

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE



Page 22 of 302

MSAENV272B Participate in environmentally sustainable work practices

Unit description: This competency covers the outcomes required to effectively measure current resource use and carry out

improvements including those reducing negative environmental impacts of work practices.

For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MSAENV272B





evidence


evidence Outcomes

1. Identify current resource use and

environmental issues

2. Comply with environmental

regulations

3. Seek opportunities to improve

environmental practices and resource

efficiency

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE

http://training.gov.au/Training/Details/MSAENV272B


Page 23 of 302

Competency Field 03: Assembly

MEM03001B Perform manual production assembly

Unit description: This unit covers assembling components and/or sub-assemblies in a production environment and testing the

components and/or sub-assemblies to ensure compliance with specifications.

For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM03001B





evidence


evidence Outcomes

1. Read and understand job sheets

2. Select assembly equipment and

components

3. Assemble components

4. Perform tests

5. Protect assembly from damage

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE

http://training.gov.au/Training/Details/MEM03001B


Page 24 of 302

MEM03002B Perform precision assembly

Unit description: This unit covers assembling and testing complex engineering components and mechanical assemblies in a

production, manufacturing environment

For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM03002B





evidence


evidence Outcomes

1. Read and understand job sheets

2. Select and use assembly tools and

equipment

3. Assemble engineering components

4. Adjust mechanical assemblies

5. Protect assembly from damage

Assessment tools



Referral evidence

Reports


Screening tools


Third party reports

Training programs


Workplace evidence

Interviewing

Questioning

Reports

Supervision reports

Skill demonstration

Third party reports

Work based project

Workplace documents


Competent

Skills gap training

required

Further information

required

Assessor’s name:


_____________________

Date:

_____________________

SAMPLE

http://training.gov.au/Training/Details/MEM03002B


Page 25 of 302

SAMPLE

Documents

MEM20205 Certificate II in Engineering Production Technology … · 2019-03-08 · MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1 Page 4