APPLICATIONS ■ Normal and corrosive service ■ Single-string completions

BENEFITS ■ Precise alignment and insertion of

side pocket devices into the mandrel side pocket

■ Large tools deflected into the tubing bore

FEATURES ■ An orienting sleeve ■ An integral discriminator pocket ■ Availability in a variety of materials

Camco gas lift MMM series side pocket mandrels feature a one-piece pocket, an orienting sleeve for positive kickover tool alignment in highly deviated wells, and a tool discriminator to exclude larger slickline tools from the pocket area. These mandrels are available in a range of tubing connection sizes and incorporate all the standard design features of Camco side pocket mandrels.

The MMM series mandrels have OD and ID configurations similar to the premium, industry-standard Camco MMG series side pocket mandrels. The MMM mandrels also have internal and external test pressure ratings equal to those of the MMG mandrels of the same size and configuration. In addition, the casing compatibility of the MMM series is equal to that of the MMG series with equivalent OD, size, and configuration.

MMM series mandrels are available in a range of fully traceable materials and can be heat treated to comply with NACE International specification MR0175 for stress-cracking-resistant metallic materials.

MMM series side pocket mandrel.

MMM Series Side Pocket MandrelsOval machined side pocket mandrels for 1.5-in [38.1-mm] valves

MMM Series Side Pocket Mandrels

*Mark of SchlumbergerOther company, product, and service names are the properties of their respective owners.Copyright © 2012 Schlumberger. All rights reserved. 12-AL-0070

slb.com/gaslift

Engineering Data for MMM Series Side Pocket Mandrels

Tubing Size† in [mm]

Major OD in [mm]

Minor OD in [mm]

Internal Drift in [mm]

Test Pressure Internal‡ Test Pressure External‡Latch Type Kickover

ToolNormal Service Corrosive Service Normal Service Corrosive Service2.875 [73.0] 5.500 [139.7] 4.594 [116.7] 2.347 [59.6] 7,500 [51,713] 6,000 [41,370] 6,000 [41,370] 5,000 [34,475] RK, RK-1, RKP OM, TP3.500 [88.9] 5.968 [151.6] 5.000 [127.0] 2.867 [72.8] 8,000 [55,160] 7,000 [48,265] 6,000 [41,370] 5,500 [37,923] RK, RK-1, RKP OM, TP4.500 [114.3] 7.031 [178.6] 5.624 [142.9] 3.833 [97.4] 7,500 [51,713] 6,000 [41,370] 5,500 [37,923] 5,000 [34,475] RK, RK-1, RKP OM, TP† Additional sizes and pressure ratings are available upon request.‡ Test pressures listed are all for low-alloy steel, heat-treated for normal or corrosive conditions. These pressures may be reduced because of end connection limitations.

Guide to MMM Series Side Pocket AccessoriesGas Lift Valve Equalizing

Dummy ValvesDummy Valves

Shear Orifice Valves

Circulating Valves

Chemical Injection Valves

Waterflood Flow Regulator Valves

R-20-02 CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

R-25P CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

RP-6 CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

O21-R CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

O2-30R CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

NOVA-15 CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD

RDO-20 CEV RD SO2-30R RGR-2, RKFS, RCS, RG-1 C-31R, RCB RWF-B, RWFD