Embed Size (px)
Citation preview
MILLENNIUM SERIES - H115G1LProgressive Cavity Pump
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
Pump DescriptionThe Liberty Millennium Series H115G1L Heavy Duty ProgressiveCavity Pump is ideal for high viscosity liquids and heavy waste solids and other abrasive pumping applications such polymer feed in water treatment facilities. The H115G1L's flow rate of 115 gallons/100 revolutions @ 406 to 517 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit makes it an ideal solution for your industrial heavy-duty pumping needs.
The H115G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures making it an ideal low-cost, maintenance free drop-in replacement pump. Standard suction and discharge flange size for the H115G1L is 8".
The Millennium Series low shear and gentle pumping action enables it to pump delicate fluids and not emulsify the liquid making it an ideal polymer pump or oil/water separation pump. Solids handling capability of up to up to 50% by weight allows even the toughest application to be pumped. The Millennium's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton, EPDM and Natural Rubber.
All other wetted parts are either carbon steel or 316 stainless steel.The standard seal design is a set of packing with a Lantern Ring and flush connectors. Mechanical seal options are readily available.
Contact a Liberty Process Equipment Representative today for more information about the Millennium H115G1L Series of Progressive Cavity Pumps for Waste Solids.
CurvesClick Links Below
Features
MaterialsRotor:
Stator:
Motor:
Inlet:
Chrome-Plated Tool Steel or Stainless Steel
Buna Nitrile, Natural Rubber, Viton™, EPDM
7.5 - 40 hp
8”
Outlet: 8” - ANSI Flange
Bases: Steel and Stainless Steel
• Low Shear• Solids Handling up to 50%• Hardened Joints• Packing or Mechanical Seal• 3-Stage Options• Steel or Stainless Steel
1-Stage1H115G1L
1-Stage1H115G1L
2-Stage2H115G1L
2-Stage2H115G1L
DrawingsClick Links Below
406 443.5 481 517
G P M
Millennium H115G1L 406-517
85-350GPM
PSI
MILLENNIUM SERIES - 1H115G1LProgressive Cavity Pump
Performance Curves
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
1 Stage Pump70 Durometer (Performance based on water)
600
500
400
300
200
100
0
40
35
30
25
20
15
10
5
0
PU
MP
CA
PAC
ITY
(GP
M)
0 50 150 200 250 300 350 400 500100 450
0 50 150 200 250 300 350 400 500100 450
PUMP SPEED (RPM)
AB
SO
RB
ED
PO
WE
R (
HP
)
70 Durometer
MILLENNIUM SERIES - 2H115G1LProgressive Cavity Pump
Performance Curves
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
2 Stage Pump70 Durometer (Performance based on water)
600
500
400
300
200
100
0
70
60
50
40
30
20
10
0
PU
MP
CA
PAC
ITY
(GP
M)
0 50 150 200 250 300 350 400 500100 450
0 50 150 200 250 300 350 400 500100 450
PUMP SPEED (RPM)
AB
SO
RB
ED
PO
WE
R (
HP
)
MILLENNIUM SERIES - 1H115G1LProgressive Cavity Pump
Dimensional Drawings
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.78551 Stage Pump
≈ lbs.
Net weight
1700
66.5” (+/- 0.25)
30.88” (+/- 0.12)
19.5”
11”
14”
2.875” Shaft Dia.Keyway 0.75” x 0.375”
Suction (TOP)8” Flange ANSI B16.1 FF
9.5”11.875” 30” 15.12”
(Pump Rotation is Clockwise) ALL DIMN: Inches
15”
13”
Discharge (END)8” FlangeANSI B16.1 FF
HoleSize1”
14”
MILLENNIUM SERIES - 2H115G1LProgressive Cavity Pump
Dimensional Drawings
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.78552 Stage Pump
≈ lbs.
Net weight
1850
89.88” (+/- 0.25)
54.25” (+/- 0.12)
19.5”
11”
14”
14”
2.875” Shaft Dia.Keyway 0.75” x 0.375”
Suction (TOP)8” Flange ANSI B16.1 FF
9.5”11.25” 24” 30” 15.12”
(Pump Rotation is Clockwise) ALL DIMN: Inches
15”
13”
Discharge (END)8” FlangeANSI B16.1 FF
HoleSize1”
