Midea WIFI air conditioner connection Raymond 2014.10.09

Embed Size (px)

Text of Midea WIFI air conditioner connection Raymond 2014.10.09

PowerPoint

Midea WIFI air conditioner connectionRaymond2014.10.091. WIFI module connected with Router setting2. Home mode setting 3. Outdoor mode settingAir conditioner can be controlled by smart phones or PC.UnfashionableNew eraWhat is WIFI Air-conditioner?

WIFI air conditioner=FashionableIntelligent+What is WIFI air-conditioner?

Air conditioners controlled by mobile phone, IPad or computer with wireless router and internet.General control solution

Home Mode Via the router to control all the air-conditioners at home

Outdoor ModeVia internet to control all the air-conditioners inside the house.

IOS Android

Home Mode

Wifi Module

Router

Outdoor Mode

IOS Android

Wifi Module

Router

WIFI module connected with Router settingNote1. How AC enters AP mode: Press the LED button on the remote controller several times until the indoor unit display shows AP within 3 minutes after the AC is powered on again.2. Please finish the connection within 8 minutes after the AC entering AP mode. If time exceeds 8 minutes, please power off , power on, and repeat from step 1.

Home mode setting1. This setting should goes after the WIFI module connected with Router setting.Note

Outdoor mode settingNote1. Phone is able to access to the Internet.3. This setting should goes after the WIFI module connected with Router setting. And when the WIFI module is connected with the Router, please wait about 1 minutes, or the APP will give out Terminal is offline.2. Router that the WIFI module connected with in the WIFI module connected with Router setting is able to access to the Internet .

Thank You!

Midea Strategic Partners:

Phone connects with WIFI module after AC entering AP modeWIFI module connected with Router setting

Press Network

Choose the Router you want to connect with

Connection is built after entering the Router password

If you want to connect another AC (WIFI module) to the Router, please start from the beginning.Phone choose the WIFI source that the WIFI module connected with in WIFI module connected with Router setting.

Home mode setting

Press Local button, neglecting the user name and password

Choose the AC you want to controlIf you want to add another AC, please make sure the AC(WIFI module) has been connected to the Router in the WIFI module connected with Router setting

Control Page

Press User buttonOutdoor mode setting

Choose Registration

Press Agree

Type in the username and password, press OK to finish the registration.

Go back to the Login page, and type in username and password, press Remote to login in.

Press Bind to realize the identity between user and AC.

Scan or type in QR codePress OK to finish the Bind process

Choose the AC you want to control.If you want to add another AC, please start from the Bind process in step 6 and the AC(WIFI module) has been connected to the Router in the WIFI module connected with Router setting

Control page