Metris Compressed Air Brochure UK

7/30/2019 Metris Compressed Air Brochure UK

1/6

Innovation forcost reduction

in pneumatics.Leakage monitoring.Measurement ofcompressed air consumption.

Measuremen

tofcompressedairconsumption

www.if

m-e

lectronic.c

om

/metris

R


2/6

MODE/ENTER SET

Decentralised monitoring, measurementand display of compressed air consumption.

Many sources,

including the cam-

paign efficient

compressed air*

clearly indicate the

growing interest

in the optimised

use of the energy

carrier compressed

air. This is a sub-

stantial saving

potential for

operating costs.

efectormetris

helps to explore

this potential.

Measurement ofcompressed air consumption

Optimised consumptionof compressed air

Allocationof consumed quantities

The integral

4-digit LED display

plus the statusLEDs allow infor-

mation to be avail-

able at the point

of monitoring.

Whether peak

consumption,

present or accu-

mulated consump-

tion: Set switch or

alarm levels can be

accessed and

programmed via

pushbutton.All settings can be

protected using

the electronic lock

function.

8 Nm3/h

12Nm3/h

5.5Nm3/h

* See

www.druckluft-effizient.de


3/6

480

6,096

16,176

63,360

144

1,488

3,984

15,840

1.0

12.7

33.7

132.0

0.3

3.1

8.3

33.0

1.8

20.8

58.5

235.2

1.2

11.1

30.9

123.8

1

3

5

10

Hole

[mm]

Airloss

at6 bar[l/s]

Airloss

at12 bar

[l/s]

Energyloss

kWhat

6 bar

Energyloss

kWhat

12 bar

Costat

6 bar

[EUR]

Costat

12 bar

[EUR]

The installation

of several measur-

ing points in the

compressed air

system clearly

shows where and

how much com-

pressed air is con-

sumed. Thus the

consumption can

be allocated to

production

processes or prod-

ucts for optimising

cost structure.

Decentralised

location ofefector

metris in the sup-

ply pipe to the

individual

machine unit.

Location of

efectormetris in

the supply pipe

prior to distribu-

tion to several

installations or

machine units.

eakage monitoring

Two reliable indications of air leakageare the increase in consumption of com-pressed air with unchanged machine

load and the continuing consumptionof compressed air when the machine isno longer in operation.

Leakage at a glance.

The compressed air meters integratedpipe length ensures easy mountingand high measurement accuracy.

Easy to mountin the supply system.

R

Annual energy costs due to leakage:

kWh x 0.06 EUR x 8000 operating hours/a.;

Source: www.druckluft-effizient.de


4/6

MODE/ENTER SET

From now on: Accurate monitor-

ing of compressed air consump-

tion with efector metris.

The low purchase price makes it

possible: To measure compressed

air where it is used.

Even very small leaks are detect-

ed and can be repaired in good

time.

The quantities consumed can be

directly allocated to the relevant

production units.

In situ display of total or current

consumption.

Switching, pulse or analogue

outputs for further external

processing.Determine maintenance intervals

depending on consumption.

Measurement free from pressure

loss due to a special design of

the measuring probes.

Response time in the millisecond

range.

Calorimetricmeasuring principle

Integrated

display fordirectindication ofconsumption.

Even small leaks

can cause unneces-sary electricity

costs of several

thousand Euro

per year.

The calorimetric

principle measures

the standard

volume flow

irrespective of

temperature and

pressure quickly

and over a wide

measuring range.

Leakage detection, energy costreduction and environmental protection.


5/6

*SP = switch point, **ASP = analogue start point, ***AEP = analogue end point

Application

Electrical design

Connection

Compressed air in industrial use

DC PNP

4-wire

Technical data efector metris

Output 1

Output 2 (programmable)

Operating voltage [V]

Current rating [mA]

Short-circuit protection, pulsed

Reverse polarity/overload prot.

Analogue output

Pressure resistance [bar]

Medium temperature [C]

Power on delay time

Response time [s]

Measuring error in themeasuring range

Repeatability

Function displaySwitching statusDisplay

Connection

19...30 DC

2 x 250

4...20 mA (max. 500 )

16

0...60 (max. 90 % relative air humidity)

0.5 s

< 0.1

(3 % measured value + 0.3 % final value of the measuring range)

1 % of the measured value

2 x yellow4-digit alphanumeric display

Operating temperature [C] 0...60

Protection IP 65 III

Material housing PBT-GF20; PC; Makrolon; stainless steel (304S15); Viton

Material sensor stainless steel (304S15); ceramics; PEEK; polyester

M 12 connector

2 x NC /NO programmable or 1 x NC /NO programmableand 1 x analogue 4...20 mA

or 1 x NC/ NO programmable and 1 x pulse output (1 pulse = 1 l or 1 m3)

Measuring range[Nl/min / Nm3 / h]

Setting rangeSP* [Nl/min / Nm3 / h]ASP** [Nl/min / Nm3 / h]AEP*** [Nl/min / Nm3 / h]

Pipe connection

Order no.

Sockets

DescriptionOrder

no.

2 m PUR, M 12 straight, without LED E10906

5 m PUR, M 12 straight, without LED E10907

76,

8

45

LEDdisplay

programmingbuttons

R

90

300

16,1

21,3

M12x1

100

111,5

Example: SD6000

4...1,250 /0.25...75

12.5...3,750 /0.75...225

6...1,250 / 0.4...750...938 / 0...56.3

313...1,250 / 18.8...75

19...3,750 / 1.1...2250...2,812 / 0...169

937...3,750 / 56...225

DN15 DN25

SD6000 SD8000

0.039...11.67 x 103/2.3...700

0.0...11.67 x 103/ 4...7000.0...8.75 x 103/ 0...525

2.92...11.67x103/175...700

DN50

SD2000

22.2...8,000 /1.3...400

30...6,670 / 2...4000...5,130 / 0...307.5

1,710...6,670 / 102...400

DN40

SD9000


6/6

Over 70 locations worldwide at a glance at www.ifm-electronic.com

ifmarticleno.

7511082

Wereservetherighttomaketechnicalalterationswitho

utpriornotice.PrintedinGermanyonnon-chlorineblea

chedpaper.01/05

ifm electronic gmbh

Teichstrae 4D-45127 EssenTel. 02 01 / 2 42 20

Fax 02 01 / 2 42 22 00e-mail:

[email protected]

http://w

ww.ifm-electro

nic.com

visitou

rwebsit

e

Position sensors

Proximity switches

Actuator sensors

Photoelectric sensors

Photoelectric systems

Incremental andabsolute encoders

Evaluation systems

Power supplies

Fluid sensors

and diagnostic systems

Inductive sensors for valves

Level sensors

Flow sensors

Pressure sensors

Vacuum sensors

Temperature sensors

Diagnostic systems

Networkingand control

Industrial communicationAS-Interface

Control systems

ifm electronic

Documents

Metris Compressed Air Brochure UK